ZH
RU
ES
plastic drying dish
plastic drying dish, Total:291 items.
In the international standard classification, plastic drying dish involves: Equipment for the rubber and plastics industries, Equipment for the chemical industry, Analytical chemistry, Laboratory medicine, Paint ingredients, Fertilizers, Paints and varnishes, Plastics, Refractories, Pipeline components and pipelines, Construction materials, Sacks. Bags, Packaging materials and accessories, Measurement of volume, mass, density, viscosity, Materials for aerospace construction, Animal feeding stuffs, Hospital equipment, Kitchen equipment, Agricultural machines, implements and equipment, Nuclear energy engineering, Burners. Boilers, Rubber and plastics products, Microbiology, Earthworks. Excavations. Foundation construction. Underground works, Spices and condiments. Food additives, Fuels, Road engineering, Wood, sawlogs and sawn timber, Air quality, Organic chemicals, Wood-based panels, Paint coating equipment, Protection against fire, Metalliferous minerals, Surface treatment and coating, Textile fibres, Electricity. Magnetism. Electrical and magnetic measurements, Insulating materials, Coatings and related processes used in aerospace industry.
Professional Standard - Machinery, plastic drying dish
Professional Standard - Agriculture, plastic drying dish
工业和信息化部/国家能源局, plastic drying dish
CZ-CSN, plastic drying dish
HU-MSZT, plastic drying dish
RO-ASRO, plastic drying dish
- STAS 4646-1981 Laboratory glassware DESICCATORS
- STAS 11548-1982 Porcelain laboratory ware DESICCATOR PLATES TYPE A
- STAS 5239-1982 Laboratory glassware VALVES FOR DESICCATORS Shape and dimensions
- STAS 5501-1981 ARTIFICIAL STONES Detrition determination in dry state
- STAS 6200/9-1992 Natural stones for buildings. Determination of wearing resistance through dry abrasion
- STAS SR ISO 8189:1995 Solid fertilizers - Determination of moisture content - Gravimetric method by drying under reduced pressure
Association Francaise de Normalisation, plastic drying dish
- NF EN ISO 13130:2011 Verrerie de laboratoire - Dessiccateurs
- NF T30-305:2011 Driers for paints and varnishes.
- NF B35-902:1983 Plastics laboratory ware. Beakers.
- NF B35-903:1983 Plastics laboratory ware. Filter funnels.
- NF T30-087-3*NF EN ISO 9117-3:2010 Paints and varnishes - Drying tests - Part 3 : surface-drying test using ballotini.
- NF B35-904*NF EN ISO 24998:2009 Plastics laboratory ware - Single-use Petri dishes for microbiological procedures.
- NF T51-224-1:2011 Plastics - Determination of the thermal stability by over drying (floating platen chamber) - Part 1 : general
- NF T51-224-2:2011 Plastics - Determination of the thermal stability by over drying (floating platen chamber) - Part 2 : polyethylenes and similar materials
- NF T35-010:1989 INSTALLATIONS FOR APPLICATION AND DRYING OF PAINTS AND VARNISHES. DRYING ENCLOSURES. DESIGN,WORKING CHARACTERISTICS AND MEASUREMENT METHODS.
- NF T51-622:1985 PLASTICS. POLYPROPYLENE AND PROPYLENE-COPOLYMERS. DETERMINATION OF THERMAL OXIDATIVE STABILITY IN AIR. OVEN METHOD.
- NF EN ISO 10468:2023 Tubes en plastiques thermodurcissables renforcés de verre (PRV) - Détermination des propriétés de fluage annulaires en conditions humides ou sèches
- NF B35-901:1983 Plastics laboratory ware. Graduated measuring cylinders.
- NF T30-037:1995 Paints and varnishes. Surface-drying test. Ballotini method.
- NF T57-212*NF EN 761:1994 Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Determination of the creep factor dry conditions.
- NF X43-007:2008 Air quality - Ambient air - Determination of the mass of dry atmospheric depositions - Sampling on deposit plates - Preparation and treatment.
- NF T30-087-6*NF EN ISO 9117-6:2012 Paints and varnishes - Drying tests - Part 6 : print-free test
- NF V08-301:1983 Microbiology of food and feeding stuffs. Desiccated products. Microbiological analysis.
- NF T35-001:1986 Installations for application and drying of paints and varnishes. Terminology and classification.
- NF U42-410*NF EN 12049:1997 Solid fertilizers and liming materials. Determination of moisture content. Gravimetric method by drying under reduced pressure.
- NF T35-008:1986 Installation for the application and drying of paints and varnishes type items for enquiry.
- NF EN ISO 12570:2000 Performance hygrothermique des matériaux et produits pour le bâtiment - Détermination du taux d'humidité par séchage à chaud
- NF U42-411*NF EN 12048:1997 Solid fertilizers and liming materials. Determination of moisture content. Gravimetric method by drying at (105 + or - 2) degrees C;.
- NF T58-100:1971 Plastics materials. Surface coating of metals. Plastics coatings.(dry application). Specification.
- NF EN ISO 24998:2009 Matériel de laboratoire en matière plastique - Boîtes de Petri à usage unique pour méthodes microbiologiques
- NF L16-116:1991 Aerospace series. Paints and varnishes. Determination of drying time "needle hard".
- NF L16-115:1991 Aerospace series. Paints and varnishes. Determination of drying time "core hard".
German Institute for Standardization, plastic drying dish
- DIN EN ISO 13130:2011-10 Laboratory glassware - Desiccators (ISO 13130:2011); German version EN ISO 13130:2011
- DIN 12911:1977 Porcelain laboratory ware; desiccator plates
- DIN 55474:1997 Auxiliary means of packaging - Desiccants in bag - Application, calculation of the required number of desiccant units
- DIN 55474:2015 Auxiliary means of packaging - Desiccants in bag - Application, calculation of the required number of desiccant units
- DIN 55901:2002 Driers for paints and varnishes - Methods for determination of metal contents of mixed driers
- DIN EN 761:1994-08 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the creep factor under dry conditions; German version EN 761:1994 / Note: To be replaced by DIN EN ISO 10468 (2022-08).
- DIN EN ISO 24998:2009 Plastics laboratory ware - Single-use Petri dishes for microbiological procedures (ISO 24998:2008); English version of DIN EN ISO 24998:2009-03
- DIN EN 761:1994 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the creep factor under dry conditions; German version EN 761:1994
- DIN 12672:2001-10 Laboratory glass or plastics ware - Imhoff sedimentation cones
- DIN 10236:2001 Analysis of spices and condiments - Determination of loss in mass of capsicum and allium species and of dried vegetables by vacuum oven drying
- DIN 55601:1990-09 Testing of pigments; determination of a hiding power value of dried paints using a wedge-shaped layer
- DIN 12672:2001 Laboratory glass or plastics ware - Imhoff sedimentation cones
- DIN 51030:1954 Testing of ceramic raw materials and materials; determination of the dry bending strength
- DIN EN ISO 10468:2022-08 Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the ring creep properties under wet or dry conditions (ISO/DIS 10468:2022); German and English version prEN ISO 10468:2022 / Note: Date of issue 2022-07-15*Intended as replacement f...
- DIN 12693:2002-02 Plastics laboratory ware - Disposable micropipettes adjusted on "In"
- DIN EN 1367-4:2008 Tests for thermal and weathering properties of aggregates - Part 4: Determination of drying shrinkage; English version of DIN EN 1367-4:2008-06
- DIN 53150:2002 Paints and varnishes - Determination of the drying stage of coatings (modified Bandow-Wolff method)
- DIN EN 15928:2010 Fertilizers - Determination of the fineness of grinding (dry procedure); German version EN 15928:2010
- DIN EN ISO 4619:2011 Driers for paints and varnishes (ISO 4619:1998); German version EN ISO 4619:2010
- DIN 55601:1990 Testing of pigments; determination of a hiding power value of dried paints using a wedge-shaped layer
- DIN EN ISO 24998:2009-03 Plastics laboratory ware - Single-use Petri dishes for microbiological procedures (ISO 24998:2008); German version EN ISO 24998:2008
- DIN EN 1097-4:2008 Tests for mechanical and physical properties of aggregates - Part 4: Determination of the voids of dry compacted filler; English version of DIN EN 1097-4:2008-06
Lithuanian Standards Office , plastic drying dish
- LST EN ISO 13130:2011 Laboratory glassware - Desiccators (ISO 13130:2011)
- LST EN 761+AC-2002 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the creep factor under dry conditions
- LST EN ISO 24998:2009 Plastics laboratory ware - Single-use Petri dishes for microbiological procedures (ISO 24998:2008)
AENOR, plastic drying dish
- UNE-EN ISO 13130:2011 Laboratory glassware - Desiccators (ISO 13130:2011)
- UNE 84087:1994 COSMETIC RAW MATERIALS. LOSS ON DRYING. DRYING OVER A DISICANT AGENT.
- UNE-EN 761:1995 PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. DETERMINATION OF THE CREEP FACTOR UNDER DRY CONDITIONS.
- UNE 135202:2010 Road signalization equipment. Horizontal signalisation. Paints and cold plastic. Drying time "no pick-up".
- UNE-EN ISO 24998:2009 Plastics laboratory ware - Single-use Petri dishes for microbiological procedures (ISO 24998:2008)
- UNE 146511:2008 Stability of aggregates and rock fragments against humidity-dryness cycle action.
PL-PKN, plastic drying dish
Korean Agency for Technology and Standards (KATS), plastic drying dish
- KS M ISO 4619:2013 Driers for paints and varnishes
- KS M ISO 9117-1:2012 Paints and varnishes-Drying tests-Part 1:Determination of through-dry state and through-dry time
- KS M 3841-1993 Sterilized plastic petri dishes
- KS M 3841-2019 Sterilized plastic petri dishes
- KS M 3841-2009 Sterilized plastic petri dishes
- KS M 5202-2011 Driers for paints and varnishes
- KS M ISO 7684:2004 Plastics piping systems-Glass-reinforced thermosetting plastics(GRP) pipes-Determination of the creep factor under dry conditions
- KS L 5220-2007 Dry ready mixed cement mortar
- KS M ISO 7684:2019 Plastics piping systems — Glass-reinforced thermosetting plastics(GRP) pipes — Determination of the creep factor under dry conditions
- KS M ISO 9117-3:2012 Paints and varnishes－Drying tests－Part 3：Surface-drying test using ballotini
- KS M 5986-2008 Detection of lead in paint and dried paint films
- KS B ISO 12771:2006 Plastics laboratory ware－Disposable serological pipettes
- KS L 0010-2017(2022) Calculation method of heat balance of continuous dryer for ores and other materials
- KS M ISO 9117-6:2013 Paints and varnishes — Drying tests–Part 6: Print-free test
- KS E ISO 10251-2008(2018) Copper, lead, zinc and nickel concentrates－Determination of mass loss of bulk material on drying
- KS M ISO 10468:2019 Glass-reinforced thermosetting plastics(GRP) pipes — Determination of the ring creep properties under wet or dry conditions
- KS M ISO 9117-2:2012 Paints and varnishes-Drying tests-Part 2:Pressure test for stackability
- KS M ISO 9117-5:2013 Paints and varnishes — Drying tests–Part 5: Modified Bandow-Wolff test
- KS F 2472-2019 Dry freezing-thawing testing method of product for the protection and repair of concrete structures
- KS F 2472-2009 Dry freezing-thawing testing method of product for the protection and repair of concrete structures
- KS F 2472-1986 Dry freezing-thawing testing method of product for the protection and repair of concrete structures
- KS C IEC 61621:2014 Dry, solid insulating materials — Resistance test to high-voltage, low-current arc discharges
- KS F 2550-2017(2022) Methods of test for total moisture content of aggregate and surface moisture in aggregate by drying
- KS F 2550-2017 Methods of test for total moisture content of aggregate and surface moisture in aggregate by drying
Taiwan Provincial Standard of the People's Republic of China, plastic drying dish
British Standards Institution (BSI), plastic drying dish
- BS EN ISO 9117-1:2009 Paints and varnishes - Drying tests - Determination of through-dry state and through-dry time
- BS ISO 4619:1998 Driers for paints and varnishes
- BS EN ISO 4619:2010 Driers for paints and varnishes
- BS EN ISO 9117-3:2010 Paints and varnishes - Drying tests - Surface-drying test using ballotini
- BS ISO 5215:2022 Laboratory plastic ware. Volumetric flasks
- BS EN 761:1995 Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the creep factor under dry conditions
- BS 5452:1977 Specification for hospital hollow-ware made of plastics material
- BS EN 267:2009+A1:2011 Automatic forced draught burners for liquid fuels
- BS EN ISO 24998:2010 Plastics laboratory ware. Single-use Petri dishes for microbiological procedures
- BS EN ISO 24998:2008 Plastics laboratory ware - Single-use Petri dishes for microbiological procedures
- BS 611-2:1990 Petri dishes - Specification for plastics Petri dishes for single use
- BS ISO 12771:1997 Plastics laboratory ware - Disposable serological pipettes
- BS EN ISO 384:2015 Laboratory glass and plastics ware. Principles of design and construction of volumetric instruments
- BS EN ISO 9117-5:2012 Paints and varnishes. Drying tests. Modified Bandow-Wolff test
- BS EN 12048:1997 Solid fertilizers and liming materials - Determination of moisture content - Gravimetric method by drying at (105 <+OR-> 2) °C
- BS EN 12048:1997(2011) Solid fertilizers and liming materials - Determination of moisture content - Gravimetric method by drying at (105 <+OR-> 2) °C
- BS EN 61621:1997 Dry, solid insulating materials. Resistance test to high-voltage, low-current arc discharges
American Society for Testing and Materials (ASTM), plastic drying dish
- ASTM C1054-85(1995) Standard Practice for Pressing and Drying Refractory Plastic and Ramming Mix Specimens
- ASTM C1054-18 Standard Practice for Pressing and Drying Refractory Plastic and Ramming Mix Specimens
- ASTM C1553-21 Standard Guide for Drying of Spent Nuclear Fuel
- ASTM C179-11 Standard Test Method for Drying and Firing Linear Change of Refractory Plastic and Ramming Mix Specimens
- ASTM C1054-03 Standard Practice for Pressing and Drying Refractory Plastic and Ramming Mix Specimens
- ASTM C1553-08 Standard Guide for Drying Behavior of Spent Nuclear Fuel
- ASTM C1553-16 Standard Guide for Drying Behavior of Spent Nuclear Fuel
- ASTM C1054-03(2008) tandard Practice for Pressing and Drying Refractory Plastic and Ramming Mix Specimens
- ASTM D7227/D7227M-22 Standard Practice for Rapid Drying of Compacted Asphalt Mixture Specimens Using Vacuum Drying Apparatus
- ASTM D5245-92(2005) Standard Practice for Cleaning Laboratory Glassware, Plasticware, and Equipment Used in Microbiological Analyses
- ASTM D5245-19 Standard Practice for Cleaning Laboratory Glassware, Plasticware, and Equipment Used in Microbiological Analyses
- ASTM D564-87(2023) Standard Test Methods for Liquid Paint Driers
- ASTM C179-09 Standard Test Method for Drying and Firing Linear Change of Refractory Plastic and Ramming Mix Specimens
- ASTM C1054-13 Standard Practice for Pressing and Drying Refractory Plastic and Ramming Mix Specimens
- ASTM C1480-00(2005) Standard Specification for Packaged, Pre-Blended, Dry, Combined Materials for Use in Wet or Dry Shotcrete Application
- ASTM C1480/C1480M-07(2012) Standard Specification for Packaged, Pre-Blended, Dry, Combined Materials for Use in Wet or Dry Shotcrete Application
- ASTM C179-04 Standard Test Method for Drying and Firing Linear Change of Refractory Plastic and Ramming Mix Specimens
- ASTM C179-14 Standard Test Method for Drying and Firing Linear Change of Refractory Plastic and Ramming Mix Specimens
- ASTM C179-85(1999) Standard Test Method for Drying and Firing Linear Change of Refractory Plastic and Ramming Mix Specimens
- ASTM C179-14(2019) Standard Test Method for Drying and Firing Linear Change of Refractory Plastic and Ramming Mix Specimens
- ASTM D3988-05 Standard Test Method for Vanadium in Paint Driers by EDTA Method
- ASTM C566-19 Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying
- ASTM D1640/D1640M-14 Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings
- ASTM D2374-05 Standard Test Method for Lead in Paint Driers by EDTA Method
- ASTM D2373-05 Standard Test Method for Determination of Cobalt in Paint Driers by EDTA Method
- ASTM C566-97 Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying
- ASTM D2375-05 Standard Test Method for Manganese in Paint Driers by EDTA Method
- ASTM C387/C387M-11a Standard Specification for Packaged, Dry, Combined Materials for Mortar and Concrete
- ASTM C566-97(2004) Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying
- ASTM C1562-03 Standard Guide for Evaluation of Materials Used in Extended Service of Interim Spent Nuclear Fuel Dry Storage Systems
- ASTM C1562-03e1 Standard Guide for Evaluation of Materials Used in Extended Service of Interim Spent Nuclear Fuel Dry Storage Systems
- ASTM C1562-03e2 Standard Guide for Evaluation of Materials Used in Extended Service of Interim Spent Nuclear Fuel Dry Storage Systems
- ASTM C1562-10(2018) Standard Guide for Evaluation of Materials Used in Extended Service of Interim Spent Nuclear Fuel Dry Storage Systems
- ASTM D2375-85(1999) Standard Test Method for Manganese in Paint Driers by EDTA Method
- ASTM D2374-85(1999) Standard Test Method for Lead in Paint Driers by EDTA Method
- ASTM C887-19a Standard Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar
- ASTM C887-19 Standard Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar
- ASTM D2374-05(2011) Standard Test Method for Lead in Paint Driers by EDTA Method
- ASTM D2375-05(2011) Standard Test Method for Manganese in Paint Driers by EDTA Method
- ASTM C887-20 Standard Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar
- ASTM D3970-80(1999) Standard Test Method for Cerium in Paint Driers by Oxidimetric Determination
- ASTM D3970-05 Standard Test Method for Cerium in Paint Driers by Oxidimetric Determination
- ASTM D1640-03 Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature
- ASTM D3804-86(1996) Standard Test Method for Iron in Paint Driers by EDTA Method
- ASTM D3804-02 Standard Test Method for Iron in Paint Driers by EDTA Method
- ASTM D3804-02(2008) Standard Test Method for Iron in Paint Driers by EDTA Method
- ASTM D1640-03(2009) Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature
- ASTM D3970-05(2011) Standard Test Method for Cerium in Paint Driers by Oxidimetric Determination
- ASTM D2373-05(2011) Standard Test Method for Determination of Cobalt in Paint Driers by EDTA Method
RU-GOST R, plastic drying dish
AT-ON, plastic drying dish
- ONORM K 2020 Teil.4-1981 Freeze-drying ofsubstances ofbiological originfor medical use; labelling of the dried materiell
- ONORM K 2020 Teil.3-1981 Freeze-drying of substances ofbiological origin for medical use; declaration of characteristics ofthe material
SE-SIS, plastic drying dish
ES-UNE, plastic drying dish
- UNE 84087:2020 Cosmetic raw materials. Determination of volatile matter. Drying method over a desiccant agent.
International Organization for Standardization (ISO), plastic drying dish
- ISO 7056:1981 Plastics laboratory ware; Beakers
- ISO 5215:2022 Laboratory plastic ware — Volumetric flasks
- ISO 7057:1981 Plastics laboratory ware; Filter funnels
- ISO 6706:1981 Plastics laboratory ware; Graduated measuring cylinders
- ISO 7684:1997 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the creep factor under dry conditions
- ISO 24998:2008 Plastics laboratory ware - Single-use Petri dishes for microbiological procedures
- ISO 12771:1997 Plastics laboratory ware - Disposable serological pipettes
- ISO/DIS 10468 Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the ring creep properties under wet or dry conditions
- ISO 9117-6:2012 Paints and varnishes - Drying tests - Part 6: Print-free test
- ISO 384:2015 Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments
- ISO 384:1979 Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments
- ISO 8189:1992 Solid fertilizers — Determination of moisture content — Gravimetric method by drying under reduced pressure
Japanese Industrial Standards Committee (JISC), plastic drying dish
- JIS K 0950:1988 Sterilized plastic petri dishes
- JIS K 7041:1998 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the creep factor under dry conditions
- JIS S 2040:1994 Large plastics lockable containers for household wares
- JIS A 1460:2001 Building boards Determination of formaldehyde emission -- Desicator method
- JIS K 5600-3-3:1999 Testing methods for paints -- Part 3: Film formability -- Section 3: Through-dry
- JIS A 1476:2006 Measuring method for moisture content of building materials by drying at elevated temperature
- JIS A 1476:2016 Measuring method for moisture content of building materials by drying at elevated temperature
- JIS C 2135:2011 Dry, solid insulating materials.Resistance test to high-voltage low-current arc discharges
- JIS A 1125:2007 Methods of test for moisture content of aggregate and surface moisture in aggregate by drying
- JIS A 1125:2015 Methods of test for moisture content of aggregate and surface moisture in aggregate by drying
CEN - European Committee for Standardization, plastic drying dish
European Committee for Standardization (CEN), plastic drying dish
- EN ISO 4619:2010 Driers for paints and varnishes (ISO 4619:1998)
- EN ISO 24998:2008 Plastics laboratory ware - Single-use Petri dishes for microbiological procedures
- EN 761:1994 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the creep factor under dry conditions
- EN ISO 10468:2023 Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the ring creep properties under wet or dry conditions (ISO 10468:2023)
- EN 1367-4:2008 Tests for thermal and weathering properties of aggregates - Part 4: Determination of drying shrinkage
- prEN ISO 10468 Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the ring creep properties under wet or dry conditions (ISO/DIS 10468:2022)
Canadian General Standards Board （CGSB), plastic drying dish
YU-JUS, plastic drying dish
- JUS B.E8.132-1991 Insulating glass units. Determination of the loading of desiccant in interspace between glass plates. Weighting method
- JUS B.B8.102-1982 Testing of mineral filler. The determination of voids of dry compacted filler (Rigden method)
Malaysia Standards, plastic drying dish
Society of Automotive Engineers (SAE), plastic drying dish
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, plastic drying dish
CO-ICONTEC, plastic drying dish
Danish Standards Foundation, plastic drying dish
- DS/EN 761:1995 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the creep factor under dry conditions
- DS/EN ISO 24998:2009 Plastics laboratory ware - Single-use Petri dishes for microbiological procedures
- DS/EN 12049:1997 Solid fertilizers and liming materials - Determination of moisture content - Gravimetric method by drying under reduced pressure
KR-KS, plastic drying dish
- KS M ISO 7684-2019 Plastics piping systems — Glass-reinforced thermosetting plastics(GRP) pipes — Determination of the creep factor under dry conditions
- KS M ISO 10468-2019 Glass-reinforced thermosetting plastics(GRP) pipes — Determination of the ring creep properties under wet or dry conditions
未注明发布机构, plastic drying dish
- BS EN 761:1995(1999) Plastics piping systems — Glass - reinforced thermosetting plastics (GRP) pipes — Determination of the creep factor under dry conditions
Group Standards of the People's Republic of China, plastic drying dish
- T/TCVMA 0020-2022 Chebulae fructus dried matter of natural plant as feed materials
- T/TCVMA 0005-2020 Natural Plant as Feed Materials Glycyrrhizae Radix et Rhizoma Dry Matter
- T/TCVMA 0002-2020 Natural Plant as Feed Materials Astragaius memganaceus Radix et Rhizoma dry matter
- T/TCVMA 0011-2020 Natural Plant as Feed Materials Gynostemmae Herba Dry Matter
- T/TCVMA 0017-2022 Dendranthemae indici flos dried matter of natural plant as feed materials
- T/TCVMA 0008-2020 Natural Plant as Feed Materials Lonicerae Japonicae Flos Dry Matter
- T/TCVMA 0014-2022 Ligustri lucidi fructus dried matter of natural plant as feed materials
BE-NBN, plastic drying dish
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, plastic drying dish
Standard Association of Australia （SAA）, plastic drying dish
VN-TCVN, plastic drying dish
IN-BIS, plastic drying dish
GOSTR, plastic drying dish
- GOST R 57783-2017 Fiberglass-reinforced thermosetting plastic pipes. Determination of creep factor under dry condition
- GOST 7319-2019 Sawn timber blanks of broad-leaved species. Atmospheric drying and storage
CH-SNV, plastic drying dish
PT-IPQ, plastic drying dish
Indonesia Standards, plastic drying dish
- SNI 1971-2011 Cara uji kadar air total agregat dengan pengeringan
U.S. Military Regulations and Norms, plastic drying dish
IT-UNI, plastic drying dish
Liaoning Provincial Standard of the People's Republic of China, plastic drying dish
- DB21/T 2667-2016 Technical specification for quality evaluation of drum dryers for agricultural materials
(U.S.) Ford Automotive Standards, plastic drying dish
- FORD ESB-M6J121-A-2012 PRIMER, FLASH - POLYPROPYLENE PLASTIC - INTERIOR-AIR DRY OR BAKING COLOR COAT ***TO BE USED WITH FORD WSS-M99P1111-A***
CU-NC, plastic drying dish
- NC 32-14-1986 Color Industry. Rapid-Drying Off-shore Anticorrosive Pigments. Quality Specifications
AASHTO - American Association of State Highway and Transportation Officials, plastic drying dish
- T 255-2000 Standard Method of Test for Total Evaporable Moisture Content of Aggregate by Drying
ES-AENOR, plastic drying dish
VE-FONDONORMA, plastic drying dish
工业和信息化部, plastic drying dish
- JB/T 13615-2019 Energy efficiency limits and energy efficiency grades of belt cross-flow pellet feed dryers
International Electrotechnical Commission (IEC), plastic drying dish
- IEC 61621:1997 Dry, solid insulating materials - Resistance test to high-voltage, low current arc discharges