ZH
RU
ES

Principle of curve method

Principle of curve method, Total:499 items.

In the international standard classification, Principle of curve method involves: Mathematics, Power transmission and distribution networks, Electrical wires and cables, Measurement of volume, mass, density, viscosity, Analytical chemistry, Integrated circuits. Microelectronics, Farming and forestry, Ferrous metals, Sports equipment and facilities, Testing of metals, Waxes, bituminous materials and other petroleum products, Edible oils and fats. Oilseeds, Construction materials, Technical product documentation, Applications of information technology, Electrical equipment for working in special conditions, Products of the textile industry, Nuclear energy engineering, Leather technology, Animal feeding stuffs, Cereals, pulses and derived products, Paper and board, Electrical and electronic testing, Extraction and processing of petroleum and natural gas, Electronic components in general, Technical drawings, Glass, Linear and angular measurements, Surface treatment and coating, Semiconductor devices, Rubber and plastics products, Corrosion of metals, Iron and steel products, Road engineering, Equipment for the metallurgical industry, Non-destructive testing, Beverages, Plastics, Non-ferrous metals, Terminology (principles and coordination), Refractories, Medical equipment, Reinforced plastics, Electronic tubes, Construction industry, Vocabularies, Natural gas, Finances. Banking. Monetary systems. Insurance, Semiconducting materials, Rubber, Raw materials for rubber and plastics, Products of the chemical industry, Paint ingredients, Ferroalloys, Character sets and information coding, Machine tools, Components and accessories for telecommunications equipment, Earth-moving machinery, Paints and varnishes, Sensory analysis, Aerospace engines and propulsion systems, Components for aerospace construction, Optics and optical measurements, Veterinary medicine, Electromechanical components for electronic and telecommunications equipment, Metalliferous minerals, Agricultural machines, implements and equipment, Insulating materials, Magnetic materials, General methods of tests and analysis for food products, Road vehicles in general, Textile fibres, Petroleum products in general, Ergonomics, Mechanical testing, Civil engineering in general, Fluid power systems, Equipment for entertainment, Photography, Materials for aerospace construction, Fishing and fish breeding, Springs, Electrical accessories, Crude petroleum, Space systems and operations, Radiation measurements, Paint coating processes, Radiocommunications, Bearings, Fruits. Vegetables, Quality, Structures of buildings, Safety of machinery, Explosion protection, Hydraulic fluids.

Professional Standard - Petroleum, Principle of curve method

SY/T 7549-2000 Determination of viscosity-temperature charts for crude oil with rotational viscometers
SY/T 5906-2003 The method for plotting chart on pressure-loss curve through choke of water injection well
SY/T 5906-2012 The method for plotting chart on pressure-loss curve through water nozzle
SY 5906-2012 Method for making water distribution nozzle nozzle loss curve chart
SY/T 5906-1993 Method for making water distribution nozzle nozzle loss curve chart
SY/T 5317-1988 Automatic sampling method of crude oil pipeline

German Institute for Standardization, Principle of curve method

DIN 13322-1:1988 Electrical networks; concepts related to topology of electrical networks and theory of graphs
DIN 53014-1:1994 Viscosimetry; capillary viscometers with circular and rectangular cross section for determination of flow curves; principles, concepts, definitions
DIN 53019-1:2008 Viscometry - Measurement of viscosities and flow curves by means of rotational viscometers - Part 1: Principles and measuring geometry
DIN 53019-1:2008-09 Viscometry - Measurement of viscosities and flow curves by means of rotational viscometers - Part 1: Principles and measuring geometry
DIN ISO 128-25:2000 Technical drawings - General principles of presentation - Part 25: Lines on shipbuilding drawings (ISO 128-25:1999)
DIN 13320:1979 Acoustics; spectra and frequency curves, concepts, representation
DIN EN ISO 22288:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method (ISO 22288:2006); English version of DIN EN ISO 22288:2009-04
DIN EN 60079-27:2008 Explosive atmospheres - Part 27: Fieldbus intrinsically safe concept (FISCO) (IEC 60079-27:2008); German version EN 60079-27:2008
DIN ISO 128-23:2000 Technical drawings - General principles of presentation - Part 23: Lines on construction drawings (ISO 128-23:1999)
DIN 51418-1:2008 X-ray spectrometry - X-ray emission- and X-ray fluorescence analysis (XRF) - Part 1: Definitions and basic principles
DIN EN ISO 6721-3:2021-05 Plastics - Determination of dynamic mechanical properties - Part 3: Flexural vibration - Resonance-curve method (ISO 6721-3:2021); German version EN ISO 6721-3:2021
DIN 55912-2 Bb.2:1999 Pigments - Titanium dioxide pigments - Methods of analysis; establishing a calibration graph using the X-ray fluorescence analysis
DIN 53014-2:1994 Viscometry; capillary viscometers with circular and rectangular cross section for determination of flow curves; systematic deviations, sources and corrections
DIN 51418-1:1996 X-ray spectrometry - X-ray emission- and X-ray fluorescence analysis (XRF) - Part 1: Definitions and basic principles
DIN EN ISO 32100:2019-02 Rubber- or plastics-coated fabrics - Physical and mechanical tests - Determination of flex resistance by the flexometer method (ISO 32100:2018); German version EN ISO 32100:2018
DIN EN ISO 32100:2019 Rubber- or plastics-coated fabrics - Physical and mechanical tests - Determination of flex resistance by the flexometer method (ISO 32100:2018)
DIN 53533-1:1988 Testing of elastomeres; testing of heat generation and service life during the fatigue test (flexometer test); bases principles
DIN 51006:2005 Thermal analysis (TA) - Thermogravimetry (TG) - Principles
DIN 2271-1:1976 Pneumatic Length Measurement (Air Gauging); Principles, Methods
DIN 51418-1:2008-08 X-ray spectrometry - X-ray emission- and X-ray fluorescence analysis (XRF) - Part 1: Definitions and basic principles
DIN EN 380:1993 Timber structures; test methods; general principles for static load testing; German version EN 380:1993
DIN EN 1127-1:1997 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology; German version EN 1127-1:1997
DIN 53014-1:1994-02 Viscosimetry; capillary viscometers with circular and rectangular cross section for determination of flow curves; principles, concepts, definitions / Note: To be replaced by DIN 53014-1 (2019-03).

PL-PKN, Principle of curve method

PN C04001-1967 Petroleum Determination of curve of the veritabies boilings tempera?ures and of curves of the physicols and chemicals properties
PN-EN ISO 6721-3-2021-08 E Plastics--Determination of dynamic mechanical properties--Part 3: Flexural vibration--Resonance-curve method (ISO 6721-3:2021)
PN P04609-1974 Determination of legal and commercial mass of textile raw materials and yarns

AASHTO - American Association of State Highway and Transportation Officials, Principle of curve method

T 272-2010 Standard Method of Test for Family of Curves—One Point Method
T 272-2015 Standard Method of Test for Family of Curves-One Point Method
T 272-2004 Standard Method of Test for Family of Curves - One-Point Method
T 272-1986 Standard Method of Test for Family of Curves - One-Point Method (HM-22; PART IIB)

RU-GOST R, Principle of curve method

GOST 15634.3-1970 Magnet wire. Method of the bending test
GOST 1579-1993 Wire. Bend test method
GOST 28396-1989 Grain raw material, mixed fodder. Method for determination of patuline
GOST 30435-1996 Paper and board. Determination of bending stiffness by static methods. General principles
GOST 20398.3-1974 Field-effect transistors. Forward transconductance measurement technique
GOST R 56803-2015 Plastics. Determination of dynamic mechanical properties. Part 3. Flexural vibration. Resonance-curve method
GOST 12182.3-1980 Cables, wires and cords. Methods of control of bending resistance with twisting
GOST 30319.0-1996 Natural gas. Methods of calculation of physical properties. General
GOST R 52350.27-2005 Electrical apparatus for explosive gas atmospheres. Part 27. Fieldbus intrinsically safe concept (FISCO) and fieldbus non-incendive concept (FNICO)
GOST 19438.7-1975 Electron low power tubes; Measuring method for steepuess of characteristic
GOST R 52489-2005 Paint materials. Colorimetry. Part 1. Principles
GOST R ISO 14087-2015 Leather. Physical and mechanical tests. Method for determination of bending force
GOST 12182.1-1980 Cables, wires and cords. Methods of multifold bendig resistance trough a roll system
GOST 27278-1987 Electromechanical radio components. Method of testing cable clamp strength to cable bending
GOST R 52828-2007 Wines and winestocks. Determination of ohratoxin A content. Method of thin-layer chromatography
GOST 8846-1987 Knitted fabrics and garments. Methods for determination of linear demensions, distortion number of courses and wales and yarn length in the loop
GOST 23363-2001 Texturized synthetic threads. Method for determination of crimpiness indices
GOST 23363-1990 Texturized synthetic threads. Method for determination of crimpiness indices
GOST R 55234.1-2012 Practical aspects of management of risk. Injury risk curves for evaluation of occupant protection in frontal impact
GOST 20398.9-1980 Field-effect transistors. Forward fransconductance inpulse measurement technique
GOST ISO 5530-2-2014 Wheat flour. Physical characteristics of doughs. Part 2. Determination of rheological properties using an extensograph
GOST 19438.0-1980 Low powered electronic tubes. Method of measurements of parameters. General principles
GOST R ISO 22514-1-2012 Statistical methods. Process management. Part 1. General principles
GOST R ISO 22514-1-2015 Statistical methods. Process management. Part 1. General principles
GOST 33287-2015 Wine and wine materials. Determination of ochratoxin A content by high performance liquid chromatography
GOST R 57917-2017 Polymer composites. Determination of dynamic viscosity of thermosetting resins by the sinusoidal method

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Principle of curve method

GB/T 2951.23-1994 Test method for determining mechanical and physical properties of electric cables and wires. Bending test
GB/T 4909.6-1985 Test methods for bare wires--Bend test--Single bend test
GB/T 4909.5-1985 Test methods for bare wires--Bend test--Reverse bend test
GB/T 23144-2008 Paper and board.Determination of bending stiffness by static methods.General principle
GB/T 2951.21-1994 Test method for determining mechanical and physical properties of electric cables and wires. Flexing test for flexible cables and wires
GB/T 2539-1981 Paraffins--Determination of melting point(cooling curve)
GB/T 4909.5-2009 Test methods for bare wires.Part 5:Bend test.Reverse bend test
GB/T 4909.6-2009 Test methods for bare wires.Part 6:Bend test.Single bend test
GB/T 2539-2023 Determination of melting point of petroleum wax by cooling curve method
GB/T 2539-2008 Petroleum waxes. Determination of melting point. Cooling curve method
GB/T 238-2002 Metallic materials-Wire-Reverse bend test
GB/T 238-2013 Metallic materials.Wire.Reverse bend test
GB/T 30315-2013 Test method for reciprocating flex fatigue of dipped cords
GB/T 14235.1-1993 Surface roughness for plastic parts
GB/T 5058-1985 Steel--Determination of isothermal transformation diagram--Magnetic method
GB/T 9506.5-1988 Test method for nitrogen-released and gas-absorbed dynamic curve of nitrogen-doped getter
GB/T 23976.2-2009 Dyes.Determination of dyeing rate curve.Method for determination of Integ
GB/T 23976.1-2009 Dyes.Determination of dyeing rate curve.Method for determination of dye-uptake
GB/T 3789.19-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of frequency characteristic curve
GB/T 32188-2015 Test method for full width at half maximum of double crystal X-ray rocking curve of GaN single crystal substrate
GB/T 15247-1994 Electron probe quantitative analysis method of carbon in carbon steel and low alloy steel--Sensitivity curve method (detection limit method)
GB/T 42524-2023 Iron ore fines in bulk—Determination of transportable moisture limits—Compaction curve test procedure
GB/T 3789.13-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of static characteristic curve for common grid circuit
GB/T 3789.14-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of static characteristic curve for common cathode circuit
GB/T 11186.1-1989 Methods for measuring the colour of paint films--Part 1:Principles
GB 11186.1-1989 The measurement method of the color of the coating film, the first part of the principle
GB/T 32918.2-2016 Information security technology.Public key cryptographic algorithm SM2 based on elliptic curves.Part 2:Digital signature algorithm
GB/T 32918.4-2016 Information security technology.Public key cryptographic algorithm SM2 based on elliptic curves.Part 4:Public key encryption algorithm
GB/T 32918.1-2016 Information security technology.Public key cryptographic algorithm SM2 based on elliptic curves.Part 1:General
GB/T 12833-1991 Rubber and plastics--Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength

Professional Standard - Agriculture, Principle of curve method

T/CBJ 004-2016 Solid-state method Xiaoqu Fen-flavor liquor
NY/T 3406-2018 Methods for the detection of pathogens of livestock actinomycosis
NY/T 4312-2023 Strong reduction treatment method for soil management of continuous cropping obstacles in protected areas

TIA - Telecommunications Industry Association, Principle of curve method

TIA/EIA-455-44B-1992 FOTP-44 Refractive Index Profile@ Refracted Ray Method
TIA-455-44-B-1992 FOTP-44 Refractive Index Profile@ Refracted Ray Method (Withdrawn May 2003)

Professional Standard - Chemical Industry, Principle of curve method

HG/T 4543-2013 Water treatment chemicals.Determination of corrosion inhibition performance.Potentiodynamic polarization method

Professional Standard - Electron, Principle of curve method

SJ/T 10402-1993 General principles of measuring methods for automatic music selectors of semiconductor audio integrated circuits
SJ/Z 1171-1977 Methods for determination of polarization curve of electroplating solution
SJ/T 10882-1996 Semiconductor integrated circuits - General principles of measuring methods for linear amplifiers
SJ/T 10803-1996 Semiconductor integrated circuits used as interface circuits - General principles of measuring methods for line circuits
SJ 448-1973 Methods of measurement for static characteristic of high-voltage rectifier tubes
SJ/T 31021-1994 Requirements of readiness and methods of inspection and assessment for optical curve grinding machines

Taiwan Provincial Standard of the People's Republic of China, Principle of curve method

CNS 7066-1991 Methods of Test for Aflatoxins in Feeds
CNS 9815-1983 Method of Test for Wires Breakage of Appliance
CNS 7389-1981 Method for analysis of radioisotopes aluminum absorption curve
CNS 11521-1986 Method for Making Anode Polarization Measurement for Stainless Steels
CNS 4798.29-1995 Method of test for toy safety (Flexure test for toys with stiffening means for retention of form)
CNS 10818-1984 Method of Test for Twisted Folyvinylidene Chloride and Polyvinyl Chloride Filament Yarns for Fishing Nets
CNS 4798-29-1995 Method of test for toy safety (Flexure test for toys with stiffening means for retention of form)
CNS 3.16-1994 Engineering Drawing (Geometrical Tolerancing - Principles and Methods of Verification)
CNS 3-16-1994 Engineering Drawing (Geometrical Tolerancing - Principles and Methods of Verification)
CNS 14306-4-1999 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates (Method for the calibration of ISO surface profile comparators and for the determination of surface
CNS 14306.4-1999 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates (Method for the calibration of ISO surface profile comparators and for the determination of surface
CNS 14306.3-1999 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates (Method for the calibration of ISO surface profile comparators and for the determination of surface
CNS 14306-3-1999 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates (Method for the calibration of ISO surface profile comparators and for the determination of surface

工业和信息化部, Principle of curve method

YB/T 4144-2019 Establish and control atomic emission spectroscopy chemical analysis curve rules

The American Road & Transportation Builders Association, Principle of curve method

AASHTO T 272-2010 Standard Method of Test for Family of Curves-One Point Method
AASHTO T 272-2015 Standard Method of Test for Family of Curves-One Point Method
AASHTO T 272-1986 Standard Method of Test for Family of Curves - One-Point Method HM-22; PART IIB R(2000)

American Society for Testing and Materials (ASTM), Principle of curve method

ASTM F1832-97 Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM F1832-07(2017) Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM E561-21 Standard Test Method for KR Curve Determination
ASTM E561-20 Standard Test Method for KR Curve Determination
ASTM E561-19 Standard Test Method for KR Curve Determination
ASTM E561-19e1 Standard Test Method for KR Curve Determination
ASTM E561-22 Standard Test Method for KR Curve Determination
ASTM E561-08e1 Standard Test Method forK-R Curve Determination
ASTM E561-10e1 Standard Test Method for K-R Curve Determination
ASTM E561-05 Standard Test Method for K-R Curve Determination
ASTM E561-05e1 Standard Test Method forK-R Curve Determination
ASTM E561-15a Standard Test Method for KR Curve Determination
ASTM E561-10e2 Standard Test Method for K-R Curve Determination
ASTM D87-04 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D1336-07(2011) Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM E305-07 Standard Practice for Establishing and Controlling Atomic Emission Spectrochemical Analytical Curves
ASTM E305-13 Standard Practice for Establishing and Controlling Atomic Emission Spectrochemical Analytical Curves
ASTM B478-85(1997)e1 Standard Test Method for Cross Curvature of Thermostat Metals
ASTM D87-07 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D87-07a Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM B478-85(2008) Standard Test Method for Cross Curvature of Thermostat Metals
ASTM E2218-23 Standard Test Method for Determining Forming Limit Curves
ASTM E2218-14 Standard Test Method for Determining Forming Limit Curves
ASTM E2218-15 Standard Test Method for Determining Forming Limit Curves
ASTM E2218-02(2008) Standard Test Method for Determining Forming Limit Curves
ASTM E2218-14e1 Standard Test Method for Determining Forming Limit Curves
ASTM E561-10 Standard Test Method forK-R Curve Determination
ASTM D87-09(2014) Standard Test Method for Melting Point of Petroleum Wax 40;Cooling Curve41;
ASTM D6515-00 Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
ASTM D6515-00(2004) Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
ASTM D6515-00(2009) Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
ASTM D87-09 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D87-09(2018) Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D1336-07(2015) Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM E305-21 Standard Practice for Establishing and Controlling Spark Atomic Emission Spectrochemical Analytical Curves
ASTM E2218-02 Standard Test Method for Determining Forming Limit Curves
ASTM D1336-97(2003) Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM D1336-97 Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM D6068-96(2002)e1 Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM D6068-10 Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM D3883-04 Standard Test Method for Yarn Crimp or Yarn Take-up in Woven Fabrics
ASTM E561-23 Standard Test Method for KR Curve Determination
ASTM D6068-10(2018) Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM A773/A773M-01(2009) Standard Test Method for dc Magnetic Properties of Materials Using Ring and Permeameter Procedures with dc Electronic Hysteresigraphs
ASTM F1832-07 Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM D6068-96 Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM E2948-14 Standard Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire
ASTM C1699-09 Standard Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates
ASTM D6200-21 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D6200-01(2017) Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D3883-99 Standard Test Method for Yarn Crimp or Yarn Take-up in Woven Fabrics
ASTM D3883-04(2008) Standard Test Method for Yarn Crimp and Yarn Take-up in Woven Fabrics
ASTM F1832-07(2011) Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM D3883-04(2012) Standard Test Method for Yarn Crimp and Yarn Take-up in Woven Fabrics
ASTM B389-81(1998) Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
ASTM B389-81(2020) Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
ASTM C1699-09(2015) Standard Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates
ASTM D2892-18a Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D2892-16 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D2892-17 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D2892-19 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D2892-20 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D1830-17 Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method
ASTM F2771-10(2016) Standard Test Method for Determining the Luminance Curve of an Electroluminescent Lamp at Ambient Conditions
ASTM E746-02 Standard Test Method for Determining Relative Image Quality Response of Industrial Radiographic Film
ASTM E746-93(1998) Standard Test Method for Determining Relative Image Quality Response of Industrial Radiographic Film
ASTM D6549-01 Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM D6549-00 Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM D6200-01(2007) Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis

SE-SIS, Principle of curve method

SIS SS IEC 113-5:1988 Rules for electrical diagrams — Interconnection diagrams
SIS SS 2132-1990 ISO system of limits and fits-ISO tolerances b8 to b13 for shafts
SIS SS 402 08 21-1988 Rules for electrical diagrams — Wiring documents
SIS SEN 01 27 56-1968 Symbols for electrical diagrams Radio stations
SIS SS IEC 113-6:1988 Rules for electrical diagrams — Unit wiring diagrams
SIS SEN 02 08 21-1972 Rules for electrical diagrams. Wiring documents
SIS SEN 01 27 08-1971 Symbols for electhcal diagrams. Piezo-electric crystals. Magnetostrictive devices. Delay lines

IET - Institution of Engineering and Technology, Principle of curve method

PRINC PLANAR NEAR-FLD ANT MEAS-2007 Principles of Planar Near-Field Antenna Measurements

Professional Standard - Aviation, Principle of curve method

HB 5261-1983 KR curve test method for sheet metal
HB 5488-1991 Method for determination of stress-strain curve of metallic materials

Professional Standard - Password Professional Standards, Principle of curve method

GM/T 0003-2012 SM2 Elliptic Curve Public Key Cryptography Algorithm
GM/T 0003.1-2012 Public key cryptographic algorithm SM2 based on elliptic curves.Part 1:General
GM/T 0003.2-2012 Public key cryptographic algorithm SM2 based on elliptic curves.Part 2:Digital signature algorithm
GM/T 0003.4-2012 Public key cryptographic algorithm SM2 based on elliptic curves.Part 4:Public key encryption algorithm
GM/T 0003.5-2012 Public key cryptographic algorithm SM2 based on elliptic curves.Part 5:Parameter definition
GM/T 0003.3-2012 Public key cryptographic algorithm SM2 based on elliptic curves.Part 3:Key exchange protocol

British Standards Institution (BSI), Principle of curve method

BS 684-1.13:1976 Methods of analysis of fats and fatty oils - Physical methods - Determination of cooling curve
BS EN 82045-1:2001 Document management. Principles and methods
BS 4695:1980 Method for determination of melting point of petroleum wax (cooling curve)
PD ISO/TR 21582:2021 Pyrogenicity. Principles and methods for pyrogen testing of medical devices
BS 684 Sec.1.13:1976 Methods of analysis of fats and fatty oils. Physical methods. Determination of cooling curve
BS 6663:1986 Methods for determination of crimp rigidity of textured nylon yarns
BS EN 13335:2002 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method
BS EN ISO 6721-3:1996 Plastics. Determination of dynamic mechanical properties. Flexural vibration. Resonance-curve method
BS EN ISO 6721-3:2021 Tracked Changes. Plastics. Determination of dynamic mechanical properties. Flexural vibration. Resonance-curve method
BS EN 60079-27:2006 Electrical apparatus for explosive gas atmospheres - Fieldbus intrinsically safe concept (FISCO) and fieldbus non-incendive concept (FNICO)
18/30356322 DC BS ISO 21914. Test methods for fibre-reinforced cementitious composites. Bending moment-curvature curve by four-point bending test
BS PD ISO/TR 21582:2021 Pyrogenicity. Principles and methods for pyrogen testing of medical devices
BS 7424:1991 Guide to general principles for determination of the bending stiffness of paper and board by static methods
BS 903-A49:1984 Physical testing of rubber - Part A49: Determination of temperature rise and resistance to fatigue in flexometer testing (basic principles)
BS EN ISO 13299:2003 Sensory analysis. Methodology. General guidance for establishing a sensory profile
BS EN ISO 13299:2010 Sensory analysis - Methodology - General guidance for establishing a sensory profile
20/30406584 DC BS EN ISO 6721-3. Plastics. Determination of dynamic mechanical properties. Part 3. Flexural vibration. Resonance-curve method
BS ISO 5628:2019 Tracked Changes. Paper and board. Determination of bending stiffness. General principles for two-point, three-point and four-point methods
BS EN 14049:2003(2011) Water application intensity - Calculation principles and measurement methods
BS EN 14049:2003 Water application intensity - Calculation principles and measurement methods
BS ISO 704:2022 Tracked Changes. Terminology work. Principles and methods
BS EN 13068-3:2001 Non-destructive testing - Radioscopic testing - General principles of radioscopic testing of metallic materials by X- and gamma rays
BS EN 13068-3:2001(2008) Non-destructive testing - Radioscopic testing - General principles of radioscopic testing of metallic materials by X- and gamma rays
BS EN ISO 32100:2018 Tracked Changes. Rubber- or plastics-coated fabrics. Physical and mechanical tests. Determination of flex resistance by the flexometer method
BS 3900-E17:1997 Methods of test for paints - Determination of mar resistance using a curved stylus
BS EN ISO 11357-1:2016 Plastics. Differential scanning calorimetry (DSC). General principles
BS EN ISO 11357-1:1997 Plastics - Differential scanning calorimetry (DSC) - General principles
BS EN ISO 11357-1:2009 Plastics - Differential scanning calorimetry (DSC) - General principles
BS DD IEC/PAS 62569-1:2009 Generic specification of information on products - Principles and methods
BS EN ISO 26800:2011 Ergonomics. General approach, principles and concepts
BS EN ISO 22288:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method
BS ISO 7211-3:2002 Textiles - Woven fabrics - Construction - Methods of analysis - Determination of crimp of yarn in fabric
BS ISO 7211-3:1984 Textiles. Woven fabrics. Construction. Methods of analysis. Determination of crimp of yarn in fabric
BS EN 13925-1:2003(2008) Non-destructive testing - X-ray diffraction from polycrystalline and amorphous materials - General principles
BS EN 13925-1:2003 Non-destructive testing - X-ray diffraction from polycrystalline and amorphous materials - General principles
BS EN ISO 11358-1:2014 Plastics. Thermogravimetry (TG) of polymers. General principles
BS EN ISO 11358:1997 Plastics - Thermogravimetry (TG) of polymers - General principles
BS ISO 1132-2:2002 Rolling bearings. Tolerances. Measuring and gauging principles and methods
BS 3518-1:1993 Methods of fatigue testing - Methods of fatigue testing - Guide to general principles
BS ISO 1132-2:2001 Rolling bearings. Tolerances - Measuring and gauging principles and methods
PD ISO/TR 14294:2011 Workplace atmospheres. Measurement of dermal Exposure. Principles and methods

International Organization for Standardization (ISO), Principle of curve method

ISO 21914:2019 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test
ISO 3841:1977 Petroleum waxes; Determination of melting point (cooling curve)
ISO 5402:2002 | IULTCS/IUP 20 Leather — Physical and mechanical tests — Determination of flex resistance by flexometer method
ISO/TR 21582:2021 Pyrogenicity — Principles and methods for pyrogen testing of medical devices
ISO 22288:2006 | IULTCS/IUP 39 Leather — Physical and mechanical tests — Determination of flex resistance by the vamp flex method
ISO 5628:2012 Paper and board - Determination of bending stiffness - General principles for two-point, three-point and four-point methods
ISO 13299:2003 Sensory analysis - Methodology - General guidance for establishing a sensory profile
ISO 13299:2016 Sensory analysis - Methodology - General guidance for establishing a sensory profile
ISO 1027:1983 Radiographic image quality indicators for non-destructive testing; Principles and identification
ISO 5628:2019 Paper and board — Determination of bending stiffness — General principles for two-point, three-point and four-point methods
ISO 5666-2:1983 Water quality; Determination of total mercury by flameless atomic absorption spectrometry; Part 2: Method after pretreatment with ultraviolet radiation
IEC 82045-1:2001 Document management - Part 1: Principles and methods
ISO 26800:2011 Ergonomics - General approach, principles and concepts
ISO 7724-1:1984 Paints and varnishes; Colorimetry; Part 1 : Principles
ISO/IEC 14888-3:2006/Amd 1:2010 Information technology - Security techniques - Digital signatures with appendix - Part 3: Discrete logarithm based mechanisms - Amendment 1: Elliptic Curve Russian Digital Signature Algorithm, Schnorr Digital Signature Algorithm, Elliptic Curve Schnorr Di
ISO/IEC 15946-4:2004 Information technology - Security techniques - Cryptographic techniques based on elliptic curves - Part 4: Digital signatures giving message recovery
ISO 20462-1:2005 Photography - Psychophysical experimental methods for estimating image quality - Part 1: Overview of psychophysical elements
ISO 22288:2006 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method
ISO 6949:1988 Fruits and vegetables; principles and techniques of the controlled atmosphere method of storage
ISO 128-20:1996 Technical drawings - General principles of presentation - Part 20: Basic conventions for lines

RO-ASRO, Principle of curve method

STAS 6901-1978 Psycho-physiological acou stics STANDARD CURVES OF EQUAL LOUDNESS LEVEL AND RELATIONS BETWEEN SOUND PRESSURE LEVELS

Professional Standard - Machinery, Principle of curve method

JB/T 10696.3-2007 Test methods for determining mechanical, physical and chemical properties of electric cables and wires Part 3: Bending test
JB/T 10696.2-2007 Test methods for determining mechanical, physical and chemical properties of electric cables and wires Part 2: Flexing test for flexible cables and wires
JB/T 7704.6-1995 Test method for electroplating solution Determination of polarization curve
JB/T 5893.5-1991 Raw materials of electrotechnical porcelain Test method of physical property
JB/T 5920-2011 Interior curve hydraulic motor.Dimension series for mounting flanges and shaft ends

CZ-CSN, Principle of curve method

CSN 58 8775-1994 Methods of test for fats and oils Determination of cooling curve
CSN 58 8775 Z1-1998
CSN IEC 617-3:1993 Graphical symbols for diagrams. Part 3: Conductors and connecting devices
CSN 72 6031-1982 Refractory materials. Method of test for linear thermal expansion
CSN 72 6040-1985 Refractory materials and produts. Determination of thermal conductivity by hot wire method.

Korean Agency for Technology and Standards (KATS), Principle of curve method

KS K 0545-2001 Testing methods for crimp of yarn in fabrics : Dead load
KS K 0545-1974 Testing methods for crimp of yarn in fabrics : Dead load
KS K 0546-2017 Test method for crimp in yarns from fabrics：Load-elongation method
KS M ISO 5628:2017 Paper and board－Determination of bending stiffness－General principles for two-point, three-point and four-point methods
KS M 2740-1-2005 Petroleum waxes－Determination of melting point(cooling curve)
KS K 0546-2022 Test method for crimp in yarns from fabrics: Load-elongation method
KS B ISO 13565-2-2014(2019) Geometrical Product Specifications(GPS) — Surface texture: Profile method; Surfaces having stratified functional properties — Part 2: Height characterization using the linear material ratio curve
KS K 0545-2003 Testing methods for crimp of yarn in fabrics : Dead load
KS M ISO 22288-2008(2013) Leather－Physical and mechanical tests－Determination of flex resistance by the vamp flex method
KS M ISO 6721-3:2016 Plastics－Determination of dynamic mechanical properties－Part 3：Flexural vibration－Resonance-curve method
KS M ISO 6721-3-2016(2021) Plastics－Determination of dynamic mechanical properties－Part 3：Flexural vibration－Resonance-curve method
KS X ISO 704-2010(2020) Terminology work－Principles and methods
KS B ISO 13565-3-2014(2019) Geometrical Product Specifications(GPS) — Surface texture: Profile method; Surfaces having stratified functional properties — Part 3: Height characterization using the material probability curve
KS B ISO 9247-2015(2020) Earth-moving machinery — Electrical wires and cables — Principles of identification and marking
KS M ISO 4666-1:2010 Rubber, vulcanized-Determination of temperature rise and resistance to fatigue in flexometer testing-Part 1:Basic principle
KS M ISO 4666-1-2015(2021) Rubber, vulcanized－Determination of temperature rise and resistance to fatigue in flexometer testing－Part 1：Basic principle
KS Q ISO 13299:2007 Sensory analysis－Methodology－General guidance for establishing a sensory profile
KS M 9102-1996(2001) WATER QUALITY-DETERMINATION OF TOTAL MERCURY BY FLAMELESS ATOMIC ABSORPTION SPECTROMETRY(METHOD AFTER PRETREATMENT WITH ULTRAVIOLET RADITION)
KS M ISO 4666-1:2015 Rubber, vulcanized－Determination of temperature rise and resistance to fatigue in flexometer testing－Part 1：Basic principle
KS F ISO 128-23:2003 Technical drawings－General principles of presentation－Part 23 : Lines on construction drawings
KS B ISO 1027:2007 Radiographic image quality indicators for non－destructive testing－Principles and identification
KS A IEC 82045-1:2008 Document management-Part 1:Principles and methods
KS A IEC 82045-1:2014 Document management — Part 1: Principles and methods
KS A IEC 82045-1:2019 Document management — Part 1: Principles and methods
KS F 2373-2010 Standard test method for measuring pavement roughness using a 7.6 m profilograph
KS A 4054-2005(2010) Radiographic image quality indicators for non-destructive testing－Principles and identification
KS B ISO 1027-2007(2012) Radiographic image quality indicators for non－destructive testing－Principles and identification
KS M ISO 7724-1:2007 Paints and varnishes－Colorimetry－Part 1：Principles
KS K 0105-2017 General principles of physical testing methods for textiles
KS M ISO 7724-1-2007(2022) Paints and varnishes－Colorimetry－Part 1：Principles
KS K 0105-2022 General principles of physical testing methods for textiles
KS M ISO 7724-1-2007(2017) Paints and varnishes－Colorimetry－Part 1：Principles
KS K ISO 6939:2007 Textiles-Yarns from packages-Method of test for breaking strength of yarn by the skein method
KS A 4054-2013 Radiographic image quality indicators for non-destructive testing－Principles and identification
KS A 4502-1980(1995) METHOD OF HANDLING X-RAY FILM BADGES
KS A ISO 20462-1:2007 Photography－Psychophysical experimental methods for estimating image quality－Part 1：Overview of psychophysical elements
KS M ISO 22288:2008 Leather-Physical and mechanical tests-Determination of flex resistance by the vamp flex method
KS M ISO 11358:2006 Plastics－Thermogravimetry(TG) of polymers－General principles
KS C IEC/PAS 62569-1:2016 Generic specification of information on products ― Part 1: Principles and methods

American Welding Society (AWS), Principle of curve method

WRC 458:2001 Fracture Toughness Master Curve Development: Application Of Master Curve Fracture Toughness Methodology For Ferritic Steels
WRC 474:2002 Master S-N Curve Method for Fatigue Evaluation of Welded Components

Japanese Industrial Standards Committee (JISC), Principle of curve method

JIS K 6557-8:2017 Leather -- Physical and mechanical tests -- Determination of flex resistance -- Flexometer method
JIS G 0579:2007 Method of anodic polarization curves measurement for stainless steels
JIS K 7244-3:1999 Plastics -- Determination of dynamic mechanical properties -- Part 3: Flexural vibration -- Resonance-curve method
JIS H 7201:1991 Method of determining the PCT relations of hydrogen -- absorbing alloys
JIS G 0579 AMD 1:2012 Method of anodic polarization curves measurement for stainless steels (Amendment 1)
JIS Z 8245-1:2006 Document management -- Part 1: Principles and methods

KR-KS, Principle of curve method

KS M ISO 5402-2008 Leather－Physical and mechanical tests－Determination of flex resistance by flexometer method
KS M ISO 5628-2017 Paper and board－Determination of bending stiffness－General principles for two-point, three-point and four-point methods
KS M ISO 6721-3-2016 Plastics－Determination of dynamic mechanical properties－Part 3：Flexural vibration－Resonance-curve method
KS A IEC 82045-1-2019 Document management — Part 1: Principles and methods
KS C IEC/PAS 62569-1-2016 Generic specification of information on products ― Part 1: Principles and methods

Aeronautical Radio Inc., Principle of curve method

ARINC 640 ITEM 3.0-1997 Approach and Rationale

CL-INN, Principle of curve method

INDITECNOR 35-9d-1961

IETF - Internet Engineering Task Force, Principle of curve method

RFC 6605-2012 Elliptic Curve Digital Signature Algorithm (DSA) for DNSSEC
RFC 5656-2009 Elliptic Curve Algorithm Integration in the Secure Shell Transport Layer
RFC 8080-2017 Edwards-Curve Digital Security Algorithm (EdDSA) for DNSSEC
RFC 5753-2010 Use of Elliptic Curve Cryptography (ECC) Algorithms in Cryptographic Message Syntax (CMS) (Obsoletes: 3278)
RFC 6161-2011 Elliptic Curve Algorithms for Cryptographic Message Syntax (CMS) Encrypted Key Package Content Type
RFC 6162-2011 Elliptic Curve Algorithms for Cryptographic Message Syntax (CMS) Asymmetric Key Package Content Type
RFC 4754-2007 IKE and IKEv2 Authentication Using the Elliptic Curve Digital Signature Algorithm (ECDSA)
RFC 8419-2018 Use of Edwards-Curve Digital Signature Algorithm (EdDSA) Signatures in the Cryptographic Message Syntax (CMS)
RFC 8418-2018 Use of the Elliptic Curve Diffie-Hellman Key Agreement Algorithm with X25519 and X448 in the Cryptographic Message Syntax (CMS)

Professional Standard - Coal, Principle of curve method

MT/T 581-1996 Test method of inner curve hydraulic motor for mining

Danish Standards Foundation, Principle of curve method

DS/EN ISO 22288:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method
DS/ISO/TR 21582:2021 Pyrogenicity – Principles and methods for pyrogen testing of medical devices
DS/EN ISO 6721-3:1996 Plastics - Determination of dynamic mechanical properties - Part 3: Flexural vibration - Resonance-curve method
DS/ISO 6721-3:2021 Plastics – Determination of dynamic mechanical properties – Part 3: Flexural vibration – Resonance-curve method
DS/EN ISO 32100:2011 Rubber- or plastics-coated fabrics - Physical and mechanical tests - Determination of flex resistance by the flexometer method
DS/EN 82045-1:2002 Document management - Part 1: Principles and methods
DS/EN 14049:2004 Water application intensity - Calculation principles and measurement methods
DS/EN ISO 13565-2/Corr. 1:2007 Geometrical product specifications (GPS) - Surface texture: Profile method; surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio curve
DS/EN ISO 13565-2:1998 Geometrical product specifications (GPS) - Surface texture: Profile method; surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio curve
DS/ISO 7724/1:1986 Paints and varnishes. Colorimetry. Part 1: Principles
DS/ISO 1027:1987 Radiographic image quality indicators for non-destructive testing. Principles and identification

Association Francaise de Normalisation, Principle of curve method

NF P78-341*NF EN 1288-1:2000 Glass in building - Determination of the bending strength of glass - Part 1 : fundamentals of testing glass.
FD S99-513*FD ISO/TR 21582:2021 Pyrogenicity - Principles and methods for pyrogen testing of medical devices
NF C23-579-27*NF EN 60079-27:2008 Explosive atmospheres - Part 27 : fieldbus intrinsically safe concept (FISCO)
FD ISO/TR 21582:2021 Pyrogénicité - Principes et méthodes d'essai pour la recherche des pyrogènes sur les dispositifs médicaux
NF T51-117-3:2021 Plastics - Determination of dynamic mechanical properties - Part 3 : flexural vibration - Resonance-curve method
NF ISO 704:2022 Travail terminologique - Principes et méthodes
NF T51-120-1:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - - Partie 1 : principes généraux.
NF Q03-127:2012 Paper and board - Determination of bending stiffness - General principles for two-point, three-point and four-point methods.
NF C23-579-27:2006 Electrical apparatus for explosive gas atmospheres - Part 27 : fieldbus intrinsically safe concept (FISCO) and Fieldbus non-incendive concept (FNICO).
NF ISO 9247:2005 Engins de terrassement - Fils et câbles électriques - Principes d'identification et de marquage
NF G37-138*NF EN ISO 32100:2018 Rubber- or plastics-coated fabrics - Physical and mechanical tests - Determination of flex resistance by the flexometer method
NF V09-007:2010 Sensory analysis - Methodology - General guidance for establishing a sensory profile.
NF EN 14049:2004 Intensité d'apport d'eau - Principes de calcul et méthodes de mesure
NF T75-122:1982 ESSENTIAL OILS. OILS OF CITRUS. DETERMINATION OF CD VALUE BY ULTRAVIOLET SPECTROPHOTOMETRIC ANALYSIS.
NF C03-265*NF EN 82045-1:2002 Document management - Part 1 : principles and methods
NF U51-470*NF EN 14049:2004 Water application intensity - Calculation principles and measurement methods
NF EN 82045-1:2002 Gestion de documents - Partie 1 : principes et méthodes
NF C68-112/A11*NF EN 61386-22/A11:2011 Conduit systems for cable management - Part 22 : particular requirements - Pliable conduit systems
NF EN IEC 61386-22/A11:2021 Systèmes de conduits pour la gestion du câblage - Partie 22 : exigences particulières - Systèmes de conduits cintrables
NF EN IEC 61386-22:2021 Systèmes de conduits pour la gestion du câblage - Partie 22 : exigences particulières - Systèmes de conduits cintrables
NF G52-030:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method.
NF G32-314:1982 Essais des fournitures destinées à l'habillement - Méthode de détermination du gondolage des rubans élastiques après traitement d'entretien

CH-SNV, Principle of curve method

VSM 18670.11-1964
VSM 15358.2-1955
VSM 13305-1968
VSM 13129-1972
SN EN ISO 6721-3:2021 Plastics - Determination of dynamic mechanical properties - Part 3: Flexural vibration - Resonance-curve method (ISO 6721-3:2021)
SNV 24547

未注明发布机构, Principle of curve method

BS 684-1.13:1976(2011) Methods of analysis of Fats and fatty oils — Part 1 : Physical methods — Section 1.13 : Determination of cooling curve
DIN EN ISO 6721-3:2021 Plastics – Determination of dynamic mechanical properties – Part 3: Bending vibration – Resonance curve method (ISO 6721-3:2021)
DIN 50942:1996 Phosphating of metals – process principles, test methods
BS EN ISO 13565-2:1998(1999) Geometric Product Specifications (GPS) — Surface texture : Profile method — Surfaces having stratified functional properties — Part 2 : Height characterization using linear material ratio curve

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Principle of curve method

GB/T 33100-2016 Test methods of belt flexing fatigue for dipped cords
GB/T 33208-2016 Non-destructive testing—Practice for the blades on-line monitoring based on tip-timing theory
GB/T 34612-2017 Measurement method for X-ray double crystal diffraction rocking curve of sapphire crystals
GB/T 35814-2018 Method for analysis of forestry biomass—Preparation of samples

IN-BIS, Principle of curve method

Professional Standard - Military and Civilian Products, Principle of curve method

WJ 1866-1989 Measuring method of pressure-density curve for explosives

Shaanxi Provincial Standard of the People's Republic of China, Principle of curve method

DB61/T 1084-2017 Concrete strength measurement curve by ultrasonic rebound comprehensive method

European Committee for Standardization (CEN), Principle of curve method

EN 13335:2002 Leather - Physical and Mechanical Tests - Determination of Flex Resistance by the Vamp Flex Method
EN ISO 22288:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method [Superseded: CEN EN 13335]
EN ISO 13299:2016 Sensory analysis - Methodology - General guidance for establishing a sensory profile (ISO 13299:2016)
EN ISO 13299:2010 Sensory analysis - Methodology - General guidance for establishing a sensory profile
prEN 25666-2-1992 Water quality; determination of total mercury by flameless atomic absorption spectrometry; part 2: method after pretreatment with ultraviolet radiation (ISO 5666-2:1983)

Group Standards of the People's Republic of China, Principle of curve method

T/CBJ 2204-2023 Quantification of cyanide in Baijiu-making raw materials, Jiuqu and fermented grains
T/CECS 10292-2023 Determination of Water Retention Curve of Porous Building Materials by Semipermeable Membrane Method
T/IAWBS 017-2022 Test method for full width at half maximum of double crystal X-rayrocking curve of diamond single crystal substrate
T/IAWBS 015-2021 Test method for full width at half maximum of double crystal X-ray rocking curve of Ga2O3 single crystal substrate
T/IAWBS 016-2022 X-ray double crystal rocking curve FWHM test method for silicon carbide single wafer
T/CASAS 014-2021 Measuring method for basal plane bending of SiC substrate — High resolution X-ray diffractometry

International Electrotechnical Commission (IEC), Principle of curve method

IEC 60079-27:2008 Explosive atmospheres - Part 27: Fieldbus intrinsically safe concept (FISCO)
IEC 60079-27:2005 Electrical apparatus for explosive gas atmospheres - Part 27: Fieldbus intrinsically safe concept (FISCO) and Fieldbus non-incendive concept (FNICO)
IEC PAS 62569-1:2009 Generic specification of information on products - Part 1: Principles and methods

European Committee for Electrotechnical Standardization（CENELEC）, Principle of curve method

EN 60079-27:2008 Explosive atmospheres - Part 27: Fieldbus intrinsically safe concept (FISCO) (Remains Current)

CENELEC - European Committee for Electrotechnical Standardization, Principle of curve method

EN 60079-27:2004 Electrical apparatus for explosive gas atmospheres Part 27: Fieldbus intrinsically safe concept (FISCO) and Fieldbus non-incendive concept (FNICO)

IT-UNI, Principle of curve method

UNI EN ISO 6721-3:2021 Plastics - Determination of dynamic mechanical properties - Part 3: Flexural vibration - Resonance-curve method

ES-UNE, Principle of curve method

UNE-EN ISO 6721-3:2021 Plastics - Determination of dynamic mechanical properties - Part 3: Flexural vibration - Resonance-curve method (ISO 6721-3:2021)
UNE 41250-4:2016 Test methods for measurement of pavement deflection. Part 4: Curviameter
UNE-EN ISO 32100:2019 Rubber- or plastics-coated fabrics - Physical and mechanical tests - Determination of flex resistance by the flexometer method (ISO 32100:2018)

YU-JUS, Principle of curve method

JUS U.M1.042-1987 Determination of ultrasonic pulse velocity and calibration curve

能源部, Principle of curve method

SY 5407-1991 Determination of capillary pressure curve semi-permeable partition method

ZA-SANS, Principle of curve method

SANS 704:2004 Terminology work - Principles and methods
SANS 60079-27:2006 Electrical apparatus for explosive gas atmospheres Part 27: Fieldbus intrinsically safe concept (FISCO) and Fieldbus non-incendive concept (FNICO)
SANS 3001-GR12:2008 Civil engineering test methods Part GR12: Determination of the flow curve liquid limit

Standard Association of Australia （SAA）, Principle of curve method

AS 1774.31.1:2000 Refractories and refractory materials - Physical test methods - Modulus of elasticity - Flexural method
AS ISO 9247:2021 Earth-moving machinery — Electrical wires and cables — Principles of identification and marking
AS 1774.31.1:2000(R2013)
AS 2001.2.26:1990 Methods of test for textiles - Physical tests - Determination of abrasion resistance of textile fabrics (flexing and abrasion method)

Professional Standard - Hygiene , Principle of curve method

WS/T 75-1996 Guide for reasonable application of medical X-ray diagnosis

American Society of Mechanical Engineers (ASME), Principle of curve method

ASME SEC III D1 NMA APP NF-C-2001 Appendix NF-C Design Basis for Linear-Type Supports

ESDU - Engineering Sciences Data Unit, Principle of curve method

ESDU 80035-1980 Buckling of outstanding flanges. Direct stresses varying linearly or parabolically.
ESDU 89008 C-1990 Normal-force-curve and pitching-moment-curve slopes of forebody-cylinder combinations at zero angle of attack for Mach numbers up to 5.
ESDU 87039 A-1988 PARAMETER ESTIMATION OF LINEAR SYSTEMS IN THE ABSENCE OF PROCESS NOISE: (i) methods based on the least-squares principle
ESDU 87039 B-2004 Parameter estimation of linear systems in the absence of process noise: (i) methods based on the least-squares principle.

Lithuanian Standards Office , Principle of curve method

LST EN ISO 22288:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method (ISO 22288:2006)
LST EN ISO 6721-3:2021 Plastics - Determination of dynamic mechanical properties - Part 3: Flexural vibration - Resonance-curve method (ISO 6721-3:2021)
LST EN 82045-1-2003 Document management. Part 1: Principles and methods (IEC 82045-1:2001)
LST EN 14049-2004 Water application intensity - Calculation principles and measurement methods
LST EN ISO 32100:2011 Rubber- or plastics-coated fabrics - Physical and mechanical tests - Determination of flex resistance by the flexometer method (ISO 32100:2010)
LST EN ISO 6721-3:2002 Plastics - Determination of dynamic mechanical properties - Part 3: Flexural vibration - Resonance-curve method (ISO 6721-3:1994, including Technical Corrigendum 1: 1995)
LST EN ISO 13565-2:2001 Geometrical product specifications (GPS) - Surface texture: Profile method; surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio curve (ISO 13565-2:1996)

BE-NBN, Principle of curve method

NBN S 21-107-1988 Components ol automatic fire detection Systems Part 7 : Point type smoke detectors - Detectors using scattered light, transmitted light or ionization
NBN X 07-001-1984 Graphie symbols - General principles for presentation

Military Standard of the People's Republic of China-General Armament Department, Principle of curve method

GJB 772.112-1993 Explosives Test Method Compressive Stress-Strain Curve Determination
GJB 772.111-1993 Explosives Test Method Tensile Stress-Strain Curve Determination
GJB 17.21-1984 Test methods for aviation wires and cables Low temperature bending test
GJB 736.16-1994 Pyrotechnics Test Method Ignition Pressure-Time Curve Determination
GJB 5309.24-2004 Test methods for pyrotechnics Part 24: Determination of ignition pressure-time curve
GJB 736.16A-2019 Test methods for pyrotechnics Part 16: Determination of ignition pressure-time curve

Professional Standard - Ferrous Metallurgy, Principle of curve method

YB/T 5128-1993 Method for measuring the continuous cooling transformation curve of steel (expansion method)
YB/T 5128-2018 Dilatation method for determination of continuous cooling transition curves of steel

AENOR, Principle of curve method

UNE 77413:2011 Ecotoxicology. Physico-chemical properties. Characterization of chemical substances by the determination of the vapour pressure curve.
UNE-EN 1288-1:2000 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass.
UNE-EN 82045-1:2003 Document management -- Part 1: Principles and methods
UNE-EN 14049:2005 Water application intensity - Calculation principles and measurement methods
UNE-EN ISO 32100:2011 Rubber- or plastics-coated fabrics - Physical and mechanical tests - Determination of flex resistance by the flexometer method (ISO 32100:2010)
UNE 48254:1994 PAINTS AND VARNISHES. TEST METHOD FOR DETERMINATION OF IMPARED REFLECTANCE CURVE OF PAINTS.
UNE-EN ISO 6721-3:1996 PLASTICS. DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES. PART 3: FLEXURAL VIBRATION. RESONANCE-CURVE METHOD (ISO 6721-3:1994, INCLUDING TECHNICAL CORRIGENDUM 1:1995).
UNE-EN ISO 13565-2:1998 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 2: HEIGHT CHARACTERIZATION USING THE LINEAR MATERIAL RATIO CURVE (ISO 13565-2:1996).

American National Standards Institute （ANSI), Principle of curve method

ANSI X9.63-2001 Key Agreement and Key Management Using Elliptic Curve-Based Cryptography
ANSI/SCTE 39-2013 Test Method for Static Minimum Bending Radius for Coaxial Trunk, Feeder, and Distribution Cables
ANSI/ASTM F1832:2007 Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ANSI X9.62-1998 Public Key Cryptography for the Financial Services Industry : The Elliptic Curve Digital Signature Algorithm (ECDSA)

WRC - Welding Research Council, Principle of curve method

BULLETIN 474-2002 MASTER S-N CURVE METHOD FOR FATIGUE EVALUATION OF WELDED COMPONENTS

VE-FONDONORMA, Principle of curve method

PH-BPS, Principle of curve method

PNS ISO 9247:2021 Earth-moving machinery - Electrical wires and cables - Principles of identification and marking

SG-SPRING SG, Principle of curve method

SS EN 1990-2008 Eurocode - Basis of structural design

Society of Automotive Engineers (SAE), Principle of curve method

SAE ARP381-1949(R1991) Hub,Flanged-Spline type wood propeller-No. 10,No. 20
SAE ARP381A-1949 Hub, Flanged - Spline Type Wood Propeller No. 10, No. 20
SAE AMS5857A-2000 Steel, Corrosion Resistant, Bars and Wire 19Cr 10Ni (SAE 30304) High Yield Strength Solution Heat Treated and Cold Worked
SAE AIR5712A-2012 Common Launch Acceptability Region Approach (CLARA)Rationale Document

Defense Logistics Agency, Principle of curve method

DLA A-A-50213 A VALID NOTICE 2-2006 CURVES, DRAFTING, REGULAR AND IRREGULAR: CURVE SETS, DRAFTING, REGULAR AND IRREGULAR; FRENCH, MECHANICAL ENGINEERS, RAILROAD, AND SHIPS
DLA A-A-50213 A VALID NOTICE 1-2001 CURVES, DRAFTING, REGULAR AND IRREGULAR: CURVE SETS, DRAFTING, REGULAR AND IRREGULAR; FRENCH, MECHANICAL ENGINEERS, RAILROAD, AND SHIPS
DLA A-A-50213 A-1988 CURVES, DRAFTING, REGULAR AND IRREGULAR: CURVE SETS, DRAFTING, REGULAR AND IRREGULAR; FRENCH, MECHANICAL ENGINEERS, RAILROAD, AND SHIPS

AT-ON, Principle of curve method

ONORM ISO 5666 Teil.2:1984 Water quality; determination of total mercury by flameless atomic absorption spectrometry; method after pretreatment with ultraviolett radiation

Professional Standard - Business, Principle of curve method

SB/T 10464-2008 Methods for the examination of pathogens of actinomycosis in livestocks

GM North America, Principle of curve method

GM GM4482P-1988 Bend Test for Heat Treated Parts Made from Flat Rolled or Wire Steel Products

Indonesia Standards, Principle of curve method

SNI 05-1362-1989 Surface grinding machines with horizontal spindle, Geometric test methods
SNI 18-6935-2002 Radiographic image quality indicators for non-destructive testing - Principles and identification

机械电子工业部, Principle of curve method

JB 5893.5-1991 Test methods for physical properties of raw materials for electrical porcelain

国家文物局, Principle of curve method

WW/T 0065-2015 Surface capillary absorption curve method for determination of water absorption properties of masonry cultural relics

海关总署, Principle of curve method

SN/T 5228.7-2019 MALDI-TOF MS method for rapid screening of pathogenic microorganisms in exported foods Part 7: Campylobacter jejuni

CU-NC, Principle of curve method

NC 09-04-16-1985 Unified Elements System of Molds, Dies. Stampers and Machining Devices. Machining Device. Lockscrew with Spherical End or for Oscillating Element Main Dimensions and Design Specifications
NC 34-64-1988 Agricultural Machines and Implements. Roots Harvester Methodology for Test Realization

Professional Standard - Textile, Principle of curve method

FZ/T 50009.1-1998 Testing method for linear density of three-dimensional crimp polyester staple fibres.Measure at length of single fibres

国家市场监督管理总局、中国国家标准化管理委员会, Principle of curve method

GB/T 36495-2018 Test method for physical properties of raw material of sintered brick and tile
GB/T 39368-2020 Leather—Physical and mechanical tests—Determination of flex resistance：Vamp flex method

Sichuan Provincial Standard of the People's Republic of China, Principle of curve method

DB51/T 2149.3-2016 Test methods for raw bamboo fibers - Part 3: Test methods for linear density
DB51/T 1402-2011 Geographical indication products Chinese Baijiu Golden Triangle (Sichuan Liquor) Solid-state method Xiaoqu Baijiu

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Principle of curve method

336-2-1970 Principles of the Devices Used to Achieve Privacy in Radiotelephone Conversations - Section 3B - Radiotelephony
ITU-R SM.1132-1995 General Principles and Methods for Sharing between Radio Services

VN-TCVN, Principle of curve method

TCVN 5093-1990 Textiles.Woven fabrics construction.Methods of analysis determination of crimp of yarn in fabrics

Guangdong Provincial Standard of the People's Republic of China, Principle of curve method

DB44/T 840.2-2010 Determination of Corrosion Inhibition Rate of Industrial Boiler Corrosion Inhibitor Part 1: Polarization Curve Method

SAE - SAE International, Principle of curve method

SAE R-361-2005 Automotive Software Engineering Principles@ Processes@ Methods@ and Tools

Professional Standard - Aerospace, Principle of curve method

QJ 1965-1990 Principles and Processing Methods of Wind Tunnel Test Data Acquisition

United States Navy, Principle of curve method

NAVY MS33741 NOTICE 2-1996 WIRING DIAGRAM - SENSITIVE INSTRUMENT SYSTEM WITH SEPARATE AMPLIFIER, 26 VOLTS, 400 CYCLES, SCHEMATIC
NAVY MS33741 VALID NOTICE 1-1991 WIRING DIAGRAM - SENSITIVE INSTRUMENT SYSTEM WITH SEPARATE AMPLIFIER, 26 VOLTS, 400 CYCLES, SCHEMATIC
NAVY MS33741-1960 WIRING DIAGRAM - SENSITIVE INSTRUMENT SYSTEM WITH SEPARATE AMPLIFIER, 26 VOLTS, 400 CYCLES, SCHEMATIC

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Principle of curve method

GJB 5891.3-2006 Test method of loading material for initiating explosive device Part 3: Measurement of loading pressure-density curve

ANSI - American National Standards Institute, Principle of curve method

X9.62-1998 Public Key Cryptography for the Financial Services Industry: the Elliptic Curve Digital Signature Algorithm (ECDSA)

International Telecommunication Union (ITU), Principle of curve method

ITU-R SM.1132-2-2001 General principles and methods for sharing between radiocommunication services or between radio stations
ITU-R 336-2-1970 Principles of the Devices Used to Achieve Privacy in Radiotelephone Conversations - Section 3B - Radiotelephony
ITU-R SM.1132-2 SPANISH-2001 General principles and methods for sharing between radiocommunication services or between radio stations