ZH
RU
ES
Thermogravimetry and differential heat
Thermogravimetry and differential heat, Total:499 items.
In the international standard classification, Thermogravimetry and differential heat involves: Thermodynamics and temperature measurements, Education, Iron and steel products, Products of the chemical industry, Pipeline components and pipelines, Burners. Boilers, Physics. Chemistry, Plastics, Machine tools, Linear and angular measurements, Powder metallurgy, Manufacturing forming processes, Surface treatment and coating, Metrology and measurement in general, Testing of metals, Petroleum products in general, Refrigerating technology, Analytical chemistry, Protection against fire, Installations in buildings, Insulating materials, Rails and railway components, Fuels, Materials for the reinforcement of composites, Refractories, Electricity. Magnetism. Electrical and magnetic measurements, Solar energy engineering, Vocabularies, Domestic, commercial and industrial heating appliances, Ceramics, Materials for aerospace construction, Protection of and in buildings, Protection against dangerous goods, Products of non-ferrous metals, Chipless working equipment, Rubber and plastics products, Welding, brazing and soldering, Construction materials, Equipment for the chemical industry, Heat recovery. Thermal insulation, Raw materials for rubber and plastics, Reinforced plastics, Lubricants, industrial oils and related products, Products of the textile industry, Fruits. Vegetables, Ferrous metals, Milk and milk products, Energy and heat transfer engineering in general, Textile fibres, Mining and quarrying, Electrical accessories, Environmental testing, Lifting equipment, Insulating fluids, Cutting tools, Conducting materials, Kitchen equipment, Test conditions and procedures in general, Road vehicles in general, Pulps, Domestic safety, Resistors, Quantities and units, Fasteners.
Professional Standard - Machinery, Thermogravimetry and differential heat
- JB/T 6856-1993 Thermogravimetry-differential thermal analyzer
- JB/T 6856-2017 Thermogravimetric-Differential Thermal Analyzer
- JB/T 10478-2004 Machining allowance & tolerance for rolled ring
- JB/T 9369-1999 Differential thermal analyzer
- JB/T 9369-2017 Differential Thermal Analyzer
- JB/T 8630-1997 Test method of determining melting heat, melting point and crystallization heat and crystallizing point of electrical insulation materials with differential scanning calorimetric method
- JB/T 6211-2013 Switches for electric blankets and similar appliances
- JB/T 10045.3-1999 Thermal cutting.Quality and demensional deviation in the gas cutting
Professional Standard - Education, Thermogravimetry and differential heat
- JY/T 0589.5-2020 General Principles of Thermal Analysis Methods Part 5: Thermogravimetric-Differential Thermal Analysis and Thermogravimetric-Differential Scanning Calorimetry
- JY/T 0589.2-2020 General Principles of Thermal Analysis Methods Part 2: Differential Thermal Analysis
- JY/T 0589.4-2020 General Principles of Thermal Analysis Methods Part 4: Thermogravimetry
- JY/T 0589.3-2020 General Principles of Thermal Analysis Methods Part 3: Differential Scanning Calorimetry
Korean Agency for Technology and Standards (KATS), Thermogravimetry and differential heat
- KS D 3502-2013 Dimensions, mass and permissible variations of hot rolled steel sections
- KS D 3052-2002 Shape, dimensions, weight and tolerances of hot-rolled steel flats
- KS D 3052-2002(2017) Shape, dimensions, weight and tolerances of hot-rolled steel flats
- KS D 3052-1986 Shape, dimensions, weight and tolerances of hot-rolled steel flats
- KS D 3051-2002 Dimensions, weight and tolerances of hot rolled steel bars and bar in coil
- KS D 3500-2003 Dimensions, weight and permissible variations of hot rolled steel plates, sheets and strip
- KS D 3502-2015 Dimensions, mass and permissible variations of hot rolled steel sections
- KS D 3052-2002(2022) Shape, dimensions, weight and tolerances of hot-rolled steel flats
- KS D 3051-2002(2022) Dimensions, weight and tolerances of hot rolled steel bars and bar in coil
- KS D 3502-2016 Dimensions, mass and permissible variations of hot rolled steel sections
- KS D 3502-1986 Dimensions, mass and permissible variations of hot rolled steel sections
- KS D ISO 1129:2005 Steel tubes for boilers, superheaters and heat exchangers-Dimensions, tolerances and conventional masses per unit length
- KS M ISO 11409:2006 Plastics－Phenolic resins－Determination of heats and temperatures of reaction by differential scanning calorimetry
- KS B 0426-1978 Dimensional Tolerance for Steel Die Forgings (Hammer and press forging)
- KS B 0426-2014 Dimensional tolerance for steel die forgings(Hammer and press forging)
- KS D 3051-2002(2017) Dimensions, weight and tolerances of hot rolled steel bars and bar in coil
- KS D 3502-2021 Dimensions, mass and permissible variations of hot rolled steel sections
- KS D ISO 9442:2005 Steel-Hot-rolled ribbed and grooved flats for spring leaves-Tolerances and dimensions
- KS D ISO 9442:2013 Steel－Hot-rolled ribbed and grooved flats for spring leaves－Tolerances and dimensions
- KS B 0427-2014 Dimensional tolerance for steel die forgings(upsetting)
- KS C IEC 60584-2:2004 Thermocouples-Part 2:Tolerances
- KS B 0427-1978 Dimensional Tolerance for Steel Die Forgings(Upsetting)
- KS C IEC 60584-2-2004(2009) Thermocouples－Part 2：Tolerances
- KS C IEC 60584-2:2013 Thermocouples-Part 2:Tolerances
- KS D ISO 16163:2004 Continuously hot-dipped coated steel sheet products-Dimensional and shape tolerances
- KS D ISO 16163:2015 Continuously hot-dipped coated steel sheet products-Dimensional and shape tolerances
- KS C 9805-2013 Electric storage water boilers for household purposes and storage tank water heaters
- KS M ISO 11357-4:2012 Plastics-Differential scanning calorimetry(DSC)-Part 4:Determination of specific heat capacity
- KS M ISO 11357-4:2016 Plastics－Differential scanning calorimetry(DSC)－Part 4：Determination of specific heat capacity
- KS L ISO 8301:2006 Thermal insulation－Determination of steady-state thermal resistance and related properties－Heat flow meter apparatus
- KS C 2002-1998 Test method of thermal life evaluation of plastics by thermogravimetry
- KS M ISO 21870-2007(2017) Rubber compounding ingredients－Carbon black－Determination of high－temperature loss on heating by thermogravimetry
- KS M ISO 21870-2007(2022) Rubber compounding ingredients－Carbon black－Determination of high－temperature loss on heating by thermogravimetry
- KS M ISO 11357-4-2016(2021) Plastics－Differential scanning calorimetry(DSC)－Part 4：Determination of specific heat capacity
- KS B 6405-2009(2019) Valves and fitting for radiator
- KS B 6405-1988 Valves and fitting for radiator
- KS B 6405-1985 Valves and fitting for radiator
- KS L ISO 8302:2006 Thermal insulation－Determination of steady-state thermal resistance and related properties－Guarded hot plate apparatus
- KS M 3048-1990(2001) TESTING METHODS OF PLASTICS BY THERMOGRAVIMETRY
- KS D ISO 14923-2013(2018) Trermal spraying — Characterization and test of thermally sprayed coatings
- KS L ISO 8301-2006(2016) Thermal insulation－Determination of steady-state thermal resistance and related properties－Heat flow meter apparatus
- KS C 9309-2013 Electric pots and water heaters
- KS C 2601-A-2014 Wires and rolled wires for electrical heating
- KS C 2601-1987 Wires and Rolled Wires for Electrieal Heating
- KS D ISO 18286-2005(2010) Hot-rolled stainless steel plates－Tolerances on dimensions and shape
- KS L ISO 8302-2006(2016) Thermal insulation－Determination of steady-state thermal resistance and related properties－Guarded hot plate apparatus
- KS L ISO 8302-2006(2021) Thermal insulation－Determination of steady-state thermal resistance and related properties－Guarded hot plate apparatus
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Thermogravimetry and differential heat
- GB/T 704-1988 Dimensions, shape, weight and tolerances for hot-rolled flats
- GB/T 14981-1994 Dimenisions shape weight and tolerances for hot-rolled wire rods
- GB/T 707-1988 Hot-rolled channel steel--Dimensions,shape,weight and tolerances
- GB/T 14981-2004 Dimenisions,shape,mass and tolerances for hot-rolled wire rods
- GB/T 702-2008 Dimensions, shapes, weights and allowable deviations of hot-rolled steel bars
- GB 707-1988 Dimensions, shapes, weights and allowable deviations of hot-rolled channel steel
- GB/T 9946-1988 Dimensions,shape,weight and tolerances for hot-rolled L-sectional steel
- GB/T 706-1988 Hot-rolled beam steel--Dimensions,shape,weight and tolerances
- GB/T 14981-2009 Dimension,shape,mass and tolerance for hot-rolled round wire rod
- GB/T 9787-1988 Hot-rolled equal-leg angle steel--Dimensions,shape,weight and tolerances
- GB/T 709-2019(英文版) "Dimension,shape,weight and tolerance for hot rolled steel strip,plate and sheet"
- GB/T 702-1986 Hot-rolled round and square steels--Dimension,shape,weight and tolerance
- GB/T 9788-1988 Hot-rolled unequal-leg angle steel--Dimensions,shape,weight and tolerances
- GB/T 702-2004 Hot-rolled round and square steel bars-Dimension,Shape,weight and tolerance
- GB 702-1986 Hot-rolled round and square steels—Dimension, shape, weight and tolerance
- GB/T 911-2004 Dimensions,shapes,weight and tolerances for hot-rolled tool flat steels
- GB/T 709-1988 Dimensions, shape, weight and tolerances for hot-rolled plates and sheets
- GB/T 709-2006 Dimension, shape, weight and tolerances for hot-rolled steel plates and sheets
- GB/T 705-1989 Hot-rolled hexagonal and octagonal steel bars--Dimensions, shape, weight and tolerance
- GB/T 19469-2004 Determination of ignition temperature of pyrotechnic composition-DTA-TG analysis
- GB/T 41763-2022 Dimension, shape, weight and tolerance for twin-roll casting thin gauge hot-rolled steel strip and sheet
- GB/T 25052-2010 Continuously hot-dip coated steel sheet and strip.Tolerances on dimensions,shape and weight
- GB/T 15814.3-1995 Reagent of fireworks and firecrackers--Thermal compatibility test--Method of DTA and DSC
- GB/T 19466.3-2004 Plastics-Differential scanning calorimetry(DSC)-Part 3:Determination of temperature and enthalpy of melting and crystallization
- GB/T 14812-1993 The testing method of heat transfer performance for gravity heat pipe
- GB/T 29189-2012 Thermo gravimetric analysis(TGA) for determination of oxidation temperature and ash content of carbon nanotubes
- GB/T 16839.2-1997 Thermocouples--Part 2: Tolerances
- GB/T 24767-2009 The gravity heat pipe for solar application
- GB/T 6297-2002 Standard test method for differential thermal analysis of row materials of ceramic
- GB/T 22232-2008 Test method for the thermal stability of chemicals by differential scanning calorimetry
- GB/T 9082.2-1988 Wickless aluminium gravity heat pipes
- GB/T 14837-1993 Rubber and rubber products.Determination of composition by thermogravimetry
- GB/T 708-2019(英文版) Dimension，shape，weight and tolerance for coldrolled steel strip and sheet
- GB/T 17594-1998 Textile material--Test method for themotransition temperature--Differential scanning calorimetry (DSC)
- GB/T 16761-1997 Dimensions,shape,weight and tolerances for forged flats
- GB/T 17395-1998 Dimensions, shapes, masses and tolerances of seamless steel tubes
- GB/T 908-2008 Forged bars.Dimensions,shape,weight and tolerances
- GB/T 17395-2008 Dimensions, shapes, masses and tolerances of seamless steel tubes
- GB/T 18404-2022 Mineral insulated metal-sheathed thermocouple cables and thermocouples
- GB/T 18404-2001 Mineral insulated thermocouple cables and thermocouples
- GB/T 30435-2013 Electric gravity convection and forced ventilation ovens
- GB/T 9082.1-1988 Aluminium tubes used for wickless gravity heat pipes
- GB/T 10820-2002 Thermal efficiency and test methods of boilers for daily life
- GB/T 10820-2011 Thermal efficiency and test methods of boilers for daily life
- GB/T 10295-1988 Thermal insulation--Determination of steady-state thermal resistance and related properties--Heat flow meter apparatus
- GB/T 10295-2008 Thermal insulation.Determination of steady-state thermal resistance and related properties.Heat flow meter apparatus
- GB/T 3103.4-1992 Tolerances for fasteners.Components for bolted connections made mainly from materials with a high temperture strength
- GB/T 17357-1998 In-situ measurements of heat loss in thermal insulation of equipments and pipes--Heat flow meter apparatus
- GB/T 10294-1988 Thermal insulation--Determination of steady-state thermal resistance and related properties--Guarded hot plate apparatus
- GB/T 10294-2008 Thermal insulation.Determination of steady-state thermal resistance and related properties.Guarded hot plate apparatus
- GB/T 27761-2011 Standard test method of mass loss and residue measurement validation of thermogravimetric analyzers
- GB/T 2061-2013 Foil of copper and copper alloys for heat-exchanger fin
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Thermogravimetry and differential heat
- GB/T 702-2017 Hot-rolled steel bars—Dimensions,shape,weight and tolerances
- GB/T 19466.4-2016 Plastics—Differential scanning calorimetry （DSC）—Part 4: Determination of specific heat capacity
- GB/T 34445-2017 Test method of hot-tack property for heat sealing surfaces of thermoplastic polymer and thermoplastic composite material
Professional Standard - Agriculture, Thermogravimetry and differential heat
- GB 704-1983 Dimensions, shapes, weights and allowable deviations of hot-rolled flat steel
Professional Standard - Ferrous Metallurgy, Thermogravimetry and differential heat
- YB/T 002-1991 Dimensions, shapes, weights and allowable deviations of hot-rolled billets
- YB/T 001-1991 Bloom size, shape, weight and tolerance
Japanese Industrial Standards Committee (JISC), Thermogravimetry and differential heat
- JIS G 3194:1966 Shape dimensions, weight and tolerance of hot rolled flats steel
- JIS G 3191:1966 Shape, dimensions, weight and tolerance for hot rolled steel bar and bar-in-coil
- JIS G 3191:2002 Dimensions, mass and permissible variations of hot rolled steel bars and bar in coil
- JIS G 3191:2012 Dimensions, mass and permissible variations of hot rolled steel bars and bar in coil
- JIS G 3192:2005 Dimensions, mass and permissible variations of hot rolled steel sections
- JIS G 3192:2008 Dimensions, mass and permissible variations of hot rolled steel sections
- JIS G 3193:1990 Dimensions, mass and permissible variations of hot rolled steel plates, sheets and strip
- JIS G 3193:2005 Dimensions, mass and permissible variations of hot rolled steel plates, sheets and strips
- JIS G 3193:2008 Dimensions, mass and permissible variations of hot rolled steel plates, sheets and strips
- JIS G 3192:1994 Dimensions, mass and permissible variations of hot rolled steel sections
- JIS G 3192:2014 Dimensions, mass and permissible variations of hot rolled steel sections
- JIS G 3193:2019 Dimensions, shape, mass and permissible variations of hot rolled steel plates, sheets and strips
- JIS G 3192:2021 Dimensions, shape, mass and permissible variations of hot rolled steel sections
- JIS R 2614:1985 Testing method for specific gravity and true porosity of insulating fire bricks
North Atlantic Treaty Organization Standards Agency, Thermogravimetry and differential heat
- STANAG 4515-2002 EXPLOSIVES: THERMAL CHARACTERIZATION BY DIFFERENTIAL THERMAL ANALYSIS, DIFFERENTIAL SCANNING CALORIMETRY AND THERMOGRAVIMETRIC ANALYSIS
NATO - North Atlantic Treaty Organization, Thermogravimetry and differential heat
- STANAG 4515-2015 EXPLOSIVES. THERMAL ANALYSIS USING DIFFERENTIAL THERMAL ANALYSIS (DTA). DIFFERENTIAL SCANNING CALORIMETRY (DSC)@ HEAT FLOW CALORIMETRY (HFC)@ AND THERMOGRAVIMETRIC ANALYSIS (TGA) (ED 2)
国家市场监督管理总局、中国国家标准化管理委员会, Thermogravimetry and differential heat
- GB/T 709-2019 Dimension,shape,weight and tolerance for hot-rolled steel strip,plate and sheet
- GB/T 908-2019 Forged bars for dimensions,shape,weight and tolerances
- GB/T 39799-2021 Dimension,shape,weight and tolerances for titanium and titanium alloy bars and wires
Professional Standard - Commodity Inspection, Thermogravimetry and differential heat
- SN/T 2240-2008 Accelerated storage test,thermal analysis methods for dangerous goods.Differential thermal analysis(DTA)and thermo gravimetric analysis(TGA)
- SN/T 2942-2011 Assessment of thermal oxidation stability of plastics.Differential scanning calorimetry
CZ-CSN, Thermogravimetry and differential heat
- CSN 01 4252-1971 Devitation for dimensions without speci-tied tolerances of steel pressings, hot-cut and hot-flat-formed
- CSN 30 4152-1966 Heater plugs double pole, conic seal
- CSN 42 8520-1966 Copper and copper alloy hot-pressed square bars, tolerances j 16. Dimensions
- CSN 42 8524-1966 Copper and copper alloy hot-pressed flat bars, tolerances j 15. Dimensions
- CSN IEC 584-3:1993 Thermocouples. Part 3: Extension and compensating cables. Tolerances and identification system
- CSN IEC 584-2:1994 Thermocouples. Part 2: Tolerances
- CSN 42 8525-1966 Copper hot-pressed flat bars, tolerances j 16. Dimensions
- CSN 42 8609-1992 Oxygen-free copper bars. Dimensions
- CSN 06 3010-1995 Thermal balances of fuel industrial furnaces for heating and heat treatment of metals
- CSN 42 5716-1981 Hot forming seamless steel tubes with smaller tolerances. Dimensions
Taiwan Provincial Standard of the People's Republic of China, Thermogravimetry and differential heat
- CNS 8279-1982 Dimensions, Weight and Permissible Variations of Hot Rolled Steel Bars and Bar in Coil
- CNS 1490-2006 Dimensions, mass and permissible variations of hot rolled steel sections
- CNS 1490-2000 Dimensions,mass and permissible variations of hot rolled steel sections
- CNS 8278-2001 Dimensions,mass and permissible variations of hot rolled flat steel
- CNS 11738-1986 Method of Test for Specific Gravity and True Porosity of Insulating Fire Bricks
- CNS 3013-1993 Dimensions, Mass and Permissible Variations of Hot Rolled Steel Plates, Sheets and Strips
- CNS 11296-4-1985 Quantities and Units of Heat
- CNS 11296.4-1985 Quantities and Units of Heat
- CNS 9610-1998 Heat-resisting plates and sheets
PT-IPQ, Thermogravimetry and differential heat
International Organization for Standardization (ISO), Thermogravimetry and differential heat
- ISO 1129:1977 Title missing - Legacy paper document
- ISO 1129:1980 Steel tubes for boilers, superheaters and heat exchangers; Dimensions, tolerances and conventional masses per unit length
- ISO 16160:2000 Continuously hot-rolled steel sheet products - Dimensional and shape tolerances
- ISO 11409:1993 Plastics; phenolic resins; determination of heats and temperatures of reaction by differential scanning calorimetry
- ISO 14920:1999 Thermal spraying - Spraying and fusing of self-fluxing alloys
- ISO 14920:2015 Thermal spraying - Spraying and fusing of self-fluxing alloys
- ISO 16160:2005 Continuously hot-rolled steel sheet products - Dimensional and shape tolerances
- ISO 9442:1988 Steel; hot-rolled ribbed and grooved flats for spring leaves; tolerances and dimensions
- ISO 16163:2005 Continuously hot-dipped coated steel sheet products - Dimensional and shape tolerances
- ISO 16163:2010 Continuously hot-dipped coated steel sheet products —Dimensional and shape tolerances
- ISO 16163:2000 Continuously hot-dipped coated steel sheet products - Dimensional and shape tolerances
- ISO 16163:2012 Continuously hot-dipped coated steel sheet products - Dimensional and shape tolerances
- ISO 23976:2021 Plastics - Fast differential scanning calorimetry (FSC) - Chip calorimetry
- ISO 9013:2017 Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances
- ISO 24144:2023 Thermal insulation — Test methods for specific heat capacity of thermal insulation for buildings in the high temperature range — Differential scanning calorimetry (DSC) method
- ISO 8301:1991 Thermal insulation; determination of steady-state thermal resistance and related properties; heat flow meter apparatus
- ISO 11357-4:2005 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity
- ISO 11357-4:2014 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity
- ISO 11357-8:2021 Plastics - Differential scanning calorimetry (DSC) - Part 8: Determination of thermal conductivity
- ISO 11357-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity
- ISO 8302:1991 Thermal insulation; determination of steady-state thermal resistance and related properties; guarded hot plate apparatus
- ISO 9013:2002 Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances
- ISO/CD 22207:1980 Kraft lignin - Determination of thermal stability by Thermogravimetry
- ISO/DIS 22207:2023 Kraft lignin — Determination of thermal stability by Thermogravimetry
- ISO 7452:2002 Hot-rolled structural steel plates - Tolerances on dimensions and shape
- ISO 18286:2004 Hot-rolled stainless steel plates - Tolerances on dimensions and shape
- ISO 7452:1984 Hot-rolled structural steel plates; Tolerances on dimensions and shape
- ISO 1035-4:1982 Hot-rolled steel bars; Part 4 : Tolerances
Group Standards of the People's Republic of China, Thermogravimetry and differential heat
- T/CIESC 0002-2020 Standard Practice for Evaluation of Methods for Determination of Kinetic Parameters by Calorimetry and Differential Scanning Calorimetry
- T/CMTBA 1002.2-2019 Heavy-duty machine tools—Tests—Part 2:technical guide to the ram thermal deflection test and error compensation
- T/CIE 082-2020 Method for detecting temperature difference of thermal insulation coating
- T/CSEE 0073-2018 Thermogravimetric test and evaluation method of combustion performance of power coal
- T/CTES 1019-2019 Determination of Silk Weighting Agent Content by Thermogravimetric Method
- T/SSEA 0240-2022 Hot rolled angle steel for tower crane
- T/CECS 10007-2018 Burner for combiboiler and water heater
Association Francaise de Normalisation, Thermogravimetry and differential heat
- NF EN ISO 11357-3:2018 Plastiques - Analyse calorimétrique différentielle (DSC) - Partie 3 : détermination de la température et de l'enthalpie de fusion et de cristallisation
- NF A45-011*NF EN 10067:1996 Hot-rolled bulb flats. Dimensions and tolerances on shape, dimensions and mass.
- NF A45-004*NF EN 10059:2004 Hot rolled square steel bars for general purposes - Dimensions and tolerances on shape and dimensions
- NF EN 10059:2004 Carrés en acier laminés à chaud pour usages généraux - Dimensions et tolérances sur la forme et les dimensions
- NF A45-314:1982 Iron and steel. Hot-rolled products. Vignole type 50 kg/m rail with fish-plate. Characteristics and tolerances.
- NF A45-315:1982 Iron and steel. Hot-rolled products. Vignole type 52 kg/m rail with fish-plate. Characteristics and tolerances.
- NF A45-317:1982 Iron and steel. Hot-rolled products. Vignole type 60 kg/m rail with fish-plate. Characteristics and tolerances.
- NF EN ISO 11357-4:2021 Plastiques - Analyse calorimétrique différentielle (DSC) - Partie 4 : détermination de la capacité thermique massique
- NF C42-322:1993 Thermocouples. Part 2 : tolerances.
- NF EN 10055:1996 Fers T en acier à ailes égales et à coins arrondis laminés à chaud - Dimensions et tolérances sur la forme et les dimensions
- NF A50-462:1996 Aluminium and aluminium alloys. Finstock. Part 3 : tolerances on dimensions and form.
- NF A87-000:2003 Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances.
- NF A87-000*NF EN ISO 9013:2017 Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances
- NF T51-507-4:2013 Plastics - Differential scanning calorimetry (DSC) - Part 4: determination of specific heat capacity
- NF T51-507-4:2014 Plastics - Differential scanning calorimetry (DSC) - Part 4 : determination of specific heat capacity
- NF T51-507-8:2021 Plastics - Differential scanning calorimetry (DSC) - Part 8 : determination of thermal conductivity
- NF T51-507-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4 : determination of specific heat capacity
- NF EN ISO 9013:2017 Coupage thermique - Classification des coupes thermiques - Spécification géométrique des produits et tolérances relatives à la qualité
- NF L17-451:1988 Aéronautique et espace - Préimprégnés de résine thermodurcissable - Analyse thermique différentielle - Méthode d'essai.
- NF A46-101*NF EN 10048:1996 Hot rolled narrow steel strip. Tolerances on dimensions and shape.
- NF T51-403*NF EN ISO 11409:1998 Plastics. Phenolic resins. Determination of heats and temperatures of reaction by differential scanning calorimetry.
- NF EN ISO 11357-8:2021 Plastiques - Analyse calorimétrique différentielle (DSC) - Partie 8 : détermination de la conductivité thermique
- NF A87-000/A1:2004 Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances.
- NF EN ISO 18286:2010 Tôles en acier inoxydable laminées à chaud - Tolérances sur les dimensions et la forme
- NF EN 10060:2004 Ronds laminés à chaud - Dimensions et tolérances sur la forme et les dimensions
German Institute for Standardization, Thermogravimetry and differential heat
- DIN 51007-2:2021 Thermal analysis - Differential thermal analysis (DTA) and Differential scanning calorimetry (DSC) - Part 2: Fast differential scanning calorimetry (f-DSC); Chip calorimetry
- DIN 51007-2:2021-10 Thermal analysis - Differential thermal analysis (DTA) and Differential scanning calorimetry (DSC) - Part 2: Fast differential scanning calorimetry (f-DSC); Chip calorimetry
- DIN 51007:2019 Thermal analysis - Differential thermal analysis (DTA) and differential scanning calorimetry (DSC) - General Principles
- DIN 51007:2019-04 Thermal analysis - Differential thermal analysis (DTA) and differential scanning calorimetry (DSC) - General Principles
- DIN EN 10060:2004-02 Hot rolled round steel bars - Dimensions and tolerances on shape and dimensions; German version EN 10060:2003
- DIN IEC 60584-2:1992 Thermocouples; tolerances; identical with IEC 60584-2:1982 (status of 1989); german version HD 446.2 S2:1990
- DIN 51006:2023-03 Thermal analysis - Thermogravimetry - Principles / Note: Date of issue 2023-01-27*Intended as replacement for DIN 51006 (2005-07).
- DIN 51007-1:2023-07 Thermal analysis - Differential thermal analysis (DTA) and differential scanning calorimetry (DSC) - Part 1: General principles / Note: Date of issue 2023-05-26*Intended as replacement for DIN 51007 (2019-04).
- DIN 51007:1994 Thermal analysis; differential thermal analysis; principles
- DIN EN 10061:2004-02 Hot rolled hexagon steel bars - Dimensions and tolerances on shape and dimensions; German version EN 10061:2003
- DIN 1027:2004 Steel bars - Hot-rolled zees with round edges - Dimensions, masses, tolerances, static values
- DIN 51006:2005-07 Thermal analysis (TA) - Thermogravimetry (TG) - Principles / Note: To be replaced by DIN 51006 (2023-03) (in preparation).
- DIN 1022:2004 Steel bars - Hot-rolled square root equal angles (LS-steel) - Dimensions, masses and tolerances
- DIN EN 10029:2011-02 Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape; German version EN 10029:2010
- DIN EN 10059:2004-02 Hot rolled square steel bars for general purposes - Dimensions and tolerances on shape and dimensions; German version EN 10059:2003
- DIN 28008:2010-02 Tolerances for tubular heat exchangers
- DIN EN 10058:2004 Hot rolled flat steel bars for general purposes - Dimensions and tolerances on shape and dimensions; German version EN 10058:2003
- DIN EN 10060:2004 Hot rolled round steel bars - Dimensions and tolerances on shape and dimensions; German version EN 10060:2003
- DIN EN 60584-2:1994 Thermocouples - Part 2: Tolerances (IEC 60584-2:1982 + A1:1989); German version EN 60584-2:1993
- DIN 51006:2005 Thermal analysis (TA) - Thermogravimetry (TG) - Principles
- DIN EN 10061:2004 Hot rolled hexagon steel bars - Dimensions and tolerances on shape and dimensions; German version EN 10061:2003
- DIN EN 10059:2004 Hot rolled square steel bars for general purposes - Dimensions and tolerances on shape and dimensions; German version EN 10059:2003
- DIN 59220:2000 Flat products of steel - Hot rolled patterned plate - Dimensions, mass, tolerances on dimensions, shape and mass
- DIN 59740:2004 Sheets of wrought nickel and wrought nickel alloys, hot rolled - Dimensions and tolerances on dimensions and form
- DIN 59780:2008 Round wire of wrought nickel and wrought nickel alloys, hot rolled - Dimensions and tolerances on dimensions and form
- DIN EN 10058:2019-02 Hot rolled flat steel bars and steel wide flats for general purposes - Dimensions and tolerances on shape and dimensions; German version EN 10058:2018
- DIN 59763:2006-09 Rectangular bars of wrought nickel and nickel alloys, hot rolled - Dimensions and tolerances on dimensions and form
- DIN 28008:2010 Tolerances for tubular heat exchangers
- DIN 28008:1983 Tolerances for construction of tubular heat exchangers
- DIN 10290:1981 Thermohydrometer for the density measurement of milk and skim-milk
- DIN EN 10092-1:2004-01 Hot rolled spring steel flat bars - Part 1: Flat bars - Dimensions and tolerances on shape and dimensions; German version EN 10092-1:2003
- DIN EN 10048:1996-10 Hot-rolled narrow steel strip - Tolerances on dimensions and shape; German version EN 10048:1996
- DIN EN ISO 9013:2003 Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2002); German version EN ISO 9013:2002
- DIN EN ISO 11409:1998 Plastics - Phenolic resins - Determination of heats and temperatures of reaction by differential scanning calorimetry (ISO 11409:1993); German version EN ISO 11409:1998
- DIN EN ISO 9013:2017 Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2017)
- DIN EN 12667:2001-05 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance; German version EN 12667:2001
- DIN EN 10279:2000-03 Hot rolled steel channels - Tolerances on shape, dimensions and mass; German version EN 10279:2000
- DIN EN 60584-1 Berichtigung 1:2015-08 Thermocouples - Part 1: EMF specifications and tolerances (IEC 60584-1:2013); German version EN 60584-1:2013, Corrigendum to DIN EN 60584-1:2014-07
- DIN EN 60584-1:2014-07 Thermocouples - Part 1: EMF specifications and tolerances (IEC 60584-1:2013); German version EN 60584-1:2013 / Note: DIN EN 60584-1 (1996-10), DIN EN 60584-1 Berichtigung 1 (1998-06) and DIN EN 60584-2 (1994-10) remain valid alongside this standard unt...
- DIN EN ISO 18286:2010-11 Hot-rolled stainless steel plates - Tolerances on dimensions and shape (ISO 18286:2008); German version EN ISO 18286:2010
- DIN EN ISO 8990:1996 Thermal insulation - Determination of steady-state thermal transmission properties - Calibrated and guarded hot box (ISO 8990:1994); German version EN ISO 8990:1996
YU-JUS, Thermogravimetry and differential heat
- JUS L.F2.001-1995 Industrial-process measurement and control - Thermocouples - Tolerances
- JUS M.E5.121-1991 Tubular heat exchangers -Tolerances for construction
- JUS L.F2.013-1995 Measurement of temperature in industrial process - Extension and compensating cables for thermocouples - Tolerances and identification system
KR-KS, Thermogravimetry and differential heat
British Standards Institution (BSI), Thermogravimetry and differential heat
- BS EN 60584-2:1993 Thermocouples - Tolerances
- BS EN 10067:1997 Hot rolled bulb flats - Dimensions and tolerances on shape, dimensions and mass
- BS EN 10060:2003 Hot rolled round steel bars for general purposes - Dimensions and tolerances on shape and dimensions
- BS EN 10058:2003 Hot rolled flat steel bars for general purposes - Dimensions and tolerances on shape and dimensions
- BS EN ISO 11357-4:2013 Plastics - Differential scanning calorimetry (DSC) - Determination of specific heat capacity
- BS EN ISO 11357-4:2014 Plastics. Differential scanning calorimetry (DSC). Determination of specific heat capacity
- BS EN ISO 11357-4:2021 Plastics. Differential scanning calorimetry (DSC). Determination of specific heat capacity
- BS EN 10061:2003 Hot rolled hexagon steel bars for general purposes - Dimensions and tolerances on shape and dimensions
- BS EN 10059:2003 Hot rolled square steel bars for general purposes - Dimensions and tolerances on shape and dimensions
- BS EN 10061:2003(2008) Hot rolled hexagon steel bars for general purposes - Dimensions and tolerances on shape and dimensions
- BS ISO 23976:2021 Plastics. Fast differential scanning calorimetry (FSC). Chip calorimetry
- BS ISO 24144:2023 Thermal insulation. Test methods for specific heat capacity of thermal insulation for buildings in the high temperature range. Differential scanning calorimetry (DSC) method
- BS EN 10092-1:2003 Hot rolled spring steel flat bars - Flat bars - Dimensions and tolerances on shape and dimensions
- BS EN 10092-1:2007 Hot rolled spring steel flat bars - Flat bars - Dimensions and tolerances on shape and dimensions
- 22/30397807 DC BS ISO 24144. Thermal insulation. Test method for Specific heat capacity of thermal insulation for buildings in the high temperature range. DSC method
- 20/30396016 DC BS ISO 23976. Plastics. Fast differential scanning calorimetry. Chip calorimetry
- BS EN ISO 11357-8:2021 Plastics. Differential scanning calorimetry (DSC). Determination of thermal conductivity
- BS ISO 12488-4:2004 Cranes - Tolerances for wheels and travel and traversing tracks - Jib cranes
- BS EN 10279:2000 Hot rolled steel channels - Tolerances on shape, dimension and mass
- BS EN 10048:1997 Hot rolled narrow steel strip - Tolerances on dimensions and shape
- BS EN 10048:1997(1998) Hot rolled narrow steel strip - Tolerances on dimensions and shape
- BS EN 60584-1:2013 Thermocouples. EMF specifications and tolerances
AWS - American Welding Society, Thermogravimetry and differential heat
- C4.6M-2006 Thermal Cutting Classification of Thermal Cuts Geometric Product Specification and Quality Tolerances (First Edition)
RU-GOST R, Thermogravimetry and differential heat
- GOST R 8.728-2010 State system for ensuring the uniformity of measurements. Estimation of errors of measurements of thermal energy and weight of the heat-carrier of water systems of the heat supply
- GOST R 56724-2015 Plastics. Differential scanning calorimetry (DSC). Part 3. Determination of temperature and enthalpy of melting and crystallization
- GOST R 56754-2015 Plastics. Differential scanning calorimetry (DSC). Part 4. Determination of specific heat capacity
- GOST R 57952-2017 Fluoropolymers. Determining temperatures and heat of transition by differential scanning calorimetry
- GOST 25493-1982 Rocks. Method for determination of specific heat and temperature conductivity coefficient
- GOST 20329-1974 Cutting off saws for cutting thermosetting plastics and thermoplasts. Specifications
- GOST 28398-1989 Household electric cooking ranges, cooking plates and cooking ovens. Methods for measuring the performance
SE-SIS, Thermogravimetry and differential heat
BE-NBN, Thermogravimetry and differential heat
American Society for Testing and Materials (ASTM), Thermogravimetry and differential heat
- ASTM E967-97 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
- ASTM E968-99 Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters
- ASTM D3588-98 Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels
- ASTM D3588-98(2003) Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels
- ASTM E967-03 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
- ASTM E967-08 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
- ASTM E967-18 Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
- ASTM E967-08(2014) Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
- ASTM E2550-17 Standard Test Method for Thermal Stability by Thermogravimetry
- ASTM E968-02(2008) Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters
- ASTM E1356-98 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry or Differential Thermal Analysis
- ASTM E2160-04(2018) Standard Test Method for Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry
- ASTM E2160-23 Standard Test Method for Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry
- ASTM E968-02 Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters
- ASTM E968-02(2014) Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters
- ASTM E2160-01 Standard Test Method for Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry
- ASTM E2160-04 Standard Test Method for Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry
- ASTM E2160-04(2012) Standard Test Method for Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry
- ASTM E1269-11 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
- ASTM E537-98 Standard Test Method for Assessing the Thermal Stability of Chemicals By Methods of Thermal Analysis
- ASTM E1269-11(2018) Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
- ASTM E1877-17 Standard Practice for Calculating Thermal Endurance of Materials from Thermogravimetric Decomposition Data
- ASTM E1877-00 Standard Practice for Calculating Thermal Endurance of Materials from Thermogravimetric Decomposition Data
- ASTM E2550-07 Standard Test Method for Thermal Stability by Thermogravimetry
- ASTM E2550-11 Standard Test Method for Thermal Stability by Thermogravimetry
- ASTM E1877-21 Standard Practice for Calculating Thermal Endurance of Materials from Thermogravimetric Decomposition Data
- ASTM E2716-23 Standard Test Method for Determining Specific Heat Capacity by Modulated Temperature Differential Scanning Calorimetry
- ASTM E2550-21 Standard Test Method for Thermal Stability by Thermogravimetry
- ASTM E1952-17 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
- ASTM E1952-11 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
- ASTM E1952-23 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
RO-ASRO, Thermogravimetry and differential heat
- STAS 12739-1989 Solar energy CONSUMPTION WARM WATER PREPARATION PLANTS WITH WORKING BY GRAVITY Thermal performance determination
- STAS 12451-1986 HEAVY PLATES OF CORROSION AND HEAT-RESISTANT STEEL. Dimensions
European Committee for Standardization (CEN), Thermogravimetry and differential heat
- EN ISO 11409:1998 Plastics - Phenolic Resins - Determination of Heats and Temperatures of Reaction by Differential Scanning Calorimetry ISO 11409:1993
- EN 10055:1995 Hot rolled steel equal flange tees with radiused root and toes - Dimensions and tolerances on shape and dimensions
- EN 10058:2003 Hot rolled flat steel bars for general purposes - Dimensions and tolerances on shape and dimensions
- EN 10059:2003 Hot rolled square steel bars for general purposes - Dimensions and tolerances on shape and dimensions
- EN 10060:2003 Hot rolled round steel bars for general purposes - Dimensions and tolerances on shape and dimensions
- prEN 60584-2-1992 Thermocouples; part 2: tolerances (IEC 584-2:1982 + A1:1989)
- EN 10061:2003 Hot rolled hexagon steel bars for general purposes - Dimensions and tolerances on shape and dimensions
- EN ISO 9013:2017 Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances
- EN ISO 11357-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2021)
- EN ISO 18286:2010 Hot-rolled stainless steel plates - Tolerances on dimensions and shape
- EN ISO 11357-8:2021 Plastics - Differential scanning calorimetry (DSC) - Part 8: Determination of thermal conductivity (ISO 11357-8:2021)
- prEN 442-1991 Radiators, convectors and similar appliances; testing and rating standard
- prEN 10048-1992 Hot rolled narrow steel strip; tolerances on dimensions and shape
- EN 10048:1996 Hot rolled narrow steel strip - Tolerances on dimensions and shape
- EN 10279:2000 Hot rolled steel channels - Tolerances on shape, dimensions and mass
- EN 10092-1:2003 Hot rolled spring steel flat bars - Part 1: Flat bars - Dimensions and tolerances on shape and dimensions
Professional Standard - Energy, Thermogravimetry and differential heat
- NB/SH/T 0632-2014 Standard test method for determining specific heat capacity by differential scanning calorimetry
工业和信息化部, Thermogravimetry and differential heat
- JB/T 14644-2022 Air source heat pump unit for small temperature difference heat exchange
- YB/T 4832-2020 Heavy duty hot rolled H-beam
- YS/T 1256-2018 Differential scanning calorimetry for specific heat capacity test of non-ferrous metal materials
- JB/T 14247-2022 Heavy duty hot die forging press
- YB/T 6048-2022 Determination method of thermal weight loss of coal pitch
- YS/T 1257-2018 Differential scanning calorimetry for melting and crystallization enthalpy tests of non-ferrous metal materials
National Metrological Verification Regulations of the People's Republic of China, Thermogravimetry and differential heat
工业和信息化部/国家能源局, Thermogravimetry and differential heat
NZ-SNZ, Thermogravimetry and differential heat
- NZSS GP 43-1965 ELECTRICALLY-HEATED HOT FOOD SERVICE COUNTERS (BAIN MARIE TYPE) WITH CUPBOARDS
Danish Standards Foundation, Thermogravimetry and differential heat
- DS/EN 10059:2003 Hot rolled square steel bars for general purposes - Dimensions and tolerances on shape and dimensions
- DS/EN 10029:2011 Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape
- DS/EN ISO 9013:2002 Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances
- DS/EN ISO 9013/A1:2004 Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances
- DS/EN ISO 11357-4:2013 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity
- DS/ISO 11357-8:2021 Plastics – Differential scanning calorimetry (DSC) – Part 8: Determination of thermal conductivity
- DS/ISO 11357-4:2021 Plastics – Differential scanning calorimetry (DSC) – Part 4: Determination of specific heat capacity
- DS/EN ISO 11409:1999 Plastics - Phenolic resins - Determination of heats and temperatures of reaction by differential scanning calorimetry
- DS/EN 4383:2007 Aerospace series - Heat resisting alloy NI-CH2601 (NiCr19Fe19Nb5Mo3) - Non heat treated - Remelting stock
- DS/EN 4384:2007 Aerospace series - Heat resisting alloy NI-CH1303 (NiCo20Cr20Mo5Ti2Al) - Non heat treated - Remelting stock
- DS/EN 10092-1:2003 Hot rolled spring steel flat bars - Part 1: Flat bars - Dimensions and tolerances on shape and dimensions
Lithuanian Standards Office , Thermogravimetry and differential heat
- LST EN 10059-2004 Hot rolled square steel bars for general purposes - Dimensions and tolerances on shape and dimensions
- LST EN 10029-2011 Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape
- LST EN ISO 9013:2003 Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2002)
- LST EN ISO 9013:2003/A1:2004 Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2003)
- LST EN 4384-2007 Aerospace series - Heat resisting alloy NI-CH1303 (NiCo20Cr20Mo5Ti2Al) - Non heat treated - Remelting stock
- LST EN 4383-2007 Aerospace series - Heat resisting alloy NI-CH2601 (NiCr19Fe19Nb5Mo3) - Non heat treated - Remelting stock
AENOR, Thermogravimetry and differential heat
- UNE-EN 10059:2004 Hot rolled square steel bars for general purposes - Dimensions and tolerances on shape and dimensions
- UNE-EN 10029:2011 Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape
- UNE-EN ISO 9013:2017 Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2017)
- UNE 36564:1981 HOT-ROLLED RECTANGULAR ROUNDED EDGE BARS. MESSURES AND TOLERANCES
- UNE-EN 10048:1997 HOT ROLLED NARROW STEEL STRIP. TOLERANCES ON DIMENSIONS AND SHAPE.
未注明发布机构, Thermogravimetry and differential heat
Defense Logistics Agency, Thermogravimetry and differential heat
- DLA A-A-50544 VALID NOTICE 2-2006 RADIATORS, HEATING, STEAM AND HOT WATER, CAST IRON
- DLA A-A-50544 VALID NOTICE 1-2001 RADIATORS, HEATING, STEAM AND HOT WATER, CAST IRON
- DLA A-A-50544-1993 RADIATORS, HEATING, STEAM AND HOT WATER, CAST IRON
- DLA A-A-50545 VALID NOTICE 2-2006 RADIATOR, HEATING, BASEBOARD PANEL, STEAM AND HOT WATER
- DLA A-A-50545 VALID NOTICE 1-2001 RADIATOR, HEATING, BASEBOARD PANEL, STEAM AND HOT WATER
- DLA A-A-50545-1993 RADIATOR, HEATING, BASEBOARD PANEL, STEAM AND HOT WATER
Society of Automotive Engineers (SAE), Thermogravimetry and differential heat
- SAE AMS2241C-1954 TOLERANCES Corrosion and Heat Resistant Steel Bars and Titanium and Titanium Alloy Bars
- SAE AMS2243G-2000 Tolerances Corrosion and Heat Resistant Steel Tubing
- SAE AMS2241B-1950 TOLERANCES Corrosion and Heat Resistant Steel Bars
- SAE AMS2243L-2021 Tolerances Corrosion and Heat-Resistant Steel Tubing
- SAE AMS2243H-2006 Tolerances Corrosion and Heat-Resistant Steel Tubing [Superseded: SAE MAM 2243D, SAE MAM 2243C, SAE MAM 2243B, SAE MAM 2243B]
- SAE AMS2243K-2013 Tolerances Corrosion and Heat Resistant Steel Tubing
- SAE AMS2243G-1990 Tolerances, Corrosion and Heat Resistant Steel, Tubing
- SAE AMS5622F-2013 Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing, and Rings, 16Cr - 4.0Ni - 0.30Cb - 4.0Cu, Solution Heat Treated, Precipitation Hardenable, Consumable Electrode Remelted
- SAE J1361-2001 Hot Plate Method for Evaluating Heat Resistance and Thermal Insulation Properties of Materials
- SAE J1361-2013 Hot Plate Method for Evaluating Heat Resistance and Thermal Insulation Properties of Materials
- SAE MAM2243B-1990 Tolerances, Metric, Corrosion and Heat Resistant Steel Tubing
IT-UNI, Thermogravimetry and differential heat
International Electrotechnical Commission (IEC), Thermogravimetry and differential heat
European Committee for Electrotechnical Standardization（CENELEC）, Thermogravimetry and differential heat
- HD 446.2-1984 Thermocouples Part 2: Tolerances
- HD 446.2 S2-1990 Thermocouples Part 2: Tolerances
- EN 61074:1993 Determination of Heats and Temperatures of Melting and Crystallization of Electrical Insulating Materials by Differential Scanning Calorimetry (IEC 1074 : 1991)
SAE - SAE International, Thermogravimetry and differential heat
Professional Standard - Electron, Thermogravimetry and differential heat
Military Standard of the People's Republic of China-General Armament Department, Thermogravimetry and differential heat
- GJB 772.202-1989 Explosives test methods Explosives compatibility test Differential thermal analysis and differential scanning calorimetry
- GJB 737.14-1995 Test Methods for Pyrotechnic Agents Compatibility Test Differential Thermal Analysis and Differential Scanning Calorimetry
PL-PKN, Thermogravimetry and differential heat
- PN E02301-1990 Electroheating installations and their heating devices Classification and definitions
- PN C96002-1986 Gas fuels Messuring of gross and net calorific values with an calorimeter
- PN H83159-1990 Heat resistant and resistant heavy duty cast steel Grades
- PN E77005-1972 Electrically heated blamkets and pads Requjrements and test specifications
Professional Standard - Light Industry, Thermogravimetry and differential heat
- QB/T 2163-2012 Heating wire for blankets, pads and similar flexible heating appliances
AT-ON, Thermogravimetry and differential heat
FI-SFS, Thermogravimetry and differential heat
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Thermogravimetry and differential heat
International Federation of Trucks and Engines, Thermogravimetry and differential heat
Professional Standard - Aerospace, Thermogravimetry and differential heat
CEN - European Committee for Standardization, Thermogravimetry and differential heat
- EN ISO 11357-4:2013 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity
Professional Standard - Petroleum, Thermogravimetry and differential heat
- SY/T 0545-2012 Determination of thermal property parameters of the wax precipitation in crude oil.Test method by differential scanning calorimetry
- SY 0545-2012 Determination of Thermal Characteristic Parameters of Wax Precipitation in Crude Oil Differential Scanning Calorimetry
- SY/T 0545-1995 Determination of Thermal Characteristic Parameters of Wax Precipitation in Crude Oil Differential Scanning Calorimetry
Professional Standard - Military and Civilian Products, Thermogravimetry and differential heat
- WJ/T 9054-2006 Test method for thermal stability of industrial explosives: differential scanning calorimetry
- WJ 2290-1995 Verification Regulations for Differential Scanning Calorimeter
- WJ 2292-1995 Verification Regulations for Thermogravimetric Analyzer
Henan Provincial Standard of the People's Republic of China, Thermogravimetry and differential heat
- DB41/T 1046-2015 Heat insulation limit value and heat insulation grade of aluminum alloy heat insulation profiles
ES-UNE, Thermogravimetry and differential heat
- UNE-EN 10058:2019 Hot rolled flat steel bars and steel wide flats for general purposes - Dimensions and tolerances on shape and dimensions
- UNE-EN ISO 11357-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2021)
- UNE-EN ISO 11357-8:2021 Plastics - Differential scanning calorimetry (DSC) - Part 8: Determination of thermal conductivity (ISO 11357-8:2021)
- UNE-EN 60584-1:2013 Thermocouples - Part 1: EMF specifications and tolerances (Endorsed by AENOR in January of 2014.)
VN-TCVN, Thermogravimetry and differential heat
HU-MSZT, Thermogravimetry and differential heat
(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Thermogravimetry and differential heat
GOSTR, Thermogravimetry and differential heat
- GOST R 57830-2017 Composites. Determination of thermal conductivity and thermal diffusivity by modulated temperature differential scanning calorimetry
- GOST R 57920-2017 Plastics. Phenolic resins. Determination of heat and temperature of reaction by differential scanning calorimetry
(U.S.) Ford Automotive Standards, Thermogravimetry and differential heat
Shandong Provincial Standard of the People's Republic of China, Thermogravimetry and differential heat
- DB37/T 4344-2021 Technical requirements for safe operation of steel-water gravity heat pipe heat exchanger
Professional Standard - Petrochemical Industry, Thermogravimetry and differential heat
- NB/SH/T 0832-2010 Determination of hot surface oxidation of lubricating oils by pressure differential scanning calorimetry
American Welding Society (AWS), Thermogravimetry and differential heat
- AWS C4.6M-2006 Thermal Cutting Classification of Thermal Cuts Geometric Product Specification and Quality Tolerances First Edition
Hebei Provincial Standard of the People's Republic of China, Thermogravimetry and differential heat
- DB13/T 2256-2015 Silicone rubber heating wires for electric heating mattresses, electric heating pads and similar flexible heating appliances
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Thermogravimetry and differential heat
- ASHRAE 4833-2006 Impacts of Manufacturing Tolerances of the Effectiveness-Ntu Method for Regenerative Exchanger Design
Professional Standard - Textile, Thermogravimetry and differential heat
- FZ/T 50061-2023 Man-made fibers——Test method for thermal absorption and release performance of phase change materials——Differential scanning calorimetry(DSC)
Malaysia Standards, Thermogravimetry and differential heat
- MS 1491-2001 Dimensions,mass and tolerances of hot rolled non-alloy structural steel sections and H-piles(First revision)
Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Thermogravimetry and differential heat
- GJB 5891.17-2006 Test method of loading material for initiating explosive device Part 17: Compatibility test Method of DTA and DSC
Building Officials and Code Administrators International(U.S.), Thermogravimetry and differential heat
TR-TSE, Thermogravimetry and differential heat
- TS 2163-1980 HOT ROLLED STELL SHEETS AND PLATES DIMENSIONS AND TOLERANCES
Indonesia Standards, Thermogravimetry and differential heat
- SNI 3021-1992 Solar energy water heater for domestic use, Direct thermosiphone system with additional heater
国家质量监督检验检疫总局, Thermogravimetry and differential heat
- SN/T 3078.2-2015 Determination of thermal stability of chemicals Part 2: Thermogravimetric analysis
WRC - Welding Research Council, Thermogravimetry and differential heat
Professional Standard - Urban Construction, Thermogravimetry and differential heat
- CJ/T 469-2015 Heat exchanger of gas water heater and gas heating boiler
American National Standards Institute （ANSI), Thermogravimetry and differential heat
- ANSI/AWS C4.6M:2006 Thermal Cutting - Classification of Thermal Cuts - Geometric Product Specification and Quality Tolerances
ZA-SANS, Thermogravimetry and differential heat
- SANS 9013:2006 Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances
Professional Standard - Chemical Industry, Thermogravimetry and differential heat
NL-NEN, Thermogravimetry and differential heat
National Metrological Technical Specifications of the People's Republic of China, Thermogravimetry and differential heat
- JJF 1697-2018 Program of Pattern Evaluation of Differential Scanning Calorimeters