ZH
RU
ES

The use of extensometers

The use of extensometers, Total:498 items.

In the international standard classification, The use of extensometers involves: Products of the textile industry, Testing of metals, Packaging materials and accessories, Paper and board, Cereals, pulses and derived products, Electric traction equipment, Mechanical testing, Environmental protection, Plastics, Chipless working equipment, Corrosion of metals, Birth control. Mechanical contraceptives, Waxes, bituminous materials and other petroleum products, Construction materials, Surface treatment and coating, Iron and steel products, Rubber and plastics products, Wood-based panels, Conducting materials, Products of non-ferrous metals, Welding, brazing and soldering, Structures of buildings, Measurement of force, weight and pressure, Medical equipment, Adhesives, Materials for aerospace construction, Aerospace fluid systems and components, Materials for the reinforcement of composites, Pipeline components and pipelines, Non-ferrous metals, Paints and varnishes, Analytical chemistry, Protection of and in buildings, Aerospace electric equipment and systems, Linear and angular measurements, Products of the chemical industry, Reinforced plastics, Water quality, Road engineering, Electricity. Magnetism. Electrical and magnetic measurements, Ferrous metals, Measurement of volume, mass, density, viscosity, Construction industry, Laboratory medicine, Radiation measurements, Nuclear energy engineering, Shipbuilding and marine structures in general, Protection against fire, Construction technology, Optics and optical measurements, Tyres, Footwear, Electronic components in general, Construction equipment, Farming and forestry, Clothes, Rubber, Elements of buildings, Cellular materials, Structure and structure elements, Paper products, Storing. Warehousing.

Indonesia Standards, The use of extensometers

SNI 08-6330.2-2000 Test methods for stretch properties of knitted fabrics having low power
SNI 04-3866-1995 Rules for pantographs of electric rolling stocks
SNI 03-6836-2002 Test method of resilient modulus for asphalt mixture by indirect tensile

Japanese Industrial Standards Committee (JISC), The use of extensometers

JIS B 7741:1991 Extensometers used in metallic material tensile testing
JIS Z 2257:2021 Biaxial tensile testing method for sheet metals using a cruciform test piece
JIS H 7505:2004 Method for evaluation of tensile properties of metallic superplastic materials using R-type specimen
JIS T 3264:2007 Extension tubes for enteral feeding for single use
JIS T 3264:2013 Extension tubes for enteral feeding for single use
JIS T 3264:2018 Extension tubes for enteral feeding for single use
JIS K 7107:1987 Testing methods for chemical resistance of plastics under constant tensile deformation

British Standards Institution (BSI), The use of extensometers

BS EN 13891:2004 Tensional strapping - Guide to selection and use of tensional strapping
BS EN 13891:2003 Tensional strapping - Guide to selection and use of tensional strapping
20/30374680 DC BS EN ISO 5530-2. Wheat flour. Physical characteristics of doughs - Part 2. Determination of rheological properties using an extensograph
BS EN ISO 13934-1:2013 Textiles. Tensile properties of fabrics. Determination of maximum force and elongation at maximum force using the strip method
BS ISO 24281:2021 Textiles. Biaxial tensile properties of woven fabric. Determination of maximum force and elongation at maximum force using the grab method
BS EN ISO 9073-3:2023 Tracked Changes. Nonwovens. Test methods. Determination of tensile strength and elongation at break using the strip method
21/30427867 DC BS EN ISO 24281. Textiles. Biaxial tensile properties of woven fabric. Determination of maximum force and elongation at maximum force using the grab method
BS ISO 16842:2014 Metallic materials. Sheet and strip. Biaxial tensile testing method using a cruciform test piece
BS 8571:2014 Method of test for determination of fracture toughness in metallic materials using single edge notched tension (SENT) specimens
BS EN 13589:2008 Bitumen and bituminous binders - Determination of the tensile properties of modified bitumen by the force ductility method
BS EN 13589:2018*BS 2000-520:2018 Bitumen and bituminous binders. Determination of the tensile properties of modified bitumen by the force ductility method
BS EN ISO 7539-4:1995 Corrosion of metals and alloys. Stress corrosion testing. Preparation and use of uniaxially loaded tension specimens
23/30442784 DC BS EN ISO 9073-18. Nonwovens. Test methods - Part 18. Determination of breaking strength and elongation using the grab tensile test
BS ISO 16842:2021 Tracked Changes. Metallic materials. Sheet and strip. Biaxial tensile testing method using a cruciform test piece
BS EN ISO 9073-18:2008 Textiles. Test methods for nonwovens. Determination of breaking strength and elongation of nonwoven materials using the grab tensile test
BS 8571:2018 Tracked Changes. Method of test for determination of fracture toughness in metallic materials using single edge notched tension (SENT) specimens
BS EN ISO 7539-4:1990 Corrosion of metals and alloys - Stress corrosion testing - Preparation and use of uniaxially loaded tension specimens
BS ISO 16241:2005 Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT)
BS EN 1896:2001 Adhesives for paper and board, packaging and disposable sanitary products - Determination of tensile strength and elongation
BS EN ISO 5530-2:2015 Wheat flour. Physical characteristics of doughs. Determination of rheological properties using an extensograph
BS EN 3475-505:2023 Tracked Changes. Aerospace series. Cables, electrical, aircraft use. Test methods. Tensile test on conductors and strands
BS ISO 23228:2011 Thermoplastics pipes for the conveyance of fluids. Determination of the stress-rupture resistance of moulding materials using plain strain grooved tensile (PSGT) specimens
18/30375062 DC BS ISO 11003-2. Adhesives. Determination of shear behaviour of structural adhesives - Part 2. Tensile test method using thick adherends
BS 7334-4:1992 Measuring instruments for building construction. Methods for determining accuracy in use of theodolites
BS EN 591:2001 Instructions for use for in vitro diagnostic instruments for professional use
BS EN ISO 29766:2022 Tracked Changes. Thermal insulating products for building applications. Determination of tensile strength parallel to faces
BS EN ISO 13934-2:2014 Textiles. Tensile properties of fabrics. Determination of maximum force using the grab method
21/30398645 DC BS EN ISO 29766. Thermal insulating products for building applications. Determination of tensile strength parallel to faces
18/30389372 DC BS EN 3475-505. Aerospace series. Cables, electrical, aircraft use. Test methods. Part 505. Tensile test on conductors and strands
BS EN 10270-1:2011 Steel wire for mechanical springs. Patented cold drawn unalloyed spring steel wire
BS EN 10270-1:2001 Steel wire for mechanical springs - Patented cold drawn unalloyed spring steel wire
BS EN 14488-4:2005 Testing sprayed concrete - Bond strength of cores by direct tension
BS EN ISO 10321:2009 Geosynthetics. Tensile test for joints/seams by wide-width strip method
BS EN ISO 10321:2008 Geosynthetics - Tensile test for joints/seams by wide-width strip method
BS EN 10270-1:2011+A1:2017 Steel wire for mechanical springs. Patented cold drawn unalloyed spring steel wire
BS 7334-3:1990 Measuring instruments for building construction. Methods for determining accuracy in use: optical levelling instruments

American National Standards Institute （ANSI), The use of extensometers

ANSI/TAPPI T494 om-2013 Tensile properties of paper and paperboard (using constant rate of elongation apparatus)
ANSI/ASTM F2018:2000 Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
ANSI/ASTM F2928:2013 Practice for Specimens and Testing Conditions for Testing Polyethylene (PE) Pipe Butt Fusions Using Tensile and Hydrostatic Test Methods

International Organization for Standardization (ISO), The use of extensometers

ISO 5530-2:2020 Wheat flour — Physical characteristics of doughs — Part 2: Determination of rheological properties using an extensograph
ISO/FDIS 9073-18:2023 Nonwovens — Test methods — Part 18: Determination of tensile strength and elongation at break using the grab tensile test
ISO 527-1:1993/Amd 1:2005 Plastics - Determination of tensile properties - Part 1: General principles; Amendment 1: Details of extensometer
ISO 5530-2:2012 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph
ISO/TR 29381:2008 Metallic materials - Measurement of mechanical properties by an instrumented indentation test - Indentation tensile properties
ISO/FDIS 9073-3 Nonwovens — Test methods — Part 3: Determination of tensile strength and elongation at break using the strip method
ISO/DIS 9073-18 Nonwovens — Test methods — Part 18: Determination of breaking strength and elongation using the grab tensile test
ISO 13934-1:2013 Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method
ISO 3574:1976 Cold-reduced carbon steel sheet of commercial and drawing qualities
ISO/R 147:1960 Load calibration of testing machines for tensile testing of steel
ISO 16842:2014 Metallic materials - Sheet and strip - Biaxial tensile testing method using a cruciform test piece
ISO 16842:2021 Metallic materials - Sheet and strip - Biaxial tensile testing method using a cruciform test piece
ISO 3573:1976 Hot-rolled carbon steel sheet of commercial and drawing qualities
ISO 3573:2008 Hot-rolled carbon steel sheet of commercial and drawing qualities
ISO 3573:2012 Hot-rolled carbon steel sheet of commercial and drawing qualities
ISO 16241:2005 Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT)
ISO 7539-4:1989 Corrosion of metals and alloys - Stress corrosion testing - Part 4: Preparation and use of uniaxially loaded tension specimens
ISO 29766:2008 Thermal insulating products for building applications - Determination of tensile strength parallel to faces
ISO 10321:2008 Geosynthetics - Tensile test for joints/seams by wide-width strip method
ISO 29766:2022 Thermal insulating products for building applications — Determination of tensile strength parallel to faces
ISO 24281:2021 Textiles - Biaxial tensile properties of woven fabric - Determination of maximum force and elongation at maximum force using the grab method
ISO 5950:1979 Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities
ISO 8322-7:1991 Building construction; measuring instruments; procedures for determining accuracy in use; part 7: instruments when used for setting out
ISO 14934-4:2014 Fire tests - Calibration and use of heat flux meters - Part 4: Guidance on the use of heat flux meters in fire tests
ISO 14272:2000 Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds
ISO 6043:1985 Shipbuilding and marine structures; Eye and fork assemblies under tension load; Main dimensions
ISO 4999:1978 Continuous hot-dip terne (lead alloy) coated cold reduced carbon steel sheet of commercial and drawing qualities
ISO 6259-1:2015 Thermoplastics pipes - Determination of tensile properties - Part 1: General test method

German Institute for Standardization, The use of extensometers

DIN EN ISO 5530-2:2020-06 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO/DIS 5530-2:2020); German and English version prEN ISO 5530-2:2020 / Note: Date of issue 2020-05-08*Intended as replacement for...
DIN EN ISO 5530-2:2015-03 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO 5530-2:2012); German version EN ISO 5530-2:2014 / Note: To be replaced by DIN EN ISO 5530-2 (2020-06).
DIN EN ISO 5530-2:2020 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO/DIS 5530-2:2020); German and English version prEN ISO 5530-2:2020
DIN 51214:2009-08 Testing of Steel - Tensile test for round wires using knotted specimens
DIN EN ISO 13934-1:2013-08 Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:2013); German version EN ISO 13934-1:2013
DIN EN ISO 5530-2:2015 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO 5530-2:2012); German version EN ISO 5530-2:2014
DIN EN ISO 13934-2:2014-06 Textiles - Tensile properties of fabrics - Part 2: Determination of maximum force using the grab method (ISO 13934-2:2014); German version EN ISO 13934-2:2014
DIN EN ISO 9073-3:2022-06 Nonwovens - Test methods - Part 3: Determination of tensile strength and elongation at break using the strip method (ISO/DIS 9073-3:2022); German and English version prEN ISO 9073-3:2022 / Note: Date of issue 2022-05-20*Intended as replacement for DIN ...
DIN EN ISO 9073-18:2023-02 Nonwovens - Test methods - Part 18: Determination of breaking strength and elongation using the grab tensile test (ISO/DIS 9073-18:2023); German and English version prEN ISO 9073-18:2023 / Note: Date of issue 2023-01-13*Intended as replacement for DIN ...
DIN EN ISO 13934-2:2014 Textiles - Tensile properties of fabrics - Part 2: Determination of maximum force using the grab method (ISO 13934-2:2014); German version EN ISO 13934-2:2014
DIN EN ISO 9073-18:2008-08 Textiles - Test methods for nonwovens - Part 18: Determination of breaking strength and elongation of nonwoven materials using the grab tensile test (ISO 9073-18:2007); German version EN ISO 9073-18:2008 / Note: To be replaced by DIN EN ISO 9073-18 (20...
DIN 53835-3:1981 Testing of textiles; determination of the elastic behaviour of single and plied yarns by a single application of tensile load between constant extension limits
DIN 53835-2:1981 Testing of textiles; determination of the elastic behaviour of single and plied elastomeric yarns by repeated application of tensile load between constant extension limits
DIN EN ISO 9073-18:2023 Nonwovens - Test methods - Part 18: Determination of breaking strength and elongation using the grab tensile test (ISO/DIS 9073-18:2023); German and English version prEN ISO 9073-18:2023
DIN EN ISO 2062:2010-04 Textiles - Yarns from packages - Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester (ISO 2062:2009); German version EN ISO 2062:2009
DIN 53835-1:1987 Testing of textiles; tensile test for testing the elastic behaviour; principles
DIN EN 1896:2001 Adhesives for paper and board, packaging and disposable sanitary products - Determination of tensile strength and elongation; German version EN 1896:2001
DIN EN ISO 10321:2008 Geosynthetics - Tensile test for joints/seams by wide-width strip method (ISO 10321:2008); German version EN ISO 10321:2008
DIN EN 14932:2018-03 Plastics - Thermoplastic stretch films for wrapping silage bales; German version EN 14932:2018
DIN EN 1607:2013-05 Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces; German version EN 1607:2013
DIN EN 14932:2018 Plastics - Thermoplastic stretch films for wrapping silage bales
DIN 48085-2:1985-04 Compression connectors, restistant to high tensile stresses, for aluminium-conductors / Note: To be replaced by DIN VDE 0212-485 (2022-08).
DIN EN ISO 29766:2023-02 Thermal insulating products for building applications - Determination of tensile strength parallel to faces (ISO 29766:2022); German version EN ISO 29766:2022
DIN EN ISO 9073-3:2023-09 Nonwovens - Test methods - Part 3: Determination of tensile strength and elongation at break using the strip method (ISO 9073-3:2023); German version EN ISO 9073-3:2023
DIN EN ISO 13935-2:2014 Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of maximum force to seam rupture using the grab method (ISO 13935-2:2014); German version EN ISO 13935-2:2014
DIN EN ISO 13935-2:1999 Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of maximum force to seam rupture using the grab method (ISO 13935-2:1999); German version EN ISO 13935-2:1999
DIN 53835-1:1987-01 Testing of textiles; tensile test for testing the elastic behaviour; principles
DIN EN ISO 13935-2:2014-07 Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of maximum force to seam rupture using the grab method (ISO 13935-2:2014); German version EN ISO 13935-2:2014
DIN EN ISO 13935-1:2014-07 Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 1: Determination of maximum force to seam rupture using the strip method (ISO 13935-1:2014); German version EN ISO 13935-1:2014
DIN EN ISO 7539-4:1995-08 Corrosion of metals and alloys - Stress corrosion testing - Part 4: Preparation and use of uniaxially loaded tension specimens (ISO 7539-4:1989); German version EN ISO 7539-4:1995
DIN EN ISO 13934-1:2013 Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:2013); German version EN ISO 13934-1:2013
DIN 54514:2008 Testing of paper and board - Determination of the initial wet web strength by tensile test
DIN EN 1896:2001-04 Adhesives for paper and board, packaging and disposable sanitary products - Determination of tensile strength and elongation; German version EN 1896:2001
DIN 50002-1:2020-03 Adhesive bondings in electronic applications - Bonding strength on surfaces - Part 1: Tensile test
DIN ISO 2285:2010 Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load (ISO 2285:2007)
DIN EN ISO 9513:2013-05 Metallic materials - Calibration of extensometer systems used in uniaxial testing (ISO 9513:2012 + Cor. 1:2013); German version EN ISO 9513:2012
DIN 28058-1:1987-11 Lead used in apparatus engineering; homogeneous lead lining

ES-AENOR, The use of extensometers

Danish Standards Foundation, The use of extensometers

DS/ISO 5530-2:2012 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph
DS/EN ISO 13934-1:2013 Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method
DS/EN 13587:2010 Bitumen and bituminous binders - Determination of the tensile properties of bituminous binders by the tensile test method
DS/EN ISO 13934-2:1999 Textiles - Tensile properties of fabrics - Part 2: Determination of maximum force using the grab method
DS/EN ISO 2062:2010 Textiles - Yarns from packages - Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester
DS/EN ISO 9073-18:2008 Textiles - Test methods for nonwovens - Part 18: Determination of breaking strength and elongation of nonwoven materials using the grab tensile test
DS/EN ISO 7539-4:1995 Corrosion of metals and alloys - Stress corrosion testing - Part 4: Preparation and use of uniaxially loaded tension specimens
DS/EN 1896:2001 Adhesives for paper and board, packaging and disposable sanitary products - Determination of tensile strength and elongation
DS/EN 3475-505:2012 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 505: Tensile test on conductors and strands
DS 438.15:1984 Test method for the structural use of brickwork. Determination of the tensile strength in bending of brickwork
DS/EN ISO 13935-1:1999 Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 1: Determination of maximum force to seam rupture using the strip method
DS/EN ISO 13935-2:1999 Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of maximum force to seam rupture using the grab method
DS/EN 12311-1:2000 Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of tensile properties
DS/EN ISO 9513:2013 Metallic materials - Calibration of extensometer systems used in uniaxial testing

VN-TCVN, The use of extensometers

TCVN 7848-2-2015 Wheat flour - Physical characteristics of doughs .Part 2:Determination of rheological properties using an extensograph

Association Francaise de Normalisation, The use of extensometers

NF V03-717-2*NF EN ISO 5530-2:2015 Wheat flour - Physical characteristics of doughs - Part 2 : determination of rheological properties using a extensograph
NF EN ISO 5530-2:2015 Farines de blé tendre - Caractéristiques physiques des pâtes - Partie 2 : détermination des caractéristiques rhéologiques au moyen de l'extensographe
NF EN 13587:2017 Bitumes et liants bitumineux - Détermination des caractéristiques de traction des liants bitumineux par la méthode d'essai de traction
NF R15-515:1995 Road vehicules. Apparatus for belt measurement and tensioning. Test method.
NF P84-501:1992 Géomembranes - Dispositif d'étanchéité par géomembranes (DEG) - Détermination des caractéristiques en traction
NF T54-196-2:1998 Plastiques - Films étirables - Partie 2 : détermination de l'aptitude à l'emploi des films étirables pour banderolage hélicoïdal.
NF T66-038*NF EN 13587:2017 Bitumen and bituminous binders - Determination of the tensile properties of bituminous binders by the tensile test method
NF EN ISO 22776:2005 Chaussures - Méthodes d'essai pour accessoires : fermetures auto-agrippantes - Résistance à la traction avant et après un usage répété
NF G30-104-1:1994 Textiles. Flat extensible medical bandages. Part 1 : tensile strength for a specified extension
NF G07-129-1*NF EN ISO 13934-1:2013 Textiles - Tensile properties of fabrics - Part 1 : determination of maximum force and elongation at maximum force using the strip method
NF T66-006:2008 Bitumen and bituminous binders - Determination of the tensile properties of modified bitumen by the force ductility method.
NF EN ISO 2062:2010 Textiles - Fils sur enroulements - Détermination de la force de rupture et de l'allongement à la rupture des fils individuels à l'aide d'un appareil d'essai à vitesse constante d'allongement
NF B51-018:1988 Wood. Tensile parallel to grain. Determination of modulus of elasticity in tensile parallel to grain using small clear specimens.
NF B51-017:1988 Wood. Tensile parallel to grain. Determination of ultimate tensile stress parallel to grain using small clear specimens.
NF EN 13589:2018 Bitumes et liants bitumineux - Détermination des caractéristiques de traction des bitumes modifiés par la méthode de force ductilité
NF A03-003:1994 Metallic materials. Tensile test. Part 3 : calibration of force proving instruments used for the verification of uniaxial testing machines.
NF P18-511-4/IN1*NF EN 14488-4/IN1:2008 Testing sprayed concrete - Part 4 : bond strength of cores by direct tension
NF A05-501-4*NF EN ISO 7539-4:1995 Corrosion of metals and alloys. Stress corrosion testing. Part 4 : preparation and use of uniaxially loaded tension specimens.
NF G30-104-2:1994 Textiles. Flat extensible medical bandages. Part 2 : tensile strength after accelerated ageing
NF EN 1896:2001 Adhésifs pour papier et carton, emballage et produits sanitaires jetables - Détermination de la résistance à la traction et de l'allongement
NF EN ISO 29766:2022 Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la résistance à la traction parallèlement aux faces
NF EN 1607:2013 Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la résistance à la traction perpendiculairement aux faces
NF G38-116*NF EN ISO 10321:2008 Geosynthetics - Tensile test for joints/seams by wide-width strip method
NF H02-011*NF EN 13247:2001 Packaging - Specification for tensional steel strapping for lifting, lashing and securing of loads
NF T54-424*NF EN 14932:2018 Plastics - Thermoplastic stretch films for wrapping silage bales
NF EN ISO 13934-1:2013 Textiles - Propriétés des étoffes en traction - Partie 1 : détermination de la force maximale et de l'allongement à la force maximale par la méthode sur bande
NF L17-956:1995 Aircraft industry. Synthetic cloths for the fabric of airplane structures. Determination of the load and elongation at rupture by tensile testing of cloths in delivery condition and of free coated cloths.
NF U12-040:1990 TYRES FOR ARGRICULTURAL TRACTORS AND MACHINES. INSTRUCTIONS FOR USE OF TYRES FOR AGRICULTURAL TRACTORS AND MACHINES.
NF E11-200:1986 Length measuring instruments in use. Maintenance and downgrading. General rules.
NF ISO 7700-1:2009 Produits alimentaires - Vérification des humidimètres en service - Partie 1 : humidimètres pour céréales
NF EN ISO 6259-1:2015 Tubes en matières thermoplastiques - Détermination des caractéristiques en traction - Partie 1 : méthode générale d'essai
NF Q34-015:1985 Sanitary and domestic articles. Napkins, all-in-one nappies, sanitary towels and similar disposable. Determination of tensile strength and wet test of elongation of nonwowen protectives tissus.

Professional Standard - Military and Civilian Products, The use of extensometers

WJ 744-1994 Test method for tensile strength of adhesives for optical instruments

American Society for Testing and Materials (ASTM), The use of extensometers

ASTM D4649-03(2016) Standard Guide for Selection and Use of Stretch Wrap Films
ASTM D828-22 Standard Test Method for Tensile Properties of Paper and Paperboard Using Constant-Rate-of-Elongation Apparatus
ASTM G49-85(2005) Standard Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens
ASTM D4649-03 Standard Guide for Selection and Use of Stretch Wrap Films
ASTM D4649-03(2009) Standard Guide for Selection and Use of Stretch Wrap Films
ASTM D4964-96(2008)e1 Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine)
ASTM D828-16 Standard Test Method for Tensile Properties of Paper and Paperboard Using Constant-Rate-of-Elongation Apparatus
ASTM D828-16e1 Standard Test Method for Tensile Properties of Paper and Paperboard Using Constant-Rate-of-Elongation Apparatus
ASTM D1708-96 Standard Test Method for Tensile Properties of Plastics By Use of Microtensile Specimens
ASTM D1708-02a Standard Test Method for Tensile Properties of Plastics By Use of Microtensile Specimens
ASTM D1708-18 Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
ASTM D2256/D2256M-10(2015) Standard Test Method for Tensile Properties of Yarns by the Single-Strand Method
ASTM D1708-06 Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
ASTM D1708-06a Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
ASTM G49-85(2000) Standard Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens
ASTM G49-85(2011) Standard Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens
ASTM G49-85(2019) Standard Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens
ASTM D4595-11 Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method
ASTM F1664-95 Standard Specification for Poly(Vinyl Chloride) (PVC)-Coated Steel Tension Wire Used with Chain-Link Fence
ASTM F1664-01 Standard Specification for Poly(Vinyl Chloride) (PVC)-Coated Steel Tension Wire Used with Chain-Link Fence
ASTM D5083-17 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
ASTM F2018-00(2006) Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
ASTM F2018-00e1 Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
ASTM F2018-00 Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
ASTM D6637-01(2009) Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method
ASTM D6637/D6637M-15 Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method
ASTM B49-98(2004) Standard Specification for Copper Rod Drawing Stock for Electrical Purposes
ASTM D4649-20 Standard Guide for Use of Stretch Films and Wrapping Application
ASTM B233-97(2021) Standard Specification for Aluminum 1350 Drawing Stock for Electrical Purposes
ASTM B233-97(2016) Standard Specification for Aluminum 1350 Drawing Stock for Electrical Purposes
ASTM D3826-18 Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test
ASTM D7234-19 Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
ASTM C1860-22 Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM C1851-18 Standard Practice for Determining the Extent of Cracking in a Sealant using the Difference between the Compressive and Tensile Modulus
ASTM D76/D76M-11 Standard Specification for Tensile Testing Machines for Textiles
ASTM D7556-10(2019) Standard Test Methods for Determining Small-Strain Tensile Properties of Geogrids and Geotextiles by In-Air Cyclic Tension Tests
ASTM A770/A770M-03(2012) Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications
ASTM A770/A770M-86(2001) Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications
ASTM A770/A770M-03 Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications
ASTM A770/A770M-86(1996) Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications
ASTM A770/A770M-03(2018) Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications
ASTM A770/A770M-03(2012)e1 Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications
ASTM F2634-15 Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method
ASTM D4541-22 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
ASTM A1043/A1043M-18 Standard Specification for Structural Steel with Low Yield to Tensile Ratio for Use in Buildings
ASTM F2516-07 Standard Test Method for Tension Testing of Nickel-Titanium Superelastic Materials
ASTM D2256-02(2008) Standard Test Method for Tensile Properties of Yarns by the Single-Strand Method
ASTM D3107-07 Standard Test Methods for Stretch Properties of Fabrics Woven from Stretch Yarns
ASTM D2256/D2256M-21 Standard Test Method for Tensile Properties of Yarns by the Single-Strand Method
ASTM F1093-99 Standard Test Methods for Tensile Strength Characteristics of Oil Spill Response Boom
ASTM D7275-07 Standard Test Method for Tensile Properties of Bituminous Geomembranes (BGM)
ASTM D6931-07 Standard Test Method for Indirect Tensile (IDT) Strength of Bituminous Mixtures
ASTM D6931-12 Standard Test Method for Indirect Tensile (IDT) Strength of Bituminous Mixtures
ASTM F1093-99(2018) Standard Test Methods for Tensile Strength Characteristics of Oil Spill Response Boom
ASTM F2928-13 Standard Practice for Specimens and Testing Conditions for Testing Polyethylene (PE) Pipe Butt Fusions Using Tensile and Hydrostatic Test Methods
ASTM E2408-04 Standard Test Method for Relative Extensional Viscosity of Agricultural Spray Tank Mixes
ASTM E2408-04(2009) Standard Test Method for Relative Extensional Viscosity of Agricultural Spray Tank Mixes
ASTM E2408-04(2015) Standard Test Method for Relative Extensional Viscosity of Agricultural Spray Tank Mixes
ASTM D4649-00 Standard Guide for Selection and Use of Stretch Wrap Films
ASTM F1664-08(2018) Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Tension Wire Used with Chain-Link Fence
ASTM D4595-05 Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method
ASTM D4595-86(1994) Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method
ASTM D5083-10 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
ASTM E2529-06 Standard Guide for Testing the Resolution of a Raman Spectrometer
ASTM E2529-06(2014) Standard Guide for Testing the Resolution of a Raman Spectrometer
ASTM E1840-96(2022) Standard Guide for Raman Shift Standards for Spectrometer Calibration
ASTM F609-05 Standard Test Method for Using a Horizontal Pull Slipmeter (HPS)
ASTM F1467-18 Standard Guide for Use of an X-Ray Tester (≈10 keV Photons) in Ionizing Radiation Effects Testing of Semiconductor Devices and Microcircuits
ASTM D7998-15 Standard Test Method for Measuring the Effect of Temperature on the Cohesive Strength Development of Adhesives using Lap Shear Bonds under Tensile Loading
ASTM B598-09 Standard Practice for Determining Offset Yield Strength in Tension for Copper Alloys
ASTM D4885-01 Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method
ASTM D4595/D4595M-23 Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Method
ASTM D4885-01(2023) Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method
ASTM D4885-01(2018) Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method
ASTM D6084-97 Standard Test Method for Elastic Recovery of bituminuous Materials by Ductilometer
ASTM D6084/D6084M-21 Standard Test Method for Elastic Recovery of Asphalt Materials by Ductilometer
ASTM E1840-96(2002) Standard Guide for Raman Shift Standards for Spectrometer Calibration
ASTM C1860-19a Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM C1860-21 Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM C1860-19 Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM C1860-23 Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM C1860-18 Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM C1860-20 Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM C1860-23a Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM D2095-96(2015) Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens
ASTM D5083-10e1 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
ASTM D5083-02 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
ASTM D5083-96 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
ASTM D5083-08 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
ASTM D1708-10 Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
ASTM F609-96e1 Standard Test Method for Using a Horizontal Pull Slipmeter (HPS)
ASTM F609-96 Standard Test Method for Using a Horizontal Pull Slipmeter (HPS)
ASTM D3552-96e1 Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites
ASTM D3552-96(2007) Standard Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites
ASTM D4885-01(2006) Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method
ASTM D4885-88(1995) Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method
ASTM D4885-01(2011) Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method
ASTM D4595-09 Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method
ASTM C1583/C1583M-04e1 Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method)
ASTM D5331-03(2016) Standard Test Method for Evaluation of Mechanical Handling of Unitized Loads Secured with Stretch Wrap Films

Korean Agency for Technology and Standards (KATS), The use of extensometers

KS K 0352-2019 Test method for stretch properties of stretch woven fabrics
KS B 5518-2002(2017) Extensometers used in metallic material tensile testing
KS K 0521-2017 Textiles－Tensile properties of fabrics－Determination of maximum force and elongation at maximum force using the strip method
KS B 0950-2009(2019) Metallic materials－Instrumented indentation test for indentation tensile properties
KS B 0801-2007(2017) Test pieces for tensile test for metallic materials
KS F 2376-2014(2019) Standard test method for determining the resilient modulus of asphalt mixtures using indirect tensile mode
KS F 2376-2014 Standard test method for determining the resilient modulus of asphalt mixtures using indirect tensile mode
KS K ISO 2062:2019 Textiles — Yarns from packages — Determination of single-end breaking force and elongation at break using constant rate of extension(CRE) tester
KS C 1221-1989(2009) Polygraphs for clinical use
KS K 0419-2019 Test method for crimp recovery of stretch filament yarn
KS D ISO 7539-4:2003 Corrosion of metals and alloys－Stress corrosion testing－Part 4：Preparation and use of uniaxially loaded tension specimens
KS D ISO 7539-4:2018 Corrosion of metals and alloys－Stress corrosion testing－Part 4：Preparation and use of uniaxially loaded tension specimens
KS M ISO 11003-2:2020 Adhesives — Determination of shear behaviour of structural adhesives — Part 2: Tensile test method using thick adherends
KS M ISO 11003-2:2010 Adhesives－Determination of shear behaviour of structural adhesives－Part 2：Tensile test method using thick adherends
KS K 0520-2021 Textiles — Tensile properties of fabrics — Determination of maximum force and elongation at maximum force using the grab method
KS M ISO 6259-1:2008 Thermoplastics pipes-Determination of tensile properties-Part 1:General test method
KS M ISO 6259-1:2016 Thermoplastics pipes－Determination of tensile properties－Part 1：General test method
KS C IEC 60476:2009 Nuclear instrumentation－Electrical measuring systems and instruments utilizing ionizing radiation sources－General aspects
KS K ISO 13935-1:2009 Textiles-Seam tensile properties of fabrics and made-up textile articles-Part 1:Determination of maximum force to seam rupture using the strip method
KS K ISO 13935-1:2015 Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 1: Determination of maximum force to seam rupture using the strip method
KS M ISO 6259-1-2016(2021) Thermoplastics pipes－Determination of tensile properties－Part 1：General test method

AENOR, The use of extensometers

UNE-EN ISO 5530-2:2015 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO 5530-2:2012)
UNE-EN 13587:2017 Bitumen and bituminous binders - Determination of the tensile properties of bituminous binders by the tensile test method
UNE-EN ISO 13934-1:2013 Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:2013)
UNE-EN ISO 13934-2:2014 Textiles - Tensile properties of fabrics - Part 2: Determination of maximum force using the grab method (ISO 13934-2:2014)
UNE-EN ISO 2062:2010 Textiles - Yarns from packages - Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester (ISO 2062:2009)
UNE-EN ISO 9073-18:2008 Textiles - Test methods for nonwovens - Part 18: Determination of breaking strength and elongation of nonwoven materials using the grab tensile test (ISO 9073-18:2007)
UNE-EN 1896:2001 ADHESIVES FOR PAPPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS . DETERMINATION OF TENSILE STRENGTH AND ELONGATION.
UNE 82502:2007 Instruments intended to measure braking forces in service motor vehicles: Roller brake meters.
UNE 25003:1978 DRAW HOOK COUPLING FOR RAILBOUND VEHICLES OF SPANISH NORMAL WIDTH. MINIMUM TENSILE STRENGTH, 85 T.
UNE-EN ISO 7539-4:1996 CORROSION OF METALS AND ALLOYS. STRESS CORROSION TESTING. PART 4: PREPARATION AND USE OF UNIAXIALLY LOADED TENSION SPECIMENS. (ISO 7539-4:1989)
UNE-EN 12311-1:2000 Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of tensile properties

SE-SIS, The use of extensometers

SIS 11 26 59-1970 Tensile test for round wire using knotted specimens
SIS MNC 915-1991 Steels for cold rolled sheet for lock-forming and drawing — Summary
SIS SS IEC 250:1982 Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths
SIS SS IEC 248:1988 Nuclear instrumen ta tion — Dimensions of planchets usedin nuclear electronic instruments
SIS 11 21 16 E-1963 Dragprovstavar typ F
SIS SS 11 21 13-1986 Metallic materials — Tensile test pieces for screwed holders — Round test pieces type C
SIS SS 11 01 19-1985 Alloy steels and non-alloy and alloy steels intended for heat-treatment - Sampling for tens i le testing

IN-BIS, The use of extensometers

European Committee for Standardization (CEN), The use of extensometers

FprEN ISO 5530-2 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO/FDIS 5530-2:2021)
EN 10002-4:1994 Metallic Materials - Tensile Test - Part 4: Verification of Extensometers Used in Uniaxial Testing
EN 10002-3:1994 Metallic Materials - Tensile Test - Part 3: Calibration of Force Proving Instruments Used for the Verification of Uniaxial Testing Machines
EN ISO 9073-3:2023 Nonwovens - Test methods - Part 3: Determination of tensile strength and elongation at break using the strip method (ISO 9073-3:2023)
FprEN ISO 9073-3 Nonwovens - Test methods - Part 3: Determination of tensile strength and elongation at break using the strip method (ISO/FDIS 9073-3:2023)
prEN ISO 9073-18 Nonwovens - Test methods - Part 18: Determination of breaking strength and elongation using the grab tensile test (ISO/DIS 9073-18:2023)
EN ISO 5530-2:2014 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph
EN 1896:2001 Adhesives for paper and board, packaging and disposable sanitary products - Determination of tensile strength and elongation
EN 591:2001 Instructions for Use for In Vitro Diagnostic Instruments for Professional Use
EN 591:1994 In Vitro Diagnostic Systems - Requirements for User Manuals for In Vitro Diagnostic Instruments for Professional Use
EN ISO 29766:2022 Thermal insulating products for building applications - Determination of tensile strength parallel to faces (ISO 29766:2022)
EN ISO 10321:2008 Geosynthetics - Tensile test for joints/seams by wide-width strip method (ISO 10321:2008)
EN ISO 7539-4:1995 Corrosion of Metals and Alloys - Stress Corrosion Testing - Part 4: Preparation and Use of Uniaxially Loaded Tension Specimens (ISO 7539-4: 1989)

(U.S.) Ford Automotive Standards, The use of extensometers

FORD WSS-M99D68-A1-2013 THERMOPLASTIC PROPERTY DETERMINATION FOR CAE, HIGH STRAIN RATE TENSILE, CREEP AND TENSILE MODULUS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSF-M1L109-A2-2010 THERMOCOUPLE WIRE, NEGATIVE (ALUMEL), EXTENSION ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M1A138-A-2002 STEEL WIRE, HARD DRAWN LOW TENSILE QUALITY ***TO BE USED WITH FORD WSS-M99P1111-A***

CH-SNV, The use of extensometers

SNV 95821-1948

Lithuanian Standards Office , The use of extensometers

LST ISO 5530-2:2012 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO 5530-2:2012, identical)
LST EN 13587-2010 Bitumen and bituminous binders - Determination of the tensile properties of bituminous binders by the tensile test method
LST EN ISO 13934-1:2000 Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:1999)
LST EN ISO 13934-2:2000 Textiles - Tensile properties of fabrics - Part 2: Determination of maximum force using the grab method (ISO 13934-2:1999)
LST EN ISO 2062:2010 Textiles - Yarns from packages - Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester (ISO 2062:2009)
LST EN 1896-2002 Adhesives for paper and board, packaging and disposable sanitary products - Determination of tensile strength and elongation
LST EN ISO 9073-18:2008 Textiles - Test methods for nonwovens - Part 18: Determination of breaking strength and elongation of nonwoven materials using the grab tensile test (ISO 9073-18:2007)
LST EN 3475-505-2012 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 505: Tensile test on conductors and strands
LST EN ISO 5530-2:2015 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO 5530-2:2012)
LST EN ISO 7539-4:2001 Corrosion of metals and alloys - Stress corrosion testing - Part 4: Preparation and use of uniaxially loaded tension specimens (ISO 7539-4:1989)
LST EN 12311-1-2001 Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of tensile properties

Standard Association of Australia （SAA）, The use of extensometers

AS 4828.2:2008 Degradability of plastics - Methods of test - Determination of brittle point in plastic film using a tensile elongation test
AS 2001.2.3.1:2001 Methods of test for textiles - Physical tests - Determination of maximum force and elongation at maximum force using the strip method
AS 2162.2:1998 Verification and use of volumetric apparatus - Guide to the use of piston-operated volumetric apparatus (POVA)
AS 2054:1977 Spirit levels for use in precision engineering

GM Holden Ltd, The use of extensometers

HOLDEN HN 0290-2012 Test for Elongation and Stretch Set of Automotive Fabrics Do Not Use on New Programs, No Replacement. Limited for current use

BE-NBN, The use of extensometers

NBN 266-1953

CZ-CSN, The use of extensometers

CSN 22 7523-1975 Sintered carbide drawing dies for dry drawing of steel wires with strength above 1 100 mpa (1100 N/mm-2). Dimensions
CSN 22 7330-1962 Progressive drawing dies forround drawn products.Design rules
CSN 42 0329-1964 Cylindrical test pieces for tensile testing of grey cast iron
CSN 42 0336-1982 Copper-base alloy casting. Test samples and test pieces for tensile test
CSN 79 3820-1977 Testiug of leathers and furs. Tensile strength, elongation by specified load and elongation of break of leathers and furs
CSN 42 0314-1980 Metal testing. Test pieces of circular cross-section with heads for holding rings for tensile testing of metals
CSN 42 0316-1980 Metal testing. Test pieces circular cross-section with screwed gripped heads for the tensile testing of metals
CSN 42 0315-1980 Metal testing. Test pieces of circular cross-section with cylindrical gripped heads for tensile testing of metals
CSN 42 0317-1980 Metal testing. Test pieces of circular cross-section with upset gripped heads for tensile testing of metals
CSN 42 0331-1985 Metal testing. Test pieces of circular cross-section with cylindrical gripped heads for tensile testing of malleable cast iron

RO-ASRO, The use of extensometers

STAS SR ISO 8009-5:1996 Reusable rubber contraceptive diaphragms - Part 5: Determination of tensile properties
STAS SR ISO 7539-4:1993 Corrosion of metals and alloys. Stress corrosion testing. Part 4: Preparation and use of uniaxially loaded tension specimens
STAS 9538/4-1974 PAPER FOR CHROMATOGRAPHY AND ELECTROPHORESIS Determation of wet tensile breaking strength
STAS 1369-1990 Cotton and drawn polyesteric filament yarns thread for leather garments
STAS 10159-1975 Machine retaining devices EYE BOLT FOR TENSIONING DRAW SPRINGS Dimensions
STAS 6605-1978 Tests of metals TENSILE TESTING OF REINFORCED STEEL, WIRE AND WIRE PRODUCTS FOR PRESTRESSED CONCRETE
STAS SR ISO 8322-7:1995 Building construction - Measuring instruments- Procedures for determining accuracy in use. Part 7: Instruments when use for setting out
STAS SR ISO 6043:1995 Shipbuilding and marine structures - Eye and fork assemblies under tension load - Main dimensions

SAE - SAE International, The use of extensometers

SAE AMS3892/12A-2016 Tow@ Carbon Fiber For Structural Composites 730 (5033) Tensile Strength@ 41 (283) Tensile Modulus
SAE AMS3892/11B-2016 Tow@ Carbon Fiber For Structural Composites 450 (3103) Tensile Strength@ 32 (221) Tensile Modulus
SAE AMS3892/9C-2016 Tow@ Carbon Fiber for Structural Composites 500 (3447) Tensile Strength@ 32 (221) Tensile Modulus
SAE AMS3892/10B-2016 Tow@ Carbon Fiber For Structural Composites 550 (3792) Tensile Strength@ 38 (262) Tensile Modulus
SAE AMS3892/2C-2016 Tow or Yarn@ Carbon Fibers For Structural Composites GF 300 (2068) Tensile Strength@ 50 (345) Tensile Modulus
SAE AMS3892/4C-2016 Tow or Yarn@ Carbon Fibers For Structural Composites GF 300 (2068) Tensile Strength@ 75 (517) Tensile Modulus
SAE AMS3892/6B-2016 Tow or Yarn@ Carbon Fibers For Structural Composites GF 325 (2241) Tensile Strength@ 57 (393) Tensile Modulus
SAE AMS3892/5C-2016 Tow or Yarn@ Carbon Fibers For Structural Composites GF 220 (1517) Tensile Strength@ 75 (517) Tensile Modulus
SAE AMS3892/3C-2016 Tow or Yarn@ Carbon Fibers For Structural Composites GF 400 (2758) Tensile Strength@ 40 (276) Tensile Modulus
SAE AMS3892/1C-2016 Tow or Yarn@ Carbon Fibers For Structural Composites GF 400 (2758) Tensile Strength@ 33 (228) Tensile Modulus
SAE AMS3892/7B-2016 Tow or Yarn@ Carbon Fibers For Structural Composites GF (0X) 400 (2758) Tensile Strength@ 33 (228) Tensile Modulus
SAE AMS3892/8B-2016 Tow or Yarn@ Carbon Fibers For Structural Composites GF (0X) 400 (2758) Tensile Strength@ 40 (276) Tensile Modulus
SAE AMS3278B-2016 Sealing and Coating Compound: Polyurethane (PUR) Fuel Resistant High Tensile Strength / Elongation For Integral Fuel Tanks / Fuel Cavities / General Purpose

Society of Automotive Engineers (SAE), The use of extensometers

SAE AMS3892/11-1988 TOW, CARBON FIBER For Structural Composites 450 (3100) Tensile Strength, 32,000,000 (221) Tensile Modulus
SAE AMS3892/9B-2005 Tow, Carbon Fiber For Structural Composites 500 (3447) Tensile Strength, 32 (221) Tensile Modulus
SAE AMS3892/10A-2005 Tow, Carbon Fiber For Structural Composites 550 (3792) Tensile Strength, 38 (262) Tensile Modulus
SAE AMS3892/11A-2005 Tow, Carbon Fiber For Structural Composites 450 (3103) Tensile Strength, 32 (221) Tensile Modulus
SAE AMS3892/5-1973 GRAPHITE FIBERS For Structural Composites GF 220 (1517) Tensile Strength, 70,000,000 (483) Tensile Modulus
SAE AMS3892/12-2005 Tow, Carbon Fiber For Structural Composites 730 (5033) Tensile Strength, 41 (283) Tensile Modulus
SAE AMS3892/1-1972 TOW, GRAPHITE FIBERS For Structural Composites GT 350 (2413) Tensile Strength, 30,000,000 (207) Tensile Modulus
SAE AMS3892/2-1972 TOW, GRAPHITE FIBERS For Structural Composites GT 300 (2069) Tensile Strength, 50,000,000 (345) Tensile Modulus
SAE AMS3892/3-1972 TOW, GRAPHITE FIBERS For Structural Composites GT 350 (2413) Tensile Strength, 38,000,000 (262) Tensile Modulus
SAE AMS3892/3B-2005 Tow or Yarn, Carbon Fibers For Structural Composites GF 400 (2758) Tensile Strength, 40 (276) Tensile Modulus
SAE AMS3892/4B-2005 Tow or Yarn, Carbon Fibers For Structural Composites GF 300 (2068) Tensile Strength, 75 (517) Tensile Modulus
SAE AMS3892/2B-2005 Tow or Yarn, Carbon Fibers For Structural Composites GF 300 (2068) Tensile Strength, 50 (345) Tensile Modulus
SAE AMS3892/1B-2005 Tow or Yarn, Carbon Fibers For Structural Composites GF 400 (2758) Tensile Strength, 33 (228) Tensile Modulus
SAE AMS3892/5B-2005 Tow or Yarn, Carbon Fibers For Structural Composites GF 220 (1517) Tensile Strength, 75 (517) Tensile Modulus
SAE AMS3892/6A-2005 Tow or Yarn, Carbon Fibers For Structural Composites GF 325 (2241) Tensile Strength, 57 (393) Tensile Modulus
SAE AMS3892/7A-2005 Tow or Yarn, Carbon Fibers For Structural Composites GF (0X) 400 (2758) Tensile Strength, 33 (228) Tensile Modulus
SAE AMS3892/8A-2005 Tow or Yarn, Carbon Fibers For Structural Composites GF (0X) 400 (2758) Tensile Strength, 40 (276) Tensile Modulus
SAE AMS3901/3-1992 YARN, ORGANIC FIBER For Structural Composites OY 400,000 (2760) Tensile Strength, 17,500,000 (121) Tensile Modulus 1140 Denier
SAE AMS3892/3A-2011 TOW OR YARN, CARBON (GRAPHITE) FIBERS For Structural Composites GF 400 (2760) Tensile Strength, 40 (275) Tensile Modulus
SAE AMS3892/6-1984 TOW OR YARN, CARBON (GRAPHITE) FIBERS For Structural Composites GF 325 (2240) Tensile Strength, 57 (395) Tensile Modulus
SAE AMS3901/6-1974 ROVING, ORGANIC FIBER For Structural Composites OR 450,000 (3100) Tensile Strength, 17,500,000 (121) Tensile Modulus 4560 Denier
SAE AMS3892/1A-2011 TOW OR YARN, CARBON (GRAPHITE) FIBERS For Structural Composites GF 400 (2760) Tensile Strength, 33 (228) Tensile Modulus
SAE AMS3892/5A-2011 TOW OR YARN, CARBON (GRAPHITE) FIBERS For Structural Composites GF 220 (1515) Tensile Strength, 75 (517) Tensile Modulus
SAE AMS3901/4-1974 YARN, ORGANIC FIBER For Structural Composites OY 400,000 (2760) Tensile Strength, 17,500,000 (121) Tensile Modulus 1420 Denier
SAE AMS3901/2-1974 YARN, ORGANIC FIBER For Structural Composites OY 400,000 (2760) Tensile Strength, 17,500,000 (121) Tensile Modulus 380 Denier
SAE AMS3901/5-1974 ROVING, ORGANIC FIBER For Structural Composites OR 450,000 (3100) Tensile Strength, 17,500,000 (121) Tensile Modulus 7100 Denier
SAE AMS3901/1-1974 YARN, ORGANIC FIBER For Structural Composites OY 400,000 (2760) Tensile Strength, 17,500,000 (121) Tensile Modulus 195 Denier
SAE AMS3892/4A-2011 TOW OR YARN, CARBON (GRAPHITE) FIBERS For Structural Composites GF 300 (2070) Tensile Strength, 75 (517) Tensile Modulus
SAE AMS-WW-T-700-2001 Tube, Aluminum and Aluminum Alloy, Drawn, Seamless, General Specification for
SAE AMS3892/7-1984 TOW OR YARN, CARBON (GRAPHITE) FIBERS For Structural Composites GF (OX) 400 (2760) Tensile Strength, 33 (228) Tensile Modulus
SAE AMS3892/8-1984 TOW OR YARN, CARBON (GRAPHITE) FIBERS For Structural Composites GF (OX) 400 (2760) Tensile Strength, 40 (275) Tensile Modulus
SAE AMS4416-2008 Aluminum Alloy, Extruded Profiles (2196-T8511) 2.9Cu-1.7Li-0.4Mg-0.4Ag-0.10Zr Solution Heat Treated, Stress Relieved by Stretching and Artificially Aged
SAE AMS4416A-2012 Aluminum Alloy, Extruded Profiles (2196-T8511) 2.9Cu 1.7Li 0.4Ag 0.10Zr Solution Heat Treated, Stress Relieved by Stretching and Artificially Aged
SAE AMS3892/4-1974 GRAPHITE FIBER For Structural Composites GY 70,000,000 (470) Tensile Modulus
SAE AMS3278A-2008 Sealing and Coating Compound: Polyurethane (PUR) Fuel Resistant High Tensile Strength / Elongation For Integral Fuel Tanks / Fuel Cavities / General Purpose
SAE AMS4344C-2006 Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T73511) Solution Heat Treated, Stress Relieved by Stretching, Staightened,, and Overaged UNS A97175
SAE AMS4341E-2006 Aluminum Alloy, Extrusions 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T73511) Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Overaged UNS A97050
SAE AIR4906-1995 Droplet Sizing Instrumentation Used in Icing Facilities
SAE AMS3278C-2022 Sealing and Coating Compound, Polyurethane (PUR) Fuel Resistant, High Tensile Strength/Elongation for Integral Fuel Tanks/Fuel Cavities/General Purpose

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, The use of extensometers

GB/T 14615-2006 Wheat flour.Physical characteristics of doughs.Determination of rheological properties using an extensograph

RU-GOST R, The use of extensometers

GOST ISO 13934-1-2021 Textiles. Tensile properties of fabrics. Part 1. Determination of maximum force and elongation at maximum force using the strip method
GOST R ISO 13934-2-2017 Textiles. Tensile properties of fabrics. Part 2. Determination of maximum force using the grab method
GOST R ISO 11003-2-2017 Adhesives. Determination of shear behaviour of structural adhesives. Part 2. Tensile test method using thick adherends
GOST ISO 5530-2-2014 Wheat flour. Physical characteristics of doughs. Part 2. Determination of rheological properties using an extensograph
GOST 29104.22-1991 Industrial fabrics. Method for determination of complete elongation components under load which is less than breaking load
GOST 29104.8-1991 Industrial fabrics. Method for determination of strength and strength under ball forcing
GOST R ISO 13934-1-2015 Textiles. Tensile properties of fabrics. Part 1. Determination of maximum force and elongation at maximum force using the strip method
GOST R ISO 13935-2-2017 Textiles. Seam tensile properties of fabrics and made-up textile articles. Part 2. Determination of maximum force to seam rapture using the grab method
GOST R 56785-2015 Polymer composites. Test method for tensile of flat specimens
GOST R ISO 13935-1-2018 Textiles. Seam tensile properties of fabrics and made-up textile articles. Part 1. Determination of maximum force to seam rupture using the strip method
GOST EN 1607-2011 Thermal insulating products for building applications. Method for determination of tensile strength perpendicular to faces
GOST R EN 1607-2008 Thermal insulating products for building applications. Method for determination of tensile strength perpendicular to faces
GOST R EN 1608-2008 Thermal insulating products for building applications. Method for determination of tensile strength parallel to faces
GOST EN 1608-2011 Thermal insulating products for building applications. Method for determination of tensile strength parallel to faces
GOST 23117-1991 Semiautomatic grips for tensioning of the steel in prestressed concrete structures. Specifications
GOST R 57852-2017 Composites. Method for determination of test specimens bending under tensile and compressive forces application
GOST R 57267-2016 Polymer composites system for external reinforcement. Test method for determining tensile properties

TR-TSE, The use of extensometers

TS 246-1965 METHOD OF DETERM1NING THE TENSILE STRENGTH, ELONGATION AND COUNT-STRENGTH PRODUCT OF YARN SKENS, BY THE CONSTANT SPEED DYNAMOMETER

The American Road & Transportation Builders Association, The use of extensometers

AASHTO TP 88-2010 Standard Method of Test for Evaluation of the Low-Temperature Tensile Property of Bituminous Sealants by Direct Tension Test
AASHTO TP 113-2015 Standard Method of Test for Determination of Asphalt Binder Resistance to Ductile Failure Using Double-Edge-Notched Tension (DENT) Test

AASHTO - American Association of State Highway and Transportation Officials, The use of extensometers

TP 88-2010 Standard Method of Test for Evaluation of the Low-Temperature Tensile Property of Bituminous Sealants by Direct Tension Test
T 322-2007 Standard Method of Test for Determining the Creep Compliance and Strength of Hot-Mix Asphalt (HMA) Using the Indirect Tensile Test Device
PP 96-2018 Proposed Standard Practice for Developing Dynamic Modulus Master Curves for Asphalt Mixtures Using the Indirect Tension Testing Method
T 322-2003 Standard Method of Test for Determining the Creep Compliance and Strength of Hot-Mix Asphalt (MHA) Using the Indirect Tensile Test Device
TP9-1994 Standard Test Method for Determining the Creep Compliance and Strength of Hot Mix Asphalt (HMA) Using the Indirect Tensile Test Device (Edition 1C)

KR-KS, The use of extensometers

KS F 2157-2-2023 Method of tension test for structural wood-based panels
KS K ISO 2062-2019 Textiles — Yarns from packages — Determination of single-end breaking force and elongation at break using constant rate of extension(CRE) tester
KS K ISO 9073-18-2015 Textiles — Test methods for nonwovens — Part 18: Determination of breaking strength and elongation of nonwoven materials using the grab tensile test
KS D ISO 7539-4-2018 Corrosion of metals and alloys－Stress corrosion testing－Part 4：Preparation and use of uniaxially loaded tension specimens
KS M ISO 11003-2-2020 Adhesives — Determination of shear behaviour of structural adhesives — Part 2: Tensile test method using thick adherends
KS D ISO 7539-4-2018(2023) Corrosion of metals and alloys－Stress corrosion testing－Part 4：Preparation and use of uniaxially loaded tension specimens
KS V ISO 6043-2013(2023) Shipbuilding and marine structures — Eye and fork assemblies under tension load — Main dimensions
KS K ISO 13935-1-2015 Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 1: Determination of maximum force to seam rupture using the strip method

Canadian General Standards Board （CGSB), The use of extensometers

CGSB 9.0 NO. 4-92-CAN/CGSB-1992 Methodes D'Essai Des Pates Et Du Papier Comportement A La Traction Des Papiers Et Cartons (A L'Aide D'Un Appareil A Vitesse Constante D'Allongement)

HU-MSZT, The use of extensometers

PL-PKN, The use of extensometers

PN BN 6141-02-1964
PN Z55101-1988 Medical instruments Reusable needles Dimensions

PT-IPQ, The use of extensometers

NP 2144-1987
NP EN ISO 13935-1:2001 Testiles Seam tensile properties of fabrics and made-up textile articles Part 1:Determination of maximum force to seam rupture using the strip method(ISO 13935-1:1999)
NP EN ISO 13935-2:2001 Testiles Seam tensile properties of fabrics and made-up textile articles Part 2:Determination of maximum force to seam rupture using the grab method(ISO 13935-2:1999)
NP EN 524-5-2000 Steel strip sheaths for prestressing tendons Test methods Part 5:Determination of tensile load resistance
NP EN ISO 13934-1:2001 Textiles Tensile properties of fabrics Part 1:Determination of maximum force and elongation at maximum force using the strip method(ISO 13934-1:1999)
NP EN ISO 13934-2:2001 Textiles Tensile properties of fabrics Part 2:Determination of maximum force using the grab method(ISO 13934-2:1999)

ESDU - Engineering Sciences Data Unit, The use of extensometers

ESDU 83002-1982 Allowable stresses for helical compression and tension springs of round wire.
STRUCT 02.04.04 A-1980 Initial buckling of flat plates under bending and compression or tension.
ESDU 82022-1982 Endurance of steel lugs with clearance-fit pins. (Tensile mean stress.)

Group Standards of the People's Republic of China, The use of extensometers

T/GZZJ 06-2020 Determination of tensile properties of polylactic acid filaments for 3D printing
T/GDCA 018-2023 General principles of facial mask for radiofrequency appliance

ZA-SANS, The use of extensometers

SANS 6161:2005 Non-recoverable extension of textile floor coverings as imposed by mechanical action

未注明发布机构, The use of extensometers

BS EN ISO 7539-4:1995(2000) Corrosion of metals and alloys — Stress corrosion testing — Part 4 : Preparation and use of uniaxially loaded tension specimens
DIN EN 10002-3 Beiblatt 1:1994 Metallic materials tensile test Part 3: Calibration of force gauge data for testing testing machines with uniaxial loading Notes on application
BS 6319-7:1985(1999) Testing of resin compositions for use in construction — Part 7 : Method for measurement of tensile strength
BS EN ISO 9513:2012(2013) Metallic materials — Calibration of extensometer systems used in uniaxial testing

GOSTR, The use of extensometers

GOST R 58406.6-2020 Automobile roads of general use. Asphalt mixtures and asphalt concrete for road pavement. Method for determination of tensile strength and limit of relative tensile strain

U.S. Military Regulations and Norms, The use of extensometers

ARMY A-A-52298 B-2004 TRIPOD, SURVEYING: EXTENSION-LEG TYPE

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, The use of extensometers

GB/T 33157-2016 Thermal insulating products for building applications—Determination of tensile strength parallel to faces

ES-UNE, The use of extensometers

UNE-EN 14932:2018 Plastics - Thermoplastic stretch films for wrapping silage bales
UNE-EN 3475-510:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Part 510: Tensile strength and elongation of extruded insulation, sheath and jacket material (Endorsed by AENOR in August of 2002.)
UNE-EN 3475-505:2023 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 505: Tensile test on conductors and strands (Endorsed by Asociación Española de Normalización in April of 2023.)
UNE-EN ISO 29766:2023 Thermal insulating products for building applications - Determination of tensile strength parallel to faces (ISO 29766:2022)

YU-JUS, The use of extensometers

JUS N.C1.401-1985 Round hard drawn AlMgSiE wire for electrical purposes
JUS N.C1.301-1985 Hard dravvn aluminium round wire for electrical purposes

GM North America, The use of extensometers

GM9674P-2011 Procedure to Verify That Heat Stakes Resist a Minimum Tensile Load Issue 2; Do Not Use on New Programs; No Replacement
GM9753P-2011 Tensile and Shrinkage Test for Expanding Adhesives and Sealers Issue 4; Do Not Use on New Programs; No Replacement

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, The use of extensometers

PREN 3475-510-1997 Aerospace Series Cables@ Electrical@ Aircraft Use Test Methods Part 510: Tensile Strength and Elongation of Extruded Insulation@ Sheath and Jacket Material (Edition P 1)
PREN 3475-505-2010 Aerospace series Cables@ electrical@ aircraft use Test methods Part 505: Tensile test on conductors and strands (Edition P 3)
PREN 3475-505-2006 Aerospace series Cables@ electrical@ aircraft use Test methods Part 505: Tensile test on conductors and strands (Edition P 2)

ACI - American Concrete Institute, The use of extensometers

ACI SP-208-2003 Examples for the Design of Structural Concrete with Strut-and-Tie Models
ACI SP-273-2010 Further Examples for the Design of Structural Concrete with Strut-and-Tie Models
ACI SP-273-2011 Further Examples for the Design of Structural Concrete with Strut-and-Tie Models

International Electrotechnical Commission (IEC), The use of extensometers

IEC TR 61869-103:2012 Instrument transformers - The use of instrument transformers for power quality measurement
IEC 60476:1993 Nuclear instrumentation; electrical measuring systems and instruments utilizing ionizing radiation sources; general aspects

Association of German Mechanical Engineers, The use of extensometers

DVS 2203-4 Beiblatt 3-2008 Testing of welded joints between panels and pipes made of thermoplastics - Tensile creep-rupture test - Checking of the demanded tensile creep-rupture welding factor and of the minimum service life of welded joints between polyethylenes (PE 80 and PE 100)

Aerospace Industries Association, The use of extensometers

AIA NAS 1348-1979 (Inactive)Fasteners - Recommended Tensile Stress Areas for External Threaded (Rev. 1)
AIA NAS 1402-1983 (Inactive)Screw, Machine, Aircraft, Pan Head, Phillips Recess, 160,000 psi Tensile (Superseded - November 1983; Use NAS 7700 Thru NAS 7706) (Rev. 5)
AIA NAS 1402-1406-1983 (Inactive)Screw, Machine, Aircraft, Pan Head, Phillips Recess, 160,000 psi Tensile (Superseded - November 1983; Use NAS 7700 Thru NAS 7706) (Rev. 5)
AIA NAS 1403-1983 (Inactive)Screw, Machine, Aircraft, Pan Head, Phillips Recess, 160,000 psi Tensile (Superseded - November 1983; Use NAS 7700 Thru NAS 7706) (Rev. 5)
AIA NAS 1404-1983 (Inactive)Screw, Machine, Aircraft, Pan Head, Phillips Recess, 160,000 psi Tensile (Superseded - November 1983; Use NAS 7700 Thru NAS 7706) (Rev. 5)
AIA NAS 1405-1983 (Inactive)Screw, Machine, Aircraft, Pan Head, Phillips Recess, 160,000 psi Tensile (Superseded - November 1983; Use NAS 7700 Thru NAS 7706) (Rev. 5)
AIA NAS 1406-1983 (Inactive)Screw, Machine, Aircraft, Pan Head, Phillips Recess, 160,000 psi Tensile (Superseded - November 1983; Use NAS 7700 Thru NAS 7706) (Rev. 5)

American Society of Mechanical Engineers (ASME), The use of extensometers

ASME 2172-2001 Use of B 43 Seamless Red Brass Pipe (UNS C23000) with Drawn General Purpose Temper (H58) for Threaded Piping for Construction of PMB and PEB Miniature Electric Boilers Section I

European Committee for Electrotechnical Standardization（CENELEC）, The use of extensometers

HD 475 S1-1986 Dimensions of Planchets Used in Nuclear Electronic Instruments

Institute of Electrical and Electronics Engineers (IEEE), The use of extensometers

IEEE 1210/COR 1-2014 Standard Tests for Determining Compatibility of Cable-Pulling Lubricants with Wire and Cable Corrigendum 1

能源部, The use of extensometers

SY/T 5511-1992 Use and maintenance of SDZ-120 digital seismograph

IT-UNI, The use of extensometers

UNI 7563-P2-1976

Hubei Provincial Standard of the People's Republic of China, The use of extensometers

DB42/T 2070-2023 Magnetostrictive guided wave detection method and evaluation of corroded and broken wires in bridge cables

ECMA - European Association for Standardizing Information and Communication Systems, The use of extensometers

ECMA 115-1986 Common Secondary Keyboard Layout for Languages Using a Latin Alphabet