ZH
RU
ES

extensometer

extensometer, Total:498 items.

In the international standard classification, extensometer involves: Equipment for the chemical industry, Equipment for the rubber and plastics industries, Paper and board, Paper products, Plastics, Fasteners, Materials for aerospace construction, Products of the textile industry, Construction materials, Testing of metals, Rubber and plastics products, Non-ferrous metals, Cereals, pulses and derived products, Chipless working equipment, Elements of buildings, Leather technology, Reinforced plastics, Mechanical testing, Equipment for the glass and ceramics industries, Iron and steel products, Products of non-ferrous metals, Welding, brazing and soldering, Components for aerospace construction, Pipeline components and pipelines, Protection of and in buildings, Adhesives, Semiconductor devices, Components for electrical equipment, Aerospace fluid systems and components, Ceramics, Fasteners for aerospace construction, Ferrous metals, Corrosion of metals, Materials for the reinforcement of composites, Earthworks. Excavations. Foundation construction. Underground works, Shipbuilding and marine structures in general, Seals, glands, Electromechanical components for electronic and telecommunications equipment, Structures of buildings, Construction equipment, Rubber, Protection against fire, Standardization. General rules, Electrical and electronic testing, Measurement of force, weight and pressure, Wood, sawlogs and sawn timber, Textile machinery, Construction industry, Bridge construction, Clothes, Springs.

German Institute for Standardization, extensometer

DIN 8585-2:2003-09 Manufacturing processes under tensile conditions - Part 2: Stretch reducing; Classification, subdivision, terms and definitions
DIN 8585-4:2003-09 Manufacturing processes forming under tensile conditions - Part 4: Stretch forming; Classification, subdivision, terms and definitions
DIN 8584-2:2003-09 Manufacturing processes forming under combination of tensile and compressive conditions - Part 2: Drawing through constricted tool orifices; Classification, subdivision, terms and definitions
DIN 8585-3:2003-09 Manufacturing processes forming under tensile conditions - Part 3: Bulge forming; Classification, subdivision, terms and definitions
DIN 8585-1:2003-09 Manufacturing processes forming under tensile conditions - Part 1: General; Classification, subdivision, terms and definitions
DIN 65469:1992 Aerospace; fibre-reinforced plastics; tensile test of monolayer flat tension specimens
DIN 50148:1975 Tensile test pieces for non-ferrous metals pressure die castings
DIN EN ISO 8339:2005 Building construction - Sealants - Determination of tensile properties (Extension to break) (ISO 8339:2005); German version EN ISO 8339:2005
DIN 8584-4:2003-09 Manufacturing processes forming under combination of tensile and compressive conditions - Part 4: Spinning; Classification, subdivision, terms and definitions
DIN 8584-1:2003-09 Manufacturing processes forming under combination of tensile and compressive conditions - Part 1: General; Classification, subdivision, terms and definitions
DIN EN ISO 527-2:2012 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012); German version EN ISO 527-2:2012
DIN EN ISO 8340:2005 Building construction - Sealants - Determination of tensile properties at maintained extension (ISO 8340:2005); German version EN ISO 8340:2005
DIN EN ISO 12625-4:2005 Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at break and tensile energy absorption (ISO 12625-4:2005); German version EN ISO 12625-4:2005
DIN 8584-5:2003-09 Manufacturing processes forming under combination of tensile and compressive conditions - Part 5: Forming by raising; Classification, subdivision, terms and definitions
DIN 8584-3:2003-09 Manufacturing processes forming under combination of tensile and compressive conditions - Part 3: Deep drawing; Classification, subdivision, terms and definitions
DIN 8584-6:2003-09 Manufacturing processes forming under combination of tensile and compressive conditions - Part 6: Upset bulging; Classification, subdivision, terms and definitions
DIN 8584-7:2003-09 Manufacturing processes forming under combination of tensile and compressive conditions - Part 7: Hydroforming widening; Classification, subdivision, terms and definitions
DIN EN 1465:2009-07 Adhesives - Determination of tensile lap-shear strength of bonded assemblies; German version EN 1465:2009
DIN EN ISO 5530-2:2015-03 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO 5530-2:2012); German version EN ISO 5530-2:2014 / Note: To be replaced by DIN EN ISO 5530-2 (2020-06).
DIN EN ISO 5530-2:2020-06 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO/DIS 5530-2:2020); German and English version prEN ISO 5530-2:2020 / Note: Date of issue 2020-05-08*Intended as replacement for...
DIN EN ISO 12625-5:2005 Tissue paper and tissue products - Part 5: Determination of wet tensile strength (ISO 12625-5:2005); German version EN ISO 12625-5:2005
DIN 24500-7:1971 Rolling mill equipment; rolling mills for steel, designations for equipment for straightening and stretching
DIN 58141-7:2013-07 Measurement of fiber optic elements - Part 7: Determination of tensile load of fiber optic cables; Text in German and English
DIN 2097:1973 Helical Springs Made of Round Wire; Quality Specifications for Cold Coiled Tension Springs
DIN EN ISO 527-3:2019-02 Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets (ISO 527-3:2018); German version EN ISO 527-3:2018
DIN 7339:1993 Tubular rivets (one piece) drawn from strip
DIN 7339:2011 Hollow rivets, one piece, drawn from strip
DIN EN ISO 5530-2:2020 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO/DIS 5530-2:2020); German and English version prEN ISO 5530-2:2020
DIN EN ISO 9163:2005 Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings (ISO 9163:2005); German version EN ISO 9163:2005
DIN EN ISO 9163:2005-07 Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings (ISO 9163:2005); German version EN ISO 9163:2005
DIN EN ISO 898-5 Berichtigung 1:2007 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar fasteners not under tensile stress (ISO 898-5:1998); German version EN ISO 898-5:1998, Corrigenda to DIN EN ISO 898-5:1998-10
DIN EN ISO 527-2:2012-06 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012); German version EN ISO 527-2:2012
DIN 54459:2011 Structural adhesives - Testing of adhesively bonded joints - Preparation of samples for shear tensile tests from coil coated steel sheets
DIN EN 1465:2009 Adhesives - Determination of tensile lap-shear strength of bonded assemblies; English version of DIN EN 1465:2009-07
DIN EN ISO 527-3:2019 Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets (ISO 527-3:2018)
DIN 43834:1982 Measurement and control; fastening for measuring and control instruments for panel mounting; fastening component; fastening holes in the instrument
DIN 17440:2001 Stainless steels - Technical delivery conditions for drawn wire

SE-SIS, extensometer

SIS MNC 1107-1979 Recommendations for manufacturing tensile test pieces
SIS CSB-27-1965 Stretchers with accessories
SIS MNC 915-1991 Steels for cold rolled sheet for lock-forming and drawing — Summary
SIS SS 11 21 15-1986 Meta/lic materials — Tensile test pieces with gripped ends for wedges — Round test pieces type E
SIS 11 01 38-1969 Sampling for tensile testing and hardness testing of non-ferrous metal sand castings
SIS SS 11 01 35-1984 Grey cast iron - Sampling for tensile testing, hardness testing and microstructure control
SIS SS 11 21 16-1986 Metallic materials — Tensile test pieces with gripped ends for wedges — Flat test pieces type F
SIS SS 11 21 21-1979 Tensile test pieces type L
SIS SS 11 21 13-1986 Metallic materials — Tensile test pieces for screwed holders — Round test pieces type C
SIS SS 11 01 37-1985 Cast iron - Malleable cast kon - Sampling for tensile testing, hardness testing and microstructure control
SIS SS 11 21 14-1986 Metallic materials — Tensile test pieces with enforced ends for screwed holders — Round test pieces type D
SIS SS-ISO 898/5:1986 Mechanical properties of fasteners - Part 5: Set screws and similar threaded fasteners not under tensile stresses

Professional Standard - Chemical Industry, extensometer

HG/T 3243-1987 Technical specifications of tensile stress relaxometer of vulcanized rubber
HG/T 3243-2005 Technical specifications for tensile stress relax meter of vulcanized rubber

国家发展和改革委员会, extensometer

HG/T 3243-2006 Technical conditions for vulcanized rubber tensile stress relaxation instrument

British Standards Institution (BSI), extensometer

BS EN ISO 12625-4:2016 Tissue paper and tissue products. Determination of tensile strength, stretch at maximum force and tensile energy absorption
BS EN ISO 12625-4:2005 Tissue paper and tissue products - Determination of tensile strength, stretch at break and tensile energy absorption
BS EN ISO 8340:2005 Building construction - Sealants - Determination of tensile properties at maintained extension
BS EN ISO 12625-5:2005 Tissue paper and tissue products - Determination of wet tensile strength
BS EN ISO 12625-5:2016 Tissue paper and tissue products. Determination of wet tensile strength
BS IEC 62951-8:2023 Semiconductor devices. Flexible and stretchable semiconductor devices - Test method for stretchability, flexibility, and stability of flexible resistive memory
BS ISO 16241:2005 Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT)
BS EN 62047-2:2006 Semiconductor devices - Micro-electromechanical devices - Part 2: Tensile testing method of thin film materials
BS EN ISO 8339:2005 Building construction - Sealants - Determination of tensile properties (extension to break)
BS EN 1465:2009 Adhesives. Determination of tensile lap-shear strength of bonded assemblies
20/30424984 DC BS EN IEC 62951-8. Semiconductor devices. Flexible and stretchable semiconductor devices. Part 8. Test method for stretchability, flexibility and stability of flexible resistive memory
BS EN 62047-3:2006 Semiconductor devices - Micro-electromechanical devices - Thin film standard test piece for tensile testing
BS EN ISO 5530-2:2015 Wheat flour. Physical characteristics of doughs. Determination of rheological properties using an extensograph
BS EN ISO 527-3:2018 Tracked Changes. Plastics. Determination of tensile properties. Test conditions for films and sheets
20/30374680 DC BS EN ISO 5530-2. Wheat flour. Physical characteristics of doughs - Part 2. Determination of rheological properties using an extensograph
BS ISO 4587:2003 Adhesives - Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
BS EN ISO 9163:2005 Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings
BS 2A 241:2005 General requirements for steel protruding-head bolts of tensile strength 1250 MPa (180000 lbf/in2) or greater - Specification
22/30410876 DC BS ISO 12493. Rubber, vulcanized or thermoplastic. Determination of stress in tension under non-isothermal conditions
23/30454370 DC BS EN IEC 62047-46. Semiconductor devices. Micro-electromechanical devices - Part 46. Silicon based MEMS fabrication technology. Measurement method of tensile strength of nanoscale membrane
BS ISO 13953:2001+A1:2020 Polyethylene (PE) pipes and fittings. Determination of the tensile strength and failure mode of test pieces from a butt-fused joint
BS ISO 13951:2015 Plastics piping systems. Test method for the resistance of plastic pipe/pipe or pipe/fitting assemblies to tensile loading
NA to BS EN 1993-1-11-2006 National Annex (informative) to BS EN 1993‑1‑11:2006, Eurocode 3: Design of steel structures – Part 1‑11: Design of structures with tension components
BS 2L 98:1971 Specification for plate of aluminium-copper-magnesium-manganese alloy (solution treated and aged at room temperature: not controlled stretched) (Cu 4.4, Mg 1.5, Mn 0.6)
BS EN ISO 7539-4:1995 Corrosion of metals and alloys. Stress corrosion testing. Preparation and use of uniaxially loaded tension specimens
BS ISO 16842:2014 Metallic materials. Sheet and strip. Biaxial tensile testing method using a cruciform test piece
BS 8571:2014 Method of test for determination of fracture toughness in metallic materials using single edge notched tension (SENT) specimens
BS EN ISO 3506-3:2009 Mechanical properties of corrosion-resistant stainless steel fasteners - Set screws and similar fasteners not under tensile stress
BS IEC 62951-6:2019 Semiconductor devices. Flexible and stretchable semiconductor devices - Test method for sheet resistance of flexible conducting films

International Organization for Standardization (ISO), extensometer

ISO 527-1:1993/Amd 1:2005 Plastics - Determination of tensile properties - Part 1: General principles; Amendment 1: Details of extensometer
ISO 12625-4:2022 Tissue paper and tissue products — Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption
ISO 12625-4:2005 Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at break and tensile energy absorption
ISO 8340:1984 Building construction; Jointing products; Sealants; Determination of tensile properties at maintained extension
ISO 8340:2005 Building construction - Sealants - Determination of tensile properties at maintained extension
ISO 8339:1984 Building construction; Jointing products; Sealants; Determination of tensile properties
ISO 8340:1984/Cor 1:1995 Building construction - Jointing products - Sealants - Determination of tensile properties at maintained extension; Technical Corrigendum 1
ISO 16241:2005 Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT)
ISO 5530-2:2020 Wheat flour — Physical characteristics of doughs — Part 2: Determination of rheological properties using an extensograph
ISO 12625-5:2005 Tissue paper and tissue products - Part 5: Determination of wet tensile strength
ISO 8339:2005 Building construction - Sealants - Determination of tensile properties (Extension to break)
ISO 9664:1993 Adhesives; test methods for fatigue properties of structural adhesives in tensile shear
ISO 5530-2:2012 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph
ISO 899-1:2003/Amd 1:2015 Plastics - Determination of creep behaviour - Part 1: Tensile creep; Amendment 1
ISO 527-3:2018 Plastics — Determination of tensile properties — Part 3: Test conditions for films and sheets
ISO 9163:2005 Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings
ISO 6892-2:2011 Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature
ISO 6892-2:2018 Metallic materials - Tensile testing- Part 2:Method of test at elevated temperature
ISO 527-3:1995 Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets
ISO/R 154:1960 Shipbuilding details — Marking of rolled, drawn and extruded products in light metals or in light alloys
ISO 9163:1996 Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings
ISO 4587:1995 Adhesives — Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
ISO 12493:2023 Rubber, vulcanized or thermoplastic — Determination of stress in tension under non-isothermal conditions
ISO/AWI 527-2:2023 Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
ISO/CD 527-2:2023 Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
ISO 294-2:2018 Plastics — Injection moulding of test specimens of thermoplastic materials — Part 2: Small tensile bars
ISO 527-2:2012 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics
ISO 527-2:1993 Plastics; determination of tensile properties; part 2: test conditions for moulding and extrusion plastics
ISO 527-3:1995/cor 2:2001 Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets; Technical Corrigendum 2
ISO 898-5:1980 Mechanical properties of fasteners; Part 5 : Set screws and similar threaded fasteners not under tensile stresses
ISO 16842:2014 Metallic materials - Sheet and strip - Biaxial tensile testing method using a cruciform test piece
ISO 294-2:1996/Amd 1:2004 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars; Amendment 1
ISO 16842:2021 Metallic materials - Sheet and strip - Biaxial tensile testing method using a cruciform test piece

(U.S.) Ford Automotive Standards, extensometer

FORD FLTM BO 132-1-2001 TENSILE TESTING OF PARKING BRAKE CABLE COATING
FORD FLTM BP 116-1-2001 PERMANENT TENSILE SET OF CIRCULAR RUBBER COMPONENTS
FORD FLTM BN 013-07-2001 ELONGATION OF AN EXTRUDED, CORED OR UNCORED, VINYL WELT ASSEMBLY UNDER TENSILE LOAD

Society of Automotive Engineers (SAE), extensometer

SAE J1701-2013 Torque-Tension Tightening for Inch Series Fasteners
SAE J1701-2017 Torque-Tension Tightening for Inch Series Fasteners
SAE AMS2360C-2001 Room Temperature Tensile Properties of Castings
SAE AMS2361C-2001 Elevated Temperature Tensile Properties of Castings
SAE AMS2361D-2012 Elevated Temperature Tensile Properties of Castings
SAE AMS2361B-1994 ELEVATED TEMPERATURE TENSILE PROPERTIES OF CASTINGS
SAE AMS2360A-1978 ROOM TEMPERATURE TENSILE PROPERTIES OF CASTINGS
SAE AMS2360D-2012 Room Temperature Tensile Properties of Castings
SAE AMS2360B-1994 ROOM TEMPERATURE TENSILE PROPERTIES OF CASTINGS
SAE AMS2361-1966 ELEVATED TEMPERATURE TENSILE PROPERTIES OF CASTINGS
SAE AMS2361A-1978 ELEVATED TEMPERATURE TENSILE PROPERTIES OF CASTINGS
SAE AMS2360-1966 ROOM TEMPERATURE TENSILE PROPERTIES OF CASTINGS
SAE AMS2360E-2019 Room Temperature Tensile Properties of Castings
SAE AMS2361E-2019 Elevated Temperature Tensile Properties of Castings
SAE J174-2019 Torque-Tension Test Procedure for Steel Threaded Fasteners Inch Series
SAE J174M-2013 Torque-Tension Test Procedure for Steel Threaded fasteners Metric Series
SAE J174-2013 Torque-Tension Test Procedure for Steel Threaded Fasteners Inch Series
SAE J174M-1998 Torque-Tension Test Procedure for Steel Threaded fasteners Metric Series
SAE J174-1998 Torque-Tension Test Procedure for Steel Threaded Fasteners Inch Series
SAE USCAR10-2007 Test for evaluating the torque-tension relationship of both external and internal metric threaded fasteners
SAE AMS4164H-2003 Aluminum Alloy, Extrusions 4.4Cu 1.5Mg 0.60Mn (2024-T3510) Stress-Relief Stretched, Unstraightened
SAE AMS2355-1965 TENSILE TESTING OF WROUGHT ALUMINUM AND MAGNESIUM PRODUCTS Except Forgings
SAE AMS2355A-1967 TENSILE TESTING OF WROUGHT ALUMINUM AND MAGNESIUM PRODUCTS Except Forgings
SAE AS5688-1998 Cable Assemblies, Aircraft, Proof Testing and Prestretching of
SAE AMS4402-2006 Aluminum Alloy, Extruded Profiles (2024-T432) 4.4Cu - 1.5Mg - 0.6Mn Annealed, Stretch Formed, Solution Heat Treated and Stress Relieved by Stretching UNS A92027
SAE AMS5316D-1987 Ductile (Nodular) Iron Castings, Sand, 80,000 psi (550 MPa) Tensile Strength, As Cast
SAE AMS5075F-2001 Steel Tubing, Seamless 0.22 - 0.28C (SAE 1025) Cold Drawn and Stress Relieved UNS G10250
SAE AMS2759/2D-2007 Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 ksi (1517 MPa) and Higher
SAE AMS3901/3D-2008 Yarn, Organic Fiber (Para-Aramid), High Modulus OY 390 (2689)/2309 Tensile Strength 16.5 (114)/900 Tensile Modulus 1140 Denier, (1270 d tex), 0.6% Finish
SAE AMS6325G-1994 Steel Bars and Forgings, 0.50Cr 0.55Ni 0.25Mo (0.38-0.43C) Heat Treated, 105 ksi (724 MPa) Tensile Strength (Reaffirmed: 01 Sept 2000)
SAE AMS4165H-2003 Aluminum Alloy, Extrusions 4.4Cu 1.5Mg 0.60Mn (2024-T3511) Solution Heat Treated, Stress-Relieved by Stretching, and Straightened
SAE TS23-9-2004 TS23 Manufacturing Specification for Bolts 1000 MPa (145,000 lbf/in²) Tensile at Room Temperature
SAE AMS6474A-2008 Forgings, Hardenable Steels and Corrosion-Resistant Steels Heat-Treated, Finished-Part Properties Short-Transverse Tensile Strength and Fracture Toughness
SAE AS7477E-2011 Bolts and Screws, Steel, UNS S66286 Tensile Strength 130 ksi, Procurement Specification
SAE TS145-4-2004 TS145 Manufacturing Specification for Bolts 1000 MPa (145,000 lbf/in²) Tensile at Room Temperature
SAE TS21-11-2004 TS21 Manufacturing Specification for Bolts 900 MPa (130,000 lbf/in²) Tensile at Room Temperature
SAE AMS2759/2C-2000 Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 Ksi (1517 MPa) and Higher
SAE AMS4294-2001 Aluminum Alloy Extrusions 1.0Mg - 0.60Si - 0.28Cr (6061-T5511) Press Heat Treated, Stress Relieved by Stretching, Straightened, and Artificially Aged UNS A96061
SAE AMS6532D-2006 Steel, Bars and Forgings 3.1Cr - 11.5Ni - 13.5Co - 1.2Mo (0.21 - 0.25C) Vacuum Melted, Normalized and Overaged Precipitation Hardenable UNS K92580
SAE AMS6325H-2004 Steel Bars and Forgings, 0.50Cr 0.55Ni 0.25Mo (0.38-0.43C) (SAE 8740) Heat Treated, 105 ksi (724 MPa) Tensile Strength
SAE AMS2759/1C-2000 Heat Treatment of Carbon and Low-Alloy Steel Parts Minimum Tensile Strength Below 220 ksi (1517 MPa)
SAE MA3377B-2008 Bolts and Screws, Nickel Alloy UNS NO7718, Tensile Strength 1275 MPa Procurement Specification, Metric
SAE AMS2759/1D-2007 Heat Treatment of Carbon and Low-Alloy Steel Parts Minimum Tensile Strength Below 220 ksi (1517 MPa)
SAE MA3376B-1997 Bolts& Screws, UNS G87400 Tensile Strength 860 MPa& 1000 MPa Procurement Specification, Metric UNS G87400; FSC 5306
SAE MA3375B-1995 Studs, Corrosion and Heat Resistant Steel, UNS S66286 Tensile Strength 900 MPa, Procurement Specification, Metric FSC 5307
SAE AMS4169K-2003 Aluminum Alloy, Extrusions 5.6Zn 2.5Mg 1.6Cu 0.23Cr (7075-T6511) Solution Heat Treated, Stress Relieved by Stretching, Straightened and Precipitation Heat Treated
SAE AMS5637G-2001 Steel, Corrosion Resistant, Bars and Wire 18Cr - 9.0Ni (SAE 30302) Solution Heat Treated and Cold Drawn 125 ksi (862 MPa) Tensile Strength UNS S30200
SAE AMS4168J-2003 Aluminum Alloy, Extrusions 5.6Zn 2.5Mg 1.6Cu 0.23Cr (7075-T6510) Solution Heat Treated, Stress Relieved by Stretching, and Precipitation Heat Treated, Unstraightened
SAE AMS4173E-2003 Aluminum Alloy, Extrusions 1.0Mg 0.60Si 0.30Cu 0.20Cr (6061-T6511) Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Precipitation Heat Treated
SAE AMS6327H-2003 Steel Bars and Forgings 0.50Cr 0.55Ni 0.25Mo (0.38 0.43C) (SAE 8740) Heat Treated, 125 ksi (862 MPa) Tensile Strength
SAE AMS6346A-2005 Steel Bars 0.95Cr - 0.20Mo (0.28 to 0.33C) (SAE 4130) Hardened and Tempered, 125 Ksi (862 MPa) Tensile Strength UNS G41300
SAE AMS6472D-2001 Steel Bars and Forgings, Nitriding 1.6Cr 0.35Mo 1.1Al (0.38-0.43C) Hardened and Tempered, 112 ksi (772 MPa) Tensile Strength
SAE AMS5519N-2008 Steel, Corrosion Resistant, Sheet and Strip 18Cr 8Ni (SAE 30301) Cold Rolled, 185 ksi (1276 MPa) Tensile Strength
SAE J174-1996 Torque-Tension Test Procedure for Steel Threaded Fasteners Inch Series

SAE - SAE International, extensometer

SAE AMS2361D-2007 Elevated Temperature Tensile Properties of Castings
SAE AMS2360B-1990 Room Temperature Tensile Properties of Castings
SAE AMS2361B-1990 Elevated Temperature Tensile Properties of Castings
SAE AMS2360D-2007 Room Temperature Tensile Properties of Castings
SAE J174-1971 TORQUE-TENSION TEST PROCEDURE FOR STEEL THREADED FASTENERS
SAE AMS2759/2G-2018 Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 ksi (1517 MPa) and Higher

KR-KS, extensometer

KS M ISO 12625-4-2016 Tissue paper and tissue products－Part 4：Determination of tensile strength, stretch at break and tensile energy absorption
KS M ISO 12625-4-2022 Tissue paper and tissue products — Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption
KS M ISO 12625-5-2016 Tissue paper and tissue products－Part 5：Determination of wet tensile strength
KS V ISO 6043-2013(2023) Shipbuilding and marine structures — Eye and fork assemblies under tension load — Main dimensions
KS M ISO 527-3-2018 Plastics — Determination of tensile properties — Part 3: Test conditions for films and sheets
KS M ISO 4587-2016 Adhesives－Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies

American Society for Testing and Materials (ASTM), extensometer

ASTM F2280-06 Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength
ASTM D4964-96(2008)e1 Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine)
ASTM D828-22 Standard Test Method for Tensile Properties of Paper and Paperboard Using Constant-Rate-of-Elongation Apparatus
ASTM F2280-08 Standard Specification for x201C;Twist Offx201D; Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength
ASTM F3043-15 Standard Specification for &x201c;Twist Off&x201d; Type Tension Control Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength
ASTM F3043-14 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength
ASTM F3043-14e1 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength
ASTM D6818-14 Standard Test Method for Ultimate Tensile Properties of Rolled Erosion Control Products
ASTM G49-85(2005) Standard Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens
ASTM E8M-00a Standard Test Methods for Tension Testing of Metallic Materials [Metric]
ASTM E8M-01 Standard Test Methods for Tension Testing of Metallic Materials [Metric]
ASTM E8M-01e1 Standard Test Methods for Tension Testing of Metallic Materials [Metric]
ASTM E8M-01e2 Standard Test Methods for Tension Testing of Metallic Materials [Metric]
ASTM E8M-04 Standard Test Methods for Tension Testing of Metallic Materials [Metric]
ASTM E8-99 Standard Test Methods for Tension Testing of Metallic Materials
ASTM E8M-00b Standard Test Methods for Tension Testing of Metallic Materials [Metric]
ASTM E8M-03 Standard Test Methods for Tension Testing of Metallic Materials [Metric]
ASTM E8/E8M-16ae1 Standard test method for tensile testing of metallic materials (metric)
ASTM B603-90(2001) Standard Specification for Drawn or Rolled Iron-Chromium-Aluminum Alloys for Electrical Heating Elements
ASTM B603-90(1995) Standard Specification for Drawn or Rolled Iron-Chromium-Aluminum Alloys for Electrical Heating Elements
ASTM B603-90(1995)e1 Standard Specification for Drawn or Rolled Iron-Chromium-Aluminum Alloys for Electrical Heating Elements
ASTM D829-97 Standard Test Methods for Wet Tensile Breaking Strength of Paper and Paper Products
ASTM B208-14(2021) Standard Practice for Preparing Tension Test Specimens for Copper Alloy Sand, Permanent Mold, Centrifugal, and Continuous Castings
ASTM F2403-09 Standard Specification for Inch Series Machine Screws, Carbon Steel, 60 000 psi Tensile Strength
ASTM B557M-02a Standard Test Methods of Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products [Metric]
ASTM G49-85(2000) Standard Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens
ASTM G49-85(2011) Standard Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens
ASTM G49-85(2019) Standard Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens
ASTM D3689/D3689M-22 Standard Test Methods for Deep Foundation Elements Under Static Axial Tensile Load
ASTM F19-64(2005)e1 Standard Test Method for Tension and Vacuum Testing Metallized Ceramic Seals
ASTM F2403-06 Standard Specification for Inch Series Machine Screws, Carbon Steel, 60 000 psi Tensile Strength
ASTM F2403-05 Standard Specification for Inch Series Machine Screws, Carbon Steel, 60 000 psi Tensile Strength
ASTM D8363-20 Standard Test Method for Rubber—Stress Relaxation in Tension Under Non-Isothermal Conditions
ASTM E2573-17 Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics
ASTM E2573-19 Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics
ASTM B557M-14 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric)
ASTM E2573-12 Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics
ASTM F2882/F2882M-17 Standard Specification for Screws, Alloy Steel, Heat Treated, 170 ksi and 1170 MPa Minimum Tensile Strength (Inch and Metric)
ASTM D7056-07(2018) Standard Test Method for Determining the Tensile Shear Strength of Prefabricated Bituminous Geomembrane Seams
ASTM A325-10e1 Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
ASTM D7056-04 Standard Test Method for Determining the Tensile Shear Strength of Pre-Fabricated Bituminous Geomembrane Seams
ASTM C907-98 Standard Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method
ASTM C907-17(2018) Standard Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method
ASTM C907-17 Standard Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method
ASTM D7056-07 Standard Test Method for Determining the Tensile Shear Strength of Pre-Fabricated Bituminous Geomembrane Seams
ASTM D7056-07(2012) Standard Test Method for Determining the Tensile Shear Strength of Pre-Fabricated Bituminous Geomembrane Seams
ASTM B557M-15(2023) Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric)
ASTM D6742/D6742M-12 Standard Practice for Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates
ASTM F3148-17 Standard Specification for High Strength Structural Bolt Assemblies, Steel and Alloy Steel, Heat Treated, 144ksi Minimum Tensile Strength, Inch Dimensions
ASTM F3148-17a Standard Specification for High Strength Structural Bolt Assemblies, Steel and Alloy Steel, Heat Treated, 144ksi Minimum Tensile Strength, Inch Dimensions
ASTM E2359-06 Standard Test Method for Field Pull Testing of an In-Place Exterior Insulation and Finish System Clad Wall Assembly

Group Standards of the People's Republic of China, extensometer

T/SXMES 11-2022 Preparation of tensile specimens for gray cast iron pipes and fittings
T/GAMA 15-2021 Test method for tensile properties of additively manufactured powder bed laser fused parts

HU-MSZT, extensometer

CZ-CSN, extensometer

CSN 80 0812-1982 Fiat textiles. Determination of tensile strength and drawing quality
CSN 42 0336-1982 Copper-base alloy casting. Test samples and test pieces for tensile test
CSN 42 0329-1964 Cylindrical test pieces for tensile testing of grey cast iron
CSN 42 0314-1980 Metal testing. Test pieces of circular cross-section with heads for holding rings for tensile testing of metals
CSN 42 0316-1980 Metal testing. Test pieces circular cross-section with screwed gripped heads for the tensile testing of metals
CSN 42 0315-1980 Metal testing. Test pieces of circular cross-section with cylindrical gripped heads for tensile testing of metals
CSN 64 0626-1989 Plastics. Determination of tensile trenght of thermoplastics pipes on n annular test piece
CSN 35 4055 Cast.89-1987 Electromechanical components for electronic equipment. Cable-clamp resistance to cable pull (tensile)
CSN 42 0317-1980 Metal testing. Test pieces of circular cross-section with upset gripped heads for tensile testing of metals
CSN 42 0331-1985 Metal testing. Test pieces of circular cross-section with cylindrical gripped heads for tensile testing of malleable cast iron
CSN 42 0320-1963 Test pieces of rectangular cross-section, thickness greater than 0,1 & less than 4 mm for tensile testing of metals
CSN 42 0321-1982 Metal testing. Test pieces of rectangular cross-section, thickness from 0,1 to 4 mm for tensile testing of metals

Korean Agency for Technology and Standards (KATS), extensometer

KS M ISO 12625-4:2006 Tissue paper and tissue products-Part 4:Determination of tensile strength, stretch at break and tensile energy absorption
KS M ISO 12625-4:2016 Tissue paper and tissue products－Part 4：Determination of tensile strength, stretch at break and tensile energy absorption
KS M ISO 12625-4:2022 Tissue paper and tissue products — Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption
KS B 0950-2009(2019) Metallic materials－Instrumented indentation test for indentation tensile properties
KS B 0801-2007(2017) Test pieces for tensile test for metallic materials
KS M ISO 12625-5:2006 Tissue paper and tissue products-Part 5:Determination of wet tensile strength
KS M ISO 9664:2010 Adhesives－Test methods for fatigue properties of structural adhesives in tensile shear
KS M ISO 527-3:2018 Plastics — Determination of tensile properties — Part 3: Test conditions for films and sheets
KS M ISO 4587:2008 Adhesives-Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
KS M ISO 4587:2016 Adhesives－Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
KS M ISO 4587-2016(2021) Adhesives－Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
KS M ISO 527-2-2013(2018) Plastics ㅡ Determination of tensile properties ㅡ Part 2: Test conditions for moulding and extrusion plastics
KS M ISO 527-2:2013 Plastics ㅡ Determination of tensile properties ㅡ Part 2: Test conditions for moulding and extrusion plastics
KS M ISO 527-2:2008 Plastics-Determination of tensile properties-Part 2:Test conditions for moulding and extrusion plastics
KS C IEC 62047-8:2015 Semiconductor devices ― Micro-electromechanical devices ― Part 8: Strip bending test method for tensile property measurement of thin films

Association Francaise de Normalisation, extensometer

NF G83-101*NF EN 931+A2:2009 Footwear manufacturing machines - Lasting machines - Safety requirements
NF T51-111:1997 Plastics. Determination of tensile-impact strength.
NF Q34-030-4:2005 Tissue paper and tissue products - Part 4 : determination of tensile strength, stretch at break and tensile energy absorption.
NF T51-034-2:1996 Plastics. Determination of tensile properties. Part 2 : test conditions for moulding and extrusion plastics.
NF Q34-030-5:2005 Tissue paper and tissue products - Part 5 : determination of wet tensile strength.
NF EN 1465:2009 Adhésifs - Détermination de la résistance au cisaillement en traction d'assemblages collés à recouvrement simple
NF EN ISO 8362-1:2019 Récipients et accessoires pour produits injectables - Partie 1 : flacons en verre étiré
NF V03-717-2*NF EN ISO 5530-2:2015 Wheat flour - Physical characteristics of doughs - Part 2 : determination of rheological properties using a extensograph
NF T76-107*NF EN 1465:2009 Adhesives - Determination of tensile lap-shear strength of bonded assemblies.
NF EN ISO 22776:2005 Chaussures - Méthodes d'essai pour accessoires : fermetures auto-agrippantes - Résistance à la traction avant et après un usage répété
NF EN ISO 9163:2005 Verres textiles - Stratifils - Fabrication d'éprouvettes et essai de traction sur stratifil imprégné
NF EN ISO 5530-2:2015 Farines de blé tendre - Caractéristiques physiques des pâtes - Partie 2 : détermination des caractéristiques rhéologiques au moyen de l'extensographe
NF E25-030-1:2014 Fasteners - Threaded connections with ISO metric thread - Part 1 : design rules for tensile loaded bolted joints - Simplified procedure
NF E25-030-2:2014 Fasteners - Threaded connections with ISO metric thread - Part 2 : design rules for tensile loaded bolted joints - Complete procedure
NF T51-034-3*NF EN ISO 527-3:2018 Plastics - Determination of tensile properties - Part 3 : test conditions for films and sheets
NF L17-956:1995 Aircraft industry. Synthetic cloths for the fabric of airplane structures. Determination of the load and elongation at rupture by tensile testing of cloths in delivery condition and of free coated cloths.
NF T76-107:1995 Adhesives. Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies.
NF EN ISO 9018:2015 Essais destructifs des soudures sur matériaux métalliques - Essai de traction des assemblages en croix et à recouvrement
NF EN ISO 12625-5:2017 Papier tissue et produits tissue - Partie 5 : détermination de la résistance à la rupture par traction à l'état humide
NF B38-153*NF EN ISO 9163:2005 Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings
NF ISO 19744:2022 Conditions d'essai des machines à brocher à commande numérique - Contrôle de l'exactitude - Machines verticales à brocher les extérieurs
NF EN 12814-2:2021 Essais des assemblages soudés sur produits semi-finis en thermoplastiques - Partie 2 : essai de traction
NF E25-100-8:1998 Mechanical properties of corrosion-resistant stainless-steel fasteners. Part 3 : set screws and similar fasteners not under tensile stress.
NF T51-034-2*NF EN ISO 527-2:2012 Plastics - Determination of tensile properties - Part 2 : test conditions for moulding and extrusion plastics
NF A03-003:1994 Metallic materials. Tensile test. Part 3 : calibration of force proving instruments used for the verification of uniaxial testing machines.
NF EN 12814-3:2014 Essais des assemblages soudés sur produits semi-finis en thermoplastiques - Partie 3 : essai de fluage en traction
NF EN 12814-6:2000 Essais des assemblages soudés sur produits semi-finis en thermoplastiques - Partie 6 : essai de traction à basse température
NF EN 62047-25:2016 Dispositifs à semiconducteurs - Dispositifs microélectromécaniques - Partie 25 : technologie de fabrication de MEMS à base de silicium - Méthode de mesure de la résistance à la traction-compression et au cisaillement d'une micro zone de brasure
NF T51-170-2*NF EN ISO 22088-2:2006 Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 2 : constant tensile load method
NF ISO 6779:2019 Conditions de réception des machines verticales à brocher les intérieurs - Contrôle de l'exactitude
NF EN 12814-7:2003 Essais des assemblages soudés sur produits semi-finis en thermoplastiques - Partie 7 : essai de traction avec éprouvettes entaillées en U
NF E25-106-2*NF EN 13906-2:2013 Cylindrical helical springs made from round wire and bar - Calculation and design - Part 2: extension springs
NF C19-200*NF EN IEC 60987:2021 Nuclear power plants - Instrumentation and control important to safety - Hardware requirements
NF EN 62047-8:2011 Dispositifs à semiconducteurs - Dispositifs microélectromécaniques - Partie 8 : méthode d'essai de la flexion de bandes en vue de la mesure des propriétés de traction des couches minces

AIA/NAS - Aerospace Industries Association of America Inc., extensometer

NAM1312-108-1997 Fastener Test Methods@ Metric; Method 108 Tensile Strength
NAM1312-111-2013 FASTENER TEST METHODS@ METRIC METHOD 111 TENSION FATIGUE (Rev 1)
NAM1312-108-2012 FASTENER TEST METHODS@ METRIC METHOD 108 TENSILE STRENGTH (Rev 1)
NA0007-2013 METRIC FASTENERS@ TITANIUM ALLOY@ EXTERNALLY THREADED@ 1100 MPa TENSILE@ 660 MPa SHEAR (Rev 3)
NAS1069-2012 TENSION FATIGUE TEST PROCEDURE FOR AERONAUTICAL FASTENERS (Rev 3)
NAS1069-1959 Tension Fatigue Test Procedure for Aeronautical Fasteners (Rev 2)
NAS1348-1979 Fasteners - Recommended Tensile Stress Areas for External Threaded (Rev 1)
NASM1312-23-2012 FASTENER TEST METHODS METHOD 23 TENSILE STRENGTH OF PANEL FASTENERS (Rev 1)
NASM1312-23-2017 FASTENER TEST METHODS METHOD 23 TENSILE STRENGTH OF PANEL FASTENERS (Rev 2)
NA0057-1994 Procurement Specification@ Metric Fasteners@ Alloy Steel@ Externally Threaded@ 1250 MPa Tensile@ 750 MPa Shear (Rev 2)
NA0057-2013 PROCUREMENT SPECIFICATION@ METRIC FASTENERS@ ALLOY STEEL@ EXTERNALLY THREADED@ 1250 MPa TENSILE@ 750 MPa SHEAR (Rev 3)
NA0008-2013 PROCUREMENT SPECIFICATION@ METRIC FASTENERS@ ALLOY STEEL@ EXTERNALLY THREADED@ 1100 MPa TENSILE@ 660 MPa SHEAR (Rev 3)
NA0026-2011 PROCUREMENT SPECIFICATION@ METRIC FASTENERS@ A-286 CRES EXTERNALLY THREADED@ 1100 MPa TENSILE@ 660 MPa SHEAR (Rev 3)
NA0008-1994 Procurement Specification Metric Fasteners@ Alloy Steel@ Externally Threaded@ 1100 MPa Tensile@ 660 MPa Shear (Rev 2)
NA0160-1993 Screw@ Fairing Washer@ Assembly@ 6AL-4V Titanium Alloy@ Offset Cruciform Recess@ Full Thread@ 1100MPa Tensile@ Metric (Rev 2)
NA0159-2012 SCREW@ FAIRING WASHER@ ASSEMBLY@ ALLOY STEEL@ OFFSET CRUCIFORM RECESS@ FULL THREAD@ 1100 MPa TENSILE@ METRIC (Rev 3)

Danish Standards Foundation, extensometer

DS/EN ISO 12625-4:2005 Tissue paper and tissue products – Part 4: Determination of tensile strength, stretch at break and tensile energy absorption
DS/ISO 21765:2020 Textiles – Determination of fabric deformability by forced mechanical distension
DS/EN 1465:2009 Adhesives - Determination of tensile lap-shear strength of bonded assemblies
DS/EN ISO 12625-5:2005 Tissue paper and tissue products – Part 5: Determination of wet tensile strength
DS/ISO 5530-2:2012 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph
DS/EN ISO 9163:2005 Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings
DS/EN 62047-2:2007 Semiconductor devices - Micro-electromechanical devices - Part 2: Tensile testing method of thin film materials
DS/EN ISO 527-3/AC:2001 Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets
DS/EN ISO 527-3/AC:1999 Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets
DS/EN ISO 527-3:1996 Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets
DS/ISO 8340:1985 Building construction. Jointing products. Sealants. Determination of tensile properties at maintained extension
DS/EN ISO 527-2:2012 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics
DS/ISO 898/5:1982 Mechanical properties of fasteners. Part 5: Set screws and similar threaded fasteners not under tensile stresses
DS/ISO 13953:2001 Polyethylene (PE) pipes and fittings - Determination of the tensile strength and failure mode of test pieces from a butt-fused joint
DS/EN 62047-8:2011 Semiconductor devices - Micro-electromechanical devices - Part 8: Strip bending test method for tensile property measurement of thin films

Indonesia Standards, extensometer

SNI ISO 12625-4:2014 Tissue paper and tissue products Part 4 : Determination of tensile strength, stretch at break and tensile energy absorption
SNI ISO 12625-5:2014 Tissue paper and tissue products Part 5: Determination of wet tensile strength
SNI 06-4209.2-1998 Plastics - Determination of tensile properties - Part 2 : Test condition for maulding and extrusion plastics
SNI ISO 527-2:2011 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics
SNI ISO 13935-2:2012 Textiles - Fabrics and made-up textile articles-Determination of seam tensile properties- Part 2: Grab method

Aerospace Industries Association, extensometer

AIA NAM1312-108-1997 Fastener Test Methods, Metric; Method 108 Tensile Strength FSC 53GP
AIA NASM1312-23-1997 Fastener Test Methods; Method 23 Tensile Strength of Panel Fasteners FSC 53GP
AIA NAS 1069-1959 Tension Fatigue Test Procedure for Aeronautical Fasteners (Rev. 2) R(1992)
AIA NAS 1348-1979 (Inactive)Fasteners - Recommended Tensile Stress Areas for External Threaded (Rev. 1)
AIA NA 0057-1994 Procurement Specification, Metric Fasteners, Alloy Steel, Externally Threaded, 1250 MPa Tensile, 750 MPa Shear (Rev. 2)
AIA NA 0007-1994 Procurement Specification Metric Fasteners, Titanium Alloy, Externally Threaded, 1100 MPa Tensile, 660 MPa Shear (Rev. 2)
AIA NA 0008-1994 Procurement Specification Metric Fasteners, Alloy Steel, Externally Threaded, 1100 MPa Tensile, 660 MPa Shear (Rev. 2)
AIA NA 0026-1994 Procurement Specification, Metric Fasteners, A-286 CRES Externally Threaded, 1100 MPa Tensile, 660 MPa Shear (Rev. 2)

Professional Standard - Aviation, extensometer

HB 6767-1993 Specifications for cylindrical helical compression and tension springs made of piano steel wire
HB 5869-1990 Specifications for cylindrical helical compression and tension springs made of stainless steel wire
HB 5869-1984 Specifications for cylindrical helical compression and tension springs made of stainless steel wire
HB 3-56-1990 Specifications for cylindrical helical compression and tension springs made of carbon alloy steel wire
HB 3-56-1983 Specifications for cylindrical helical compression and tension springs made of carbon alloy steel wire
HB/Z 88-1990 Design and manufacture of cylindrical spiral compressed, extension springs made of stainless steel wire
HB/Z 88-1984 Design and Manufacture of Stainless Steel Wire Cylindrical Helical Compression and Extension Springs
HB/Z 240-1993 Design and Manufacture of Piano Steel Wire Cylindrical Helical Compression and Tension Springs
HB/Z 18-1983 Instructional Technical Documents for the Design and Manufacture of Carbon and Alloy Steel Wire Cylindrical Helical Compression and Tension Springs
HB/Z 18-1990 Design and manufacture of cylindrical spiral compressed, extension springs made of carbon alloy steel wire
HB/Z 352-2002 Stabilizing treatment for metallic parts of precise equipment & instrument for aviation

AASHTO - American Association of State Highway and Transportation Officials, extensometer

DIVISION I 8.25-1996 Development of Deformed Bars and Deformed Wire in Tension
T 68M-2005 Standard Method of Test for Tension Testing of Metallic Materials [Metric]
PP 95-2018 Standard Specification for Preparation of Indirect Tension Performance Test Specimens
T 68M-2003 Standard Method of Test for Tension Testing of Metallic Materials [Metric] (ASTM Designation: E 8M-01e1)
T68M-2000 Standard Method of Test for Tension Testing of Metallic Materials [Metric] (Twentieth Edition; ASTM E8M-99)

Standard Association of Australia （SAA）, extensometer

AS 1180.2:1972 Methods of test for hose made from elastomeric materials - Tensile strength and elongation
AS 1391:2007 Metallic materials - Tensile testing at ambient temperature
AS 2291:2007 Metallic materials - Tensile testing at elevated temperatures
AS 1145.3:2001 Determination of tensile properties of plastics materials - Test conditions for films and sheets
AS 4291.5:2000 Mechanical properties of fasteners made of carbon steel and alloy steel - Set screws and similar threaded fasteners not under tensile stress
AS 1145.2:2001 Determination of tensile properties of plastics materials - Test conditions for moulding and extrusion plastics
AS 1180.11:1982 Methods of test for hose made from elastomeric materials - Hose and coupling compatibility - Tensile method
AS 1145.5:2001 Determination of tensile properties of plastics materials - Test conditions for fibre-reinforced plastic composites

European Committee for Standardization (CEN), extensometer

EN ISO 527-2:2012 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)
EN 931:1997 Footwear manufacturing machines - Lasting machines - Safety requirements (Incorporates Amendment A2: 2009)
EN 1465:2009 Adhesives - Determination of tensile lap-shear strength of bonded assemblies
EN ISO 8340:2005 Building construction - Sealants - Determination of tensile properties at maintained extension
EN ISO 898-5:2012 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012)
EN ISO 5530-2:2014 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph
EN 10002-3:1994 Metallic Materials - Tensile Test - Part 3: Calibration of Force Proving Instruments Used for the Verification of Uniaxial Testing Machines
EN ISO 6892-2:2018 Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature
EN ISO 6892-2:2011 Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011)
EN ISO 898-5:1998 Mechanical Properties of Fasteners Made of Carbon Steel and Alloy Steel - Part 5: Set Screws and Similar Threaded Fasteners Not under Tensile Stresses ISO 898-5:1998
FprEN ISO 5530-2 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO/FDIS 5530-2:2021)
EN ISO 899-1:2003/A1:2015 Plastics - Determination of creep behaviour - Part 1: Tensile creep - Amendment 1 (ISO 899-1:2003/Amd 1:2015)
prEN ISO 527-2 rev Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
EN 1465:1994 Adhesives - Determination of Tensile Lap-Shear Strength of Rigid-To-Rigid Bonded Assemblies (ISO 4587:1979 Modified)
EN ISO 527-2:1996 Plastics - Determination of Tensile Properties - Part 2: Test Conditions for Moulding and Extrusion Plastics ISO 527-2 : 1993 Including Corr 1 : 1994
EN ISO 9163:2005 Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings
EN ISO 527-5:2021 Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:2021)
EN ISO 527-5:2009 Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, extensometer

GB/T 14615-2006 Wheat flour.Physical characteristics of doughs.Determination of rheological properties using an extensograph
GB/T 1040.3-2006 Plastics. Determination of tensile properties. Part 3: Test conditions for films and sheets
GB/T 20310-2006 Textile glass.Rovings.Manufacture of test specimens and determination of tensile strength of impregnated rovings
GB/T 1040.2-2006 Plastics. Determination of tensile properties. Part 2: Test conditions for moulding and extrusion plastics
GB/T 1040.2-2022 Plastics—Determination of tensile properties—Part 2: Test conditions for moulding and extrusion plastics
GB/T 23427-2009 Shipbuilding and marine structures.Eye and fork assemblies under tension load.Main dimensions
GB/T 19808-2005 Plastics pipes and fittings.Peel decohesion test for polyethylene(PE)electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm
GB/T 1040.5-2008 Plastic.Determination of tensile properties.Part 5:Test conditions for unidirectional fibre-reinforced plastic composites

RU-GOST R, extensometer

GOST 19859-1974 Plates for sheet stamping cupping dies (blanks). Specifications
GOST R 59690-2021 Materials and accessories for stretch ceilings. General specifications
GOST 27706-1988 Bath type ovens for making drawn sheet glass. Calculation of power-consuming indices
GOST 28870-1990 Steel. Methods tensile tests of rolled thick-plates in the thickness direction
GOST R 56650-2015 Polymer composites. Methods for determination of tensile properties of pultruded glass-reinforced plastic rods
GOST 23117-1991 Semiautomatic grips for tensioning of the steel in prestressed concrete structures. Specifications
GOST 30630.1.6-2013 Mechanical environment stability test methods for machines instruments and other industrial products. Bending, torn, tensile and compression tests of electrical terminals, fittings and other parts being connecting up
GOST R 51911-2002 Mechanical environment stability test methods for machines, instruments and other industrial products. Bending, torn, tensile and compression tests of electrical terminals, fittings and other parts being connecting up
GOST R ISO 1472-1993 Textile machinery and accessories. Cylindrical tubes for draw-twisters. Dimensions and permissible run-out
GOST R 57971-2017 Ceramic composites. Determination of tensile strength at the hoop tension at normal temperature on cylindrical samples with elastomeric inserts

AENOR, extensometer

UNE 82502:2007 Instruments intended to measure braking forces in service motor vehicles: Roller brake meters.
UNE-EN 1465:2009 Adhesives - Determination of tensile lap-shear strength of bonded assemblies
UNE-EN ISO 5530-2:2015 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO 5530-2:2012)
UNE-EN ISO 9163:2006 Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings (ISO 9163:2005)
UNE-EN ISO 527-3:1996 PLASTICS. DETERMINATION OF TENSILE PROPERTIES. PART 3: TEST CONDITIONS FOR FILMS AND SHEETS. (ISO 527-3:1995).

Aerospace Industries Association/ANSI Aerospace Standards, extensometer

AIA/NAS NAM1312-108-2012 FASTENER TEST METHODS, METRIC METHOD 108 TENSILE STRENGTH (Rev 1)
AIA/NAS NAM1312-111-2013 FASTENER TEST METHODS, METRIC METHOD 111 TENSION FATIGUE (Rev 1)
AIA/NAS NA0007-2013 METRIC FASTENERS, TITANIUM ALLOY, EXTERNALLY THREADED, 1100 MPa TENSILE, 660 MPa SHEAR (Rev 3)
AIA/NAS NASM1312-23-2012 FASTENER TEST METHODS METHOD 23 TENSILE STRENGTH OF PANEL FASTENERS (Rev 1)

IN-BIS, extensometer

IS 12516 Pt.2-1988

未注明发布机构, extensometer

SAE AMS2355M-2017 TENSILE TESTING OF WROUGHT ALUMINUM AND MAGNESIUM PRODUCTS Except Forgings
DIN EN ISO 527-3 Berichtigung 1:1998 Plastics – Determination of tensile properties – Part 3: Test conditions for films and panels
DIN EN ISO 527-3:1995 Plastics – Determination of tensile properties DIN Part 3: Test conditions for films and panels

ZA-SANS, extensometer

SANS 6892:1998 Metallic materials - Tensile testing at ambient temperature
SANS 6043:2005 Breaking strength in tension of wood adhesive bonds in close-joint and gap-joint test pieces
SANS 1700-5-10:2003 Fasteners Part 5: General requirements and mechanical properties Section 10: Mechanical properties of corrosion-resistant stainless-steel fasteners - Set screws and similar fasteners not under tensile stress

CH-SNV, extensometer

Association of German Mechanical Engineers, extensometer

DVS 2203-1 Beiblatt 2-2014
DVS 2203-1 Beiblatt 1-2009
DVS 2203-1 Beiblatt 1-2005
DVS 2203-1 Beiblatt 2-2009
DVS 2203-1 Beiblatt 1-2010 Testing of welded joints between panels and pipes made of thermoplastics - Requirements in the tensile test - Short-time tensile welding factor fz
DVS 2203-1 Beiblatt 1-2006 Testing of welded joints between panels and pipes made of thermoplastics - Requirements in the tensile test - Short-time tensile welding factor fz
DVS 2203-1 Beiblatt 2-2006 Testing of welded joints between panels and pipes made of thermoplastics - Requirements in the tensile creep test (Tensile creep welding factor fs)
DVS 2203-2-2009
DVS 2203-2-2010 Testing of welded joints between panels and pipes made of thermoplastics - Tensile test
DVS 2203-2 Beiblatt 1-2009
DVS 2203-4-1995
DVS 2203-3-2010
DVS 2203-1 Beiblatt 1-2001
DVS 2203-3-2011 Testing of welded joints between panels and pipes made of thermoplastics - Tensile impact test
DVS 2203-2 Beiblatt 1-2010 Testing of welded joints between panels and pipes made of thermoplastics - Low-temperature tensile test
DVS 2203-1 Beiblatt 2-2001

YU-JUS, extensometer

JUS N.B4.931-1993 Lightning protection-Steel installation elements coated with Zn - Supports for streched conductors over thatched roofs

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, extensometer

GB/T 33157-2016 Thermal insulating products for building applications—Determination of tensile strength parallel to faces

Lithuanian Standards Office , extensometer

LST EN 1465-2009 Adhesives - Determination of tensile lap-shear strength of bonded assemblies
LST ISO 5530-2:2012 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO 5530-2:2012, identical)
LST EN ISO 9163:2005 Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings (ISO 9163:2005)
LST EN 62047-2-2007 Semiconductor devices - Micro-electromechanical devices - Part 2: Tensile testing method of thin film materials (IEC 62047-2:2006)
LST EN ISO 527-3+AC:2001 Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets (ISO 527-3:1995)

International Electrotechnical Commission (IEC), extensometer

IEC 62951-8:2023 Semiconductor devices - Flexible and stretchable semiconductor devices - Part 8: Test method for stretchability, flexibility, and stability of flexible resistive memory
IEC 62951-1:2017 Semiconductor devices - Flexible and stretchable semiconductor devices - Part 1: Bending test method for conductive thin films on flexible substrates
IEC 62047-3:2006 Semiconductor devices - Micro electromechanical devices - Part 3: Thin film standard test piece for tensile-testing

BE-NBN, extensometer

NBN-ISO 8340:1992 Building construction - Jointing products - Sealants - Determination of tensile properties at maintained extension
NBN 266-1953

American National Standards Institute （ANSI), extensometer

ANSI/ASTM B603:2001 Specification for Drawn or Rolled Iron-Chromium-Aluminum Alloys for Electrical Heating Elements
ANSI/ASTM E2573:2012 Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics

Japanese Industrial Standards Committee (JISC), extensometer

JIS R 1606:1995 Testing methods for tensile strength of fine ceramics at room and elevated temperature
JIS Z 2257:2021 Biaxial tensile testing method for sheet metals using a cruciform test piece
JIS K 7161-2:2014 Plastics -- Determination of tensile properties -- Part 2: Test conditions for moulding and extrusion plastics
JIS K 7162:1994 Plastics -- Determination of tensile properties -- Part 2: Test conditions for moulding and extrusion plastics
JIS C 5630-2:2009 Semiconductor devices -- Micro-electromechanical devices-- Part 2: Tensile testing method of thin film materials
JIS K 7152-2:1999 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 2: Small tensile bars
JIS K 6850:1999 Adhesives -- Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
JIS B 1053:1999 Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 5: Set screws and similar threaded fasteners not under tensile stresses

WRC - Welding Research Council, extensometer

BULLETIN 181-1973 EFFECTS OF POROSITY ON THE TENSILE PROPERTIES OF 5083 AND 6061 ALLUMINUM ALLOY WELDMENTS

ESDU - Engineering Sciences Data Unit, extensometer

ESDU 84039 A-1986 Strength of angles and club-foot fittings (transmitting tensile loads)
ESDU 84039 B-2006 Strength of angles and club-foot fittings (transmitting tensile loads).
ESDU 82022-2013 Endurance of steel lugs with clearance-fit pins (Tensile mean stress)
ESDU 82022-1982 Endurance of steel lugs with clearance-fit pins. (Tensile mean stress.)

American Welding Society (AWS), extensometer

WRC 181:1973 Effects of Porosity on the Tensile Properties of 5083 and 6061 Aluminum Alloy Weldments

TR-TSE, extensometer

TS 246-1965 METHOD OF DETERM1NING THE TENSILE STRENGTH, ELONGATION AND COUNT-STRENGTH PRODUCT OF YARN SKENS, BY THE CONSTANT SPEED DYNAMOMETER

VN-TCVN, extensometer

TCVN 7848-2-2015 Wheat flour - Physical characteristics of doughs .Part 2:Determination of rheological properties using an extensograph
TCVN 2019-1977 Methods of Calculating of dimension ralating to cylindrical helical compression(tension)springs made of round steel
TCVN 4501-3-2009 Plastics.Determination of tensile properties Part 3: Test conditions for films and sheets
TCVN 7434-3-2004 Thermoplastics pipes.Determination of tensile properties.Part 3: Polyolefin pipes
TCVN 4501-2-2009 Plastics.Determination of tensile propertie.Part 2: Test conditions for moulding and extrusion plastics
TCVN 4501-2-2014 Plastics - Determination of tensile properties .Part 2:Test conditions for moulding and extrusion plastics
TCVN 2020-1977 Cylindrical helical compression(tension)springs of Ⅰ class and of 1 category made of round steel.Main parameters of coils
TCVN 2021-1977 Cylindrical helical compression(tension)springs of Ⅰ class and of 2 category made of round steel.Main parameters of coils
TCVN 2022-1977 Cylindrical helical compression(tension)springs of Ⅰ class and of 3 category made of round steel.Main parameters of coils
TCVN 2023-1977 Cylindrical helical compression(tension)springs of Ⅰ class and of 4 category made of round steel.Main parameters of coils
TCVN 2024-1977 Cylindrical helical compression(tension)springs of Ⅱ class and of 1 category made of round steel.Main parameters of coils
TCVN 2025-1977 Cylindrical helical compression(tension)springs of Ⅱ class and of 2 category made of round steel.Main parameters of coils
TCVN 4501-5-2009 Plastics.Determination of tensile properties.Part 5: Test conditions for unidirectional fibre-reinforced plastic composites

FI-SFS, extensometer

SFS 2187-1977

ES-UNE, extensometer

UNE-EN ISO 527-3:2019 Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets (ISO 527-3:2018)
UNE-EN 301908-11 V3.2.1:2006 Semiconductor devices - Micro-electromechanical devices -- Part 2: Tensile testing method of thin film materials (IEC 62047-2:2006). (Endorsed by AENOR in January of 2007.)
UNE-EN 62047-2:2006 Semiconductor devices - Micro-electromechanical devices -- Part 2: Tensile testing method of thin film materials (IEC 62047-2:2006). (Endorsed by AENOR in January of 2007.)
UNE-EN 300417-5-1 V1.1.3:2006 Semiconductor devices - Micro-electromechanical devices -- Part 2: Tensile testing method of thin film materials (IEC 62047-2:2006). (Endorsed by AENOR in January of 2007.)
UNE-EN 62047-8:2011 Semiconductor devices - Micro-electromechanical devices - Part 8: Strip bending test method for tensile property measurement of thin films (Endorsed by AENOR in September of 2011.)

IT-UNI, extensometer

GOSTR, extensometer

GOST R ISO 13951-2020 Plastics piping systems. Test method for the resistance of plastic pipe/pipe or pipe/fitting assemblies to tensile loading

VE-FONDONORMA, extensometer

NORVEN 64-4-1967

RO-ASRO, extensometer

STAS 11661-1980 Simple way overhead conveyers with pressed chain ROLLER STRETCHING DEVICES Typification

CEN - European Committee for Standardization, extensometer

EN ISO 527-3:2018 Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets

BELST, extensometer

STB 1459-2004 Spyral cylindrical tension spring made from steel of round section. Construction, basic parameters and dimensions

国家市场监督管理总局、中国国家标准化管理委员会, extensometer

GB/T 17037.2-2020 Plastics—Injection moulding of test specimens of thermoplastic materials—Part 2:Small tensile bars

European Committee for Electrotechnical Standardization（CENELEC）, extensometer

EN 62047-2:2006 Semiconductor devices Micro-electromechanical devices Part 2: Tensile testing method of thin film materials