ZH
RU
ES

Crystal Size and Grain Size

Crystal Size and Grain Size, Total:313 items.

In the international standard classification, Crystal Size and Grain Size involves: Testing of metals, Coals, Non-ferrous metals, Ferrous metals, Integrated circuits. Microelectronics, Iron and steel products, Particle size analysis. Sieving, Cutting tools, Materials for the reinforcement of composites, Products of non-ferrous metals, Products of the chemical industry, Metalliferous minerals, Powder metallurgy, Audio, video and audiovisual engineering, Surface treatment and coating, Analytical chemistry, Electronic display devices, Ceramics, Non-destructive testing, Semiconducting materials, Solar energy engineering, Rectifiers. Convertors. Stabilized power supply, Mechanical structures for electronic equipment, Air quality, Small craft, Construction materials, Fuels, Internal combustion engines for road vehicles, Structure and structure elements, Ground service and maintenance equipment, Wood, sawlogs and sawn timber, Technical drawings, Installations in buildings, Hospital equipment, Furniture, Clothes, Ergonomics, Paints and varnishes, Materials and components for railway engineering, Components for electrical equipment, Electromechanical components for electronic and telecommunications equipment, Shipbuilding and marine structures in general, Water quality, Fluid power systems, Linear and angular measurements, Rotating machinery, Freight distribution of goods, Machine tool systems.


IN-BIS, Crystal Size and Grain Size

Korean Agency for Technology and Standards (KATS), Crystal Size and Grain Size

HU-MSZT, Crystal Size and Grain Size

Indonesia Standards, Crystal Size and Grain Size

  • SNI 13-4702-1998 Determination of grain size of coal by sieving equipment
  • SNI 13-4715-1998 Determination of particle size distribution by Warman cyclosizer elustriation methods
  • SNI 4137-2012 Test method for determination of the smallest average size (UKR) and the largest average size (UBR) aggregate grains

International Organization for Standardization (ISO), Crystal Size and Grain Size

  • ISO/DIS 643:2023 Steels — Micrographic determination of the apparent grain size
  • ISO 16463:2004 Polycristalline diamond inserts, tipped - Dimensions, types
  • ISO 16463:2014 Polycristalline diamond inserts, tipped - Dimensions, types
  • ISO 13067:2020 Microbeam analysis — Electron backscatter diffraction — Measurement of average grain size
  • ISO 4499-2:2020 Hardmetals — Metallographic determination of microstructure — Part 2: Measurement of WC grain size
  • ISO 12633-2:2011 Hot-finished structural hollow sections of non-alloy and fine grain steels - Part 2: Dimensions and sectional properties
  • ISO 13383-1:2012 Fine ceramics (advanced ceramics, advanced technical ceramics) - Microstructural characterization - Part 1: Determination of grain size and size distribution
  • ISO 10799-2:2011 Cold-formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Dimensions and sectional properties
  • ISO 8559:1989 Garment construction and anthropometric surveys; body dimensions
  • ISO 12215-5:2019 Small craft — Hull construction and scantlings — Part 5: Design pressures for monohulls, design stresses, scantlings determination
  • ISO 3040:1990 Technical drawings; dimensioning and tolerancing; cones

German Institute for Standardization, Crystal Size and Grain Size

  • DIN EN ISO 643:2020-06 Steels - Micrographic determination of the apparent grain size (ISO 643:2019, Corrected version 2020-03); German version EN ISO 643:2020
  • DIN EN ISO 2624:1995-08 Copper and copper alloys - Estimation of average grain size (ISO 2624:1990); German version EN ISO 2624:1995
  • DIN EN ISO 643:2023-08 Steels - Micrographic determination of the apparent grain size (ISO/DIS 643:2023); German and English version prEN ISO 643:2023 / Note: Date of issue 2023-07-07*Intended as replacement for DIN EN ISO 643 (2020-06).
  • DIN EN 16090:2020-02 Copper and copper alloys - Estimation of average grain size by ultrasound; German version EN 16090:2019
  • DIN EN 15181/A1:2020-02 Copper and copper alloys - Estimation of average grain size by ultrasound; German version EN 16090:2019
  • DIN EN 16247-4:2020-02 Copper and copper alloys - Estimation of average grain size by ultrasound; German version EN 16090:2019
  • DIN ISO 16463:2005 Polycrystalline diamond inserts, tipped - Dimensions, types (ISO 16463:2004);English version of DIN ISO 16463:2005
  • DIN EN ISO 643:2017 Steel - Micrographic determination of the apparent grain size (ISO/DIS 643:2017); German and English version prEN ISO 643:2017
  • DIN ISO 13067:2021-08 Microbeam analysis - Electron backscatter diffraction - Measurement of average grain size (ISO 13067:2020)
  • DIN ISO 16463:2015 Polycrystalline diamond inserts, tipped - Dimensions, types (ISO 16463:2014)
  • DIN ISO 16463:2015-08 Polycrystalline diamond inserts, tipped - Dimensions, types (ISO 16463:2014)
  • DIN EN 16090:2012 Copper and copper alloys - Estimation of average grain size by ultrasound; German version EN 16090:2011
  • DIN ISO 13067:2021 Microbeam analysis - Electron backscatter diffraction - Measurement of average grain size (ISO 13067:2020)
  • DIN EN ISO 13383-1:2016-11 Fine ceramics (advanced ceramics, advanced technical ceramics) - Microstructural characterization - Part 1: Determination of grain size and size distribution (ISO 13383-1:2012); German version EN ISO 13383-1:2016
  • DIN EN ISO 4499-2:2020-11 Hardmetals - Metallographic determination of microstructure - Part 2: Measurement of WC grain size (ISO 4499-2:2020); German version EN ISO 4499-2:2020
  • DIN 51455:2020 Liquid petroleum products - Determination of particle number and particle size in oils
  • DIN 51455:2020-12 Liquid petroleum products - Determination of particle number and particle size in oils
  • DIN EN ISO 4499-2:2018 Hardmetals - Metallographic determination of microstructure - Part 2: Measurement of WC grain size (ISO/DIS 4499-2:2018); German and English version prEN ISO 4499-2:2018
  • DIN EN 10210-2:2006 Hot finished structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties; English version of DIN EN 10210-2:2006-07
  • DIN EN 10210-2:1997 Hot finished structural hollow sections of non-alloy and fine grain structural steels - Part 2: Tolerances, dimensions and sectional properties; German version EN 10210-2:1997
  • DIN EN 10219-2:2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties; English version of DIN EN 10219-2:2006-07
  • DIN ISO 3040:1991 Technical drawings; dimensioning and tolerancing; cones; identical with ISO 3040:1990
  • DIN 24339:2016 Hydraulic fluid power - Reservoirs made of steel, nominal sizes 63 to 2 000 - Dimensions, requirements, testing
  • DIN 16167:1991-09 Industrial straight stem liquid-in-glass thermometers with round case, of nominal size 160; dimensions anf nominal ranges
  • DIN 16174:1991-09 Industrial straight stem liquid-in glass thermometer with round case, of nominal size 250; dimensions and nominal ranges
  • DIN EN 452:1995-06 Swap bodies - Swap bodies of class A - Dimensions and general requirements; German version EN 452:1995
  • DIN EN ISO 12215-5:2020-03 Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2019); German version EN ISO 12215-5:2019
  • DIN 16185:1991-09 Industrial straight stem liquid-in-glass thermometers with V-shaped case, of nominal size 150; dimensions and nominal ranges
  • DIN 16189:1991-09 Industrial straight stem liquid-in-glass thermometers with V-shaped case, of nominal size 200; dimensions and nominal ranges
  • DIN 16181:1991-09 Industrial straight stem liquid-in-glass thermometers with V-shaped case, of nominal size 110; dimensions and nominal ranges
  • DIN 16168:1991-09 Industrial 90° angle stem liquid-in-glass thermometers with round case, of nominal size 160; dimensions and nominal ranges
  • DIN 16176:1991-09 Industrial 135 ° angle stem liquid-in-glass thermometers with round case, of nominal size 250; dimensions and nominal ranges
  • DIN 16175:1991-09 Industrial 90° angle stem liquid-in-glass thermometers with round case, of nominal size 250; dimensions and nominal ranges
  • DIN EN ISO 13383-1:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Microstructural characterization - Part 1: Determination of grain size and size distribution (ISO 13383-1:2012); German version EN ISO 13383-1:2016

British Standards Institution (BSI), Crystal Size and Grain Size

  • BS EN ISO 643:2020 Steels. Micrographic determination of the apparent grain size
  • 17/30363662 DC BS EN ISO 643 Steels. Micrographic determination of the apparent grain size
  • BS EN 16090:2011 Copper and copper alloys. Estimation of average grain size by ultrasound
  • BS EN 16090:2019 Copper and copper alloys. Estimation of average grain size by ultrasound
  • 19/30385570 DC BS EN 16090. Copper and copper alloys. Estimation of average grain size by ultrasound
  • BS EN ISO 13383-1:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Microstructural characterization. Determination of grain size and size distribution
  • BS ISO 13067:2020 Microbeam analysis. Electron backscatter diffraction. Measurement of average grain size
  • BS EN ISO 4499-2:2020 Hardmetals. Metallographic determination of microstructure - Measurement of WC grain size
  • BS ISO 16463:2004 Polycrystalline diamond inserts, tipped - Dimensions, types
  • BS ISO 16463:2014 Polycristalline diamond inserts, tipped. Dimensions, types
  • BS EN ISO 4499-2:2010 Hardmetals. Metallographic determination of microstructure. Measurement of WC grain size
  • 19/30365236 DC BS ISO 13067. Microbeam analysis. Electron backscatter diffraction. Measurement of average grain size
  • 18/30369648 DC BS EN ISO 4499-2. Hardmetals. Metallographic determination of microstructure. Part 2. Measurement of WC grain size
  • BS EN 10210-2:2006 Hot finished structural hollow sections of non-alloy and fine grain steels — Part 2: Tolerances, dimensions and sectional properties
  • BS EN 10210-3:2020 Hot finished structural hollow sections of non-alloy and fine grain steels — Part 2: Tolerances, dimensions and sectional properties
  • BS EN 15415-1:2011 Solid recovered fuels. Determination of particle size distribution. Screen method for small dimension particles
  • BS EN 10219-2:1997 Cold formed welded structural sections of non-alloy and fine grain steels - Tolerances, dimensions and sectional properties
  • 17/30366966 DC BS EN ISO 12215-7. Small craft. Hull construction and scantlings. Part 7. Scantlings determination of multihulls
  • BS EN ISO 12215-5:2019 Small craft. Hull construction and scantlings - Design pressures for monohulls, design stresses, scantlings determination
  • BS DD CEN/TS 15149-2:2006 Solid biofuels - Methods for the determination of particle size distribution - Vibrating screen method using sieve apertures of 3,15 mm and below
  • BS EN 933-2:1996 Tests for geometrical properties of aggregates - Determination of particle size distribution - Test sieves, nominal size of apertures
  • BS EN 15415-3:2012 Solid recovered fuels. Determination of particle size distribution. Method by image analysis for large dimension particles
  • BS EN 10219-2:2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Tolerances, dimensions and sectional properties
  • BS EN 10219-3:2020 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Tolerances, dimensions and sectional properties
  • BS ISO 3040:2000 Technical drawings - Dimensioning and tolerancing - Cones
  • BS ISO 13318-2:2007 Determination of particle size distribution by centrifugal liquid sedimentation methods. Photocentrifuge method
  • BS ISO 13318-1:2002 Determination of particle size distribution by centrifugal liquid sedimentation methods - General principles and guidelines
  • BS EN ISO 12215-5:2008 Small craft - Hull construction and scantlings - Design pressures for monohulls, design stresses, scantlings determination
  • BS EN 452:1996 Swap bodies - Swap bodies of Class A. Dimensions and general requirements
  • BS EN 284:2007 Swap bodies. Non-stackable swap bodies of class C. Dimensions and general requirements
  • BS EN 284:1992 Swap bodies - Swap bodies of class C. Dimensions and general requirements
  • BS ISO 15552:2018 Tracked Changes. Pneumatic fluid power. Cylinders with detachable mountings, 1 000 kPa (10 bar) series, bores from 32 mm to 320 mm. Basic, mounting and accessories dimensions

Danish Standards Foundation, Crystal Size and Grain Size

  • DS/EN ISO 2624:1995 Copper and copper alloys - Estimation of average grain size
  • DS/EN ISO 643:2013 Steels - Micrographic determination of the apparent grain size
  • DS/EN 16090:2012 Copper and copper alloys - Estimation of average grain size by ultrasound
  • DS/EN 623-3:2001 Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 3: Determination of grain size and size distribution (characterized by the Linear Intercept Method)
  • DS 923:1954 Women's hosiery ware. Size designation and body dimensions
  • DS 918:1959 Girl's hosiery ware. Size designation an body dimensions
  • DS 919:1959 Boy's hosiery ware. Size designation and body dimensions
  • DS/EN ISO 4499-2:2010 Hardmetals - Metallographic determination of microstructure - Part 2: Measurement of WC grain size
  • DS/EN 10210-2+AC:2009 Hot finished structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties
  • DS/EN 10219-2:2009 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties
  • DS/EN ISO 12215-5:2008 Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination
  • DS/EN 17289-1:2021 Characterization of bulk materials – Determination of a size-weighted fine fraction and crystalline silica content – Part 1: General information and choice of test methods
  • DS/EN 452:1996 Swap bodies - Swap bodies of Class A - Dimensions and general requirements
  • DS/ISO 12215-7:2020 Small craft – Hull construction and scantlings – Part 7: Determination of loads for multihulls and of their local scantlings using ISO 12215-5

AENOR, Crystal Size and Grain Size

  • UNE 37230:1986 LEAD AND LEAD ALLOYS- ESTIMATION OF THE AVERAGE GRAIN SIZE.
  • UNE-EN 16090:2012 Copper and copper alloys - Estimation of average grain size by ultrasound
  • UNE-EN ISO 643:2013 Steels - Micrographic determination of the apparent grain size (ISO 643:2012)
  • UNE-EN ISO 4499-2:2011 Hardmetals - Metallographic determination of microstructure - Part 2: Measurement of WC grain size (ISO 4499-2:2008)
  • UNE-EN 10210-2:2007 Hot finished structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties
  • UNE-EN 10219-2:2007 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties

ES-UNE, Crystal Size and Grain Size

  • UNE 37230:1987 ERRATUM LEAD AND LEAD ALLOYS- ESTIMATION OF THE AVERAGE GRAIN SIZE.
  • UNE-EN 16090:2020 Copper and copper alloys - Estimation of average grain size by ultrasound
  • UNE-EN ISO 643:2020 Steels - Micrographic determination of the apparent grain size (ISO 643:2019, Corrected version 2020-03)
  • UNE-EN ISO 13383-1:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Microstructural characterization - Part 1: Determination of grain size and size distribution (ISO 13383-1:2012) (Endorsed by AENOR in June of 2016.)
  • UNE-EN ISO 4499-2:2021 Hardmetals - Metallographic determination of microstructure - Part 2: Measurement of WC grain size (ISO 4499-2:2020)
  • UNE-EN ISO 12215-5:2020 Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2019)

Professional Standard - Ferrous Metallurgy, Crystal Size and Grain Size

  • YB/T 4290-2012 Determination method of the largest grain size grade (ALA grain size) on the metallographic inspection surface

RO-ASRO, Crystal Size and Grain Size

  • STAS SR ISO 2624:1990 Copper and copper alloys. Estimation of average grain size
  • STAS 9162-1973 NON-METAL BEARING MINING PRODUCTS WITH CARBONATE CONTENT Determination of grain size
  • STAS 9471-1985 Compression ignition engines fuel injection pumps in line; size a Overall and mating dimensions
  • STAS 12416/2-1986 Hydraulic fluid power DIRECTIONAL CONTROL S1LDE VALVES p?315 bar, size 05 Types and basic dimensions
  • STAS 10197-1987 TYPE EE AND EI FERRITE CORES Dimensions
  • STAS 10501/2-1980 CERAMIC BLOCKS FOR WALLS Shapes and dimensions
  • STAS 10745-1987 SOFT FERRITES UU AND UT FERRITE CORES Dimensions

RU-GOST R, Crystal Size and Grain Size

  • GOST 21073.0-1975 Non-ferrous metals. Determination of grain size. General requirements
  • GOST R ISO 14250-2013 Steel. Metallographic characterization of duplex grain size and distribution
  • GOST 25734-1996 Alumina. Method for crystallooptic determination of monograins sizes in non-metallurgic alumina
  • GOST R 53205-2008 Non-destructive testing. Evaluation of grains size of steel by ultrasound. General requirements
  • GOST 27591-1988 Power semiconductor modules. Orerall and mounting dimensions
  • GOST 15059-1988 Injectors for motor and tractor disel engines. Overall and coupling dimensions
  • GOST 16601-1971 Connection for airstarting gas turbine engines. Coupling and mounting dimensions
  • GOST 19197-1973 Pot cores of ferrite. Construction and sizes
  • GOST 24011-1980 Belt ring magnetic. Construction and dimensions
  • GOST R 55566-2013 Solid recovered fuels. Determination of particle size distribution. Part 1. Screen method for small dimension particles

Association Francaise de Normalisation, Crystal Size and Grain Size

  • NF A04-102*NF EN ISO 643:2020 Steels - Micrographic determination of the apparent grain size
  • NF A51-130*NF EN 16090:2019 Copper and copper alloys - Estimation of average grain size by ultrasound
  • NF E75-101:2001 Coated abrasives - Grain size analysis - Part 2 : determination of grain size distribution of macrogrits P12 to P220.
  • NF EN 16090:2019 Cuivre et alliages de cuivre - Estimation de la taille moyenne de grain par ultrasons
  • NF ISO 16463:2014 Plaquettes brasées en diamant polycristallin - Dimensions, types
  • NF E66-314:2004 Polycrystalline diamond inserts, tipped - Dimensions, types.
  • NF E66-314*NF ISO 16463:2014 Polycristalline diamond inserts, tipped - Dimensions, types
  • NF EN ISO 13383-1:2016 Céramiques techniques - Caractérisation microstructurale - Partie 1 : Détermination de la taille et de la distribution des grains
  • NF A95-186-2*NF EN ISO 4499-2:2020 Hardmetals - Metallographic determination of microstructure - Part 2 : measurement of WC grain size
  • NF EN ISO 4499-2:2020 Métaux-durs - Détermination métallographique de la microstructure - Partie 2 : mesurage de la taille des grains de WC
  • NF EN 60679-3:2013 Oscillateurs pilotés par quartz sous assurance de la qualité - Partie 3 : encombrements normalisés et connexions des sorties
  • NF A49-502-2:2006 Hot finished structural hollow sections of non-alloy and fine grain steels - Part 2 : tolerances, dimensions and sectional properties.
  • NF A49-502-2:1997 Hot finished structural hollow sections of non-alloy and fine grain structural steels. Part 2 : tolerances, dimensions and sectional properties.
  • NF B41-204-1*NF EN ISO 13383-1:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Microstructural characterization - Part 1 : Determination of grain size and size distribution
  • NF A49-540-2:2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2 : tolerances, dimensions and sectional properties.
  • NF A49-540-2:1997 Cold form welded structural hollow sections of non-alloy and fine grain steels. Part 2 : tolerances, dimensions and sectional properties.
  • NF F11-002:1970 Railway transport equipment. Hand brake. Handles. Overall and interchangeability dimensions. Mounting.
  • NF J95-046-5*NF EN ISO 12215-5:2019 Small craft - Hull construction and scantlings - Part 5 : design pressures for monohulls, design stresses, scantlings determination
  • NF H90-202:1992 Swap bodies - Non-stackable swap bodies of class C - Dimension and general requirements.
  • NF H90-204*NF EN 452:1995 Swap bodies. Swap bodies of class A. Dimensions and general requirements.
  • NF EN 452:1995 Caisses mobiles - Caisses mobiles de la classe A - Dimensions et spécifications générales.

Group Standards of the People's Republic of China, Crystal Size and Grain Size

  • T/JSSIA 0004-2017 Outline Dimensions of Wafer Level Chip Scale Package
  • T/SZBX 018-2021 Products of Wafer Level Chip Scale Package
  • T/CVIA 41-2014 LCD TV screen mainstream size specification
  • T/CSTM 00799-2023 Determination of grain size in steel—High temperature laser scanning confocal microscope method
  • T/CVIA 1-2007 Specifications for Mainstream Dimensions of LCD TV Screens Part 1 Mainstream Dimensions of Liquid Crystal Displays Used in Color TVs
  • T/JSSIA 0006-2021 Oultine dimensions of Fan-out Wafer-Level Package
  • T/CVIA 37-2014 Specifications for Tolerance of Outline Dimensions of LCD TV Screens
  • T/CVIA 37-2022 Specification for Tolerance of Outline Dimensions of Liquid Crystal Display
  • T/JSSIA 0003-2017 Series Programs for Wafer Level Chip Scale Package
  • T/CVIA 43-2015 Specifications for appearance and installation dimensions of LCD TV screen T-CON board
  • T/CPIA 0003-2017 Dimensions and Technical Requirements for Mounting Holes of Crystalline Silicon Photovoltaic Modules for Ground Use
  • T/CPIA 0003-2022 Dimensions and Technical Requirements for Mounting Holes of Crystalline Silicon Photovoltaic Modules for Ground Use

American Society for Testing and Materials (ASTM), Crystal Size and Grain Size

  • ASTM E1181-87(1998)e1 Standard Test Methods for Characterizing Duplex Grain Sizes
  • ASTM E1181-02 Standard Test Methods for Characterizing Duplex Grain Sizes
  • ASTM E1181-02(2023) Standard Test Methods for Characterizing Duplex Grain Sizes
  • ASTM E930-99(2015) Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)
  • ASTM B390-92(2006) Standard Practice for Evaluating Apparent Grain Size and Distribution of Cemented Tungsten Carbides
  • ASTM B390-92(1996)e1 Standard Practice for Evaluating Apparent Grain Size and Distribution of Cemented Tungsten Carbides
  • ASTM B390-92(2000) Standard Practice for Evaluating Apparent Grain Size and Distribution of Cemented Tungsten Carbides
  • ASTM E2627-13(2019) Standard Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials
  • ASTM D3942-03(2008) Standard Test Method for Determination of the Unit Cell Dimension of a Faujasite-Type Zeolite
  • ASTM D3942-03 Standard Test Method for Determination of the Unit Cell Dimension of a Faujasite-Type Zeolite
  • ASTM D3942-97 Standard Test Method for Determination of the Unit Cell Dimension of a Faujasite-Type Zeolite
  • ASTM D3942-03(2013) Standard Test Method for Determination of the Unit Cell Dimension of a Faujasite-Type Zeolite
  • ASTM UOP856-07 Particle Size Distribution of Powders by Laser Light Scattering
  • ASTM D8489-23 Test Method for Determination of Microplastics Particle and Fiber Size, Distribution, Shape, and Concentration in Waters with High to Low Suspended Solids Using a Dynamic Image Particle Size and Shape
  • ASTM D8489-23e1 Standard Test Method for Determination of Microplastics Particle and Fiber Size, Distribution, Shape, and Concentration in Waters with High to Low Suspended Solids Using a Dynamic Image Particle Size
  • ASTM D6192/D6192M-19(2023) Standard Tables of Body Measurements for Girls, Sizes 2 to 20 (Reg & Slim) and Girls Plus

CZ-CSN, Crystal Size and Grain Size

  • CSN 42 0463-1984 Steel. Method for estimating the grain size of austenite on fractures
  • CSN 42 0464-1962 Methods for estimating the average grain size of non — ferrous metals
  • CSN 42 0462-1983 Metal testing. Methods for estimating the average grain size of steel and non-ferrous metals
  • CSN 35 1605-1988 Power semiconductor devices. Main and connecting dimensions
  • CSN 35 1607-1988 Power semiconductor devices. Air coolers. Main and connecting dimensions
  • CSN 65 4812-1969 Determination of size and mechanical strength of granules in fertilizers
  • CSN 35 0805-1988 Double brush-holders for electrical machines. Assembly and over-all dimensions
  • CSN 35 0804-1980 Rotating electrical machines. Radial brush-holders for electrical machines. Assembly and overall dimensions

Lithuanian Standards Office , Crystal Size and Grain Size

  • LST EN 16090-2012 Copper and copper alloys - Estimation of average grain size by ultrasound
  • LST EN ISO 2624:2000 Copper and copper alloys - Estimation of average grain size (ISO 2624:1990)
  • LST EN ISO 643:2013 Steels - Micrographic determination of the apparent grain size (ISO 643:2012)
  • LST EN 623-3-2002 Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 3: Determination of grain size and size distribution (characterized by the Linear Intercept Method)
  • LST EN ISO 4499-2:2010 Hardmetals - Metallographic determination of microstructure - Part 2: Measurement of WC grain size (ISO 4499-2:2008)
  • LST EN 10210-2-2006 Hot finished structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties
  • LST EN 10210-2-2006/AC-2007 Hot finished structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties
  • LST EN 10219-2-2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties
  • LST EN 17289-2-2021 Characterization of bulk materials - Determination of a size-weighted fine fraction and crystalline silica content - Part 2: Calculation method
  • LST EN 452-2001 Swap bodies - Swap bodies of Class A - Dimensions and general requirements

CEN - European Committee for Standardization, Crystal Size and Grain Size

  • PREN 16090-2019 Copper and copper alloys - Estimation of average grain size by ultrasound
  • DD ENV 623-3-1993 Advanced Technical Ceramics - Monolithic Ceramics - General and Textural Properties - Part 3: Determination of Grain Size
  • EN 623-3:2001 Advanced Technical Ceramics - Monolithic Ceramics - General and Textural Properties - Part 3: Determination of Grain Size and Size Distribution (Characterized by the Liner Intercept Method)
  • PREN 17289-2-2019 Characterization of bulk materials - Determination of a sizeweighted fine fraction and crystalline silica content - Part 2: Calculation method

Japanese Industrial Standards Committee (JISC), Crystal Size and Grain Size

  • JIS R 7651:2007 Measurement of lattice parameters and crystallite sizes of carbon materials
  • JIS G 0551 AMD 1:2022 Steels -- Micrographic determination of the apparent grain size (Amendment 1)
  • JIS B 4141:1998 Diamond/CBN products -- Diamond or CBN grinding wheels and saws -- Dimensional characteristics and code for the forms
  • JIS B 8387:2000 Hydraulic fluid power -- Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05 -- Clamping dimensions

European Committee for Standardization (CEN), Crystal Size and Grain Size

  • EN ISO 643:2020 Steels - Micrographic determination of the apparent grain size (ISO 643:2019, Corrected version 2020-03)
  • EN ISO 643:2012 Steels - Micrographic determination of the apparent grain size
  • EN 16090:2011 Copper and copper alloys - Estimation of average grain size by ultrasound
  • EN 10210-2:1997 Hot Finished Structural Hollow Sections of Non-Alloy and Fine Grain Structural Steels - Part 2: Tolerances, Dimensions and Sectional Properties
  • prEN 10210-2-1992 Hot finished structural hollow sections of non-alloy and fine grain structural steels; part 2: tolerances, dimensions and sectional properties
  • EN 10219-2:2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties
  • EN 10219-2:1997 Cold Formed Welded Structural Hollow Sections of Non-Alloy and Fine Grain Steels - Part 2: Tolerances, Dimensions and Sectional Properties
  • prEN 10219-2-1992 Cold formed structural hollow sections of non-alloy and fine grain structural steels; part 2: tolerances, dimensions and sectional properties
  • EN 17289-2:2020 Characterization of bulk materials - Determination of a size-weighted fine fraction and crystalline silica content - Part 2: Calculation method
  • prEN 452-1991 Swap bodies of class A; dimensions and general requirements
  • EN 10210-2:2006 Hot finished structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties (Incorporating corrigendum February 2007)
  • EN 452:1995 Swap bodies - Swap bodies of class A - Dimensions and general requirements
  • PREN 10210-2-2003 Hot finished structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties

GM North America, Crystal Size and Grain Size

  • GM GM9613P-1994 Zinc Phosphate Crystal Size Determination Using "Faxfilm" Replication

SAE - SAE International, Crystal Size and Grain Size

  • SAE AMS2316A-1991 METALLOGRAPHIC EVALUATION OF GRAIN SIZE IN WROUGHT NICKEL AND HEAT RESISTANT ALLOYS
  • SAE ARP598D-2016 Aerospace Microscopic Sizing and Counting of Particulate Contamination for Fluid Power Systems

Society of Automotive Engineers (SAE), Crystal Size and Grain Size

  • SAE AMS2316-1989 METALLOGRAPHIC EVALUATION OF GRAIN SIZE IN WROUGHT NICKEL AND HEAT RESISTANT ALLOYS
  • SAE J444-2023 Cast Shot and Grit Size Specifications for Cleaning and Peening
  • SAE ARP1942A-2013 Across Hex Corner Dimension for Fluid Fittings and Nuts

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Crystal Size and Grain Size

  • GB/T 21952-2008 Polycystalline diamond inserts,tipped.Dimensions
  • GB/T 21952-2023 Polycrystalline diamond blade types and sizes
  • GB/T 31568-2015 Standard test method for determination of crystallite size of ZrO<下标2> coatings by Scherrer equation
  • GB/T 38532-2020 Microbeam analysis—Electron backscatter diffraction—Measurement of average grain size
  • GB/T 23413-2009 Determination of crystallite size and micro-strain of nano-materials.X-ray diffraction line broadening method
  • GB/T 3488.2-2018 Hardmetals.Metallographic determination of microstructure.Part 2:Measurement of WC grain size
  • GB/T 6251-1986 Dimensioning of outline and rule of terminals alignment for liquid crystal displays
  • GB/T 13095.2-2000 Bathroom unit-Classification and size series
  • GB/T 20117-2006 Fine ceramics（advanced ceramics,advanced technical cermics）--Sample prepartion for the determination of particle size distribution of ceramic powders

IT-UNI, Crystal Size and Grain Size

国家市场监督管理总局、中国国家标准化管理委员会, Crystal Size and Grain Size

  • GB/T 37213-2018 Test method for silicon brick dimension—Laser technology method
  • GB/T 19314.7-2019 Small craft—Hull construction and scantlings—Part 7: Scantling determination of multihulls

Professional Standard - Electron, Crystal Size and Grain Size

  • SJ/T 10706-1996 Optimum size series for contours and windows of liquid crystal display devices

YU-JUS, Crystal Size and Grain Size

  • JUS F.G0.002-1979 Clothes - garments and body measurements. Pictogram and body measures
  • JUS F.G0.009-1979 Gloves. System ofgloves si?e designation and body measurements
  • JUS F.G0.005-1979 Boy 's garments - clothes. System of garment si?e designation and body measurements
  • JUS F.G0.007-1979 Infant 's garment - clothes. System ofgarment si?e designation and body measurements
  • JUS F.G0.003-1979 Men's garment - clothes. System of garment sizedesignation and body measurements
  • JUS F.G0.004-1979 Women's garment - clothes. System ofgarment si?e designation and body measurements
  • JUS F.G0.001-1979 Clothes - garments and body measurements. Pictogram and body measures. Terms and definitions
  • JUS F.G0.006-1979 Girl'sgarments- clothes. System of garment si?e designation, si?e designation and body measurements
  • JUS F.G0.010-1979 Sock's, stocking, hoses and stocking withpanties. System of stocking size designation and body measurements
  • JUS F.G0.008-1979 Caps, hyt and similar. System ofgarment si?e designation and body measurements

未注明发布机构, Crystal Size and Grain Size

  • DIN EN ISO 643 Berichtigung 1:2004 Steel — Microphotographic determination of apparent grain size (ISO 643:2003); German version EN ISO 643:2003
  • BS EN 60970:2007(2008) Insulating liquids — Methods for counting and sizing particles
  • DIN EN 10219-2:1997 Cold formed welded structural hollow sections of non-alloy and fine grain steels — Part 2: Tolerances, dimensions and sectional properties
  • BS ISO 20203:2005(2006) Carbonaceous materials used in the production of aluminium — Calcined of crystallite size of calcined petroleum coke by X - ray diffraction
  • BS 7231-2:1990(2008) Body measurements of boys and girls from birth up to 16.9 years — Part 2 : Recommendations of body dimensions for children
  • DIN EN ISO 12215-5:2019 Small craft – Hull construction and sizing – Part 5: Monohull design pressures, design stresses, sizing determination
  • BS EN 452:1996(1999) Swap bodies — Swap bodies of Class A — Dimensions and general requirements

AR-IRAM, Crystal Size and Grain Size

FI-SFS, Crystal Size and Grain Size

AT-ON, Crystal Size and Grain Size

  • OENORM EN ISO 4499-2:2020 Hardmetals - Metallographic determination of microstructure - Part 2: Measurement of WC grain size (ISO 4499-2:2020)
  • OENORM EN 17289-2-2021 Characterization of bulk materials - Determination of a size-weighted fine fraction and crystalline silica content - Part 2: Calculation method
  • ONORM ISO 3040:1992 Technical drawings - Dimensioning and tolerancing - Cones

工业和信息化部, Crystal Size and Grain Size

  • SJ/T 11459.7.1-2014 Liquid crystal display device Part 7-1: Passive LCD display shape and preferred window size series

American National Standards Institute （ANSI), Crystal Size and Grain Size

  • ANSI B74.16-2002 Checking the Size of Diamond and Cubic Boron Nitride Abrasive Grain

The American Road & Transportation Builders Association, Crystal Size and Grain Size

  • AASHTO T 219-1987 Standard Method of Test for Testing Lime for Chemical Constituents and Particle Sizes

PL-PKN, Crystal Size and Grain Size

  • PN-EN 17289-3-2021-05 E Characterization of bulk materials -- Determination of a size-weighted fine fraction and crystalline silica content -- Part 3: Sedimentation method
  • PN W49301-1973 Martime budy topmarki Shapes and dimensions
  • PN T06407-1962 Electronic fubes. Octal bases and shells. Dimensions
  • PN-EN 17289-1-2021-05 E Characterization of bulk materials -- Determination of a size-weighted fine fraction and crystalline silica content -- Part 1: General information and choice of test methods
  • PN BN 8770-04-1967

CH-SNV, Crystal Size and Grain Size

  • SN EN 17289-2-2021 Characterization of bulk materials - Determination of a size-weighted fine fraction and crystalline silica content - Part 2: Calculation method

International Code Council, Crystal Size and Grain Size

ZA-SANS, Crystal Size and Grain Size

SE-SIS, Crystal Size and Grain Size

TR-TSE, Crystal Size and Grain Size

  • TS 2318-1976 TECHNICAL DRAWINGS DIMENSIONING AND TOLERANCING CONES

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Crystal Size and Grain Size

  • PREN 4061-1994 Aerospace Series Filler Metal for Brazing Amorphous Foil Thickness 25 Micrometer Less Than or Equal to a Less Than or Equal to 65 Micrometer Dimensions

Professional Standard - Machinery, Crystal Size and Grain Size

KR-KS, Crystal Size and Grain Size

  • KS V ISO 12215-5-2022 Small craft — Hull construction and scantlings — Part 5: Design pressures, design stresses and scantlings determination for monohulls

(U.S.) Ford Automotive Standards, Crystal Size and Grain Size

  • FORD WSS-M2A177-A2-2014 ALUMINUM ALLOY, EXTRUSION, HEAT TREATABLE, SEAMLESS, HIGH STRENGTH, GRAIN SIZE CONTROLLED ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2A177-A1)
  • FORD WSS-M2A177-A2-2012 ALUMINUM ALLOY, EXTRUSION, HEAT TREATABLE, SEAMLESS, HIGH STRENGTH, GRAIN SIZE CONTROLLED ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M2A177-A1
  • FORD WSS-M2A177-A4-2014 ALUMINUM ALLOY, EXTRUSION, HEAT TREATABLE, SEAMLESS, MODERATE STRENGTH AND FORMABILITY, GRAIN SIZE CONTROLLED ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2A177-A1)

CU-NC, Crystal Size and Grain Size

  • NC 43-12-1968 Particle boards and fibre boards Method of determination of water absorption and swelling in thickness after total inmersion in water

ES-AENOR, Crystal Size and Grain Size

NL-NEN, Crystal Size and Grain Size

  • NEN-EN 284-1993 Swap bodies. Swap bodies of class C. Dimensions and general requirements

Malaysia Standards, Crystal Size and Grain Size

  • MS 1064 Pt.8-2001 Guide to modular coodination in buildings:Part 8:Coordinating sizes and preferred sizes for masonry bricks and blocks

BE-NBN, Crystal Size and Grain Size

  grain size and, Particle Size and Grain Size, Grain Size and Particle Size, Grain Size and Particle Size, Grain Size and Grain Size, Grain Size and Particle Size, Grain Size and Grain Size, Grain and Phase Sizes, Grain Size and Particles, Crystal Size and Grain Size, Grain Size vs. Crystal Size, Half width and grain size, crystal grain size, Grain size and half width.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved