ZH
RU
ES

Inspection in inspection report

Inspection in inspection report, Total:150 items.

In the international standard classification, Inspection in inspection report involves: Company organization and management, Vocabularies, Information sciences. Publishing, Fluid storage devices, Pumps, Farming and forestry, Medical equipment, Aerosol containers, Laboratory medicine, Quality, Applications of information technology, Services, Technical drawings, Aids for disabled or handicapped persons, Character sets and information coding, Transport, Technical product documentation, Water quality, Medical sciences and health care facilities in general, Astronomy. Geodesy. Geography, Manufacturing forming processes, Environmental protection, Test conditions and procedures in general, Electrical engineering in general, Alarm and warning systems, Burners. Boilers, Materials for aerospace construction, Protective equipment, Aircraft and space vehicles in general, Non-destructive testing, Glass, Ceramics, Protection against fire, Coatings and related processes used in aerospace industry, Measurement of volume, mass, density, viscosity, Solar energy engineering, Open systems interconnection (OSI), Animal feeding stuffs, Document imaging applications, Lifting equipment, Microbiology, Milk and milk products, Acoustics and acoustic measurements, Testing of metals, Electronic components in general, Fluid power systems, Construction materials, Road engineering, Pulps, Products of the chemical industry, Machine tool systems, Lubricants, industrial oils and related products.


American Welding Society (AWS), Inspection in inspection report

Group Standards of the People's Republic of China, Inspection in inspection report

  • T/HNCAA 029-2021 Compilation of inspection testing reports
  • T/NAIA 090-2021 Inspection and testing report preparation rules
  • T/CAS 457-2020 Basic Information Requirements for Electronic Inspection and Testing Report
  • T/HNCAA 032-2022 Standard for compiling construction project quality inspection and testing report
  • T/SXHJ 0005-2022 Welding Inspection Report Drawing Method with Drawing Part 2 Boiler
  • T/SXHJ 0003-2022 Welding Inspection Report Drawing Method Part 1 Pressure Vessel
  • T/SXHJ 0006-2022 Welding Inspection Report Drawing Method with Drawings Part 2 Pressure Piping

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Inspection in inspection report

  • GB/T 2930.11-2008 Grass Seed Inspection Regulation Inspection Report
  • GB/T 2930.11-2001 Rules for forage seed testing-Testing report
  • GB/T 18375.8-2004 Prosthetics-Structural testing of lower-limb prostheses-Part 8:Test report
  • GB/T 22274.3-2008 Good Laboratory Practice Guidelines for Supervising Authorities Part 3: Guidelines for the Preparation of Good Laboratory Practice Inspection Reports
  • GB/T 13092-1991 Method for determination of Molds in feeds
  • GB 13092-1991 Method for testing mold in feed
  • GB/T 18375.4-2001 Prosthetics--Structural testing of lower-limb prostheses--Part 4: Loading parameters of principal structural tests

Professional Standard - Agriculture, Inspection in inspection report

Liaoning Provincial Standard of the People's Republic of China, Inspection in inspection report

German Institute for Standardization, Inspection in inspection report

  • DIN 5017:1992 Business forms; inspection report
  • DIN EN 2078:2003 Aerospace series - Metallic materials - Manufacturing schedule, inspection schedule, inspection and test report; Definition, general principles, preparation and approval; German and English version EN 2078:2001
  • DIN EN 2078:2003-06 Aerospace series - Metallic materials - Manufacturing schedule, inspection schedule, inspection and test report; Definition, general principles, preparation and approval; German and English version EN 2078:2001
  • DIN 52340-1:1974 Testing of glass; chemical analysis of colourless soda-lime-glass with SiO<(Index)2>, CaO, MgO and Na<(Index)2>O as main constituents; general remarks and test report
  • DIN 52240-1:1994 Testing of raw materials for the production of glass; chemical analysis of limestone with a minimum content of 95% calcium carbonate; general data and test report
  • DIN 51074-1:1971 Testing of ceramic materials; chemical analysis of ceramic materials containing chromium oxide, general instructions and test report
  • DIN 19051-3 Bb.1:1981 Tests for Reprographic Use; DIN-test Assembly (Test Table) for Testing the Microfilming of Technical Drawings; Neutral Density Cards for Use in Practice
  • DIN 79002:2015 Detection and alert systems for emergencies under water in swimming pools - Safety requirements and test methods
  • DIN 75407:1986 Fixtures for advance warning triangle in passenger cars; requirements, tests
  • DIN 10182-2:1982 Microbiological analysis of milk; detection of inhibitors in milk; routine method (brilliant black reduction test)
  • DIN EN 14584:2005 Non-destructive testing - Acoustic emission - Examination of metallic pressure equipment during proof testing - Planar location of AE sources; English version of DIN EN 14584
  • DIN 1996-20:1992 Testing of asphalt; preparation of bituminous mixtures in laboratory
  • DIN 51834-1:2010 Testing of lubricants - Tribological test in the translatory oscillation apparatus - Part 1: General working principles
  • DIN 51834-1:2004 Testing of lubricants - Tribological test in the translatory oscillation apparatus - Part 1: General working principles

Taiwan Provincial Standard of the People's Republic of China, Inspection in inspection report

U.S. Air Force, Inspection in inspection report

Henan Provincial Standard of the People's Republic of China, Inspection in inspection report

  • DB4106/T 81-2022 Specifications for the preparation of agricultural product inspection and testing reports
  • DB41/T 1116-2015 How to draw drawings of pressure vessel inspection report
  • DB41/T 851-2013 General Requirements for Electromechanical Special Equipment Inspection and Report (Certificate)
  • DB41/T 852-2013 Specifications for numbering of inspection reports (certificates) and related documents for electromechanical special equipment

HU-MSZT, Inspection in inspection report

Professional Standard - Public Safety Standards, Inspection in inspection report

  • GA/T 201-1998 Compiling rule of a report for physical and chemical examination

国家市场监督管理总局、中国国家标准化管理委员会, Inspection in inspection report

  • GB/T 39663-2021 Compilation specifications of integrity report for inspection body and laboratory
  • GB/T 40850-2021 Method for the detection of Enterobacteriaceae in feed

Shanxi Provincial Standard of the People's Republic of China, Inspection in inspection report

  • DB1404/T 6-2021 Inspection and testing agency report issuance management requirements

Inner Mongolia Provincial Standard of the People's Republic of China, Inspection in inspection report

Shaanxi Provincial Standard of the People's Republic of China, Inspection in inspection report

  • DB61/T 1327.5-2020 Qualification Accreditation of Inspection and Testing Institutions Part 5: Specifications for Preparation of Inspection and Testing Reports

Jilin Provincial Standard of the People's Republic of China, Inspection in inspection report

British Standards Institution (BSI), Inspection in inspection report

  • BS ISO 10328-8:1997 Prosthetics.Structural testing of lower-limb prostheses - Test report
  • TH 20344-2008 Boilers and Pressure Vessels - An international survey of design and approval requirements
  • BS M 38:1971 Guide to compilation of instructions and reports for the in-service non-destructive testing of aerospace products
  • BS EN 2078:2002 Aerospace series - Metallic materials - Manufacturing schedule, inspection schedule, inspection and test report - Definition, general principles, preparation and approval
  • BS EN 14584:2013 Non-destructive testing. Acoustic emission testing. Examination of metallic pressure equipment during proof testing. Planar location of AE sources
  • BS EN 14584:2005 Non-destructive testing. Acoustic emission. Examination of metallic pressure equipment during proof testing. Planar location of AE sources

FI-SFS, Inspection in inspection report

Hubei Provincial Standard of the People's Republic of China, Inspection in inspection report

  • DB42/T 2100-2023 General Technical Specifications for QR Codes on Inspection Reports

Jiangsu Provincial Standard of the People's Republic of China, Inspection in inspection report

  • DB32/T 4488-2023 Specifications for the preparation of inspection and testing agency qualification accreditation review reports

Professional Standard - Traffic, Inspection in inspection report

  • JT/T 828-2012 Guidelines on the preparation of highway experimentation and test data reports

Hebei Provincial Standard of the People's Republic of China, Inspection in inspection report

American Society for Testing and Materials (ASTM), Inspection in inspection report

  • ASTM D4025-97 Standard Practice for Reporting Results of Examination and Analysis of Deposits Formed from Water for Subsurface Injection
  • ASTM D4025-97(2003) Standard Practice for Reporting Results of Examination and Analysis of Deposits Formed from Water for Subsurface Injection
  • ASTM D4025-08 Standard Practice for Reporting Results of Examination and Analysis of Deposits Formed from Water for Subsurface Injection
  • ASTM D4025-08a Standard Practice for Reporting Results of Examination and Analysis of Deposits Formed from Water for Subsurface Injection
  • ASTM D933-84(2003) Standard Practice for Reporting Results of Examination and Analysis of Water-Formed Deposits
  • ASTM D933-20 Standard Practice for Reporting Results of Examination and Analysis of Water-Formed Deposits
  • ASTM D4025-08a(2013) Standard Practice for Reporting Results of Examination and Analysis of Deposits Formed from Water for Subsurface Injection
  • ASTM D933-84(2012) Standard Practice for Reporting Results of Examination and Analysis of Water-Formed Deposits
  • ASTM F1194-99 Standard Guide for Documenting the Results of Chemical Permeation Testing of Materials Used in Protective Clothing
  • ASTM F1194-99(2005) Standard Guide for Documenting the Results of Chemical Permeation Testing of Materials Used in Protective Clothing
  • ASTM F1194-99(2010) Standard Guide for Documenting the Results of Chemical Permeation Testing of Materials Used in Protective Clothing
  • ASTM E2848-11e1 Standard Test Method for Reporting Photovoltaic Non-Concentrator System Performance
  • ASTM E2848-13 Standard Test Method for Reporting Photovoltaic Non-Concentrator System Performance
  • ASTM E2848-13(2023) Standard Test Method for Reporting Photovoltaic Non-Concentrator System Performance
  • ASTM E493-97 Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode
  • ASTM E493-06 Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode

European Association of Aerospace Industries, Inspection in inspection report

  • AECMA PREN 2078-1982 Manufacturing Schedule - Inspection Schedule and Inspection Report - General Definitions Aerospace Series
  • AECMA PREN 2078-1997 Aerospace Series Metallic Materials Manufacturing Schedule, Inspection Schedule, Inspection and Test Report Definition, General Principles, Preparation and Approval Edition 2

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Inspection in inspection report

  • PREN 2078-1982 Manufacturing Schedule - Inspection Schedule and Inspection Report - General Definitions Aerospace Series
  • PREN 2078-1997 Aerospace Series Metallic Materials Manufacturing Schedule@ Inspection Schedule@ Inspection and Test Report Definition@ General Principles@ Preparation and Approval (Edition 2)

Shanghai Provincial Standard of the People's Republic of China, Inspection in inspection report

  • DB31/T 60.2-1991 Naming rules and classification of inspection items in medical and health medical inspection reports
  • DB31/T 60.1-1991 Basic Requirements for Medical Inspection Report Form
  • DB31/T 60.3-1991 Format and printing quality of medical and health medical examination report

US-Unspecified Preparing Activity, Inspection in inspection report

Shandong Provincial Standard of the People's Republic of China, Inspection in inspection report

  • DB37/T 2386-2013 General requirements for metal and non-metal mine safety production inspection and inspection report

Professional Standard - Surveying and Mapping, Inspection in inspection report

  • CH/Z 1001-2007 Basic Rules for Testing Report of Surveying and Mapping Products Quality

Anhui Provincial Standard of the People's Republic of China, Inspection in inspection report

  • DB34/T 2146-2014 Specifications for the preparation of product quality supervision and spot check inspection reports

交通运输部, Inspection in inspection report

  • JT/T 828-2019 Guidelines for preparation of highway water transport test and inspection data reports

RU-GOST R, Inspection in inspection report

  • GOST 31900-2012 Principles of Good Laboratory Practice (GLP). Guidance for the preparation of GLP inspection reports
  • GOST R 8.835-2013 State system for ensuring the uniformity of measurements. Automatic catchweighing instruments. Part 2. Test report format

Professional Standard - Hygiene , Inspection in inspection report

  • WS/T 500.7-2016 Electronic medical record sharing document specification part 7: inspection report

Professional Standard-Safe Production, Inspection in inspection report

  • AQ/T 2074-2019 General requirements for safety testing and inspection reports of equipment and facilities in use in metal and nonmetal mines

European Committee for Standardization (CEN), Inspection in inspection report

  • prEN 2078-1992 Aerospace series; metallic materials; manufacturing schedule; inspection schedule; inspection and test report; description and rules for use
  • EN 2078:2001 Aerospace series - Metallic materials - Manufacturing schedule, inspection schedule, inspection and test report; Definition, general principles, preparation and approval
  • EN 2078:1993 Aerospace Series - Metallic Materials - Manufacturing Schedule - Inspection Schedule - Inspection and Test Report - Description and Rules for Use

Danish Standards Foundation, Inspection in inspection report

  • DS/EN 2078:2002 Aerospace series - Metallic materials - Manufacturing schedule, inspection schedule, inspection and test report - Definition, general principles, preparation and approval
  • DS/EN 2078:1993 Aerospace series. Metallic materials. Manufacturing schedule. Inspection schedule. Inspection and test report. Description and rules for use

Lithuanian Standards Office , Inspection in inspection report

  • LST EN 2078-2002 Aerospace series - Metallic materials - Manufacturing schedule, inspection schedule, inspection and test report - Definition, general principles, preparation and approval

AT-ON, Inspection in inspection report

US-AAMI, Inspection in inspection report

  • ANSI/AAMI EC57-1998 Testing and reporting performance results of cardiac rhythm and ST segment measurement algorithms

Aerospace, Security and Defence Industries Association of Europe (ASD), Inspection in inspection report

  • ASD-STAN PREN 2078-1997 Aerospace Series Metallic Materials Manufacturing Schedule, Inspection Schedule, Inspection and Test Report Definition, General Principles, Preparation and Approval (Edition 2)

Association Francaise de Normalisation, Inspection in inspection report

  • NF L10-006*NF EN 2078:2002 Aerospace series - Metallic materials - Manufacturing schedule, inspection schedule, inspection and test report - Definition, general principles, preparation and approval.
  • NF A09-391:2005 Non-destructive testing - Acoustic emission - Examination of metallic pressure equipment during proof testing - Planar location of AE sources

International Organization for Standardization (ISO), Inspection in inspection report

  • ISO/TS 22809:2007 Non-destructive testing - Discontinuities in specimens for use in qualification examinations
  • ISO/TR 23358:2022 Health informatics — A case study on establishing standardized measurement data in cardiac examination reports
  • ISO 18413:2015 Hydraulic fluid power - Cleanliness of components - Inspection document and principles related to contaminant extraction and analysis, and data reporting

US-CFR-file, Inspection in inspection report

  • CFR 15-743.2-2014 Commerce and foreign trade. Part743:Special reporting and notification. Section743.2:High performance computers:post shipment verification reporting.

IT-UNI, Inspection in inspection report

ES-UNE, Inspection in inspection report

  • UNE-EN 2078:2001 Aerospace series- Metallic materials- manufacturing schedule, inspection schedule, inspection and test report- Definition, general principles, preparation and approval. (Endorsed by AENOR in February of 2002.)
  • UNE 192001-15:2021 Inspection procedure for establishment affected by major-accident hazards involving dangerous substances. Part 15: Verification of safety report information

Korean Agency for Technology and Standards (KATS), Inspection in inspection report

KR-KS, Inspection in inspection report

  • KS X ISO/IEC 30107-3-2021 Information technology — Biometric presentation attack detection —Part 3: Testing and reporting

American National Standards Institute （ANSI), Inspection in inspection report

  • ANSI/NFPA 1911-2011 Standard for the Inspection, Maintenance, Testing, and Retirement of In-Service Automotive Fire Apparatus

RO-ASRO, Inspection in inspection report

  • STAS SR EN 2078-1995 Aerospace series Metallic materials. Manufacturing schedule. Inspection schedule. inspection and test report. Description and rules for use

Guangxi Provincial Standard of the People's Republic of China, Inspection in inspection report

TN-INNORPI, Inspection in inspection report

国家药监局, Inspection in inspection report

  • YY/T 1789.4-2022 In vitro diagnostic testing system performance evaluation methods Part 4: Linear intervals and reportable intervals

Professional Standard - Forestry, Inspection in inspection report

  • LY 1132-1993 Selection, Inspection and Scrapping of Wire Ropes for Aerial Cableways Used in Forestry

International Electrotechnical Commission (IEC), Inspection in inspection report

  • IEC 60419:1973 Guide for the inclusion of lot-by-lot and periodic inspection procedures in specifications for electronic components (or parts)

ATIS - Alliance for Telecommunications Industry Solutions, Inspection in inspection report

  • 1000082-2018 Technical Report on SHAKEN APIs for a Centralized Signing and Signature Validation Server

Professional Standard - Commodity Inspection, Inspection in inspection report

  • SN/T 0446-1995 Method for the determination of phosphorus in milk product for export

Japanese Industrial Standards Committee (JISC), Inspection in inspection report

  Test method for mercaptans in coking benzene products, Metrology in Analytical Testing, Inspection in inspection report, Testing for Mercury in Cosmetics, Fluorescent quantitative PCR in inspection and quarantine, Dissolution testing in drug testing, Methods for the examination of microorganisms in food, Quality Control in Inspection, Each of the biochemical analyzer tests, Test method of anthracene in water quality, Inspection of colorants in food, Inspection basis in the report, Check for carbon dioxide in the air, Test method for furazolidone residues in meat products for export, coli bacteria in food, Acidity test in food, How to test for E. coli in food, Method for the determination of furazolidone residues in meat products for export by liquid chromatography, How to test the soil, Moisture testing in food.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved