ZH
RU
ES

Composition of plastic products

Composition of plastic products, Total:495 items.

In the international standard classification, Composition of plastic products involves: Tobacco, tobacco products and related equipment, Materials and articles in contact with foodstuffs, Wastes, Plastics, Company organization and management, Welding, brazing and soldering, Rubber and plastics products, Protection against fire, Aircraft and space vehicles in general, Conducting materials, Cutting tools, Metrology and measurement in general, Pipeline components and pipelines, Analytical chemistry, Graphical symbols, Bearings, Rubber, Cellular materials, Hand-held tools, Shipbuilding and marine structures in general, Fluid storage devices, Equipment for the chemical industry, Equipment for the rubber and plastics industries, Chipless working equipment, Environmental protection, Paints and varnishes, Reinforced plastics, Protection against dangerous goods, Manufacturing forming processes, Raw materials for rubber and plastics, Packaging materials and accessories, Installations in buildings, Wood-based panels, Barrels. Drums. Canisters, Packaging and distribution of goods in general, Vocabularies.

Professional Standard - Tobacco, Composition of plastic products

YC/T 235.5-2007 General tolerances- Part 5: Plastic piece made from plastic semi-manufactured goods

German Institute for Standardization, Composition of plastic products

DIN EN 1186-11:2002 Materials and articles in contact with foodstuffs - Plastics - Part 11: Test methods for overall migration into mixtures of <(hoch)14>C-labelled synthetic triglycerides; German version EN 1186-11:2002
DIN 7708-1:1980 Plastic Moulding Materials; Plastic Products; Concepts
DIN CEN/TS 16011:2013-04*DIN SPEC 91011:2013-04 Plastics - Recycled plastics - Sample preparation; German version CEN/TS 16011:2013
DIN EN ISO 294-5:2018-03 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy (ISO 294-5:2017); German version EN ISO 294-5:2017
DIN EN ISO 293:2023-06 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023); German version EN ISO 293:2023
DIN 16922:1981 Flexible sheet materials manufactured using plastics; technological classification
DIN EN ISO 294-3:2020-11 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020); German version EN ISO 294-3:2020
DIN EN ISO 294-4:2019-04 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2018); German version EN ISO 294-4:2019
DIN EN 15860:2018 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
DIN 10457:1988-02 Apparatus for dairy analysis; sample bottles of plastic for milk
DIN 53497:2017-04 Testing of plastics - Hot storage test on mouldings made of thermoplastic moulding materials without external mechanical stressing
DIN EN ISO 527-2:2012 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012); German version EN ISO 527-2:2012
DIN EN 15534-1:2018-02 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products; German version EN 15534-1:2014+A1:...
DIN EN 15534-5:2014-04 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles; German version EN 15534-5:2014 / Note: To be re...
DIN EN ISO 24023-2:2020-08 Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 24023-2:2020); German version EN ISO 24023-2:2020
DIN EN ISO 13000-2:2021-11 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:2021); German version EN ISO 13000-2:2021
DIN EN ISO 294-2:2019-03 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:2018); German version EN ISO 294-2:2018
DIN CEN/TS 13130-17:2005-05 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 17: Determination of carbonyl chloride in plastics; German version CEN/TS 13130-17:2005
DIN 53733:1976 Testing of Plastics; Size Reduction of Plastic Products for Test Purposes
DIN 53733:2021 Testing of plastics - Size reduction of plastic products for test purposes
DIN 53733:2015 Testing of plastics - Size reduction of plastic products for test purposes
DIN EN ISO 21306-2:2019-07 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21306-2:2019); German version EN ISO 21306-2:2019
DIN EN 12814-8:2023-08 Testing of welded joints of thermoplastics semi-finished products - Part 8: Requirements; German and English version prEN 12814-8:2023 / Note: Date of issue 2023-06-30*Intended as replacement for DIN EN 12814-8 (2021-03).
DIN EN 12814-8:2021-03 Testing of welded joints of thermoplastics semi-finished products - Part 8: Requirements; German version EN 12814-8:2021
DIN 86128-3:2021 Pipe couplings – Part 3: Pipe couplings intended for connecting pipes and fittings made of plastic-plastic/plastic-metal
DIN EN ISO 21970-2:2019-12 Plastics - Polyketone (PK) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21970-2:2019); German version EN ISO 21970-2:2019
DIN EN 15860:2010 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods; German version EN 15860:2010
DIN EN 13130-8:2004-08 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 8: Determination of isocyanates in plastics; German version EN 13130-8:2004
DIN EN 13130-4:2004-08 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 4: Determination of 1,3-butadiene in plastics; German version EN 13130-4:2004
DIN 86128-3:2021-04 Pipe couplings Part 3: Pipe couplings intended for connecting pipes and fittings made of plastic-plastic/plastic-metal
DIN EN 12814-2:2021-08 Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test; German version EN 12814-2:2021
DIN EN ISO 16396-2:2022-10 Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2022); German version EN ISO 16396-2:2022
DIN EN ISO 19069-2:2020-01 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19069-2:2016); German version EN ISO 19069-2:2016 / Note: To be replaced by DIN EN ISO 19069-2 (2023-02).
DIN EN ISO 20557-2:2018-12 Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 2: Preparation of test specimen and determination of properties (ISO 20557-2:2018); German version EN ISO 20557-2:2018
DIN EN ISO 17855-2:2020-01 Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 17855-2:2016); German version EN ISO 17855-2:2016
DIN EN 13130-6:2004-08 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 6: Determination of vinylidene chloride in plastics; German version EN 13130-6:2004
DIN CEN/TS 13130-20:2005-05 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 20: Determination of epichlorohydrin in plastics; German version CEN/TS 13130-20:2005
DIN EN ISO 10724-1:2002-04 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 1: General principles and moulding of multipurpose test specimens (ISO 10724-1:1998); German version EN ISO 10724-1:2001
DIN EN 17228:2018 Plastics - Bio-based polymers, plastics, and plastic products - Terminology, characteristics and communication; German and English version prEN 17228:2018
DIN EN 17228:2019 Plastics - Bio-based polymers, plastics, and plastics products - Terminology, characteristics and communication
DIN EN 17228:2019-06 Plastics - Bio-based polymers, plastics, and plastics products - Terminology, characteristics and communication; German version EN 17228:2019
DIN 7742-1:1988-01 Plastic moulding materials; cellulose ester(CA, CP, CAB) thermoplastic moulding materials; classification and designation
DIN EN ISO 295:2004-05 Plastics - Compression moulding of test specimens of thermosetting materials (ISO 295:2004); German version EN ISO 295:2004
DIN EN ISO 10210:2018-02 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials (ISO 10210:2012); German version EN ISO 10210:2017
DIN EN 12814-5:2000 Testing of welded joints of thermoplastics semi-finished products - Part 5: Macroscopic examination; German version EN 12814-5:2000
DIN EN 12814-1:1999 Testing of welded joints of thermoplastics semi-finished products - Part 1: Bend test; German version EN 12814-1:1999
DIN EN 12814-5:2000-10 Testing of welded joints of thermoplastics semi-finished products - Part 5: Macroscopic examination; German version EN 12814-5:2000
DIN EN 12814-1:1999-12 Testing of welded joints of thermoplastics semi-finished products - Part 1: Bend test; German version EN 12814-1:1999
DIN EN 12814-4:2018-08 Testing of welded joints of thermoplastics semi-finished products - Part 4: Peel test; German version EN 12814-4:2018+AC:2018
DIN EN ISO 20558-2:2019-06 Plastics - Poly(phenylene sulfide) (PPS) moulding and extrusion materials - Part 2: Preparation of test specimen and determination of properties (ISO 20558-2:2018); German version EN ISO 20558-2:2019
DIN EN ISO 21305-2:2019-05 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21305-2:2019); German version EN ISO 21305-2:2019
DIN EN ISO 24022-2:2020-09 Plastics - Polystyrene (PS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 24022-2:2020); German version EN ISO 24022-2:2020
DIN EN ISO 23153-2:2020-05 Plastics - Polyetheretherketone (PEEK) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 23153-2:2020); German version EN ISO 23153-2:2020
DIN EN 15860:2012 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods; German version EN 15860:2010
DIN EN ISO 21302-2:2019-09 Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21302-2:2019); German version EN ISO 21302-2:2019
DIN CEN/TS 16011:2013 Plastics - Recycled plastics - Sample preparation; German version CEN/TS 16011:2013
DIN EN 12814-3:2014-07 Testing of welded joints of thermoplastics semi-finished products - Part 3: Tensile creep test; German version EN 12814-3:2014
DIN EN 12814-6:2000-03 Testing of welded joints of thermoplastics semi-finished products - Part 6: Low temperature tensile test; German version EN 12814-6:2000
DIN CEN/TS 13130-22:2005-05 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 22: Determination of ethylene oxide and propylene oxide in plastics; German version CEN/TS 13130-22:2005
DIN 40607:1967 Laminated Products; Tubes, Rolled, Not Moulded, of Laminated Paper or Laminated Fabric
DIN EN ISO 19064-2:2020-07 Plastics - Styrene-acrylonitrile (SAN) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19064-2:2020); German version EN ISO 19064-2:2020
DIN EN 14063-1:2004-11 Thermal insulation materials and products - In-situ formed expanded clay lightweight aggregate products (LWA) - Part 1: Specification for the loose-fill products before installation; German version EN 14063-1:2004 / Note: To be replaced by DIN EN 14063...
DIN EN 13100-1:2017 Non destructive testing of welded joints of thermoplastics semi-finished products - Part 1: Visual examination
DIN EN 12814-6:2000 Testing of welded joints of thermoplastics semi-finished products - Part 6: Low temperature tensile test; German version EN 12814-6:2000
DIN EN 13100-4:2013-01 Non destructive testing of welded joints of thermoplastics semifinished products - Part 4: High voltage testing; German version EN 13100-4:2012
DIN EN 13100-1:2017-08 Non destructive testing of welded joints of thermoplastics semi-finished products - Part 1: Visual examination; German version EN 13100-1:2017
DIN EN 13100-1:2000 Non destructive testing of welded joints of thermoplastics semi-finished products - Part 1: Visual examination; German version EN 13100-1:1999

Hainan Provincial Standard of the People's Republic of China, Composition of plastic products

DB46/T 557-2021 Detection of Non-biodegradable Components in Single-Use Plastic Products by Infrared Spectroscopy and Pyrolysis-Gas Chromatography/Mass Spectrometry

Underwriters Laboratories (UL), Composition of plastic products

UL 2778-2011 Products made from recycled plastic
UL PLASTICS RECOGNIZED-2012 PLASTICS RECOGNIZED COMPONENT DIRECTORY

Association of German Mechanical Engineers, Composition of plastic products

DVS 2201-1-1988
VDI 3822 Blatt 2.1.1-2012 Failure analysis - Defects of thermoplastic products made of plastics caused by faulty design
VDI 3822 Blatt 2.1.8-2012 Failure analysis - Defects of thermoplastic products made of plastics caused by weather-induced stress
DVS 2216-6-2002 Ultrasonic joining of mouldings and semi-finished products made of amorphous thermoplastics in series fabrication
DVS 2216-6-2013 Ultrasonic joining of mouldings and semi-finished products made of amorphous thermoplastics in series fabrication
VDI 3822 Blatt 2.1.3-2012 Failure analysis - Defects of thermoplastic products made of plastics caused by an unfavourable choice of material and by defects in the material
DVS 2201-1 Beiblatt 1-2003 Testing of semifinished products made of thermoplastics - Basics - Indications; Material and material short cuts
DVS 2201-1 Beiblatt 1-2004 Testing of semi-finished products made of thermoplastics - Basics - Indications - Material and abbreviation
VDI 3822 Blatt 2.1.2-2012 Failure analysis - Defects of thermoplastic products made of plastics caused by faulty processing
VDI 3822 Blatt 2.1.9-2012 Failure analysis - Defects of thermoplastic products made of plastics caused by microbial stress
DVS 2218-3-2006 Welding of thermoplastics in series fabrication - Rotational friction welding of mouldings and semi-finished products made of polyamides (PAs)
DVS 2201-1 Beiblatt 4-2003 Testing of semifinished products made of thermoplastics - Basics - Indications; Dimension stability of semi-finished material after heating
DVS 2216-6-2001
DVS 2201-1 Beiblatt 4-2004 Testing of semi-finished products made of thermoplastics - Basics - Indications - Dimension stability of semi-finished material after heating
DVS 2215-3-1999 Hot plate welding of mouldings made from amorphous thermoplastics in volume production
VDI 2541-1975 Friction bearings made from thermoplastics
DVS 2201-1 Beiblatt 3-2004 Testing of semi-finished products made of thermoplastics - Basics - Indications - Linear thermal expansion coefficients
DVS 2201-1 Beiblatt 3-2003 Testing of semifinished products made of thermoplastics - Basics - Indications; Linear thermal expansion coefficients
DVS 2205-1 Beiblatt 10-2001
DVS 2205-1 Beiblatt 9-2005 Calculation of tanks and apparatus made of thermoplastics - Reduction coefficients A1 for moulding materials made of PVC-C
DVS 2205-1 Beiblatt 14-2004
DVS 2205-1 Beiblatt 9-2004
DVS 2205-1 Beiblatt 14-2005 Calculation of tanks and apparatus made of thermoplastics - Reduction coefficients A1 for moulding materials made of PVC-U
DVS 2216-4-1991
DVS 2218-3-2005
DVS 2201-1 Beiblatt 2-2003 Testing of semifinished products made of thermoplastics - Basics - Indications; Directives for creep rupture curves of pipes
DVS 2201-1 Beiblatt 2-2004 Testing of semi-finished products made of thermoplastics - Basics - Indications - Directives for creep rupture curves of pipes
DVS 2216-5-1995
DVS 2217-1-1992
DVS 2217-1-1998
DVS 2280-2010 DVS® foundation course about the processing of semi-finished products made of thermoplastics
DVS 2201-1-1989 Testing of semifinished products of thermoplastics - Bases - indications
VDI 3822 Blatt 2.1.6-2012 Failure analysis - Defects of thermoplastic products made of plastics caused by tribology-induced stress
DVS 2216-3-1991
DVS 2215-3 Beiblatt 1-1999 Hot plate welding of mouldings made from amorphous thermoplastics in volume production - Welding parameters for amorphous thermolastics and blends
DVS 2205-1 Beiblatt 21-2008 Calculation of tanks and apparatus made of thermoplastics - Creep strength for pipes made of PTFE
DVS 2205-1 Beiblatt 18-2006 Calculation of tanks and apparatus made of thermoplastics - Creep curves for pipes made of ECTFE
DVS 2205-1 Beiblatt 12-2001
DVS 2205-1 Beiblatt 18-2004
DVS 2216-2-1991
DVS 2217-1-1999 Vibration welding of mouldings and semi-finished products made ot thermoplastic polymers in series production
DVS 2205-1 Beiblatt 5-1997
DVS 2205-1 Beiblatt 10-2005 Calculation of tanks and apparatus made of thermoplastics - Reduction coefficients A1 for moulding materials made of PP
DVS 2216-1-1991
DVS 2205-1-2013 Calculation of tanks and apparatus made of thermoplastics - Characteristic values
DVS 2205-1-2011 Calculation of tanks and apparatus made of thermoplastics - Characteristic values
DVS 2217-2-2002 Vibration welding of moldings and semi-finished products made of thermoplasic polymers in series production - Moldings made of polyamides
DVS 2205-1 Beiblatt 25-2007 Calculation of tanks and apparatus made of thermoplastics - Creep strength for pipes made of PVDF copolymer

RO-ASRO, Composition of plastic products

STAS 6572-1968
STAS 5870-1973 Plaslics SIEVE ANALYSIS
STAS 5874-1983 PLASTICS Determination of flexural propertie? of rigid plastics
STAS 4627-1975 PLASTICS EARMARKS FOR ANIMALS
STAS 6572/1-1979 Plastics THERMOPLASTICS SPECIMENS MOULDING BY INJECTION General specifications
STAS 6572/2-1979 Plastics THERMOPLASTICS SPECIMENS MOULDING BY COMPRESSION General specifications
STAS 6127-1987 PLASTICS Tear strength determinatiQn of plastic flexible sheets
STAS 6216-1980 PLASTIGS Determination of loss of plasticizers Activated carbon method
STAS 6129-1980 PLASTICS Determination of frost brittle point of foils and plates of thermosetting materials
STAS 5873-1983 PLASTIC S Determination of compression characteristics
STAS 5794-1980 PLASTICS staudard atnlospheres for conditioning and testing

International Organization for Standardization (ISO), Composition of plastic products

ISO 294-2:2018 Plastics — Injection moulding of test specimens of thermoplastic materials — Part 2: Small tensile bars
ISO/TS 15791-2:2017 Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 2: Use of intermediate-scale tests for semi-finished and finished products
ISO/TS 15791-2:2022 Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 2: Use of intermediate-scale tests for semi-finished and finished products
ISO 23559:2011 Plastics - Film and sheeting - Guidance on the testing of thermoplastic films
ISO 11752:2000 Flexible cellular polymeric materials - Moulded and extruded sponge or expanded cellular rubber products - Compressibility test on finished parts
ISO 16869:2008 Plastics - Assessment of the effectiveness of fungistatic compounds in plastics formulations
ISO/DIS 4484-2.2 Textiles and textile products — Microplastics from textile sources — Part 2: Qualitative and quantitative analysis of microplastics
ISO 13000-2:2005 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties
ISO 13000-2:2021 Plastics — Polytetrafluoroethylene (PTFE) semi-finished products — Part 2: Preparation of test specimens and determination of properties
ISO 10210:2012 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials
ISO 13106:2014 Plastics - Blow-moulded polypropylene containers for packaging of liquid foodstuffs
ISO 3994:1977 Plastics products; Hose of polymer reinforced thermoplastics for suction and discharge
ISO 8986-2:1995 Plastics - Polybutene (PB) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 1043-2:2011 Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials

U.S. Military Regulations and Norms, Composition of plastic products

ARMY MIL-HDBK-700 A-1975 PLASTICS
ARMY MIL-P-14571 A-1960 PLASTIC, POLYSTYRENE, MODIFIED; FABRICATED PARTS

IL-SII, Composition of plastic products

S.I.333/1-1972 TOOTHBRUSHES MADE OF PLASTOMERS

Association Francaise de Normalisation, Composition of plastic products

NF T51-080:1999 Plastics. Measurement of resistivity of conductive plastics.
XP T50-810*XP CEN/TS 16011:2013 Plastics - Recycled plastics - Sample preparation
XP CEN/TS 16011:2013 Plastiques - Plastiques recyclés - Préparation des échantillons
NF EN ISO 294-5:2017 Plastiques - Moulage par injection des éprouvettes de matériaux thermoplastiques - Partie 5 : préparation d'éprouvettes normalisées pour déterminer l'anisotropie
NF T50-060:2000 Plastics - Generic identification and marking of plastics products.
NF EN ISO 293:2023 Plastiques - Moulage par compression des éprouvettes en matières thermoplastiques
NF L18-510/AM1:1975 Sheets made of transparent plastics material.
NF T51-005-2:1996 Plastics. Determination of temperature of deflection under load. Part 2 : plastics and ebonite.
NF T54-411*NF EN 15860:2018 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
NF T56-101:1976 ELASTOMER OR PLASTICS BASED CELLULAR PRODUCTS. COMPRESSION TEST ON RIGID MATERIALS.
NF T54-002:1981 Plastics. Thermoplastics parts of piping. Definitions. Dimensions.
NF T51-116-2*NF EN ISO 6603-2:2002 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2 : instrumented puncture test
NF EN ISO 294-2:2018 Plastiques - Moulage par injection des éprouvettes de matériaux thermoplastiques - Partie 2 : Barreaux de traction de petites dimensions
NF T53-035:1981 Plastics. Amorphous thermoplastic moulding materials. Determination of post-shrinkage of test specimens.
NF T51-150*NF EN 1122:2001 Plastics - Determination of cadmium - Wet decomposition method
NF T50-060*NF EN ISO 11469:2016 Plastics - Generic identification and marking of plastics products
NF EN ISO 11469:2016 Plastiques - Identification générique et marquage des produits en matière plastique
NF T51-116-1*NF EN ISO 6603-1:2000 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1 : non-instrumented impact testing
NF T51-034-2:1996 Plastics. Determination of tensile properties. Part 2 : test conditions for moulding and extrusion plastics.
NF EN ISO 13000-2:2021 Plastiques - Semi-produits en polytétrafluoroéthylène (PTFE) - Partie 2 : préparation des éprouvettes et détermination des propriétés
NF T51-067:1983 Plastics. Optical properties.
NF T51-550-2:2006 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2 : preparation of test specimens and determination of properties.
NF T51-143:1974 Plastics. Filled polyamides. Determination of percentages of graphite or carbon black and fiber glass.
XP D25-201-17*XP CEN/TS 13130-17:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 17 : determination of carbonyl chloride in plastics
NF T51-351:1985 Plastics. Determination of ash. Unplasticized cellulose acetate.
NF T51-018:1981 Plastics. Modulus of longitudinal elasticity of rigid plastics.
NF A89-810-8:2002 Testing of welded joints of thermoplastics semi-finished products - Part 8 : requirements.
NF A89-810-8:2021 Testing of welded joints of thermoplastics semi-finished products - Part 8 : requirements
NF T56-102:1976 Elastomer or plastics based cellular products. Bending test on rigid cellular materials.
XP CEN/TS 13130-17:2005 Matériaux et objets en contact avec les denrées alimentaires - Substances dans les matières plastiques soumises à des limitations - Partie 17 : détermination du chlorure de carbonyle dans les matières plastiques
NF T51-012:1957 Plastics. Determination of bulk factor of moulding materials.
NF T50-050-3:1999 Plastics. Symbols and abbreviated terms. Part 3 : plasticizers.
NF T54-422:2003 Plastics - Mulching thermoplastic films for use in agriculture and horticulture.
NF T54-022:1980 Plastics. Thermoplastic pipes and fittings. Determination of specific gravity.
NF T54-504:1976 Light plastics products. Bending test.
NF EN ISO 16396-2:2022 Plastiques - Matériaux à base de polyamide (PA) pour moulage et extrusion - Partie 2 : préparation des éprouvettes et détermination des propriétés
XP D25-201-20*XP CEN/TS 13130-20:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 20 : determination of epichlorohydrin in plastics
NF EN 13130-4:2004 Matériaux et objets en contact avec les denrées alimentaires - Substances dans les matières plastiques soumises à des limitations - Partie 4 : détermination du 1,3-butadiène dans les matières plastiques
NF EN 13130-8:2004 Matériaux et objets en contact avec les denrées alimentaires - Substances dans les matières plastiques soumises à des limitations - Partie 8 : détermination des isocyanates dans les matières plastiques
NF T51-025:1999 Plastics. Determination of migration of plasticizers.
NF T52-115:1985 Plastics. Basic materials for polyurethanes. Polyethers and polyesters. Determination of water.
NF T51-799*NF EN 17228:2019 Plastics - Bio-based polymers, plastics, and plastic products - Terminology, characteristics and communication
NF D11-120:1988 Specification for finished baths for domestic purposes made of acrylic material.
NF EN 13130-6:2004 Matériaux et objets en contact avec les denrées alimentaires - Substances dans les matières plastiques soumises à des limitations - Partie 6 : détermination du chlorure de vinylidène dans les matières plastiques
NF T58-001:1997 Plastics. Preparation of test specimens by machining.
NF T51-550-2*NF EN ISO 13000-2:2021 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2 : preparation of test specimens and determination of properties
NF T51-294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4 : determination of moulding shrinkage.
NF T51-809*NF EN ISO 10210:2017 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials
NF EN ISO 10210:2017 Plastiques - Méthodes de préparation des échantillons pour les essais de biodégradation des matériaux plastiques
NF A89-810-4:2002 Testing of welded joints of thermoplastics semi-finished products - Part 4 : peel test.
NF A89-810-4*NF EN 12814-4:2018 Testing of welded joints of thermoplastics semi-finished products - Part 4 : peel test
NF A89-810-5*NF EN 12814-5:2000 Testing of welded joints of thermoplastics semi-finished products - Part 5 : macroscopic examination
NF EN 12814-2:2021 Essais des assemblages soudés sur produits semi-finis en thermoplastiques - Partie 2 : essai de traction
NF EN ISO 23153-2:2020 Plastiques - Matériaux à base de polyétheréthercétone (PEEK) pour moulage et extrusion - Partie 2 : préparation des éprouvettes et détermination des propriétés
NF T51-045-4*NF EN ISO 3451-4:2000 Plastics - Determination of ash - Part 4 : polyamides
NF T58-300-1:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1 : test methods for characterisation of compounds and products
NF T51-113:1976 Plastics. Determination of the resistance to scratching.
NF T51-115:1982 Plastics. Determination of resistance to abrasion.
NF T51-440*NF EN ISO 10082:2000 Plastics - Phenolic resins - Classification and test methods.
NF T51-024-1*NF EN ISO 2039-1:2003 Plastics - Determination of hardness - Part 1 : ball indentation method
NF T56-200:1988 Plastics. Rigid cellular materials in the form of sheets. Specification plan.
NF T53-051-2:2007 Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties.
NF T57-530:1991 Plastics. Prepregs. Bulk moulding compound (bmc) and dough moulding compound (dmc). Basis for a specification.
NF EN ISO 16135:2006 Robinetterie industrielle - Robinets à tournant sphérique en matériaux thermoplastiques
NF EN ISO 16139:2006 Robinetterie industrielle - Robinets-vannes en matériaux thermoplastiques
NF EN 15860:2018 Matières plastiques - Produits semi-finis thermoplastiques pour usinage - Exigences et méthodes d'essai
NF D25-201-8*NF EN 13130-8:2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 8 : determination of isocyanates in plastics
XP D25-201-22*XP CEN/TS 13130-22:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 22 : determination of ethylene oxide and propylene oxide in plastics
NF T50-001-2:1996 Plastics. Polyamide (pa) moulding and extrusion materials. Part 2 : preparation of test specimens and determination of properties.
NF EN ISO 29988-2:2018 Plastiques - Matériaux à base de polyoxyméthylène (POM) pour moulage et extrusion - Partie 2 : préparation des éprouvettes et détermination des propriétés
NF T52-117:1985 Plastics. Base materials for polyurethanes. Polyethers. Determining of the cloud point.
NF T51-021:1997 Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST).
NF T54-111:1971 Transparent sheets of polyethylene. Determination of the haze.
NF A89-810-3/A1:2006 Testing of welded joints of thermoplastics semi-finished products - Part 3 : tensile creep test.
NF A89-811-1*NF EN 13100-1:2017 Non destructive testing of welded joints of thermoplastics semi-finished products - Part 1 : visual examination
NF EN 12814-3:2014 Essais des assemblages soudés sur produits semi-finis en thermoplastiques - Partie 3 : essai de fluage en traction
NF EN 12814-6:2000 Essais des assemblages soudés sur produits semi-finis en thermoplastiques - Partie 6 : essai de traction à basse température
NF T56-123:1974 Cellular products of elastomer or plastics. Determination of water absorption of cellular materials over a given period of time.

RU-GOST R, Composition of plastic products

GOST 15948-1976 Thread-forming pieces for moulding metric thread in plastic articles. Size calculation
GOST 15947-1970 Smooth forming pieces for moulding plastic articles. Method of size calculation

BELST, Composition of plastic products

STB 1015-97 Household and consumer products made of plastics. General specifications
STB 1156-99 Furniture made of plastics. General specifications
STB 1064-97 Floor tiles from thermoplastic material. Composites. Specifications

IT-UNI, Composition of plastic products

UNI 6663-1970
UNI 6664-1970
UNI EN 12814-8-2021 Testing of welded joints of thermoplastics semi-finished products - Part 8: Requirements
UNI EN ISO 13000-2:2021 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties
UNI EN 12814-2-2021 Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test

Danish Standards Foundation, Composition of plastic products

DS/CEN/TS 16011:2013 Plastics - Recycled plastics - Sample preparation
DS/EN 15860:2010 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
DS/EN ISO 11469:2000 Plastics - Generic identification and marking of plastics products
DS/EN 12814-8:2021 Testing of welded joints of thermoplastics semi-finished products – Part 8: Requirements
DS/ISO 13000-2:2021 Plastics – Polytetrafluoroethylene (PTFE) semi-finished products – Part 2: Preparation of test specimens and determination of properties
DS/CEN/TS 13130-17:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 17: Determination of carbonyl chloride in plastics
DS/EN 12814-8/AC:2003 Testing of welded joints of thermoplastics semi-finished products - Part 8: Requirements
DS/EN 12814-8:2001 Testing of welded joints of thermoplastics semi-finished products - Part 8: Requirements
DS/EN 13130-4:2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 4: Determination of 1,3-butadiene in plastics
DS/EN 13130-8:2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 8: Determination of isocyanates in plastics
DS/EN 12814-2:2021 Testing of welded joints of thermoplastics semi-finished products – Part 2: Tensile test
DS/CEN/TS 13130-20:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 20: Determination of epichlorohydrin in plastics
DS/EN 13130-6:2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 6: Determination of vinylidene chloride in plastics
DS/EN 14233:2003 Materials and articles in contact with foodstuffs - Plastics - Temperature at the plastics/food interface - Determination of temperature of plastics and materials and articles at the plastics/food interface during microwave and conventional oven heating i
DS/EN ISO 13000-2:2006 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties
DS/EN 12814-1/AC:2003 Testing of welded joints of thermoplastics semi-finished products - Part 1: Bend test
DS/EN 12814-1:2000 Testing of welded joints of thermoplastics semi-finished products - Part 1: Bend test
DS/EN 12814-2:2000 Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test
DS/EN 12814-4:2001 Testing of welded joints of thermoplastics semi-finished products - Part 4: Peel test
DS/EN 12814-5:2000 Testing of welded joints of thermoplastics semi-finished products - Part 5: Macroscopic examination
DS/EN 12814-6:2000 Testing of welded joints of thermoplastics semi-finished products - Part 6: Low temperature tensile test
DS/CEN/TS 13130-22:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 22: Determination of ethylene oxide and propylene oxide in plastics
DS/EN ISO 13000-2:2021 Plastics – Polytetrafluoroethylene (PTFE) semi-finished products – Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:2021)
DS/EN 12814-3/A1:2005 Testing of welded joints of thermoplastics semi-finished products - Part 3: Tensile creep test
DS/EN 12814-3:2000 Testing of welded joints of thermoplastics semi-finished products - Part 3: Tensile creep test
DS/EN 13100-1:2000 Non destructive testing of welded joints of thermoplastics semi-finished products - Part 1: Visual examination
DS/EN 13100-4:2012 Non destructive testing of welded joints of thermoplastics semifinished products - Part 4: High voltage testing

European Committee for Standardization (CEN), Composition of plastic products

PD CEN/TS 16011:2013 Plastics - Recycled plastics - Sample preparation
EN ISO 527-2:2012 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)
DD ENV 13130-8-1999 Materials and Articles in Contact with Foodstuffs - Plastics Substances Subject to Limitation - Part 8: Determination of Isocyanates in Plastics
EN 15860:2010 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
EN 15860:2018 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
EN ISO 13000-2:1997 Plastics - Polytetrafluoroethylene (PTFE) Semi-Finished Products - Part 2: Preparation of Specimens and Determination of Properties ISO 13000-2:1997
EN ISO 13000-2:2021 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:2021)
EN ISO 10210:2017 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials
EN 12814-2:2000 Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test
EN 12814-2:2021 Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test
prEN 23994-1992 Plastic products; hose of polymer reinforced thermoplastics for suction and discharge (ISO 3994:1977)
PD CEN/TS 13130-17:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 17: Determination of carbonyl chloride in plastics
EN ISO 7792-2:2012 Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
EN 13100-1:1999 Non Destructive Testing of Welded Joints of Thermoplastics Semi-Finished Products - Part 1: Visual Examination
EN 12814-6:2000 Testing of welded joints of thermoplastics semi-finished products - Part 6: Low temperature tensile test
EN 13100-1:2017 Non destructive testing of welded joints of thermoplastics semi-finished products - Part 1: Visual examination

AENOR, Composition of plastic products

UNE-CEN/TS 16011:2015 EX Plastics - Recycled plastics - Sample preparation
UNE 53206:2012 Plastics. Large plastic bags made with plastic films. Characteristics and test methods
UNE-EN 15860:2011 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
UNE-CEN/TS 13130-17:2006 EX Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 17: Determination of carbonyl chloride in plastics
UNE-EN 12814-8:2002 Testing of welded joints of thermoplastics semi-finished products - Part 8: Requirements.
UNE-EN 13130-8:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 8: Determination of isocyanates in plastics
UNE-EN 13130-4:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 4: Determination of 1,3-butadiene in plastics
UNE 53956:2002 IN Plastics. Buried installation of prefabricated swimming pools made from fiber glass reinforced plastics (GRP).
UNE-EN 13130-6:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 6: Determination of vinylidene chloride in plastics
UNE-CEN/TS 13130-20:2006 EX Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 20: Determination of epichlorohydrin in plastics
UNE-EN 12814-1:2000 TESTING OF WELDED JOINTS OF THERMOPLASTICS SEMI-FINISHED PRODUCTS - PART 1: BEND TEST
UNE-EN 12814-4:2002 Testing of welded joints of thermoplastics semi-finished products - Part 4: Peel test.
UNE-EN 12814-2:2001 Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test.
UNE 53246:1981 PLASTICS. DETERMINATION OF DIMENSION STABILITY OF THERMOPLASTIC MOULDED ARTICLES
UNE-EN ISO 294-2:1999 PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS - PART 2: SMALL TENSILE BARS (ISO 294-2:1996)
UNE-CEN/TS 13130-22:2006 EX Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 22: Determination of ethylene oxide and propylene oxide in plastics
UNE-EN 13100-4:2013 Non destructive testing of welded joints of thermoplastics semifinished products - Part 4: High voltage testing
UNE-EN 13100-1:2017 Non destructive testing of welded joints of thermoplastics semi-finished products - Part 1: Visual examination
UNE-EN 12814-6:2001 Testing of welded joints of thermoplastics semi-finished products - Part 6: Low temperature tensile test.
UNE-EN 12814-3:2014 Testing of welded joints in thermoplastics semi-finished products - Part 3: Tensile creep test

Shanghai Provincial Standard of the People's Republic of China, Composition of plastic products

DB31/T 478.19-2014 Water quotas for major industrial products and their calculation methods Part 19: Plastic products (plastic particles, plastic products)

Group Standards of the People's Republic of China, Composition of plastic products

T/CSRA 21-2022 Plastic composition test Polyethylene (PE), polypropylene (PP), polystyrene (PS), polyvinyl chloride (PVC), ethylene-vinyl acetate copolymer (EVA), polyethylene terephthalate in plastic products Esters (PET) Qualitative Analysis Method
T/CAS 265-2017 Rotomolding product—Plastics inspection chamber
T/JYPA 002-2021 Plastic griddles
T/STSJSH 0001-2017 Daily plastic products
T/QGCML 863-2023 Plastic waste cutting table
T/CPPIA 17-2022 Antibacterial daily plastic products
T/QGCML 878-2023 Plastic product processing device
T/CSRA 20-2022 Quantitative analysis method for degradable plastics in plastic composition test
T/CAMMT 22-2019 Additive manufacturing – Plastic filament extrusion
T/ZZB 1650-2020 Multi-component plastics injection moulding machines
T/CPMIA 0102-2020 Multi-component plastics injection moulding machine
T/CXSBX 003-2023 Technical Specification for Labeling of Plastic Products Used in Food Contact: Disposable Plastic Tableware

United States Navy, Composition of plastic products

NAVY MIL-M-24519 E-1992 MOLDING PLASTICS, ELECTRICAL, THERMOPLASTIC [Use In Lieu Of: NAVY MIL-M-0024519 A]
NAVY MIL-P-8045 B (4)-1999 PLASTIC, SELF-SEALING AND NON-SELF-SEALING TANK BACKING MATERIAL
NAVY MIL-P-8045 B NOTICE 1-1999 PLASTIC, SELF-SEALING AND NON-SELF-SEALING TANK BACKING MATERIAL
NAVY MIL-P-8045 B-1964 PLASTIC, SELF-SEALING AND NON-SELF-SEALING TANK BACKING MATERIAL

Professional Standard - Machinery, Composition of plastic products

JB/T 53031-1999 Plastic vacuum forming machine product quality classification
JB/T 50018-1999 Plastic injection molding machine product quality classification
JB/T 53119-1999 Plastic pressure molding machine product quality classification
JB/T 53032-1999 Product quality classification of plastic bag making machine
JB/T 53117-1999 Product quality classification of thermosetting plastic injection molding machine
JB/T 3820-2015 Plastics product hydraulic press.Testing of the accuracy
JB/T 3820-1984 Hydraulic press for plastic products Precision
JB/T 53080-1999 Plastic Extrusion Turntable Shoemaking Machine Product Quality Grading

British Standards Institution (BSI), Composition of plastic products

BS ISO 16869:2008 Plastics - Assessment of the effectiveness of fungistatic compounds in plastics formulations
BS ISO 11752:2000 Flexible cellular polymeric materials - Moulded and extruded sponge or expanded cellular rubber products - Compressibility test on finished parts
BS ISO 11752:2001 Flexible cellular polymeric materials - Moulded and extruded sponge or expanded cellular rubber products - Compressibility test on finished parts
BS EN ISO 294-3:2020 Plastics. Injection moulding of test specimens of thermoplastic materials - Small plates
BS EN ISO 294-5:2017 Plastics. Injection moulding of test specimens of thermoplastic materials. Preparation of standard specimens for investigating anisotropy
BS EN 15860:2010 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
BS ISO 11907-1:1998 Plastics - Smoke generation - Determination of the corrosivity of fire effluents - Guidance
PD ISO/TS 15791-2:2022 Plastics. Development and use of intermediate-scale fire tests for plastics products. Use of intermediate-scale tests for semi-finished and finished products
22/30445226 DC BS EN ISO 293. Plastics. Compression moulding of test specimens of thermoplastic materials
BS EN ISO 293:2023 Tracked Changes. Plastics. Compression moulding of test specimens of thermoplastic materials
BS EN 17228:2019 Plastics. Bio-based polymers, plastics, and plastics products. Terminology, characteristics and communication
BS EN ISO 13000-2:2006 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Preparation of test specimens and determination of properties
BS 7225 Sec.2.2:1990 Classification of refractories. Unshaped refractory products. Basic products
BS ISO 11907-2:1996 Plastics - Smoke generation - Determination of the corrosivity of fire effluents - Static method
BS EN ISO 10210:2017 Plastics. Methods for the preparation of samples for biodegradation testing of plastic materials
BS EN ISO 11469:2016 Tracked Changes. Plastics. Generic identification and marking of plastics products
BS 2782-9 Met 902A:1992 Methods of testing plastics. Sampling and test specimen preparation.. Compression moulding test specimens of thermosetting materials
BS EN ISO 294-4:2019 Tracked Changes. Plastics. Injection moulding of test specimens of thermoplastic materials. Determination of moulding shrinkage
BS ISO 13106:2014 Plastics. Blow-moulded polypropylene containers for packaging of liquid foodstuffs
18/30382578 DC BS EN ISO 294-3. Plastics. Injection moulding of test specimens of thermoplastic materials. Part 3. Small plates
19/30392650 DC BS EN 12814-8. Testing of welded joints of thermoplastics semi-finished products. Part 8. Requirements
BS EN ISO 13000-2:2021 Tracked Changes. Plastics. Polytetrafluoroethylene (PTFE) semi-finished products. Preparation of test specimens and determination of properties

Taiwan Provincial Standard of the People's Republic of China, Composition of plastic products

CNS 4395-1978 Compression Moulding Test Specimens of Thermoplastic Materials
CNS 4394-1978 Injection Moulding Test Specimens of Thermoplastic Material

HU-MSZT, Composition of plastic products

CH-SNV, Composition of plastic products

SN 505 460-1990 Testing of Textiles: Simple tensile test for simple and ply yarns in conditioned State
VSM 34161.2-1972
SN EN 12814-8-2021 Testing of welded joints of thermoplastics semi-finished products - Part 8: Requirements
SN EN 12814-2-2021 Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test

PL-PKN, Composition of plastic products

PN M59104-1972 Marking abrasive produc?s
PN M59106-1973 Marking abrasiye products
PN-EN 12814-8-2021-07 E Testing of welded joints of thermoplastics semi-finished products--Part 8: Requirements
PN BN 6353-01-1964
PN BN 6365-01-1965
PN-EN 12814-2-2021-06 E Testing of welded joints of thermoplastics semi-finished products--Part 2: Tensile test
PN BN 6354-02-1965
PN P50555-1992 Wall coverings in roll form. Specification for finished wallpapers, wall vinyls and plastics wallcoverings
PN BN 7111-01-1962
PN BN 6350-01-1965

未注明发布机构, Composition of plastic products

BS EN ISO 294-5:2017(2018) Plastics - Injection moulding of test specimens of thermoplastic materials Part 5 : Preparation of standard specimens for investigating anisotropy
DIN EN ISO 293:2003 Plastics — Compression molding test specimens of thermoplastic materials
DIN EN ISO 294-3:1998 Plastics Injection molding of thermoplastic test specimens Part 3: Small plates
BS EN ISO 10724-1:2001(2002) Plastics — Injection moulding oftest specimens of thermosetting powder moulding compounds (PMCs) — Part1 : Generalprinciples and moulding ofmultipurpose test specimens

Japanese Industrial Standards Committee (JISC), Composition of plastic products

JIS Z 7120:2003 Plastics -- Guideline for the application of Mobius loop to plastic products
JIS K 7137-2:2001 Plastics -- Polytetrafluoroethylene (PTFE) semi-finished products -- Part 2: Preparation of test specimens and determination of properties
JIS K 6828-2:2003 Plastics -- Polymer dispersions -- Determination of white point temperature and minimum film-forming temperature
JIS K 7151:1995 Plastics -- Compression moulding test specimens of thermoplastic materials
JIS A 5390:1993 Plastics spacers for precast concrete
JIS K 6899-2:1996 Plastics -- Symbols -- Part 2: Fillers and reinforcing materials
JIS K 7191-2:1996 Plastics -- Determination of temperature of deflection under load -- Part 2: Plastics and ebonite
JIS K 7364-2:2004 Plastics -- Polyoxymethylene (POM) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 6937-2:2002 Plastics -- Thermoplastic polyester (TP) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties

Society of Automotive Engineers (SAE), Composition of plastic products

SAE AMS3622-1946 PLASTIC MOLDINGS AND EXTRUSIONS Cellulose Acetate
SAE AMS3617A-1976 NYLON PLASTIC MOLDINGS AND EXTRUSIONS
SAE AMS3617B-1984 NYLON PLASTIC MOLDINGS AND EXTRUSIONS
SAE AMS3617C-1991 NYLON PLASTIC MOLDINGS AND EXTRUSIONS
SAE AMS3620-1946 PLASTIC MOLDINGS AND EXTRUSIONS Polystyrene
SAE AMS3620A-1953 PLASTIC MOLDINGS AND EXTRUSIONS Polystyrene
SAE AMS3627A-1977 PLASTIC MOLDINGS AND EXTRUSIONS Methyl Methacrylate, Heat-Resistant
SAE AMS3635-1955 PLASTIC SHEET AND MOLDINGS Cellular, Shock Absorbing
SAE AMS3622A-1954 PLASTIC MOLDINGS AND EXTRUSIONS Cellulose Acetate General Purpose
SAE AMS3624B-1991 PLASTIC MOLDINGS AND EXTRUSIONS, CELLULOSE ACETATE BUTYRATE
SAE AMS3624C-1993 PLASTIC MOLDINGS AND EXTRUSIONS, CELLULOSE ACETATE BUTYRATE
SAE AMS3624A-1953 PLASTIC MOLDINGS AND EXTRUSIONS Cellulose Acetate Butyrate
SAE AMS3624-1946 PLASTIC MOLDINGS AND EXTRUSIONS Cellulose Acetate Butyrate

ES-UNE, Composition of plastic products

UNE-EN ISO 294-4:2019 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2018)
UNE-CEN/TS 17158:2018 Composites made from cellulose based materials and thermoplastics (usually called wood polymer composites (WPC) or natural fibre composites (NFC)) - Determination of particle size of lignocellosic material (Endorsed by Asociación Española de Normaliz...
UNE-EN ISO 24023-2:2021 Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 24023-2:2020)
UNE-EN ISO 13000-2:2022 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:2021)
UNE-EN ISO 21306-2:2020 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21306-2:2019)
UNE-EN 12814-8:2022 Testing of welded joints of thermoplastics semi-finished products - Part 8: Requirements
UNE-EN ISO 21970-2:2020 Plastics - Polyketone (PK) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21970-2:2019)
UNE-EN ISO 20557-2:2019 Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 2: Preparation of test specimen and determination of properties (ISO 20557-2:2018)
UNE-EN 17228:2020 Plastics - Bio-based polymers, plastics, and plastics products - Terminology, characteristics and communication
UNE-EN ISO 10210:2018 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials (ISO 10210:2012)
UNE-EN 12814-1/AC:2003 Testing of welded joints of thermoplastics semi-finished products - Part 1: Bend test
UNE-EN 12814-2:2022 Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test
UNE-EN ISO 23153-2:2021 Plastics - Polyetheretherketone (PEEK) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 23153-2:2020)
UNE-EN ISO 20558-2:2020 Plastics - Poly(phenylene sulfide) (PPS) moulding and extrusion materials - Part 2: Preparation of test specimen and determination of properties (ISO 20558-2:2018)
UNE-EN ISO 294-5:2018 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy (ISO 294-5:2017)
UNE-EN ISO 294-2:2019 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:2018)
UNE-EN ISO 21302-2:2020 Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21302-2:2019)
UNE-EN 15860:2019 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
UNE-EN ISO 19064-2:2021 Plastics - Styrene-acrylonitrile (SAN) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19064-2:2020)
UNE 104424:2015 Synthetic materials. Application. Waterproofing lining systems for tunnels and galleries made out of manufactured thermoplastic sheets of PVC-P

AT-ON, Composition of plastic products

ONORM E 6570-1994 Meter mounting boards made of plastic
OENORM EN 12814-8-2021 Testing of welded joints of thermoplastics semi-finished products - Part 8: Requirements
ONORM E 3906 Blatt.2-1967
OENORM EN 12814-2-2021 Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test
ONORM C 9552 Teil.1-1988 Plastic moulding materials; Polyethylene (PE) moulding materials; Classification and designation
ONORM C 9550 Teil.1-1986 Plastic moulding materials; polypropylene (PP) moulding materials; Classification and designation
ONORM E 3906 Blatt.1-1967

Lithuanian Standards Office , Composition of plastic products

LST EN 15860-2010 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
LST EN 12814-8-2002 Testing of welded joints of thermoplastics semi-finished products - Part 8: Requirements
LST EN 12814-8-2002/AC-2004 Testing of welded joints of thermoplastics semi-finished products - Part 8: Requirements
LST EN 12814-8-2021 Testing of welded joints of thermoplastics semi-finished products - Part 8: Requirements
LST EN 13130-4-2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 4: Determination of 1,3-butadiene in plastics
LST EN 13130-8-2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 8: Determination of isocyanates in plastics
LST EN 13130-6-2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 6: Determination of vinylidene chloride in plastics
LST EN 12814-1-2001 Testing of welded joints of thermoplastics semi-finished products - Part 1: Bend test
LST EN 12814-5-2002 Testing of welded joints of thermoplastics semi-finished products - Part 5: Macroscopic examination
LST EN 12814-4-2002 Testing of welded joints of thermoplastics semi-finished products - Part 4: Peel test
LST EN 12814-2-2000 Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test
LST EN 12814-1-2001/AC-2004 Testing of welded joints of thermoplastics semi-finished products - Part 1: Bend test
LST EN 12814-2-2021 Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test
LST EN 12814-6-2000 Testing of welded joints of thermoplastics semi-finished products - Part 6: Low temperature tensile test
LST EN 13100-1-2002 Non destructive testing of welded joints of thermoplastics semi-finished products - Part 1: Visual examination
LST EN 12814-3-2000 Testing of welded joints of thermoplastics semi-finished products - Part 3: Tensile creep test
LST EN 12814-3-2000/A1-2006 Testing of welded joints of thermoplastics semi-finished products - Part 3: Tensile creep test
LST EN 13100-4-2013 Non destructive testing of welded joints of thermoplastics semifinished products - Part 4: High voltage testing

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Composition of plastic products

GB/T 16288-2008 Marking of plastics products
GB/T 22236-2008 Testing of plastics.Size reduction of plastic products for test purposes
GB/T 5473-2016 Plastics.Phenol formaldehyde mouldings.Detection of free ammonia
GB/T 16288-1996 Marking for plastic packing products recycling

Professional Standard-Ships, Composition of plastic products

CB/T 180-1998 Technology of marine GFRP products hand lay up method
CB 180-1998 Hand lay-up molding process of marine fiberglass reinforced plastic products
CB/T 3825-1998 Material classification and code for rubber,plastic and their products

JSAE - Society of Automotive Engineers of Japan@ Inc., Composition of plastic products

JASO B302-1994 Fuel tanks made of plastic material for passenger cars

IN-BIS, Composition of plastic products

Professional Standard - Aviation, Composition of plastic products

HB/Z 5017-1976 Molding process of thermosetting plastic products
HB/Z 317-1998 Injection molding process of thermosetting plastic products
HB/Z 5017-1996 Molding process of thermosetting plastic products
HB 0-84-1984 Specifications for thermosetting plastic molded products

TR-TSE, Composition of plastic products

TS 785-1969 PLASTICS DETERMINATION OF THE REFRACTIVE INDEX OF TRANSPARENT PLASTICS

Korean Agency for Technology and Standards (KATS), Composition of plastic products

KS M ISO 11469:2018 Plastics — Generic identification and marking of plastics products
KS M ISO 13000-2-2013(2018) Plastics ㅡ Polytetrafluoroethylene (PTFE) semi-finished products ㅡ Part 2: Preparation of test specimens and determination of properties
KS M ISO 13000-2:2013 Plastics ㅡ Polytetrafluoroethylene (PTFE) semi-finished products ㅡ Part 2: Preparation of test specimens and determination of properties
KS M ISO 13000-2:2011 Plastics-Polytetrafluoroethylene(PTFE) semi-finished products-Part 2:Preparation of test specimens and determination of properties
KS M ISO 172-2002(2017) Plastics－Phenol-formaldehyde mouldings－Determination of free ammonia
KS M ISO 5659-1-2002(2012) Plastics－Somke generation－Part 1：Guidance on optical－density testing
KS M ISO 15791-1:2019 Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 1: General guidance
KS M ISO 8986-2:2013 PLASTIC — POLYBUTYLENE(PB) MOULDING AND EXTRUSION MATERIALS–PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
KS M ISO 8986-2:2008 Plastics-Polybutylene(PB) moulding and extrusion materials-Part 2:Preparation of test specimens and determination of properties

KR-KS, Composition of plastic products

KS M ISO 11469-2018 Plastics — Generic identification and marking of plastics products
KS M ISO 15791-1-2019 Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 1: General guidance

工业和信息化部/国家能源局, Composition of plastic products

JB/T 12787-2016 Plastic mold temperature control machine

国家市场监督管理总局、中国国家标准化管理委员会, Composition of plastic products

GB/T 37866-2019 Green product assessment—Plastic products
GB/T 39714.2-2020 Plastics—Polytetrafluoroethylene(PTFE) semi-finished products—Part 2:Preparation of test specimens and determination of properties
GB/T 38787-2020 Plastics—Methods for the preparation of samples for biodegradation testing of plastic materials
GB/T 40933-2021 Plastics—Film and sheeting—Guidance on the testing of thermoplastic films
GB/T 39328-2020 Additive manufacturing—Specification for material extrusion process of plastic materials

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Composition of plastic products

GJB 5915-2006 Quality control for military plastics product

Military Standard of the People's Republic of China-General Armament Department, Composition of plastic products

GJB 8772-2015 Quality control of military plastic products

American Society for Testing and Materials (ASTM), Composition of plastic products

ASTM D3647-09 Standard Practice for Classifying Reinforced Plastic Pultruded Shapes According to Composition

CEN - European Committee for Standardization, Composition of plastic products

PREN 12814-8-2019 Testing of welded joints of thermoplastics semi-finished products - Part 8: Requirements
PD CEN/TS 13130-20:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 20: Determination of epichlorohydrin in plastics
PREN 17228-2018 Plastics - Bio-based polymers@ plastics@ and plastic products - Terminology@ characteristics and communication
EN 17228:2019 Plastics - Bio-based polymers@ plastics@ and plastics products - Terminology@ characteristics and communication
PREN 12814-2-2019 Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test
PD CEN/TS 13130-22:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 22: Determination of ethylene oxide and propylene oxide in plastics
EN ISO 7792-2:2004 Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 1: Designation system and basis for specifications

US-FCR, Composition of plastic products

FCR 40 CFR PART 414-2012 ORGANIC CHEMICALS, PLASTICS, AND SYNTHETIC FIBERS
FCR 40 CFR PART 414-2015 ORGANIC CHEMICALS, PLASTICS, AND SYNTHETIC FIBERS

GOSTR, Composition of plastic products

GOST 34292-2017 Pipeline valves. Ball valves of thermoplastics materials. General specifications
GOST 34291-2017 Pipeline valves. Check valves of thermoplastics materials. General specifications

CZ-CSN, Composition of plastic products

CSN 64 0008-1968 Construction of Plastic Products (Instruc- ions)

Malaysia Standards, Composition of plastic products

MS 1033-1986

Professional Standard - Environmental Protection, Composition of plastic products

HJBZ 12-1997 Degradable plastic packaging products

Professional Standard - Light Industry, Composition of plastic products

QB/T 6018-2020 Code for design of plastic products plant

SE-SIS, Composition of plastic products

SIS 16 11 42-1963 Plastics. Determination of bulk density of moulding materials. Plunger method
SIS SS 16 11 56-1984 Plastics — Amorphous thermoplastic moulding materials — Preparation of test specimens with a defined level of shrinkage — Part 1: Test specimens in the form of parallelepipedic bars (Injec- tion moulding and compression moulding)

TH-TISI, Composition of plastic products

TIS 653-2011 Plastic containers for milk and milk products
TIS 2491-2011 Plastic films for milk and milk products