ZH
RU
ES

thermosetting resin teeth

thermosetting resin teeth, Total:499 items.

In the international standard classification, thermosetting resin teeth involves: Dentistry, Plastics, Products of the chemical industry, Interior finishing, Ground service and maintenance equipment, Analytical chemistry, Protection of and in buildings, Reinforced plastics, Paints and varnishes, Materials and components for railway engineering, Pipeline components and pipelines, Rubber and plastics products, Fluid power systems, Wood-based panels, Elements of buildings, Materials for aerospace construction, Graphic technology, Insulating materials, Small craft, Fluid storage devices, External sewage systems, Equipment for the chemical industry, Storage equipment, Organic chemicals, Electrical accessories, Railway rolling stock, Shipbuilding and marine structures in general, Fasteners, Wind turbine systems and other alternative sources of energy, Animal feeding stuffs, Water quality.

Korean Agency for Technology and Standards (KATS), thermosetting resin teeth

KS P 7117-2017 Dentistry－Dental heat curing acrylic resin for crown
KS M 3337-2009 Laminated thermosetting sheets
KS M 3338-2008 Laminated thermosetting rods
KS M 3339-2012 Laminated thermosetting tubes
KS F 4740-2007 Thermosetting plastic ceiling tile
KS F 4740-1999 Thermosetting plastic ceiling tile
KS P 5312-2017 Dentistry－Self curing acrylic resin for crown
KS P 7448-1999(2014) Dental selfcuring acylic resin for crown
KS M 3332-2009 Testing methods laminated thermosetting high-pressure decorative sheets
KS M 3332-1982 Testing methods laminated thermosetting high-pressure decorative sheets
KS M 3550-7-2015 Cured-in-place thermosetting resin tube for renovation of potable water piping system
KS M 3550-7-2013 Cured-in-place thermosetting resin tube for renovation of potable water piping system
KS P 7117-2011 Dentistry－Dental heat curing acrylic resin for crown
KS M 3550-9-2016 Cured-in-place thermosetting resin tube for renovation of sewer piping system
KS M 3550-9-2013 Cured-in-place thermosetting resin tube for renovation of sewer piping system
KS M 3550-9-2016(2021) Cured-in-place thermosetting resin tube for renovation of sewer piping system
KS M 3550-7-2019 Cured-in-place thermosetting resin tube for renovation of potable water piping system
KS M ISO 4586-2:2013 High-pressure decorative laminates — Sheets made from thermosetting resins — Part 2: Determination of properties
KS M ISO 4586-2:2007 High-pressure decorative laminates-Sheets made from thermosetting resins-Part 2:Determination of properties
KS V ISO 15840-2006(2021) Standard specification for thermosetting resin fiberglass pipe and fittings to be used for marine applications
KS M 3500-7-2013 Cured--in--place thermosetting resin tube for renovation of potable water piping system
KS V ISO 15840:2006 Standard specification for thermosetting resin fiberglass pipe and fittings to be used for marine applications
KS M ISO 4586-1-2012(2017) High-pressure decorative laminates－Sheets made from thermosetting resins－Part 1：Classification and specifications
KS P ISO 9917-2:2021 Dentistry — Water-based cements —Part 2: Resin-modified cements
KS C IEC 60893-2:2003 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes-Part 2:Methods of test
KS M ISO 4586-1-2012(2022) High-pressure decorative laminates－Sheets made from thermosetting resins－Part 1：Classification and specifications
KS M ISO 4586-2-2013(2018) High-pressure decorative laminates — Sheets made from thermosetting resins — Part 2: Determination of properties
KS C IEC 60893-3-2:2003 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes-Part 3:Specifications for individual materials-Sheet 2:Requirements for rigid laminated sheets based on epoxide resins
KS C IEC 60893-3-3:2003 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes-Part 3:Specifications for individual materials-Sheet 3:Requirements for rigid laminated sheets based on melamine resins
KS C IEC 61212-2:2008 Insulating materials-Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes -Part 2:Methods of test
KS V ISO 15840-2006(2016) Standard specification for thermosetting resin fiberglass pipe and fittings to be used for marine applications
KS C IEC 60893-2-2015(2020) Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes－Part 2：Methods of test
KS C IEC 60893-3-3:2018 Insulating materials — Industrial rigid laminated sheets based on thermosetting resins for electrical purposes — Part 3-3: Specifications for individual materials — Requirement for rigid laminated she
KS C IEC 60893-3-4:2018 Insulating materials — Industrial rigid laminated sheets based on thermosetting resins for electrical purposes — Part 3-4: Specifications for individual materials — Requirement for rigid laminated she
KS C IEC 60893-3-6:2003 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes-Part 3:Specifications for individual materials-Sheet 6:Requirements for rigid laminated sheets based on silicone resins
KS C IEC 60893-3-6-2015(2020) Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes－Part 3：Specifications for individual materials－Sheet 6：Requirements for rigid laminated sheets
KS C IEC 60893-3-6:2015 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes－Part 3：Specifications for individual materials－Sheet 6：Requirements for rigid laminated sheets based on silicone resins
KS C IEC 60893-3-7:2003 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes-Part 3:Specifications for individual materials-Sheet 7:Requirements for rigid laminated sheets based on polyimide resins
KS C IEC 60893-3-7:2015 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes－Part 3：Specifications for individual materials－Sheet 7：Requirements for rigid laminated sheets based on polyimide resins
KS C IEC 60893-3-5:2003 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes-Part 3:Specifications for individual materials-Sheet 5:Requirements for rigid laminated sheets based on polyester resins
KS C IEC 60893-3-4:2003 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes－Part 3：Specifications for individual materials－Sheet 4：Requirements for rigid laminated sheets based on phenolic resins

Society of Automotive Engineers (SAE), thermosetting resin teeth

SAE ARP5144-2011 Heat Application for Thermosetting Resin Curing
SAE ARP5144-2000 Heat Application for Thermosetting Resin Curing
SAE AMS3727A-1993 RESIN, EPOXY, MATRIX, THERMOSETTING Moderate Temperature Resistant, Unfilled
SAE AMS3727-1988 RESIN, EPOXY, MATRIX, THERMOSETTING Moderate Temperature Resistant, Unfilled
SAE AMS3731/9-1981 POTTING COMPOUND, EPOXY Flexible, Thermal Shock Resistant, Heat Cure
SAE AMS3731/9A-1987 POTTING COMPOUND, EPOXY Flexible, Thermal Shock Resistant, Heat Cure
SAE AMS3729A-2022 Epoxy Resin Matrix, Thermosetting Moderate Temperature Resistant, Unfilled
SAE AMS3642C-2011 PLASTIC MOLDINGS, LAMINATED, THERMOSETTING RESIN Glass Cloth Reinforced Heat Resistant
SAE AMS3642D-1998 Plastic Moldings, Laminated, Thermosetting Resin Glass Cloth Reinforced Heat Resistant
SAE AMS3731/9B-1993 (Noncurrent)Potting Compound, Epoxy Flexible, Thermal Shock Resistant, Heat Cure
SAE AMS3729-2011 EPOXY RESIN MATRIX, THERMOSETTING Moderate Temperature Resistant, Unfilled
SAE AMS3641A-1953 PLASTIC MOLDINGS, THERMOSETTING Phenol Formaldehyde, Macerated Fabric Filled
SAE AMS3642-1961 PLASTIC MOLDINGS, LAMINATED, THERMOSETTING RESIN, Glass Fabric Reinforced Heat Resistant (500 F)
SAE AMS3642A-1965 PLASTIC MOLDINGS, LAMINATED, THERMOSETTING RESIN Glass Fabric Reinforced Heat Resistant, 500 F (260 C)
SAE AMS3642B-1976 PLASTIC MOLDINGS, LAMINATED, THERMOSETTING RESIN Glass Fabric Reinforced Heat Resistant, 500°F (260°C)
SAE AMS3368-1968 SILICONE RESIN, ELASTOMERIC, TRANSPARENT ELEVATED TEMPERATURE CURE
SAE ARP4916-1997 Masking and Cleaning of Epoxy and Polyester Matrix Thermosetting Composite Materials
SAE AMS3618-1970 (Noncurrent)Resin, Polyimide, Thermosetting High Heat (290 C (554 F) Resistant) R(1994)
SAE ARP4916-2011 MASKING AND CLEANING OF EPOXY AND POLYESTER MATRIX THERMOSETTING COMPOSITE MATERIALS
SAE AMS3370A-2001 Silicone Resin, Elastomeric, Transparent Room Temperature Cure
SAE AMS3370-1968 SILICONE RESIN, ELASTOMERIC, TRANSPARENT ROOM TEMPERATURE CURE
SAE AMS3368A-2001 Silicone Resin, Elastomeric, Transparent Elevated Temperature Cure
SAE AMS3571-1976 POLYURETHANE CASTING RESIN, FLEXIBLE, SOLID Polyether-Type
SAE AMS3729A-1994 Epoxy Resin Matrix, Thermosetting Moderate Temperature Resistant, Unfilled
SAE AMS3642D-1993 Plastic Moldings, Laminated, Thermosetting Resin Glass Cloth Reinforced Heat Resistant
SAE AMS3642E-2012 Plastic Moldings, Laminated, Thermosetting Resin, Glass Cloth Reinforced, Heat Resistant
SAE AMS3372A-2001 Silicone Resin, Elastomeric High Tear Strength Elevated Temperature Cure
SAE AMS3372-1969 SILICONE RESIN, ELASTOMERIC High Tear Strength, Elevated Temperature Cure
SAE AMS3371-1994 SILICONE RESIN, ELASTOMERIC, OPAQUE Room Temperature Cure
SAE AMS3731/4A-2011 POTTING COMPOUND, EPOXY Bisphenol A-Type Impregnating Resin, Heat Cure, Single Component
SAE AMS3731/4-1981 POTTING COMPOUND, EPOXY Bisphenol A-Type Impregnating Resin, Heat Cure, Single Component
SAE AMS3732A-1993 (Noncurrent)Potting Compound, Epoxy One Part, Filled, Heat Cure, Low CTE
SAE AMS3728A-1994 Epoxy Cresol Novolac Resin Low Molecular Weight
SAE AMS3571A-1984 RESIN, POLYETHER URETHANE (EU) CASTING Flexible, Solid, Unfilled
SAE AMS3571B-2001 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled

SAE - SAE International, thermosetting resin teeth

SAE ARP5144A-2017 Heat Application for Thermosetting Resin Curing
SAE AMS3727B-1995 RESIN@ EPOXY@ MATRIX@ THERMOSETTING MODERATE TEMPERATURE RESISTANT@ UNFILLED
SAE AMS3731/9C-2016 Potting Compound@ Epoxy Flexible@ Thermal Shock Resistant@ Heat Cure
SAE AMS3618-1985 Resin@ Polyimide@ Thermosetting High Heat (290 C (554 F) Resistant)
SAE AMS3618A-1996 Resin@ Polyimide@ Thermosetting High Heat (290 °C (554 °F) Resistant)
SAE AMS3369A-1996 Silicone Resin@ Elastomeric@ Opaque Elevated Temperature Cure
SAE AMS3371-1988 Silicone Resin@ Elastomeric@ Opaque Room Temperature Cure
SAE AMS3369-1969 Silicone Resin@ Elastomeric@ Opaque Elevated Temperature Cure )
SAE AMS3371A-2009 Silicone Resin@ Elastomeric@ Opaque Room Temperature Cure
SAE AMS3732B-2015 Potting Compound@ Epoxy One Part@ Filled@ Heat Cure@ Low CTE
SAE AMS3731/4C-2016 Potting Compound@ Epoxy Bisphenol A-Type Impregnating Resin@ Heat Cure@ Single Component

Japanese Industrial Standards Committee (JISC), thermosetting resin teeth

JIS T 6611:2009 Dental resin cements
JIS T 6509:1993 Dental self-curing acrylic resin for crown
JIS T 6508:1993 Dental heat curing acrylic resin for crown
JIS T 6609-2:2005 Dentistry -- Water-based cements -- Part 2: Resin-modified cements
JIS T 6609-2:2014 Dental water-based cements -- Part 2: Resin-modified cements
JIS K 7012:2013 Glass-fiber reinforced thermosetting resin chemical-resistant tanks
JIS K 7012:1999 Glass-fiber reinforced thermosetting resin chemical-resistant tanks
JIS H 8691:2022 Test method of the mold release film for thermosetting resin molds -- Fluorine containing compound mold release film
JIS K 7012:1992 Glass-fiber reinforced thermosetting resin chemical-resistant tanks

Taiwan Provincial Standard of the People's Republic of China, thermosetting resin teeth

CNS 11366-1985 Decorative Laminated Sheet Based on Thermosetting Resins
CNS 11367-1985 Method of Test for Decorative Laminated Sheet Based on Thermosetting Resins
CNS 8637-1989 Heat Curing Acrylic Resin for Dental Crown
CNS 9352-1982 Bushes for Plain Bearings Made From Dura Plastics
CNS 11557-1986 Acrylic Denture Base Resin
CNS 3707-1973 Phenol and Formaldehyde Content in Extract of Phenolic Resin or Other Thermosetting Resins Dinner Wares
CNS 9353-1982 Method of Test for Bushes of Plain Bearings Made From Dura Plastics

British Standards Institution (BSI), thermosetting resin teeth

BS ISO 4216:2021 Thermosetting resin and UV curable resin. Determination of shrinkage by continuous measurement method
BS EN ISO 9917-2:2010 Dentistry - Water-based cements - Resin-modified cements
20/30412517 DC BS ISO 4216. Thermosetting resin and UV curable resin. Determination of shrinkage by continuous measurement method
BS EN ISO 8130-8:1995 Coating powders. Assessment of the storage stability of thermosetting powders
BS 7332:1990 Specification for decorative continuous laminates (DCL) based on thermosetting resins
BS EN ISO 8130-8:2010 Coating powders. Assessment of the storage stability of thermosetting powders
BS EN ISO 9771:1997 Plastics. Phenolic resins. Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions
BS EN ISO 9917-2:2017 Tracked Changes. Dentistry. Water-based cements. Resin-modified cements
BS EN 60893-2:1995 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Methods of test
BS PD IEC/TR 60893-4:2014 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Typical values
BS EN 61212-1:1996 Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - General requirements
BS EN 60893-3-7:2004+A1:2009 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Requirements for rigid laminated sheets based on polyimide resins
BS EN 60893-3-6:2004+A1:2009 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Requirements for rigid laminated sheets based on silicone resins
BS EN 60893-3-5:2004+A1:2009 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Requirements for rigid laminated sheets based on polyester resins
BS EN 60893-2:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Methods of test
BS EN 61212-2:1996 Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Methods of test
BS EN 438-2:2005 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Determination of properties
BS EN 438-2:2016 High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates). Determination of properties
BS EN 61212-2:2007 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Methods of test
BS EN 60893-3-2:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins
BS EN 60893-3-4:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins
BS EN 60893-3-5:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins
BS EN 60893-3-6:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
BS EN 60893-3-4:2004+A1:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins
BS EN 60893-3-2:2004+A1:2011 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Requirements for rigid laminated sheets based on epoxy resins
BS EN 60893-3-3:2004+A1:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins
BS EN 60893-3-7:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on polymide resins
BS 2782-8 Method 835D:1980 Methods of testing plastics - Other properties - Determination of gelation time of thermosetting resins using a hot plate
BS EN 438-2:2016+A1:2018 High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates). Determination of properties
PD IEC/TR 60893-4:2014+A1:2017 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Typical values
BS EN IEC 60893-3-6:2004+A2:2018 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials. Requirements for rigid laminated sheets based on silicone resins
BS EN 60893-3-3:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins

KR-KS, thermosetting resin teeth

KS P ISO 9917-2-2017 Dental－Water-based cements－Part 2：Resin-modified cements
KS P ISO 9917-2-2021 Dentistry — Water-based cements —Part 2: Resin-modified cements
KS C IEC 60893-3-3-2018 Insulating materials — Industrial rigid laminated sheets based on thermosetting resins for electrical purposes — Part 3-3: Specifications for individual materials — Requirement for rigid laminated she
KS C IEC 60893-3-4-2018 Insulating materials — Industrial rigid laminated sheets based on thermosetting resins for electrical purposes — Part 3-4: Specifications for individual materials — Requirement for rigid laminated she

Association Francaise de Normalisation, thermosetting resin teeth

NF S91-211-2*NF EN ISO 9917-2:2017 Dentistry - Water-based cements - Part 2 : resin-modified cements
NF F19-478:1989 Rolling stock. Thermo setting powder paints made of epoxy resins.
NF EN ISO 9771:1997 Plastiques - Résines phénoliques - Détermination de l'élévation de température pseudoadiabatique des résols liquides thermodurcis en conditions acides.
NF F19-477:1991 Railway rolling stock. Thermo setting powder paints made of polyester resins.
NF L17-451:1988 Aéronautique et espace - Préimprégnés de résine thermodurcissable - Analyse thermique différentielle - Méthode d'essai.
NF S91-211-2:2010 Dentistry - Water-based cements - Part 2 : resin-modified cements.
NF J95-046-1:2001 Small craft - Hull construction and scantlings - Part 1 : materials : thermosetting resins, glass-fibre reinforcement, reference laminate.
NF EN ISO 9917-2:2017 Médecine bucco-dentaire - Ciments à base d'eau - Partie 2 : ciments modifiés par addition de résine
NF L17-452:1988 Aerospace. Fabric pre-impregnated with thermosetting resin. Perpendicular tensile resistance test.
NF L17-455:1988 Aéronautique et espace - Matériaux composites à base de préimprégnés de résine thermodurcissable - Résistance au pelage.
NF F31-447:1989 Rolling stock. Laminated panels with decorated surface, made of thermosetting resins.
NF T30-499-8:2011 Coating powders - Part 8 : assessment of the storage stability of thermosetting powders.
NF T30-499-8*NF EN ISO 8130-8:2021 Coating powders - Part 8 : assessment of the storage stability of thermosetting powders
NF T54-701:1988 Plastics. Industrial laminated sheets based on thermosetting resins. Specification.
NF C26-183-6/A2*NF EN IEC 60893-3-6/A2:2018 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6 : specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
NF EN 2833-005:2014 Série aérospatiale - Préimprégnés de verre textile/résine thermodurcissable - Spécification technique - Partie 005 : verre textile/résine phénolique préimprégnés
NF EN ISO 3673-2:2012 Plastiques - Résines époxydes - Partie 2 : préparation des éprouvettes et détermination des propriétés des résines époxydes réticulées
NF C26-183-2*NF EN 60893-3-2:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2 : specification for individual materials - Requirements for rigid laminated sheets based on epoxy resins.
NF C26-183-3*NF EN 60893-3-3:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3 : specification for individual materials - Requirements for rigid laminated sheets based on melamine resins
NF C26-183-6/A1*NF EN 60893-3-6/A1:2010 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6 : Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins.
NF C26-183-5/A1*NF EN 60893-3-5/A1:2009 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5 : Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins
NF C26-183-2/A1*NF EN 60893-3-2/A1:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2 : specification for individual materials - Requirements for rigid laminated sheets based on epoxy resins
NF C26-183-4/A1*NF EN 60893-3-4/A1:2013 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4 : specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins

Danish Standards Foundation, thermosetting resin teeth

DS/EN ISO 9917-2:2010 Dentistry - Water-based cements - Part 2: Resin-modified cements
DS/EN ISO 9771:1997 Plastics - Phenolic resins - Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions
DS/EN 60893-3-2/A1:2011 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins
DS/EN 60893-3-2:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins
DS/EN 60893-3-4:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins
DS/EN 60893-3-5/A1:2009 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins
DS/EN 60893-3-5:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins
DS/EN 60893-3-6/A1:2010 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
DS/EN 60893-3-6:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
DS/EN 60893-3-4/A1:2013 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins
DS/EN 438-1:1992 Decorative high-pressure laminates (HPL). Sheets based on thermosetting resins. Part 1: Specifications
DS/EN 438-2:1992 Decorative high-pressure laminates (HPL). Sheets based on thermosetting resins. Part 2: Determination of properties
DS/EN 60893-2:2004 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 2: Methods of test
DS/EN 60893-3-3:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins
DS/EN 60893-3-3/A1:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins
DS/EN 60893-3-7/A1:2010 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins
DS/EN 60893-3-7:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins

General Motors Corporation (GM), thermosetting resin teeth

GM 9985682-1997 Resin, Impregnation, Heat-Cured Revision C
GM 9985734-1997 Resin, Impregnation, Heat-Cured Revision C
GM 9985791-1997 Resin, Impregnation, Heat-Cured Revision A

CZ-CSN, thermosetting resin teeth

CSN 66 5223-1963 Self-curing acrylic resin for dental use
CSN 64 0341-1990 Plastics. Termosetting casting resins. etermination of temperature increa- e of epoxy resins during curing
CSN 64 0342-1990 1'lastics. 'JVrrriosetting easting resins. Jetcrinination of viscosity incrrnso of joxy resms (hiriiig cm-hig
CSN 64 0810-1983 Testing ol plastics. Dctermination moulding properties of thermosetingresins on the plastometer KK

Hebei Provincial Standard of the People's Republic of China, thermosetting resin teeth

DB13/T 1589-2012 Thermosetting phenolic resins for foam materials

Group Standards of the People's Republic of China, thermosetting resin teeth

T/QWA 001-2016 Particle reinforced thermosetting resin inspection well
T/CECS 571-2019 Technical specification for the application of particle-reinforced thermosetting resin inspection wells
T/CFA 0202014-2021 Hardener for thermosetting phenolic resin used for foundry sand mold (core) of binder jetting process

International Organization for Standardization (ISO), thermosetting resin teeth

ISO 4216:2021 Thermosetting resin and UV curable resin — Determination of shrinkage by continuous measurement method
ISO 1642:1975 Title missing - Legacy paper document
ISO 1642:1987 Plastics; Industrial laminated sheets based on thermosetting resins; Specification
ISO 1642:1979 Plastics — Industrial laminated sheets based on thermosetting resins — Specification
ISO 9917-2:2017 Dentistry — Water-based cements — Part 2: Resin-modified cements
ISO 4586-1:1981 Plastics — Decorative laminated sheets based on thermosetting resins — Part 1: Specification
ISO 4586-2:1981 Plastics — Decorative laminated sheets based on thermosetting resins — Part 2: Determination of properties
ISO 4586-2:2004 High-pressure decorative laminates - Sheets made from thermosetting resins - Part 2: Determination of properties
ISO 4586-2:1997/Amd 6:2003 High-pressure decorative laminates - Sheets made from thermosetting resins - Part 2: Determination of properties; Amendment 6: Resistance to wet heat
ISO 9771:1995 Plastics - Phenolic resins - Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions

United States Navy, thermosetting resin teeth

NAVY MIL-R-23461 A-1987 RESIN COMPOUND, THERMOSETTING, ROOM TEMPERATURE CURING, FOR METAL COATING
NAVY L-P-511 NOTICE 2-2001 PLASTIC SHEET, LAMINATED, THERMOSETTING, COTTON FABRIC BASE, PHENOLIC-RESIN, POST-FORMING
NAVY L-P-511 (1)-1967 PLASTIC SHEET, LAMINATED, THERMOSETTING, COTTON FABRIC BASE, PHENOLIC-RESIN, POST-FORMING
NAVY L-P-511-1964 PLASTIC SHEET, LAMINATED, THERMOSETTING, COTTON FABRIC BASE, PHENOLIC-RESIN, POST-FORMING

American Society of Mechanical Engineers (ASME), thermosetting resin teeth

ASME NM.2-2020 Glass-Fiber-Reinforced Thermosetting-Resin Piping Systems
ASME N-155-2-2001 Fiberglass Reinforced Thermosetting Resin Pipe Section III, Division 1

American National Standards Institute （ANSI), thermosetting resin teeth

ASME NM.2-2022 Fiber-Reinforced Thermosetting-Resin Piping Systems
ANSI/ASTM D5813:2004 Specification for Cured-in-place Thermosetting Resin Sewer Piping Systems
ANSI/ASME NM.2-2020 Glass-Fiber-Reinforced Thermosetting-Resin Piping Systems
ANSI/ASTM D4473:2001 Measuring the Cure Behavior of Thermosetting Resins Using Dynamic Mechanical Properties (08.03)
ANSI/ASTM D3517:2011 Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
ANSI/ASTM D2471:1999 Test Method for Gel Time and Peak Exothermic Temperature of Reacting Thermosetting Resins (08.02)
ANSI/ASTM D3262:2011 Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
ANSI/ASTM F1173:2001 Specification for Thermosetting Resin Fiberglass Pipe and Fittings to be Used for Marine Applications
ANSI/ASTM D2996:2001 Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe
ANSI/ASTM D3982:2008 Specification for Contact Molded "fiberglass " Glass Fiber Reinforced Thermosetting Resin Duct and Hoods
ANSI/ASTM D5685:2011 Specification for Fiberglass Glass-Fiber-Reinforced Thermosetting-Resin Pressure Pipe Fittings
ANSI/ASTM D4097:2018 Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
ANSI/ASTM D3262:2016 Standard Specification for ��Fiberglass�� (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
ANSI/ASTM D2997:2015 Standard Specification for Centrifugally Cast ��Fiberglass�� (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ANSI/ASTM D2310:2006 Classification for Machine-Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ANSI/ASTM D3839:2008 Practice for Underground Installation of Flexible Reinforced Thermosetting Resin Pipe and Reinforced Plastic Mortar Pipe (08.04)
ANSI/ASTM D4161:2006 Specification For "fiberglass" Glass-fiber-reinforced Thermosetting-resin Pipe Joints Using Flexible Elastomeric Seals
ANSI/ASTM D3839:2014 Standard Guide for Underground Installation of ��Fiberglass�� (Glass-Fiber Reinforced Thermosetting-Resin) Pipe
ANSI/ASTM D5421:2005 Specification for Contact Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
ANSI/ASTM D3754:2011 Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe
ANSI/ASTM D5421:2015 Standard Specification for Contact Molded ��Fiberglass�� (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
ANSI/UL 1684A-2006 Standard for Safety for Supplemental Requirements for Extra Heavy Wall Reinforced Thermosetting Resin Conduit (RTRC) and Fittings
ANSI/ASTM D3840:2010 Specification For "fiberglass " Glass-fiber-reinforced Thermosetting-resin Pipe Fittings For Nonpressure Applications
ANSI/ASTM D4398:2007 Test Method for Determining the Chemical Resistance of Fiberglas-Reinforced Thermosetting Resins by One-Side Panel Exposure
ANSI/UL 2515-2014 Standard for Safety for Aboveground Reinforced Thermosetting Resin Conduit (RTRC) and Fittings (Proposal dated 9-20-2013)

American Society for Testing and Materials (ASTM), thermosetting resin teeth

ASTM D4640-86(1996) Standard Test Method for Determining Stroke Cure Time of Thermosetting Phenol-Formaldehyde Resins
ASTM D5813-95 Standard Specification for Cured-In-Place Thermosetting Resin Sewer Pipe
ASTM D709-16 Standard Specification for Laminated Thermosetting Materials
ASTM D2566-86 Test Method for Linear Shrinkage of Cured Thermosetting Casting Resins During Cure
ASTM D5813-04(2018) Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems
ASTM F602-98a Standard Criteria for Implantable Thermoset Epoxy Plastics
ASTM D3262-04 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
ASTM D3262-03 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
ASTM D3517-04 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
ASTM D3517-03 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
ASTM D5813-04 Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems
ASTM D5813-04(2008) Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems
ASTM D5813-04(2012) Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems
ASTM D5028-96(2003) Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis
ASTM D4640-86(2022) Standard Test Method for Determining Stroke Cure Time of Thermosetting Phenol-Formaldehyde Resins
ASTM D5028-17 Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis
ASTM D3262-06 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
ASTM D3517-06 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
ASTM E1118/E1118M-16 Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP)
ASTM E1118/E1118M-16(2020) Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP)
ASTM D4640-86(2009) Standard Test Method for Determining Stroke Cure Time of Thermosetting Phenol-Formaldehyde Resins
ASTM D4640-86(2001) Standard Test Method for Determining Stroke Cure Time of Thermosetting Phenol-Formaldehyde Resins
ASTM D4640-86(2017) Standard Test Method for Determining Stroke Cure Time of Thermosetting Phenol-Formaldehyde Resins
ASTM F1173-95 Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications
ASTM F1173-01 Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications
ASTM F1173-01(2006) Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications
ASTM D5685-01 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
ASTM F1173-01(2023) Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications
ASTM D3517-19 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
ASTM D5685-19 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
ASTM D2471-99 Standard Test Method for Gel Time and Peak Exothermic Temperature of Reacting Thermosetting Resins
ASTM E1118-05 Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP)
ASTM D5028-96(2003)e1 Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis
ASTM D5028-96 Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis
ASTM D5028-09 Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis
ASTM D2924-01(2006) Standard Test Method for External Pressure Resistance of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D2924-01 Standard Test Method for External Pressure Resistance of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D2924-99 Standard Test Method for External Pressure Resistance of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D4097-18 Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
ASTM D4097-95ae3 Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
ASTM D2924-12 Standard Test Method for External Pressure Resistance of ldquo;Fiberglassrdquo; (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D4097-19 Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
ASTM D3299-18 Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
ASTM D3299-08 Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
ASTM D2105-01(2019) Standard Test Method for Longitudinal Tensile Properties of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
ASTM D3262-01 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
ASTM D3262-96 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
ASTM D3517-96 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
ASTM D3517-01 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
ASTM D3567-97 Standard Practice for Determining Dimensions of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings
ASTM D3567-97(2006) Standard Practice for Determining Dimensions of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings
ASTM D3299-10 Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
ASTM F1173-01(2012) Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications
ASTM D2996-01 Standard Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D2996-00 Standard Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D2996-95 Standard Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D2996-01(2007)e1 Standard Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D2105-97 Standard Test Method for Longitudinal Tensile Properties of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
ASTM D2105-01 Standard Test Method for Longitudinal Tensile Properties of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
ASTM D2105-01(2007)e1 Standard Test Method for Longitudinal Tensile Properties of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
ASTM D2310-06(2012) Standard Classification for Machine-Made ldquo;Fiberglassrdquo; (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D2105-01(2014) Standard Test Method for Longitudinal Tensile Properties of ldquo;Fiberglassrdquo; 40;Glass-Fiber-Reinforced Thermosetting-Resin41; Pipe and Tube
ASTM D3262-16 Standard Specification for &x201c;Fiberglass&x201d; (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
ASTM D2996-15 Standard Specification for Filament-Wound “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D2924-12(2017) Standard Test Method for External Pressure Resistance of &x201c;Fiberglass&x201d; (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D4024-05 Standard Specification for Machine Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
ASTM D4024-00 Standard Specification for Machine Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
ASTM D3982-03 Standard Specification for Contact Molded "Fiberglass" (Glass Fiber Reinforced Thermosetting Resin) Duct and Hoods
ASTM D4024-12 Standard Specification for Machine Made ldquo;Fiberglassrdquo; (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
ASTM F1173-01(2018) Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications
ASTM D2997-21 Standard Specification for Centrifugally Cast “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D3754-19 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe
ASTM D2996-17 Standard Specification for Filament-Wound &x201c;Fiberglass&x201d; (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D4161-14(2019) Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals
ASTM D7750-23 Standard Test Method for Cure Behavior of Thermosetting Resins by Dynamic Mechanical Procedures using an Encapsulated Specimen Rheometer
ASTM D3753-19 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Manholes and Wetwells
ASTM D5421-05 Standard Specification for Contact Molded "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
ASTM D2997-01 Standard Specification for Centrifugally Cast "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D2997-99 Standard Specification for Centrifugally Cast "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D2997-01(2007)e1 Standard Specification for Centrifugally Cast "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D3840-19 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications
ASTM D5421-23 Standard Specification for Contact Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
ASTM D3753-20 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Manholes and Wetwells
ASTM D2997-15 Standard Specification for Centrifugally Cast “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D3982-08 Standard Specification for Contact Molded x201C;Fiberglassx201D; (Glass Fiber Reinforced Thermosetting Resin) Ducts
ASTM D3982-08(2014) Standard Specification for Contact Molded ldquo;Fiberglassrdquo; 40;Glass Fiber Reinforced Thermosetting Resin41; Ducts
ASTM D29-98 Standard Specification for Centrifugally Cast "Fibreglass" (Glass Fiber Reinforced Thermosetting Resin) Pipe
ASTM D3839-02e1 Standard Guide for Underground Installation of "Fiberglass" (Glass-FiberReinforced Thermosetting-Resin) Pipe
ASTM D3839-02 Standard Guide for Underground Installation of "Fiberglass" (Glass-FiberReinforced Thermosetting-Resin) Pipe
ASTM E1118/E1118M-11 Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP)
ASTM D3839-08 Standard Guide for Underground Installation of x201C;Fiberglassx201D; (Glass-FiberReinforced Thermosetting-Resin) Pipe
ASTM D2924-12(2023) Standard Test Method for External Pressure Resistance of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

(U.S.) Ford Automotive Standards, thermosetting resin teeth

FORD ESE-M4G17-B-1992 SEALER, THERMOSET POLYESTER RESIN
FORD M3D26-A-1990 EPOXY THERMOSETTING LAMINATING RESIN AND HARDENER - PLASTIC TOOL MANUFACTURE
FORD M3D24-A-1990 EPOXY THERMOSETTING RESIN AND HARDENER - PLASTIC TOOL SURFACE COATING
FORD ESB-M4G101-B-1978 SEALER, LOW TEMPERATURE HEAT CURING SYNTHETIC RESIN BASE - THUMBABLE
FORD ASL POLYMERS-3D-2020 APPROVED SOURCE LIST (ASL) - CATEGORY POLYMERS - THERMOSETTING (RESINS AND FOAMS)
FORD ESE-M4G17-B-2014 SEALER, THERMOSET POLYESTER RESIN ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESF-M2G331-A-1995 ADHESIVE, EPOXY - ONE COMPONENT - HEAT CURING - STRUCTURAL
FORD ESK-M2G287-A1-1994 ADHESIVE, EPOXY - HEAT CURING, EXCEPTION IN SOLIDS (PARA 3.1.3): MIN. 97,0 %
FORD ESB-M4G290-A-1988 SEALER, ACRYLIC BASED - HEAT CURING - EXTRUDABLE - PAINTABLE
FORD WSS-M2G574-A-2015 ADHESIVE, HEAT CURING, EPOXY ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ASL POLYMERS-4D-2020 APPROVED SOURCE LIST (ASL) - CATEGORY POLYMERS - THERMOPLASTIC / RESINS

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, thermosetting resin teeth

GB/T 26735-2011 Glass fiber reinfoced thermosetting resin spray pipe
GB/T 27808-2011 Saturated polyester resins for thermosetting powder coatings
GB/T 7911-1999 Decorative high-pressure liminates(HPL)--Sheets based on thermosetting resins
GB/T 7911-2013 High-pressure decorative laminates.Sheets made from thermosetting resins
GB/T 27809-2011 Bisphenol A epoxy resins for thermosetting powder coatings
GB/T 1303.4-2009 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes.Part 4:Requirements for rigid laminated sheets based on epoxy resins
GB/T 1303.6-2009 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes.Part 6:Requirements for rigid laminated sheets based on phenolic resins
GB/T 1303.7-2009 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes.Part 7:Requirements for rigid laminated sheets based on polyester resins
GB/T 1303.8-2009 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes.Part 8:Requirements for rigid laminated sheets based on silicone resins
GB/T 1303.9-2009 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes.Part 9:Requirements for rigid laminated sheets based on polyimide resins
GB/T 5130-1997 Test methods for industrial rigid laminated sheets based on thermosetting resins for electrical purpose
GB/T 23100-2008 Industrial rigid round winded tubes based on thermosetting resins for electrical purposes
GB/T 15102-2017(英文版) Surface decorated fiberboard and particleboard with paper impregnated thermosetting resins
GB/T 32675-2016 Plastics.Phenolic resins.Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions
GB/T 24147-2009 Waterborne ultraviolet curable resin.Water soluble unsaturated polyester acrylate resin
GB/T 1303.11-2009 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes.Part 11:Requirements for rigid laminated sheets based on polyamide-imide resins
GB/T 1303.10-2009 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes.Part 10:Requirements for rigid laminated sheets based on bis-maleimide resins
GB/T 34722-2017(英文版) Surface decorated plywood and blockboard with paper impregnated thermosetting resins
GB/T 1303.12-2022 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes—Part 12：Typical values
GB/T 1303.2-2009 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes.Part 2:Test methods
GB/T 32491-2016 Test method for long-term hydrostatic pressure of glass fiber reinforced thermosetting resin pipe and fittings
GB/T 18381-2001 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes definitions,designations and general requirements
GB/T 7193.5-1987 Unsaturated polyester resin--Determination of heat stability at 80 Centigrade

Professional Standard - Building Materials, thermosetting resin teeth

JC/T 552-2011 Filament-wound thermosetting resin pressured pipe
JC 552-1994 Filament winding reinforced thermosetting resin pressure pipe
JC/T 1026-2007 Glass fiber reinforced thermosetting resin grating for supporting loads
JC/T 587-2012 Filament wound glass fiber reinforced thermoset resin corrosion resistant vertical tanks
JC/T 718-2012 Filament wound glass fiber reinforced thermoset resin corrosion resistant horizontal tanks

NEMA - National Electrical Manufacturers Association, thermosetting resin teeth

NEMA TC 14-2002 Reinforced Thermosetting Resin Conduit (RTRC) and Fittings
NEMA TC 14-1984 Filament-Wound Reinforced Thermosetting Resin Conduit and Fittings

SE-SIS, thermosetting resin teeth

SIS 16 85 01-1963 Thermosetting resinbonded laminates for industrial use.

Lithuanian Standards Office , thermosetting resin teeth

LST EN ISO 9917-2:2010 Dentistry - Water-based cements - Part 2: Resin-modified cements (ISO 9917-2:2010)
LST EN ISO 9771:2001 Plastics - Phenolic resins - Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions (ISO 9771:1995)
LST EN 60893-3-2+A1-2001 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 2: Requirements for rigid laminated sheets based on epoxide resins (IEC 60893-3-2:1993+A1

AENOR, thermosetting resin teeth

UNE-EN ISO 9917-2:2010 Dentistry - Water-based cements - Part 2: Resin-modified cements (ISO 9917-2:2010)
UNE-EN ISO 9771:1997 PLASTICS. PHENOLIC RESINS. DETERMINATION OF THE PSEUDO-ADIABATIC TEMPERATURE RISE OF LIQUID RESOLS WHEN CURED UNDER ACID CONDITIONS (ISO 9771:1995).
UNE-EN 60893-3-6:2004/A1:2010 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
UNE-EN 60893-3-4:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins
UNE-EN 60893-3-6:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
UNE-EN 60893-3-2:2004/A1:2011 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins
UNE-EN 60893-3-4:2004/A1:2013 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins
UNE-EN 60893-3-3:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins
UNE-EN 60893-3-5:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins
UNE-EN 60893-3-2:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins
UNE-EN 60893-3-5:2004/A1:2010 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins
UNE-EN 60893-3-3:2004/A1:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins
UNE-IEC/TR 60893-4:2005 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values
UNE-EN 60893-3-7:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins
UNE-EN 60893-3-7:2004/A1:2010 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins
UNE-EN 60893-2:2005 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 2: Methods of test

German Institute for Standardization, thermosetting resin teeth

DIN EN ISO 9917-2:2017 Dentistry - Water-based cements - Part 2: Resin-modified cements (ISO 9917-2:2017)
DIN EN 60893-3-1 Bb.1:1996 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Comparison of types
DIN EN ISO 9771:1997-05 Plastics - Phenolic resins - Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions (ISO 9771:1995); German version EN ISO 9771:1997
DIN EN ISO 9917-2:2017-12 Dentistry - Water-based cements - Part 2: Resin-modified cements (ISO 9917-2:2017); German version EN ISO 9917-2:2017
DIN EN 1796:2013 Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP); German version EN 1796:2013
DIN 65467:1999-03 Aerospace - Testing of thermosetting resin systems with and without reinforcement - DSC method
DIN EN ISO 9771:1997 Plastics - Phenolic resins - Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions (ISO 9771:1995); German version EN ISO 9771:1997
DIN EN 60893-3-5:2010 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins (IEC 60893-3-5:2003 + A1
DIN EN 60893-3-2:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins (IEC 60893-3-2:2003 + A1:201

RO-ASRO, thermosetting resin teeth

STAS 12593/1-1987 HOT CURING FURANIC RESIN FOR ABRASIVES
STAS 12593/2-1987 HARDENING AGENT FOR HOT CURING FURANIC RESIN FOR ABRASIVES

PL-PKN, thermosetting resin teeth

PN E29080-1988 Insulating materials Laminated sheets based on thermosetting resins
PN C89085-24-1988 Epoxy resins Methóds of testing Determination of properties of cured resins
PN C89082-17-1988 Unsaturated polyester resins Methods of testing Determination of properties of cured resins
PN P04646-1988 Textiles Determination of formaldehyde content in fabrics finished with thermosetting resins

IN-BIS, thermosetting resin teeth

RU-GOST R, thermosetting resin teeth

GOST R 57694-2017 Polymer composites. Method for determination of curing characteristics of thermosetting resins
GOST R 52078-2003 Wood particle boards, laminated with paper impregnated with thermosetting resins
GOST 32289-2013 Wood particleboards, laminated with paper impregnated with thermosetting resins
GOST 28746-1990 Moulding compounds and casting thermosetting resins. Accelerated test method for heating resistance
GOST R 56818-2015 Polymer composites. Determination of chemical resistance of thermosetting resins
GOST 31574-2012 Dental resin restorative materials. Technical requirements. Test methods
GOST R 57697-2017 Polymer composites. Method for determination of curing properties of pultrusion resins by thermal analysis
GOST R 57917-2017 Polymer composites. Determination of dynamic viscosity of thermosetting resins by the sinusoidal method
GOST 29170.1-1991 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Definitions, designations and general requirements
GOST R 55927-2013 Fiberboards of a dry method of production, laminated with paper impregnated with thermosetting resins. Technical specifications

National Electrical Manufacturers Association（NEMA), thermosetting resin teeth

NEMA TC 14.BG-2015 Belowground Reinforced Thermosetting Resin Conduit (RTRC) and Fittings
NEMA TC 14.AG-2015 Aboveground Reinforced Thermosetting Resin Conduit (RTRC) and Fittings
NEMA TC 14.XW-2015 Extra Heavy Wall Aboveground Reinforced Thermosetting Resin Conduit (RTRC) and Fittings

Professional Standard - Chemical Industry, thermosetting resin teeth

HG/T 2910-1997 Solid type photopolymer plate

API - American Petroleum Institute, thermosetting resin teeth

API SPEC 15LR-1976 SPECIFICATION FOR REINFORCED THERMOSETTING RESIN LINE PIPE (RTRP) FOURTH EDITION
API SPEC 15AR-1981 SPECIFICATION FOR REINFORCED THERMOSETTING RESIN CASING AND TUBING (Second Edition)
API STD 5LR-1968 GLASS FIBER REINFORCED THERMOSETTING RESIN LINE PIPE (First Edition)
API SPEC 5AR-1981 SPECIFICATION FOR REINFORCED THERMOSETTING RESIN CASING AND TUBING SECOND EDITION (WITHDRAWN)
API RP 15A4-1976 Recommended Practice for Care and Use of Reinforced Thermosetting Resin Casing and Tubing (Out of Print)
API RP 5A4-1976 RECOMMENDED PRACTICE for CARE AND USE OF REINFORCED THERMOSETTING RESIN CASING AND TUBING (First Edition)
API SPEC 5AR-1975 SPECIFICATION FOR REINFORCED THERMOSETTING RESIN CASING AND TUBING (First Edition; Incorporating Supplement: March 1976)

Professional Standard - Medicine, thermosetting resin teeth

YY/T 0113-1993 Resistance-to-abrasion capability test method for dental compound colophony
YY/T 0113-2015 Dentistry.Test method for the wear resistant of dental composite resin
YY 0271.2-2016 Water-based cements in dentistry part 2: Resin-modified cements

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, thermosetting resin teeth

GB/T 1303.5-2017 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes—Part 5: Requirements for rigid laminated sheets based on melamine resins

Defense Logistics Agency, thermosetting resin teeth

DLA MIL-PRF-31032/5 (2)-2011 PRINTED WIRING BOARD, RIGID, MULTILAYERED, THERMOPLASTIC, THERMOSETTING, OR THERMOPLASTIC AND THERMOSETTING RESIN BASE MATERIAL, WITH PLATED THROUGH HOLES, FOR HIGH FREQUENCY APPLICATIONS
DLA MIL-PRF-31032/5 A-2012 PRINTED WIRING BOARD, RIGID, MULTILAYERED, THERMOPLASTIC, THERMOSETTING, OR THERMOPLASTIC AND THERMOSETTING RESIN BASE MATERIAL, WITH PLATED THROUGH HOLES, FOR HIGH FREQUENCY APPLICATIONS

Standard Association of Australia （SAA）, thermosetting resin teeth

AS 2634:1983 Chemical plant equipment made from glass-fibre reinforced plastics (GRP) based on thermosetting resins
AS/NZS 2924.2:1998 High pressure decorative laminates - Sheets made from thermosetting resins - Determination of properties

Underwriters Laboratories (UL), thermosetting resin teeth

UL 1684-1993 UL Standard for Safety Reinforced Thermosetting Resin Conduit (First Edition)
UL 1684A-2004 UL Standard for Safety Supplemental Requirements for Extra Heavy Wall Reinforced Thermosetting Resin Conduit (RTRC) and Fittings First Edition; Reprint with revisions through and including January 23, 2007
UL 1684 BULLETIN-2004 UL Standard for Safety Reinforced Thermosetting Resin Conduit (RTRC) and Fittings
UL 1684 BULLETIN-2011 UL Standard for Safety Reinforced Thermosetting Resin Conduit (RTRC) and Fittings
UL 2515A-2011 Supplemental requirements for extra heavy wall reinforced thermosetting resin conduit (RTRC) and fittings
UL 2420 BULLETIN-2011 UL Standard for Safety Belowground Reinforced Thermosetting Resin Conduit (RTRC) and Fittings
UL 1684-1996 UL Standard for Safety Reinforced Thermosetting Resin Conduit (RTRC) and Fittings (Second Edition)
UL 2515-2019 UL Standard for Safety Aboveground Reinforced Thermosetting Resin Conduit (RTRC) and Fittings (Second Edition)
UL 1684-2000 UL Standard for Safety Reinforced Thermosetting Resin Conduit (RTRC) and Fittings (Third Edition)

ES-UNE, thermosetting resin teeth

UNE-EN ISO 9917-2:2018 Dentistry - Water-based cements - Part 2: Resin-modified cements (ISO 9917-2:2017)

European Committee for Standardization (CEN), thermosetting resin teeth

EN 1796:2013 Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP)
EN 1796:2006 Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) Incorporates Amendment A1: 2008

Jilin Provincial Standard of the People's Republic of China, thermosetting resin teeth

DB22/T 1944-2013 A class of thermoplastic polyimide resins

US-AAMA, thermosetting resin teeth

AAMA 305-2006 Voluntary Specification for Fiber Reinforced Thermoset Profiles

GM North America, thermosetting resin teeth

GM GM9301P-1989 Test for Intrinsic Melt Viscosity of Thermoplastic Resins

Professional Standard - Forestry, thermosetting resin teeth

LY/T 1860-2009 Non-formaldehyde thermoplastic resin plywood
LY/T 1860-2022 Non-formaldehyde thermoplastic resin plywood

U.S. Military Regulations and Norms, thermosetting resin teeth

ARMY MIL-P-43037-1961 PLASTIC RODS, LAMINATED, THERMOSETTING, NYLON FABRIC BASE, PHENOLIC RESIN
ARMY MIL-P-55072 A (1)-1960 PLASTIC SHEETS, PHENOLIC RESIN, LAMINATED, THERMOSETTING, COTTON-FABRIC-BASE (FOR MISSILE APPLICATION)
ARMY MIL-P-55072 A-1960 PLASTIC SHEETS, PHENOLIC RESIN, LAMINATED, THERMOSETTING, COTTON-FABRIC-BASE (FOR MISSILE APPLICATION)

American Welding Society (AWS), thermosetting resin teeth

WRC 415:1996 Literature Survey and Interpretive Study on Thermoplastic and Reinforced-Thermosetting-Resin Piping and Component Standards

AT-ON, thermosetting resin teeth

ONORM EN 438-1-1993 Decorative high-pressure laminates (HPL) - Sheets based on thermosetting resins - Specification
ONORM EN 438-2-1992 Decorative high-pressure laminates (HPL) - Sheets based on thermosetting resins - Determination of properties

Professional Standard - Petroleum, thermosetting resin teeth

SY/T 0323-2000 Code for construction and acceptance of glass fiber reinforced thermosetting resin pressure pipelines
SY/T 4130-2016 Specification for construction of glass fiber reinforced thermosetting resin on-site winding vertical storage tanks
SY 4130-2016 Construction specification for glass fiber reinforced thermosetting resin field wound vertical storage tank

国家能源局, thermosetting resin teeth

NB/T 10654-2021 Test methods for thermosetting epoxy resins for wind turbine blades

未注明发布机构, thermosetting resin teeth

YY/T 0271.2-2016 Water-based cements in dentistry Part 2: Resin-modified cements
BS 6374-4:1984(1999) Lining of equipment with polymeric materials for the process industries — Part 4 : Specification for lining with cold curing thermosetting resins
BS EN 60893-3-4:2004+A1:2012(2014) Insulating materials — Industrial rigid laminated sheets based on thermosetting resins for electrical purposes — Part 3 - 4 : Specifications for individual materials — Requirements for rigid laminated sheets based on phenolic resins

WRC - Welding Research Council, thermosetting resin teeth

BULLETIN 415-1996 LITERATURE SURVEY AND INTERPRETIVE STUDY ON THERMOPLASTIC AND REINFORCED-THERMOSETTING-RESIN PIPING AND COMPONENTS STANDARDS

ES-AENOR, thermosetting resin teeth

Sichuan Provincial Standard of the People's Republic of China, thermosetting resin teeth

DB51/T 2680-2020 Specifications for thermoplastic polyimide resins

International Electrotechnical Commission (IEC), thermosetting resin teeth

IEC 60893-3-2:1998 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for rigid laminated sheets based on epoxide resins
IEC 60893-2:2003 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 2: Methods of test
IEC 60893-3-2:1993 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes; part 3: specifications for individual materials; sheet 2: requirements for rigid laminated sheets based on epoxide resins
IEC 60893-3-6:2009 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
IEC 60893-3-6:2017 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
IEC 60893-2:1992 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes; part 2: methods of test
IEC 60893-3-3:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials; Requirements for rigid laminated sheets based on melamine resins
IEC TR 60893-4:2017 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values
IEC 60893-3-6:2003+AMD1:2009+AMD2:2017 CSV Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sh
IEC 60893-3-6:2003+AMD1:2009 CSV Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sh
IEC TR 60893-4:2014/AMD1:2017 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values
IEC TR 60893-4:2014 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values
IEC TR 60893-4:2003 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values
IEC TR 60893-4:2014+AMD1:2017 CSV Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values
IEC 60893-3-5:2003/AMD1:2009 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sh
IEC 60893-3-4:1993 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes; part 3: specifications for individual materials; sheet 4: requirements for rigid laminated sheets based on phenolic resins
IEC 60893-3-5:1993 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes; part 3: specifications for individual materials; sheet 5: requirements for rigid laminated sheets based on polyester resins
IEC 60893-3-6:1993 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes; part 3: specifications for individual materials; sheet 6: requirements for rigid laminated sheets based on silicone resins
IEC 60893-3-5:2003 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials; Requirements for rigid laminated sheets based on polyester resins
IEC 60893-3-4:2003 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials; Requirements for rigid laminated sheets based on phenolic resins
IEC 60893-3-2:2003 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials; Requirements for rigid laminated sheets based on epoxide resins
IEC 60893-3-6:2003 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials; Requirements for rigid laminated sheets based on silicone resins

FI-SFS, thermosetting resin teeth

SFS-ISO 4586/2 E:1986 Decorative laminates Sheets based on thermosetting resins.Part 2: Determination of properties

Professional Standard - Energy, thermosetting resin teeth

SY/T 4130 –2016 Construction specification for glass fiber reinforced thermosetting resin field wound vertical storage tank

ZA-SANS, thermosetting resin teeth

SANS 4586-2:1997 High-pressure decorative laminates - Sheets made from thermosetting resins Part 2: Determination of properties

Aerospace, Security and Defence Industries Association of Europe (ASD), thermosetting resin teeth

ASD-STAN PREN 2562-1989 Aerospace Series Unidirectional Laminates Carbon-Thermosetting Resin Flexural Test (Issue P 1)

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, thermosetting resin teeth

PREN 2562-1989 Aerospace Series Unidirectional Laminates Carbon-Thermosetting Resin Flexural Test (Issue P 1)

Canadian Standards Association (CSA), thermosetting resin teeth

CSA C22.2 NO.2515.1-2013 Supplemental requirements for extra heavy wall (XW) reinforced thermosetting resin conduit (RTRC) and fittings (First Edition)

YU-JUS, thermosetting resin teeth

JUS G.C2.600-1985 Plastics. Industrial laminated sheets based on thermosetting resins. Specification

GOSTR, thermosetting resin teeth

GOST R 57995-2017 Composite polymers. Determination of curing behavior of thermosetting resins by dynamic mechanical procedures using a rheometer

CENELEC - European Committee for Electrotechnical Standardization, thermosetting resin teeth

EN 60893-3-2:1995 Specification for Industrial Rigid Laminated Sheets Based on Thermosetting Resins for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 2: Requirements for Rigid Laminated Sheets Based on Epoxide Resins (Includes Corrigendum 1995)
EN 60893-3-4:1995 Specification for Industrial Rigid Laminated Sheets Based on Thermosetting Resins for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 4: Requirements for Rigid Laminated Sheets Based on Phenolic Resins (Includes Corrigendum 1995)
EN 60893-3-5:1995 Specification for Industrial Rigid Laminated Sheets Based on Thermosetting Resins for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 5: Requirements for Rigid Laminated Sheets Based on Polyester Resins
EN 60893-3-6:1995 Specification for Industrial Rigid Laminated Sheet Based on Thermosetting Resins for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 6: Requirements for Rigid Laminated Sheets Based on Silicone Resins