ZH
RU
ES
temperature differential thermogravimetry
temperature differential thermogravimetry, Total:500 items.
In the international standard classification, temperature differential thermogravimetry involves: Products of the chemical industry, Thermodynamics and temperature measurements, Education, Reinforced plastics, Products of the textile industry, Nuclear energy engineering, Refrigerating technology, Plastics, Iron and steel products, Welding, brazing and soldering, Rubber, Materials for the reinforcement of composites, Insulating materials, Pipeline components and pipelines, Metrology and measurement in general, Resistors, Heat treatment, Raw materials for rubber and plastics, Optics and optical measurements, Lubricants, industrial oils and related products, Refractories, Electricity. Magnetism. Electrical and magnetic measurements, Milk and milk products, Electrical equipment for working in special conditions, Protection of and in buildings, Solar energy engineering, Furniture, Physics. Chemistry, Installations in buildings, Burners. Boilers, Heat pumps, Adhesives, Surface treatment and coating, Linear and angular measurements, Testing of metals, Pulps, Waxes, bituminous materials and other petroleum products, Automatic controls for household use, Mechanical testing, On-board equipment and instruments, Geology. Meteorology. Hydrology, Electronic display devices, Domestic, commercial and industrial heating appliances, Rubber and plastics products, Occupational safety. Industrial hygiene, Protection against fire, Valves, Fluid power systems, Materials for aerospace construction, Electrical engineering in general, Leather technology, Analytical chemistry, Services.
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, temperature differential thermogravimetry
- GB/T 19469-2004 Determination of ignition temperature of pyrotechnic composition-DTA-TG analysis
- GB/T 17594-1998 Textile material--Test method for themotransition temperature--Differential scanning calorimetry (DSC)
- GB/T 18591-2001 Welding--Guidance on the measurement of preheating temperature,interpass temperature and preheat maintenance temperature
- GB/T 32681-2016 Plastics.Phenolic resins.Determination of heats and temperatures of reaction by differential scanning calorimetry
- GB/T 29189-2012 Thermo gravimetric analysis(TGA) for determination of oxidation temperature and ash content of carbon nanotubes
- GB/T 19466.3-2004 Plastics-Differential scanning calorimetry(DSC)-Part 3:Determination of temperature and enthalpy of melting and crystallization
- GB/T 30825-2014 Pyrometry for heat treatment
- GB/T 1634-1979 Test method of heat deflection temperature under bending load for plastics
- GB/T 29611-2013 Rubber,raw.Determination of the glass transition temperature.Differential scanning calorimetry (DSC)
- GB/T 5989-1998 Refractory products--Determination of Refractoriness-under-load--Differential-with rising temperature
- GB/T 5989-2023 Refractory products—Determination of refractoriness under load(differential method with rising temperature)
- GB/T 5989-2008 Refractory products.Determination of refractoriness-under-load.Differential method with rising temperature
- GB/T 4893.7-1985 Furniture--Assessment of surface resistance to alternation of heat and cold
- GB/T 704-1988 Dimensions, shape, weight and tolerances for hot-rolled flats
- GB/T 14981-1994 Dimenisions shape weight and tolerances for hot-rolled wire rods
- GB/T 707-1988 Hot-rolled channel steel--Dimensions,shape,weight and tolerances
- GB/T 14981-2004 Dimenisions,shape,mass and tolerances for hot-rolled wire rods
- GB/T 702-2008 Dimensions, shapes, weights and allowable deviations of hot-rolled steel bars
- GB 707-1988 Dimensions, shapes, weights and allowable deviations of hot-rolled channel steel
- GB/T 9946-1988 Dimensions,shape,weight and tolerances for hot-rolled L-sectional steel
- GB/T 706-1988 Hot-rolled beam steel--Dimensions,shape,weight and tolerances
- GB/T 14981-2009 Dimension,shape,mass and tolerance for hot-rolled round wire rod
- GB/T 13189-1991 Geanral specification for the indirectly heated thermistors with negative temperature coefficient
- GB/T 19466.2-2004 Plastics-Differential scanning calorimetry(DSC)-Part 2:Determination of glass transition temperature
- GB/T 9787-1988 Hot-rolled equal-leg angle steel--Dimensions,shape,weight and tolerances
- GB/T 702-1986 Hot-rolled round and square steels--Dimension,shape,weight and tolerance
- GB/T 9788-1988 Hot-rolled unequal-leg angle steel--Dimensions,shape,weight and tolerances
- GB/T 702-2004 Hot-rolled round and square steel bars-Dimension,Shape,weight and tolerance
- GB 702-1986 Hot-rolled round and square steels—Dimension, shape, weight and tolerance
- GB/T 911-2004 Dimensions,shapes,weight and tolerances for hot-rolled tool flat steels
- GB/T 33466.1-2016 Rigid PVC pipes.Differential scanning calorimetry (DSC) method.Part 1:Measurement of the processing temperature
- GB/T 20910-2007 Temperature/pressure safety valve for hot water supply system
- GB/T 709-1988 Dimensions, shape, weight and tolerances for hot-rolled plates and sheets
- GB/T 709-2006 Dimension, shape, weight and tolerances for hot-rolled steel plates and sheets
Professional Standard - Machinery, temperature differential thermogravimetry
- JB/T 6856-1993 Thermogravimetry-differential thermal analyzer
- JB/T 6856-2017 Thermogravimetric-Differential Thermal Analyzer
- JB/T 9477.2-1999 Directly heated measuring type negative temperature coefficient thermistors
- JB/T 12841-2016 Low ambient temperature air source heat pump water heater
- JB/T 9477.4-1999 Indirectly heated temperature coefficient thermistors
- JB/T 8630-1997 Test method of determining melting heat, melting point and crystallization heat and crystallizing point of electrical insulation materials with differential scanning calorimetric method
- JB/T 9475-1999 Critical temperature resistors
- JB/T 9477.1-1999 Directly heated common negative temperature coefficient thermistors
- JB/T 9477.3-1999 Directly heated voltage - stabilizing type negative temperature coefficient thermistors
- JB/T 9474-1999 Positive temperature coefficient thermistors
- JB/T 9474-2015 positive temperature coefficient thermistor
- JB/T 9477-2015 NTC Thermistor
American Society for Testing and Materials (ASTM), temperature differential thermogravimetry
- ASTM E967-97 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
- ASTM E967-03 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
- ASTM E967-08 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
- ASTM E967-18 Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
- ASTM E967-08(2014) Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
- ASTM E914-83(1993)e1 Practice for Evaluating Temperature Scale for Thermogravity
- ASTM E1356-98 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry or Differential Thermal Analysis
- ASTM E1582-93 Standard Practice for Calibration of Temperature Scale for Thermogravimetry
- ASTM E2716-09 Standard Test Method for Determining Specific Heat Capacity by Sinusoidal Modulated Temperature Differential Scanning Calorimetry
- ASTM E1582-21 Standard Test Method for Temperature Calibration of Thermogravimetric Analyzers
- ASTM E1952-17 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
- ASTM E1952-11 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
- ASTM E1952-23 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
- ASTM E1582-17 Standard Test Method for Temperature Calibration of Thermogravimetric Analyzers
- ASTM E1952-01 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
- ASTM E1952-06 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
- ASTM E1952-98 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
- ASTM E2602-09(2015) Standard Test Methods for the Assignment of the Glass Transition Temperature by Modulated Temperature Differential Scanning Calorimetry
- ASTM E2716-09(2014) Standard Test Method for Determining Specific Heat Capacity by Sinusoidal Modulated Temperature Differential Scanning Calorimetry
- ASTM E2602-22 Standard Test Methods for Assignment of the Glass Transition Temperature by Modulated Temperature Differential Scanning Calorimetry
- ASTM E2602-09 Standard Test Method for the Assignment of the Glass Transition Temperature by Modulated Temperature Differential Scanning Calorimetry
- ASTM E2069-06(2018) Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
- ASTM E1213-97 Standard Test Method for Minimum Resolvable Temperature Difference for Thermal Imaging Systems
- ASTM E1213-97(2002) Standard Test Method for Minimum Resolvable Temperature Difference for Thermal Imaging Systems
- ASTM E2069-19 Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
- ASTM D4591-97 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
- ASTM D4591-01 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
- ASTM D4591-07 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
- ASTM D4591-07(2012) Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
- ASTM D4591-17 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
- ASTM E2069-06 Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
- ASTM E2069-00 Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
- ASTM E2069-06(2012) Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
- ASTM D4591-22 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
- ASTM E537-98 Standard Test Method for Assessing the Thermal Stability of Chemicals By Methods of Thermal Analysis
- ASTM E2995-14 Standard Specification for ASTM Thermohydrometers with Integral Low-Hazard Thermometers
- ASTM E1213-97(2009) Standard Test Method for Minimum Resolvable Temperature Difference for Thermal Imaging Systems
- ASTM E2253-16 Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters
- ASTM E1213-14 Standard Practice for Minimum Resolvable Temperature Difference for Thermal Imaging Systems
- ASTM E1311-14 Standard Practice for Minimum Detectable Temperature Difference for Thermal Imaging Systems
- ASTM D6604-00 Standard Practice for Glass Transition Temperatures of Hydrocarbon Resins by Differential Scanning Calorimetry
- ASTM D6604-00(2013) Standard Practice for Glass Transition Temperatures of Hydrocarbon Resins by Differential Scanning Calorimetry
- ASTM D6604-00(2017) Standard Practice for Glass Transition Temperatures of Hydrocarbon Resins by Differential Scanning Calorimetry
- ASTM E2716-23 Standard Test Method for Determining Specific Heat Capacity by Modulated Temperature Differential Scanning Calorimetry
- ASTM E2995-15 Standard Specification for ASTM Thermohydrometers with Integral Low-Hazard Thermometers
- ASTM E1356-03 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry
- ASTM E2253-08 Standard Method for Enthalpy Measurement Validation of Differential Scanning Calorimeters
- ASTM E2253-21 Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters
- ASTM E2253-11 Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters
- ASTM E1356-08 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry
- ASTM E1299-96 Standard Specification for Reusable Phase-Change-Type Fever Thermometer for Intermittent Determination of Human Temperature
- ASTM D3418-03 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
- ASTM D4419-90(2005) Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)
- ASTM D4419-90(2010) Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)
- ASTM D3418-08 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
- ASTM E1356-08(2014) Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry
- ASTM E1356-23 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry
- ASTM E1311-89(2004) Standard Test Method for Minimum Detectable Temperature Difference for Thermal Imaging Systems
- ASTM E2995-15a Standard Specification for ASTM Thermohydrometers with Integral Low-Hazard Thermometers
- ASTM E2009-23 Standard Test Methods for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry
- ASTM E2009-08(2014)e1 Standard Test Methods for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry
- ASTM D3418-99 Standard Test Method for Transition Temperatures of Polymers By Differential Scanning Calorimetry
- ASTM D4498-07 Standard Test Method for Heat-Fail Temperature in Shear of Hot Melt Adhesives
- ASTM D3418-15 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
- ASTM E1543-14(2018) Standard Practice for Noise Equivalent Temperature Difference of Thermal Imaging Systems
- ASTM E1543-14(2022) Standard Practice for Noise Equivalent Temperature Difference of Thermal Imaging Systems
- ASTM E2009-02 Standard Test Method for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry
- ASTM D4419-90(2000) Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)
- ASTM D4419-90(1995)e1 Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)
- ASTM D4419-90(2015) Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)
- ASTM D4419-90(2021) Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)
Professional Standard - Education, temperature differential thermogravimetry
- JY/T 0589.5-2020 General Principles of Thermal Analysis Methods Part 5: Thermogravimetric-Differential Thermal Analysis and Thermogravimetric-Differential Scanning Calorimetry
- JY 42-1979 thermal thermometer
- JY/T 0042-2019 thermal thermometer for teaching
Group Standards of the People's Republic of China, temperature differential thermogravimetry
- T/CIE 082-2020 Method for detecting temperature difference of thermal insulation coating
- T/ZEIIA 01-2019 Negative temperature coefficient thermal temperature sensor
- T/ZZB 1465-2019 Low ambient temperature air source heat pump water heater
- T/CRES 0009-2022 Testing method of thermochemical energy storage temperature and energy density for solid compounds
- T/LJH 025-2023 Low ambient temperature air source heat pump heat conduction antifreeze
- T/CAS 302-2018 Performance technical specification for Multi-connected low ambient temperature air source heat pump air heaters
YU-JUS, temperature differential thermogravimetry
- JUS L.F2.010-1979 Measurement of temperature. Tabelesfor thermocouple. Thermocoupk. Vrcke1 - Chromium/Copper - Nickel
- JUS L.F2.008-1979 Measurement of temperature. Tabeles for thermocouple. Thermooouple J: Iron/Copper-Nickel
- JUS L.F2.009-1979 Measurement of temperature. Tabeles for thermocouple. ThermocoupleT: Copper/Copper-Nickel
- JUS L.F2.013-1995 Measurement of temperature in industrial process - Extension and compensating cables for thermocouples - Tolerances and identification system
- JUS L.F2.011-1979 Measurement of temperature. Tabelesfor thermocouple. /Thermocouple K: Nickel-Chromium/Nickel -Aluminium
- JUS M.E6.207-1997 Thermostats, temperature limiters and thermal cut-offs for heat generating systems; safety reauirements and testing
- JUS L.F2.006-1979 Measurement uf temperature. Tabeles for thermocouple. Thermocouple S Platmum 10 % Rhodium Platinum
RU-GOST R, temperature differential thermogravimetry
- GOST R 57952-2017 Fluoropolymers. Determining temperatures and heat of transition by differential scanning calorimetry
- GOST R 57969-2017 Polymer composites. Determination of specific heat capacity by differential scanning calorimetry with temperature modulation
- GOST R ISO 651-1994 Solid-stem calorimeter thermometers
- GOST 14894-1969 Thermoelectric standard 2-class and general industry use thermometers for low temperatures. Methods and means of verification
- GOST R 56724-2015 Plastics. Differential scanning calorimetry (DSC). Part 3. Determination of temperature and enthalpy of melting and crystallization
- GOST ISO 1893-2014 Refractory products. Determination of refractoriness under load. Differential method with rising temperature
- GOST 29127-1991 Plastics. Thermogravimetry of polymers. Temperature scanning method
- GOST R 55135-2012 Plastics. Differential scanning calorimetry (DSC). Part 2. Determination of glass transition temperature
- GOST R 8.728-2010 State system for ensuring the uniformity of measurements. Estimation of errors of measurements of thermal energy and weight of the heat-carrier of water systems of the heat supply
- GOST R ISO 7243-2007 Hot environments. Estimation of the heat stress on working man, based on the WBGT-index (wet bulb globe temperature)
Professional Standard - Energy, temperature differential thermogravimetry
工业和信息化部, temperature differential thermogravimetry
- JB/T 14644-2022 Air source heat pump unit for small temperature difference heat exchange
- HG/T 5052-2016 Test method for thermal shear failure temperature of hot melt adhesives
Association Francaise de Normalisation, temperature differential thermogravimetry
- NF T51-403*NF EN ISO 11409:1998 Plastics. Phenolic resins. Determination of heats and temperatures of reaction by differential scanning calorimetry.
- NF EN ISO 11357-3:2018 Plastiques - Analyse calorimétrique différentielle (DSC) - Partie 3 : détermination de la température et de l'enthalpie de fusion et de cristallisation
- NF A89-253*NF EN ISO 13916:2018 Welding - Measurement of preheating temperature, interpass temperature and preheat maintenance temperature
- NF EN ISO 13916:2018 Soudage - Mesurage de la température de préchauffage, de la température entre passes et de la température de maintien du préchauffage
- NF EN ISO 11409:1998 Plastiques - Résines phénoliques - Détermination des chaleurs et températures de réaction par calorimétrie différentielle à balayage.
- NF A89-253:1996 Welding. Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature.
- NF C26-214:1993 Determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry.
- NF EN ISO 11357-6:2018 Plastiques - Analyse calorimétrique différentielle (DSC) - Partie 6 : détermination du temps d'induction à l'oxydation (OIT isotherme) et de la température d'induction à l'oxydation (OIT dynamique)
- NF EN IEC 60539-2:2019 Thermistances à coefficient de température négatif à chauffage direct - Partie 2 : spécification intermédiaire - Thermistances à coefficient de température négatif pour montage en surface
- NF ISO 21870:2005 Ingrédients de mélange du caoutchouc - Noir de carbone - Détermination de la perte à la chaleur à haute température par thermogravimétrie
- NF C93-272-2/A1*NF EN 60539-2/A1:2011 Directly heated negative temperature coefficient thermistors - Part 2 : sectional specification - Surface mount negative temperature coefficient thermistors
- NF C93-272-2*NF EN 60539-2:2005 Directly heated negative temperature coefficient thermistors - Part 2 : sectional specification - Surface mount negative temperature coefficient thermistors
- NF P50-732:2008 Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations.
- NF T45-135*NF ISO 21870:2005 Rubber compounding ingredients - Carbon black - Determination of high-temperature loss on heating by thermogravimetry.
- NF P52-702:2006 Temperature control devices and temperature limiters for heat generating systems.
- NF P52-702*NF EN 14597:2012 Temperature control devices and temperature limiters for heat generating systems
- NF EN ISO 11357-2:2020 Plastiques - Analyse calorimétrique différentielle (DSC) - Partie 2 : détermination de la température et de la hauteur de palier de transition vitreuse
- NF T51-507-3:2013 Plastics - Differential scanning calorimetry (DSC) - Part 3: determination of temperature and enthalpy of melting and crystallization
- NF P50-732*NF EN ISO 10211:2017 Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations
- NF T51-507-3*NF EN ISO 11357-3:2018 Plastics - Differential scanning calorimetry (DSC) - Part 3 : determination of temperature and enthalpy of melting and crystallization
- NF B35-516:1983 Laboratory glassware. Thermo-alcoholometers and alcoholthermohydrometers.
- NF C93-272-1:2006 Directly heated negative temperature coefficient thermistors - Part 1 : Generic specification.
- NF C93-272-1:2012 Directly heated negative temperature coefficient thermistors - Part 1: generic specification
- NF C93-271:1974 Components for electronic equipment. Directly heated negative temperature coefficient thermistors.
Korean Agency for Technology and Standards (KATS), temperature differential thermogravimetry
- KS M ISO 11409:2006 Plastics－Phenolic resins－Determination of heats and temperatures of reaction by differential scanning calorimetry
- KS D 3052-2002(2017) Shape, dimensions, weight and tolerances of hot-rolled steel flats
- KS D 3052-1986 Shape, dimensions, weight and tolerances of hot-rolled steel flats
- KS M ISO 11409-2006(2017) Plastics－Phenolic resins－Determination of heats and temperatures of reaction by differential scanning calorimetry
- KS B ISO 13916-2003(2008) Welding－Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
- KS C 1608-1987 Indicating Thermoelectric Thermometers
- KS M ISO 11409-2006(2022) Plastics－Phenolic resins－Determination of heats and temperatures of reaction by differential scanning calorimetry
- KS B ISO 13916:2003 Welding-Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
- KS B ISO 13916:2013 Welding－Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
- KS C IEC 61074-2002(2012) Determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry
- KS C 1613-2009 Thermoelectric digital thermometer
- KS B ISO 651:2007 Solid-stem calorimeter thermometers
- KS C 1613-2019 Thermoelectric digital thermometer
- KS C 1608-2017(2022) Indicating thermoelectric thermometers
- KS C 1608-2017 Indicating thermoelectric thermometers
- KS C 1613-1989 Thermoelectric digital thermometer
- KS D 3502-2013 Dimensions, mass and permissible variations of hot rolled steel sections
- KS D 3502-2015 Dimensions, mass and permissible variations of hot rolled steel sections
- KS D 3052-2002 Shape, dimensions, weight and tolerances of hot-rolled steel flats
- KS M ISO 21870-2007(2017) Rubber compounding ingredients－Carbon black－Determination of high－temperature loss on heating by thermogravimetry
- KS M ISO 21870-2007(2022) Rubber compounding ingredients－Carbon black－Determination of high－temperature loss on heating by thermogravimetry
- KS C IEC 61074:2002 Determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry
- KS D 3052-2002(2022) Shape, dimensions, weight and tolerances of hot-rolled steel flats
- KS B ISO 651-2007(2017) Solid-stem calorimeter thermometers
- KS B 6156-2014 Temperature limiters and thermostats for hot water boilers
- KS B 6156-2003 Temperature limiters and thermostats for hot water boilers
- KS D 3051-2002(2022) Dimensions, weight and tolerances of hot rolled steel bars and bar in coil
- KS C 1610-2016 Thermistor for temperature measurement
- KS C 1610-1981 Thermistor for temperature measurement
- KS M ISO 22768:2021 Rubber, raw — Determination of the glass transition temperature by differential scanning calorimetry(DSC)
- KS C 2710-1990 General Rules for Directly Heated Negative Temperature Coefficient Thermistors
- KS C 2710-1990(2020) General Rules for Directly Heated Negative Temperature Coefficient Thermistors
- KS D ISO 1129:2005 Steel tubes for boilers, superheaters and heat exchangers-Dimensions, tolerances and conventional masses per unit length
- KS B 0404-2014 Corner and fillet radii of forged parts (Hot and warm forging)
- KS C 1610-1978 Thermistor for temperature measurement
- KS B 0404-1990 Corner and fillet radii of forged parts (Hot and warm forging)
- KS B ISO 651-2007(2022) Solid-stem calorimeter thermometers
- KS B 0404-1985 Corner and fillet radii of forged parts (Hot and warm forging)
- KS M ISO 11357-2-2015(2020) Plastics — Differential scanning calorimetry(DSC) — Part 2：Determination of glass transition temperature
- KS D 3051-2002 Dimensions, weight and tolerances of hot rolled steel bars and bar in coil
- KS D 3051-2002(2017) Dimensions, weight and tolerances of hot rolled steel bars and bar in coil
- KS M ISO 21870:2007 Rubber compounding ingredients－Carbon black－Determination of high－temperature loss on heating by thermogravimetry
- KS M ISO 11357-3:2018 Plastics — Differential scanning calorimetry(DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization
- KS C 1610-1978(2011) Thermistor for temperature measurement
- KS M ISO 11357-3:2013 Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization
- KS M ISO 11357-3:2003 Plastics -Differential scanning calorimetry (DSC) -Part 3:Determination of temperature and enthalpy of melting and crystallization
- KS B 6612-2019 Automatic temperature control system for heating
GOSTR, temperature differential thermogravimetry
- GOST R 57920-2017 Plastics. Phenolic resins. Determination of heat and temperature of reaction by differential scanning calorimetry
- GOST R 57830-2017 Composites. Determination of thermal conductivity and thermal diffusivity by modulated temperature differential scanning calorimetry
未注明发布机构, temperature differential thermogravimetry
- BS EN ISO 11409:1998(1999) Plastics — Phenolic resins — Determination of heats and temperatures of reaction by differential scanning calorimetry
- NB 20493-2018 Identification of thermocouple thermometers important for nuclear power plant safety
- BS 791:1990(2007) Specification for Solid - stem calorimeter thermometers
- BS ISO 18373-1:2007(2012) Rigid PVC pipes — Differential scanning calorimetry (DSC) method — Part 1 : Measurement of the processing temperature
North Atlantic Treaty Organization Standards Agency, temperature differential thermogravimetry
- STANAG 4515-2002 EXPLOSIVES: THERMAL CHARACTERIZATION BY DIFFERENTIAL THERMAL ANALYSIS, DIFFERENTIAL SCANNING CALORIMETRY AND THERMOGRAVIMETRIC ANALYSIS
- STANAG 4349-1995 MEASUREMENT OF THE MINIMUM RESOLVABLE TEMPERATURE DIFFERENCE (MRTD) OF THERMAL CAMERAS
- STANAG 4350-1995 CALCULATION OF MINIMUM RESOLVABLE TEMPERATURE DIFFERENCE (MRTD) FOR THERMAL IMAGING SYSTEMS
International Organization for Standardization (ISO), temperature differential thermogravimetry
- ISO 11409:1993 Plastics; phenolic resins; determination of heats and temperatures of reaction by differential scanning calorimetry
- ISO 13916:2017 Welding - Measurement of preheating temperature, interpass temperature and preheat maintenance temperature
- ISO 24087:2023 Rubber, vulcanized — Determination of the glass transition temperature and enthalpy by differential scanning calorimetry
- ISO 13916:1996 Welding - Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
- ISO 19935-2:2020 Plastics — Temperature modulated DSC — Part 2: Measurement of specific heat capacity cp
- ISO 651:1975 Solid-stem calorimeter thermometers
- ISO 22768:2006 Rubber, raw - Determination of the glass transition temperature by differential scanning calorimetry (DSC)
- ISO 1893:2007 Refractory products - Determination of refractoriness under load - Differential method with rising temperature
- ISO 1893:2005 Refractory products - Determination of refractoriness-under-load - Differential method with rising temperature
- ISO 19935-3:2021 Plastics - Temperature modulated DSC - Part 3: Separation of overlapping thermal transitions
- ISO 652:1975 Enclosed-scale calorimeter thermometers
- ISO 18373-1:2007 Rigid PVC pipes - Differential scanning calorimetry (DSC) method - Part 1: Measurement of the processing temperature
- ISO 22768:2020 Raw rubber and rubber latex — Determination of the glass transition temperature by differential scanning calorimetry (DSC)
- ISO 11357-2:2013 Plastics-Differential scaming calorimetery(DSC)-Past 2:Determination of glass transition temperature and glass transition step height
- ISO 11357-2:1999 Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature
- ISO 22768:2017 Rubber, raw — Determination of the glass transition temperature by differential scanning calorimetry (DSC)
- ISO 24144:2023 Thermal insulation — Test methods for specific heat capacity of thermal insulation for buildings in the high temperature range — Differential scanning calorimetry (DSC) method
- ISO 1129:1977 Title missing - Legacy paper document
- ISO 1129:1980 Steel tubes for boilers, superheaters and heat exchangers; Dimensions, tolerances and conventional masses per unit length
- ISO 10211-2:2001 Thermal bridges in building construction - Calculation of heat flows and surface temperatures - Part 2: Linear thermal bridges
- ISO/CD 22206:1980 Kraft lignin - Glass transition temperature by differential scanning calorimetry
- ISO/DIS 22206:2023 Kraft lignin — Glass transition temperature by differential scanning calorimetry
- ISO 10211:2007 Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations
- ISO 10211:2017 Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations
- ISO 21870:2005 Rubber compounding ingredients - Carbon black - Determination of high-temperature loss on heating by thermogravimetry
- ISO 11357-2:2020 Plastics — Differential scanning calorimetry (DSC) — Part 2: Determination of glass transition temperature and step height
- ISO 11357-3:2011 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
- ISO 11357-3:1999 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
- ISO 11357-3:2018 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
- ISO 871:2006 Plastics - Determination of ignition temperature using a hot-air furnace
- ISO 871:1996 Plastics - Determination of ignition temperature using a hot-air furnace
- ISO 871:2022 Plastics — Determination of ignition temperature using a hot-air furnace
Danish Standards Foundation, temperature differential thermogravimetry
- DS/EN ISO 11409:1999 Plastics - Phenolic resins - Determination of heats and temperatures of reaction by differential scanning calorimetry
- DS/EN ISO 13916:1997 Welding - Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
- DS/EN 61074:1994 Determination of heats and temperatures of melting and crystallixation of electrical insulating materials by differemtial scamming calorimetry
- DS/EN 60539-2/A1:2010 Directly heated negative temperature coefficient thermistors - Part 2: Sectional specification - Surface mount negative temperature coefficient thermistors
- DS/EN 60539-2:2004 Directly heated negative temperature coefficient thermistors - Part 2: Sectional specification - Surface mount negative temperature coefficient thermistors
- DS/ISO 18373-1:2007 Rigid PVC pipes - Differential scanning calorimetry (DSC) method - Part 1: Measurement of the processing temperature
- DS/EN 14597:2012 Temperature control devices and temperature limiters for heat generating systems
- DS/EN ISO 11357-3:2013 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
- DS/EN ISO 10211:2008 Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations
- DS/EN 60539-1:2008 Directly heated negative temperature coefficient thermistors - Part 1: Generic specification
German Institute for Standardization, temperature differential thermogravimetry
- DIN EN ISO 11409:1998 Plastics - Phenolic resins - Determination of heats and temperatures of reaction by differential scanning calorimetry (ISO 11409:1993); German version EN ISO 11409:1998
- DIN EN ISO 13916:2018-03 Welding - Measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:2017); German version EN ISO 13916:2017
- DIN EN ISO 11409:1998-10 Plastics - Phenolic resins - Determination of heats and temperatures of reaction by differential scanning calorimetry (ISO 11409:1993); German version EN ISO 11409:1998
- DIN 51004:1994 Thermal analysis; determination of melting temperatures of crystalline materials by differential thermal analysis
- DIN EN ISO 13916:1996 Welding - Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:1996); German version EN ISO 13916:1996
- DIN EN 61074:1994 Methods of test for the determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry (IEC 61074:1991); German version EN 61074:1993
- DIN EN ISO 11357-3:2018-07 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization (ISO 11357-3:2018); German version EN ISO 11357-3:2018
- DIN EN ISO 1893:2008 Refractory products - Determination of refractoriness under load - Differential method with rising temperature (ISO 1893:2007); German version EN ISO 1893:2008
- DIN 43732:1986 Measurement and control; electrical temperature sensors; thermocouples for thermocouple thermometers
- DIN 10290:1981 Thermohydrometer for the density measurement of milk and skim-milk
- DIN EN ISO 13916:2018 Welding - Measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:2017); German version EN ISO 13916:2017
- DIN EN IEC 60539-2:2020-12 Directly heated negative temperature coefficient thermistors - Part 2: Sectional specification - Surface mount negative temperature coefficient thermistors (IEC 60539-2:2019); German version EN IEC 60539-2:2019 / Note: DIN EN 60539-2 (2011-04) remains ...
- DIN EN 14597:2015-02 Temperature control devices and temperature limiters for heat generating systems; German version EN 14597:2012
- DIN EN ISO 10211:2018-03 Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations (ISO 10211:2017); German version EN ISO 10211:2017
- DIN EN 61074:1994-07 Methods of test for the determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry (IEC 61074:1991); German version EN 61074:1993
- DIN EN ISO 11357-2:2020-08 Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and step height (ISO 11357-2:2020); German version EN ISO 11357-2:2020
- DIN 65597:1993-12 Aerospace; fibre reinforced plastics; determination of temperature difference on exothermic reaction
- DIN 17052-1:2000 Heat treatment furnaces - Part 1: Requirements for temperature uniformity
- DIN 1027:2004 Steel bars - Hot-rolled zees with round edges - Dimensions, masses, tolerances, static values
- DIN EN 60539-1:2008 Directly heated negative temperature coefficient thermistors - Part 1: Generic specification (IEC 60539-1:2008); German version EN 60539-1:2008
- DIN EN ISO 10211:2008 Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations (ISO 10211:2007); English version of DIN EN ISO 10211:2008-04
- DIN 44082:1985 Thermistors; PTC for thermal machine protection; climate category HFF
British Standards Institution (BSI), temperature differential thermogravimetry
- BS EN ISO 13916:2017 Welding. Measurement of preheating temperature, interpass temperature and preheat maintenance temperature
- BS EN ISO 11409:1998 Plastics - Phenolic resins - Determination of heats and temperatures of reaction by differential scanning calorimetry
- BS ISO 19935-3:2021 Plastics. Temperature modulated DSC. Separation of overlapping thermal transitions
- BS EN ISO 13916:1997 Welding - Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
- BS ISO 11357-2:1999 Plastics - Differential scanning calorimetry (DSC) - Determination of glass transition temperature
- BS ISO 18373-1:2007 Rigid PVC pipes - Differential scanning calorimetry (DSC) method - Measurement of the processing temperature
- BS ISO 22768:2017 Rubber, raw. Determination of the glass transition temperature by differential scanning calorimetry (DSC)
- BS ISO 22768:2006 Rubber, raw - Determination of the glass transition temperature by differential scanning calorimetry (DSC)
- BS EN ISO 1893:2008 Refractory products - Determination of refractoriness under load - Differential method with rising temperature
- BS ISO 24144:2023 Thermal insulation. Test methods for specific heat capacity of thermal insulation for buildings in the high temperature range. Differential scanning calorimetry (DSC) method
- BS EN IEC 60539-2:2019 Directly heated negative temperature coefficient thermistors - Sectional specification. Surface mount negative temperature coefficient thermistors
- BS EN ISO 11357-2:2020 Plastics. Differential scanning calorimetry (DSC) - Determination of glass transition temperature and step height
- 22/30397807 DC BS ISO 24144. Thermal insulation. Test method for Specific heat capacity of thermal insulation for buildings in the high temperature range. DSC method
- BS EN 60539-2:2004 Directly heated negative temperature coefficient thermistors - Sectional specification - Surface mount negative temperature coefficient thermistors
- BS EN 60539-2:2004+A1:2010 Directly heated negative temperature coefficient thermistors. Sectional specification. Surface mount negative temperature coefficient thermistors
- BS EN ISO 11357-3:2013 Plastics. Differential scanning calorimetry (DSC). Determination of temperature and enthalpy of melting and crystallization
- BS EN 60539-1:2002 Directly heated negative temperature coefficient thermistors - Generic specification
- BS EN 60738-1:2006 Thermistors - Directly heated positive temperature coefficient - Part 1: Generic specification
- BS EN 60738-1:2006+A1:2009 Thermistors - Directly heated positive temperature coefficient - Generic specification
- BS EN IEC 60738-1:2022 Thermistors. Directly heated positive temperature coefficient - Generic specification
- BS ISO 21870:2005 Rubber compounding ingredients - Carbon black - Determination of high-temperature loss on heating by thermogravimetry
- BS EN 14597:2012 Temperature control devices and temperature limiters for heat generating systems
- BS EN 14597:2005 Temperature control devices and temperature limiters for heat generating systems
- BS EN ISO 11357-2:2014 Plastics. Differential scanning calorimetry (DSC). Determination of glass transition temperature and glass transition step height
- BS ISO 11357-2:2013 Plastics. Differential scanning calorimetry (DSC). Determination of glass transition temperature and glass transition step height
- BS EN ISO 10211:2009 Thermal bridges in building construction. Heat flows and surface temperatures. Detailed calculations
- BS EN ISO 10211:2007 Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations
- BS EN ISO 22007-3:2012 Plastics. Determination of thermal conductivity and thermal diffusivity. Temperature wave analysis method
- 20/30383740 DC BS ISO 19935-3. Plastics. Temperature modulated DSC. Part 3. Separation of overlapping thermal transitions
- BS ISO 28343:2010 Rubber compounding ingredients. Process oils. Determination of glass transition temperature by DSC
- BS EN 60539-1:2008 Directly heated negative temperature coefficient thermistors. Generic specification
- BS EN 60539-1:2016 Directly heated negative temperature coefficient thermistors. Generic specification
- BS EN ISO 11357-3:2018 Tracked Changes. Plastics. Differential scanning calorimetry (DSC). Determination of temperature and enthalpy of melting and crystallization
- BS ISO 11357-5:1999 Plastics - Differential scanning calorimetry (DSC) - Determination of characteristic reaction-curve temperatures and times, enthalphy of reaction and degree of conversion
- BS ISO 11357-5:2001 Plastics - Differential scanning calorimetry (DSC) - Determination of characteristic reaction-curve temperatures and times, enthalphy of reaction and degree of conversion
- BS ISO 11357-6:2009 Plastics. Differential scanning calorimetry (DSC). Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
- BS ISO 11357-6:2008 Plastics - Differential scanning calorimetry (DSC) - Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
- BS EN ISO 11357-6:2013 Plastics. Differential scanning calorimetry (DSC). Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
- BS 2M 54:1991 Specification for temperature control in the heat treatment of metals
- BS ISO 22768:2020 Raw rubber and rubber latex. Determination of the glass transition temperature by differential scanning calorimetry (DSC)
- 22/30397422 DC BS ISO 24087. Vulcanized rubbers. Differential scanning calorimetry (DSC). Determination of the glass transition temperature and enthalpy
- BS ISO 11357-5:2013 Plastics. Differential scanning calorimetry (DSC). Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
- BS EN ISO 11357-5:2014 Plastics. Differential scanning calorimetry (DSC). Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
Standard Association of Australia （SAA）, temperature differential thermogravimetry
国家能源局, temperature differential thermogravimetry
- NB/T 20493-2018 Identification of thermocouple thermometers important for nuclear power plant safety
- NB/SH/T 0901-2015 Determination of glass transition temperature of mineral oils by differential scanning calorimetry
- SH/T 1799-2016 Determination of glass transition temperature of synthetic rubber latex by Differential Scanning Calorimetry (DSC)
- NB/T 10417-2020 Specifications for installation and acceptance of low ambient temperature air source heat pump hot air fans
NATO - North Atlantic Treaty Organization, temperature differential thermogravimetry
- STANAG 4515-2015 EXPLOSIVES. THERMAL ANALYSIS USING DIFFERENTIAL THERMAL ANALYSIS (DTA). DIFFERENTIAL SCANNING CALORIMETRY (DSC)@ HEAT FLOW CALORIMETRY (HFC)@ AND THERMOGRAVIMETRIC ANALYSIS (TGA) (ED 2)
Professional Standard - Aviation, temperature differential thermogravimetry
- HB 6623.1-1992 Method for Determination of β Transition Temperature of Titanium Alloy Differential Thermal Analysis
Professional Standard - Petrochemical Industry, temperature differential thermogravimetry
- SH/T 0589-1994 Determination of petroleum wax transition temperature (differential scanning calorimetry)
- SH/T 1771-2010 Rubber,raw.Determination of the glass transition temperature by differential scanning calorimetry(DSC)
CEN - European Committee for Standardization, temperature differential thermogravimetry
- EN ISO 13916:2017 Welding - Measurement of preheating temperature@ interpass temperature and preheat maintenance temperature
- EN 14597:2005 Temperature control devices and temperature limiters for heat generating systems
Japanese Industrial Standards Committee (JISC), temperature differential thermogravimetry
- JIS Z 3703:2004 Welding -- Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
- JIS C 2570:1998 Directly heated negative temperature coefficient thermistors
- JIS K 6240:2011 Rubber, raw -- Determination of the glass transition temperature by differential scanning calorimetry (DSC)
- JIS C 1601:1983 Indicating thermoelectric thermometers
- JIS C 2570:1989 General rules for directly heated negative temperature coefficient thermistors
- JIS C 1611:1995 Thermistor for temperature measurement
- JIS B 8413:1994 Temperature limiters and thermostats for hot water boilers
- JIS G 3194:1966 Shape dimensions, weight and tolerance of hot rolled flats steel
- JIS C 2571:1995 Test methods of directly heated negative temperature coefficient thermistors
- JIS C 2570-2:2008 Directly heated negative temperature coefficient thermistors -- Part 2: Sectional specification -- Surface mount negative temperature coefficient thermistors
- JIS C 2570-2:2015 Directly heated negative temperature coefficient thermistors -- Part 2: Sectional specification -- Surface mount negative temperature coefficient thermistors
- JIS C 2570-2:2021 Directly heated negative temperature coefficient thermistors -- Part 2: Sectional specification -- Surface mount negative temperature coefficient thermistors
- JIS H 7851:2015 Test method of cyclic heating for thermal-barrier coatings under temperature gradient
- JIS H 7802:2005 Testing method of ultrafine metal particles for ignition temperature by differential thermal analysis
- JIS H 7851:2005 Testing method for heat resistance under temperature gradient
- JIS K 7193:1999 Plastics -- Determination of ignition temperature using a hot-air furnace
- JIS K 7193:2010 Plastics -- Determination of ignition temperature using a hot-air furnace
- JIS G 3191:1966 Shape, dimensions, weight and tolerance for hot rolled steel bar and bar-in-coil
- JIS C 2570-1:2006 Directly heated negative temperature coefficient thermistors -- Part 1: Generic specification
National Electrical Manufacturers Association（NEMA), temperature differential thermogravimetry
- NEMA LI 6-1993 Relative Temperature Indices of Industrial Thermosetting Laminates (Reaffirm Letter)
ES-UNE, temperature differential thermogravimetry
- UNE-EN ISO 13916:2018 Welding - Measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:2017)
- UNE-EN ISO 11357-3:2018 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization (ISO 11357-3:2018)
- UNE-EN 61074:1993 DETERMINATION OF HEATS AND TEMPERATURES OF MELTING AND CRYSTALLIZATION OF ELECTRICAL INSULATING MATERIALS BY DIFFERENTIAL SCANNING CALORIMETRY. (Endorsed by AENOR in November of 1995.)
- UNE-EN IEC 60539-2:2019 Directly heated negative temperature coefficient thermistors - Part 2: Sectional specification - Surface mount negative temperature coefficient thermistors (Endorsed by Asociación Española de Normalización in November of 2019.)
- UNE-EN ISO 10211:2022 Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations (ISO 10211:2017)
- UNE-EN ISO 11357-2:2021 Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and step height (ISO 11357-2:2020)
European Committee for Standardization (CEN), temperature differential thermogravimetry
- EN ISO 11409:1998 Plastics - Phenolic Resins - Determination of Heats and Temperatures of Reaction by Differential Scanning Calorimetry ISO 11409:1993
- EN ISO 13916:1996 Welding - Guidance on the Measurement of Preheating Temperature, Interpass Temperature and Preheat Maintenance Temperature ISO 13916: 1996
- prEN 61074-1992 Determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry (IEC 1074:1991)
- prEN 32573-1992 Thermal bridges in building construction; heat flows and surface temperatures; general calculation methods
- EN ISO 11357-3:2018 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
- EN ISO 11357-3:2013 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
- EN ISO 11357-2:2020 Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and step height (ISO 11357-2:2020)
- EN ISO 10211:2017 Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations
- EN 14597:2012 Temperature control devices and temperature limiters for heat generating systems
- EN ISO 13123:2011 Metallic and other inorganic coatings - Test method of cyclic heating for thermal-barrier coatings under temperature gradient (ISO 13123:2011)
Lithuanian Standards Office , temperature differential thermogravimetry
- LST EN ISO 13916:1998 Welding - Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:1996)
- LST EN ISO 11409:2000 Plastics - Phenolic resins - Determination of heats and temperatures of reaction by differential scanning calorimetry (ISO 11409:1993)
- LST EN 60539-2-2004 Directly heated negative temperature coefficient thermistors. Part 2: Sectional specification. Surface mount negative temperature coefficient thermistors (IEC 60539-2:2003)
- LST EN 14597-2012 Temperature control devices and temperature limiters for heat generating systems
- LST EN 60539-2-2004/A1-2011 Directly heated negative temperature coefficient thermistors -- Part 2: Sectional specification - Surface mount negative temperature coefficient thermistors (IEC 60539-2:2003/A1:2010)
- LST EN 143004-2001 Blank detail specification. Directly heated negative temperature coefficient thermistors (rod type)
AENOR, temperature differential thermogravimetry
- UNE-EN ISO 13916:1996 Welding - Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:1996)
- UNE-EN ISO 11409:1999 PLASTICS - PHENOLIC RESINS - DETERMINATION OF HEATS AND TEMPERATURES OF REACTION BY DIFFERENTIAL SCANNING CALORIMETRY (ISO 11409:1993)
- UNE-EN 14597:2014 Temperature control devices and temperature limiters for heat generating systems
PL-PKN, temperature differential thermogravimetry
- PN C89431-1993 Plastics. Thermogravimetry of polymers. Temperature scanning method
- PN M53854-08-1992 Electric thermometers Thermometric characteristics for thermocouples Thermocouple Type E (NiCr-CuNi)
- PN M53854-09-1992 Electric thermometers Thermometric characteristics for thermocouples Thermocouple Type N (NiCrSi-NiSi)
AT-ON, temperature differential thermogravimetry
Professional Standard - Commodity Inspection, temperature differential thermogravimetry
- SN/T 2427-2010 Determination of melting temperature and melting temperature range of chemicals for import and export by differential scanning calorimetry
- SN/T 2240-2008 Accelerated storage test,thermal analysis methods for dangerous goods.Differential thermal analysis(DTA)and thermo gravimetric analysis(TGA)
- SN/T 3950-2014 Determination of oxidative onset temperature of hydrocarbons by differential.Scanning calorimetry
- SN/T 3120-2012 Determination of the glass transition temperature of raw rubber.Differential scanning calorimetry (DSC)
Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, temperature differential thermogravimetry
- GJB 5382.11-2005 Test methods of physical parameter for pyrotechnic. Part 11: Determination of Autoignition temperature. DTA and DSC method
Military Standard of the People's Republic of China-General Armament Department, temperature differential thermogravimetry
- GJB 8683.11-2015 Test methods for physical parameters of pyrotechnics Part 11: Determination of spontaneous ignition temperature Differential thermal analysis and differential scanning calorimetry
- GJB 7396-2011 General specification for thermocouple temperature sensors
- GJB 2433A-2011 General specification for thermal resistance temperature sensors
TR-TSE, temperature differential thermogravimetry
ESDU - Engineering Sciences Data Unit, temperature differential thermogravimetry
- ESDU 06018-2007 Temperature measurement: thermocouples.
- ESDU 68023-1978 Thermal conductivity@ viscosity@ heat capacity@ density and Prandtl number of solid@ liquid and gaseous heavy water.
ISA - International Society of Automation, temperature differential thermogravimetry
Professional Standard - Aviation Industry, temperature differential thermogravimetry
International Electrotechnical Commission (IEC), temperature differential thermogravimetry
- IEC TR 61074:1991 Determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry
- IEC 60539:1976 Directly heated negative temperature coefficient thermistors
- IEC 60696:1981 Indirectly heated thermistors with negative temperature coefficient (NTC-I)
- IEC 60539-2:2010 Directly heated negative temperature coefficient thermistors - Part 2: Sectional specification - Surface mount negative temperature coefficient thermistors
- IEC 60539-2:2003 Directly heated negative temperature coefficient thermistors - Part 2: Sectional specification; Surface mount negative temperature coefficient thermistors
- IEC 60539-2:2019 Directly heated negative temperature coefficient thermistors - Part 2: Sectional specification - Surface mount negative temperature coefficient thermistors
- IEC 60539-2:2019 RLV Directly heated negative temperature coefficient thermistors - Part 2: Sectional specification - Surface mount negative temperature coefficient thermistors
- IEC 60539-2:2003+AMD1:2010 CSV Directly heated negative temperature coefficient thermistors - Part 2: Sectional specification - Surface mount negative temperature coefficient thermistors
- IEC GUIDE 117:2010 Electrotechnical equipment - Temperatures of touchable hot surfaces
- IEC 60539-1:2016 Directly heated negative temperature coefficient thermistors - Part 1: Generic specification
- IEC 60539-1:2008 Directly heated negative temperature coefficient thermistors - Part 1: Generic specification
- IEC 60738-1:2006 Thermistors - Directly heated positive temperature coefficient - Part 1: Generic specification
- IEC 60539-1:2002 Directly heated negative temperature coefficient thermistors - Part 1: Generic specification
- IEC 60539-1:2022 Directly heated negative temperature coefficient thermistors - Part 1: Generic specification
工业和信息化部/国家能源局, temperature differential thermogravimetry
- JB/T 13573-2018 Low ambient temperature air source heat pump hot air blower
Professional Standard - Ferrous Metallurgy, temperature differential thermogravimetry
- YB 4022-1991 Test method for load softening temperature of refractory mud (differential-temperature rise method)
- YB/T 370-1995 Test method for refractoriness under load of refractory products (non-differential,with rising temperature)
- YB/T 370-2016 Refractoies.Determination of refractoriness under load (non-differential, with rising temperature)
- YB/T 002-1991 Dimensions, shapes, weights and allowable deviations of hot-rolled billets
- YB/T 2203-1998 Test method for refractoriness under load of castable refractory.Non-differential,with rising temperature
Taiwan Provincial Standard of the People's Republic of China, temperature differential thermogravimetry
- CNS 6018-1984 Indicating Thermoelectric Thermometers
- CNS 8279-1982 Dimensions, Weight and Permissible Variations of Hot Rolled Steel Bars and Bar in Coil
- CNS 6019-1984 Method of Test for Indicating Thermoelectric Thermometers
- CNS 1280-1981 Method of Test for Shrinkage Temperature in Liquid of Leather
Indonesia Standards, temperature differential thermogravimetry
- SNI 3021-1992 Solar energy water heater for domestic use, Direct thermosiphone system with additional heater
European Committee for Electrotechnical Standardization（CENELEC）, temperature differential thermogravimetry
- EN 61074:1993 Determination of Heats and Temperatures of Melting and Crystallization of Electrical Insulating Materials by Differential Scanning Calorimetry (IEC 1074 : 1991)
- EN IEC 60539-2:2019 Directly heated negative temperature coefficient thermistors - Part 2: Sectional specification - Surface mount negative temperature coefficient thermistors
- EN 60539-2:2004 Directly heated negative temperature coefficient thermistors Part 2: Sectional specification - Surface mount negative temperature coefficient thermistors (Incorporates Amendment A1: 2010)
- EN IEC 60539-1:2023 Directly heated negative temperature coefficient thermistors - Part 1: Generic specification
SE-SIS, temperature differential thermogravimetry
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, temperature differential thermogravimetry
- GB/T 702-2017 Hot-rolled steel bars—Dimensions,shape,weight and tolerances
Professional Standard - Agriculture, temperature differential thermogravimetry
- GB 704-1983 Dimensions, shapes, weights and allowable deviations of hot-rolled flat steel
CZ-CSN, temperature differential thermogravimetry
IT-UNI, temperature differential thermogravimetry
RO-ASRO, temperature differential thermogravimetry
- STAS 9486-1979 DIRECTLY HEATED NEGATIVE TEMPERATURE COEF1CIENT THERMISTORS
- STAS 11247/4-1981 Heating plants THERMAL AND HYDRAULICAL CHARACTERISTICS OF THE APPLIANCES Superficial temperature determination
KR-KS, temperature differential thermogravimetry
- KS M ISO 22768-2021 Rubber, raw — Determination of the glass transition temperature by differential scanning calorimetry(DSC)
- KS D 3051-2002(2017)(英文版) Dimensions, weight and tolerances of hot rolled steel bars and bar in coil
- KS M ISO 11357-3-2018 Plastics — Differential scanning calorimetry(DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization
GM Holden Ltd, temperature differential thermogravimetry
Professional Standard - Construction Industry, temperature differential thermogravimetry
- JG/T 362-2012 Heat-allocation device based on temperature determination
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), temperature differential thermogravimetry
- ASHRAE AT-01-10-2-2001 Effect of Tilt Angle and Temperature Difference on Solar Heat Gain Coefficient Measurement of Fenestration System
IN-BIS, temperature differential thermogravimetry
国家质量监督检验检疫总局, temperature differential thermogravimetry
- SN/T 4704-2016 Isothermal detection of kinetic parameters Differential scanning calorimetry
Defense Logistics Agency, temperature differential thermogravimetry
- DLA MIL-PRF-32192/1 (2)-2012 RESISTOR, CHIP, THERMAL (THERMISTOR), POSITIVE TEMPERATURE COEFFICIENT, STYLE RCTP0303
- DLA MIL-PRF-32192/2 (2)-2012 RESISTOR, CHIP, THERMAL (THERMISTOR), INSULATED POSITIVE TEMPERATURE COEFFICIENT STYLE RCTP0805
- DLA MIL-PRF-32192/5 (2)-2012 RESISTOR, CHIP, THERMAL (THERMISTOR), INSULATED NEGATIVE TEMPERATURE COEFFICIENT STYLE RCTN1206
- DLA MIL-PRF-23648/20 C (2)-2012 RESISTOR, THERMAL (THERMISTOR), INSULATED NEGATIVE TEMPERATURE COEFFICIENT STYLE RTH44
CENELEC - European Committee for Electrotechnical Standardization, temperature differential thermogravimetry
- EN 144004:1994 Blank Detail Specification: Directly Heated Positive Temperature Coefficient Thermistors Primarily Intended for Temperature Sensing
European Association of Aerospace Industries, temperature differential thermogravimetry
- AECMA PREN 3877-1997 Aerospace Series Metallic Materials Test Method Determination of Solidus and Liquidus Temperatures by Differential Thermal Analysis of Braze Alloys Edition P 1
- AECMA PREN 3877-1993 Aerospace Series Test Method for Braze Alloys Determination of Solidus and Liquidus Temperatures by Differential Thermal Analysis
HU-MSZT, temperature differential thermogravimetry
FI-SFS, temperature differential thermogravimetry
U.S. Air Force, temperature differential thermogravimetry
Professional Standard - Electron, temperature differential thermogravimetry
- SJ 20722-1998 General specification for temperature transducers for thermal resistance
- SJ 2028.2-1983 Positive temperature coefficient thermistors used for temperature control for Type MZ61
- SJ 2028-1982 Generic specification for directly heated positive temperature coefficient thermistors
- SJ 1558-1980 Indirectly heated negative temperature coefficient thermistors for Type MF41 and MF44
- SJ 1557-1980 General specification for indirectly heated temperature coefficient themistors
GM North America, temperature differential thermogravimetry
Jiangxi Provincial Standard of the People's Republic of China, temperature differential thermogravimetry
- DB36/T 1325-2020 Temperature index of heat damage in cotton flowering and boll stage
Professional Standard - Aerospace, temperature differential thermogravimetry
- QJ/Z 143-1985 Heat Treatment of Magnetic Temperature Compensation Alloy
- QJ 1181.4A-1995 Heat Treatment of Soft Magnetic Alloys Heat Treatment of Magnetic Temperature Compensation Alloys
AT-OVE/ON, temperature differential thermogravimetry
- OVE EN IEC 60539-2:2021 Directly heated negative temperature coefficient thermistors - Part 2: Sectional specification - Surface mount negative temperature coefficient thermistors (german version)
American National Standards Institute （ANSI), temperature differential thermogravimetry
- ANSI/ASTM D4591:2001 Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
- BS ISO 24087:2023 Rubber, vulcanized. Determination of the glass transition temperature and enthalpy by differential scanning calorimetry (British Standard)
National Metrological Verification Regulations of the People's Republic of China, temperature differential thermogravimetry
- JJG 855-1994 Verification Regulation of Digital Calorimetric Thermometer
Society of Automotive Engineers (SAE), temperature differential thermogravimetry
Inner Mongolia Provincial Standard of the People's Republic of China, temperature differential thermogravimetry
国家市场监督管理总局、中国国家标准化管理委员会, temperature differential thermogravimetry
- GB/T 709-2019 Dimension,shape,weight and tolerance for hot-rolled steel strip,plate and sheet
- GB/T 37945-2019 Materials for organic light emitting diode display(OLED)—Test method of glass transfer temperature—Differential scanning calorimetry (DSC)
Professional Standard - Chemical Industry, temperature differential thermogravimetry
- HG/T 4659-2014 Textile dyeing and finishing auxiliaries.Determination of glass transition temperature of the polymer.Differential scanning calorimetry (DSC)