ZH
RU
ES
plastic watch glass
plastic watch glass, Total:500 items.
In the international standard classification, plastic watch glass involves: Plastics, Education, Surface treatment and coating, Rubber and plastics products, Analytical chemistry, Measurement of volume, mass, density, viscosity, Dentistry, Hospital equipment, Kitchen equipment, Testing of metals, Optics and optical measurements, Cans. Tins. Tubes, Laboratory medicine, Adhesives, Paint coating processes, Microbiology, Protection against fire, Furniture, Wastes, Rubber, Equipment for the rubber and plastics industries, Vocabularies, Shipbuilding and marine structures in general, Paper and board, Products of the chemical industry, Pipeline components and pipelines, Road engineering, Cellular materials, Elements of buildings, Linear and angular measurements, Audio, video and audiovisual engineering, Bottles. Pots. Jars, Reinforced plastics, Construction materials, Pharmaceutics, Environmental testing, External sewage systems, External water conveyance systems, Products of the textile industry, Mechanical testing, Inks. Printing inks, Ferrous metals, Installations in buildings, Paints and varnishes, Bridge construction, Materials for aerospace construction, Welding, brazing and soldering, Office machines, Miscellaneous domestic and commercial equipment, Manufacturing forming processes, Raw materials for rubber and plastics, Glass.
German Institute for Standardization, plastic watch glass
- DIN 12341:1970 Watch glasses
- DIN 16999:2023-07 Plastics moulded parts - Surface qualities; Text in German and English / Note: Date of issue 2023-06-02
- DIN 67530:1982 Reflectometer as a means for gloss assessment of plane surfaces of paint coatings and plastics
- DIN EN ISO 24998:2009 Plastics laboratory ware - Single-use Petri dishes for microbiological procedures (ISO 24998:2008); English version of DIN EN ISO 24998:2009-03
- DIN 7868-2:1984-12 Rubber and plastics covered rollers; surface characteristics
- DIN 12672:2001-10 Laboratory glass or plastics ware - Imhoff sedimentation cones
- DIN 7868-2:1984 Rubber and plastics covered rollers; surface characteristics
- DIN EN 16592:2022-12 Packaging - Rigid plastic containers - PET finish 29/25 (12,6); German version EN 16592:2022
- DIN EN 16068:2012-02 Packaging - Rigid plastic containers - PET finish 38; German version EN 16068:2011
- DIN 51961:1984 Testing of plastics surfaces; behaviour on exposure to glowing cigarettes
- DIN EN 16592:2022 Packaging - Rigid plastic containers - PET finish 29/25 (12,6)
- DIN EN 15347:2008-02 Plastics - Recycled Plastics - Characterisation of plastics wastes; German version EN 15347:2007 / Note: To be replaced by DIN EN 15347 (2022-04).
- DIN EN 16065:2012-02 Packaging - Rigid plastic containers - PET finish 30/25 Low (16,8); German version EN 16065:2011
- DIN EN 16593:2015-01 Packaging - Rigid plastic containers - PET finish BVS 30H60; German version EN 16593:2014
- DIN EN ISO 19712-3:2022-07 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2022); German version EN ISO 19712-3:2022
- DIN EN 15347:2022 Plastics - Recycled plastics - Characterisation of sorted plastics wastes; German and English version prEN 15347:2022
- DIN EN 15347:2022-04 Plastics - Recycled plastics - Characterisation of sorted plastics wastes; German and English version prEN 15347:2022 / Note: Date of issue 2022-02-25*Intended as replacement for DIN EN 15347 (2008-02).
- DIN EN ISO 308:1998 Plastics - Phenolic moulding materials - Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state) (ISO 308:1994); German version EN ISO 308:1997
- DIN ISO 8296:2006 Plastics - Film and sheeting - Determination of wetting tension (ISO 8296:2003)
- DIN ISO 8296:2008 Plastics - Film and sheeting - Determination of wetting tension (ISO 8296:2003);English version of DIN ISO 8296:2008-03
- DIN EN 16066:2012-02 Packaging - Rigid plastic containers - PET finish 26,7 (lead 6,35); German version EN 16066:2011
- DIN EN 16067:2012-02 Packaging - Rigid plastic containers - PET finish 26,7 (lead 9,00); German version EN 16067:2011
- DIN EN 16594:2015-01 Packaging - Rigid plastic containers - PET finish 26/22 (12,0); German version EN 16594:2014
- DIN EN 1388-2:1995-11 Materials and articles in contact with foodstuffs - Silicate surfaces - Part 2: Determination of the release of lead and cadmium from silicate surfaces other than ceramic ware; German version EN 1388-2:1995
- DIN 12672:2001 Laboratory glass or plastics ware - Imhoff sedimentation cones
- DIN EN 16064:2012-02 Packaging - Rigid plastic containers - PET finish 30/25 High (18,5); German version EN 16064:2011
- DIN EN ISO 19712-2:2013-04 Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007); German version EN ISO 19712-2:2013
- DIN 12693:2002-02 Plastics laboratory ware - Disposable micropipettes adjusted on "In"
- DIN EN 13887:2003-11 Structural adhesives - Guidelines for surface preparation of metals and plastics prior to adhesive bonding; German version prEN 13887:2003
- DIN EN 14802:2006-03 Plastics piping systems - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading; German version EN 14802:2005 / Note: To be replaced by DIN EN ISO 13266 (2022-09).
- DIN EN ISO 24998:2009-03 Plastics laboratory ware - Single-use Petri dishes for microbiological procedures (ISO 24998:2008); German version EN ISO 24998:2008
- DIN EN ISO 14130:1998 Fibre reinforced plastic composites - Determination of apparent interlaminar shear strength by short beam-method (ISO 14130:1997); German version EN ISO 14130:1997
- DIN EN 15345:2008-02 Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates; German version EN 15345:2007
- DIN EN 15344:2021-07 Plastics - Recycled plastics - Characterization of Polyethylene (PE) recyclates; German version EN 15344:2021
- DIN EN ISO 19712-3:2013 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2007); German version EN ISO 19712-3:2013
- DIN 12693:2002 Plastics laboratory ware - Disposable micropipettes adjusted on "In"
- DIN 6094-5:2021-08 Packaging - Finishes - Part 5: Finishes for sparkling wine bottles with plastic and cork stoppers and crown corks
- DIN EN 1394:1996 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength; German version EN 1394:1996
- DIN EN 16063:2012-02 Packaging - Rigid plastic containers - Nomenclature of plastic finishes; German version EN 16063:2011
- DIN EN 17615:2022 Plastics - Environmental Aspects - Vocabulary
- DIN EN 17615:2020 Plastics - Environmental Aspects - Vocabulary; German and English version prEN 17615:2020
- DIN EN 17615:2022-12 Plastics - Environmental Aspects - Vocabulary; German version EN 17615:2022
- DIN EN 15346:2022 Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates; German and English version prEN 15346:2022
- DIN EN 15346:2015-01 Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates; German version EN 15346:2014 / Note: To be replaced by DIN EN 15346 (2022-06).
- DIN EN 15342:2008-02 Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates; German version EN 15342:2007
- DIN EN 15346:2022-06 Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates; German and English version prEN 15346:2022 / Note: Date of issue 2022-05-13*Intended as replacement for DIN EN 15346 (2015-01).
- DIN EN 1388-1:1995-11 Materials and articles in contact with foodstuffs - Silicate surfaces - Part 1: Determination of the release of lead and cadmium from ceramic ware; German version EN 1388-1:1995
- DIN EN 16795:2016 Plastics - Method for estimating heat build up of flat surfaces by simulated solar radiation
- DIN EN 13887:2003 Structural adhesives - Guidelines for surface preparation of metals and plastics prior to adhesive bonding; German version prEN 13887:2003
- DIN 10113-1:1997 Determination of surface colony count on fitment and utensils in foodareas - Part 1: Quantitative swab method
- DIN EN 16795:2016-03 Plastics - Method for estimating heat build up of flat surfaces by simulated solar radiation; German version EN 16795:2015
- DIN 10113-2:1997 Determination of surface colony count on fitment and utensils in foodareas - Part 2: Semiquantitative swab method
- DIN EN ISO 10352:2020-12 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020); German version EN ISO 10352:2020
- DIN EN ISO 4787:2022-03 Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2021); German version EN ISO 4787:2021
RO-ASRO, plastic watch glass
Korean Agency for Technology and Standards (KATS), plastic watch glass
TR-TSE, plastic watch glass
- TS 767-1969 PLASTICS DETERMINATION OF APPARENT DENSITY OF CELLULAR PLACTICS
International Federation of Trucks and Engines, plastic watch glass
International Organization for Standardization (ISO), plastic watch glass
- ISO 22196:2007 Plastics - Measurement of antibacterial activity on plastics surfaces
- ISO 7056:1981 Plastics laboratory ware; Beakers
- ISO 5215:2022 Laboratory plastic ware — Volumetric flasks
- ISO 7057:1981 Plastics laboratory ware; Filter funnels
- ISO 6706:1981 Plastics laboratory ware; Graduated measuring cylinders
- ISO 24998:2008 Plastics laboratory ware - Single-use Petri dishes for microbiological procedures
- ISO 13895:1996 Adhesives - Guidelines for the surface preparation of plastics
- ISO 19712-3:2022 Plastics — Decorative solid surfacing materials — Part 3: Determination of properties — Solid surface shapes
- ISO 19712-3:2007 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes
- ISO 12771:1997 Plastics laboratory ware - Disposable serological pipettes
- ISO 22196:2011 Measurement of antibacterial activity on plastics and other non-porous surfaces
- ISO 8296:2003 Plastics - Film and sheeting - Determination of wetting tension
- ISO 8296:1987 Plastics; Film and sheeting; Determination of wetting tension
- ISO 472:2013 Plastics - Vocabulary
- ISO 19712-1:2008 Plastics - Decorative solid surfacing materials - Part 1: Classification and specifications
- ISO 21702:2019 Measurement of antiviral activity on plastics and other non-porous surfaces
- ISO 19712-2:2007 Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods
- ISO 194:1981 Plastics — List of equivalent terms
- ISO 384:2015 Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments
- ISO 384:1979 Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments
- ISO 17212:2012 Structural adhesives - Guidelines for the surface preparation of metals and plastics prior to adhesive bonding
- ISO 17212:2004 Structural adhesives - Guidelines for the surface preparation of metals and plastics prior to adhesive bonding
- ISO 6123-2:2015 Rubber or plastics covered rollers - Specifications - Part 2: Surface characteristics
- ISO 6123-2:1988 Rubber- or plastics-covered rollers; specifications; part 2: surface characteristics
- ISO 4065:1978 Thermoplastic pipes; Universal wall thickness table
- ISO 6123-2:1983 Rubber or plastics covered rollers — Specifications — Part 2: Classification of surface characteristics
- ISO 4768:2004 Measurement method of anti-biofilm activity on plastic and other non-porous surfaces
- ISO 4768:2023 Measurement method of anti-biofilm activity on plastic and other non-porous surfaces
- ISO/FDIS 4768:1975 Measurement method of anti-biofilm activity on plastic and other non-porous surfaces
- ISO/CD 8606:2023 Plastics — Prepregs — Bulk moulding compound (BMC) and dough moulding compound (DMC) — Requirements and specifications
- ISO 8521:1998 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength
- ISO 8521:2009 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Test methods for the determination of the apparent initial circumferential tensile strength
- ISO 4065:1996 Thermoplastic pipes - Universal wall thickness table
- ISO 4065:2018 Thermoplastics pipes - Universal wall thickness table
- ISO 8296:1987/Cor 1:1998 Plastics - Film and sheeting - Determination of wetting tension; Technical Corrigendum 1
- ISO 8513:2014 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Test methods for the determination of the apparent initial longitudinal tensile strength
- ISO 4787:2021 Laboratory glass and plastic ware — Volumetric instruments — Methods for testing of capacity and for use
- ISO 9782:1993 Plastics; reinforced moulding compounds and prepregs; determination of apparent volatile-matter content
- ISO 194:1981/Add 4:1981 Plastics — List of equivalent terms — Addendum 4
- ISO 194:1981/Add 1:1983 Plastics — List of equivalent terms — Addendum 1
- ISO 194:1981/Add 2:1983 Plastics — List of equivalent terms — Addendum 2
- ISO 10352:2010 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area
- ISO 10352:1997 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area
- ISO/DIS 4802-1 Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 1: Determination by titration method and classification
- ISO 194:1981/Add 5:1983 Plastics — List of equivalent terms — Addendum 5
- ISO 18852:2005 Rubber compounding ingredients - Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)
- ISO 18852:2015 Rubber compounding ingredients - Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)
- ISO 18852:2012 Rubber compounding ingredients - Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)
Professional Standard - Education, plastic watch glass
American Society for Testing and Materials (ASTM), plastic watch glass
- ASTM B532-85(2007) Standard Specification for Appearance of Electroplated Plastic Surfaces
- ASTM B532-85(1997) Standard Specification for Appearance of Electroplated Plastic Surfaces
- ASTM B532-85(2002) Standard Specification for Appearance of Electroplated Plastic Surfaces
- ASTM B532-85(2021) Standard Specification for Appearance of Electroplated Plastic Surfaces
- ASTM B532-85(2014) Standard Specification for Appearance of Electroplated Plastic Surfaces
- ASTM D5245-92(2005) Standard Practice for Cleaning Laboratory Glassware, Plasticware, and Equipment Used in Microbiological Analyses
- ASTM D5245-19 Standard Practice for Cleaning Laboratory Glassware, Plasticware, and Equipment Used in Microbiological Analyses
- ASTM D2093-97 Standard Practice for Preparation of Surfaces of Plastics Prior to Adhesive Bonding
- ASTM D957-95 Standard Practice for Determining Surface Temperature of Molds for Plastics
- ASTM D1044-99 Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion
- ASTM D957-95(2000)e1 Standard Practice for Determining Surface Temperature of Molds for Plastics
- ASTM D2093-03(2017) Standard Practice for Preparation of Surfaces of Plastics Prior to Adhesive Bonding
- ASTM B604-91(2003)e1 Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics
- ASTM B604-91(1997) Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics
- ASTM D1044-08 Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion
- ASTM D6105-04 Standard Practice for Application of Electrical Discharge Surface Treatment (Activation) of Plastics for Adhesive Bonding
- ASTM D1622-93 Standard Test Method for Apparent Density of Rigid Cellular Plastics
- ASTM B604-91(2008) Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics
- ASTM D957-12 Standard Practice for Determining Surface Temperature of Molds for Plastics
- ASTM D1622/D1622M-14 Standard Test Method for Apparent Density of Rigid Cellular Plastics
- ASTM D1044-05 Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion
- ASTM B604-91(2015) Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics
- ASTM D1044-13 Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion
- ASTM D1044-08e1 Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion
- ASTM D2290-04 Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe by Split Disk Method
- ASTM D2290-00e1 Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe by Split Disk Method
- ASTM D2290-00 Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe by Split Disk Method
- ASTM D2290-12 Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe
- ASTM D957-06 Standard Practice for Determining Surface Temperature of Molds for Plastics
- ASTM D957-95(2006)e1 Standard Practice for Determining Surface Temperature of Molds for Plastics
- ASTM D957-21 Standard Practice for Determining Surface Temperature of Molds for Plastics
- ASTM B533-85(2013) Standard Test Method for Peel Strength of Metal Electroplated Plastics
- ASTM D6105-04(2012) Standard Practice for Application of Electrical Discharge Surface Treatment (Activation) of Plastics for Adhesive Bonding
- ASTM D2093-03 Standard Practice for Preparation of Surfaces of Plastics Prior to Adhesive Bonding
- ASTM D2093-03(2011) Standard Practice for Preparation of Surfaces of Plastics Prior to Adhesive Bonding
- ASTM B533-85(2009) Standard Test Method for Peel Strength of Metal Electroplated Plastics
- ASTM D8280-20 Standard Test Method for Determination of the Blooming of Brominated Flame Retardants onto the Surface of Plastic Materials by Ion Chromatography
- ASTM D8280-20a Standard Test Method for Determination of the Blooming of Brominated Flame Retardants onto the Surface of Plastic Materials by Ion Chromatography
- ASTM D6105-97 Standard Practice for Application of Electrical Discharge Surface Treatment (Activation) of Plastics for Adhesive Bonding
- ASTM D1044-19 Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion by the Taber Abraser
- ASTM D6105-04(2019) Standard Practice for Application of Electrical Discharge Surface Treatment (Activation) of Plastics for Adhesive Bonding
- ASTM D2457-97 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics
- ASTM D2457-08 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics
- ASTM D2457-08e1 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics
- ASTM D2457-13 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, plastic watch glass
- GB/T 14234-1993 Surface roughness for plastic parts
- GB/T 31402-2015 Plastics.Measurement of antibacterial activity on plastics surfaces
- GB/T 2679.9-1993 Paper and board.Determination of roughness(Print-surface method)
- GB/T 21526-2008 Structural adhesives.Guidelines for the surface preparation of metals and plastics prior to adhesive bonding
- GB/T 10798-2001 Table of universal wall thickness of thermoplastics pipe
- GB/T 10798-2001(XG1-2003) Table of universal wall thickness of thermoplastics pipe
- GB/T 18839.2-2002 Preparation of steel substrates before application of paints and related products--Surface preparation methods--Abrasive blast-cleaning
- GB/T 4616-2008 Plastics.Phenolic moulding materials.Determination of acetone-soluble matter(apparent resin content of material in the unmoulded state)
- GB/T 8807-1988 Test method for specular gloss of plastics
- GB 8807-1988 Plastic Specular Gloss Test Method
- GB/T 18839.1-2002 Preparation of steel substrates before application of paints and related products--Surface preparation methods--General principles
- GB/T 1636-1979 Test method for apparent density of moulding plastic materials
Japanese Industrial Standards Committee (JISC), plastic watch glass
Military Standards (MIL-STD), plastic watch glass
Professional Standard - Chemical Industry, plastic watch glass
- HG/T 3078-2001 Surface characteristics for Rubber-or plastics-covered rollers
- HG/T 5178~5180-2017 Anti-corrosion coatings for metal surfaces under the insulation layer, coatings for the back of aluminum mirrors and water-based coatings for automotive plastic parts (2017)
Association Francaise de Normalisation, plastic watch glass
- NF B35-902:1983 Plastics laboratory ware. Beakers.
- NF T58-112:1971 Plastics materials. Surface coating of metals. Plastics coatings. Adhesion test.
- NF B35-903:1983 Plastics laboratory ware. Filter funnels.
- NF B35-904*NF EN ISO 24998:2009 Plastics laboratory ware - Single-use Petri dishes for microbiological procedures.
- NF T58-100:1971 Plastics materials. Surface coating of metals. Plastics coatings.(dry application). Specification.
- NF T54-370-3*NF EN ISO 19712-3:2022 Plastics - Decorative solid surfacing materials - Part 3 : determination of properties - Solid surface shapes
- NF T54-370-3:2013 Plastics - Decorative solid surfacing materials - Part 3: determination of properties - Solid surface shapes
- NF H35-007*NF EN 29885:1994 Wide-mouth glass containers. Deviation from flatness of top sealing surface. Test methods.
- NF EN 15347:2008 Plastiques - Plastiques recyclés - Caractérisation des déchets de plastiques
- NF EN ISO 19712-1:2013 Plastiques - Matériaux décoratifs massifs de revêtement de surface - Partie 1 : classification et spécifications
- NF B35-901:1983 Plastics laboratory ware. Graduated measuring cylinders.
- NF T58-110:1971 Plastics materials. Surface coating of metals. Plastics coatings. Methods of thickness determination.
- NF T50-100*NF EN ISO 472:2013 Plastics - Vocabulary
- NF EN 1905:1999 Systèmes de canalisations en plastique - Tubes, raccords et matières en poly(chlorure de vinyle) non plastifié (PVC-U) - Méthode d'évaluation de la teneur en PVC sur la base de la teneur totale en chlore.
- NF T54-370-1*NF EN ISO 19712-1:2013 Plastics - Decorative solid surfacing materials - Part 1 : classification and specifications
- NF T54-370-2*NF EN ISO 19712-2:2013 Plastics - Decorative solid surfacing materials - Part 2 : determination of properties - Sheet goods
- NF P16-367*NF EN 14802:2006 Plastics piping systems - Plastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading
- NF EN ISO 24998:2009 Matériel de laboratoire en matière plastique - Boîtes de Petri à usage unique pour méthodes microbiologiques
- NF EN ISO 19712-3:2022 Plastiques - Matériaux décoratifs massifs de revêtement de surface - Partie 3 : détermination des propriétés - Produits mis en forme
- NF EN ISO 19712-2:2013 Plastiques - Matériaux décoratifs massifs de revêtement de surface - Partie 2 : détermination des propriétés - Produits en feuilles
- NF EN 15344:2021 Plastiques - Plastiques recyclés - Caractérisation des recyclats de polyéthylène (PE)
- NF EN 15345:2008 Plastiques - Plastiques recyclés - Caractérisation des recyclats de polypropylène (PP)
- NF B35-300*NF EN ISO 384:2016 Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments
- NF EN ISO 384:2016 Matériels de laboratoire en verre ou en plastique - Principes de conception et de construction d'instruments volumétriques
- NF EN 17615:2022 Plastiques - Aspects environnementaux - Vocabulaire
- NF EN 15346:2014 Plastiques - Plastiques recyclés - Caractérisation des recyclats de poly(chlorure de vinyle) (PVC)
- NF EN 15342:2008 Plastiques - Plastiques recyclés - Caractérisation des recyclats de polystyrène (PS)
- NF B35-309*NF EN ISO 4787:2021 Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use
- NF T51-192*NF EN 16795:2016 Plastics - Method for estimating heat build up of flat surfaces by simulated solar radiation
- NF EN 13887:2004 Adhésifs structuraux - Guide pour la préparation de surface des métaux et des plastiques avant le collage par adhésif
- NF ISO 9782:1994 Plastiques renforcés - Compositions pour moulage et préimprégnés - Détermination de la teneur apparente en matières volatiles.
- NF T76-204*NF EN 13887:2004 Structural adhesives - Guidelines for surface preparation of metals and plastics prior to adhesive bonding
- NF EN ISO 2286-2:2016 Supports textiles revêtus de caoutchouc ou de plastique - Détermination des caractéristiques des rouleaux - Partie 2 : méthodes de détermination de la masse surfacique totale, de la masse surfacique du revêtement et de la masse surfacique du support
- NF T57-511*NF EN ISO 10352:2020 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area
- NF T73-402:1967 Surface active agents. Determination of apparent density of pastes.
- NF EN ISO 4787:2021 Verrerie et matériel en plastique de laboratoire - Instruments volumétriques - Méthodes d'essai de la capacité et d'utilisation
- NF B30-108-1:1989 Glassware. Hydrolytic resistance of the interior surfaces of glass containers. Part 1 : determination by titration method and classification.
- NF P90-131*NF EN 12230:2003 Surfaces for sports areas - Determination of tensile properties of synthetic sports areas
Malaysia Standards, plastic watch glass
British Standards Institution (BSI), plastic watch glass
- BS ISO 5215:2022 Laboratory plastic ware. Volumetric flasks
- BS 5452:1977 Specification for hospital hollow-ware made of plastics material
- BS 7864:1997 Specification for plastics containers for surface coatings
- BS EN ISO 24998:2010 Plastics laboratory ware. Single-use Petri dishes for microbiological procedures
- BS EN ISO 24998:2008 Plastics laboratory ware - Single-use Petri dishes for microbiological procedures
- BS EN ISO 19712-3:2013 Plastics - Decorative solid surfacing materials - Determination of properties - Solid surface shapes
- BS ISO 19712-1:2009 Plastics. Decorative solid surfacing materials. Classification and specifications
- BS EN ISO 19712-1:2013 Plastics. Decorative solid surfacing materials. Classification and specifications
- BS 611-2:1990 Petri dishes - Specification for plastics Petri dishes for single use
- BS EN ISO 19712-2:2013 Plastics - Decorative solid surfacing materials - Determination of properties - Sheet goods
- BS ISO 6123-2:2015 Rubber or plastics covered rollers. Specifications. Surface characteristics
- BS ISO 8296:2003 Plastics - Film and sheeting - Determination of wetting tension
- BS EN ISO 472:2000 Plastics. Vocabulary
- BS EN ISO 472:2013 Plastics. Vocabulary
- BS ISO 12771:1997 Plastics laboratory ware - Disposable serological pipettes
- BS ISO 21702:2019 Measurement of antiviral activity on plastics and other non-porous surfaces
- 22/30448009 DC BS EN 15347. Plastics. Recycled plastics. Characterisation of sorted plastics wastes
- BS 3262-3:1989 Hot-applied thermoplastic road marking materials - Specification for application of material to road surfaces
- BS ISO 4065:1997 Thermoplastics pipes - Universal wall thickness table
- BS ISO 22196:2011 Measurement of antibacterial activity on plastics and other non-porous surfaces
- BS EN ISO 384:2015 Laboratory glass and plastics ware. Principles of design and construction of volumetric instruments
- BS 7442-4.2:1994 Rubber or plastics covered rollers - Requirements - Classification by surface finish
- 21/30443624 DC BS EN 16592. Packaging. Rigid plastic containers. PET finish 29/25 (12,6)
- BS EN ISO 19712-3:2022 Tracked Changes. Plastics. Decorative solid surfacing materials. Determination of properties. Solid surface shapes
- BS ISO 4065:2018 Thermoplastics pipes. Universal wall thickness table
- BS EN 16592:2022 Tracked Changes. Packaging. Rigid plastic containers. PET finish 29/25 (12,6)
- BS ISO 4768:2023 Measurement method of anti-biofilm activity on plastic and other non-porous surface
- BS ISO 4802-1:2010 Glassware - Hydrolytic resistance of the interior surfaces of glass containers - Determination by titration method and classification
- BS ISO 14309:2019 Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of volume and/or surface resistivity
- BS 7722:2002 Surface covered PVC-U profiles for windows and doors - Specification
- BS 7722:2010 Surface covered PVC-U profiles for windows and doorsets - Specification
- BS EN 17615:2022 Plastics. Environmental Aspects. Vocabulary
- BS ISO 4802-2:2010 Glassware - Hydrolytic resistance of the interior surfaces of glass containers - Determination by flame spectrometry and classification
- BS ISO 4802-2:2016 Glassware. Hydrolytic resistance of the interior surfaces of glass containers. Determination by flame spectrometry and classification
- BS EN 13887:2003 Structural adhesives - Guidelines for surface preparation of metals and plastics prior to adhesive bonding
- 20/30409101 DC BS EN 15344. Plastics. Recycled plastics. Characterisation of Polyethylene (PE) recyclates
- BS EN 2563:1997 Carbon fibre reinforced plastics - Unidirectional laminates - Determination of the apparent interlaminar shear strength
- 22/30453265 DC BS EN 15346. Plastics. Recycled plastics. Characterization of poly(vinyl chloride) (PVC) recyclates
- BS EN 15344:2021 Tracked Changes. Plastics. Recycled plastics. Characterization of Polyethylene (PE) recyclates
- BS 4618 Sec.2.4:1975 Recommendations for the presentation of plastics design data. Electrical properties. Surface resistivity
- BS EN 14700:2014 Welding consumables. Welding consumables for hard-facing
- BS EN 16795:2015 Plastics. Method for estimating heat build up of flat surfaces by simulated solar radiation
- BS ISO 18852:2012 Rubber compounding ingredients. Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)
- BS ISO 18852:2015 Rubber compounding ingredients. Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)
- BS ISO 19095-2:2015 Plastics. Evaluation of the adhesion interface performance in plastic-metal assemblies. Test specimens
- 18/30383428 DC BS ISO 17880.2. Cellular plastics. Self-supporting metal faced sandwich panels. Cellular plastics
- BS ISO 19095-5:2023 Plastics. Evaluation of the adhesion interface performance in plastic-metal assemblies - Fracture energy
- BS EN ISO 10352:2020 Fibre-reinforced plastics. Moulding compounds and prepregs. Determination of mass per unit area and fibre mass per unit area
- BS ISO 4802-1:2016 Tracked Changes. Glassware. Hydrolytic resistance of the interior surfaces of glass containers. Determination by titration method and classification
YU-JUS, plastic watch glass
- JUS B.E4.216-1987 Laboratoryglassware and accessories. I/Vatch glasses. Quality requirements
- JUS G.S2.740-1996 Plastics - Optical properties of thermoplastic films - Determination of specular gloss of plastic films
Professional Standard - Commodity Inspection, plastic watch glass
- SN/T 1877.5-2009 Determination of polycyclic aromatic hydrocarbons in metalware surface
国家质量监督检验检疫总局, plastic watch glass
- SN/T 1877.5-2017 Determination of polycyclic aromatic hydrocarbons on the surface of metal utensils
GM North America, plastic watch glass
Standard Association of Australia （SAA）, plastic watch glass
- AS 2766:1997 Petri dishes - Plastic - For single use
- AS/NZS 4257.10:1997 Plastic roof and wall cladding materials - Methods of test - Determination of surface distortion (oil canning)
- AS 2122.1:1993 Combustion characteristics of plastics - Determination of flame propagation - Surface ignition of vertically oriented specimens of cellular plastics
- AS 1157.11:1999 Methods of testing materials for resistance to fungal growth - Resistance of rubbers and plastics to surface fungal growth
- AS 1886/SUPP 1:1994 Glossary of terms relating to plastics - Plastics recycling terminology (Supplement to AS 1886-1991)
- AS 4256.4:2006 Plastic roof and wall cladding materials - Unplasticized polyvinyl chloride (uPVC) wall cladding boards
- AS 4049.2:2005 Paints and related materials - Pavement marking materials - Thermoplastic pavement marking materials - For use with surface applied glass beads
- AS 1886:1991 Glossary of terms relating to plastics
- AS 3558.4:1999 Methods of testing plastics and composite materials sanitary plumbing fixtures - Determination of resistance to surface scratching
- AS 3558.23:1999 Methods of testing plastics and composite materials sanitary plumbing fixtures - Determination of resistance to heat of the surface of sinks
European Committee for Standardization (CEN), plastic watch glass
- EN ISO 24998:2008 Plastics laboratory ware - Single-use Petri dishes for microbiological procedures
- EN ISO 19712-3:2013 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes
- EN ISO 19712-3:2022 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2022)
- EN ISO 19712-1:2013 Plastics - Decorative solid surfacing materials - Part 1: Classification and specifications
- EN 13887:2003 Structural adhesives - Guidelines for surface preparation of metals and plastics prior to adhesive bonding
- EN 1394:1996 Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes - Determination of the Apparent Initial Circumferential Tensile Strength (Incorporating Corrigendum November 1997)
- EN ISO 19712-2:2013 Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods
- prEN 17615-2020 Plastics - Environmental Aspects - Vocabulary
- prEN 15342 rev Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates
- EN 16795:2015 Plastics - Method for estimating heat build up of flat surfaces by simulated solar radiation
- EN 14802:2005 Plastics piping systems - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading
Group Standards of the People's Republic of China, plastic watch glass
PT-IPQ, plastic watch glass
ES-UNE, plastic watch glass
- UNE-EN ISO 19712-3:2022 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2022)
- UNE-EN 16592:2023 Packaging - Rigid plastic containers - PET finish 29/25 (12,6)
- UNE-EN 1388-2:1995 Materials and articles in contact with foodstuffs - Silicate surfaces - Part 2: Determination of the release of lead and cadmium from silicate surfaces other than ceramic ware
- UNE-EN 15344:2022 Plastics - Recycled plastics - Characterization of Polyethylene (PE) recyclates
- UNE-EN 17615:2023 Plastics - Environmental Aspects - Vocabulary
- UNE-EN 1388-1:1995 Materials and articles in contact with foodstuffs - Silicate surfaces - Part 1: Determination of the release of lead and cadmium from ceramic ware (Endorsed by AENOR in February of 1996.)
- UNE-EN ISO 4787:2021 Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2021) (Endorsed by Asociación Española de Normalización in February of 2022.)
- UNE-EN 16795:2016 Plastics - Method for estimating heat build up of flat surfaces by simulated solar radiation
- UNE-EN ISO 10352:2021 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020)
- ISO/PRF 4802-1:2023 Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 1: Determination by titration method and classification
Danish Standards Foundation, plastic watch glass
- DS 2125:1989 Plastics pipes. Measurement of dimensions. Visual inspection of surfaces
- DS/EN ISO 19712-3:2013 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes
- DS/EN 15347:2008 Plastics - Recycled Plastics - Characterisation of plastics wastes
- DS/EN ISO 19712-1:2013 Plastics - Decorative solid surfacing materials - Part 1: Classification and specifications
- DS/EN ISO 24998:2009 Plastics laboratory ware - Single-use Petri dishes for microbiological procedures
- DS/EN ISO 19712-2:2013 Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods
- DS/ISO 6123/2:1984 Rubber or plastic covered rollers. Specifications. Part 2: Classification of surface characteristics
- DS/EN 16063:2012 Packaging - Rigid plastic containers - Nomenclature of plastic finishes
- DS/EN 15344:2008 Plastics - Recycled Plastics - Characterisation of Polyethylene (PE) recyclates
- DS/EN 15345:2008 Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates
- DS/EN 15344:2021 Plastics – Recycled plastics – Characterization of Polyethylene (PE) recyclates
- DS/EN 14802:2006 Plastics piping systems - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading
- DS/EN 15342:2008 Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates
- DS/EN 15346:2008 Plastics - Recycled plastics - Characterisation of poly(vinyl chloride) (PVC) recyclates
- DS/EN 13887:2003 Structural Adhesives - Guidelines for surface preparation of metals and plastics prior to adhesive bonding
- DS/CEN/TR 15932:2010 Plastics - Recommendation for terminology and characterisation of biopolymers and bioplastics
- DS/EN ISO 10352:2011 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area
- DS/ISO 4802-1:2010 Glassware - Hydrolytic resistance of the interior surfaces of glass containers - Part 1: Determination by titration method and classification
未注明发布机构, plastic watch glass
- DIN EN 14877:2006 Plastic surfaces on outdoor sports facilities – requirements
- BS EN 1388-2:1996(2004) Materials and articles in contact with foodstuffs — Silicate surfaces — Part 2 : Determination of the release of lead and cadmium from silicate surfaces other than ceramic ware
- DIN EN ISO 19712-3:2022 Plastics – Decorative solid surface materials – Part 3: Test methods – Molded parts
- BS ISO 4065:2018(2020) Thermoplastics pipes — Universal wall thickness table
- BS EN 1388-1:1996(2004) Materials and articles in contact with foodstuffs — Silicate surfaces — Part 1 : Determination of the release of lead and cadmium from ceramic ware
Lithuanian Standards Office , plastic watch glass
- LST EN ISO 24998:2009 Plastics laboratory ware - Single-use Petri dishes for microbiological procedures (ISO 24998:2008)
- LST EN 15347-2008 Plastics - Recycled Plastics - Characterisation of plastics wastes
- LST EN 16063-2012 Packaging - Rigid plastic containers - Nomenclature of plastic finishes
- LST EN 15344-2021 Plastics - Recycled plastics - Characterization of Polyethylene (PE) recyclates
- LST EN 15345-2008 Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates
- LST EN 15344-2008 Plastics - Recycled Plastics - Characterisation of Polyethylene (PE) recyclates
- LST EN 14802-2006 Plastics piping systems - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading
- LST EN 15346-2008 Plastics - Recycled plastics - Characterisation of poly(vinyl chloride) (PVC) recyclates
- LST EN 15342-2008 Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates
- LST EN 13887-2004 Structural Adhesives - Guidelines for surface preparation of metals and plastics prior to adhesive bonding
- LST EN 14700-2014 Welding consumables - Welding consumables for hard-facing
AENOR, plastic watch glass
- UNE-EN ISO 24998:2009 Plastics laboratory ware - Single-use Petri dishes for microbiological procedures (ISO 24998:2008)
- UNE-EN 15347:2008 Plastics - Recycled Plastics - Characterisation of plastics wastes
- UNE-EN ISO 19712-3:2013 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2007)
- UNE 53036:2001 Plastics. Determination of specular gloss of plastic materials.
- UNE 53248:1975 PLASTICS. DETERMINATION OF LATENT TENSIONS IN MOULDED PIECES WITH POLYOLEFINES BY THE ACTION OF SURFACE-ACTIVE AGENTS.
- UNE-EN 16063:2012 Packaging - Rigid plastic containers - Nomenclature of plastic finishes
- UNE-EN ISO 19712-1:2013 Plastics - Decorative solid surfacing materials - Part 1: Classification and specifications (ISO 19712-1:2008)
- UNE-EN 15344:2008 Plastics - Recycled Plastics - Characterisation of Polyethylene (PE) recyclates
- UNE-EN 15345:2008 Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates
- UNE-EN 14802:2006 Plastics piping systems - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading
- UNE-EN 15342:2008 Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates
- UNE-EN 15346:2015 Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates
- UNE-EN ISO 19712-2:2013 Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007)
- UNE-EN 13887:2004 Structural Adhesives - Guidelines for surface preparation of metals and plastics prior to adhesive bonding
- UNE-CEN/TR 15932:2010 IN Plastics - Recommendation for terminology and characterisation of biopolymers and bioplastics
CH-SNV, plastic watch glass
- SN ISO 9003:1988 Quality Systems - Model for quality assurance in final inspection and test
- SN EN 15344-2021 Plastics - Recycled plastics - Characterization of Polyethylene (PE) recyclates
ES-AENOR, plastic watch glass
PL-PKN, plastic watch glass
- PN H77100-1964 Articles de menage Ustensiles en fonte, emailles Specifications techn?ques
- PN-EN 15344-2021-10 E Plastics--Recycled plastics--Characterisation of Polyethylene (PE) recyclates
- PN C89046-1992 Plastics. Determination of apparent density of rigid cellular materials
HU-MSZT, plastic watch glass
NL-NEN, plastic watch glass
- NEN 3366-1967 Determination of surf ace resistance and insulation resistance of hard plastics
General Motors Corporation (GM), plastic watch glass
IT-UNI, plastic watch glass
Professional Standard-Ships, plastic watch glass
SE-SIS, plastic watch glass
- SIS SS 3551-1986 Plastics pipes and fittings — Measurement of dimensions and visualinspection of surfaces
- SIS SS 16 11 43-1982 Plastics - Determination of apparent bulk density of compacted moulding material
Professional Standard - Aviation, plastic watch glass
- HB 6841-1993 Technical requirements and evaluation methods of plastic mold cavity surface roughness samples and plastic samples
RU-GOST R, plastic watch glass
- GOST 25209-1982 Plastics and polymer films. Methods for the determination of surface charges of electrets
- GOST 409-1977 Plastics cellular and rubber cellular. Method for determination of apparent density
- GOST 18296-1972 Surface working. Terms and definitions
KR-KS, plastic watch glass
国家市场监督管理总局、中国国家标准化管理委员会, plastic watch glass
- GB/T 39697.2-2020 Rubber or plastics covered rollers—Specifications—Part 2：Surface characteristics
US-FCR, plastic watch glass
U.S. Military Regulations and Norms, plastic watch glass
American Water Works Association (AWWA), plastic watch glass
(U.S.) Ford Automotive Standards, plastic watch glass
- FORD M3D24-A-1990 EPOXY THERMOSETTING RESIN AND HARDENER - PLASTIC TOOL SURFACE COATING
- FORD WSB-M2G357-A-2015 PRIMER, ADHESION, PLASTIC TRIM SURFACES, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESB-M99P14-A3-1985 PAD PRINTING, FIRST SURFACE PLASTIC OR PAINTED PLASTIC, EXTERIOR
- FORD WSB-M2G368-A-2015 PRIMER, ADHESION, PLASTIC TRIM SURFACES, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESB-M2P18-A-2006 PAINT PERFORMANCE, EXTERIOR - SECOND SURFACE PAINTED PLASTICS ***TO BE USED WITH FORD WSS-M99P1111-A***
Professional Standard - Electron, plastic watch glass
- SJ/T 10387-1993 General specification for SDC series treater for plastic surface corona treating
United States Navy, plastic watch glass
CZ-CSN, plastic watch glass
ZA-SANS, plastic watch glass
GM Daewoo, plastic watch glass
- GMKOREA EDS-T-7701-2011 Determination of Resistance to Stone Impact of Surface Coatings, Plastics and Self Adhesive Film
AT-ON, plastic watch glass
PH-BPS, plastic watch glass
- PNS ISO 384:2021 Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments
VN-TCVN, plastic watch glass
BE-NBN, plastic watch glass
- NBN T 63-305-1986 Surface active agents - Detergents for domestic machine dishwashing-Guide for comparative testing of performance
- NBN 451-1957
- NBN T 41-005-1974 Textile glass reinforced plastics — Détermination of the apparent modulus of rigidity by torsion.
- NBN-EN 22286-1993 Rubber- or plastics-coated fabrics. Determination of roll characteristics (ISO 2286: 1986)
IX-SA, plastic watch glass
IN-BIS, plastic watch glass
AWS - American Welding Society, plastic watch glass
- C4.1G- Oxygen Cutting Surface Roughness Gauge (Plastic) (See also AWS C4.1 Set and AWS C4.1-WC)
IPC - Association Connecting Electronics Industries, plastic watch glass
- IPC J-STD-020-1996 Moisture/Reflow Sensitivity Classification for Plastic Integrated Circuit Surface Mount Devices
Professional Standard - Light Industry, plastic watch glass
IFI/FASTNR - Industrial Fastener Institute, plastic watch glass
- 120-1971 Glossary of Terms Relating to Plastic Fasteners
- 120-1995 Glossary of Terms Relating to Plastic Fasteners
American National Standards Institute （ANSI), plastic watch glass
Defense Logistics Agency, plastic watch glass
- DLA MIL-PRF-19978 J SUPP 1-2003 CAPACITORS, FIXED, PLASTIC (OR PAPER-PLASTIC) DIELECTRIC (HERMETICALLY SEALED IN METAL, CERAMIC OR GLASS CASES), ESTABLISHED AND NON-ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
- DLA MIL-PRF-19978 J-2003 CAPACITORS, FIXED, PLASTIC (OR PAPER-PLASTIC) DIELECTRIC (HERMETICALLY SEALED IN METAL, CERAMIC OR GLASS CASES), ESTABLISHED AND NON-ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
Professional Standard - Traffic, plastic watch glass
- JT/T 821.2-2011 Anti-corrosive coatings for concrete bridge surface.Part 2:Wet-surface tolerant coatings
AASHTO - American Association of State Highway and Transportation Officials, plastic watch glass
GM Holden Ltd, plastic watch glass
- HOLDEN HN 2430-2003 SURFACE PREPARATION PRIOR TO PAINTING OF EXTERIOR POLYPROPYLENE / EPDM PLASTIC PARTS
VE-FONDONORMA, plastic watch glass
UY-UNIT, plastic watch glass
Underwriters Laboratories (UL), plastic watch glass
BHMA - Builders Hardware Manufacturers Association Inc., plastic watch glass
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, plastic watch glass
- GB/T 34445-2017 Test method of hot-tack property for heat sealing surfaces of thermoplastic polymer and thermoplastic composite material
- GB/T 33498-2017 Surface chemical analysis—Characterization of nanostructured materials
NZ-SNZ, plastic watch glass
- AS/NZS 4256.4:1995 Plastic Roof and Wall Cladding Materials Part 4: Unplasticized Polyvinyl Chloride (uPVC) Wall Cladding Boards
Association of German Mechanical Engineers, plastic watch glass