ZH
RU
ES

Comparison of methods in the laboratory

Comparison of methods in the laboratory, Total:263 items.

In the international standard classification, Comparison of methods in the laboratory involves: Quality, ENVIRONMENT. HEALTH PROTECTION. SAFETY, Wastes, Environmental protection, Air quality, Soil quality. Pedology, Civil engineering in general, Earthworks. Excavations. Foundation construction. Underground works, Wood, sawlogs and sawn timber, Protection against fire, Construction materials, Continuous handling equipment, Analytical chemistry, Wood technology processes, Water quality, Refractories, Insulating materials, Pulps, Petroleum products in general, Fuels, Surface treatment and coating, Pipeline components and pipelines, Acoustics and acoustic measurements, Installations in buildings, Rubber, Test conditions and procedures in general, Meat, meat products and other animal produce, Products of the chemical industry, Leather technology, Paints and varnishes, Internal combustion engines for road vehicles, Road engineering, Crude petroleum, Waxes, bituminous materials and other petroleum products, Protection of and in buildings, Hydraulic construction, Biology. Botany. Zoology, Medical sciences and health care facilities in general, Pharmaceutics, Paint coating processes, Structures of buildings, Solar energy engineering, Radiation measurements, Pesticides and other agrochemicals, Ferrous metals.

RU-GOST R, Comparison of methods in the laboratory

GOST R ISO 13528-2010 Statistical methods. Using in proficiency testing by interlaboratory comparison tests
GOST R 50779.60-2017 Statistical methods for use in proficiency testing by interlaboratory comparison
GOST R 56771-2015 Acoustics. Laboratory method of noise measurement from water supply installations inside buildings
GOST ISO 3675-2014 Crude petroleum and liquid petroleum products. Laboratory method for determination of density by hydrometer
GOST R 56698-2015 Methods of testing the chemicals of human hazard. Reproductive toxicity studies on two generations of laboratory animals
GOST R 53133.2-2008 Medical laboratory technologies. Quality control of clinical laboratory tests. Part 2. Rules for intra-laboratory quality control of quantitative methods of clinical laboratory tests using control materials

Association Francaise de Normalisation, Comparison of methods in the laboratory

NF X06-510*NF ISO 13528:2015 Statistical methods for use in proficiency testing by interlaboratory comparison
NF X06-510:2005 Statistical methods for use in proficiency testing by interlaboratory comparisons.
NF ISO 13528:2022 Méthodes statistiques utilisées dans les essais d'aptitude par comparaison interlaboratoires
NF ISO 12828-2:2020 Méthode de validation des analyses de gaz d'incendie - Partie 2 : validation intralaboratoire des méthodes de quantification
XP V03-111:1995 Analyse des produits agricoles et alimentaires - Protocole d'évaluation intra-laboratoire d'une méthode alternative d'analyse qualitative par rapport à une méthode de référence
NF T90-210:2009 Water quality - Protocol for the intial method performance assesment in a laboratory.
NF X65-040-2*NF ISO 12828-2:2020 Validation method for fire gas analysis - Part 2 : Intralaboratory validation of quantification methods
XP CEN/TS 17329-1:2019 Denrées alimentaires - Lignes directrices générales pour la validation des méthodes de PCR qualitative en temps réel - Partie 1 : validation intralaboratoire
NF B35-511:1983 Laboratory glassware. Density hydrometers for general purpose. Specifications. Test methods and use.
NF X41-531*NF EN 1390:2020 Wood preservatives - Determination of the eradicant action against Hylotrupes bajulus (Linnaeus) larvae - Laboratory method
NF X41-529*NF EN 47:2016 Wood preservatives - Determination of the toxic values against larvae of Hylotrupes bajulus (Linnaeus) - (Laboratory method)
NF EN 1390:2020 Produits de préservation du bois - Détermination de l'action curative contre les larves d'Hylotrupes bajulus (Linnaeus) - Méthode de laboratoire
NF P98-818-32/IN1:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 32 : laboratory compaction of bituminous mixtures by vibratory compactor.
NF P98-818-32:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 32 : laboratory compaction of bituminous mixtures by vibratory compactor.
NF EN 118:2014 Produits de préservation des bois - Détermination de l'action préventive contre les espèces de Reticulitermes (termites européens) (méthode de laboratoire)
NF EN 47:2016 Produits de préservation du bois - Détermination du seuil d'efficacité contre les larves d'Hylotrupes bajulus (Linnaeus) - (Méthode de laboratoire)
NF EN 48:2005 Produits de préservation du bois - Détermination de l'action curative contre les larves d'Anobium punctatum (de Geer) (Méthode de laboratoire)
NF EN ISO 16140-5:2020 Microbiologie de la chaîne alimentaire - Validation des méthodes - Partie 5 : protocole pour la validation interlaboratoires de méthodes non commerciales par plan factoriel
NF EN 117:2013 Produit de préservation du bois - Détermination du seuil d'efficacité contre les termites européens du genre Reticulitermes (Méthode de laboratoire)
FD CEN/TR 17421:2020 Aliments pour animaux - Méthodes d'échantillonnage et d'analyse - Recommandations pour l'organisation et l'évaluation des études comparatives interlaboratoires utilisant des méthodes d'analyses multianalytes
NF EN 152:2012 Produits de préservation du bois - Détermination de l'efficacité préventive d'un traitement de protection du bois mis en oeuvre contre le bleuissement fongique - Méthode de laboratoire
FD A06-500*FD CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
NF EN 20-2:1993 Produit de préservation du bois - Détermination de l'efficacité protectrice vis-à-vis de lyctus brunneus (Stephens) - Partie 2 : application par traitement en profondeur (méthode de laboratoire).
NF EN 20-1:1992 Produit de préservation du bois - Détermination de l'efficacité protectrice vis-à-vis de lyctus brunneus (Stephens) - Partie 1 : application par traitement de surface (méthode de laboratoire).

Professional Standard - Certification and Accreditation, Comparison of methods in the laboratory

RB/T 208-2016 Internal quality control of chemical laboratory.Comparison test

Danish Standards Foundation, Comparison of methods in the laboratory

DS/ISO 13528:2005 Statistical methods for use in proficiency testing by interlaboratory comparisons
DS/CEN/TS 14793:2007 Stationary source emission - Intralaboratory validation procedure for an alternative method compared to a reference method
DS/ISO 5725:1982 Precision of test methods. Determination of repeatability and reproducibility by interlaboratory tests
DS/EN 1390:2006 Wood preservatives - Determination of the eradicant action against Hylotrupes bajulus (Linnaeus) larvae - Laboratory method
DS/EN 47/AC:2007 Wood preservatives - Determination of the toxic values against larvae of Hylotrupes bajulus (Linnaeus) - (Laboratory method)
DS/EN 47:2005 Wood preservatives - Determination of the toxic values against larvae of Hylotrupes bajulus (Linnaeus) - (Laboratory method)
DS/EN 48:2005 Wood preservatives - Determination of eradicant action against larvae of Anobium punctatum (De Geer) (laboratory method)
DS/EN 117:2013 Wood preservatives - Determination of toxic values against Reticulitermes species (European termites) (Laboratory method)
DS/EN 12697-32+A1:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor
DS/EN 118:2005 Wood preservatives - Determination of preventive action against Reticulitermes species (European termites) (Laboratory method)
DS/CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
DS/EN 152:2012 Wood preservatives - Determination of the protective effectiveness of a preservative treatment against blue stain in wood in service - Laboratory method

ZA-SANS, Comparison of methods in the laboratory

SANS 13528:2009 Statistical methods for use in proficiency testing by interlaboratory comparisons
SANS 12944-6:1998 Paints and varnishes - Corrosion protection of steel structures by protective paint systems Part 6: Laboratory performance test methods

Korean Agency for Technology and Standards (KATS), Comparison of methods in the laboratory

KS Q ISO 13528:2009 Statistical methods for use in proficiency testing by interlaboratory comparisons
KS A ISO/IEC GUIDE 43-2-2002(2012) Proficiency testing by interlaboratory comparisons－Part 2：Selection and use of proficiency testing schemes by laboratory accreditation bodies
KS A ISO/IEC GUIDE 43-1-2002(2012) Proficiency testing by interlaboratory comparisons－Part 1：Development and operation of proficiency testing schemes by laboratory accreditation bodies
KS Q ISO 13528-2017(2022) Statistical methods for use in proficiency testing by interlaboratory comparisons
KS A ISO/IEC GUIDE 43-2:2002 Proficiency testing by interlaboratory comparisons-Part 2:Selection and use of proficiency testing schemes by laboratory accreditation bodies
KS A ISO/IEC GUIDE 43-2:2013 Proficiency testing by interlaboratory comparisons－Part 2：Selection and use of proficiency testing schemes by laboratory accreditation bodies
KS Q ISO 13528:2017 Statistical methods for use in proficiency testing by interlaboratory comparisons
KS F 2352-1995 Testing method for effect of water on cohesion of compacted bitminous mixtures
KS A ISO/IEC GUIDE 43-1:2002 Proficiency testing by interlaboratory comparisons-Part 1:Development and operation of proficiency testing schemes by laboratory accreditation bodies
KS A ISO/IEC GUIDE 43-1:2013 Proficiency testing by interlaboratory comparisons－Part 1：Development and operation of proficiency testing schemes by laboratory accreditation bodies
KS M ISO 12944-6:2008 Paints and varnishes－Corrosion protection of steel structures by protective paint systems－Part 6：Laboratory performance test methods
KS M ISO 12944-6:2021 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 6: Laboratory performance test methods

国家市场监督管理总局、中国国家标准化管理委员会, Comparison of methods in the laboratory

GB/T 28043-2019 Statistical methods for use in proficiency testing by interlaboratory comparison

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Comparison of methods in the laboratory

GB/T 28043-2011 Statistical methods for use in proficiency testing by interlaboratory comparisons
GB/T 18260-2015 Method of laboratory test for toxicity of wood preservatives against termites
GB/T 18260-2000 Laboratory test method for wood preservatives of determining the protective effectiveness of preservatives against termits

API - American Petroleum Institute, Comparison of methods in the laboratory

API REPORT 83-50-1985 Interlaboratory and Intralaboratory Comparision of the API Drilling Fluids Bioassay Protocol

British Standards Institution (BSI), Comparison of methods in the laboratory

BS ISO 13528:2015 Statistical methods for use in proficiency testing by interlaboratory comparison
BS ISO 13528:2005 Statistical methods for use in proficiency testing by interlaboratory comparisons
BS DD CEN/TS 14793:2005 Stationary source emission — Intralaboratory validation procedure for an alternative method compared to a reference method
BS DD CEN/TS 14793:2006 Stationary source emission. Intralaboratory validation procedure for an alternative method compared to a reference method
BS ISO 13528:2022 Statistical methods for use in proficiency testing by interlaboratory comparison
BS ISO 12828-2:2016 Validation methods for fire gas analyses. Intralaboratory validation of quantification methods
BS 6401:1983 Method for measurement, in the laboratory, of the specific optical density of smoke generated by materials
BS ISO 16000-3:2011 Indoor air. Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air. Active sampling method
BS 4401-13:1979 Methods of test for meat and meat products - Determination of glucono-delta-lactone content (reference method)
BS ISO 17536-4:2019 Road Vehicles. Aerosol separator performance test for internal combustion engines - Laboratory fractional efficiency test method
BS EN 1390:2020 Wood preservatives. Determination of the eradicant action against Hylotrupes bajulus (Linnaeus) larvae. Laboratory method
PD ISO/TS 17536-2:2017 Road vehicles. Aerosol separator performance test for internal combustion engines. Laboratory test method
BS EN 12697-32:2003 Bituminous mixtures — Test methods for hot mix asphalt — Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor
22/30455532 DC BS EN 17886. Laboratory test method. assessment of the susceptibility of thermal insulation products to mould growth
PD ISO/TS 24498:2022 Tracked Changes. Paper, board and pulps. Estimation of uncertainty for test methods by interlaboratory comparisons
BS EN ISO 12944-6:1998 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Laboratory performance test methods
BS EN 47:2016 Tracked Changes. Wood preservatives. Determination of the toxic values against larvae of Hylotrupes bajulus (Linnaeus). (Laboratory method)
BS 5218:1989 Wood preservatives. Determination of the toxic values against Anobium punctatum (De Geer) by larval transfer (laboratory method)
18/30375502 DC BS EN 1390. Wood preservatives. Determination of the eradicant action against Hylotrupes bajulus (Linnaeus) larvae. Laboratory method
BS EN 993-13:1995 Methods of test for dense shaped refractory products - Specification for pyrometric reference cones for laboratory use
BS EN ISO 3822-1:1999+A1:2008 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Method of measurement
22/30452942 DC BS EN 117. Wood preservatives. Determination of toxic values against Reticulitermes species (European termites) (Laboratory method)
BS EN ISO 3743-1:2010 Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Engineering methods for small movable sources in reverberant fields. Comparison method for a hard-walled test room
19/30314257 DC BS ISO 17536-4. Road Vehicles. Aerosol separator performance test for internal combustion engines - Part 4. Laboratory fractional efficiency test method

International Organization for Standardization (ISO), Comparison of methods in the laboratory

ISO 13528:2005 Statistical methods for use in proficiency testing by interlaboratory comparisons
ISO 13528:2015 Statistical methods for use in proficiency testing by interlaboratory comparison
ISO/IEC Guide 43-2:1997 Proficiency testing by interlaboratory comparisons - Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies
ISO 13528:2022 Statistical methods for use in proficiency testing by interlaboratory comparison
ISO 340:2004 Conveyor belts - Laboratory scale flammability characteristics - Requirements and test method
ISO/IEC Guide 43-1:1997 Proficiency testing by interlaboratory comparisons - Part 1: Development and operation of proficiency testing schemes
ISO/TS 24498:2022 Paper, board and pulps — Estimation of uncertainty for test methods by interlaboratory comparisons
ISO 3675:1976 Crude petroleum and liquid petroleum products — Laboratory determination of density or relative density — Hydrometer method
ISO 5725:1986 Precision of test methods; Determination of repeatability and reproducibility for a standard test method by inter-laboratory tests
ISO/CD TR 20659-1:2023 Rheological test methods — Fundamentals and interlaboratory comparisons — Part 1: Determination of the yield point
ISO/DTR 20659-1:2023 Rheological test methods — Fundamentals and interlaboratory comparisons — Part 1: Determination of the yield point
ISO/TS 17536-2:2017 Road vehicles - Aerosol separator performance test for internal combustion engines - Part 2: Laboratory test method
ISO 17536-4:2019 Road Vehicles — Aerosol separator performance test for internal combustion engines — Part 4: Laboratory fractional efficiency test method
ISO 12944-6:1998 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 6: Laboratory performance test methods
ISO 12944-6:2018 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 6: Laboratory performance test methods
ISO/DIS 16000-43:2023 Indoor air — Part 43: Standard method for assessing the reduction rate of culturable airborne fungi by air purifiers using a test chamber

German Institute for Standardization, Comparison of methods in the laboratory

DIN V 55394-2:2000 Proficiency testing by interlaboratory comparisons - Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies (ISO/IEC Guide 43-2:1997)
DIN ISO 13528:2009 Statistical methods for use in proficiency testing by interlaboratory comparisons (ISO 13528:2005); Text in German and English
DIN CEN/TS 14793:2005 Stationary source emission - Intralaboratory validation procedure for an alternative method compared to a reference method; German version CEN/TS 14793:2005
DIN V 55394-1:2000 Proficiency testing by interlaboratory comparisons - Part 1: Development and operation of proficiency testing schemes (ISO/IEC Guide 43-1:1997)
DIN ISO 13528:2020 Statistical methods for use in proficiency testing by interlaboratory comparison (ISO 13528:2015, Corrected version 2016-10-15); Text in German and English
DIN ISO 13528:2020-09 Statistical methods for use in proficiency testing by interlaboratory comparison (ISO 13528:2015, Corrected version 2016-10-15); Text in German and English
DIN 12791-3:1983 Laboratory glassware; density hydrometers; use and test methods
DIN 12791-3:1983-06 Laboratory glassware; density hydrometers; use and test methods
DIN 38402-45:2014-06 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 45: Interlaboratory comparisons for proficiency testing of laboratories (A 45)
DIN EN 12697-32:2017 Bituminous mixtures - Test methods - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor; German and English version prEN 12697-32:2017
DIN 38402-45:2014 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 45: Interlaboratory comparisons for proficiency testing of laboratories (A 45)
DIN 38402-45:2003 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 45: Interlaboratory comparisons for proficiency testing of laboratories (A 45)
DIN EN 47:2016-11 Wood preservatives - Determination of the toxic values against larvae of Hylotrupes bajulus (Linnaeus) - (Laboratory method); German version EN 47:2016
DIN EN 17886:2022-08 Laboratory test method - Assessment of the susceptibility of thermal insulation products to mould growth; German and English version prEN 17886:2022 / Note: Date of issue 2022-07-08
DIN EN 1390:2020 Wood preservatives - Determination of the eradicant action against Hylotrupes bajulus (Linnaeus) larvae - Laboratory method
DIN EN 1390:2020-06 Wood preservatives - Determination of the eradicant action against Hylotrupes bajulus (Linnaeus) larvae - Laboratory method; German version EN 1390:2020
DIN EN 48:2005-07 Wood preservatives - Determination of eradicant action against larvae of Anobium punctatum (De Geer) (Laboratory method); German version EN 48:2005
DIN EN 12697-32:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor (includes Amendment A1:2007); English version of DIN EN 12697-32:2007-11
DIN EN 118:2014-03 Wood preservatives - Determination of preventive action against Reticulitermes species (European termites) (Laboratory method); German version EN 118:2013
DIN EN 117:2022-10 Wood preservatives - Determination of toxic values against Reticulitermes species (European termites) (Laboratory method); German and English version prEN 117:2022 / Note: Date of issue 2022-09-23*Intended as replacement for DIN EN 117 (2013-01).
DIN EN 117:2013-01 Wood preservatives - Determination of toxic values against Reticulitermes species (European termites) (Laboratory method); German version EN 117:2012 / Note: To be replaced by DIN EN 117 (2022-10).
DIN EN 117:2022 Wood preservatives - Determination of toxic values against Reticulitermes species (European termites) (Laboratory method); German and English version prEN 117:2022
DIN EN 20-2:2022 Wood preservatives - Determination of the protective effectiveness against Lyctus brunneus (Stephens) - Part 2: Application by impregnation (Laboratory method); German and English version prEN 20-2:2022
DIN EN 20-2:1993-05 Wood preservatives; determination of the protective effectiveness against Lyctus brunneus (Stephens); part 2: application by impregnation (laboratory method); German version EN 20-2:1993 / Note: To be replaced by DIN EN 20-2 (2022-10).
DIN EN 20-1:1992-09 Wood preservatives; determination of the effectiveness against Lyctus brunneus (Stephens); part 1: application by surface treatment (laboratory method); german version EN 20-1:1992 / Note: To be replaced by DIN EN 20-1 (2022-10).
DIN EN 152:2012-02 Wood preservatives - Determination of the protective effectiveness of a preservative treatment against blue stain in wood in service - Laboratory method; German version EN 152:2011

Professional Standard - Machinery, Comparison of methods in the laboratory

JB/T 8537-1997 Laboratory test method of dust specific electric resistance
JB/T 8537-2010 Testing method for dust resistivity in lab
JB/T 8537-2023 Testing method for dust resistivity in laboratory

CEN - European Committee for Standardization, Comparison of methods in the laboratory

PD CEN/TS 14793:2005 Stationary source emission - Intralaboratory validation procedure for an alternative method compared to a reference method
PREN 12697-32-2017 Bituminous mixtures - Test methods - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor
PREN 1390-2018 Wood preservatives - Determination of the eradicant action against Hylotrupes bajulus (Linnaeus) larvae - Laboratory method
EN 12697-32:2019 Bituminous mixtures - Test methods - Part 32: Specimen preparation by vibratory compactor
EN ISO 12944-6:2018 Paints and Varnishes - Corrosion Protection of Steel Structures by Protective Paint Systems - Part 6: Laboratory Performance Test Methods

Japanese Industrial Standards Committee (JISC), Comparison of methods in the laboratory

JIS A 1211:2009 Test methods for the California Bearing Ratio (CBR) of soils in laboratory
JIS A 1138:2005 Method of making test sample of concrete in laboratory
JIS A 1138:2018 Method of making test sample of concrete in laboratory
JIS Z 8405:2021 Statistical methods for use in proficiency testing by interlaboratory comparison
JIS Z 8405:2008 Statistical methods for use in proficiency testing by interlaboratory comparisons

American Society for Testing and Materials (ASTM), Comparison of methods in the laboratory

ASTM D1883-21 Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils
ASTM D1883-16 Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils
ASTM D1883-05 Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils
ASTM D1883-99 Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils
ASTM D1883-07e1 Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils
ASTM D1883-14 Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils
ASTM D1883-07e2 Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils
ASTM C604-02(2012) Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM D5374-93(1999) Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
ASTM D5374-93(2005) Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
ASTM D5374-22a Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
ASTM D5452-20 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
ASTM D5009-02(2005) Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
ASTM D5009-02 Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
ASTM D5009-96(2002) Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
ASTM D5009-96 Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
ASTM F2634-15(2021) Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method
ASTM D5374-22 Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
ASTM D5374-13 Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
ASTM D7625-10 Standard Test Method for Laboratory Determination of Abrasiveness of Rock Using the CERCHAR Method
ASTM D5009-02(2011) Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
ASTM D5009-02(2017) Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
ASTM D4575-99 Standard Test Methods for Rubber Deterioration8212;Reference and Alternative Method(s) for Determining Ozone Level in Laboratory Test Chambers
ASTM E2480-07 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method with Multi-Valued Measurands
ASTM D4575-99(2005) Standard Test Methods for Rubber Deterioration8212;Reference and Alternative Method(s) for Determining Ozone Level in Laboratory Test Chambers
ASTM D4575-09(2015) Standard Test Methods for Rubber Deterioration&x2014;Reference and Alternative Method(s) for Determining Ozone Level in Laboratory Test Chambers
ASTM D4575-09 Standard Test Methods for Rubber Deterioration8212;Reference and Alternative Method(s) for Determining Ozone Level in Laboratory Test Chambers
ASTM C793-23 Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants
ASTM C942-99(2004) Standard Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory
ASTM C942-99 Standard Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory
ASTM D5009-02(2023) Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
ASTM C942-15 Standard Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory
ASTM D3801-96e1 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
ASTM D7584-10(2015) Standard Test Method for Evaluating the Resistance of the Surface of Wet Blue to the Growth of Fungi in an Environmental Chamber
ASTM E2480-12 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method with Multi-Valued Measurands
ASTM F2634-15 Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method
ASTM D6034-96(2010)e1 Standard Test Method (Analytical Procedure) for Determining the Efficiency of a Production Well in a Confined Aquifer from a Constant Rate Pumping Test
ASTM C953-06 Standard Test Method for Time of Setting of Grouts for Preplaced-Aggregate Concrete in the Laboratory
ASTM E2554-07 Standard Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method in a Single Laboratory Using a Control Sample Program
ASTM C1549-02 Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer
ASTM C1549-04 Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer
ASTM C1549-09 Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer
ASTM C941-96 Standard Test Method for Water Retentively of Grout Mixtures for Preplaced-Aggregate Concrete in the Laboratory
ASTM C941-16 Standard Test Method for Water Retentivity of Grout Mixtures for Preplaced-Aggregate Concrete in the Laboratory
ASTM D6034-96 Standard Test Method (Analytical Procedure) for Determining the Efficiency of a Production Well in a Confined Aquifer from a Constant Rate Pumping Test
ASTM D6034-96(2004) Standard Test Method (Analytical Procedure) for Determining the Efficiency of a Production Well in a Confined Aquifer from a Constant Rate Pumping Test
ASTM C1068-15 Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry
ASTM E2249-19 Standard Test Method for Laboratory Measurement of Airborne Transmission Loss of Building Partitions and Elements Using Sound Intensity
ASTM C940-98a(2003) Standard Test Method for Expansion and Bleeding of Freshly Mixed Grouts for Preplaced-Aggregate Concrete in the Laboratory
ASTM C940-98a Standard Test Method for Expansion and Bleeding of Freshly Mixed Grouts for Preplaced-Aggregate Concrete in the Laboratory
ASTM C940-10 Standard Test Method for Expansion and Bleeding of Freshly Mixed Grouts for Preplaced-Aggregate Concrete in the Laboratory
ASTM C940-22 Standard Test Method for Expansion and Bleeding of Freshly Mixed Grouts for Preplaced-Aggregate Concrete in the Laboratory

GOSTR, Comparison of methods in the laboratory

GOST 34276-2017 Soils. Methods of laboratory determination of the specific resistance to penetration

Indonesia Standards, Comparison of methods in the laboratory

SNI 03-3400-1994 Test method for friction strenght of wood in laboratories.
SNI 13-6794-2002 Test methods for determination of fiber content on peat sample by drainage in the laboratory
SNI 03-6870-2002 Test methods of water permeability in the laboratory for smooth-grained soils with decrease pressure height

TH-TISI, Comparison of methods in the laboratory

TIS 5043.1-1997 Proficiency testing by interlaboratory comparisons.part 1: development and operation of proficiency testing schemes

Professional Standard - Forestry, Comparison of methods in the laboratory

LY/T 1283-1998 Method of laboratory test for toxicity of wood preservatives to decay fungi
LY/T 1284-1998 Method of laboratory test for toxicity of wood preservatives to soft-rot fungus
LY/T 1284-2012 Method of laboratory test for toxicity of wood preservatives to soft-rot fungus
LY/T 1283-02011 Laboratory test method for toxicity of wood preservatives to decaying fungi
LY/T1284-2012 Method of laboratory test for toxicity of wood preservatives to soft-rot fungus

Military Standard of the People's Republic of China-General Armament Department, Comparison of methods in the laboratory

GJB 8671.15-2015 Test methods for metallic cartridges Part 15: Comparative test of internal ballistic performance
GJB 5323-2004 Indoor test method for the shielding/interference performance of smoke screens on thermal imaging cameras

American National Standards Institute （ANSI), Comparison of methods in the laboratory

ANSI/ASTM D5374:1999 Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
ANSI/ASTM E2554:2013 Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method in a Single Laboratory Using a Control Sample Program

KR-KS, Comparison of methods in the laboratory

KS Q ISO 13528-2017 Statistical methods for use in proficiency testing by interlaboratory comparisons
KS M ISO 12944-6-2021 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 6: Laboratory performance test methods

BE-NBN, Comparison of methods in the laboratory

NBN S 01-201-1979 Acoustics - Determination of sound power levels of noise sources -Precision raethods for broad-band sources in reverberation rooms
NBN S 01-202-1979 Acoustics - Determination of sound power levels of noise sources -Precision methods for discrete-frequency and narrow-band sources in reverberation rooms

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Comparison of methods in the laboratory

ASHRAE DA-07-032-2007 Laboratory Evaluation of Residential Window Installation Methods on Stucco Wall Assemblies

未注明发布机构, Comparison of methods in the laboratory

BS EN 273:1992 Wood preservatives — Determination of the curative action against Lyctus brunneus (Stephens) (laboratory method)
BS EN ISO 3675:1998(2001)*BS 2000-160:1998 Methods of test for petroleum and its products — BS 2000 - 160 : Crude petroleum and liquid petroleum products — Laboratory determination of density — Hydrometer method
DIN EN 118:2005 Wood preservatives – Determination of the preventive effect against Reticulitermes species (European termites) (laboratory method)
DIN EN 117:2005 Wood preservatives – Determination of the limit of effectiveness against Reticulitermes species (European termites) (laboratory method)
DIN EN 25164:1994 Fuel for internal combustion engines; Prevention of detonation characteristics; Laboratory method (ISO 5164: 1990); German standard EN 25164: 1993
BS EN 20-2:1993(2000) Wood preservatives — Determination of the protectiveeffectiveness against Lyctus brunneus (Stephens) — Part 2 : Application by impregnation (laboratory method)
DIN EN 46-2:2006 Wood preservatives! Determination of the preventive effect against Hylotrupes bajulus (Linnaeus)! Part 2: Ovicidal effect (laboratory method)
BS EN 20-1:1992(1999) Wood preservatives — Determination of the protectiveeffectiveness against Lyctus brunneus (Stephens) — Part 1 : Application by surface treatment (laboratory method)

SE-SIS, Comparison of methods in the laboratory

SIS SS 02 72 26-1990 Wood preservatives — Determination of toxic values against Reticulitermes santonensis de Feytaud. (Laboratory method)
SIS SS 01 42 30-1982 Precision of test methods - Determina-tion of repeatability and reproducibility by inter-laboratory tests

European Committee for Standardization (CEN), Comparison of methods in the laboratory

EN 20:1974 Wood Preservatives: Determination of the Preventive Action Against Lyctus Brunneus: (Stephens) (Laboratory Method)
DD ENV 1390-1994 Wood Preservatives - Determination of the Eradicant Action Against Hylotrupes Bajulus (Linnaeus) Larvae - Laboratory Method
EN 12697-32:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor (Incorporates Amendment A1: 2007)
CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
EN ISO 3743-1:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010)
EN 49:1976 Wood Preservatives: Determination of the Toxic Values Against Anobium Punctatum (De Geer) by Egg-Laying and Larval Survival (Laboratory Method)

ES-UNE, Comparison of methods in the laboratory

UNE-EN 47:2016 Wood preservatives - Determination of the toxic values against larvae of Hylotrupes bajulus (Linnaeus) - (Laboratory method)
UNE-EN 1390:2021 Wood preservatives - Determination of the eradicant action against Hylotrupes bajulus (Linnaeus) larvae - Laboratory method
UNE-EN 117:2012 Wood preservatives - Determination of toxic values against Reticulitermes species (European termites) (Laboratory method)
UNE-EN 118:2014 Wood preservatives - Determination of preventive action against Reticulitermes species (European termites) (Laboratory method)
UNE-EN 20-2:1993 Wood preservatives - Determination of the protective effectiveness against Lyctus brunneus (Stephens) - Part 2: Application by impregnation (Laboratory method)
UNE-EN 20-1:1992 Wood preservatives - Determination of the protective effectiveness against Lyctus Brunneus (Stephens) - Part 1: Application by surface treatment (laboratory method)

Lithuanian Standards Office , Comparison of methods in the laboratory

LST EN 47-2005 Wood preservatives - Determination of the toxic values against larvae of Hylotrupes bajulus (Linnaeus) - (Laboratory method)
LST EN 1390-2006 Wood preservatives - Determination of the eradicant action against Hylotrupes bajulus (Linnaeus) larvae - Laboratory method
LST EN 47-2005/AC-2007 Wood preservatives - Determination of the toxic values against larvae of Hylotrupes bajulus (Linnaeus) - (Laboratory method)
LST EN 48-2005 Wood preservatives - Determination of eradicant action against larvae of Anobium punctatum (De Geer) (laboratory method)
LST EN 117-2013 Wood preservatives - Determination of toxic values against Reticulitermes species (European termites) (Laboratory method)
LST EN 12697-32+A1-2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor
LST EN 118-2005 Wood preservatives - Determination of preventive action against Reticulitermes species (European termites) (Laboratory method)
LST EN 20-2-2000 Wood preservatives - Determination of the protective effectiveness against Lyctus brunneus (Stephens) - Part 2: Application by impregnation (Laboratory method)
LST EN 152-2012 Wood preservatives - Determination of the protective effectiveness of a preservative treatment against blue stain in wood in service - Laboratory method

AENOR, Comparison of methods in the laboratory

UNE-EN 1390:2007 Wood preservatives - Determination of the eradicant action against Hylotrupes bajulus (Linnaeus) larvae - Laboratory method
UNE-EN 48:2007 Wood preservatives - Determination of eradicant action against larvae of Anobium punctatum (De Geer) (laboratory method)
UNE 400311-2:1998 LABORATORY GLASSWARE. DENSITY HYDROMETERS FOR GENERAL PURPOSES. PART 2: TEST METHODS AND USE.
UNE-EN 12697-32:2003+A1:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor
UNE-EN 152:2012 Wood preservatives - Determination of the protective effectiveness of a preservative treatment against blue stain in wood in service - Laboratory method

YU-JUS, Comparison of methods in the laboratory

JUS U.J5.060-1983 Testing methods of heat transfer troughout of bilding constructtons in laboratory

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Comparison of methods in the laboratory

ASHRAE 68-1986 Laboratory Method of Testing In-Duct Sound Power Measurement Procedure for Fans (AMCA 330-86)
ASHRAE LV-11-C053-2011 Development of an Experimental Methodology to Determine Monolayer and Multilayer Particle Resuspension from Indoor Surfaces

Professional Standard - Commodity Inspection, Comparison of methods in the laboratory

SN/T 1482-2004 Practice for laboratory internal quality control - MR pooled dynamic-ongoing-monitor technique

ES-AENOR, Comparison of methods in the laboratory

UNE-EN 302-2:1994 Adhesives for load-bearing timber structures. Test methods. Part 2: Determination of resistance to delamination (Laboratory method)

CZ-CSN, Comparison of methods in the laboratory

CSN 49 0684-1989 Wood preservatives. Laboratory me- thod of determination of toxic values against wood destroying fungi Basi- diomycetes

Professional Standard - Agriculture, Comparison of methods in the laboratory

NY/T 66-1987 Method for oryza sativa indica male sterile line maintainer line and F&sub1; true to variety seed testing
ZB B 21001-1987 Indoor inspection method for seed authenticity of indica rice sterile line (or hybrid) and maintainer line
NY/T 1965.3-2013 Guidelines for crop safety evaluation of pesticides.Part 3:Laboratory test for crop safety evaluation of seed treatment agents
NY/T 1155.11-2011 Pesticide guidelines for laboratory bioactivity tests.Part 11: Herbicide activity on Spirogyra crassa
NY/T 1965.1-2010 Guidelines for crop safety evaluation of pesticides.Part 1: Laboratory test for crop safety evaluation of fungicides and insecticides

Standard Association of Australia （SAA）, Comparison of methods in the laboratory

AS 1289.6.1.2:1998(R2013)
AS 1289.6.1.1:2014 Methods of testing soils for engineering purposes, Method 6.1.1: Soil strength and consolidation tests — Determination of the California Bearing Ratio of a soil — Standard laboratory method for a remoulded specimen

PL-PKN, Comparison of methods in the laboratory

PN-EN 152-2011 P Wood preservatives--Determination of the protective effectiveness of a preservative treatment against blue stain in wood in service--Laboratory method

NL-NEN, Comparison of methods in the laboratory

NEN-EN 20-1-1992 Wood preservatives. Determination of the protective effectiveness against Lyctus Brunneus (Stephens). Part 1: Application by surface treatment (laboratory method)