ZH
RU
ES
temporary curve method
temporary curve method, Total:82 items.
In the international standard classification, temporary curve method involves: Lamps and related equipment, Power transmission and distribution networks, Furniture, Railway engineering in general, Electrical accessories, Wood, sawlogs and sawn timber, Fluid power systems, Packaging materials and accessories, Waxes, bituminous materials and other petroleum products, Construction materials, Construction equipment, Protective equipment, Installations in buildings, Plastics, Wood-based panels, Paper and board, Electrical wires and cables, Lubricants, industrial oils and related products.
AASHTO - American Association of State Highway and Transportation Officials, temporary curve method
- DIVISION I 10.12-1996 Flexural Members (Interim 1999; Interim 2000;)
- DIVISION I 13.6-1996 Bending Members (Interim 1998)
- DIVISION I 8.17-1996 Reinforcement of Flexural Members (Interim 1997)
- T272-1986 Standard Method of Test for Family of Curves - One-Point Method (Nineteenth Edition; Revised Per Interim Specifications - Tests and Methods - 1999)
- GHC-3-1993 Guide Specifications for Horizontally Curved Highway Bridges (Revised per Interim Specifications - Bridges - 1995)
- T 272-2010 Standard Method of Test for Family of Curves—One Point Method
Underwriters Laboratories (UL), temporary curve method
American National Standards Institute （ANSI), temporary curve method
ESDU - Engineering Sciences Data Unit, temporary curve method
- ESDU 89008 C-1990 Normal-force-curve and pitching-moment-curve slopes of forebody-cylinder combinations at zero angle of attack for Mach numbers up to 5.
- ESDU 88030 A-1994 Boundaries of linear characteristics of cambered and twisted wings at subcritical Mach numbers.
Military Standard of the People's Republic of China-General Armament Department, temporary curve method
- GJB 736.16-1994 Pyrotechnics Test Method Ignition Pressure-Time Curve Determination
- GJB 5309.24-2004 Test methods for pyrotechnics Part 24: Determination of ignition pressure-time curve
- GJB 736.16A-2019 Test methods for pyrotechnics Part 16: Determination of ignition pressure-time curve
American Society for Testing and Materials (ASTM), temporary curve method
- ASTM F2321-03 Standard Specification for Flexible Insulated Temporary By-Pass Jumpers
- ASTM F2321-05 Standard Specification for Flexible Insulated Temporary By-Pass Jumpers
- ASTM F2321-05(2013) Standard Specification for Flexible Insulated Temporary By-Pass Jumpers
- ASTM F2321-23 Standard Specification for Flexible and Rigid Insulated Temporary By-Pass Jumpers
- ASTM F855-97e1 Standard Specifications for Temporary Protective Grounds to Be Used on De-energized Electric Power Lines and Equipment
- ASTM F2321-14 Standard Specification for Flexible and Rigid Insulated Temporary By-Pass Jumpers
- ASTM F2321-14(2020) Standard Specification for Flexible and Rigid Insulated Temporary By-Pass Jumpers
- ASTM F2249-23 Standard Specification for In-Service Test Methods for Temporary Grounding Jumper Assemblies Used on De-Energized Electric Power Lines and Equipment
- ASTM D3813/D3813M-98(2003) Standard Test Method for Curling and Twisting on Unwinding of Pressure-Sensitive Tapes
- ASTM D3813/D3813M-98 Standard Test Method for Curling and Twisting on Unwinding of Pressure-Sensitive Tapes
- ASTM F2249-20 Standard Specification for In-Service Test Methods for Temporary Grounding Jumper Assemblies Used on De-Energized Electric Power Lines and Equipment
- ASTM F2249-18 Standard Specification for In-Service Test Methods for Temporary Grounding Jumper Assemblies Used on De-Energized Electric Power Lines and Equipment
- ASTM F2249-20e1 Standard Specification for In-Service Test Methods for Temporary Grounding Jumper Assemblies Used on De-Energized Electric Power Lines and Equipment
- ASTM F855-15 Standard Specifications for Temporary Protective Grounds to Be Used on De-energized Electric Power Lines and Equipment
RU-GOST R, temporary curve method
National Aeronautics and Space Administration (NASA), temporary curve method
SE-SIS, temporary curve method
CH-SNV, temporary curve method
(U.S.) Ford Automotive Standards, temporary curve method
IN-BIS, temporary curve method
IT-UNI, temporary curve method
- UNI 7816-1978 Site of the principal temporary signals on the railway lines.
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, temporary curve method
- GB/T 42472-2023 Critical current measurement of retained critical current after double bending of silver-coated Bi-2223 superconducting wire at room temperature
- GB/T 4909.6-1985 Test methods for bare wires--Bend test--Single bend test
- GB/T 4909.5-1985 Test methods for bare wires--Bend test--Reverse bend test
The American Road & Transportation Builders Association, temporary curve method
- AASHTO DIVISION I 9.17 Flexural Strength Interim 1997(Standard Specifications for Highway Bridges, Div. 1 - Design)
- AASHTO DIVISION I-A 4.2 Selection of Analysis Method Interim 1999
- AASHTO HM-2021 PT III-2021 STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING and PROVISIONAL STANDARDS PART 3: PROVISIONAL STANDARDS (41st Edition)
- AASHTO DIVISION II 9.3 Bar Lists and Bending Diagrams Interim 1998(Standard Specifications for Highway Bridges, Div. 2 - Construction)
PL-PKN, temporary curve method
- PN H04682-1970 Corrosion protection Temporary corrosion preventives Test methodes
GB-REG, temporary curve method
Association Francaise de Normalisation, temporary curve method
- UTE C31-030:1981 Conditions d'acceptation et de rejet d'une fourniture de fils de bobinage - Prescriptions provisoires
- NF EN 13374+A1:2018 Garde-corps périphériques temporaires - Spécification du produit - Méthodes d'éssai
- NF EN 13374/IN1:2018 Garde-corps périphériques temporaires - Spécification du produit - Méthodes d'éssai
- NF P93-400:2013 Temporary edge protection systems - Product specification - Test methods
- NF T60-173:1994 Produits de protection temporaire contre la corrosion - Évaluation des propriétés de protection contre la corrosion - Méthode de la chambre humide.
International Organization for Standardization (ISO), temporary curve method
- ISO/TS 13725:2001 Hydraulic fluid power - Cylinders - Method for determining the buckling load
- ISO 22183:2023 Plastics — Validation of force-time curves obtained from high-speed tensile tests
AREMA - American Railway Engineering and Maintenance-of-Way Association, temporary curve method
CZ-CSN, temporary curve method
- CSN 03 8403-1986 Agente of temporary protection against corrosion. Method of determínation of solvents content
British Standards Institution (BSI), temporary curve method
- BS EN 13398:2003 Methods of test for petroleum and its products - BS 2000-516:Bitumen and bituminous binders - Determination of the elastic recovery of modified bitumen
- BS EN 13399:2003 Methods of test for petroleum and its products - BS 2000-517:Bitumen and bituminous binders - Determination of storage stability of modified bitumen
- BS EN 13374:2004 Temporary edge protection systems - Product specification, test methods
- BS EN 13375:2004 Flexible sheets for waterproofing-Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles-Specimen preparation
- BS EN 13374:2013 Temporary edge protection systems. Product specification. Test methods
- BS EN 13374:2013+A1:2018(2021) Temporary edge protection systems. Product specification. Test methods
- BS EN 50193:1997 Closed electrical instantaneous water heaters - Methods for measuring performance
- BS EN 13374:2013+A1:2018 Temporary edge protection systems. Product specification. Test methods
- BS ISO 22183:2023 Plastics. Validation of force-time curves obtained from high-speed tensile tests
- 22/30427884 DC BS ISO 22183. Plastics. Validation of force-time curve of tensile testing at high speed
European Committee for Standardization (CEN), temporary curve method
- EN 13374:2013 Temporary edge protection systems - Product specification - Test methods
- HD 323.2.57 S1-1990 Basic environmental testing procedures; part 2: tests; test Ff: vibration; time-history method
CEN - European Committee for Standardization, temporary curve method
- EN 13374:2004 Temporary edge protection systems Product specification@ test methods
Lithuanian Standards Office , temporary curve method
- LST EN 13374-2004 Temporary edge protection systems - Product specification, test methods
Danish Standards Foundation, temporary curve method
- DS/EN 13374:2013 Temporary edge protection systems - Product specification - Test methods
AENOR, temporary curve method
- UNE-EN 13374:2013 Temporary edge protection systems - Product specification - Test methods
German Institute for Standardization, temporary curve method
- DIN EN 13374:2022 Temporary edge protection systems - Product specification - Test methods; German and English version prEN 13374:2022
- DIN EN 13374:2022-02 Temporary edge protection systems - Product specification - Test methods; German and English version prEN 13374:2022 / Note: Date of issue 2022-01-21*Intended as replacement for DIN EN 13374 (2019-06).
- DIN EN 13374:2019-06 Temporary edge protection systems - Product specification - Test methods; German version EN 13374:2013+A1:2018 / Note: To be replaced by DIN EN 13374 (2022-02).
ES-UNE, temporary curve method