ZH
RU
ES

Thermosetting Resin Analysis

Thermosetting Resin Analysis, Total:498 items.

In the international standard classification, Thermosetting Resin Analysis involves: Plastics, Products of the chemical industry, Interior finishing, Analytical chemistry, Protection of and in buildings, Reinforced plastics, Paints and varnishes, Materials and components for railway engineering, Pipeline components and pipelines, Rubber and plastics products, Small craft, Insulating materials, Fluid power systems, Wood-based panels, Elements of buildings, Materials for aerospace construction, Fluid storage devices, External sewage systems, Farming and forestry, Equipment for the chemical industry, Storage equipment, Dentistry, Organic chemicals, Electrical accessories, Railway rolling stock, Shipbuilding and marine structures in general, Wind turbine systems and other alternative sources of energy, Surface treatment and coating, External water conveyance systems, Vocabularies, Water quality.

Association Francaise de Normalisation, Thermosetting Resin Analysis

NF L17-451:1988 Aéronautique et espace - Préimprégnés de résine thermodurcissable - Analyse thermique différentielle - Méthode d'essai.
NF F19-478:1989 Rolling stock. Thermo setting powder paints made of epoxy resins.
NF EN ISO 9771:1997 Plastiques - Résines phénoliques - Détermination de l'élévation de température pseudoadiabatique des résols liquides thermodurcis en conditions acides.
NF J95-046-1:2001 Small craft - Hull construction and scantlings - Part 1 : materials : thermosetting resins, glass-fibre reinforcement, reference laminate.
NF F19-477:1991 Railway rolling stock. Thermo setting powder paints made of polyester resins.
NF T51-506:2011 Plastics - Thermosetting resins - Analysis by liquid chromatography (HPLC)
NF T30-499-8:2011 Coating powders - Part 8 : assessment of the storage stability of thermosetting powders.
NF T30-499-8*NF EN ISO 8130-8:2021 Coating powders - Part 8 : assessment of the storage stability of thermosetting powders
NF L17-452:1988 Aerospace. Fabric pre-impregnated with thermosetting resin. Perpendicular tensile resistance test.
NF S91-211-2*NF EN ISO 9917-2:2017 Dentistry - Water-based cements - Part 2 : resin-modified cements
NF C26-183-6/A2*NF EN IEC 60893-3-6/A2:2018 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6 : specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
NF EN ISO 3673-2:2012 Plastiques - Résines époxydes - Partie 2 : préparation des éprouvettes et détermination des propriétés des résines époxydes réticulées
NF EN 2833-005:2014 Série aérospatiale - Préimprégnés de verre textile/résine thermodurcissable - Spécification technique - Partie 005 : verre textile/résine phénolique préimprégnés
NF L17-455:1988 Aéronautique et espace - Matériaux composites à base de préimprégnés de résine thermodurcissable - Résistance au pelage.
NF F31-447:1989 Rolling stock. Laminated panels with decorated surface, made of thermosetting resins.
NF C26-183-2*NF EN 60893-3-2:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2 : specification for individual materials - Requirements for rigid laminated sheets based on epoxy resins.
NF C26-183-3*NF EN 60893-3-3:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3 : specification for individual materials - Requirements for rigid laminated sheets based on melamine resins
NF C26-183-6/A1*NF EN 60893-3-6/A1:2010 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6 : Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins.
NF C26-183-5/A1*NF EN 60893-3-5/A1:2009 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5 : Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins
NF C26-183-2/A1*NF EN 60893-3-2/A1:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2 : specification for individual materials - Requirements for rigid laminated sheets based on epoxy resins
NF EN 60893-2:2004 Matériaux isolants - Stratifiés industriels rigides en planches à base de résines thermodurcissables à usages électriques - Partie 2 : méthodes d'essai
NF C26-183-4/A1*NF EN 60893-3-4/A1:2013 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4 : specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins
NF C26-183-7/A1*NF EN 60893-3-7/A1:2010 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7 : Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins.
NF T54-301-1:1991 Decorative high-pressure laminates (hpl). Sheets based on thermosetting resins. Part 1 : specifications.
XP PR EN 2833-1:1995 Série aérospatiale - Préimprégnés de verre textile/résine thermodurcissable - Spécification technique - Partie 1 : généralités.
NF T54-301-2:1991 Decorative high-pressure laminates (hpl). Sheets based on thermosetting resins. Part 2 : determination of properties.
XP PR EN 2833-2:1995 Série aérospatiale - Préimprégnés de verre textile/résine thermodurcissable - Spécification technique - Partie 2 : verre textile/résine époxy préimprégnée avec une température de polymérisation jusqu'à 125 degrés Celsius utilisation co...
NF C26-182:1994 Specification for industrial rigide laminated sheets based on thermosetting resins for electrical purposes. Part 2 : methods of test.
NF C26-183-6*NF EN 60893-3-6:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6 : specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
NF EN 438-1:2016 Stratifiés décoratifs haute pression (HPL) - Plaques à base de résines thermodurcissables (communément appelées stratifiés) - Partie 1 : introduction et informations générales
NF C26-182*NF EN 60893-2:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 2 : methods of test
NF T54-301-2:2005 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2 : determination of properties.
NF T54-301-2:2016 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2 : determination of properties
NF EN 438-2+A1:2018 Stratifiés décoratifs haute pression (HPL) - Plaques à base de résines thermodurcissables (communément appelées stratifiés) - Partie 2 : détermination des propriétés
NF EN 438-2/IN1:2016 Stratifiés décoratifs haute pression (HPL) - Plaques à base de résines thermodurcissables (communément appelées stratifiés) - Partie 2 : détermination des propriétés

Society of Automotive Engineers (SAE), Thermosetting Resin Analysis

SAE ARP5144-2011 Heat Application for Thermosetting Resin Curing
SAE AMS3727A-1993 RESIN, EPOXY, MATRIX, THERMOSETTING Moderate Temperature Resistant, Unfilled
SAE AMS3727-1988 RESIN, EPOXY, MATRIX, THERMOSETTING Moderate Temperature Resistant, Unfilled
SAE AMS3731/9-1981 POTTING COMPOUND, EPOXY Flexible, Thermal Shock Resistant, Heat Cure
SAE AMS3731/9A-1987 POTTING COMPOUND, EPOXY Flexible, Thermal Shock Resistant, Heat Cure
SAE AMS3729A-2022 Epoxy Resin Matrix, Thermosetting Moderate Temperature Resistant, Unfilled
SAE AMS3642C-2011 PLASTIC MOLDINGS, LAMINATED, THERMOSETTING RESIN Glass Cloth Reinforced Heat Resistant
SAE AMS3642D-1998 Plastic Moldings, Laminated, Thermosetting Resin Glass Cloth Reinforced Heat Resistant
SAE AMS3731/9B-1993 (Noncurrent)Potting Compound, Epoxy Flexible, Thermal Shock Resistant, Heat Cure
SAE AMS3729-2011 EPOXY RESIN MATRIX, THERMOSETTING Moderate Temperature Resistant, Unfilled
SAE AMS3641A-1953 PLASTIC MOLDINGS, THERMOSETTING Phenol Formaldehyde, Macerated Fabric Filled
SAE AMS3642-1961 PLASTIC MOLDINGS, LAMINATED, THERMOSETTING RESIN, Glass Fabric Reinforced Heat Resistant (500 F)
SAE AMS3642A-1965 PLASTIC MOLDINGS, LAMINATED, THERMOSETTING RESIN Glass Fabric Reinforced Heat Resistant, 500 F (260 C)
SAE AMS3642B-1976 PLASTIC MOLDINGS, LAMINATED, THERMOSETTING RESIN Glass Fabric Reinforced Heat Resistant, 500°F (260°C)
SAE AMS3728A-1994 Epoxy Cresol Novolac Resin Low Molecular Weight
SAE AMS3731/4A-2011 POTTING COMPOUND, EPOXY Bisphenol A-Type Impregnating Resin, Heat Cure, Single Component
SAE AMS3731/4-1981 POTTING COMPOUND, EPOXY Bisphenol A-Type Impregnating Resin, Heat Cure, Single Component
SAE ARP4916-1997 Masking and Cleaning of Epoxy and Polyester Matrix Thermosetting Composite Materials
SAE AMS3618-1970 (Noncurrent)Resin, Polyimide, Thermosetting High Heat (290 C (554 F) Resistant) R(1994)
SAE ARP4916-2011 MASKING AND CLEANING OF EPOXY AND POLYESTER MATRIX THERMOSETTING COMPOSITE MATERIALS
SAE AMS3733A-2011 POTTING COMPOUND, EPOXY Two Part, Highly Filled, Heat Cure, High Compressive Strength
SAE AMS3733-1987 POTTING COMPOUND, EPOXY Two Part, Highly Filled, Heat Cure, High Compressive Strength
SAE AMS3731/4B-1993 (Noncurrent)Potting Compound, Epoxy Bisphenol A-Type Impregnating Resin, Heat Cure, Single Component

SAE - SAE International, Thermosetting Resin Analysis

SAE ARP5144A-2017 Heat Application for Thermosetting Resin Curing
SAE AMS3727B-1995 RESIN@ EPOXY@ MATRIX@ THERMOSETTING MODERATE TEMPERATURE RESISTANT@ UNFILLED
SAE AMS3731/9C-2016 Potting Compound@ Epoxy Flexible@ Thermal Shock Resistant@ Heat Cure
SAE AMS3618-1985 Resin@ Polyimide@ Thermosetting High Heat (290 C (554 F) Resistant)
SAE AMS3618A-1996 Resin@ Polyimide@ Thermosetting High Heat (290 °C (554 °F) Resistant)
SAE AMS3732B-2015 Potting Compound@ Epoxy One Part@ Filled@ Heat Cure@ Low CTE
SAE AMS3731/4C-2016 Potting Compound@ Epoxy Bisphenol A-Type Impregnating Resin@ Heat Cure@ Single Component
SAE AMS3733C-2015 Potting Compound@ Epoxy Two Part@ Highly Filled@ Heat Cure@ High Compressive Strength

Korean Agency for Technology and Standards (KATS), Thermosetting Resin Analysis

KS M 3337-2009 Laminated thermosetting sheets
KS M 3338-2008 Laminated thermosetting rods
KS M 3339-2012 Laminated thermosetting tubes
KS F 4740-2007 Thermosetting plastic ceiling tile
KS F 4740-1999 Thermosetting plastic ceiling tile
KS M 3332-2009 Testing methods laminated thermosetting high-pressure decorative sheets
KS M 3332-1982 Testing methods laminated thermosetting high-pressure decorative sheets
KS M 3550-7-2015 Cured-in-place thermosetting resin tube for renovation of potable water piping system
KS M 3550-7-2013 Cured-in-place thermosetting resin tube for renovation of potable water piping system
KS M ISO 4586-2:2013 High-pressure decorative laminates — Sheets made from thermosetting resins — Part 2: Determination of properties
KS M ISO 4586-2:2007 High-pressure decorative laminates-Sheets made from thermosetting resins-Part 2:Determination of properties
KS M 3550-9-2016 Cured-in-place thermosetting resin tube for renovation of sewer piping system
KS M 3550-9-2013 Cured-in-place thermosetting resin tube for renovation of sewer piping system
KS M ISO 4586-1-2012(2017) High-pressure decorative laminates－Sheets made from thermosetting resins－Part 1：Classification and specifications
KS M 3550-9-2016(2021) Cured-in-place thermosetting resin tube for renovation of sewer piping system
KS M ISO 4586-1-2012(2022) High-pressure decorative laminates－Sheets made from thermosetting resins－Part 1：Classification and specifications
KS M 3550-7-2019 Cured-in-place thermosetting resin tube for renovation of potable water piping system
KS C IEC 60893-2:2003 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes-Part 2:Methods of test
KS V ISO 15840-2006(2021) Standard specification for thermosetting resin fiberglass pipe and fittings to be used for marine applications
KS M ISO 4586-2-2013(2018) High-pressure decorative laminates — Sheets made from thermosetting resins — Part 2: Determination of properties
KS C IEC 61212-2:2008 Insulating materials-Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes -Part 2:Methods of test
KS M 3500-7-2013 Cured--in--place thermosetting resin tube for renovation of potable water piping system
KS V ISO 15840:2006 Standard specification for thermosetting resin fiberglass pipe and fittings to be used for marine applications
KS C IEC 60893-2-2015(2020) Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes－Part 2：Methods of test
KS C IEC 60893-3-2:2003 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes-Part 3:Specifications for individual materials-Sheet 2:Requirements for rigid laminated sheets based on epoxide resins
KS C IEC 60893-3-3:2003 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes-Part 3:Specifications for individual materials-Sheet 3:Requirements for rigid laminated sheets based on melamine resins
KS M ISO 4586-1:2012 High-pressure decorative laminates－Sheets made from thermosetting resins－Part 1：Classification and specifications
KS C IEC 61212-1:2008 Insulating materials－Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes－Part 1：General requirements
KS C IEC 60893-3-6:2003 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes-Part 3:Specifications for individual materials-Sheet 6:Requirements for rigid laminated sheets based on silicone resins
KS C IEC 60893-3-6-2015(2020) Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes－Part 3：Specifications for individual materials－Sheet 6：Requirements for rigid laminated sheets
KS C IEC 60893-3-6:2015 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes－Part 3：Specifications for individual materials－Sheet 6：Requirements for rigid laminated sheets based on silicone resins
KS C IEC 60893-3-3:2018 Insulating materials — Industrial rigid laminated sheets based on thermosetting resins for electrical purposes — Part 3-3: Specifications for individual materials — Requirement for rigid laminated she
KS C IEC 60893-3-4:2018 Insulating materials — Industrial rigid laminated sheets based on thermosetting resins for electrical purposes — Part 3-4: Specifications for individual materials — Requirement for rigid laminated she
KS C IEC 60893-3-7:2003 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes-Part 3:Specifications for individual materials-Sheet 7:Requirements for rigid laminated sheets based on polyimide resins
KS C IEC 60893-3-7:2015 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes－Part 3：Specifications for individual materials－Sheet 7：Requirements for rigid laminated sheets based on polyimide resins
KS C IEC 60893-3-5:2003 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes-Part 3:Specifications for individual materials-Sheet 5:Requirements for rigid laminated sheets based on polyester resins
KS C IEC 60893-3-4:2003 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes－Part 3：Specifications for individual materials－Sheet 4：Requirements for rigid laminated sheets based on phenolic resins
KS C IEC 60893-3-5-2015(2020) Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes－Part 3：Specifications for individual materials－Sheet 5：Requirements for rigid laminated sheets
KS C IEC 60893-3-5:2015 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes－Part 3：Specifications for individual materials－Sheet 5：Requirements for rigid laminated sheets based on polyester resins
KS C IEC 60893-3-6:2022 Insulating materials — Industrial rigid laminated sheets based on thermosetting resins for electrical purposes — Part 3-6: Specifications for individual materials — Requirements for rigid laminated sh
KS C IEC 60893-3-7-2015(2020) Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes－Part 3：Specifications for individual materials－Sheet 7：Requirements for rigid laminated sheets
KS C IEC 60893-3-2:2018 Insulating materials — Industrial rigid laminated sheets based on thermosetting resins for electrical purposes — Part 3-2: Specifications for individual materials — Requirement for rigid laminated she
KS V ISO 15840-2006(2016) Standard specification for thermosetting resin fiberglass pipe and fittings to be used for marine applications
KS C IEC 60893-1-2008(2021) Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes－Part 1：Definitions, designations and general requirments
KS C IEC 60893-1-2008(2016) Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes－Part 1：Definitions, designations and general requirments

Taiwan Provincial Standard of the People's Republic of China, Thermosetting Resin Analysis

CNS 11366-1985 Decorative Laminated Sheet Based on Thermosetting Resins
CNS 11367-1985 Method of Test for Decorative Laminated Sheet Based on Thermosetting Resins

American Society for Testing and Materials (ASTM), Thermosetting Resin Analysis

ASTM D5028-96(2003) Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis
ASTM D5028-17 Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis
ASTM D5028-96(2003)e1 Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis
ASTM D5028-96 Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis
ASTM D5028-09 Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis
ASTM D4640-86(1996) Standard Test Method for Determining Stroke Cure Time of Thermosetting Phenol-Formaldehyde Resins
ASTM D5813-95 Standard Specification for Cured-In-Place Thermosetting Resin Sewer Pipe
ASTM D709-16 Standard Specification for Laminated Thermosetting Materials
ASTM D2566-86 Test Method for Linear Shrinkage of Cured Thermosetting Casting Resins During Cure
ASTM D5813-04(2018) Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems
ASTM D3262-04 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
ASTM D3262-03 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
ASTM D3517-04 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
ASTM D3517-03 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
ASTM D5813-04 Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems
ASTM D5813-04(2008) Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems
ASTM D5813-04(2012) Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems
ASTM D4640-86(2022) Standard Test Method for Determining Stroke Cure Time of Thermosetting Phenol-Formaldehyde Resins
ASTM D3262-06 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
ASTM D3517-06 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
ASTM E1118/E1118M-16 Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP)
ASTM E1118/E1118M-16(2020) Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP)
ASTM D4640-86(2009) Standard Test Method for Determining Stroke Cure Time of Thermosetting Phenol-Formaldehyde Resins
ASTM D4640-86(2001) Standard Test Method for Determining Stroke Cure Time of Thermosetting Phenol-Formaldehyde Resins
ASTM D4640-86(2017) Standard Test Method for Determining Stroke Cure Time of Thermosetting Phenol-Formaldehyde Resins
ASTM F1173-95 Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications
ASTM F1173-01 Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications
ASTM F1173-01(2006) Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications
ASTM D5685-01 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
ASTM F1173-01(2023) Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications
ASTM D3517-19 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
ASTM D5685-19 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
ASTM D2310-06(2012) Standard Classification for Machine-Made ldquo;Fiberglassrdquo; (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D2471-99 Standard Test Method for Gel Time and Peak Exothermic Temperature of Reacting Thermosetting Resins
ASTM E1118-05 Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP)
ASTM D2924-01(2006) Standard Test Method for External Pressure Resistance of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D2924-01 Standard Test Method for External Pressure Resistance of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D2924-99 Standard Test Method for External Pressure Resistance of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D4097-18 Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
ASTM D4097-95ae3 Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
ASTM D2924-12 Standard Test Method for External Pressure Resistance of ldquo;Fiberglassrdquo; (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D4097-19 Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
ASTM D3299-18 Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
ASTM D3299-08 Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
ASTM D2105-01(2019) Standard Test Method for Longitudinal Tensile Properties of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
ASTM D2310-06 Standard Classification for Machine-Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D2310-01 Standard Classification for Machine-Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D2310-97 Standard Classification for Machine-Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D3299-10 Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
ASTM D2996-01 Standard Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D2996-00 Standard Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D2996-95 Standard Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D2996-01(2007)e1 Standard Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D2105-97 Standard Test Method for Longitudinal Tensile Properties of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
ASTM D2105-01 Standard Test Method for Longitudinal Tensile Properties of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
ASTM D2105-01(2007)e1 Standard Test Method for Longitudinal Tensile Properties of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
ASTM D2105-01(2014) Standard Test Method for Longitudinal Tensile Properties of ldquo;Fiberglassrdquo; 40;Glass-Fiber-Reinforced Thermosetting-Resin41; Pipe and Tube
ASTM D3262-16 Standard Specification for &x201c;Fiberglass&x201d; (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
ASTM D2996-15 Standard Specification for Filament-Wound “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D2924-12(2017) Standard Test Method for External Pressure Resistance of &x201c;Fiberglass&x201d; (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D4024-05 Standard Specification for Machine Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
ASTM D4024-00 Standard Specification for Machine Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
ASTM D3982-03 Standard Specification for Contact Molded "Fiberglass" (Glass Fiber Reinforced Thermosetting Resin) Duct and Hoods
ASTM D4024-12 Standard Specification for Machine Made ldquo;Fiberglassrdquo; (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
ASTM F1173-01(2018) Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications
ASTM D2997-21 Standard Specification for Centrifugally Cast “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D3754-19 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe
ASTM D2996-17 Standard Specification for Filament-Wound &x201c;Fiberglass&x201d; (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D4161-14(2019) Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals
ASTM D7750-23 Standard Test Method for Cure Behavior of Thermosetting Resins by Dynamic Mechanical Procedures using an Encapsulated Specimen Rheometer
ASTM D3753-19 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Manholes and Wetwells
ASTM D5421-05 Standard Specification for Contact Molded "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
ASTM D2997-01 Standard Specification for Centrifugally Cast "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D2997-99 Standard Specification for Centrifugally Cast "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D2997-01(2007)e1 Standard Specification for Centrifugally Cast "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D3840-19 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications
ASTM D5421-23 Standard Specification for Contact Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
ASTM D3753-20 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Manholes and Wetwells
ASTM D2997-15 Standard Specification for Centrifugally Cast “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D3982-08 Standard Specification for Contact Molded x201C;Fiberglassx201D; (Glass Fiber Reinforced Thermosetting Resin) Ducts
ASTM D3982-08(2014) Standard Specification for Contact Molded ldquo;Fiberglassrdquo; 40;Glass Fiber Reinforced Thermosetting Resin41; Ducts

British Standards Institution (BSI), Thermosetting Resin Analysis

BS ISO 4216:2021 Thermosetting resin and UV curable resin. Determination of shrinkage by continuous measurement method
20/30412517 DC BS ISO 4216. Thermosetting resin and UV curable resin. Determination of shrinkage by continuous measurement method
BS EN ISO 8130-8:1995 Coating powders. Assessment of the storage stability of thermosetting powders
BS 7332:1990 Specification for decorative continuous laminates (DCL) based on thermosetting resins
BS EN ISO 8130-8:2010 Coating powders. Assessment of the storage stability of thermosetting powders
BS EN ISO 9771:1997 Plastics. Phenolic resins. Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions
BS EN 60893-2:1995 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Methods of test
BS EN 61212-2:1996 Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Methods of test
BS EN 61212-2:2007 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Methods of test
BS PD IEC/TR 60893-4:2014 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Typical values
BS EN 61212-1:1996 Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - General requirements
BS 2782-8 Method 835D:1980 Methods of testing plastics - Other properties - Determination of gelation time of thermosetting resins using a hot plate
BS EN 60893-3-7:2004+A1:2009 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Requirements for rigid laminated sheets based on polyimide resins
BS EN 60893-3-6:2004+A1:2009 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Requirements for rigid laminated sheets based on silicone resins
BS 6374-3:1984 Lining of equipment with polymeric materials for the process industries - Specification for lining with stoved thermosetting resins
BS EN 60893-3-5:2004+A1:2009 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Requirements for rigid laminated sheets based on polyester resins
BS 6374-4:1984 Lining of equipment with polymeric materials for the process industries - Specification for lining with cold curing thermosetting resins
BS EN 60893-1:1995 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Definitions, designations and general requirements
BS 6128-13:1983 Industrial laminated rods and tubes based on thermosetting resins - Specification for rectangular moulded tubes
BS EN 60893-2:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Methods of test
BS EN 438-2:2005 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Determination of properties
BS EN 438-2:2016 High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates). Determination of properties
BS EN 60893-3-2:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins
BS EN 60893-3-4:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins
BS EN 60893-3-5:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins
BS EN 60893-3-6:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
BS EN 60893-3-4:2004+A1:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins
BS EN 60893-3-2:2004+A1:2011 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Requirements for rigid laminated sheets based on epoxy resins
BS EN 60893-3-3:2004+A1:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins
BS EN 60893-3-7:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on polymide resins

IPC - Association Connecting Electronics Industries, Thermosetting Resin Analysis

IPC TM-650 5.1.412-1975 Analysis of Epoxy Resin for Solids Content
IPC TM-650 5.1.410-1975 Analysis of Epoxy Resin for Activity

RU-GOST R, Thermosetting Resin Analysis

GOST R 57697-2017 Polymer composites. Method for determination of curing properties of pultrusion resins by thermal analysis
GOST R 57694-2017 Polymer composites. Method for determination of curing characteristics of thermosetting resins
GOST R 52078-2003 Wood particle boards, laminated with paper impregnated with thermosetting resins
GOST 32289-2013 Wood particleboards, laminated with paper impregnated with thermosetting resins
GOST 28746-1990 Moulding compounds and casting thermosetting resins. Accelerated test method for heating resistance
GOST R 56818-2015 Polymer composites. Determination of chemical resistance of thermosetting resins
GOST R 57917-2017 Polymer composites. Determination of dynamic viscosity of thermosetting resins by the sinusoidal method
GOST 29170.1-1991 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Definitions, designations and general requirements
GOST R 55927-2013 Fiberboards of a dry method of production, laminated with paper impregnated with thermosetting resins. Technical specifications

Hebei Provincial Standard of the People's Republic of China, Thermosetting Resin Analysis

DB13/T 1589-2012 Thermosetting phenolic resins for foam materials

Group Standards of the People's Republic of China, Thermosetting Resin Analysis

T/QWA 001-2016 Particle reinforced thermosetting resin inspection well
T/CSTM 00253-2020 Test method of thermal analysis coupled with mass spectrometry for phenolic resin
T/CECS 571-2019 Technical specification for the application of particle-reinforced thermosetting resin inspection wells
T/CFA 0202014-2021 Hardener for thermosetting phenolic resin used for foundry sand mold (core) of binder jetting process

International Organization for Standardization (ISO), Thermosetting Resin Analysis

ISO 4216:2021 Thermosetting resin and UV curable resin — Determination of shrinkage by continuous measurement method
ISO 4586-1:1981 Plastics — Decorative laminated sheets based on thermosetting resins — Part 1: Specification
ISO 4586-2:1981 Plastics — Decorative laminated sheets based on thermosetting resins — Part 2: Determination of properties
ISO 1642:1975 Title missing - Legacy paper document
ISO 1642:1987 Plastics; Industrial laminated sheets based on thermosetting resins; Specification
ISO 1642:1979 Plastics — Industrial laminated sheets based on thermosetting resins — Specification
ISO 4586-2:2004 High-pressure decorative laminates - Sheets made from thermosetting resins - Part 2: Determination of properties
ISO 4586-1:2004 High-pressure decorative laminates - Sheets made from thermosetting resins - Part 1: Classification and specifications
ISO 4586-2:1997/Amd 6:2003 High-pressure decorative laminates - Sheets made from thermosetting resins - Part 2: Determination of properties; Amendment 6: Resistance to wet heat
ISO/TR 10465-1:1993 Underground installation of flexible glass-reinforced thermosetting resin (GRP) pipes; part 1: installation procedures
ISO 4586-1:1987 Decorative high-pressure laminates (HPL); Sheets based on thermosetting resins; Part 1 : Specification
ISO 4586-1:1995 High-pressure decorative laminates - Sheets made from thermosetting resins - Part 1: Classification and specifications
ISO 4586-2:1997/Amd 3:2002 High-pressure decorative laminates - Sheets made from thermosetting resins - Part 2: Determination of properties; Amendment 3: Lightfastness
ISO 4586-1:1997/Amd 3:2002 High-pressure decorative laminates - Sheets made from thermosetting resins - Part 1: Classification and specifications; Amendment 3: Lightfastness
ISO 4586-2:1997/Amd 4:2000 High-pressure decorative laminates - Sheets made from thermosetting resins - Part 2: Determination of properties; Amendment 4: Resistance to surface wear
ISO 4586-2:1997/Amd 5:2002 High-pressure decorative laminates - Sheets made from thermosetting resins - Part 2: Determination of properties; Amendment 5: Resistance to scratching
ISO 4586-2:1995 High-pressure decorative laminates - Sheets made from thermosetting resins - Part 2: Determination of properties
ISO 4586-2:1988 Decorative high-pressure laminates (HPL); sheets based on thermosetting resins; part 2: determination of properties

United States Navy, Thermosetting Resin Analysis

NAVY MIL-R-23461 A-1987 RESIN COMPOUND, THERMOSETTING, ROOM TEMPERATURE CURING, FOR METAL COATING
NAVY L-P-511 NOTICE 2-2001 PLASTIC SHEET, LAMINATED, THERMOSETTING, COTTON FABRIC BASE, PHENOLIC-RESIN, POST-FORMING
NAVY L-P-511 (1)-1967 PLASTIC SHEET, LAMINATED, THERMOSETTING, COTTON FABRIC BASE, PHENOLIC-RESIN, POST-FORMING
NAVY L-P-511-1964 PLASTIC SHEET, LAMINATED, THERMOSETTING, COTTON FABRIC BASE, PHENOLIC-RESIN, POST-FORMING

American National Standards Institute （ANSI), Thermosetting Resin Analysis

ASME NM.2-2022 Fiber-Reinforced Thermosetting-Resin Piping Systems
ANSI/ASTM D5813:2004 Specification for Cured-in-place Thermosetting Resin Sewer Piping Systems
ANSI/ASME NM.2-2020 Glass-Fiber-Reinforced Thermosetting-Resin Piping Systems
ANSI/ASTM D4473:2001 Measuring the Cure Behavior of Thermosetting Resins Using Dynamic Mechanical Properties (08.03)
ANSI/ASTM D3517:2011 Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
ANSI/ASTM D2471:1999 Test Method for Gel Time and Peak Exothermic Temperature of Reacting Thermosetting Resins (08.02)
ANSI/ASTM D3262:2011 Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
ANSI/ASTM D2996:2001 Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe
ANSI/ASTM D3982:2008 Specification for Contact Molded "fiberglass " Glass Fiber Reinforced Thermosetting Resin Duct and Hoods
ANSI/ASTM D5685:2011 Specification for Fiberglass Glass-Fiber-Reinforced Thermosetting-Resin Pressure Pipe Fittings
ANSI/ASTM D4097:2018 Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
ANSI/ASTM D3262:2016 Standard Specification for ��Fiberglass�� (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
ANSI/ASTM D2997:2015 Standard Specification for Centrifugally Cast ��Fiberglass�� (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ANSI/ASTM D3839:2008 Practice for Underground Installation of Flexible Reinforced Thermosetting Resin Pipe and Reinforced Plastic Mortar Pipe (08.04)
ANSI/ASTM D4161:2006 Specification For "fiberglass" Glass-fiber-reinforced Thermosetting-resin Pipe Joints Using Flexible Elastomeric Seals
ANSI/ASTM D3839:2014 Standard Guide for Underground Installation of ��Fiberglass�� (Glass-Fiber Reinforced Thermosetting-Resin) Pipe
ANSI/ASTM D5421:2005 Specification for Contact Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
ANSI/ASTM D3754:2011 Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe
ANSI/ASTM D5421:2015 Standard Specification for Contact Molded ��Fiberglass�� (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
ANSI/UL 1684A-2006 Standard for Safety for Supplemental Requirements for Extra Heavy Wall Reinforced Thermosetting Resin Conduit (RTRC) and Fittings

American Society of Mechanical Engineers (ASME), Thermosetting Resin Analysis

ASME NM.2-2020 Glass-Fiber-Reinforced Thermosetting-Resin Piping Systems
ASME N-155-2-2001 Fiberglass Reinforced Thermosetting Resin Pipe Section III, Division 1

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Thermosetting Resin Analysis

GB/T 26735-2011 Glass fiber reinfoced thermosetting resin spray pipe
GB/T 27808-2011 Saturated polyester resins for thermosetting powder coatings
GB/T 1303.4-2009 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes.Part 4:Requirements for rigid laminated sheets based on epoxy resins
GB/T 1303.6-2009 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes.Part 6:Requirements for rigid laminated sheets based on phenolic resins
GB/T 1303.7-2009 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes.Part 7:Requirements for rigid laminated sheets based on polyester resins
GB/T 1303.8-2009 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes.Part 8:Requirements for rigid laminated sheets based on silicone resins
GB/T 7911-1999 Decorative high-pressure liminates(HPL)--Sheets based on thermosetting resins
GB/T 7911-2013 High-pressure decorative laminates.Sheets made from thermosetting resins
GB/T 27809-2011 Bisphenol A epoxy resins for thermosetting powder coatings
GB/T 1303.9-2009 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes.Part 9:Requirements for rigid laminated sheets based on polyimide resins
GB/T 1303.11-2009 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes.Part 11:Requirements for rigid laminated sheets based on polyamide-imide resins
GB/T 1303.10-2009 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes.Part 10:Requirements for rigid laminated sheets based on bis-maleimide resins
GB/T 1303.12-2022 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes—Part 12：Typical values
GB/T 5130-1997 Test methods for industrial rigid laminated sheets based on thermosetting resins for electrical purpose
GB/T 23100-2008 Industrial rigid round winded tubes based on thermosetting resins for electrical purposes
GB/T 15102-2017(英文版) Surface decorated fiberboard and particleboard with paper impregnated thermosetting resins
GB/T 1303.2-2009 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes.Part 2:Test methods
GB/T 32675-2016 Plastics.Phenolic resins.Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions
GB/T 34722-2017(英文版) Surface decorated plywood and blockboard with paper impregnated thermosetting resins
GB/T 1303.1-2009 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes.Part 1:Definitions,designations and general requirements
GB/T 5132.1-2009 Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes.Part 1:General requirements
GB/T 5132.2-2009 Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes.Part 2:Methods of test
GB/T 32491-2016 Test method for long-term hydrostatic pressure of glass fiber reinforced thermosetting resin pipe and fittings
GB/T 1303.3-2008 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes.Part 3:Requirements for types of industrial rigid laminated sheets
GB/T 1303.2-2002 Specification for industrial rigid laminated Sheets based on thermosetting resins for electrical purposes Part 3: Specifications for individual materials Sheet 3: Requirements for rigid laminated Sheets based on melamine resins
GB/T 5132.5-2009 Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes.Part 5:Round laminated moulded rods
GB/T 18381-2001 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes definitions,designations and general requirements

Professional Standard - Building Materials, Thermosetting Resin Analysis

JC/T 552-2011 Filament-wound thermosetting resin pressured pipe
JC 552-1994 Filament winding reinforced thermosetting resin pressure pipe
JC/T 1026-2007 Glass fiber reinforced thermosetting resin grating for supporting loads
JC/T 587-2012 Filament wound glass fiber reinforced thermoset resin corrosion resistant vertical tanks
JC/T 718-2012 Filament wound glass fiber reinforced thermoset resin corrosion resistant horizontal tanks

NEMA - National Electrical Manufacturers Association, Thermosetting Resin Analysis

NEMA TC 14-2002 Reinforced Thermosetting Resin Conduit (RTRC) and Fittings
NEMA TC 14-1984 Filament-Wound Reinforced Thermosetting Resin Conduit and Fittings

SE-SIS, Thermosetting Resin Analysis

SIS 16 85 01-1963 Thermosetting resinbonded laminates for industrial use.

RO-ASRO, Thermosetting Resin Analysis

STAS 9117/1-1971 MODIFIED UREO-FORMALDEHYDE RESINS. Methods of analysis

CZ-CSN, Thermosetting Resin Analysis

CSN 64 0342-1990 1'lastics. 'JVrrriosetting easting resins. Jetcrinination of viscosity incrrnso of joxy resms (hiriiig cm-hig
CSN 64 0810-1983 Testing ol plastics. Dctermination moulding properties of thermosetingresins on the plastometer KK

PL-PKN, Thermosetting Resin Analysis

PN E29080-1988 Insulating materials Laminated sheets based on thermosetting resins
PN C89423-1992 Plastics. Phenol-formaldehyde resins. Determination of free phenol by gas chromatography

IN-BIS, Thermosetting Resin Analysis

National Electrical Manufacturers Association（NEMA), Thermosetting Resin Analysis

NEMA TC 14.BG-2015 Belowground Reinforced Thermosetting Resin Conduit (RTRC) and Fittings
NEMA TC 14.AG-2015 Aboveground Reinforced Thermosetting Resin Conduit (RTRC) and Fittings
NEMA TC 14.XW-2015 Extra Heavy Wall Aboveground Reinforced Thermosetting Resin Conduit (RTRC) and Fittings

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Thermosetting Resin Analysis

GB/T 1303.5-2017 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes—Part 5: Requirements for rigid laminated sheets based on melamine resins

Canadian General Standards Board （CGSB), Thermosetting Resin Analysis

CGSB 1-GP-71 METH 82.1-1982 Methodes D'Essai Des Peintures Et Pigments Analyse De La Resine Vinylique Separation Et Identification De La Resine Vinylique (Analyse Qualitative)

API - American Petroleum Institute, Thermosetting Resin Analysis

API SPEC 15LR-1976 SPECIFICATION FOR REINFORCED THERMOSETTING RESIN LINE PIPE (RTRP) FOURTH EDITION
API SPEC 15AR-1981 SPECIFICATION FOR REINFORCED THERMOSETTING RESIN CASING AND TUBING (Second Edition)
API STD 5LR-1968 GLASS FIBER REINFORCED THERMOSETTING RESIN LINE PIPE (First Edition)
API SPEC 5AR-1981 SPECIFICATION FOR REINFORCED THERMOSETTING RESIN CASING AND TUBING SECOND EDITION (WITHDRAWN)
API RP 15A4-1976 Recommended Practice for Care and Use of Reinforced Thermosetting Resin Casing and Tubing (Out of Print)
API RP 5A4-1976 RECOMMENDED PRACTICE for CARE AND USE OF REINFORCED THERMOSETTING RESIN CASING AND TUBING (First Edition)
API SPEC 5AR-1975 SPECIFICATION FOR REINFORCED THERMOSETTING RESIN CASING AND TUBING (First Edition; Incorporating Supplement: March 1976)

(U.S.) Ford Automotive Standards, Thermosetting Resin Analysis

FORD ESF-M2G331-A-1995 ADHESIVE, EPOXY - ONE COMPONENT - HEAT CURING - STRUCTURAL
FORD M3D24-A-1990 EPOXY THERMOSETTING RESIN AND HARDENER - PLASTIC TOOL SURFACE COATING
FORD ASL POLYMERS-3D-2020 APPROVED SOURCE LIST (ASL) - CATEGORY POLYMERS - THERMOSETTING (RESINS AND FOAMS)
FORD ESE-M4G17-B-2014 SEALER, THERMOSET POLYESTER RESIN ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSF-M2G331-A2-2015 ADHESIVE, EPOXY - ONE COMPONENT - HEAT CURING - STRUCTURAL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESF-M2G295-A-2014 ADHESIVE, EPOXY - ONE COMPONENT - HEAT CURING - STRUCTURAL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESF-M2G331-A-2015 ADHESIVE, EPOXY - ONE COMPONENT - HEAT CURING - STRUCTURAL ***TO BE USED WITH FORD WSS-M99P1111-A***

Japanese Industrial Standards Committee (JISC), Thermosetting Resin Analysis

JIS K 7012:2013 Glass-fiber reinforced thermosetting resin chemical-resistant tanks
JIS K 7012:1999 Glass-fiber reinforced thermosetting resin chemical-resistant tanks
JIS H 8691:2022 Test method of the mold release film for thermosetting resin molds -- Fluorine containing compound mold release film

国家林业局, Thermosetting Resin Analysis

LY/T 2706-2016 Gas chromatographic analysis method of modified rosin resin acid

Defense Logistics Agency, Thermosetting Resin Analysis

DLA MIL-PRF-31032/5 (2)-2011 PRINTED WIRING BOARD, RIGID, MULTILAYERED, THERMOPLASTIC, THERMOSETTING, OR THERMOPLASTIC AND THERMOSETTING RESIN BASE MATERIAL, WITH PLATED THROUGH HOLES, FOR HIGH FREQUENCY APPLICATIONS
DLA MIL-PRF-31032/5 A-2012 PRINTED WIRING BOARD, RIGID, MULTILAYERED, THERMOPLASTIC, THERMOSETTING, OR THERMOPLASTIC AND THERMOSETTING RESIN BASE MATERIAL, WITH PLATED THROUGH HOLES, FOR HIGH FREQUENCY APPLICATIONS

Standard Association of Australia （SAA）, Thermosetting Resin Analysis

AS 2634:1983 Chemical plant equipment made from glass-fibre reinforced plastics (GRP) based on thermosetting resins
AS/NZS 2924.1:1998 High pressure decorative laminates - Sheets made from thermosetting resins - Classification and specifications

Underwriters Laboratories (UL), Thermosetting Resin Analysis

UL 1684-1993 UL Standard for Safety Reinforced Thermosetting Resin Conduit (First Edition)
UL 1684A-2004 UL Standard for Safety Supplemental Requirements for Extra Heavy Wall Reinforced Thermosetting Resin Conduit (RTRC) and Fittings First Edition; Reprint with revisions through and including January 23, 2007
UL 1684 BULLETIN-2004 UL Standard for Safety Reinforced Thermosetting Resin Conduit (RTRC) and Fittings
UL 1684 BULLETIN-2011 UL Standard for Safety Reinforced Thermosetting Resin Conduit (RTRC) and Fittings
UL 2515A-2011 Supplemental requirements for extra heavy wall reinforced thermosetting resin conduit (RTRC) and fittings
UL 2420 BULLETIN-2011 UL Standard for Safety Belowground Reinforced Thermosetting Resin Conduit (RTRC) and Fittings
UL 1684-1996 UL Standard for Safety Reinforced Thermosetting Resin Conduit (RTRC) and Fittings (Second Edition)
UL 2515-2019 UL Standard for Safety Aboveground Reinforced Thermosetting Resin Conduit (RTRC) and Fittings (Second Edition)
UL 1684-2000 UL Standard for Safety Reinforced Thermosetting Resin Conduit (RTRC) and Fittings (Third Edition)

KR-KS, Thermosetting Resin Analysis

KS P ISO 9917-2-2017 Dental－Water-based cements－Part 2：Resin-modified cements
KS C IEC 60893-3-3-2018 Insulating materials — Industrial rigid laminated sheets based on thermosetting resins for electrical purposes — Part 3-3: Specifications for individual materials — Requirement for rigid laminated she
KS C IEC 60893-3-4-2018 Insulating materials — Industrial rigid laminated sheets based on thermosetting resins for electrical purposes — Part 3-4: Specifications for individual materials — Requirement for rigid laminated she
KS C IEC 60893-3-6-2022 Insulating materials — Industrial rigid laminated sheets based on thermosetting resins for electrical purposes — Part 3-6: Specifications for individual materials — Requirements for rigid laminated sh
KS C IEC 60893-3-2-2018 Insulating materials — Industrial rigid laminated sheets based on thermosetting resins for electrical purposes — Part 3-2: Specifications for individual materials — Requirement for rigid laminated she

Danish Standards Foundation, Thermosetting Resin Analysis

DS/EN 438-1:1992 Decorative high-pressure laminates (HPL). Sheets based on thermosetting resins. Part 1: Specifications
DS/EN 438-2:1992 Decorative high-pressure laminates (HPL). Sheets based on thermosetting resins. Part 2: Determination of properties
DS/EN 60893-2:2004 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 2: Methods of test
DS/EN ISO 9917-2:2010 Dentistry - Water-based cements - Part 2: Resin-modified cements
DS/EN ISO 9771:1997 Plastics - Phenolic resins - Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions
DS/EN 60893-3-2/A1:2011 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins
DS/EN 60893-3-2:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins
DS/EN 60893-3-4:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins
DS/EN 60893-3-5/A1:2009 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins
DS/EN 60893-3-5:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins
DS/EN 60893-3-6/A1:2010 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
DS/EN 60893-3-6:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
DS/EN 60893-3-4/A1:2013 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins
DS/EN 60893-3-3:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins
DS/EN 60893-3-3/A1:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins
DS/EN 60893-3-7/A1:2010 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins
DS/EN 60893-3-7:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins
DS/CEN/TS 14807:2005 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the structural analysis of buried GRP-UP pipelines
DS/EN 61212-2:2007 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 2: Methods of test
DS/EN 60893-1:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements

FI-SFS, Thermosetting Resin Analysis

SFS-ISO 4586/2 E:1986 Decorative laminates Sheets based on thermosetting resins.Part 2: Determination of properties

International Electrotechnical Commission (IEC), Thermosetting Resin Analysis

IEC 60893-2:2003 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 2: Methods of test
IEC 60893-3-2:1998 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for rigid laminated sheets based on epoxide resins
IEC 60893-2:1992 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes; part 2: methods of test
IEC 60893-3-2:1993 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes; part 3: specifications for individual materials; sheet 2: requirements for rigid laminated sheets based on epoxide resins
IEC 60893-3-6:2009 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
IEC 60893-3-6:2017 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
IEC TR 60893-4:2017 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values
IEC TR 60893-4:2014/AMD1:2017 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values
IEC TR 60893-4:2014 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values
IEC TR 60893-4:2003 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values
IEC TR 60893-4:2014+AMD1:2017 CSV Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values
IEC 60893-3-6:2003+AMD1:2009+AMD2:2017 CSV Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sh
IEC 60893-3-6:2003+AMD1:2009 CSV Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sh
IEC 60893-3-3:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials; Requirements for rigid laminated sheets based on melamine resins
IEC 61212-1:1995 Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 1: General requirements
IEC 61212-2:1995 Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 2: Methods of test
IEC 60893-3-5:2003/AMD1:2009 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sh
IEC 60893-3-4:1993 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes; part 3: specifications for individual materials; sheet 4: requirements for rigid laminated sheets based on phenolic resins
IEC 60893-3-5:1993 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes; part 3: specifications for individual materials; sheet 5: requirements for rigid laminated sheets based on polyester resins
IEC 60893-3-6:1993 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes; part 3: specifications for individual materials; sheet 6: requirements for rigid laminated sheets based on silicone resins
IEC 60893-3-5:2003 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials; Requirements for rigid laminated sheets based on polyester resins
IEC 60893-3-4:2003 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials; Requirements for rigid laminated sheets based on phenolic resins
IEC 60893-3-2:2003 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials; Requirements for rigid laminated sheets based on epoxide resins
IEC 60893-3-6:2003 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials; Requirements for rigid laminated sheets based on silicone resins
IEC 60893-3-4:2003+AMD1:2012 CSV Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigid laminated sh
IEC 60893-3-2:2003+AMD1:2011 CSV Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sh
IEC 60893-3-5:2003+AMD1:2009 CSV Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sh
IEC 60893-3-7:1994 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials; sheet 7: Requirements for rigid laminated sheets based on polyimide resins
IEC 60893-3-7:2003 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials; Requirements for rigid laminated sheets based on polyimide resins
IEC 60893-3-7:2009 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins
IEC 60893-3-2/AMD1:1998 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for rigid laminated sheets based on epoxyde resin; Amendment 1
IEC 60893-3-6:2003/AMD2:2017 Amendment 2 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigi
IEC 60893-3-3/COR2:1997 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes; part 3: specifications for individual materials; sheet 3: requirements for rigid laminated sheets based on melamine resins
IEC 60893-3-3:1993 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes; part 3: specifications for individual materials; sheet 3: requirements for rigid laminated sheets based on melamine resins
IEC 60893-3-3:2003 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials; Requirements for rigid laminated sheets based on melamine resins
IEC 60893-3-3:2003+AMD1:2011 CSV Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sh
IEC 60893-3-7:2003+AMD1:2009 CSV Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sh
IEC 60893-3-6:2003/AMD1:2009 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins; Amendment 1
IEC 60893-3-5:2009 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins
IEC 60893-3-4:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials; Requirements for rigid laminated sheets based on phenolic resins
IEC 60893-1:1987 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Part 1 : Definitions, designations and general requirements

European Committee for Standardization (CEN), Thermosetting Resin Analysis

EN 1796:2013 Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP)
EN 1796:2006 Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) Incorporates Amendment A1: 2008
EN 438-2:2005 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called Laminates) - Part 2: Determination of properties

AENOR, Thermosetting Resin Analysis

UNE-EN ISO 9771:1997 PLASTICS. PHENOLIC RESINS. DETERMINATION OF THE PSEUDO-ADIABATIC TEMPERATURE RISE OF LIQUID RESOLS WHEN CURED UNDER ACID CONDITIONS (ISO 9771:1995).
UNE-EN 60893-3-6:2004/A1:2010 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
UNE-EN 60893-3-4:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins
UNE-EN 60893-3-6:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
UNE-EN 60893-3-2:2004/A1:2011 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins
UNE-EN 60893-3-4:2004/A1:2013 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins
UNE-IEC/TR 60893-4:2005 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values
UNE-EN 60893-3-3:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins
UNE-EN 60893-3-5:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins
UNE-EN 60893-3-2:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins
UNE-EN 60893-3-5:2004/A1:2010 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins
UNE-EN 60893-3-3:2004/A1:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins
UNE-EN 60893-2:2005 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 2: Methods of test
UNE-EN 60893-3-7:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins
UNE-EN 60893-3-7:2004/A1:2010 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins
UNE-EN ISO 9917-2:2010 Dentistry - Water-based cements - Part 2: Resin-modified cements (ISO 9917-2:2010)
UNE-EN 60893-1:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 1: Definitions, designations and general requirements

German Institute for Standardization, Thermosetting Resin Analysis

DIN EN 60893-3-1 Bb.1:1996 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Comparison of types
DIN EN ISO 9771:1997-05 Plastics - Phenolic resins - Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions (ISO 9771:1995); German version EN ISO 9771:1997
DIN EN 60893-2:2005 Insulating materials - Industrial laminated sheets based on thermosetting resins for electrical purposes - Part 2: Methods of test (IEC 60893-2:2003); German version EN 60893-2:2004
DIN EN 60893-3-5:2010 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins (IEC 60893-3-5:2003 + A1
DIN EN 60893-3-2:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins (IEC 60893-3-2:2003 + A1:201
DIN EN ISO 9917-2:2017 Dentistry - Water-based cements - Part 2: Resin-modified cements (ISO 9917-2:2017)
DIN EN 60893-3-7:2010 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins (IEC 60893-3-7:2003 + A1
DIN 65467:1999-03 Aerospace - Testing of thermosetting resin systems with and without reinforcement - DSC method
DIN CEN/TS 14807:2014-03*DIN SPEC 19548:2014-03 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the structural analysis of buried GRP-UP pipelines; German version CEN/TS 14807:2013
DIN EN 60893-3-6:2010 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins (IEC 60893-3-6:2003 + A1:
DIN IEC/TR 60893-4:2015 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values (IEC/TR 60893-4:2014)
DIN EN 438-2:2005 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties; German version EN 438-2:2005
DIN EN 438-2:2019-03 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties; German version EN 438-2:2016+A1:2018

ZA-SANS, Thermosetting Resin Analysis

SANS 4586-2:1997 High-pressure decorative laminates - Sheets made from thermosetting resins Part 2: Determination of properties
SANS 4586-1:1995 High-pressure decorative laminates - Sheets made from thermosetting resins Part 1: Classification and specifications

未注明发布机构, Thermosetting Resin Analysis

BS 6374-4:1984(1999) Lining of equipment with polymeric materials for the process industries — Part 4 : Specification for lining with cold curing thermosetting resins
BS EN 60893-3-4:2004+A1:2012(2014) Insulating materials — Industrial rigid laminated sheets based on thermosetting resins for electrical purposes — Part 3 - 4 : Specifications for individual materials — Requirements for rigid laminated sheets based on phenolic resins

Lithuanian Standards Office , Thermosetting Resin Analysis

LST EN ISO 9771:2001 Plastics - Phenolic resins - Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions (ISO 9771:1995)
LST EN 60893-3-2+A1-2001 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 2: Requirements for rigid laminated sheets based on epoxide resins (IEC 60893-3-2:1993+A1
LST EN ISO 9917-2:2010 Dentistry - Water-based cements - Part 2: Resin-modified cements (ISO 9917-2:2010)
LST EN 60893-3-6-2004/A1-2010 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins (IEC 60893-3-6:2003/A1:2
LST EN 60893-3-5-2004/A1-2010 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins (IEC 60893-3-5:2003/A1:
LST EN 60893-3-2-2004/A1-2011 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins (IEC 60893-3-2:2003/A1:2011
LST EN 60893-3-4-2004/A1-2013 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins (IEC 60893-3-4:2003/A1:2
LST EN 60893-3-3-2004/A1-2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins (IEC 60893-3-3:2003/A1:2

American Welding Society (AWS), Thermosetting Resin Analysis

WRC 415:1996 Literature Survey and Interpretive Study on Thermoplastic and Reinforced-Thermosetting-Resin Piping and Component Standards

AT-ON, Thermosetting Resin Analysis

ONORM EN 438-1-1993 Decorative high-pressure laminates (HPL) - Sheets based on thermosetting resins - Specification
ONORM EN 438-2-1992 Decorative high-pressure laminates (HPL) - Sheets based on thermosetting resins - Determination of properties

Professional Standard - Petroleum, Thermosetting Resin Analysis

SY/T 0323-2000 Code for construction and acceptance of glass fiber reinforced thermosetting resin pressure pipelines
SY/T 4130-2016 Specification for construction of glass fiber reinforced thermosetting resin on-site winding vertical storage tanks
SY 4130-2016 Construction specification for glass fiber reinforced thermosetting resin field wound vertical storage tank

国家能源局, Thermosetting Resin Analysis

NB/T 10654-2021 Test methods for thermosetting epoxy resins for wind turbine blades

WRC - Welding Research Council, Thermosetting Resin Analysis

BULLETIN 415-1996 LITERATURE SURVEY AND INTERPRETIVE STUDY ON THERMOPLASTIC AND REINFORCED-THERMOSETTING-RESIN PIPING AND COMPONENTS STANDARDS

Professional Standard - Energy, Thermosetting Resin Analysis

SY/T 4130 –2016 Construction specification for glass fiber reinforced thermosetting resin field wound vertical storage tank

CENELEC - European Committee for Electrotechnical Standardization, Thermosetting Resin Analysis

EN 60893-2:1994 Specification for Industrial Rigid Laminated Sheets Based on Thermosetting Resins for Electrical Purposes Part 2: Methods of Test
EN 60893-3-2:1995 Specification for Industrial Rigid Laminated Sheets Based on Thermosetting Resins for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 2: Requirements for Rigid Laminated Sheets Based on Epoxide Resins (Includes Corrigendum 1995)
EN 60893-3-4:1995 Specification for Industrial Rigid Laminated Sheets Based on Thermosetting Resins for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 4: Requirements for Rigid Laminated Sheets Based on Phenolic Resins (Includes Corrigendum 1995)
EN 60893-3-5:1995 Specification for Industrial Rigid Laminated Sheets Based on Thermosetting Resins for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 5: Requirements for Rigid Laminated Sheets Based on Polyester Resins
EN 60893-3-6:1995 Specification for Industrial Rigid Laminated Sheet Based on Thermosetting Resins for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 6: Requirements for Rigid Laminated Sheets Based on Silicone Resins
EN 60893-3-3:1995 Specification for Industrial Rigid Laminated Sheets Based on Thermosetting Resins for Electrical Purposes Part 3: Specifications for Individual Materials - Sheet 3: Requirements for Rigid Laminated Sheets Based on Melamine Resins (Includes Corrigendum 199

Professional Standard - Aviation, Thermosetting Resin Analysis

HB 7615-1998 High performance liquid chromatographic analysis method for composite resin matrix components and pre-curing degree

Aerospace, Security and Defence Industries Association of Europe (ASD), Thermosetting Resin Analysis

ASD-STAN PREN 2562-1989 Aerospace Series Unidirectional Laminates Carbon-Thermosetting Resin Flexural Test (Issue P 1)

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Thermosetting Resin Analysis

PREN 2562-1989 Aerospace Series Unidirectional Laminates Carbon-Thermosetting Resin Flexural Test (Issue P 1)

ES-UNE, Thermosetting Resin Analysis

UNE-CEN/TS 14807:2013 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the structural analysis of buried GRP-UP pipelines (Endorsed by AENOR in May of 2014.)
UNE-EN 438-2:2016+A1:2019 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties

Canadian Standards Association (CSA), Thermosetting Resin Analysis

CSA C22.2 NO.2515.1-2013 Supplemental requirements for extra heavy wall (XW) reinforced thermosetting resin conduit (RTRC) and fittings (First Edition)

European Committee for Electrotechnical Standardization（CENELEC）, Thermosetting Resin Analysis

EN 60893-3-3:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins (Incorporates Amendment A1:

GOSTR, Thermosetting Resin Analysis

GOST R 57995-2017 Composite polymers. Determination of curing behavior of thermosetting resins by dynamic mechanical procedures using a rheometer