ZH
RU
ES
Batch testing of indoor air
Batch testing of indoor air, Total:254 items.
In the international standard classification, Batch testing of indoor air involves: Air quality, Installations in buildings, Thermodynamics and temperature measurements, Services, Environmental testing, Miscellaneous domestic and commercial equipment, Environmental protection, Physical planning. Town planning, Construction industry, Commercial vehicles, Refrigerating technology, Road vehicles in general, Applications of information technology, Quality, Transport, Ventilators. Fans. Air-conditioners, Civil engineering in general, Alarm and warning systems, Electrical equipment for working in special conditions, Analytical chemistry.
RU-GOST R, Batch testing of indoor air
AENOR, Batch testing of indoor air
- UNE 171330-2:2014 Indoor air quality. Part 2: Indoor air quality inspection procedures.
- UNE-EN 14412:2005 Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance
- UNE-EN 50543:2011 Electronic portable and transportable apparatus designed to detect and measure carbon dioxide and/or carbon monoxide in indoor ambient air - Requirements and test methods
Association of German Mechanical Engineers, Batch testing of indoor air
- VDI 4300 Blatt 7-2001 Indoor-air pollution measurement - Measurement of indoor air change rate
- VDI 4300 Blatt 8-2001 Measurement of indoor air pollution - Sampling of house dust
- VDI 6022 Blatt 4-2012 Ventilation and indoor-air quality - Qualification of personnel for hygiene checkings, hygiene inspections, and assessment of indoor-air quality
- VDI 4300 Blatt 10-2008 Measurement of indoor air pollution - Measurement strategies for determination of mould fungi in indoor environment
- VDI 4300 Blatt 11-2013 Measurement of indoor air pollution - Measurement strategies for determination of airborne particles in indoor environment - PM2,5-fraction
- VDI 4300 Blatt 4-1997 Indoor air pollution measurement - Measurement strategy for pentachlorophenol (PCP) and γ-hexachlorocyclohexane (lindane) in indoor air
- VDI 6022 Blatt 4.1-2014 Ventilation and indoor-air quality - Qualification of personnel for hygiene checkings, hygiene inspections, and assessment of indoor air quality - Certificate of competence in Category A and Category B
- VDI 4300 Blatt 9-2005 Measurement of indoor air pollution - Measurement strategy for carbon dioxide (CO2)
- VDI 4300 Blatt 1-1995 Indoor-air pollution measurement - General aspects of measurement strategy
- VDI 3484 Blatt 2-2001 Gaseous ambient air measurements - Indoor-air pollution measurements - Measurement of the formaldehyde concentration with the acatylacetone method
- VDI 4301 Blatt 4-2007 Measurement of indoor air pollution - Measurement of pyrethroids and piperonyl butoxide in air, house dust and solvent wipe samples
- VDI 4301 Blatt 4-2016 Measurement of indoor air pollution - Measurement of pyrethroids and piperonyl butoxide in air
- VDI 3492-2004 Indoor air measurement - Ambient air measurement - Measurement of inorganic fibrous particles - Scanning electron microscopy method
- VDI 3492-2013 Indoor air measurement - Ambient air measurement - Measurement of inorganic fibrous particles - Scanning electron microscopy method
- VDI 2464 Blatt 2-2009 Ambient air measurement - Indoor air measurement - Measurement of polychlorinated biphenyls (PCBs) - HR-GC/HR-MS method for coplanar PCBs
- VDI 4301 Blatt 6-2012 Measurement of indoor air pollution - Measurement of phthalates with GC/MS
- VDI 3484 Blatt 1-2001 Gaseous ambient air measurements - Indoor-air pollution measurements - Test gases measurements; Measurement of the formaldehyde concentration with the sulfite pararosaniline method
- VDI 2464 Blatt 1-2009 Ambient air measurement - Indoor air measurement - Measurement of polychlorinated biphynyls (PCBs) - GC/MS method for PCB 28, 52, 101,138, 153, 180
- VDI 2100 Blatt 1-2008 Gaseous ambient air pollution measurement - Indoor air pollution measurement - Gas chromatographic determination of organic compounds - Fundamentals
- VDI 2464 Blatt 3-2012 Ambient air measurement - Indoor air measurement - Measurement of polybrominated diphenylether, hexabromocyclododecane and hexabromobenzene by GC/MS
- VDI 2100 Blatt 4-2003 Gaseous ambient air measurement - Indoor air pollution measurement - Gas chromatographic determination of organic compounds; Calibration procedures as a measure for quality assurance
- VDI 6022 Blatt 5-2016 Ventilation and indoor-air quality - Avoidance of allergenic exposure - Requirements regarding the testing and evaluation of technical products and components affecting the indoor air
- VDI 2100 Blatt 4-2015 Gaseous ambient air measurement - Indoor air pollution measurement - Gas chromatographic determination of organic compounds - Methods of preparing calibration gases and calibration solutions
- VDI 3498 Blatt 1-2002 Ambient air measurement - Indoor air measurement - Measurement of polychlorinated dibenzo-p-dioxins and dibenzofurans; Method using large filters
- VDI 3498 Blatt 2-2002 Ambient air measurement - Indoor air measurement - Measurement of polychlorinated dibenzo-p-dioxins and dibenzofurans; Method using small filters
- VDI 4301 Blatt 1-1997 Indoor air pollution measurement - Determination of the concentration of nitrogen dioxide - Manual photometric method (Saltzman)
- VDI 4301 Blatt 3-2003 Measurement of indoor air pollution - Measurement pentaclorophenol (PCP) and γ-hexachlorcyclohexane (lindane) - GC/ECD method
- VDI 4301 Blatt 2-2000 Indoor air pollution measurement - Measurement of pentaclorphenol (PCP) and γ-hexachlorcyclohexane (lindane) - GC/MS-method
- VDI 2463 Blatt 7-2014 Particulate matter measurement - Determination of suspended particulate matter and gaseous chemical compounds in ambient air and indoor air - Active sampling via low-volume sampler (LVS)
- VDI 2463 Blatt 8-2014 Particulate matter measurement - Determination of suspended particulate matter in ambient air and indoor air - Non-fractioning sampling system for low-volume samplers (LVS)
- VDI 2100 Blatt 6-2010 Determination of gaseous compounds in ambient air - Determination of indoor air pollutants - Gas chromatographic determination of organic compounds - Practical instructions for the determination of the measurement uncertainty
- VDI 4301 Blatt 5-2009 Measurement of indoor air pollution - Measurement of flame retardants and plasticizers based on organophosphorous compounds - Phosphoric acid ester
- VDI 3877 Blatt 1-2011 Indoor air pollution - Measurement of fibrous dust on settled on surfaces - Sampling and analysis (REM/EDXA)
- VDI 6022 Blatt 1.1-2012 Ventilation and indoor-air quality - Hygiene requirements for ventilation and air-conditioning systems and units - Checking of ventilation and air-conditioning systems (VDI Ventilation Code of Practice)
British Standards Institution (BSI), Batch testing of indoor air
- 12/30262107 DC BS ISO 16000-30. Indoor air. Part 30. Sensory testing of indoor air
- BS ISO 16000-34:2018 Indoor air. Strategies for the measurement of airborne particles
- BS ISO 16000-3:2011 Indoor air. Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air. Active sampling method
- BS ISO 16000-18:2011 Indoor air. Detection and enumeration of moulds. Sampling by impaction
- BS ISO 16000-16:2009 Indoor air. Detection and enumeration of moulds. Sampling by filtration
- BS ISO 16000-21:2014 Indoor air. Detection and enumeration of moulds. Sampling from materials
- BS ISO 16000-16:2008 Indoor air - Detection and enumeration of moulds - Sampling by filtration
- BS ISO 16000-21:2013 Indoor air. Detection and enumeration of moulds. Sampling from materials
- 22/30432789 DC BS ISO 16000-44. Indoor air - Part 44. Test method for measuring perceived indoor air quality for use in testing the performance of gas phase air cleaners
- BS ISO 12219-7:2017 Interior air of road vehicles. Odour determination in interior air of road vehicles and test chamber air of trim components by olfactory measurements
- BS ISO 16000-37:2019 Indoor air - Measurement of PM2$d,5 mass concentration
- BS ISO 16000-20:2014 Indoor air. Detection and enumeration of moulds. Determination of total spore count
- BS EN 16846-1:2017 Photocatalysis. Measurement of efficiency of photocatalytic devices used for the elimination of VOC and odour in indoor air in active mode. Batch mode test method in closed chamber
- DD IEC/PAS 62587:2008 Method for measuring performance of portable household electric room air cleaners
- BS ISO 16000-42:2023 Indoor air - Measurement of the particle number concentration by condensation particle counters
- 19/30350533 DC BS ISO 16000-28. Indoor air. Part 28. Determination of odour emissions from building products using test chambers
- BS EN 16516:2017+A1:2020 Construction products: Assessment of release of dangerous substances. Determination of emissions into indoor air
- BS ISO 16000-6:2012 Indoor air. Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA sorbent, thermal desorption and gas chromatography using MS or MS-FID
- BS EN 14412:2004 Indoor air quality - Diffusive samplers the determination of concentrations of gases and vapours - Guide for selection, use and maintenance
- BS EN 14412:2004(2009) Indoor air quality - Diffusive samplers the determination of concentrations of gases and vapours - Guide for selection, use and maintenance
- BS 8494:2007 Electronic portable and transportable apparatus designed to detect and measure carbon dioxide in indoor ambient air - Requirements and test methods
- 21/30396033 DC BS ISO 16000-42. Indoor air - Part 42. Measurement of the particle number concentration by Condensation Particle Counters
- BS EN 50543:2011 Electronic portable and transportable apparatus designed to detect and measure carbon dioxide and/or carbon monoxide in indoor ambient air. Requirements and test methods
Group Standards of the People's Republic of China, Batch testing of indoor air
- T/CASME 849-2023 Technical requirements for indoor air detection
- T/ZS 0314-2022 Operating rules for indoor air quality inspection of civil buildings
- T/GDBX 063-2022 On-line fast detection method of trace components in vehicle cabin air
- T/CCBD 9-2020 Brand evaluation —Testing organizations of indoor air quality and related product
- T/CECS 569-2019 Standard for measurement method of indoor air radon
- T/SAEPI 003-2019 Commercial Indoor Particles Concentration Detection System
- T/CSUS 02-2019 Indoor Air Quality Monitor for Civil Buildings
- T/GZZH 006-2023 Instructions for use of indoor air pollution on-site detection instruments
- T/CECS 615-2019 Building indoor air quality monitoring and evaluation standards
- T/CAQI 39-2017 Technical requires for online monitoring system of Indoor air quality
- T/GIEHA 024-2021 Technical specification for indoor air quality monitoring in public places
- T/CECS 539-2018 Standard for determination of benzene and its analogies and total volatile organic compounds in indoor air
Shandong Provincial Standard of the People's Republic of China, Batch testing of indoor air
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Batch testing of indoor air
- ASHRAE DE-93-19-1993 Methods for Monitoring Indoor Air Quality
- ASHRAE TO-98-12-5-1998 The Effects of Varying Indoor Air Temperature and Heat Gain on the Measurement of Retrofit Savings
- ASHRAE HI-02-19-2-2002 Development of a Particle Image Velocimetry for Measuring Air Velocity in Large-Scale Room Airflow Applications (RP-978)
- ASHRAE 3832-1994 Evaluation of Test Methods for Determining the Effectiveness and Capacity of Gas-Phase Air Filtration Equipment for Indoor Air Applications - Phase I: Literature Review and Test Recommendations
HU-MSZT, Batch testing of indoor air
International Organization for Standardization (ISO), Batch testing of indoor air
- ISO/DIS 16000-44 Indoor air — Part 44: Test method for measuring perceived indoor air quality for use in testing the performance of gas phase air cleaners
- ISO/FDIS 16000-44:2011 Indoor air — Part 44: Test method for measuring perceived indoor air quality for use in testing the performance of gas phase air cleaners
- ISO 16000-34:2018 Indoor air - Part 34: Strategies for the measurement of airborne particles
- ISO 16000-37:2019 Indoor air — Part 37: Measurement of PM2,5 mass concentration
- ISO 16000-3:2011 Indoor air - Part 3: Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air - Active sampling method
- ISO 16000-18:2011 Indoor air - Part 18: Detection and enumeration of moulds - Sampling by impaction
- ISO 12219-7:2017 Interior air of road vehicles - Part 7: Odour determination in interior air of road vehicles and test chamber air of trim components by olfactory measurements
- ISO 16000-16:2008 Indoor air - Part 16: Detection and enumeration of moulds - Sampling by filtration
- ISO 16000-21:2013 Indoor air.Part 21: Detection and enumeration of moulds.Sampling from materials
- ISO 16000-20:2014 Indoor air - Part 20: Detection and enumeration of moulds - Determination of total spore count
- ISO/DIS 16000-22:2023 Indoor air — Part 22: Detection and quantification of fungal biomass by fungal β-N-acetylhexosaminidase enzyme activity
- ISO/FDIS 16000-42 Indoor air — Part 42: Measurement of the particle number concentration by condensation particle counters
- ISO 16000-42:2023 Indoor air — Part 42: Measurement of the particle number concentration by condensation particle counters
- ISO 16000-6:2011 Indoor air - Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA sorbent, thermal desorption and gas chromatography using MS or MS-FID
- ISO 16000-6:2004 Indoor air - Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA sorbent, thermal desorption and gas chromatography using MS/FID
- ISO 16000-31:2014 Indoor air - Part 31: Measurement of flame retardants and plasticizers based on organophosphorus compounds - Phosphoric acid ester
- ISO 16000-27:2014 Indoor air - Part 27: Determination of settled fibrous dust on surfaces by SEM (scanning electron microscopy) (direct method)
German Institute for Standardization, Batch testing of indoor air
- DIN ISO 16000-34 Berichtigung 1:2019-05 Indoor air - Part 34: Strategies for the measurement of airborne particles (ISO 16000-34:2018); Corrigendum 1
- DIN ISO 16000-34:2019-01 Indoor air - Part 34: Strategies for the measurement of airborne particles (ISO 16000-34:2018)
- DIN ISO 16000-14:2012-03 Indoor air - Part 14: Determination of total (gas and particle-phase) polychlorinated dioxin-like biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDDs/PCDFs) - Extraction, clean-up and analysis by high-resolution gas chromatograp...
- DIN ISO 16000-44:2022-05 Indoor air - Part 44: Test method for measuring perceived indoor air quality for use in testing the performance of gas phase air cleaners (ISO/DIS 16000-44:2022); Text in German and English / Note: Date of issue 2022-03-25
- DIN ISO 16000-28:2021-11 Indoor air - Part 28: Determination of odour emissions from building products using test chambers (ISO 16000-28:2020)
- DIN ISO 16000-3:2013 Indoor air - Part 3: Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air - Active sampling method (ISO 16000-3:2011)
- DIN ISO 16000-18:2012-01 Indoor air - Part 18: Detection and enumeration of moulds - Sampling by impaction (ISO 16000-18:2011)
- DIN ISO 16000-37:2019-05 Indoor air - Part 37: Measurement of PM<(Index)2,5> mass concentration (ISO 16000-37:2019)
- DIN ISO 16000-34:2019 Indoor air - Part 34: Strategies for the measurement of airborne particles (ISO 16000-34:2018)
- DIN ISO 16000-21:2014-05 Indoor air - Part 21: Detection and enumeration of moulds - Sampling from materials (ISO 16000-21:2013)
- DIN ISO 16000-16:2009-12 Indoor air - Part 16: Detection and enumeration of moulds - Sampling by filtration (ISO 16000-16:2008)
- DIN ISO 16000-37:2019 Indoor air - Part 37: Measurement of PM mass concentration (ISO 16000-37:2019)
- DIN ISO 16000-37:2018 Indoor air - Part 37: Measurement of PM mass concentration (ISO/DIS 16000-37:2018); Text in German and English
- DIN ISO 16000-20:2015-11 Indoor air - Part 20: Detection and enumeration of moulds - Determination of total spore count (ISO 16000-20:2014)
- DIN 74060-10:1988-01 Air braking systems; air-pressure cylinder; brake chamber, method of measurement of the output-force over the stroke
- DIN ISO 16000-28:2019 Indoor air - Part 28: Determination of odour emissions from building products using test chambers (ISO/DIS 16000-28:2019); Text in German and English
- DIN EN 16846-1:2017-05 Photocatalysis - Measurement of efficiency of photocatalytic devices used for the elimination of VOC and odour in indoor air in active mode - Part 1: Batch mode test method in closed chamber; German version EN 16846-1:2017
- DIN ISO 16000-18:2012 Indoor air - Part 18: Detection and enumeration of moulds - Sampling by impaction (ISO 16000-18:2011)
- DIN ISO 16000-17:2010-06 Indoor air - Part 17: Detection and enumeration of moulds - Culture-based method (ISO 16000-17:2008)
- DIN EN 16516:2020-10 Construction products: Assessment of release of dangerous substances - Determination of emissions into indoor air; German version EN 16516:2017+A1:2020
- DIN ISO 12219-7:2017 Interior air of road vehicles - Part 7: Odour determination in interior air of road vehicles and test chamber air of trim components by olfactory measurements (ISO 12219-7:2017)
- DIN ISO 16000-42:2022-01 Indoor air - Part 42: Measurement of the particle number concentration by Condensation Particle Counters (ISO/DIS 16000-42:2021); Text in German and English / Note: Date of issue 2021-12-10
- DIN ISO 16000-20:2015 Indoor air - Part 20: Detection and enumeration of moulds - Determination of total spore count (ISO 16000-20:2014)
- DIN ISO 16000-21:2014 Indoor air - Part 21: Detection and enumeration of moulds - Sampling from materials (ISO 16000-21:2013)
- DIN ISO 16000-25:2012-01 Indoor air - Part 25: Determination of the emission of semi-volatile organic compounds by building products - Micro-chamber method (ISO 16000-25:2011)
- DIN EN 16846-1:2017 Photocatalysis - Measurement of efficiency of photocatalytic devices used for the elimination of VOC and odour in indoor air in active mode - Part 1: Batch mode test method in closed chamber; German version EN 16846-1:2017
- DIN EN 14412:2004-12 Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance; German version EN 14412:2004
- DIN ISO 16000-6:2012 Indoor air - Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TAę sorbent, thermal desorption and gas chromatography using MS or MS-FID (ISO 16000-6:2011)
- DIN ISO 16000-31:2014-09 Indoor air - Part 31: Measurement of flame retardants and plasticizers based on organophosphorus compounds - Phosphoric acid ester (ISO 16000-31:2014)
GOSTR, Batch testing of indoor air
Association Francaise de Normalisation, Batch testing of indoor air
- NF X43-404-34*NF ISO 16000-34:2019 Indoor air - Part 34 : strategies for the measurement of airborne particles
- NF X43-404-3*NF ISO 16000-3:2011 Indoor air - Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air - Part 3 : Active sampling method.
- NF ISO 16000-34:2019 Air intérieur - Partie 34 : stratégie pour la mesure des particules en suspension
- NF ISO 16000-6:2021 Air intérieur - Partie 6 : dosage des composés organiques (COTV, COV, COSV) dans l'air intérieur et l'air de chambre d'essai par prélèvement actif sur tubes à sorbant, désorption thermique et chromatographie en phase gazeuse avec détection M...
- NF ISO 16000-18:2011 Air intérieur - Partie 18 : détection et dénombrement des moisissures - Échantillonnage par impaction
- NF ISO 16000-17:2009 Air intérieur - Partie 17 : détection et dénombrement des moisissures - Méthode par culture
- NF ISO 16000-21:2014 Air intérieur - Partie 21 : détection et dénombrement des moisissures - Échantillonnage à partir de matériaux
- NF ISO 16000-16:2009 Air intérieur - Partie 16 : détection et dénombrement des moisissures - Échantillonage par filtration
- NF X43-404-21*NF ISO 16000-21:2014 Indoor air - Part 21 : detection and enumeration of moulds - Sampling from materials
- NF ISO 16000-20:2015 Air intérieur - Partie 20 : détection et dénombrement des moisissures - Détermination du nombre total de spores
- NF X43-404-20*NF ISO 16000-20:2015 Indoor air - Part 20 : detection and enumeration of moulds - Determination of total spore count
- NF ISO 12219-7:2018 Air intérieur des véhicules routiers - Partie 7 : détermination des odeurs dans l'air intérieur des véhicules routiers et dans les chambres d'essai d'air des composants de finition par des mesurages olfactifs
- NF X43-408-7*NF ISO 12219-7:2018 Interior air of road vehicles - Part 7 : odour determination in interior air of road vehicles and test chamber air of trim components by olfactory measurements
- NF X43-007:2008 Air quality - Ambient air - Determination of the mass of dry atmospheric depositions - Sampling on deposit plates - Preparation and treatment.
- NF X43-404-18*NF ISO 16000-18:2011 Indoor air - Part 18 : detection and enumeration of moulds - Sampling by impaction.
- NF X43-404-6:2012 Indoor air - Part 6 : determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA(R) sorbent, thermal desorption and gas chromatography using MS or MS/FID.
- NF EN 14412:2004 Qualité de l'air intérieur - Échantillonnage par diffusion pour la détermination de la concentration des gaz et des vapeurs - Guide pour la sélection, l'utilisation et la maintenance
- NF ISO 16000-25:2011 Air intérieur - Partie 25 : dosage de l'émission de composés organiques semi-volatils des produits de construction - Méthode de la micro-chambre
- NF ISO 16000-31:2014 Air intérieur - Partie 31 : mesurage des ignifugeants basés sur des composés organophosphorés - Ester d'acide phosphorique
- NF EN 50543:2011 Matériels électroniques portables et transportables de détection et de mesure du dioxyde de carbone et/ou du monoxyde de carbone dans l'air ambiant intérieur des locaux - Exigences et méthodes d'essai
- NF X43-404-31*NF ISO 16000-31:2014 Indoor air - Part 31 : measurement of flame retardants and plasticizers based on organophosphorus compounds - Phosphoric acid ester
- NF C23-543*NF EN 50543:2011 Electronic portable and transportable apparatus designed to detect and measure carbon dioxide and/or carbon monoxide in indoor ambient air - Requirements and test methods.
- NF X43-404-27*NF ISO 16000-27:2014 Indoor air - Part 27 : determination of settled fibrous dust on surfaces by SEM (scanning electron microscopy) (direct method)
Professional Standard - Environmental Protection, Batch testing of indoor air
- HJ/T 167-2004 Technical specifications for monitoring of indoor air quality
Beijing Provincial Standard of the People's Republic of China, Batch testing of indoor air
- DB11/T 745-2010 Method for measuring air temperature in residential heating room
- DB11/T 745-2019 Measurement method of indoor air temperature in heated dwelling
Inner Mongolia Provincial Standard of the People's Republic of China, Batch testing of indoor air
- DB15/T 501-2011 Method for measuring air temperature in residential heating room
Korean Agency for Technology and Standards (KATS), Batch testing of indoor air
- KS I ISO 16000-3:2008 Indoor air-Part 3:Determination of formaldehyde and other carbonyl compounds-Active sampling method
- KS I ISO 16000-3:2014 Indoor air — Part 3: Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air — N sampling method
- KS I ISO 16000-17:2012 Indoor air－Part 17：Detection and enumeration of moulds－Culture-based method
- KS F 2866-2003(2018) Laboratory measurement of room-to-room airborne sound insulation of a suspended ceiling with a plenum above it
- KS I ISO 16000-16:2012 Indoor air－Part 16：Detection and enumeration of moulds－Sampling by filtration
- KS I ISO 16000-18:2013 Indoor air ― Part 18: Detection and enumeration of moulds ― Sampling by impaction
- KS I ISO 16000-17-2012(2017) Indoor air－Part 17：Detection and enumeration of moulds－Culture-based method
- KS I ISO 16000-16-2012(2022) Indoor air－Part 16：Detection and enumeration of moulds－Sampling by filtration
- KS I ISO 16000-17-2012(2022) Indoor air－Part 17：Detection and enumeration of moulds－Culture-based method
- KS I ISO 16000-16-2012(2017) Indoor air－Part 16：Detection and enumeration of moulds－Sampling by filtration
- KS I ISO 16000-21-2014(2019) Indoor air — Part 21: Detection and enumeration of moulds — Sampling from materials
- KS I ISO 16000-18-2013(2018) Indoor air ― Part 18: Detection and enumeration of moulds ― Sampling by impaction
- KS I ISO 16000-21:2014 Indoor air — Part 21: Detection and enumeration of moulds — Sampling from materials
- KS I ISO 16000-6:2004 Indoor air-Part 6:Determination of volatile organic compounds inindoor and test chamber air by active sampling on Tenax TA sorbent,thermal desorption and gas chromatography using MS/FID
- KS I ISO 16000-6:2014 Indoor air — Part 6: Determination of volatile organic compounds in indoor and test chamber air by N sampling on Tenax TA® sorbent, thermal desorption and gas chromatography using MS or MS/FID
- KS I ISO 16000-25-2013(2018) Indoor air ― Part 25: Determination of the emission of semi-volatile organic compounds by building products ― Micro-chamber method
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Batch testing of indoor air
- GB/T 28370-2012 Detect methods for the air quality inside long distance coach
- GB/T 17729-2023 Hygienic standard and detect methods for the air quality inside interurban bus
Professional Standard - Construction Industry, Batch testing of indoor air
- JG/T 498-2016 Simple sampling instrument detection method for indoor air pollution in buildings
Danish Standards Foundation, Batch testing of indoor air
- DS/ISO 16000-16:2009 Indoor air - Part 16: Detection and enumeration of moulds - Sampling by filtration
- DS/ISO 16000-18/Cor. 1:2012 Indoor air - Part 18: Detection and enumeration of moulds - Sampling by impaction
- DS/ISO 16000-18:2011 Indoor air - Part 18: Detection and enumeration of moulds - Sampling by impaction
- DS/ISO 16000-17/Corr. 1:2009 Indoor air - Part 17: Detection and enumeration of moulds - Culture-based method
- DS/ISO 16000-17:2009 Indoor air - Part 17: Detection and enumeration of moulds - Culture-based method
- DS/ISO 16000-28:2020 Indoor air – Part 28: Determination of odour emissions from building products using test chambers
- DS/EN 17416:2021 Glass in building – Assessment of release of dangerous substances – Determination of emissions into indoor air from glass products
- DS/EN 14412:2004 Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance
- DS/EN 50543:2011 Electronic portable and transportable apparatus designed to detect and measure carbon dioxide and/or carbon monoxide in indoor ambient air - Requirements and test methods
Anhui Provincial Standard of the People's Republic of China, Batch testing of indoor air
- DB34/T 392-2004 Test method for laser determination of inhalable particulate matter in indoor air
Military Standard of the People's Republic of China-General Armament Department, Batch testing of indoor air
- GJB 533.7-1988 Detection method for 45 components of submarine cabin air. Determination of chlorine content. Calibration tube method
- GJB 533.10-1988 Detection method for 45 components of submarine cabin air. Determination of ammonia content. Calibration tube method
- GJB 533.11-1988 Detection method for 45 components of submarine cabin air - Determination of ethanolamine vapor content Calibration tube method
- GJB 533.15-1988 Detection method for 45 components of submarine cabin air - Determination of mercury vapor content Ring furnace method
- GJB 533.8-1988 Detection method for 45 components of submarine cabin air - Determination of arsine content Calibration tube method
- GJB 533.9-1988 Detection method for 45 components of submarine cabin air - Determination of hydrogen antimonide content Calibration tube method
- GJB 533.3-1988 Detection method for 45 components of submarine cabin air - Determination of hydrogen sulfide content Calibration tube method
- GJB 533.30-1988 Detection method for 45 components of submarine cabin air. Measurement of indole and skatole content by gas chromatography
- GJB 533.23-1988 Detection method for 45 components of submarine cabin air. Determination of total hydrocarbon content by gas chromatography.
- GJB 533.6-1988 Detection method for 45 components of submarine cabin air. Calibration tube method for determination of carbon dioxide content.
- GJB 533.5-1988 Detection method for 45 components of submarine cabin air. Determination of nitrogen oxide content. Calibration tube method
- GJB 533.4-1988 Detection method for 45 components of submarine cabin air. Determination of sulfur dioxide content. Calibration tube method
- GJB 533.2-1988 Detection method for 45 components of submarine cabin air - Determination of carbon monoxide content Calibration tube method
- GJB 533.24-1988 Detection method for 45 components of submarine cabin air. Determination of Freon-12 content by gas chromatography.
- GJB 533.27-1988 Methods for detection of 45 components of submarine cabin air. Determination of acetone and butanone content by gas chromatography.
- GJB 533.13-1988 Detection method for 45 components of submarine cabin air - Determination of hydrogen chloride content Ring furnace method
- GJB 533.14-1988 Detection method for 45 components of submarine cabin air. Determination of sulfuric acid mist content. Ring furnace method.
- GJB 533.22-1988 Detection method for 45 components of submarine cabin air. Determination of hydrogen, oxygen, nitrogen and methane content by gas chromatography.
- GJB 533.25-1988 Detection method for 45 components of submarine cabin air. Determination of n-propanol and n-butanol content by gas chromatography.
- GJB 533.16-1988 Detection method for 45 components of submarine cabin air Colorimetric method for determination of alkaline aerosol (sodium hydroxide) content
- GJB 533.20-1988 Methods for detection of 45 components of submarine cabin air. Determination of hydrazine content. Phosphomolybdic acid absorbance method.
- GJB 533.12-1988 Detection methods for 45 components of submarine cabin air. Determination of hydrogen fluoride content. Ion-selective electrode method.
- GJB 533.18-1988 Detection methods for 45 components of submarine cabin air Determination of acrolein content Tryptophan absorbance method
- GJB 533.17-1988 Detection methods for 45 components of submarine cabin air. Determination of formaldehyde content. Acetylacetone absorbance method.
- GJB 533.26-1988 Detection methods for 45 components of submarine cabin air. Determination of methanol, ethanol, acetaldehyde, and methylene chloride content by gas chromatography.
- GJB 533.21-1988 Detection methods for 45 components of submarine cabin air Determination of ozone content Ferrous ammonium sulfate absorbance method
- GJB 533.29-1988 Detection method for 45 components of submarine cabin air. Determination of Freon-11, chloroform, and carbon tetrachloride content by gas chromatography.
- GJB 533.34-1991 Methods for detection of air components in submarine cabins - Determination of calcium, magnesium and zinc contents - Flame atomic absorption spectrophotometry
- GJB 533.28-1988 Detection methods for 45 components of submarine cabin air. Determination of benzene, toluene, ethylbenzene, xylene, and 1,2-dichloroethane content by gas chromatography.
- GJB 533.19-1988 Methods for detection of 45 components of submarine cabin air. Determination of sodium sarcosinate and dimethylamine content. Copper reagent absorbance method.
- GJB 533.35-1991 Methods for detecting air components in submarine cabins. Determination of cadmium, copper and lead content. Graphite furnace atomic absorption spectrophotometry.
Jiangsu Provincial Standard of the People's Republic of China, Batch testing of indoor air
- DB32/T 4176-2021 Technical specification for public building indoor air quality monitoring system
KR-KS, Batch testing of indoor air
- KS F 2866-2003(2023) Laboratory measurement of room-to-room airborne sound insulation of a suspended ceiling with a plenum above it
FI-SFS, Batch testing of indoor air
NL-NEN, Batch testing of indoor air
- NEN 2795-1985 Air quality - Ambient air and indoor air Determination of the concentration of methanal (formaldehyde) - Pararosanilin photometric method
American National Standards Institute （ANSI), Batch testing of indoor air
- ANSI/AHAM AC-1-2006 Method for Measuring Performance of Portable Household Electric Room Air Cleaners
ES-UNE, Batch testing of indoor air
- UNE-EN 16846-1:2019 Photocatalysis - Measurement of efficiency of photocatalytic devices used for the elimination of VOC and odour in indoor air in active mode - Part 1: Batch mode test method with a closed chamber
- UNE-EN 16516:2018+A1:2021 Construction products: Assessment of release of dangerous substances - Determination of emissions of into indoor air
- UNE-EN ISO 16000-9:2006/AC:2008 Indoor air - Part 9: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test chamber method (ISO 16000-9:2006/Cor 1:2007)
CZ-CSN, Batch testing of indoor air
- CSN 73 0513-1983 Measurement of aound insulation in buildings and of building elements. Laboratory measurements of airborne sound insulation
未注明发布机构, Batch testing of indoor air
- BS ISO 16000-17:2008(2010) Indoor air Part 17 : Detection and enumeration of moulds — Culture - based method
- DIN EN 16516:2018 Construction products – assessment of the release of hazardous substances – determination of emissions into indoor air
- BS EN 50543:2011(2014) Electronic portable and transportable apparatus designed to detect and measure carbon dioxide and / or carbon monoxide in indoor ambient air — Requirements and test methods
European Committee for Standardization (CEN), Batch testing of indoor air
- EN 16846-1:2017 Photocatalysis - Measurement of efficiency of photocatalytic devices used for the elimination of VOC and odour in indoor air in active mode - Part 1: Batch mode test method in closed chamber
- EN 14412:2004 Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance
IEC - International Electrotechnical Commission, Batch testing of indoor air
- PAS 62587-2008 Method for measuring performance of portable household electric room air cleaners (Edition 1.0)
Standard Association of Australia （SAA）, Batch testing of indoor air
- AS 2365.7:2006 Methods for sampling and analysis of indoor air - Determination of total suspended particulate matter - Gravimetric method
- AS 1012.4.2:2014 Methods of testing concrete, Method 4.2: Determination of air content of freshly mixed concrete — Measuring reduction in air pressure in chamber above concrete
American Society for Testing and Materials (ASTM), Batch testing of indoor air
- ASTM D6306-98(2003) Standard Guide for Placement and Use of Diffusion Controlled Passive Monitors for Gaseous Pollutants in Indoor Air
- ASTM D6306-98 Standard Guide for Placement and Use of Diffusion Controlled Passive Monitors for Gaseous Pollutants in Indoor Air
- ASTM D5156-95 Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption)
- ASTM D5156-02(2008) Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption)
- ASTM D5156-02 Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption)
CEN - European Committee for Standardization, Batch testing of indoor air
- EN 16516:2017/PRA1:2019 Construction products: Assessment of release of dangerous substances - Determination of emissions of into indoor air
PL-PKN, Batch testing of indoor air
- PN-EN 16516+A1-2020-12 E Construction products: Assessment of release of dangerous substances -- Determination of emissions into indoor air
- PN-EN 17416-2021-08 E Glass in building -- Assessment of release of dangerous substances -- Determination of emissions into indoor air from glass products
Lithuanian Standards Office , Batch testing of indoor air
- LST EN 14412-2004 Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance
- LST EN 50543-2011 Electronic portable and transportable apparatus designed to detect and measure carbon dioxide and/or carbon monoxide in indoor ambient air - Requirements and test methods
- LST EN 50543-2011/AC-2011 Electronic portable and transportable apparatus designed to detect and measure carbon dioxide and/or carbon monoxide in indoor ambient air - Requirements and test methods
European Committee for Electrotechnical Standardization（CENELEC）, Batch testing of indoor air
- EN 50543:2011 Electronic portable and transportable apparatus designed to detect and measure carbon dioxide and/or carbon monoxide in indoor ambient air - Requirements and test methods
- EN 50543:2011/AC:2011 Electronic portable and transportable apparatus designed to detect and measure carbon dioxide and/or carbon monoxide in indoor ambient air - Requirements and test methods
Japanese Industrial Standards Committee (JISC), Batch testing of indoor air
- JIS A 1906:2008 Performance test of sorptive building materials of reducing indoor air pollution with small chamber -- Measurement of adsorption flux with supplying constant concentration of contaminant air of VOC and aldehydes without formaldehyde
- JIS A 1906:2015 Performance test of sorptive building materials of reducing indoor air pollution with small chamber -- Measurement of adsorption flux with supplying constant concentration of contaminant air of VOC and aldehydes without formaldehyde