ZH
RU
ES

Fast Thermosetting Resin

Fast Thermosetting Resin, Total:498 items.

In the international standard classification, Fast Thermosetting Resin involves: Plastics, Products of the chemical industry, Interior finishing, Insulating materials, Analytical chemistry, Protection of and in buildings, Reinforced plastics, Paints and varnishes, Materials and components for railway engineering, Pipeline components and pipelines, Rubber and plastics products, Fluid power systems, Wood-based panels, Elements of buildings, Materials for aerospace construction, Small craft, Fluid storage devices, External sewage systems, Equipment for the chemical industry, Storage equipment, Organic chemicals, Electrical accessories, Railway rolling stock, Shipbuilding and marine structures in general, Wind turbine systems and other alternative sources of energy, Water quality, Surface treatment and coating, Vocabularies.


Society of Automotive Engineers (SAE), Fast Thermosetting Resin

  • SAE ARP5144-2011 Heat Application for Thermosetting Resin Curing
  • SAE AMS3727A-1993 RESIN, EPOXY, MATRIX, THERMOSETTING Moderate Temperature Resistant, Unfilled
  • SAE AMS3727-1988 RESIN, EPOXY, MATRIX, THERMOSETTING Moderate Temperature Resistant, Unfilled
  • SAE AMS3731/9-1981 POTTING COMPOUND, EPOXY Flexible, Thermal Shock Resistant, Heat Cure
  • SAE AMS3731/9A-1987 POTTING COMPOUND, EPOXY Flexible, Thermal Shock Resistant, Heat Cure
  • SAE AMS3729A-2022 Epoxy Resin Matrix, Thermosetting Moderate Temperature Resistant, Unfilled
  • SAE AMS3642C-2011 PLASTIC MOLDINGS, LAMINATED, THERMOSETTING RESIN Glass Cloth Reinforced Heat Resistant
  • SAE AMS3642D-1998 Plastic Moldings, Laminated, Thermosetting Resin Glass Cloth Reinforced Heat Resistant
  • SAE AMS3731/9B-1993 (Noncurrent)Potting Compound, Epoxy Flexible, Thermal Shock Resistant, Heat Cure
  • SAE AMS3729-2011 EPOXY RESIN MATRIX, THERMOSETTING Moderate Temperature Resistant, Unfilled
  • SAE AMS3641A-1953 PLASTIC MOLDINGS, THERMOSETTING Phenol Formaldehyde, Macerated Fabric Filled
  • SAE AMS3642-1961 PLASTIC MOLDINGS, LAMINATED, THERMOSETTING RESIN, Glass Fabric Reinforced Heat Resistant (500 F)
  • SAE AMS3642A-1965 PLASTIC MOLDINGS, LAMINATED, THERMOSETTING RESIN Glass Fabric Reinforced Heat Resistant, 500 F (260 C)
  • SAE AMS3642B-1976 PLASTIC MOLDINGS, LAMINATED, THERMOSETTING RESIN Glass Fabric Reinforced Heat Resistant, 500°F (260°C)
  • SAE ARP4916-1997 Masking and Cleaning of Epoxy and Polyester Matrix Thermosetting Composite Materials
  • SAE AMS3618-1970 (Noncurrent)Resin, Polyimide, Thermosetting High Heat (290 C (554 F) Resistant) R(1994)
  • SAE ARP4916-2011 MASKING AND CLEANING OF EPOXY AND POLYESTER MATRIX THERMOSETTING COMPOSITE MATERIALS

SAE - SAE International, Fast Thermosetting Resin

Korean Agency for Technology and Standards (KATS), Fast Thermosetting Resin

  • KS M 3337-2009 Laminated thermosetting sheets
  • KS M 3338-2008 Laminated thermosetting rods
  • KS M 3339-2012 Laminated thermosetting tubes
  • KS F 4740-2007 Thermosetting plastic ceiling tile
  • KS F 4740-1999 Thermosetting plastic ceiling tile
  • KS M 3332-2009 Testing methods laminated thermosetting high-pressure decorative sheets
  • KS M 3332-1982 Testing methods laminated thermosetting high-pressure decorative sheets
  • KS M 3550-7-2015 Cured-in-place thermosetting resin tube for renovation of potable water piping system
  • KS M 3550-7-2013 Cured-in-place thermosetting resin tube for renovation of potable water piping system
  • KS M 3550-9-2016 Cured-in-place thermosetting resin tube for renovation of sewer piping system
  • KS M 3550-9-2013 Cured-in-place thermosetting resin tube for renovation of sewer piping system
  • KS M 3550-9-2016(2021) Cured-in-place thermosetting resin tube for renovation of sewer piping system
  • KS M 3550-7-2019 Cured-in-place thermosetting resin tube for renovation of potable water piping system
  • KS M ISO 4586-2:2013 High-pressure decorative laminates — Sheets made from thermosetting resins — Part 2: Determination of properties
  • KS M ISO 4586-2:2007 High-pressure decorative laminates-Sheets made from thermosetting resins-Part 2:Determination of properties
  • KS V ISO 15840-2006(2021) Standard specification for thermosetting resin fiberglass pipe and fittings to be used for marine applications
  • KS M 3500-7-2013 Cured--in--place thermosetting resin tube for renovation of potable water piping system
  • KS V ISO 15840:2006 Standard specification for thermosetting resin fiberglass pipe and fittings to be used for marine applications
  • KS M ISO 4586-1-2012(2017) High-pressure decorative laminates－Sheets made from thermosetting resins－Part 1：Classification and specifications
  • KS C IEC 60893-2:2003 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes-Part 2:Methods of test
  • KS M ISO 4586-1-2012(2022) High-pressure decorative laminates－Sheets made from thermosetting resins－Part 1：Classification and specifications
  • KS M ISO 4586-2-2013(2018) High-pressure decorative laminates — Sheets made from thermosetting resins — Part 2: Determination of properties
  • KS C IEC 60893-3-2:2003 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes-Part 3:Specifications for individual materials-Sheet 2:Requirements for rigid laminated sheets based on epoxide resins
  • KS C IEC 60893-3-3:2003 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes-Part 3:Specifications for individual materials-Sheet 3:Requirements for rigid laminated sheets based on melamine resins
  • KS C IEC 61212-2:2008 Insulating materials-Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes -Part 2:Methods of test
  • KS V ISO 15840-2006(2016) Standard specification for thermosetting resin fiberglass pipe and fittings to be used for marine applications
  • KS C IEC 60893-2-2015(2020) Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes－Part 2：Methods of test
  • KS C IEC 60893-3-3:2018 Insulating materials — Industrial rigid laminated sheets based on thermosetting resins for electrical purposes — Part 3-3: Specifications for individual materials — Requirement for rigid laminated she
  • KS C IEC 60893-3-4:2018 Insulating materials — Industrial rigid laminated sheets based on thermosetting resins for electrical purposes — Part 3-4: Specifications for individual materials — Requirement for rigid laminated she
  • KS C IEC 60893-3-6:2003 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes-Part 3:Specifications for individual materials-Sheet 6:Requirements for rigid laminated sheets based on silicone resins
  • KS C IEC 60893-3-6-2015(2020) Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes－Part 3：Specifications for individual materials－Sheet 6：Requirements for rigid laminated sheets
  • KS C IEC 60893-3-6:2015 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes－Part 3：Specifications for individual materials－Sheet 6：Requirements for rigid laminated sheets based on silicone resins
  • KS C IEC 60893-3-7:2003 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes-Part 3:Specifications for individual materials-Sheet 7:Requirements for rigid laminated sheets based on polyimide resins
  • KS C IEC 60893-3-7:2015 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes－Part 3：Specifications for individual materials－Sheet 7：Requirements for rigid laminated sheets based on polyimide resins
  • KS C IEC 60893-3-5:2003 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes-Part 3:Specifications for individual materials-Sheet 5:Requirements for rigid laminated sheets based on polyester resins
  • KS C IEC 60893-3-4:2003 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes－Part 3：Specifications for individual materials－Sheet 4：Requirements for rigid laminated sheets based on phenolic resins
  • KS C IEC 60893-3-5-2015(2020) Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes－Part 3：Specifications for individual materials－Sheet 5：Requirements for rigid laminated sheets
  • KS C IEC 60893-3-5:2015 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes－Part 3：Specifications for individual materials－Sheet 5：Requirements for rigid laminated sheets based on polyester resins
  • KS C IEC 60893-3-6:2022 Insulating materials — Industrial rigid laminated sheets based on thermosetting resins for electrical purposes — Part 3-6: Specifications for individual materials — Requirements for rigid laminated sh
  • KS C IEC 60893-3-7-2015(2020) Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes－Part 3：Specifications for individual materials－Sheet 7：Requirements for rigid laminated sheets
  • KS C IEC 60893-3-2:2018 Insulating materials — Industrial rigid laminated sheets based on thermosetting resins for electrical purposes — Part 3-2: Specifications for individual materials — Requirement for rigid laminated she
  • KS M ISO 4586-1:2012 High-pressure decorative laminates－Sheets made from thermosetting resins－Part 1：Classification and specifications
  • KS C IEC 61212-1:2008 Insulating materials－Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes－Part 1：General requirements

Taiwan Provincial Standard of the People's Republic of China, Fast Thermosetting Resin

  • CNS 11366-1985 Decorative Laminated Sheet Based on Thermosetting Resins
  • CNS 11367-1985 Method of Test for Decorative Laminated Sheet Based on Thermosetting Resins

RU-GOST R, Fast Thermosetting Resin

  • GOST 28746-1990 Moulding compounds and casting thermosetting resins. Accelerated test method for heating resistance
  • GOST R 57694-2017 Polymer composites. Method for determination of curing characteristics of thermosetting resins
  • GOST R 52078-2003 Wood particle boards, laminated with paper impregnated with thermosetting resins
  • GOST 32289-2013 Wood particleboards, laminated with paper impregnated with thermosetting resins
  • GOST R 56818-2015 Polymer composites. Determination of chemical resistance of thermosetting resins
  • GOST R 57697-2017 Polymer composites. Method for determination of curing properties of pultrusion resins by thermal analysis
  • GOST R 57917-2017 Polymer composites. Determination of dynamic viscosity of thermosetting resins by the sinusoidal method
  • GOST 29170.1-1991 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Definitions, designations and general requirements
  • GOST R 55927-2013 Fiberboards of a dry method of production, laminated with paper impregnated with thermosetting resins. Technical specifications
  • GOST R ISO 10467-2013 Glass-reinforced thermosetting plastics piping systems based on unsaturated poliester resins for pressure and non-pressure drainage and severage. General technical requirements

British Standards Institution (BSI), Fast Thermosetting Resin

  • BS ISO 4216:2021 Thermosetting resin and UV curable resin. Determination of shrinkage by continuous measurement method
  • 20/30412517 DC BS ISO 4216. Thermosetting resin and UV curable resin. Determination of shrinkage by continuous measurement method
  • BS EN ISO 8130-8:1995 Coating powders. Assessment of the storage stability of thermosetting powders
  • BS 7332:1990 Specification for decorative continuous laminates (DCL) based on thermosetting resins
  • BS EN ISO 8130-8:2010 Coating powders. Assessment of the storage stability of thermosetting powders
  • BS EN ISO 9771:1997 Plastics. Phenolic resins. Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions
  • BS EN 60893-2:1995 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Methods of test
  • BS PD IEC/TR 60893-4:2014 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Typical values
  • BS EN 61212-1:1996 Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - General requirements
  • BS EN 60893-3-7:2004+A1:2009 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Requirements for rigid laminated sheets based on polyimide resins
  • BS EN 60893-3-6:2004+A1:2009 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Requirements for rigid laminated sheets based on silicone resins
  • BS EN 60893-3-5:2004+A1:2009 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Requirements for rigid laminated sheets based on polyester resins
  • BS EN 60893-2:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Methods of test
  • BS EN 61212-2:1996 Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Methods of test
  • BS EN 438-2:2005 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Determination of properties
  • BS EN 438-2:2016 High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates). Determination of properties
  • BS EN 61212-2:2007 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Methods of test
  • BS EN 60893-3-2:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins
  • BS EN 60893-3-4:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins
  • BS EN 60893-3-5:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins
  • BS EN 60893-3-6:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
  • BS EN 60893-3-4:2004+A1:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins
  • BS EN 60893-3-2:2004+A1:2011 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Requirements for rigid laminated sheets based on epoxy resins
  • BS EN 60893-3-3:2004+A1:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins
  • BS EN 60893-3-7:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on polymide resins
  • BS 2782-8 Method 835D:1980 Methods of testing plastics - Other properties - Determination of gelation time of thermosetting resins using a hot plate
  • BS EN 438-2:2016+A1:2018 High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates). Determination of properties
  • PD IEC/TR 60893-4:2014+A1:2017 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Typical values
  • BS EN IEC 60893-3-6:2004+A2:2018 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials. Requirements for rigid laminated sheets based on silicone resins
  • BS EN 60893-3-3:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins
  • BS 6374-4:1984 Lining of equipment with polymeric materials for the process industries - Specification for lining with cold curing thermosetting resins
  • BS 6374-3:1984 Lining of equipment with polymeric materials for the process industries - Specification for lining with stoved thermosetting resins
  • BS EN 60893-1:1995 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Definitions, designations and general requirements
  • BS ISO 4586-2:2018 High-pressure decorative laminates (HPL, HPDL). Sheets based on thermosetting resins (usually called laminates). Determination of properties

Hebei Provincial Standard of the People's Republic of China, Fast Thermosetting Resin

Group Standards of the People's Republic of China, Fast Thermosetting Resin

  • T/QWA 001-2016 Particle reinforced thermosetting resin inspection well
  • T/CECS 571-2019 Technical specification for the application of particle-reinforced thermosetting resin inspection wells
  • T/CFA 0202014-2021 Hardener for thermosetting phenolic resin used for foundry sand mold (core) of binder jetting process

International Organization for Standardization (ISO), Fast Thermosetting Resin

  • ISO 4216:2021 Thermosetting resin and UV curable resin — Determination of shrinkage by continuous measurement method
  • ISO 1642:1975 Title missing - Legacy paper document
  • ISO 1642:1987 Plastics; Industrial laminated sheets based on thermosetting resins; Specification
  • ISO 1642:1979 Plastics — Industrial laminated sheets based on thermosetting resins — Specification
  • ISO 4586-1:1981 Plastics — Decorative laminated sheets based on thermosetting resins — Part 1: Specification
  • ISO 4586-2:1981 Plastics — Decorative laminated sheets based on thermosetting resins — Part 2: Determination of properties
  • ISO 4586-2:2004 High-pressure decorative laminates - Sheets made from thermosetting resins - Part 2: Determination of properties
  • ISO 4586-2:1997/Amd 6:2003 High-pressure decorative laminates - Sheets made from thermosetting resins - Part 2: Determination of properties; Amendment 6: Resistance to wet heat
  • ISO 4586-1:2004 High-pressure decorative laminates - Sheets made from thermosetting resins - Part 1: Classification and specifications
  • ISO/TR 10465-1:1993 Underground installation of flexible glass-reinforced thermosetting resin (GRP) pipes; part 1: installation procedures
  • ISO 4586-1:1987 Decorative high-pressure laminates (HPL); Sheets based on thermosetting resins; Part 1 : Specification
  • ISO 4586-2:1997/Amd 3:2002 High-pressure decorative laminates - Sheets made from thermosetting resins - Part 2: Determination of properties; Amendment 3: Lightfastness
  • ISO 4586-2:1997/Amd 4:2000 High-pressure decorative laminates - Sheets made from thermosetting resins - Part 2: Determination of properties; Amendment 4: Resistance to surface wear
  • ISO 4586-2:1997/Amd 5:2002 High-pressure decorative laminates - Sheets made from thermosetting resins - Part 2: Determination of properties; Amendment 5: Resistance to scratching

United States Navy, Fast Thermosetting Resin

Association Francaise de Normalisation, Fast Thermosetting Resin

  • NF F19-478:1989 Rolling stock. Thermo setting powder paints made of epoxy resins.
  • NF EN ISO 9771:1997 Plastiques - Résines phénoliques - Détermination de l'élévation de température pseudoadiabatique des résols liquides thermodurcis en conditions acides.
  • NF F19-477:1991 Railway rolling stock. Thermo setting powder paints made of polyester resins.
  • NF L17-451:1988 Aéronautique et espace - Préimprégnés de résine thermodurcissable - Analyse thermique différentielle - Méthode d'essai.
  • NF J95-046-1:2001 Small craft - Hull construction and scantlings - Part 1 : materials : thermosetting resins, glass-fibre reinforcement, reference laminate.
  • NF L17-452:1988 Aerospace. Fabric pre-impregnated with thermosetting resin. Perpendicular tensile resistance test.
  • NF L17-455:1988 Aéronautique et espace - Matériaux composites à base de préimprégnés de résine thermodurcissable - Résistance au pelage.
  • NF F31-447:1989 Rolling stock. Laminated panels with decorated surface, made of thermosetting resins.
  • NF T30-499-8:2011 Coating powders - Part 8 : assessment of the storage stability of thermosetting powders.
  • NF T30-499-8*NF EN ISO 8130-8:2021 Coating powders - Part 8 : assessment of the storage stability of thermosetting powders
  • NF C26-183-6/A2*NF EN IEC 60893-3-6/A2:2018 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6 : specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
  • NF EN 2833-005:2014 Série aérospatiale - Préimprégnés de verre textile/résine thermodurcissable - Spécification technique - Partie 005 : verre textile/résine phénolique préimprégnés
  • NF C26-183-2*NF EN 60893-3-2:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2 : specification for individual materials - Requirements for rigid laminated sheets based on epoxy resins.
  • NF C26-183-3*NF EN 60893-3-3:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3 : specification for individual materials - Requirements for rigid laminated sheets based on melamine resins
  • NF C26-183-6/A1*NF EN 60893-3-6/A1:2010 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6 : Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins.
  • NF C26-183-5/A1*NF EN 60893-3-5/A1:2009 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5 : Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins
  • NF C26-183-2/A1*NF EN 60893-3-2/A1:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2 : specification for individual materials - Requirements for rigid laminated sheets based on epoxy resins
  • NF C26-183-4/A1*NF EN 60893-3-4/A1:2013 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4 : specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins
  • NF C26-183-7/A1*NF EN 60893-3-7/A1:2010 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7 : Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins.
  • NF EN 60893-2:2004 Matériaux isolants - Stratifiés industriels rigides en planches à base de résines thermodurcissables à usages électriques - Partie 2 : méthodes d'essai
  • XP PR EN 2833-2:1995 Série aérospatiale - Préimprégnés de verre textile/résine thermodurcissable - Spécification technique - Partie 2 : verre textile/résine époxy préimprégnée avec une température de polymérisation jusqu'à 125 degrés Celsius utilisation co...
  • NF T57-151:1978 Glass textile reinforced plastics. Preparation of sheets of thermosetting resins with unidirectional reinforcement for tensile test specimens.
  • NF T54-301-1:1991 Decorative high-pressure laminates (hpl). Sheets based on thermosetting resins. Part 1 : specifications.
  • XP PR EN 2833-1:1995 Série aérospatiale - Préimprégnés de verre textile/résine thermodurcissable - Spécification technique - Partie 1 : généralités.
  • NF T54-301-2:1991 Decorative high-pressure laminates (hpl). Sheets based on thermosetting resins. Part 2 : determination of properties.
  • NF C26-183-6*NF EN 60893-3-6:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6 : specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
  • NF EN 438-1:2016 Stratifiés décoratifs haute pression (HPL) - Plaques à base de résines thermodurcissables (communément appelées stratifiés) - Partie 1 : introduction et informations générales
  • NF C26-182:1994 Specification for industrial rigide laminated sheets based on thermosetting resins for electrical purposes. Part 2 : methods of test.
  • NF EN 13329/IN2:2021 Revêtements de sol stratifiés - Eléments dont la surface est à base de résines aminoplastes thermodurcissables - Spécifications, exigences et méthodes d'essai
  • NF EN 13329+A2:2021 Revêtements de sol stratifiés - Eléments dont la surface est à base de résines aminoplastes thermodurcissables - Spécifications, exigences et méthodes d'essai
  • NF EN 13329/IN1:2017 Revêtements de sol stratifiés - Éléments dont la surface est à base de résines aminoplastes thermodurcissables - Spécifications, exigences et méthodes d'essai

American Society of Mechanical Engineers (ASME), Fast Thermosetting Resin

  • ASME NM.2-2020 Glass-Fiber-Reinforced Thermosetting-Resin Piping Systems

American National Standards Institute （ANSI), Fast Thermosetting Resin

  • ASME NM.2-2022 Fiber-Reinforced Thermosetting-Resin Piping Systems
  • ANSI/ASTM D5813:2004 Specification for Cured-in-place Thermosetting Resin Sewer Piping Systems
  • ANSI/ASME NM.2-2020 Glass-Fiber-Reinforced Thermosetting-Resin Piping Systems
  • ANSI/ASTM D4473:2001 Measuring the Cure Behavior of Thermosetting Resins Using Dynamic Mechanical Properties (08.03)
  • ANSI/ASTM D3517:2011 Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
  • ANSI/ASTM D2471:1999 Test Method for Gel Time and Peak Exothermic Temperature of Reacting Thermosetting Resins (08.02)
  • ANSI/ASTM D3262:2011 Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
  • ANSI/ASTM D2996:2001 Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe
  • ANSI/ASTM D3982:2008 Specification for Contact Molded "fiberglass " Glass Fiber Reinforced Thermosetting Resin Duct and Hoods
  • ANSI/ASTM D5685:2011 Specification for Fiberglass Glass-Fiber-Reinforced Thermosetting-Resin Pressure Pipe Fittings
  • ANSI/ASTM D4097:2018 Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
  • ANSI/ASTM D3262:2016 Standard Specification for ��Fiberglass�� (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
  • ANSI/ASTM D2997:2015 Standard Specification for Centrifugally Cast ��Fiberglass�� (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
  • ANSI/ASTM D3839:2008 Practice for Underground Installation of Flexible Reinforced Thermosetting Resin Pipe and Reinforced Plastic Mortar Pipe (08.04)
  • ANSI/ASTM D4161:2006 Specification For "fiberglass" Glass-fiber-reinforced Thermosetting-resin Pipe Joints Using Flexible Elastomeric Seals
  • ANSI/ASTM D3839:2014 Standard Guide for Underground Installation of ��Fiberglass�� (Glass-Fiber Reinforced Thermosetting-Resin) Pipe
  • ANSI/ASTM D5421:2005 Specification for Contact Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
  • ANSI/ASTM D3754:2011 Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe
  • ANSI/ASTM D5421:2015 Standard Specification for Contact Molded ��Fiberglass�� (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
  • ANSI/UL 1684A-2006 Standard for Safety for Supplemental Requirements for Extra Heavy Wall Reinforced Thermosetting Resin Conduit (RTRC) and Fittings
  • ANSI/ASTM D4398:2007 Test Method for Determining the Chemical Resistance of Fiberglas-Reinforced Thermosetting Resins by One-Side Panel Exposure
  • ANSI/UL 2515-2014 Standard for Safety for Aboveground Reinforced Thermosetting Resin Conduit (RTRC) and Fittings (Proposal dated 9-20-2013)
  • ANSI/UL 2420a-2012 Standard for Safety for Belowground Reinforced Thermosetting Resin Conduit (RTRC) and Fittings (Proposal dated 6-22-2012)
  • ANSI/ASTM D3840:2014 Standard Specification for ��Fiberglass�� (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications
  • ANSI/UL 2420-2012 Standard for Safety for Belowground Reinforced Thermosetting Resin Conduit (RTRC) and Fittings (Proposal dated 6-22-2012)
  • ANSI/ASTM C581:2003 Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service
  • ANSI/ASTM C581:2015 Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service
  • ANSI/ASTM D6041:2012 Specification for Contact-Molded Fiberglass (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings

American Society for Testing and Materials (ASTM), Fast Thermosetting Resin

  • ASTM D4640-86(1996) Standard Test Method for Determining Stroke Cure Time of Thermosetting Phenol-Formaldehyde Resins
  • ASTM D5813-95 Standard Specification for Cured-In-Place Thermosetting Resin Sewer Pipe
  • ASTM D709-16 Standard Specification for Laminated Thermosetting Materials
  • ASTM D2566-86 Test Method for Linear Shrinkage of Cured Thermosetting Casting Resins During Cure
  • ASTM D5813-04(2018) Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems
  • ASTM D3262-04 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
  • ASTM D3262-03 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
  • ASTM D3517-04 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
  • ASTM D3517-03 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
  • ASTM D5813-04 Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems
  • ASTM D5813-04(2008) Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems
  • ASTM D5813-04(2012) Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems
  • ASTM D5028-96(2003) Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis
  • ASTM D4640-86(2022) Standard Test Method for Determining Stroke Cure Time of Thermosetting Phenol-Formaldehyde Resins
  • ASTM D5028-17 Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis
  • ASTM D3262-06 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
  • ASTM D3517-06 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
  • ASTM E1118/E1118M-16 Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP)
  • ASTM E1118/E1118M-16(2020) Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP)
  • ASTM D4640-86(2009) Standard Test Method for Determining Stroke Cure Time of Thermosetting Phenol-Formaldehyde Resins
  • ASTM D4640-86(2001) Standard Test Method for Determining Stroke Cure Time of Thermosetting Phenol-Formaldehyde Resins
  • ASTM D4640-86(2017) Standard Test Method for Determining Stroke Cure Time of Thermosetting Phenol-Formaldehyde Resins
  • ASTM F1173-95 Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications
  • ASTM F1173-01 Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications
  • ASTM F1173-01(2006) Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications
  • ASTM D5685-01 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
  • ASTM F1173-01(2023) Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications
  • ASTM D3517-19 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
  • ASTM D5685-19 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
  • ASTM D2471-99 Standard Test Method for Gel Time and Peak Exothermic Temperature of Reacting Thermosetting Resins
  • ASTM E1118-05 Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP)
  • ASTM D5028-96(2003)e1 Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis
  • ASTM D5028-96 Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis
  • ASTM D5028-09 Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis
  • ASTM D2924-01(2006) Standard Test Method for External Pressure Resistance of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
  • ASTM D2924-01 Standard Test Method for External Pressure Resistance of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
  • ASTM D2924-99 Standard Test Method for External Pressure Resistance of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
  • ASTM D4097-18 Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
  • ASTM D4097-95ae3 Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
  • ASTM D2924-12 Standard Test Method for External Pressure Resistance of ldquo;Fiberglassrdquo; (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
  • ASTM D4097-19 Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
  • ASTM D3299-18 Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
  • ASTM D3299-08 Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
  • ASTM D2105-01(2019) Standard Test Method for Longitudinal Tensile Properties of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
  • ASTM D3299-10 Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
  • ASTM D2996-01 Standard Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
  • ASTM D2996-00 Standard Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
  • ASTM D2996-95 Standard Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
  • ASTM D2996-01(2007)e1 Standard Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
  • ASTM D2105-97 Standard Test Method for Longitudinal Tensile Properties of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
  • ASTM D2105-01 Standard Test Method for Longitudinal Tensile Properties of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
  • ASTM D2105-01(2007)e1 Standard Test Method for Longitudinal Tensile Properties of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
  • ASTM D2310-06(2012) Standard Classification for Machine-Made ldquo;Fiberglassrdquo; (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
  • ASTM D2105-01(2014) Standard Test Method for Longitudinal Tensile Properties of ldquo;Fiberglassrdquo; 40;Glass-Fiber-Reinforced Thermosetting-Resin41; Pipe and Tube
  • ASTM D3262-16 Standard Specification for &x201c;Fiberglass&x201d; (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
  • ASTM D2996-15 Standard Specification for Filament-Wound “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
  • ASTM D2924-12(2017) Standard Test Method for External Pressure Resistance of &x201c;Fiberglass&x201d; (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
  • ASTM D4024-05 Standard Specification for Machine Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
  • ASTM D4024-00 Standard Specification for Machine Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
  • ASTM D3982-03 Standard Specification for Contact Molded "Fiberglass" (Glass Fiber Reinforced Thermosetting Resin) Duct and Hoods
  • ASTM D4024-12 Standard Specification for Machine Made ldquo;Fiberglassrdquo; (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
  • ASTM F1173-01(2018) Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications
  • ASTM D2997-21 Standard Specification for Centrifugally Cast “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
  • ASTM D3754-19 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe
  • ASTM D2996-17 Standard Specification for Filament-Wound &x201c;Fiberglass&x201d; (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
  • ASTM D4161-14(2019) Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals
  • ASTM D7750-23 Standard Test Method for Cure Behavior of Thermosetting Resins by Dynamic Mechanical Procedures using an Encapsulated Specimen Rheometer
  • ASTM D3753-19 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Manholes and Wetwells
  • ASTM D5421-05 Standard Specification for Contact Molded "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
  • ASTM D2997-01 Standard Specification for Centrifugally Cast "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
  • ASTM D2997-99 Standard Specification for Centrifugally Cast "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
  • ASTM D2997-01(2007)e1 Standard Specification for Centrifugally Cast "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
  • ASTM D3840-19 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications
  • ASTM D5421-23 Standard Specification for Contact Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
  • ASTM D3753-20 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Manholes and Wetwells
  • ASTM D2997-15 Standard Specification for Centrifugally Cast “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
  • ASTM D3982-08 Standard Specification for Contact Molded x201C;Fiberglassx201D; (Glass Fiber Reinforced Thermosetting Resin) Ducts
  • ASTM D3982-08(2014) Standard Specification for Contact Molded ldquo;Fiberglassrdquo; 40;Glass Fiber Reinforced Thermosetting Resin41; Ducts
  • ASTM D29-98 Standard Specification for Centrifugally Cast "Fibreglass" (Glass Fiber Reinforced Thermosetting Resin) Pipe
  • ASTM D2924-12(2023) Standard Test Method for External Pressure Resistance of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
  • ASTM D3754-03 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe
  • ASTM D3754-04 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe
  • ASTM D3754-06 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe
  • ASTM D4024-22 Standard Specification for Machine Made “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
  • ASTM D3839-14(2019) Standard Guide for Underground Installation of “Fiberglass” (Glass-Fiber Reinforced Thermosetting-Resin) Pipe
  • ASTM D5365-18 Standard Test Method for Long-Term Ring-Bending Strain of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
  • ASTM D4024-15 Standard Specification for Machine Made “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
  • ASTM D4398-02 Standard Test Method for Determining the Chemical Resistance of Fiberglass-Reinforced Thermosetting Resins by One-Side Panel Exposure
  • ASTM D3982-98 Standard Specification for Contact Molded "Fiberglass" (Glass Fiber Reinforced Thermosetting Resin) Duct and Hoods
  • ASTM D3982-21 Standard Specification for Contact Molded “Fiberglass” (Glass Fiber Reinforced Thermosetting Resin) Ducts
  • ASTM D4161-01 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals
  • ASTM D4161-01(2005) Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals
  • ASTM D4161-01(2010) Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals
  • ASTM D4161-14 Standard Specification for ldquo;Fiberglassrdquo; 40;Glass-Fiber-Reinforced Thermosetting-Resin41; Pipe Joints Using Flexible Elastomeric Seals
  • ASTM F1743-21 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)
  • ASTM D7750-12(2017) Standard Test Method for Cure Behavior of Thermosetting Resins by Dynamic Mechanical Procedures using an Encapsulated Specimen Rheometer
  • ASTM D3840-10 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications
  • ASTM D3840-14 Standard Specification for ldquo;Fiberglassrdquo; 40;Glass-Fiber-Reinforced Thermosetting-Resin41; Pipe Fittings for Nonpressure Applications

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Fast Thermosetting Resin

  • GB/T 26735-2011 Glass fiber reinfoced thermosetting resin spray pipe
  • GB/T 27808-2011 Saturated polyester resins for thermosetting powder coatings
  • GB/T 7911-1999 Decorative high-pressure liminates(HPL)--Sheets based on thermosetting resins
  • GB/T 7911-2013 High-pressure decorative laminates.Sheets made from thermosetting resins
  • GB/T 27809-2011 Bisphenol A epoxy resins for thermosetting powder coatings
  • GB/T 1303.4-2009 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes.Part 4:Requirements for rigid laminated sheets based on epoxy resins
  • GB/T 1303.6-2009 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes.Part 6:Requirements for rigid laminated sheets based on phenolic resins
  • GB/T 1303.7-2009 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes.Part 7:Requirements for rigid laminated sheets based on polyester resins
  • GB/T 1303.8-2009 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes.Part 8:Requirements for rigid laminated sheets based on silicone resins
  • GB/T 1303.9-2009 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes.Part 9:Requirements for rigid laminated sheets based on polyimide resins
  • GB/T 5130-1997 Test methods for industrial rigid laminated sheets based on thermosetting resins for electrical purpose
  • GB/T 23100-2008 Industrial rigid round winded tubes based on thermosetting resins for electrical purposes
  • GB/T 15102-2017(英文版) Surface decorated fiberboard and particleboard with paper impregnated thermosetting resins
  • GB/T 32675-2016 Plastics.Phenolic resins.Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions
  • GB/T 1303.11-2009 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes.Part 11:Requirements for rigid laminated sheets based on polyamide-imide resins
  • GB/T 1303.10-2009 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes.Part 10:Requirements for rigid laminated sheets based on bis-maleimide resins
  • GB/T 34722-2017(英文版) Surface decorated plywood and blockboard with paper impregnated thermosetting resins
  • GB/T 1303.12-2022 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes—Part 12：Typical values
  • GB/T 1303.2-2009 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes.Part 2:Test methods
  • GB/T 32491-2016 Test method for long-term hydrostatic pressure of glass fiber reinforced thermosetting resin pipe and fittings
  • GB/T 18381-2001 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes definitions,designations and general requirements
  • GB/T 5132.1-2009 Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes.Part 1:General requirements
  • GB/T 5132.2-2009 Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes.Part 2:Methods of test
  • GB/T 1303.3-2008 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes.Part 3:Requirements for types of industrial rigid laminated sheets
  • GB/T 1303.1-2009 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes.Part 1:Definitions,designations and general requirements
  • GB/T 1303.2-2002 Specification for industrial rigid laminated Sheets based on thermosetting resins for electrical purposes Part 3: Specifications for individual materials Sheet 3: Requirements for rigid laminated Sheets based on melamine resins

Professional Standard - Building Materials, Fast Thermosetting Resin

  • JC/T 552-2011 Filament-wound thermosetting resin pressured pipe
  • JC 552-1994 Filament winding reinforced thermosetting resin pressure pipe
  • JC/T 1026-2007 Glass fiber reinforced thermosetting resin grating for supporting loads
  • JC/T 587-2012 Filament wound glass fiber reinforced thermoset resin corrosion resistant vertical tanks
  • JC/T 718-2012 Filament wound glass fiber reinforced thermoset resin corrosion resistant horizontal tanks

NEMA - National Electrical Manufacturers Association, Fast Thermosetting Resin

  • NEMA TC 14-2002 Reinforced Thermosetting Resin Conduit (RTRC) and Fittings
  • NEMA TC 14-1984 Filament-Wound Reinforced Thermosetting Resin Conduit and Fittings

SE-SIS, Fast Thermosetting Resin

CZ-CSN, Fast Thermosetting Resin

  • CSN 64 0342-1990 1'lastics. 'JVrrriosetting easting resins. Jetcrinination of viscosity incrrnso of joxy resms (hiriiig cm-hig
  • CSN 64 0810-1983 Testing ol plastics. Dctermination moulding properties of thermosetingresins on the plastometer KK

PL-PKN, Fast Thermosetting Resin

  • PN E29080-1988 Insulating materials Laminated sheets based on thermosetting resins

IN-BIS, Fast Thermosetting Resin

National Electrical Manufacturers Association（NEMA), Fast Thermosetting Resin

  • NEMA TC 14.BG-2015 Belowground Reinforced Thermosetting Resin Conduit (RTRC) and Fittings
  • NEMA TC 14.AG-2015 Aboveground Reinforced Thermosetting Resin Conduit (RTRC) and Fittings
  • NEMA TC 14.XW-2015 Extra Heavy Wall Aboveground Reinforced Thermosetting Resin Conduit (RTRC) and Fittings

API - American Petroleum Institute, Fast Thermosetting Resin

  • API SPEC 15LR-1976 SPECIFICATION FOR REINFORCED THERMOSETTING RESIN LINE PIPE (RTRP) FOURTH EDITION
  • API SPEC 15AR-1981 SPECIFICATION FOR REINFORCED THERMOSETTING RESIN CASING AND TUBING (Second Edition)
  • API STD 5LR-1968 GLASS FIBER REINFORCED THERMOSETTING RESIN LINE PIPE (First Edition)
  • API SPEC 5AR-1981 SPECIFICATION FOR REINFORCED THERMOSETTING RESIN CASING AND TUBING SECOND EDITION (WITHDRAWN)
  • API RP 15A4-1976 Recommended Practice for Care and Use of Reinforced Thermosetting Resin Casing and Tubing (Out of Print)
  • API RP 5A4-1976 RECOMMENDED PRACTICE for CARE AND USE OF REINFORCED THERMOSETTING RESIN CASING AND TUBING (First Edition)
  • API SPEC 5AR-1975 SPECIFICATION FOR REINFORCED THERMOSETTING RESIN CASING AND TUBING (First Edition; Incorporating Supplement: March 1976)
  • API RP 15L4-1976 RECOMMENDED PRACTICE FOR CARE AND USE OF REINFORCED THERMOSETTING RESIN LINE PIPE (RTRP) SECOND EDITION (WITHDRAWN)

Japanese Industrial Standards Committee (JISC), Fast Thermosetting Resin

  • JIS K 7012:2013 Glass-fiber reinforced thermosetting resin chemical-resistant tanks
  • JIS K 7012:1999 Glass-fiber reinforced thermosetting resin chemical-resistant tanks
  • JIS H 8691:2022 Test method of the mold release film for thermosetting resin molds -- Fluorine containing compound mold release film

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Fast Thermosetting Resin

  • GB/T 1303.5-2017 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes—Part 5: Requirements for rigid laminated sheets based on melamine resins

Defense Logistics Agency, Fast Thermosetting Resin

  • DLA MIL-PRF-31032/5 (2)-2011 PRINTED WIRING BOARD, RIGID, MULTILAYERED, THERMOPLASTIC, THERMOSETTING, OR THERMOPLASTIC AND THERMOSETTING RESIN BASE MATERIAL, WITH PLATED THROUGH HOLES, FOR HIGH FREQUENCY APPLICATIONS
  • DLA MIL-PRF-31032/5 A-2012 PRINTED WIRING BOARD, RIGID, MULTILAYERED, THERMOPLASTIC, THERMOSETTING, OR THERMOPLASTIC AND THERMOSETTING RESIN BASE MATERIAL, WITH PLATED THROUGH HOLES, FOR HIGH FREQUENCY APPLICATIONS

(U.S.) Ford Automotive Standards, Fast Thermosetting Resin

  • FORD M3D24-A-1990 EPOXY THERMOSETTING RESIN AND HARDENER - PLASTIC TOOL SURFACE COATING
  • FORD ASL POLYMERS-3D-2020 APPROVED SOURCE LIST (ASL) - CATEGORY POLYMERS - THERMOSETTING (RESINS AND FOAMS)
  • FORD ESE-M4G17-B-2014 SEALER, THERMOSET POLYESTER RESIN ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSF-M2G331-A2-2015 ADHESIVE, EPOXY - ONE COMPONENT - HEAT CURING - STRUCTURAL ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESF-M2G295-A-2014 ADHESIVE, EPOXY - ONE COMPONENT - HEAT CURING - STRUCTURAL ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESF-M2G331-A-2015 ADHESIVE, EPOXY - ONE COMPONENT - HEAT CURING - STRUCTURAL ***TO BE USED WITH FORD WSS-M99P1111-A***

Standard Association of Australia （SAA）, Fast Thermosetting Resin

  • AS 2634:1983 Chemical plant equipment made from glass-fibre reinforced plastics (GRP) based on thermosetting resins

Underwriters Laboratories (UL), Fast Thermosetting Resin

  • UL 1684-1993 UL Standard for Safety Reinforced Thermosetting Resin Conduit (First Edition)
  • UL 1684A-2004 UL Standard for Safety Supplemental Requirements for Extra Heavy Wall Reinforced Thermosetting Resin Conduit (RTRC) and Fittings First Edition; Reprint with revisions through and including January 23, 2007
  • UL 1684 BULLETIN-2004 UL Standard for Safety Reinforced Thermosetting Resin Conduit (RTRC) and Fittings
  • UL 1684 BULLETIN-2011 UL Standard for Safety Reinforced Thermosetting Resin Conduit (RTRC) and Fittings
  • UL 2515A-2011 Supplemental requirements for extra heavy wall reinforced thermosetting resin conduit (RTRC) and fittings
  • UL 2420 BULLETIN-2011 UL Standard for Safety Belowground Reinforced Thermosetting Resin Conduit (RTRC) and Fittings
  • UL 1684-1996 UL Standard for Safety Reinforced Thermosetting Resin Conduit (RTRC) and Fittings (Second Edition)
  • UL 2515-2019 UL Standard for Safety Aboveground Reinforced Thermosetting Resin Conduit (RTRC) and Fittings (Second Edition)
  • UL 1684-2000 UL Standard for Safety Reinforced Thermosetting Resin Conduit (RTRC) and Fittings (Third Edition)
  • UL 1684A BULLETIN-2011 UL Standard for Safety Supplemental Requirements for Extra Heavy Wall Reinforced Thermosetting Resin Conduit (RTRC) and Fittings
  • UL 2515 BULLETIN-2011 UL Standard for Safety Supplemental Requirements for Extra Heavy Wall Reinforced Thermosetting Resin Conduit (RTRC) and Fittings
  • UL 2515A BULLETIN-2011 UL Standard for Safety Supplemental Requirements for Extra Heavy Wall Reinforced Thermosetting Resin Conduit (RTRC) and Fittings

European Committee for Standardization (CEN), Fast Thermosetting Resin

  • EN 1796:2013 Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP)
  • EN 1796:2006 Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) Incorporates Amendment A1: 2008
  • EN 438-2:2005 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called Laminates) - Part 2: Determination of properties
  • prEN 60893-3-7-1992 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes; part 3: specifications for individual materials; sheet 7: specification requirements for laminated sheets based on polyimide resins

AENOR, Fast Thermosetting Resin

  • UNE-EN ISO 9771:1997 PLASTICS. PHENOLIC RESINS. DETERMINATION OF THE PSEUDO-ADIABATIC TEMPERATURE RISE OF LIQUID RESOLS WHEN CURED UNDER ACID CONDITIONS (ISO 9771:1995).
  • UNE-EN 60893-3-6:2004/A1:2010 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
  • UNE-EN 60893-3-4:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins
  • UNE-EN 60893-3-6:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
  • UNE-EN 60893-3-2:2004/A1:2011 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins
  • UNE-EN 60893-3-4:2004/A1:2013 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins
  • UNE-EN 60893-3-3:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins
  • UNE-EN 60893-3-5:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins
  • UNE-EN 60893-3-2:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins
  • UNE-EN 60893-3-5:2004/A1:2010 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins
  • UNE-EN 60893-3-3:2004/A1:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins
  • UNE-IEC/TR 60893-4:2005 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values
  • UNE-EN 60893-3-7:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins
  • UNE-EN 60893-3-7:2004/A1:2010 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins
  • UNE-EN 60893-2:2005 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 2: Methods of test

German Institute for Standardization, Fast Thermosetting Resin

  • DIN EN 60893-3-1 Bb.1:1996 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Comparison of types
  • DIN EN ISO 9771:1997-05 Plastics - Phenolic resins - Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions (ISO 9771:1995); German version EN ISO 9771:1997
  • DIN 65467:1999-03 Aerospace - Testing of thermosetting resin systems with and without reinforcement - DSC method
  • DIN EN 60893-3-5:2010 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins (IEC 60893-3-5:2003 + A1
  • DIN EN 60893-3-2:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins (IEC 60893-3-2:2003 + A1:201
  • DIN EN 60893-3-7:2010 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins (IEC 60893-3-7:2003 + A1
  • DIN EN 60893-2:2005 Insulating materials - Industrial laminated sheets based on thermosetting resins for electrical purposes - Part 2: Methods of test (IEC 60893-2:2003); German version EN 60893-2:2004
  • DIN EN 60893-3-6:2010 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins (IEC 60893-3-6:2003 + A1:
  • DIN IEC/TR 60893-4:2015 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values (IEC/TR 60893-4:2014)
  • DIN EN 438-2:2005 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties; German version EN 438-2:2005

Danish Standards Foundation, Fast Thermosetting Resin

  • DS/EN ISO 9771:1997 Plastics - Phenolic resins - Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions
  • DS/EN 60893-3-2/A1:2011 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins
  • DS/EN 60893-3-2:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins
  • DS/EN 60893-3-4:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins
  • DS/EN 60893-3-5/A1:2009 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins
  • DS/EN 60893-3-5:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins
  • DS/EN 60893-3-6/A1:2010 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
  • DS/EN 60893-3-6:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
  • DS/EN 60893-3-4/A1:2013 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins
  • DS/EN 438-1:1992 Decorative high-pressure laminates (HPL). Sheets based on thermosetting resins. Part 1: Specifications
  • DS/EN 438-2:1992 Decorative high-pressure laminates (HPL). Sheets based on thermosetting resins. Part 2: Determination of properties
  • DS/EN 60893-2:2004 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 2: Methods of test
  • DS/EN 60893-3-3:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins
  • DS/EN 60893-3-3/A1:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins
  • DS/EN 60893-3-7/A1:2010 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins
  • DS/EN 60893-3-7:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins
  • DS/EN 61212-2:2007 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 2: Methods of test

Lithuanian Standards Office , Fast Thermosetting Resin

  • LST EN ISO 9771:2001 Plastics - Phenolic resins - Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions (ISO 9771:1995)
  • LST EN 60893-3-2+A1-2001 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 2: Requirements for rigid laminated sheets based on epoxide resins (IEC 60893-3-2:1993+A1
  • LST EN 60893-3-6-2004/A1-2010 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins (IEC 60893-3-6:2003/A1:2
  • LST EN 60893-3-5-2004/A1-2010 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins (IEC 60893-3-5:2003/A1:
  • LST EN 60893-3-2-2004/A1-2011 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins (IEC 60893-3-2:2003/A1:2011
  • LST EN 60893-3-4-2004/A1-2013 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins (IEC 60893-3-4:2003/A1:2
  • LST EN 60893-3-3-2004/A1-2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins (IEC 60893-3-3:2003/A1:2

American Welding Society (AWS), Fast Thermosetting Resin

  • WRC 415:1996 Literature Survey and Interpretive Study on Thermoplastic and Reinforced-Thermosetting-Resin Piping and Component Standards

AT-ON, Fast Thermosetting Resin

  • ONORM EN 438-1-1993 Decorative high-pressure laminates (HPL) - Sheets based on thermosetting resins - Specification
  • ONORM EN 438-2-1992 Decorative high-pressure laminates (HPL) - Sheets based on thermosetting resins - Determination of properties

Professional Standard - Petroleum, Fast Thermosetting Resin

  • SY/T 0323-2000 Code for construction and acceptance of glass fiber reinforced thermosetting resin pressure pipelines
  • SY/T 4130-2016 Specification for construction of glass fiber reinforced thermosetting resin on-site winding vertical storage tanks
  • SY 4130-2016 Construction specification for glass fiber reinforced thermosetting resin field wound vertical storage tank

国家能源局, Fast Thermosetting Resin

  • NB/T 10654-2021 Test methods for thermosetting epoxy resins for wind turbine blades

WRC - Welding Research Council, Fast Thermosetting Resin

  • BULLETIN 415-1996 LITERATURE SURVEY AND INTERPRETIVE STUDY ON THERMOPLASTIC AND REINFORCED-THERMOSETTING-RESIN PIPING AND COMPONENTS STANDARDS

International Electrotechnical Commission (IEC), Fast Thermosetting Resin

  • IEC 60893-3-2:1998 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for rigid laminated sheets based on epoxide resins
  • IEC 60893-2:2003 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 2: Methods of test
  • IEC 60893-3-2:1993 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes; part 3: specifications for individual materials; sheet 2: requirements for rigid laminated sheets based on epoxide resins
  • IEC 60893-3-6:2009 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
  • IEC 60893-3-6:2017 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
  • IEC 60893-2:1992 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes; part 2: methods of test
  • IEC 60893-3-3:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials; Requirements for rigid laminated sheets based on melamine resins
  • IEC TR 60893-4:2017 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values
  • IEC 60893-3-6:2003+AMD1:2009+AMD2:2017 CSV Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sh
  • IEC 60893-3-6:2003+AMD1:2009 CSV Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sh
  • IEC TR 60893-4:2014/AMD1:2017 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values
  • IEC TR 60893-4:2014 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values
  • IEC TR 60893-4:2003 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values
  • IEC TR 60893-4:2014+AMD1:2017 CSV Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values
  • IEC 60893-3-5:2003/AMD1:2009 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sh
  • IEC 60893-3-4:1993 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes; part 3: specifications for individual materials; sheet 4: requirements for rigid laminated sheets based on phenolic resins
  • IEC 60893-3-5:1993 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes; part 3: specifications for individual materials; sheet 5: requirements for rigid laminated sheets based on polyester resins
  • IEC 60893-3-6:1993 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes; part 3: specifications for individual materials; sheet 6: requirements for rigid laminated sheets based on silicone resins
  • IEC 60893-3-5:2003 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials; Requirements for rigid laminated sheets based on polyester resins
  • IEC 60893-3-4:2003 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials; Requirements for rigid laminated sheets based on phenolic resins
  • IEC 60893-3-2:2003 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials; Requirements for rigid laminated sheets based on epoxide resins
  • IEC 60893-3-6:2003 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials; Requirements for rigid laminated sheets based on silicone resins
  • IEC 60893-3-4:2003+AMD1:2012 CSV Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigid laminated sh
  • IEC 60893-3-2:2003+AMD1:2011 CSV Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sh
  • IEC 60893-3-5:2003+AMD1:2009 CSV Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sh
  • IEC 60893-3-7:1994 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials; sheet 7: Requirements for rigid laminated sheets based on polyimide resins
  • IEC 60893-3-7:2003 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials; Requirements for rigid laminated sheets based on polyimide resins
  • IEC 60893-3-7:2009 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins
  • IEC 61212-1:1995 Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 1: General requirements
  • IEC 61212-2:1995 Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 2: Methods of test
  • IEC 60893-3-2/AMD1:1998 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for rigid laminated sheets based on epoxyde resin; Amendment 1
  • IEC 60893-3-6:2003/AMD1:2009 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins; Amendment 1
  • IEC 60893-3-5:2009 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins
  • IEC 60893-3-4:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials; Requirements for rigid laminated sheets based on phenolic resins
  • IEC 60893-3-6:2003/AMD2:2017 Amendment 2 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigi
  • IEC 60893-3-3/COR2:1997 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes; part 3: specifications for individual materials; sheet 3: requirements for rigid laminated sheets based on melamine resins
  • IEC 60893-3-3:1993 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes; part 3: specifications for individual materials; sheet 3: requirements for rigid laminated sheets based on melamine resins
  • IEC 60893-3-3:2003 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials; Requirements for rigid laminated sheets based on melamine resins
  • IEC 60893-3-3:2003+AMD1:2011 CSV Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sh
  • IEC 60893-3-7:2003+AMD1:2009 CSV Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sh
  • IEC 60893-3-7:2003/AMD1:2009 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins; Amendment 1
  • IEC 60893-3-2:2003/AMD1:2011 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specification for individual materials - Requirements for rigid laminated sheets based on epoxy resins

FI-SFS, Fast Thermosetting Resin

  • SFS-ISO 4586/2 E:1986 Decorative laminates Sheets based on thermosetting resins.Part 2: Determination of properties

Professional Standard - Energy, Fast Thermosetting Resin

  • SY/T 4130 –2016 Construction specification for glass fiber reinforced thermosetting resin field wound vertical storage tank

ZA-SANS, Fast Thermosetting Resin

  • SANS 4586-2:1997 High-pressure decorative laminates - Sheets made from thermosetting resins Part 2: Determination of properties
  • SANS 4586-1:1995 High-pressure decorative laminates - Sheets made from thermosetting resins Part 1: Classification and specifications

Aerospace, Security and Defence Industries Association of Europe (ASD), Fast Thermosetting Resin

  • ASD-STAN PREN 2562-1989 Aerospace Series Unidirectional Laminates Carbon-Thermosetting Resin Flexural Test (Issue P 1)
  • ASD-STAN PREN 2561-1989 Aerospace Series Unidirectional Laminates Carbon-Thermosetting Resin Tensile Test Parallel to the Fibre Direction (Issue P 1)

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Fast Thermosetting Resin

  • PREN 2562-1989 Aerospace Series Unidirectional Laminates Carbon-Thermosetting Resin Flexural Test (Issue P 1)
  • PREN 2597-1990 Aerospace Series Carbon Thermosetting Resin Undirectional Laminates Tensile Test Perpendicular to the Fibre Direction (Issue P 1)
  • PREN 6043-1995 Aerospace Series Thermosetting Resin Systems Test Method Determination of Gel Time and Viscosity (Edition P1)

未注明发布机构, Fast Thermosetting Resin

  • BS 6374-4:1984(1999) Lining of equipment with polymeric materials for the process industries — Part 4 : Specification for lining with cold curing thermosetting resins
  • BS EN 60893-3-4:2004+A1:2012(2014) Insulating materials — Industrial rigid laminated sheets based on thermosetting resins for electrical purposes — Part 3 - 4 : Specifications for individual materials — Requirements for rigid laminated sheets based on phenolic resins

Canadian Standards Association (CSA), Fast Thermosetting Resin

  • CSA C22.2 NO.2515.1-2013 Supplemental requirements for extra heavy wall (XW) reinforced thermosetting resin conduit (RTRC) and fittings (First Edition)

GOSTR, Fast Thermosetting Resin

  • GOST R 57995-2017 Composite polymers. Determination of curing behavior of thermosetting resins by dynamic mechanical procedures using a rheometer

KR-KS, Fast Thermosetting Resin

  • KS C IEC 60893-3-3-2018 Insulating materials — Industrial rigid laminated sheets based on thermosetting resins for electrical purposes — Part 3-3: Specifications for individual materials — Requirement for rigid laminated she
  • KS C IEC 60893-3-4-2018 Insulating materials — Industrial rigid laminated sheets based on thermosetting resins for electrical purposes — Part 3-4: Specifications for individual materials — Requirement for rigid laminated she
  • KS C IEC 60893-3-6-2022 Insulating materials — Industrial rigid laminated sheets based on thermosetting resins for electrical purposes — Part 3-6: Specifications for individual materials — Requirements for rigid laminated sh
  • KS C IEC 60893-3-2-2018 Insulating materials — Industrial rigid laminated sheets based on thermosetting resins for electrical purposes — Part 3-2: Specifications for individual materials — Requirement for rigid laminated she

CENELEC - European Committee for Electrotechnical Standardization, Fast Thermosetting Resin

  • EN 60893-3-2:1995 Specification for Industrial Rigid Laminated Sheets Based on Thermosetting Resins for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 2: Requirements for Rigid Laminated Sheets Based on Epoxide Resins (Includes Corrigendum 1995)
  • EN 60893-3-4:1995 Specification for Industrial Rigid Laminated Sheets Based on Thermosetting Resins for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 4: Requirements for Rigid Laminated Sheets Based on Phenolic Resins (Includes Corrigendum 1995)
  • EN 60893-3-5:1995 Specification for Industrial Rigid Laminated Sheets Based on Thermosetting Resins for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 5: Requirements for Rigid Laminated Sheets Based on Polyester Resins
  • EN 60893-3-6:1995 Specification for Industrial Rigid Laminated Sheet Based on Thermosetting Resins for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 6: Requirements for Rigid Laminated Sheets Based on Silicone Resins
  • EN 60893-2:1994 Specification for Industrial Rigid Laminated Sheets Based on Thermosetting Resins for Electrical Purposes Part 2: Methods of Test
  • EN 60893-3-3:1995 Specification for Industrial Rigid Laminated Sheets Based on Thermosetting Resins for Electrical Purposes Part 3: Specifications for Individual Materials - Sheet 3: Requirements for Rigid Laminated Sheets Based on Melamine Resins (Includes Corrigendum 199
  • EN 60893-3-7:1995 Specification for Industrial Rigid Laminated Sheets Based on Thermosetting Resins for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 7: Requirements for Rigid Laminated Sheets Based on Polymide Resins

European Committee for Electrotechnical Standardization（CENELEC）, Fast Thermosetting Resin

  • EN 60893-3-3:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins (Incorporates Amendment A1:
  • EN 60893-3-6:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins (Incorporates Amendment A1:

US-AAMA, Fast Thermosetting Resin

  • AAMA 624-2007 Voluntary Specification,Performance Requirements and Test Procedures for High Performance Organic Coatings on Fiber Reinforced Thermoset Profiles
  • AAMA 623-2007 Voluntary Specification,Performance Requirements and Test Procedures for Organic Caotings on Fiber Reinforced Thermoset Profiles

  Thermosetting phenolic resin, thermosetting resin teeth, thermosetting resin, Thermosetting resin processing, thermosetting resin, Thermosetting resin injection molding, Thermosetting resin+, Thermosetting resin + injection molding, Initial curing degree of thermosetting resin, Thermosetting resin injection molding, thermosetting resin material, Thermosetting resin properties, Thermosetting Resin Analysis, Fast Thermosetting Resin, Thermosetting Resin Ribbon, thermosetting resin material, Thermosetting resin based industrial rigid lamination for electrical applications, Rapidly Degradable Resin, Thermosetting resin impregnated paper High Pressure Decorative Laminate (HPL), Thermosetting resin industrial rigid laminates for electrical applications.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved