ZH
RU
ES

Oil Particle Size

Oil Particle Size, Total:500 items.

In the international standard classification, Oil Particle Size involves: Petroleum products in general, Particle size analysis. Sieving, Cutting tools, Fuels, Ceramics, Agricultural machines, implements and equipment, Geology. Meteorology. Hydrology, Air quality, Soil quality. Pedology, Test conditions and procedures in general, Products of the chemical industry, Production of metals, Animal feeding stuffs, Insulating fluids, Plastics, Tea. Coffee. Cocoa, Food products in general, Environmental protection, Construction equipment, Optics and optical measurements, Raw materials for rubber and plastics, Analytical chemistry, Internal combustion engines, Rubber, Powder metallurgy, Products of non-ferrous metals, Mining equipment, Road vehicle systems, Road engineering, Construction materials, Fertilizers, Products of the textile industry, Edible oils and fats. Oilseeds, Physics. Chemistry, Paints and varnishes, Shipbuilding and marine structures in general, Cereals, pulses and derived products, Wastes, Power stations in general, Farming and forestry, Inorganic chemicals, Metalliferous minerals, Testing of metals, Diagnostic, maintenance and test equipment, Hydraulic fluids, Materials and components for railway engineering, Paint ingredients, Internal combustion engines for road vehicles, Spices and condiments. Food additives, Valves, Lubricants, industrial oils and related products, Inks. Printing inks, Fluid power systems, Waxes, bituminous materials and other petroleum products, General methods of tests and analysis for food products, Optoelectronics. Laser equipment, Semi-manufactures of timber, Petroleum, petroleum products and natural gas handling equipment, Extraction and processing of petroleum and natural gas, Materials for aerospace construction, Aerospace fluid systems and components, Tobacco, tobacco products and related equipment, Earthworks. Excavations. Foundation construction. Underground works, Mechanical testing, Special purpose vehicles, Vocabularies.

German Institute for Standardization, Oil Particle Size

DIN SPEC 51455:2018 Liquide petroleum products - Determination of particle number and particle size in oils
DIN 51813:2022 Testing of lubricants - Determination of the content of foreign solid matters in lubricating greases - Particle sizes above 25 ？m
DIN CEN/TS 17434:2020-06 Ambient air - Determination of the particle number size distribution of atmospheric aerosol using a Mobility Particle Size Spectrometer (MPSS); German version CEN/TS 17434:2020
DIN 51455:2020 Liquid petroleum products - Determination of particle number and particle size in oils
DIN ISO 9276-2:2018-09 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions (ISO 9276-2:2014)
DIN 51455:2020-12 Liquid petroleum products - Determination of particle number and particle size in oils
DIN ISO 9276-2:2018 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions (ISO 9276-2:2014)
DIN ISO 9276-2:2006 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions (ISO 9276-2:2001);English version of DIN ISO 9276-2:2006-02
DIN ISO 22412:2018 Particle size analysis - Dynamic light scattering (DLS) (ISO 22412:2017)
DIN EN ISO 17829:2016-03 Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2015); German version EN ISO 17829:2015
DIN CEN/TS 17760:2022-07 Inorganic fertilizers - Determination of particle size of ammonium nitrate fertilizers of high nitrogen content; German version CEN/TS 17760:2022
DIN EN 12457-2:2003 Characterization of waste - Leaching; Compliance test for leaching of granular and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg with particle size below 4 mm (without or with size reduction); German version EN 12457-2:2002
DIN EN 12457-1:2003 Characterization of waste - Leaching; Compliance test for leaching of granular and sludges - Part 1: One stage batch test at a liquid to solid ration of 2 l/kg with particle size below 4 mm (without or with size reduction); German version EN 12457-1:2002
DIN ISO 9286:2020-12 Abrasive grains and crude - Chemical analysis of silicon carbide (ISO/DIS 9286:2020); Text in German and English / Note: Date of issue 2020-11-20*Intended as replacement for DIN ISO 9286 (1998-01).
DIN EN 12457-4:2003 Characterization of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with limited size redu
DIN EN ISO 17829:2016 Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2015)
DIN ISO 7708:1996-01 Air quality - Particle size fraction definitions for health-related sampling (ISO 7708:1995)
DIN 65668:1998-08 Aerospace series - Dilution of oils for the purpose of particles counting
DIN ISO 9286:1998-01 Abrasive grains and crude - Chemical analysis of silicon carbide (ISO 9286:1997) / Note: To be replaced by DIN ISO 9286 (2020-12).
DIN ISO 9286:2023-10 Abrasive grains and crude - Chemical analysis of silicon carbide (ISO 9286:2021)
DIN 51813:2016 Testing of lubricants - Determination of the content of foreign solid matters in lubricating greases - Particle sizes above 25 μm
DIN 51813:2022-08 Testing of lubricants - Determination of the content of foreign solid matters in lubricating greases - Particle sizes above 25 µm
DIN EN 14530:2004 Workplace atmospheres - Determination of diesel particulate matter - General requirements; German version EN 14530:2004
DIN 65668:1998 Aerospace series - Dilution of oils for the purpose of particles counting
DIN EN 14530:2004-06 Workplace atmospheres - Determination of diesel particulate matter - General requirements; German version EN 14530:2004
DIN EN 12457-3:2021 Characterization of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 3: Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with high solid content with particle size below 4 mm
DIN EN 12457-3:2003 Characterization of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 3: Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with high solid content with particle size below 4 mm (
DIN CEN/TS 15439:2006 Biomass gasification - Tar and particles in product gases - Sampling and analysis; German version CEN/TS 15439:2006
DIN CEN/TS 15439:2006-08 Biomass gasification - Tar and particles in product gases - Sampling and analysis; German version CEN/TS 15439:2006

International Organization for Standardization (ISO), Oil Particle Size

ISO 19430:2016 Particle size analysis - Particle tracking analysis (PTA) method
ISO 728:1981 Coke (nominal top size greater than 20 mm); Size analysis
ISO 9276-2:2001 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
ISO 9276-2:2014 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
ISO 21501-3:2007 Determination of particle size distribution - Single particle light interaction methods - Part 3: Light extinction liquid-borne particle counter
ISO 21501-2:2007 Determination of particle size distribution - Single particle light interaction methods - Part 2: Light scattering liquid-borne particle counter
ISO 22412:2017 Particle size analysis - Dynamic light scattering (DLS)
ISO/DIS 19430 Determination of particle size distribution and number concentration by particle tracking analysis (PTA)
ISO 17867:2015 Particle size analysis - Small-angle X-ray scattering
ISO 21501-4:2007 Determination of particle size distribution - Single particle light interaction methods - Part 4: Light scattering airborne particle counter for clean spaces
ISO 21501-4:2018 Determination of particle size distribution - Single particle light interaction methods - Part 4: Light scattering airborne particle counter for clean spaces
ISO 21501-1:2009 Determination of particle size distribution - Single particle light interaction methods - Part 1: Light scattering aerosol spectrometer
ISO 21501-4:2018/Amd 1:2023 Determination of particle size distribution — Single particle light interaction methods — Part 4: Light scattering airborne particle counter for clean spaces — Amendment 1
ISO 8511:1995 Rubber compounding ingredients - Carbon black - Determination of pellet size distribution
ISO 4497:2020 Metallic powders — Determination of particle size by dry sieving
ISO 7708:1995 Air quality - Particle size fraction definitions for health-related sampling
ISO 3852:1977 Iron ores (maximum particle size 40 mm or smaller) — Determination of bulk density
ISO 16232-9:2007 Road vehicles - Cleanliness of components of fluid circuits - Part 9: Particle sizing and counting by automatic light extinction particle counter
ISO 5464:1980 Iron ores — Determination of bulk density for ores of maximum particle size larger than 40 mm
ISO 13319-1:2021 Determination of particle size distribution - Electrical sensing zone method - Part 1: Aperture/orifice tube method
ISO/TS 13353:2002 Diesel fuel and petrol filters for internal combustion engines - Initial efficiency by particle counting
ISO 4406:1999 Hydraulic fluid power - Fluids - Method for coding the level of contamination by solid particles
ISO 4406:2021 Hydraulic fluid power - Fluids - Method for coding the level of contamination by solid particles
ISO 20927:2019 Rubber compounding ingredients — Precipitated silica — Determination of aggregate size distribution by disc centrifuge
ISO/TS 17892-4:2004/Cor 1:2006 Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution
ISO/TS 17892-4:2004 Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution
ISO 17892-4:2016 Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution
ISO 4405:1991 Hydraulic fluid power; fluid contamination; determination of particulate contamination by the gravimentric method

British Standards Institution (BSI), Oil Particle Size

BS ISO 19430:2016 Particle size analysis. Particle tracking analysis (PTA) method
BS ISO 9276-2:2001 Representation of results of particle size analysis - Calculation of average particle sizes/diameters and moments from particle size distributions
BS ISO 9276-2:2014 Representation of results of particle size analysis. Calculation of average particle sizes/diameters and moments from particle size distributions
PD CEN/TS 17434:2020 Ambient air. Determination of the particle number size distribution of atmospheric aerosol using a Mobility Particle Size Spectrometer (MPSS)
BS ISO 17867:2015 Particle size analysis. Small-angle X-ray scattering
BS DD CEN/TS 15415:2006 Solid recovered fuels - Determination of particle size and particle size distribution by screen method
BS DD ISO/TS 13762:2002 Particle size analysis - Small angle X-ray scattering method
BS ISO 8486-1:1997 Bond abrasives. Determination and designation of grain size distribution. Macrogrits F4 to F220
BS ISO 8486-1:1996 Bond abrasives. Determination and designation of grain size distribution. Macrogrits F4 to F220
BS ISO 1304:2006 Rubber compounding ingredients - Carbon black - Determination of iodine adsorption number
BS ISO 1304:2016 Rubber compounding ingredients. Carbon black. Determination of iodine adsorption number
BS ISO 16232-9:2007 Road vehicles - Cleanliness of components of fluid circuits - Particle sizing and counting by automatic light extinction particle counter
BS EN 12697-2:2015 Bituminous mixtures. Test methods. Determination of particle size distribution
BS EN 12697-2:2015+A1:2019 Bituminous mixtures. Test methods. Determination of particle size distribution
PD ISO/TS 23151:2021 Nanotechnologies. Particle size distribution for cellulose nanocrystals
PD CEN/TS 17760:2022 Inorganic fertilizers. Determination of particle size of ammonium nitrate fertilizers of high nitrogen content
BS EN ISO 28439:2011 Workplace atmospheres. Characterization of ultrafine aerosols/nanoaerosols. Determination of the size distribution and number concentration using differential electrical mobility analysing systems
BS ISO 4701:2008 Iron ores and direct reduced iron. Determination of size distribution by sieving
BS ISO 13319-1:2021 Determination of particle size distribution. Electrical sensing zone method. Aperture/orifice tube method
14/30299922 DC BS ISO 18451-3. Pigments, dyestuffs and extenders. Terminology. Part 3. Particle size
PD ISO/TR 22681:2019 Hydraulic fluid power. Impact and use of ISO 11171:2016 µm(b) and µm(c) particle size designations on particle count and filter test data
BS EN 12697-2:2002 Bituminous mixtures — Test methods for hot mix asphalt — Part 2: Determination of particle size distribution
BS 3900-J2:1993 Methods of test for paints - Testing of coating powders - Determination of particle size distribution of coating powders by sieving
BS 3900-J13:2001 Methods of test for paints - Testing of coating powders - Particle size analysis by laser diffraction
BS EN 725-5:2007 Advanced technical ceramics - Methods of test for ceramic powders - Determination of particle size distribution
BS 5540-6:1990 Evaluating particulate contamination of hydraulic fluids - Method of calibrating liquid automatic particle-count instruments (using mono-sized latex spheres)
BS ISO 4406:2000 Hydraulic fluid power - Fluids - Method for coding the level of contamination by solid particles
BS ISO 4406:2017 Hydraulic fluid power. Fluids. Method for coding the level of contamination by solid particles
BS ISO 4406:1999 Hydraulic fluid power - Fluids - Method for coding the level of contamination by solid particles
BS ISO 4406:2021 Hydraulic fluid power. Fluids. Method for coding the level of contamination by solid particles
BS ISO 9286:2021 Tracked Changes. Abrasive grains and crude. Chemical analysis of silicon carbide
BS ISO 4659:2020 Styrene-butadiene rubber (carbon black or carbon black and oil masterbatches). Evaluation procedure
BS ISO 23202:2006 Aluminium oxide used for the production of aluminium. Determination of particles passing a 20 micrometre aperture sieve
20/30400951 DC BS ISO 9286. Abrasive grains and crude. Chemical analysis of silicon carbide
BS 3406-4:1993 Methods for determination of particle size distribution - Guide to microscope and image analysis methods
BS ISO 16232-7:2007 Road vehicles - Cleanliness of components of fluid circuits - Particle sizing and counting by microscopic analysis
BS EN 14530:2004(2009) Workplace atmospheres - Determination of diesel particulate matter - General requirements
BS EN 14530:2004 Workplace atmospheres - Determination of diesel particulate matter - General requirements
BS 5540-3:1978 Specification for evaluating particulate contamination of hydraulic fluids - Methods of bottling fluid samples
19/30390587 DC BS ISO 13319-1. Determination of particle size distribution. Electrical sensing zone method. Part 1. Aperture/orifice tube method
BS DD CEN/TS 15439:2006 Biomass gasification — Tar and particles in product gases — Sampling and analysis
BS PD CEN/TR 17548:2020 Automotive fuels. Diesel fuel market issues. Abrasive particles investigation report
BS DD CEN/TS 15439:2007 Biomass gasification. Tar and particles in product gases Sampling and analysis
20/30406551 DC BS ISO 4659. Styrene-butadiene rubber (carbon black or carbon black and oil masterbatches). Evaluation procedure
BS EN 933-2:2020 Tests for geometrical properties of aggregates - Determination of particle size distribution. Test sieves, nominal size of apertures
18/30332191 DC BS ISO 11277. Soil quality. Determination of particle size distribution in mineral soil material. Method by sieving and sedimentation
DD CEN/TS 15439:2006 Biomass gasification. Tar and particles in product gases. Sampling and analysis
21/30436582 DC BS EN 15238. Soil improvers and growing media. Determination of quantity for materials with particle size greater than 60 mm

SAE - SAE International, Oil Particle Size

SAE J391-1969 Definition for Particle Size
SAE ARP6223-2015 Oil Carbon Particulate Test
SAE R-471-2018 Reducing Particulate Emissions in Gasoline Engines
SAE ARP4285A-2018 Aerospace - Evaluation of Particulate Contamination in Hydraulic Fluid - Membrane Procedure

Society of Automotive Engineers (SAE), Oil Particle Size

SAE J391-1981 Definition for Particle Size
SAE ARP6223-2020 Oil Carbon Particulate Test
SAE ARP598-1991 PROCEDURE FOR THE DETERMINATION OF PARTICULATE CONTAMINATION OF HYDRAULIC FLUIDS BY THE PARTICLE COUNT METHOD
SAE AMS3041-1974 MAGNETIC PARTICLES Wet Method, Oil Vehicle
SAE AMS3041A-1984 MAGNETIC PARTICLES Wet Method, Oil Vehicle
SAE AMS3045A-1977 MAGNETIC PARTICLES, FLUORESCENT Wet Method, Oil Vehicle
SAE AMS3045-1974 MAGNETIC PARTICLES, FLUORESCENT Wet Method, Oil Vehicle
SAE AMS3043-1974 MAGNETIC PARTICLES Wet Method, Oil Vehicle, Aerosol Canned
SAE AMS3045B-1989 MAGNETIC PARTICLES, FLUORESCENT Wet Method, Oil Vehicle, Ready-to-Use
SAE AMS3041B-1988 MAGNETIC PARTICLES, NONFLUORESCENT Wet Method, Oil Vehicle, Ready-to-Use
SAE AMS3043A-1983 MAGNETIC PARTICLES, NONFLUORESCENT Wet Method, Oil Vehicle, Aerosol Packaged
SAE TS64-2-2004 TS64 Standard Method for Microscopic Evaluation of Hydraulic Fluid Samples for Particle Contamination
SAE AMS3045E-2008 Magnetic Particles, Fluorescent, Wet Method, Oil Vehicle Ready-to-Use
SAE ARP4285-2008 Aerospace - Evaluation of Particulate Contamination in Hydraulic Fluid - Membrane Procedure
SAE AMS2553-1963 CLEANING, PACKAGING, AND ASSEMBLY OF CRITICAL SYSTEM COMPONENTS Clean Area Procedure, 2500 Micron Max Particle Size
SAE AMS2552-1963 CLEANING, PACKAGING, AND ASSEMBLY OF CRITICAL SYSTEM COMPONENTS Clean Room Procedure, 500 Micron Max Particle Size
SAE AMS3041E-2008 Magnetic Particles, Nonfluorescent, Wet Method, Oil Vehicle, Ready-to-Use

Taiwan Provincial Standard of the People's Republic of China, Oil Particle Size

CNS 3408-1985 Method of Test for Resistance to Abrasion of Large Size Coarse Aggregate by Use of the Los Angeles machine
CNS 11776-1986 Method of Test for Particle-Size Analysis of Soils
CNS 14316-1999 General rules of the sample preparation for particle size analysis of fine ceramic raw powder
CNS 14313-1999 Method of test for particle size distribution of fine ceramic podwer by liquid photosedimentation method

American Society for Testing and Materials (ASTM), Oil Particle Size

ASTM D2862-97(2004) Standard Test Method for Particle Size Distribution of Granular Activated Carbon
ASTM D2862-97 Standard Test Method for Particle Size Distribution of Granular Activated Carbon
ASTM E1037-15 Standard Test Method for Measuring Particle Size Distribution of RDF-5
ASTM E2651-10 Standard Guide for Powder Particle Size Analysis
ASTM UOP854-85 Size Distribution of Solid Phosphoric Acid Catalyst
ASTM E112-13 Standard Test Methods for Determining Average Grain Size
ASTM D5644-01(2008) Standard Test Methods for Rubber Compounding Materials Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
ASTM D1511-10 Standard Test Method for Carbon Black&8212;Pellet Size Distribution
ASTM D7928-16 Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
ASTM E2834-12(2018) Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Nanoparticle Tracking Analysis (NTA)
ASTM E2834-12(2022) Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Nanoparticle Tracking Analysis (NTA)
ASTM D7634-10 Standard Test Method for Visualizing Particulate Sizes and Morphology of Particles Contained in Hydrogen Fuel by Microscopy
ASTM D5644-01(2013) Standard Test Methods for Rubber Compounding Materialsmdash;Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
ASTM D5644-01 Standard Test Methods for Rubber Compounding Materials8212Determination of Particle Size Distribution of Recylced Vulcanizate Particulate Rubber
ASTM D5644-01(2008)e1 Standard Test Methods for Rubber Compounding Materials Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
ASTM D5158-98 Standard Test Method for Determination of the Particle Size of Powdered Activated Carbon by Air Jet Sieving
ASTM D5158-98(2005) Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air Jet Sieving
ASTM E2834-12 Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Nanoparticle Tracking Analysis (NTA)
ASTM D8090-17 Standard Test Method for Particle Size Distribution and Shape Analysis of Paints and Pigments Using Dynamic Imaging Methods
ASTM D502-89(1995)e1 Standard Test Method for Particle Size of Soaps and Other Detergents
ASTM D502-89(2016) Standard Test Method for Particle Size of Soaps and Other Detergents
ASTM D5817-96 Standard Practice for Carbon Black, Pelleted-Reduction and Blending of Gross Samples
ASTM B930-03 Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
ASTM B930-03(2008) Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
ASTM B930-03(2012) Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
ASTM D6786-15 Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters
ASTM D6786-08 Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters
ASTM D5519-07 Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials
ASTM E2578-07 Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions
ASTM D6786-02 Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters
ASTM D2977-71(1998) Standard Test Method for Particle Size Range of Peat Materials for Horticultural Purposes
ASTM D2977-22 Standard Practice for Particle Size Range of Peat Materials for Horticultural Purposes
ASTM D2977-14 Standard Practice for Particle Size Range of Peat Materials for Horticultural Purposes
ASTM D5519-14 Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials
ASTM D5519-15 Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials
ASTM D5817-03a(2008) Standard Practice for Carbon Black, Pelleted - Reduction, Blending, and Drying of Gross Samples for Testing
ASTM D6786-07 Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters
ASTM E2578-07(2012) Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions
ASTM D6913-04e2 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D6913/D6913M-17 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM E2980-20 Standard Test Methods for Estimating Average Particle Size of Powders Using Air Permeability
ASTM F1394-92(2012) Standard Test Method for Determination of Particle Contribution from Gas Distribution System Valves
ASTM D2067-97 Standard Test Method for Coarse Particles in Printing Ink Dispersions
ASTM D2067-97(2003) Standard Test Method for Coarse Particles in Printing Ink Dispersions
ASTM E2980-14 Standard Test Methods for Estimating Average Particle Size of Powders Using Air Permeability
ASTM D6791-06 Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke
ASTM D6791-02 Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke
ASTM D7684-11 Standard Guide for Microscopic Characterization of Particles from In-Service Lubricants
ASTM D2067-97(2020) Standard Test Method for Coarse Particles in Printing Ink Dispersions
ASTM D2067-97(2008) Standard Test Method for Coarse Particles in Printing Ink Dispersions
ASTM D2067-97(2008)e1 Standard Test Method for Coarse Particles in Printing Ink Dispersions
ASTM D2067-97(2013) Standard Test Method for Coarse Particles in Printing Ink Dispersions
ASTM D7596-23 Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester
ASTM D7596-14 Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester
ASTM C1182-91(2007) Standard Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photosedimentation
ASTM C1182-09 Standard Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photosedimentation
ASTM D7596-10 Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester
ASTM D6877-13 Standard Test Method for Monitoring Diesel Particulate Exhaust in the Workplace
ASTM D6791-22 Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke
ASTM D6877-13(2018) Standard Test Method for Monitoring Diesel Particulate Exhaust in the Workplace
ASTM C1282-94 Standard Test Method for Determining the Particle Size Distribution of Advanced Ceramics by Centrifugal Photosedimentation
ASTM C1282-00 Standard Test Method for Determining the Particle Size Distribution of Advanced Ceramics by Centrifugal Photosedimentation
ASTM C1282-00(2006) Standard Test Method for Determining the Particle Size Distribution of Advanced Ceramics by Centrifugal Photosedimentation
ASTM E2578-07(2018) Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions
ASTM E2578-07(2022) Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions
ASTM C1282-08 Standard Test Method for Determining the Particle Size Distribution of Advanced Ceramics by Centrifugal Photosedimentation
ASTM D4860-08 Standard Test Method for Free Water and Particulate Contamination in Middle Distillate Fuels (Clear and Bright Numerical Rating)
ASTM D6791-11 Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke
ASTM D6791-11(2017)e1 Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke
ASTM E2490-08 Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Photon Correlation Spectroscopy (PCS)
ASTM E2490-09(2021) Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Photon Correlation Spectroscopy (PCS)
ASTM D6175-03(2019) Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles
ASTM D6175-03(2008) Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles
ASTM F50-12(2015) Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles
ASTM B859-03 Standard Practice for De-Agglomeration of Refractory Metal Powders and Their Compounds Prior to Particle Size Analysis
ASTM B859-03(2008)e1 Standard Practice for De-Agglomeration of Refractory Metal Powders and Their Compounds Prior to Particle Size Analysis
ASTM B859-13 Standard Practice for De-Agglomeration of Refractory Metal Powders and Their Compounds Prior to Particle Size Analysis

Association Francaise de Normalisation, Oil Particle Size

NF X11-635:1985 Size analysis-Representation of particle size distributions - Reference models
NF X31-516:2007 Qualité du sol - Fractionnement granulodensimétrique des matières organiques particulaires du sol dans l'eau
XP X43-174*XP CEN/TS 17434:2020 Ambient air - Determination of the particle size spectra of atmospheric aerosol using a Mobility Particle Size Spectrometer (MPSS)
NF X31-107:2003 Qualité du sol - Détermination de la distribution granulométrique des particules du sol - Méthode à la pipette
NF C27-232*NF EN 60970:2007 Insulating liquides - Methods for counting and sizing particles.
XP CEN/TS 17434:2020 Air ambiant - Détermination de la distribution granulométrique de particules d'un aérosol atmosphérique à l'aide d'un spectromètre de granulométrie à mobilité électrique (MPSS)
NF X11-632-2:2001 Representation of results of particle size analysis - Part 2 : calculation of average particle sizes/diameters and moments from particle size distributions.
NF T45-153*NF ISO 8511:2011 Rubber compounding ingredients - Carbon black - Determination of pellet size distribution
NF C27-232:1990 Methods for counting and sizing particles in insulating liquids.
XP CEN ISO/TS 19590:2019 Nanotechnologies - Distribution granulométrique et concentration de nanoparticules inorganiques en milieu aqueux par spectrométrie de masse à plasma induit en mode particule unique
NF P18-622-1:1997 Tests for geometrical properties of aggregates. Part 1 : determination of particle size distribution. Sieving method.
XP U42-792*XP CEN/TS 17760:2022 Inorganic fertilizers - Determination of particle size of ammonium nitrate fertilizers of high nitrogen content
NF X34-111*NF EN ISO 17829:2016 Solid biofuels - Determination of length and diameter of pellets
NF EN ISO 17829:2016 Biocombustibles solides - Détermination de la longueur et du diamètre des granulés
XP CEN/TS 17760:2022 Engrais inorganiques - Détermination de la taille des particules des engrais à base de nitrate d'ammonium et à forte teneur en azote
NF EN 15428:2007 Amendements du sol et supports de culture - Détermination de la répartition granulométrique
NF R19-501-9:2011 Road vehicles - Cleanliness of components of fluid circuits - Part 9 : particle sizing and counting by automatic light extinction particle counter.
NF P98-818-2/IN1:2007 Bituminous mixtures - Test method for hot mix asphalt - Part 2 : particle size distribution.
NF T16-403*NF ISO 19749:2021 Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy
NF T16-404*NF EN ISO 21363:2022 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy
NF T43-022:2020 Styrene-butadiene rubber (carbon black or carbon black and oil masterbatches) - Evaluation procedure
NF B41-204:2002 Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 3 : determination of grain size and size distribution (characterized by the linear intercept method).
NF ISO 11277:2020 Qualité du sol - Détermination de la répartition granulométrique de la matière minérale des sols - Méthode par tamisage et sédimentation
NF EN 15238:2022 Amendements du sol et supports de culture - Détermination de la quantité pour les matériaux de granulométrie supérieure à 60 mm
CEN/TR 17548:2020 Automotive fuels - Diesel fuel market issues - Abrasive particles investigation report
NF T45-156:2015 Rubber compounding ingredients - Carbon black - Determination of aggregate size distribution by disk centrifuge photosedimentometry
NF X43-289*NF EN 14530:2004 Workplaces atmospheres - Determination of diesel particulate matter - General requirements
NF EN 14530:2004 Air des lieux de travail - Dosage des matières particulaires émises par les moteurs diesel - Exigences générales

PL-PKN, Oil Particle Size

PN C04424-1970 Pigmen?? Determination ot particie size ditlribution
PN M47185 ArkusZ3-1972 Painimg aggregats estings
PN M47185 ArkusZ2-1972 Painting aggregats asic parameters
PN C04424-02-1985 Pigments Determination of particie size distribution Microscopic method-simple
PN C04424-04-1985 Pigments Determination of particie size distribution Filtration on filter paper
PN C04424-06-1987 Rgments Determination of particie sizedistribution Grindometric method
PN R66200-1974 Industrial oil plants Flax and hemp grain
PN C04424-05-1985 Pigments Determination of particie size distribution Flow-out single drop of suspension
PN C04061-1965 Pe?roleum produc?s Foreign par?icles in greases determina?ion by microscopical me?hod
PN C04094-1971 Petroleum products De?ermino?ion of foreign par?icles by ?he Budaroys method
PN C04149-1974 Petroleum products Particulate contaminant in aviation turbin? fuels

(U.S.) Ford Automotive Standards, Oil Particle Size

FORD FLTM BO 004-1-2001 PARTICLE SIZE TEST FOR RESINS
FORD U-MB005-8012-1996 GRANULES - OIL ABSORBENT
FORD FLTM EU-BJ 053-1-2000 HYDRAULIC FLUID PARTICLE CONTAMINATION COUNT

Korean Agency for Technology and Standards (KATS), Oil Particle Size

KS A ISO 9276-2-2014(2019) Representation of results of particle size analysis — Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
KS E ISO 2325:2002 Coke－Size analysis(Nominal top size 20 mm or less)
KS E ISO 728:2002 Coke(nominal top size greater than 20 mm)－Size analysis by sieving
KS B 6331-1992(2017) The determination of particulate contamination in hydraulic fluids by the particle count method
KS B 6331-1992(2022) The determination of particulate contamination in hydraulic fluids by the particle count method
KS I 2004-2005 Air quality-Particle size fraction definitions for health-related sampling
KS A 0095-2007 Determination of particle size distribution by the weight of sedimentation in liquid
KS A ISO 9276-2:2003 Representation of results of particle size analysis-Part 2:Calculation of average particle sizes/diameters and moments from particle size distributions
KS A ISO 9276-2:2014 Representation of results of particle size analysis — Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
KS D ISO 4497:2019 Metallic powders — Determination of particle size by dry sieving
KS D 0305-2014(2019) Methods for determining average grain size of magnesium alloy sheets
KS I 2215-2011 Measuring method for particle-size distribution of dusts in flue gas
KS D 2716-2008(2018) Measurement of nanoparticle diameter－Transmission electron microscope
KS M ISO 17829:2021 Solid Biofuels — Determination of length and diameter of pellets
KS I ISO 28439:2013 Workplace atmospheres ― Characterization of ultrafine aerosols/ nanoaerosols ― Determination of the size distribution and number concentration using differential electrical mobility analysing systems
KS A 0508-2003 GENERAL RULES FOR THE DETERMINATION OF PARTICLE SIZE DISTRIBUTION BY SEDIMENTATION IN LIQUID
KS I ISO 7708:2010 Air quality－Particle size fraction definitions for health-related sampling
KS L 6524-2001(2011) TESTING METHOD FOR GRAIN SIZE OF COATED ABRASIVE MICROGRITS(P240-P1200)
KS D 2716-2008 Measurement of nanoparticle diameter－Transmission electron microscope
KS M ISO 8130-13:2008 Coating powders－Part 13：Particle size analysis by laser diffraction
KS E ISO 4701:2009 Iron ores and direct reduced iron－Determination of size distribution by sieving
KS A 0509-2004 DETERMINATION OF PARTICLE SIZE DISTRIBUTION BY THE SEDIMENTATION IN LIQUID USING THE PIPPETTE APPARATUS
KS M ISO 4406_2001-2001(2006) Hydraulic fluid power－fluids－Method for coding the level of contamination by solid particles
KS M ISO 23202-2016(2021) Aluminium oxide used for the production of aluminium－Determination of particles passing a 20 micrometer aperture sieve
KS L ISO 9285-2013(2018) Abrasive grains and crude — Chemical analysis of fused aluminium oxide
KS M ISO 4659-2015(2021) Styrene-butadiene rubber(carbon black or carbon black and oil masterbatches)－Evaluation procedure
KS R ISO 13353:2009 Diesel fuel and petrol filters for internal combustion engines－Initial efficiency by particle counting
KS R ISO 13353:2004 Diesel fuel and petrol filters for internal combustion engines－Initial efficiency by particle counting
KS I ISO 4407:2012 Hydraulic fluid power-Fluid contamination-Determination of particulate contamination by the counting method using an optical microscope
KS R 3049-2002 Automotive parts－Spin-on type filters for gasoline engines(multi-pass method)
KS I ISO 4405:2005 Hydraulic fluid power－Fluid contamination－Determination of particulate contamination by the gravimetric method

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Oil Particle Size

GB/T 15445.2-2006 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distibutions
GB/T 22231-2008 Particle Size Distribution/Fiber Length and Diameter Distribution
GB/T 5758-2001 Determination for particle size range,effective size and uniformity coefficient of ion exchange resins
GB/T 5496-1985 Inspection of grain and oilseeds--Methods for determination of yellow-coloured rice and cracked kernels
GB 5496-1985 Yellow-grained rice and cracked-grain inspection method for grain and oil-seed inspection
GB/T 5758-2023 Determination method of particle size, effective particle size and uniformity coefficient of ion exchange resin
GB 17583-1998 Ammonium nitrate fuel oil explosive
GB/T 42208-2022 Nanotechnologies—Measurement of nanoparticle size in multiphase system—Image method of transmission electron microsopy
GB/T 3780.17-1995 Carbon black--Indirect determination of particle size--Reflectance method
GB/T 5519-1988 Cereals and oilseeds method for determination of the mass of 1000 grains
GB/T 24535-2009 Inspection of grain and oils.Determination for ratio of length to width of paddy
GB/T 3780.17-2008 Carbon black.Part 17: Indirect determination of particle size.Reflectance method
GB/T 12010.6-2010(英文版) Plastic—Poly (vinyl alcohol) (PVAL) materials—Part 6:Determination for particle size
GB/T 5494-2008 Inspection of grain and oils.Determination of foreign matter and unsound kernels of grain and oilseeds
GB/T 21843-2008 Plastics.Vinyl chloride homopolymer and copolymer resins.Particle size determination by mechanical sieving
GB/T 5494-1985 Inspection of grain and oilseeds--Methods for determination of foreign matter and unsound kernels
GB/T 14039-2002 Hydraulic fluid power--Fluids--Method for coding the level of contamination by solid particles
GB/T 42845.1-2023 Microbubble Characterization of Microbubbles Part 1: Offline Evaluation of Particle Size Index
GB/T 19609-2004 Cigarette-Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine

SE-SIS, Oil Particle Size

SIS 11 11 01-1969 Estimating the average grain size of metals
SIS MNC 1113-1967 Extimatinir ihe average grain sizc
SIS MNC 1112-1967 Estimating the average grain size
SIS MNC 1111-1967 Estimating the average grain size
SIS MNC 1114-1967 tJstimating tlie average grain size
SIS SS 02 71 23-1992 Geotechnical tests — Particle size distribution — Sieving
SIS SS 13 21 12-1978 Concrete testing — Aggregate — Particle size distribution
SIS SS 02 71 24-1992 Geotechnical tests — Particle size distribution — Sedimentation, hydrometer method
SIS SS 13 21 23-1983 Concrete testing - Aggregate - Particle size distribution by sieving

RU-GOST R, Oil Particle Size

GOST 2093-1982 Solid fuel. Size analysis
GOST 26573.3-2014 Premixes. Method for determination of particle size
GOST ISO 11286-2014 Tea. Classification by particle size analysis
GOST 33399-2015 Testing of chemicals of environmental hazard. Determination of the particle size distribution/determination of the fibre length and diameter distribution. Method A: Particle size distribution (effective hydrodynamic radius). Method B: Fibre length and dia
GOST ISO 8511-2013 Rubber compounding ingredients. Carbon black. Determination of pellet size distribution
GOST 10854-2015 Oil seeds. Methods for determination of weed, oil-producing and foreign matters
GOST 10854-1964 Oil seeds. Methods of determination of foreign matter, odour, taste and colour
GOST R ISO 4659-2017 Styrene-butadiene rubber (carbon black or carbon black and oil masterbatches). Evaluation procedure
GOST R 8.896-2015 State system for ensuring the uniformity of measurements. Laser analyzers of particle size. Verification procedure
GOST 13979.4-1968 Oilcakes, oilmeals and powdered mustard seed cake. Determination of color, odour, dark impurities and small particles of oilcake
GOST 32727-2014 Automobile roads of general use. Natural and crushed sand. Determination of particle size distribution and size of the module

Japanese Industrial Standards Committee (JISC), Oil Particle Size

JIS R 1639-1:1999 Test methods of properties of fine ceramic granules Part 1: Size distribution of granules
JIS H 7803:2005 General rules for the determination of particle size and crystallite size in metal catalysts
JIS Z 8819-2:2001 Representation of results of particle size analysis -- Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
JIS Z 8826:2005 Particle size analysis -- Photon correlation spectroscopy
JIS Z 8820:1990 General rules for the determination of particle size distribution by sedimentation in liquid
JIS H 7804:2005 Method for particle size determination in metal catalysts by electron microscope
JIS K 7369:2009 Plastics -- Polyvinyl chloride homopolymer and copolymer resins -- Determination of particle size by mechanical sieving
JIS Z 8820-2:2004 Determination of particle size distribution by gravitational liquid sedimentation methods -- Part 2: Fixed pipette method
JIS B 9923:1997 Clean room garment -- Methods for sizing and counting particle contaminants in and on clean room garments

Sichuan Provincial Standard of the People's Republic of China, Oil Particle Size

DB51/T 1349-2011 Rape thresher

Professional Standard - Ocean, Oil Particle Size

HY/T 175-2014 Optical suspended sediment particle size analyzer

Danish Standards Foundation, Oil Particle Size

DS/EN 481:1994 Workplace atmospheres-Size fraction definitions for measurement of airborne particles
DS/ISO 15900:2020 Determination of particle size distribution – Differential electrical mobility analysis for aerosol particles
DS/EN 16127:2012 Solid biofuels - Determination of length and diameter of pellets
DS/ISO 19749:2021 Nanotechnologies – Measurements of particle size and shape distributions by scanning electron microscopy
DS/CEN/TR 17548:2020 Automotive fuels – Diesel fuel market issues – Abrasive particles investigation report
DS/EN 14530:2004 Workplace atmospheres - Determination of diesel particulate matter - General requirements
DS/EN 15238/AC:2009 Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm
DS/EN 15238:2007 Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm
DS/EN 12457-1:2002 Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 1: One stage batch test at a liquid to solid ratio of 2 l/kg for materials with high solid content and with particle size below 4 mm (withou
DS/CEN/TS 15439:2007 Biomass gasification - Tar and particles in product gases - Sampling and analysis

Group Standards of the People's Republic of China, Oil Particle Size

T/CSP 8-2021 Particle technology—Microbubble size analysis —Submerged dynamic image analysis method
T/CAMS CICEIA39-2020 Diesel engine particulate matter sensor
T/HFJX 2048-2020 Diesel Particulate Electric Filter (DPEF)
T/CECS G:K23-01-2019 Technical Specification for Large Stone Base Course Filled with Cement Stabilized Macadam
T/CECS G-K23-01-2019 Technical specification for filled large particle size cement stabilized crushed stone base
T/CICEIA /CAMS3-2020 Diesel engine - Diesel particulate filter (DPF) cleaning device
T/CAS 542-2021 Technical requirements and evaluation methods of air cleaner removing performance for small particles pollutant
T/CICEIA /CAMS24-2021 Diesel engine-Particulate filter-Product quality grading specification
T/GDBX 009-2019 Non-precious metal catalytic diesel engine exhaust particulate filter
T/CAEPI 36.2-2021 Technical Requirements for Pollution Control Devices for Gasoline Vehicles Part 2: Particulate Filters for Gasoline Vehicles
T/CAEPI 12.3-2017 Technical requirements for diesel vehicle exhaust after-treatment devices Part 3: Diesel particulate filter（DPF）

ES-UNE, Oil Particle Size

UNE-CEN/TS 17434:2020 Ambient air - Determination of the particle number size distribution of atmospheric aerosol using a Mobility Particle Size Spectrometer (MPSS) (Endorsed by Asociación Española de Normalización in May of 2020.)
UNE-EN ISO 17829:2016 Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2015)
UNE-CEN/TS 17760:2022 Inorganic fertilizers - Determination of particle size of ammonium nitrate fertilizers of high nitrogen content (Endorsed by Asociación Española de Normalización in May of 2022.)
UNE-EN 14530:2004 Workplace atmospheres - Determination of diesel particulate matter - General requirements
UNE-EN 15238:2023 Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm
UNE-CEN/TR 17548:2020 Automotive fuels - Diesel fuel market issues - Abrasive particles investigation report (Endorsed by Asociación Española de Normalización in January of 2021.)

IN-BIS, Oil Particle Size

Defense Logistics Agency, Oil Particle Size

DLA A-A-1281 A VALID NOTICE 1-2003 SORBENT, OIL (PARTICULATE)
DLA A-A-1281 A-1989 SORBENT, OIL (PARTICULATE)

CZ-CSN, Oil Particle Size

CSN 62 1186-1981 Synthetic rubber latices. Determination of the size of particles by the turbidi- metry method.
CSN 46 1011-11-2003 Testing of cereals, pulses and oilseeds - Part 11: Testing of cereals - Determination of the rate of grains with reduced vitreousness of durum wheat (Triticum durum)
CSN 46 1011 Cast.16-1988 Testing of cereals, legumes and oil-bearing crops. Cereal testing. Determination of large and small grained maize
CSN 65 6220-1984 Oils. Determination of particulate contaminant on membrane filter
CSN 65 6081-1983 Petroleum produrts. Microscopical sizing and couting contaminating partiles
CSN 461011-11-2003 Testing of cereals, pulses and oilseeds - Part 11: Testing of cereals - Determination of the rate of grains with reduced vitreousness of durum wheat (Triticum durum)
CSN 73 6152-1966 Surfacing of pavements made of aggre- gates precoated with asphalto-tar emulsion
CSN 65 6206-1989 Hydraulic fluids and oils. Method for oding level of contamination by so- id particles

RO-ASRO, Oil Particle Size

STAS 9546/7-1973 CHRYSOTYL ASBESTOS Determination of particle size of powdered asbestos

YU-JUS, Oil Particle Size

JUS K.F0.081-1989 Grains of diamond and cubic boroo nitri?e for bonded abrasive products. Grain sizes dlstribution and designat ion

Professional Standard - Construction Industry, Oil Particle Size

JG/T 5089-1997 Determination of solid particulate contaminant in fluids by the automatic particle counting method
JG/T 70-1999 Microscope count method for solid particle filth in oil liquid
JG/T 5066-1996 Determination of solid particulate contaminant in fluids by the gravimetric method

Association of German Mechanical Engineers, Oil Particle Size

VDI 3867 Blatt 2-2008 Measurement of particulate matter in ambient air - Methods for characterizing test aerosols - Determination of the particle number concentration and particle size distribution - Condensation Particle Counter (CPC)
VDI 3867 Blatt 5-2013 Measurement of particles in ambient air - Determination of the particle number concentration and particle size distribution of aerosols - Time-of-flight spectrometer
VDI 3867 Blatt 4-2011 Measurement of particles in ambient air - Determination of the particle number concentration and particle size distribution of aerosols - Optical aerosol spectrometer
VDI 2066 Blatt 5-1994 Particulate matter measurement - Dust measurement in flowing gases; particle size selective measurement by impaction method - Cascade impactor
VDI 3867 Blatt 3-2012 Measurement of particles in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Electrical mobility spectrometer

Professional Standard - Chemical Industry, Oil Particle Size

HG/T 2901-1997 Testing method for particle size of polytetrafluoroethylene resin

AENOR, Oil Particle Size

UNE 103101:1995 PARTICLE SIZE ANALYSIS OF A SOIL BY SCREENING.
UNE 53014:2012 Plastic materials. Determination of particle size and its distribution
UNE-EN 24497:1999 METALLIC POWDERS. DETERMINATION OF PARTICLE SIZE BY DRY SIEVING. (ISO 4497:1983).
UNE 103102:1995 PARTICLE SIZE ANALYSIS OF A FINE SOIL BY SEDIMENTATION. DENSIMETER METHOD.
UNE-EN 15238:2007 Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm
UNE-EN 12457-1:2003 Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 1: One stage batch test at a liquid to solid ratio of 2 l/kg for materials with high solid content and with particle size below 4 mm (withou

国家市场监督管理总局、中国国家标准化管理委员会, Oil Particle Size

GB/T 38949-2020 Determination of pore size for porous membranes—Standard particle method
GB/T 38398-2019 Textiles—Filtration performance—Determination of most penetrating particle size
GB/T 5494-2019 Inspection of grain and oils—Determination of foreign matter and unsound kernels of grain and oilseeds

American National Standards Institute （ANSI), Oil Particle Size

ANSI/ASTM D1921:2001 Particle Size (Sieve Analysis) of Plastic Materials, Standard Test Method for (08.02)

BE-NBN, Oil Particle Size

NBN 382.211-1956
NBN M 02-005-1975 Solid minerai fuels - Size analysis of coke

Professional Standard - Railway, Oil Particle Size

TB/T 2328.15-1992 Test method for particle size distribution of railway gravel and ballast
TB/T 2328.18-1992 Test method for powder content of railway gravel and ballast with particle size below 0.1mm
TB/T 2328.14-2008 Test method for railway ballast
TB/T 2328.17-2008 Test method for railway ballast

KR-KS, Oil Particle Size

KS D ISO 4497-2019 Metallic powders — Determination of particle size by dry sieving
KS M ISO 17829-2021 Solid Biofuels — Determination of length and diameter of pellets
KS D 2716-2023 Measurement of nanoparticle diameter — Transmission electron microscope
KS M ISO 23202-2016 Aluminium oxide used for the production of aluminium－Determination of particles passing a 20 micrometer aperture sieve
KS M ISO 15167-2003(2023)
KS R ISO 13353-2004 Diesel fuel and petrol filters for internal combustion engines－Initial efficiency by particle counting

Professional Standard - Electricity, Oil Particle Size

DL/T 1096-2008 Limited value of particulate pollutant of transformer oils
DL/T 1096-2018 Limited value of particulate pollutant of transformer oils
DL/T 432-2018 Determination method of particle size in electric power oil
DL/T 1978-2019 Classification standard for the degree of pollution of electric power oil particles
DL/T 432-2007 Determination of particulate contamination in oil

Universal Oil Products Company (UOP), Oil Particle Size

UOP 856-2007 PARTICLE SIZE DISTRIBUTION OF POWDERS BY LASER LIGHT SCATTERING

Professional Standard - Hydroelectric Power, Oil Particle Size

SD 313-1989 Method for measuring particle number and size distribution in oil (automatic particle counter method)

工业和信息化部/国家能源局, Oil Particle Size

JB/T 13202.3-2017 Diesel engine particle capture system Part 3: Particle sensor technical conditions
JB/T 13202.4-2017 Diesel engine particle capture system Part 4: Particle trap technical conditions
JB/T 12895-2016 Classification and detection method of pollutant particles in internal combustion engine lubricating oil
JB/T 13202.1-2017 Diesel particulate capture systems Part 1: General technical conditions
JB/T 13202.5-2017 Diesel particulate capture system Part 5: Burner technical conditions

Professional Standard - Commodity Inspection, Oil Particle Size

SN/T 0803.3-1999 Oil bearing materials for import and export.Method for the inspection of kernel measure
SN/T 0803.2-1999 Oil bearing materials for import and export.Method for the inspection of imperfect grains
SN/T 0992-2001 Rules for the inspection of burned petroleum coke and granule for export

Professional Standard - Machinery, Oil Particle Size

JB/T 8432.2-2006 Site mixed and charged ANFO explosive truck
JB/T 8432.2-1996 On-site mixed granular ammonium oil explosives truck
JB/T 12653-2016 Diesel engines.Technical specifications of particle oxidation catalytic converter (POC)
JB/T 53587-1999 On-site mixing of granular ammonium oil explosives vehicle product quality grading
JB/T 8432.2-2018 Field Mixed Explosives Vehicle Part 2: Granular Ammonium Fuel Explosive Type

GB-REG, Oil Particle Size

REG A-A-20351 A-2012 NATURAL BUTTER FLAVOR GRANULES, SPRAY-DRIED

机械工业部, Oil Particle Size

JB 8432.2-1996 On-site mixed granular ammonium fuel oil truck

NATO - North Atlantic Treaty Organization, Oil Particle Size

STANAG 3713-1990 Determination of Particulate Matter in Aerospace Hydraulic Fluids Using a Particle Size Analyser (ED 3 AMD 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +

European Committee for Standardization (CEN), Oil Particle Size

FprCEN/TS 17760-2021 Inorganic fertilizers - Determination of particle size of ammonium nitrate fertilizers of high nitrogen content
prEN 933-1-1992 Tests for geometrical properties of aggregates; part 1: determination of particle size distribution; granulometric analysis (sieving method)
EN 12457-4:2002 Characterisation of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction)
EN ISO 17829:2015 Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2015)
EN 15238:2022 Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm
PD CEN/TR 17548:2020 Automotive fuels - Diesel fuel market issues - Abrasive particles investigation report
prEN 725-5-1992 Advanced technical ceramics; methods of test for ceramic powders; part 5: determination of the particle size distributuion
EN 14530:2004 Workplace atmospheres - Determination of diesel particulate matter - General requirements
prEN ISO 21363:2021 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy (ISO 21363:2020)
prEN 15238-2021 Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm
CEN/TS 15439:2006 Biomass gasification - Tar and particles in product gases - Sampling and analysis
prEN 772-16-1992 Methods of test for masonry units; part 16: determination of size and dimensions (excluding natural stone masonry units)

Lithuanian Standards Office , Oil Particle Size

LST EN 16127-2012 Solid biofuels - Determination of length and diameter of pellets
LST EN 14530-2004 Workplace atmospheres - Determination of diesel particulate matter - General requirements
LST EN 15238-2007 Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm
LST EN 15238-2007/AC-2009 Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm
LST EN 12457-1-2003 Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 1: One stage batch test at a liquid to solid ratio of 2 l/kg for materials with high solid content and with particle size below 4 mm (withou

GOSTR, Oil Particle Size

GOST 34089-2017 Solid biofuel. Determination of length and diameter of pellets

Professional Standard-Ships, Oil Particle Size

CB/T 3997-2008 Determination method of contaminating level by particles for marine fluid

Shaanxi Provincial Standard of the People's Republic of China, Oil Particle Size

DB61/T 1052-2016 Approval standard for machine-harvested rapeseed varieties
DB61/T 1296-2019 Technical specifications for the installation of non-road diesel mobile machinery particulate capture devices

Professional Standard - Agriculture, Oil Particle Size

GB 5519-1988 Determination method of thousand-grain weight of grain and oilseeds
LS/T 6141-2023 Determination of Grain and Oil Inspection Rice Soaking Cracks

VN-TCVN, Oil Particle Size

TCVN 6753-2000 Air quality.Particle size fraction definitions for health-related sampling
TCVN 4777-1989 Ores and concentrates of non-ferrous metals.Method of sieve and sedimentary analysis for determination of particle size
TCVN 3121-1-2003 Mortar for masonry.Test methods Part 1: Determination of maximum particle size of aggregate

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Oil Particle Size

GB/T 3780.17-2017 Carbon black—Part 17: Indirect determination of particle size—Reflectance method
GB/T 34790-2017 Inspenction of grain and oils—Determination of water activity of grains—Instrumental method
GB/T 35881-2018 Inspection of grain and oils—Determination of yellow-colored kernelof paddy—Image analysis method

唐山市市场监督管理局, Oil Particle Size

DB1302/T 537-2021 Technical regulations for sowing single grains of high-oleic peanuts

Henan Provincial Standard of the People's Republic of China, Oil Particle Size

DB41/T 1740-2018 Quality Grading of Peony Peony Seeds for Oil
DB41/T 2105-2021 Technical specifications for construction of large-size asphalt-stabilized macadam drainage base by vibration mixing

Professional Standard - Petrochemical Industry, Oil Particle Size

SH/T 3214-2020 Code for design of petrochemical extrusion granulation frame
SH/T 3152-2021 Design specification for conveying of bulk solids in petrochemical industry
SH/T 3152-2007 Engineering specification for bulk solids pneumatic conveying in petrochemical industry
SH/T 0573-1993 In-use Lubricating Oil Wear Particle Test (Analytical Ferrography)
SH/T 3204-2019 Specifications for design of post-processing (packaging) systems for petrochemical powder products

Professional Standard - Energy, Oil Particle Size

NB/SH/T 6072-2023 Filtration of Particulate Contaminants in Lubricating Oils
NB/SH/T 6017-2020 Test Method for Automatic Particle Counting and Particle Shape Classification of Oil Using a Direct Imaging Synthetic Test Apparatus

Jiangxi Provincial Standard of the People's Republic of China, Oil Particle Size

DB36/T 1836-2023 Technical specifications for industrial solid waste cemented large particle size gravel pavement base

Military Standard of the People's Republic of China-General Armament Department, Oil Particle Size

GJB 380.4-1987 Aircraft hydraulic system contamination test uses automatic particle counter to determine oil solid particle contamination degree

ZA-SANS, Oil Particle Size

SANS 6241:2006 Particle size distribution of material of diameter smaller than 75 ?m in fine aggregate (hydrometer method)

农业农村部, Oil Particle Size

NY/T 1860.32-2016 Test Guidelines for Determination of Physical and Chemical Properties of Pesticides Part 32: Particle Size Distribution

Anhui Provincial Standard of the People's Republic of China, Oil Particle Size

DB34/T 1793-2012 Combustion regenerative particulate filter system for diesel engine

Standard Association of Australia （SAA）, Oil Particle Size

AS 3580.9.7:1990 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM(sub)10(/sub) dichotomous sampler - Gravimetric method

Malaysia Standards, Oil Particle Size

MS 81 Pt.12-2001 Method of sampling and test for spices and condiments:Part 12:Determination of particle size

Professional Standard - Public Safety Standards, Oil Particle Size

GA/T 1419-2017 Oil Immersion Method for Determination of Refractive Index of Glass Particles in Forensic Science

国家林业局, Oil Particle Size

LY/T 2864-2017 Granular activated carbon for fuel evaporative emission control canisters

未注明发布机构, Oil Particle Size

DIN EN ISO 1524:2002 Coating materials and printing inks Determination of grinding fineness (graininess)
BS ISO 23202:2006(2007) Aluminium oxide used for the production of aluminium — Determination of particles passing a 20 micrometre aperture sieve
BS 5540-6:1990(2011) Evaluating particulate contamination of hydraulic fluids — Part 6 : Method of calibrating liquid automatic particle - count instruments (using mono - sized latex spheres)

工业和信息化部, Oil Particle Size

JC/T 2396-2017 Wall flow honeycomb ceramics for diesel particulate traps
JB/T 13471-2018 Non-destructive testing method for online electromagnetic monitoring of metal abrasive particles in oil

Professional Standard - Petroleum, Oil Particle Size

SY/T 0531-1994 Oilfield Injection Water Suspended Particle Measurement Method Resistance Induction Method
SY/T 0531-2012 Determination of particle size of suspended solid in oilfield injecting water.Resistance induction method

国家质量监督检验检疫总局, Oil Particle Size

SN/T 0800.7-2016 Inspection methods for imperfect grains of exported grains, oilseeds and feeds

AT-ON, Oil Particle Size

ONORM L 1061-2-2002 Physical analysis of soils - Determination of particle size distribution in mineral soils - Part 2: Feinboden
ONORM L 1061-1-2002 Physical analysis of soils - Determination of particle size distribution in mineral soils-Part 1: Coarse soil
OENORM EN ISO 21363:2021 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy (ISO 21363:2020)

NL-NEN, Oil Particle Size

NEN 3959-1982 Bitumen and tar products Determination of the partiele charge of emulsified bitumen

Tianjin Provincial Standard of the People's Republic of China, Oil Particle Size

DB12/T 756-2017 Retrofitting Particulate Matter Capture in Diesel Engined Freight Vehicles

PK-PSQCA, Oil Particle Size

PS 282-1963 METHOD OF TEST FOR AMOUNT OF MATERIAL FINER THAN No. 200 BS SIEVE IN AGGREGATES

API - American Petroleum Institute, Oil Particle Size

API PUBL 4365-1983 Characterization of Particulate Emissions from Refinery Process Heaters and Boilers

中国石油化工总公司, Oil Particle Size

SH/T 0470-1992 Determination of solid particle impurities in synthetic aviation lubricants (gravimetric method)

Professional Standard - Automobile, Oil Particle Size

QC/T 1001-2015 Evaluating filtration performance of lubricating oil filters for automobiles.Method of particle counting
QC/T 1007-2015 Evaluating filtration performance of fuel filters for automobiles.Method of particle counting
QC/T 29104-2013 Limiting value of contamination level of solid particles of special purpose vehicle hydraulic system

US-FCR, Oil Particle Size

FCR COE P-1 FINAL REPORT-1992 PARTICLE SIZE DISTRIBUTIONS OF BED SEDIMENTS ALONG THE THALWEG OF THE MISSISSIPPI RIVER, CAIRO, ILLINOIS, TO HEAD OF PASSES

CEN - European Committee for Standardization, Oil Particle Size

PD CEN/TS 15439:2006 Biomass gasification - Tar and particles in product gases - Sampling and analysis