ZH
RU
ES
Indoor Air Testing Standards
Indoor Air Testing Standards, Total:220 items.
In the international standard classification, Indoor Air Testing Standards involves: Environmental testing, Air quality, Construction industry, Civil engineering in general, Miscellaneous domestic and commercial equipment, Environmental protection, Test conditions and procedures in general, Microbiology, Services, Manufacturing forming processes, Mathematics, Tobacco, tobacco products and related equipment, Protection of and in buildings, Installations in buildings, Floor treatment appliances, Ventilators. Fans. Air-conditioners, Passenger and cabin equipment, Products of the chemical industry, Vacuum technology, Insulation, Corrosion of metals, Aircraft and space vehicles in general, Acoustics and acoustic measurements, Fuels, Metrology and measurement in general, Road vehicles in general.
Group Standards of the People's Republic of China, Indoor Air Testing Standards
- T/CECS 569-2019 Standard for measurement method of indoor air radon
- T/CASME 849-2023 Technical requirements for indoor air detection
- T/SICCA 005-2018 Hotel air quality standard
- T/CECS 615-2019 Building indoor air quality monitoring and evaluation standards
- T/JSIIEPPC 0001-2020 Standard for indoor air quality health assessment
- T/CECS 698-2020 Indoor PM2.5 detection equipment performance inspection standard
- T/CECS 539-2018 Standard for determination of benzene and its analogies and total volatile organic compounds in indoor air
- T/SAEPI 003-2019 Commercial Indoor Particles Concentration Detection System
- T/CECS 1357-2023 Standard for evaluation methods of indoor air odor in civil buildings
- T/XJX 004-2021 Standards for Indoor Air Quality Evaluation in Public Places
- T/CSUS 35-2021 Indoor air quality assurance system evaluation standard
- T/ZS 0314-2022 Operating rules for indoor air quality inspection of civil buildings
- T/GZZH 006-2023 Instructions for use of indoor air pollution on-site detection instruments
- T/GDBX 063-2022 On-line fast detection method of trace components in vehicle cabin air
- T/CCBD 9-2020 Brand evaluation —Testing organizations of indoor air quality and related product
- T/GDES 67-2022 Indoor air quality standard for die casting workshop of green factory
- T/ZJJXH 0001-2020 Indoor air environmental quality grading standards for primary and secondary schools
- T/APEP 1003-2017 Indoor ambient air purification treatment service evaluation standard
- T/YCST 002-2023 Technical standard for on-site detection of indoor acoustic environment in civil buildings
RU-GOST R, Indoor Air Testing Standards
- GOST ISO 16000-30-2017 Indoor air. Part 30. Sensory testing of indoor air
- GOST ISO 16000-29-2017 Indoor air. Part 29. Test methods for VOC detectors
- GOST ISO 16000-21-2016 Indoor air. Part 21. Detection and enumeration of moulds. Sampling from materials
- GOST R ISO 16000-16-2012 Indoor air. Part 16. Detection and enumeration of moulds. Sampling by filtration
- GOST R ISO 16000-18-2013 Indoor air. Part 18. Detection and enumeration of moulds. Sampling by impaction
- GOST ISO 16000-20-2017 Indoor air. Part 20. Detection and enumeration of moulds. Determination of total spore count
- GOST R ISO 16000-17-2012 Indoor air. Part 17. Detection and enumeration of moulds. Culture-based method
- GOST R ISO 16000-36-2021 Indoor air. Part 36. Standard method for assessing the reduction rate of culturable airborne bacteria by air purifiers using a test chamber
- GOST R 51206-2004 Motor vehicles. Content of pollutants in the air of passenger compartment and cabin. Norms and test methods
- GOST R 51206-1998 Automobile vehicles. Content of harmful substances in air of cabin and saloon. Rates and methods of determination
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Indoor Air Testing Standards
British Standards Institution (BSI), Indoor Air Testing Standards
- 12/30262107 DC BS ISO 16000-30. Indoor air. Part 30. Sensory testing of indoor air
- BS ISO 16000-18:2011 Indoor air. Detection and enumeration of moulds. Sampling by impaction
- BS ISO 16000-16:2009 Indoor air. Detection and enumeration of moulds. Sampling by filtration
- BS ISO 16000-21:2014 Indoor air. Detection and enumeration of moulds. Sampling from materials
- BS ISO 16000-16:2008 Indoor air - Detection and enumeration of moulds - Sampling by filtration
- BS ISO 16000-21:2013 Indoor air. Detection and enumeration of moulds. Sampling from materials
- BS ISO 16000-36:2018 Indoor air - Standard method for assessing the reduction rate of culturable airborne bacteria by air purifiers using a test chamber
- BS ISO 16000-20:2014 Indoor air. Detection and enumeration of moulds. Determination of total spore count
- ASTM D5075-01(R2022) Standard Test Method for Nicotine and 3-Ethenylpyridine in Indoor Air
- BS EN 4618:2009 Aerospace series. Aircraft internal air quality standards, criteria and determination methods
中华人民共和国国家卫生和计划生育委员会, Indoor Air Testing Standards
TR-TSE, Indoor Air Testing Standards
- TS 2386-1976 SAFETY REQUIREMENTS FOR THE ELECTRICAL EQUIPMENT OF ROOM AIR CONDITIONERS
Professional Standard - Agriculture, Indoor Air Testing Standards
Indonesia Standards, Indoor Air Testing Standards
American Society for Testing and Materials (ASTM), Indoor Air Testing Standards
- ASTM E3273-21 Standard Practice to Assess Microbial Decontamination of Indoor Air using an Aerobiology Chamber
- ASTM D6306-98(2003) Standard Guide for Placement and Use of Diffusion Controlled Passive Monitors for Gaseous Pollutants in Indoor Air
- ASTM D6306-98 Standard Guide for Placement and Use of Diffusion Controlled Passive Monitors for Gaseous Pollutants in Indoor Air
- ASTM D6245-07 Standard Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation
- ASTM D7297-06 Standard Practice for Evaluating Residential Indoor Air Quality Concerns
- ASTM D5157-97 Standard Guide for Statistical Evaluation of Indoor Air Quality Models
- ASTM D5157-97(2003)e1 Standard Guide for Statistical Evaluation of Indoor Air Quality Models
- ASTM D5157-97(2008) Standard Guide for Statistical Evaluation of Indoor Air Quality Models
- ASTM D5157-19 Standard Guide for Statistical Evaluation of Indoor Air Quality Models
- ASTM D5157-97(2014) Standard Guide for Statistical Evaluation of Indoor Air Quality Models
- ASTM D6245-98 Standard Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation
- ASTM D6245-98(2002) Standard Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation
- ASTM D6245-12 Standard Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation
- ASTM D6245-18 Standard Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation
- ASTM F2608-15e1 Standard Test Method for Determining the Change in Room Air Particulate Counts as a Result of the Vacuum Cleaning Process
- ASTM F2608-15(2022) Standard Test Method for Determining the Change in Room Air Particulate Counts as a Result of the Vacuum Cleaning Process
- ASTM D7297-14 Standard Practice for Evaluating Residential Indoor Air Quality Concerns
- ASTM D7297-21 Standard Practice for Evaluating Residential Indoor Air Quality Concerns
- ASTM E2320-04 Standard Classification for Serviceability of an Office Facility for Thermal Environment and Indoor Air Conditions
- ASTM E2320-04(2012) Standard Classification for Serviceability of an Office Facility for Thermal Environment and Indoor Air Conditions
- ASTM F431-04(2013) Standard Specification for Air Performance Measurement Plenum Chamber for Vacuum Cleaners
- ASTM F431-03 Standard Specification for Air Performance Measurement Plenum Chamber for Vacuum Cleaners
- ASTM F431-04 Standard Specification for Air Performance Measurement Plenum Chamber for Vacuum Cleaners
- ASTM F431-04(2008) Standard Specification for Air Performance Measurement Plenum Chamber for Vacuum Cleaners
- ASTM D5075-01(2007) Standard Test Method for Nicotine and 3-Ethenylpyridine in Indoor Air
- ASTM D5075-96e1 Standard Test Method for Nicotine and 3-Ethenylpyridine in Indoor Air
- ASTM D5075-01(2012)e1 Standard Test Method for Nicotine and 3-Ethenylpyridine in Indoor Air
- ASTM F2608-07 Standard Test Method for Determining the Change in Room Air Particulate Counts as a Result of the Vacuum Cleaning Process
- ASTM F2608-07(2014) Standard Test Method for Determining the Change in Room Air Particulate Counts as a Result of the Vacuum Cleaning Process
- ASTM F2608-15 Standard Test Method for Determining the Change in Room Air Particulate Counts as a Result of the Vacuum Cleaning Process
- ASTM D6306-17 Standard Guide for Placement and Use of Diffusive Samplers for Gaseous Pollutants in Indoor Air
- ASTM D5075-01 Standard Test Method for Nicotine and 3-Ethenylpyridine in Indoor Air
- ASTM E2320-04(2018) Standard Classification for Serviceability of an Office Facility for Thermal Environment and Indoor Air Conditions
- ASTM E2320-19 Standard Classification for Serviceability of an Office Facility for Thermal Environment and Indoor Air Conditions
- ASTM D5075-01(2022) Standard Test Method for Nicotine and 3-Ethenylpyridine in Indoor Air
- ASTM D5075-01(2017)e1 Standard Test Method for Nicotine and 3-Ethenylpyridine in Indoor Air
- ASTM D7036-04 Standard Practice for Competence of Air Emission Testing Bodies
- ASTM D5156-95 Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption)
- ASTM D5156-02(2008) Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption)
- ASTM D5791-95 Standard Guide for Using Probability Sampling Methods in Studies of Indoor Air Quality in Buildings
- ASTM D5791-95(2001) Standard Guide for Using Probability Sampling Methods in Studies of Indoor Air Quality in Buildings
- ASTM D5791-95(2006) Standard Guide for Using Probability Sampling Methods in Studies of Indoor Air Quality in Buildings
- ASTM D5791-95(2012)e1 Standard Guide for Using Probability Sampling Methods in Studies of Indoor Air Quality in Buildings
- ASTM D5791-95(2017) Standard Guide for Using Probability Sampling Methods in Studies of Indoor Air Quality in Buildings
- ASTM E1593-06 Standard Guide for Assessing the Efficacy of Air Care Products in Reducing Sensorly Perceived Indoor Air Malodor Intensity
- ASTM E1593-13 Standard Guide for Assessing the Efficacy of Air Care Products in Reducing the Perception of Indoor Malodor
- ASTM D6306-10 Standard Guide for Placement and Use of Diffusion Controlled Passive Monitors for Gaseous Pollutants in Indoor Air
- ASTM D5791-23 Standard Guide for Using Probability Sampling Methods in Studies of Indoor Air Quality in Buildings
- ASTM E336-10 Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings
- ASTM E741-00 Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution
- ASTM E834-81(1998) Standard Practice for Determining Vacuum Chamber Gaseous Environment Using a Cold Finger
- ASTM E834-04 Standard Practice for Determining Vacuum Chamber Gaseous Environment Using a Cold Finger
- ASTM E834-09(2015) Standard Practice for Determining Vacuum Chamber Gaseous Environment Using a Cold Finger
- ASTM E834-09 Standard Practice for Determining Vacuum Chamber Gaseous Environment Using a Cold Finger
- ASTM D5156-02 Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption)
- ASTM E741-11 Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution
- ASTM E1593-94(1999) Standard Practice for Assessing the Efficacy of Air Freshener Products in Reducing Sensorily Perceived Indoor Air Malodor Intensity
- ASTM B808-97 Standard Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances
- ASTM B808-97(2003) Standard Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances
- ASTM B808-10(2015) Standard Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances
- ASTM E741-00(2006)e1 Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution
- ASTM E2864-18(2022) Standard Test Method for Measurement of Airborne Metal Oxide Nanoparticle Surface Area Concentration in Inhalation Exposure Chambers using Krypton Gas Adsorption
- ASTM E1186-17 Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems
- ASTM E2267-04 Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings-Indoor Air Quality
- ASTM E2267-03 Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings-Indoor Air Quality
- ASTM E2267-04(2013) Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellingsmdash;Indoor Air Quality
- ASTM D6281-06 Standard Test Method for Airborne Asbestos Concentration in Ambient and Indoor Atmospheres as Determined by Transmission Electron Microscopy Direct Transfer (TEM)
- ASTM D6281-04 Standard Test Method for Airborne Asbestos Concentration in Ambient and Indoor Atmospheres as Determined by Transmission Electron Microscopy Direct Transfer (TEM)
- ASTM D6281-09 Standard Test Method for Airborne Asbestos Concentration in Ambient and Indoor Atmospheres as Determined by Transmission Electron Microscopy Direct Transfer (TEM)
- ASTM D6281-15 Standard Test Method for Airborne Asbestos Concentration in Ambient and Indoor Atmospheres as Determined by Transmission Electron Microscopy Direct Transfer (TEM)
- ASTM D6327-98 Standard Test Method for Determination of Radon Decay Product Concentration and Working Level in Indoor Atmospheres by Active Sampling on a Filter
- ASTM D6327-98(2004) Standard Test Method for Determination of Radon Decay Product Concentration and Working Level in Indoor Atmospheres by Active Sampling on a Filter
- ASTM D6327-10 Standard Test Method for Determination of Radon Decay Product Concentration and Working Level in Indoor Atmospheres by Active Sampling on a Filter
- ASTM E1186-22 Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems
- ASTM D8405-21 Standard Test Method for Evaluating PM2.5 Sensors or Sensor Systems Used in Indoor Air Applications
- ASTM E90-02 Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements
- ASTM E90-09(2016) Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements
- ASTM D6327-10(2021) Standard Test Method for Determination of Radon Decay Product Concentration and Working Level in Indoor Atmospheres by Active Sampling on a Filter
- ASTM D6281-98 Standard Test Method for Airborne Asbestos Concentration in Ambient and Indoor Atmospheres as Determined by Transmission Electron Microscopy Direct Transfer (TEM)
- ASTM D5188-16 Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber and Piston Based Method)
- ASTM D6327-10(2016) Standard Test Method for Determination of Radon Decay Product Concentration and Working Level in Indoor Atmospheres by Active Sampling on a Filter
- ASTM D7782-13 Standard Practice for Determination of the 99 %/95 % Critical Level (WCL) and a Reliable Detection Estimate (WDE) Based on Within-laboratory Data
- ASTM D7783-13 Standard Practice for Determination of the 99 %/95 % Critical Level (WCL) and a Reliable Detection Estimate (WDE) Based on Within-laboratory Data
- ASTM E1186-03 Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems
- ASTM E1186-03(2009) Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems
- ASTM D6007-02 Standard Test Method for Determining Formaldehyde Concentration in Air from Wood Products Using a Small Scale Chamber
- ASTM D6007-96 Standard Test Method for Determining Formaldehyde Concentration in Air from Wood Products Using a Small Scale Chamber
- ASTM D6007-22 Standard Test Method for Determining Formaldehyde Concentrations in Air from Wood Products Using a Small-Scale Chamber
- ASTM D6007-14 Standard Test Method for Determining Formaldehyde Concentrations in Air from Wood Products Using a Small-Scale Chamber
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Indoor Air Testing Standards
German Institute for Standardization, Indoor Air Testing Standards
- DIN ISO 16000-36:2019-07 Indoor air - Part 36: Standard method for assessing the reduction rate of culturable airborne bacteria by air purifiers using a test chamber (ISO 16000-36:2018, Corrected version 2019-03-01)
- DIN ISO 16000-18:2012-01 Indoor air - Part 18: Detection and enumeration of moulds - Sampling by impaction (ISO 16000-18:2011)
- DIN ISO 16000-21:2014-05 Indoor air - Part 21: Detection and enumeration of moulds - Sampling from materials (ISO 16000-21:2013)
- DIN ISO 16000-16:2009-12 Indoor air - Part 16: Detection and enumeration of moulds - Sampling by filtration (ISO 16000-16:2008)
- DIN ISO 16000-20:2015-11 Indoor air - Part 20: Detection and enumeration of moulds - Determination of total spore count (ISO 16000-20:2014)
- DIN ISO 16000-18:2012 Indoor air - Part 18: Detection and enumeration of moulds - Sampling by impaction (ISO 16000-18:2011)
- DIN ISO 16000-17:2010-06 Indoor air - Part 17: Detection and enumeration of moulds - Culture-based method (ISO 16000-17:2008)
- DIN ISO 16000-20:2015 Indoor air - Part 20: Detection and enumeration of moulds - Determination of total spore count (ISO 16000-20:2014)
- DIN ISO 16000-21:2014 Indoor air - Part 21: Detection and enumeration of moulds - Sampling from materials (ISO 16000-21:2013)
- DIN ISO 16000-36:2019 Indoor air - Part 36: Standard method for assessing the reduction rate of culturable airborne bacteria by air purifiers using a test chamber (ISO 16000-36:2018, Corrected version 2019-03-01)
未注明发布机构, Indoor Air Testing Standards
- BS ISO 16000-36:2018(2019) Indoor air Part 36 : Standard method for assessing the reduction rate of culturable airborne bacteria by air purifiers using a test chamber
- BS ISO 16000-17:2008(2010) Indoor air Part 17 : Detection and enumeration of moulds — Culture - based method
Korean Agency for Technology and Standards (KATS), Indoor Air Testing Standards
Association Francaise de Normalisation, Indoor Air Testing Standards
- NF X43-404-36*NF ISO 16000-36:2018 Indoor air - Part 36 : standard method for assessing the reduction rate of culturable airborne bacteria by air purifiers using a test chamber
- NF ISO 16000-36:2018 Air intérieur - Partie 36 : méthode normalisée d'évaluation du taux d'abattement de bactéries cultivables aéroportées par des purificateurs d'air en utilisant une chambre d'essai
- NF ISO 16000-6:2021 Air intérieur - Partie 6 : dosage des composés organiques (COTV, COV, COSV) dans l'air intérieur et l'air de chambre d'essai par prélèvement actif sur tubes à sorbant, désorption thermique et chromatographie en phase gazeuse avec détection M...
- NF ISO 16000-18:2011 Air intérieur - Partie 18 : détection et dénombrement des moisissures - Échantillonnage par impaction
- NF ISO 16000-17:2009 Air intérieur - Partie 17 : détection et dénombrement des moisissures - Méthode par culture
- NF ISO 16000-21:2014 Air intérieur - Partie 21 : détection et dénombrement des moisissures - Échantillonnage à partir de matériaux
- NF ISO 16000-16:2009 Air intérieur - Partie 16 : détection et dénombrement des moisissures - Échantillonage par filtration
- NF X43-404-21*NF ISO 16000-21:2014 Indoor air - Part 21 : detection and enumeration of moulds - Sampling from materials
- NF ISO 16000-20:2015 Air intérieur - Partie 20 : détection et dénombrement des moisissures - Détermination du nombre total de spores
- NF X43-404-20*NF ISO 16000-20:2015 Indoor air - Part 20 : detection and enumeration of moulds - Determination of total spore count
- NF L67-001:2010 Aerospace series - Aircraft internal air quality standards, criteria and determination methods.
- NF X43-404-18*NF ISO 16000-18:2011 Indoor air - Part 18 : detection and enumeration of moulds - Sampling by impaction.
- NF X43-404-27*NF ISO 16000-27:2014 Indoor air - Part 27 : determination of settled fibrous dust on surfaces by SEM (scanning electron microscopy) (direct method)
Professional Standard - Urban Construction, Indoor Air Testing Standards
- JGJ/T 461-2019 Design standard for indoor air quality control of public buildings
Professional Standard - Construction Industry, Indoor Air Testing Standards
- JG/T 498-2016 Simple sampling instrument detection method for indoor air pollution in buildings
International Organization for Standardization (ISO), Indoor Air Testing Standards
- ISO 16000-18:2011 Indoor air - Part 18: Detection and enumeration of moulds - Sampling by impaction
- ISO 16000-16:2008 Indoor air - Part 16: Detection and enumeration of moulds - Sampling by filtration
- ISO/DIS 16000-43:2023 Indoor air — Part 43: Standard method for assessing the reduction rate of culturable airborne fungi by air purifiers using a test chamber
- ISO 16000-21:2013 Indoor air.Part 21: Detection and enumeration of moulds.Sampling from materials
- ISO 16000-36:2018 Indoor air - Part 36: Standard method for assessing the reduction rate of culturable airborne bacteria by air purifiers using a test chamber
- ISO 16000-20:2014 Indoor air - Part 20: Detection and enumeration of moulds - Determination of total spore count
- ISO/CD 16000-43 Indoor air — Part 43: Standard method for assessing the reduction rate of culturable airborne fungi by air purifiers using a test chamber
- ISO/DIS 16000-22:2023 Indoor air — Part 22: Detection and quantification of fungal biomass by fungal β-N-acetylhexosaminidase enzyme activity
- ISO 16000-27:2014 Indoor air - Part 27: Determination of settled fibrous dust on surfaces by SEM (scanning electron microscopy) (direct method)
Danish Standards Foundation, Indoor Air Testing Standards
Anhui Provincial Standard of the People's Republic of China, Indoor Air Testing Standards
- DB34/T 392-2004 Test method for laser determination of inhalable particulate matter in indoor air
HU-MSZT, Indoor Air Testing Standards
Beijing Provincial Standard of the People's Republic of China, Indoor Air Testing Standards
- DB11/T 1005-2013 Standards for energy-saving monitoring of air-conditioning and heating indoor temperature in public buildings
Japanese Industrial Standards Committee (JISC), Indoor Air Testing Standards
- JIS C 9921-3:2009 Standard use conditions for room air conditioners to predetermine design standard use period
American National Standards Institute （ANSI), Indoor Air Testing Standards
- ANSI/ASTM F431:2021 Standard Specification for Air Performance Measurement Plenum Chamber for Vacuum Cleaners
- ASTM D6281-23 Standard Test Method for Airborne Asbestos Concentration in Ambient and Indoor Atmospheres as Determined by Transmission Electron Microscopy Direct Transfer (TEM) (Standard + Redline PDF Bundle)
Association of German Mechanical Engineers, Indoor Air Testing Standards
- VDI 2100 Blatt 4-2015 Gaseous ambient air measurement - Indoor air pollution measurement - Gas chromatographic determination of organic compounds - Methods of preparing calibration gases and calibration solutions
- VDI 2100 Blatt 4-2003 Gaseous ambient air measurement - Indoor air pollution measurement - Gas chromatographic determination of organic compounds; Calibration procedures as a measure for quality assurance
- VDI 6022 Blatt 6 Berichtigung-2016 Ventilation and indoor-air quality - Air humidification on decentralised devices - Planning, construction, operation, maintenance - Corrigendum concerning standard VDI VDI 6022 Blatt 6:2013-12
PT-IPQ, Indoor Air Testing Standards
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Indoor Air Testing Standards
- PREN 4618-2004 Aerospace series Aircraft internal air quality standards@ criteria and determination methods (Edition P 1)
- TR 4618-2014 Aerospace series Aircraft internal air quality standards@ criteria and determination methods (Edition 1; Incorporated Corrigendum: 11/13/2014)
Underwriters Laboratories (UL), Indoor Air Testing Standards
- UL ECVP 2905-2023 UL Standard for Safety Environmental Claim Validation Procedure for Indoor Air Quality (IAQ) Sensor Performance
European Committee for Standardization (CEN), Indoor Air Testing Standards
- EN 4618:2009 Aerospace series - Aircraft internal air quality standards, criteria and determination methods
International Electrotechnical Commission (IEC), Indoor Air Testing Standards
- IEC TR2 61462:1998 Composite insulators - Hollow insulators for use in outdoor and indoor electrical equipment - Definitions, test methods, acceptance criteria and design recommendations
National Metrological Verification Regulations of the People's Republic of China, Indoor Air Testing Standards
- JJG(核工) 17-1991 Test Method for Determination of Radioactive Gas Activity Using Inner Gas Proportional Counting Standard Device
PL-PKN, Indoor Air Testing Standards
- PN Z04188-01-1988 Air purity protection ests for 1,3-propane sultone ntroduction and scope f the standard
Lithuanian Standards Office , Indoor Air Testing Standards
- LST EN 4618-2010 Aerospace series - Aircraft internal air quality standards, criteria and determination methods
CEN - European Committee for Standardization, Indoor Air Testing Standards
- PREN 4618-2013 Aerospace series - Aircraft internal air quality standards@ criteria and determination methods
VE-FONDONORMA, Indoor Air Testing Standards