ZH
RU
ES

Grain and Granularity

Grain and Granularity, Total:497 items.

In the international standard classification, Grain and Granularity involves: Testing of metals, Particle size analysis. Sieving, Ferrous metals, Vocabularies, Mechanical testing, Cutting tools, Space systems and operations, Sugar. Sugar products. Starch, Soil quality. Pedology, Earthworks. Excavations. Foundation construction. Underground works, Chipless working equipment, Iron and steel products, Non-ferrous metals, Beverages, Products of the chemical industry, Production of metals, Cereals, pulses and derived products, Semiconductor devices, Products of non-ferrous metals, Leather technology, Animal feeding stuffs, Welding, brazing and soldering, Electric road vehicles, Fuels, Analytical chemistry, Air quality, Pesticides and other agrochemicals, Magnetic materials, Fertilizers, Cork and cork products, Coals, Fluid storage devices, Clothes, Continuous handling equipment, Ferroalloys, Farming and forestry, Tea. Coffee. Cocoa, Non-metalliferous minerals, Construction materials, Refractories, Road engineering, Nuclear energy engineering, Physics. Chemistry, Raw materials for rubber and plastics, Metalliferous minerals, Equipment for the chemical industry, Environmental testing, Ceramics, Installations in buildings, Road vehicles in general, Plastics, Inorganic chemicals, Tobacco, tobacco products and related equipment, Geology. Meteorology. Hydrology, Food products in general, Wood, sawlogs and sawn timber.


General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Grain and Granularity

  • GB/T 24177-2009 Standard test methods for characterizing duplex grain sizes
  • GB/T 6394-2002 Metal-methids for estimating the average grain size
  • GB/T 26647.1-2011 Determination of particle size distribution.Single-particle light interaction methods.Part 1:Light interaction considerations
  • GB/T 4335-1984 Cold rolled low-carbon steel sheet--Ferrite grain size--Test methods
  • GB/T 4335-2013 Determination of ferrite grain size for cold rolled low carbon steel sheets
  • GB/T 6288-1986 Determination of particle size for granular molecular sieve
  • GB 6288-1986 Determiantion of particle size for granular molecular sieve
  • GB/T 5117-2012 Covered electrodes for manual metal arc welding of non-alloy and fine grain steels
  • GB/T 14999.7-2010 Test methods for grain sizes,primary dendrite spacing and microshrinkage of superalloy castings
  • GB/T 42348-2023 Particle Size Analysis Particle Tracking Analysis (PTA)
  • GB/T 22231-2008 Particle Size Distribution/Fiber Length and Diameter Distribution
  • GB/T 36165-2018 Determination of average grain size of metal.Electron backscatter diffraction (EBSD)method
  • GB/T 15445-1995 Graphical representation of results of particle size analysis
  • GB/T 41949-2022 Particle─Laser particle size analyser─Technical requirements
  • GB 15445-1995 Graphical representation of particle size analysis results
  • GB/T 4197-1984 Method for measuring the average grain size of sintered bar and rod of tungsten molybdenum and alloys
  • GB/T 16742-2008 Function representation of particle size distribution.Power-function
  • GB/T 16742.1-1997 Function representation of particle size distribution. Power-function
  • GB/T 9258.2-2000 Coated abrasives-Grain size analysis-Part 2: Determination of grain size distribution of macrogrits P12 to P220
  • GB/T 9258.2-2008 Coated abrasives.Grain size analysis.Part 2:Determination of grain size distribution of macrogrits P12 to P220
  • GB/T 189-1997 Classification standard for size fractions of coal
  • GB/T 9258.1-2000 Coated abrasives-Grain size analysis-Part 1: Grain size distribution test
  • GB/T 2521-1996 Cold-rolled grain-oriented and non-oriented magnetic steel strip(sheet)
  • GB/T 7702.2-1997 Standard test method for granular activated carbon from coal--Determination of particle size
  • GB/T 43211-2023 Test Method for Particle Size Determination of Softwood Pellets by Mechanical Sieving
  • GB/T 15445.2-2006 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distibutions
  • GB/T 29025-2012 Determination of particle size distributions.Electrical sensing zone method
  • GB/T 14853.6-2002 Rubber compounding ingredients--Carbon black,pelletized--Determination of individual pellet crushing trength
  • GB/T 6167.2-1985 Methods for testing the performance of dust particle counter--Particle concentration
  • GB/T 10515-1989 The determination of particle size for nitrophosphate
  • GB/T 2477-1983 Grain size and grain size distribution
  • GB/T 6406-2016 Superabrasive.Checking the grain size
  • GB/T 29024.3-2012 Determination of particle size distribution.Single particle light interaction methods.Part 3:Light extinction liquid-borne particle counter
  • GB/T 29024.2-2016 Determination of particle size distribution.Single particle light interaction methods.Part 2:Light scattering liquid-borne particle counter
  • GB/T 5519-2008 Cereals and pulses.Determination of the mass of 1000 grains

American Society for Testing and Materials (ASTM), Grain and Granularity

  • ASTM E1181-02(2015) Standard Test Methods for Characterizing Duplex Grain Sizes
  • ASTM E930-18 Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)
  • ASTM E1181-02(2008) Standard Test Methods for Characterizing Duplex Grain Sizes
  • ASTM E1181-02(2008)e1 Standard Test Methods for Characterizing Duplex Grain Sizes
  • ASTM E930-99 Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)
  • ASTM E930-99(2007) Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)
  • ASTM E726-01(2006) Standard Test Method for Particle Size Distribution of Granular Carriers and Granular Pesticides
  • ASTM E726-96 Standard Test Method for Particle Size Distribution of Granular Carriers and Granular Pesticides
  • ASTM E726-01 Standard Test Method for Particle Size Distribution of Granular Carriers and Granular Pesticides
  • ASTM E930-99(2015) Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)
  • ASTM E727/E727M-08(2013) Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
  • ASTM E726-01(2011)e1 Standard Test Method for Particle Size Distribution of Granular Carriers and Granular Pesticides
  • ASTM F51-00(2007) Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
  • ASTM F51-00 Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
  • ASTM E726-01(2021) Standard Test Method for Particle Size Distribution of Granular Carriers and Granular Pesticides
  • ASTM E725-96(2006) Standard Test Method for Sampling Granular Carriers and Granular Pesticides
  • ASTM E728-91(2004)e1 Standard Test Method for Resistance to Attrition of Granular Carriers and Granular Pesticides
  • ASTM F51/F51M-00(2014)e1 Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
  • ASTM E725-96(2012) Standard Test Method for Sampling Granular Carriers and Granular Pesticides
  • ASTM D2862-97(2009)e1 Standard Test Method for Particle Size Distribution of Granular Activated Carbon
  • ASTM D2862-97(2009) Standard Test Method for Particle Size Distribution of Granular Activated Carbon
  • ASTM D2862-16(2022) Standard Test Method for Particle Size Distribution of Granular Activated Carbon
  • ASTM D2862-10 Standard Test Method for Particle Size Distribution of Granular Activated Carbon
  • ASTM D2862-16 Standard Test Method for Particle Size Distribution of Granular Activated Carbon
  • ASTM E728-91(2009) Standard Test Method for Resistance to Attrition of Granular Carriers and Granular Pesticides
  • ASTM F51/F51M-00(2007)e1 Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
  • ASTM E1181-87(1998)e1 Standard Test Methods for Characterizing Duplex Grain Sizes
  • ASTM E1181-02 Standard Test Methods for Characterizing Duplex Grain Sizes
  • ASTM E1181-02(2023) Standard Test Methods for Characterizing Duplex Grain Sizes
  • ASTM D1366-86(2007) Standard Practice for Reporting Particle Size Characteristics of Pigments
  • ASTM UOP422-66 Particle Size Distribution by Micromesh Sieves
  • ASTM C1212-98 Standard Practice for Fabricating Ceramic Reference Specimens Containing Seeded Voids
  • ASTM C1212-98(2004) Standard Practice for Fabricating Ceramic Reference Specimens Containing Seeded Voids
  • ASTM C1212-98(2010) Standard Practice for Fabricating Ceramic Reference Specimens Containing Seeded Voids

Taiwan Provincial Standard of the People's Republic of China, Grain and Granularity

HU-MSZT, Grain and Granularity

SAE - SAE International, Grain and Granularity

Korean Agency for Technology and Standards (KATS), Grain and Granularity

Liaoning Provincial Standard of the People's Republic of China, Grain and Granularity

Professional Standard - Ferrous Metallurgy, Grain and Granularity

  • YB/T 4290-2012 Determination method of the largest grain size grade (ALA grain size) on the metallographic inspection surface
  • YB/T 5148-1993 Method for determination of average grain size of metals
  • YB/T 5224-1993 Grain Oriented Silicon Steel Strip
  • YB/T 4183-2009 Laser Diffraction Method for Determination of Particle Size Distribution of Smelting Slag Powder

Japanese Industrial Standards Committee (JISC), Grain and Granularity

  • JIS R 6011:1991 Testing method for grain size of coated abrasive macrogrits (P12-P220)
  • JIS G 0551:1998 Methods of austenite grain size determination for steel
  • JIS G 0552:1998 Methods of ferrite grain determination test for steel
  • JIS H 7803:2005 General rules for the determination of particle size and crystallite size in metal catalysts
  • JIS G 0551:1977 Methods of austenite grain size test for steel
  • JIS G 0552:1977 Methods of ferrite grain size test for steel
  • JIS B 4130:1982 Grain sizes of diamond or cubic boron nitride
  • JIS H 0501:1986 Methods for estimating average grain size of wrought copper and copper alloys
  • JIS R 6001:1987 Abrasive grain sizes
  • JIS C 2553:2000 Grain-oriented magnetic steel sheet and strip
  • JIS Z 8829:2021 Particle size analysis -- Particle tracking analysis (PTA) method
  • JIS G 1641:1998 Methods of sampling for size analysis of ferroalloys and size determination
  • JIS Z 8819-2:2001 Representation of results of particle size analysis -- Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
  • JIS B 4130:1998 Diamond/CBN products -- Grain sizes of diamond or cubic boron nitride
  • JIS Z 8900-1:2008 Standards particles -- Part 1: Reference particles for calibrating particle size measurements apparatus
  • JIS R 6012:2000 Testing method for grain size of coated abrasive microgrits (P240-P2500)
  • JIS R 6001:1998 Bonded abrasive grain sizes
  • JIS R 6010:2000 Coated abrasive grain sizes
  • JIS Z 8822:2001 Determination of particle size distribution by the mass of sediment-particles in liquid
  • JIS K 6219-4:2006 Carbon black for rubber industry -- Characteristics of pelletized carbon black -- Part 4: Determination of pellet size distribution
  • JIS H 7805:2005 Method for crystallite size determination in metal catalysts by X-ray diffractometry
  • JIS G 1641:1985 Methods of sampling for size analysis of ferroalloys and size determination
  • JIS R 6012:1991 Testing method for grain size of coated abrasive microgrits (P240-P1200)
  • JIS R 6002:1987 Testing methods for abrasive grain size

BE-NBN, Grain and Granularity

Association Francaise de Normalisation, Grain and Granularity

  • NF E75-230*NF ISO 8486-1:1996 Bonded abrasives. Determination and designation of grain size distribution. Part 1 : macrogrits F4 to F220.
  • NF E75-231:1993 Abrasive macrograins. Determination of bulk density.
  • NF A04-102:2003 Steels - Micrographic determination of the apparent grain size.
  • NF A04-102:2013 Steels - Micrographic determination of the apparent grain size
  • NF V03-721:1994 Semolina {durum} wheat. Granulation of semolina.
  • NF ISO 6344-3:2022 Abrasifs appliqués - Détermination et désignation de la distribution granulométrique - Partie 3 : micrograins P240 à P5000
  • NF ISO 8486-2:2007 Abrasifs agglomérés - Détermination et désignation de la distribution granulométrique - Partie 2 : micrograins F230 à F2000
  • NF A04-102:1980 Iron and steel. Macrographic determination of the ferritic or austenitic grain size of steels.
  • NF B57-011:1973 Granulés crus de liège - Analyse granulométrique.
  • NF X11-666:1984 PARTICLE SIZE ANALYSIS OF POWDERS. DIFFRACTION METHOD.
  • NF E75-234:1996 Bonded abrasives. Determination and designation of grain size distribution. Part 2 : microgrits F230 to F1200.
  • NF P94-040:1993 Soils : investigation and testing. Practical method for identifying the 0/50 mm fraction of a granular material. Determination of particle size and blue value.
  • NF E75-101:2001 Coated abrasives - Grain size analysis - Part 2 : determination of grain size distribution of macrogrits P12 to P220.
  • NF X11-632:1990 SIZE DETERMINATION. EXPRESSION FO RESULTS OF SIZE DETERMINATION.
  • NF X11-635:1985 Size analysis-Representation of particle size distributions - Reference models
  • NF E75-231-2*NF ISO 9136-2:1999 Abrasive grains - Determination of bulk density - Part 2 : microgrits.
  • NF E75-231-1*NF ISO 9136-1:2005 Abrasive grains - Determination of bulk density - Part 1 : macrogrits.
  • NF M03-021:1967 Analyse granulométrique du coke
  • NF ISO 9136-2:1999 Grains abrasifs - Détermination de la masse volumique apparente - Partie 2 : micrograins
  • NF B40-309:1986 Refractories - Determination of the density,the open porosity and the total porosity of materials in grain form
  • NF A36-620-4/A1:2002 Steel forgings for pressure purposes - Part 4 : weldable fine grain steels with high proof strength.
  • NF X11-681:1982 Particle size analysis. Particle size analysis by gravity sedimentation. Pipette method.
  • X11-634:1988 Particle size analysis. Characterization of the size and form of the elements of a granular population.
  • NF EN 17289-3:2020 Caractérisation des matériaux en vrac - Détermination de la fraction fine pondérée par taille et de la teneur en silice cristalline - Partie 3 : méthode par sédimentation
  • NF A04-102*NF EN ISO 643:2020 Steels - Micrographic determination of the apparent grain size
  • NF U43-217:1981 Agropharmaceutical products. Method of particle size determination for "micronized" sulphurs.
  • NF EN 17289-2:2020 Caractérisation des matériaux en vrac - Détermination de la fraction fine pondérée par taille et de la teneur en silice cristalline - Partie 2 : méthode par calcul
  • NF A04-503:1988 Semi-products made from aluminium, copper, nickel and their alloys. Determination of grain size. Aluminium and aluminium alloys.
  • NF A04-505:1988 Semi-products made from aluminium, copper, nickel and their alloys. Determination of grain size. Nickel and nickel alloys.
  • NF X11-630:2001 Particle size analysis - Vocabulary.
  • NF ISO 4701:1986 Minerais de fer - Détermination de la granulométrie par tamisage.
  • NF B41-204-1*NF EN ISO 13383-1:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Microstructural characterization - Part 1 : Determination of grain size and size distribution
  • NF E75-100-3:2013 Coated abrasives - Grain size analysis - Part 3: determination of grain size distribution of microgrits P240 to P2500
  • NF X11-660:1983 Granulométrie - Analyse granulométrique par microscopie optique - Généralités sur le microscope.
  • NF X11-661:1990 Particle size analysis. Determination of particle size of powders. Optical microscope method.
  • NF T20-223:1973 Aluminium oxide primarily used for the production of aluminium. Particle size analysis. Sieving method.
  • NF EN ISO 17830:2016 Biocombustibles solides - Détermination de la distribution granulométrique des granulés désintégrés
  • FD CEN/TR 17856:2022 Mesures des propriétés de vernis d'aciers électriques à grains non orientés
  • NF X34-112*NF EN ISO 18847:2016 Solid biofuels - Determination of particle density of pellets and briquettes
  • NF X11-634:1988 Granulométrie - Caractérisation de la taille et de la forme des éléments d'une population granulaire
  • NF ISO 9136-1:2005 Grains abrasifs - Détermination de la masse volumique apparente - Partie 1 : macrograins
  • NF V05-223:1986 Instant coffee. Size analysis.
  • NF A36-620-4*NF EN 10222-4+A1:2021 Steel forgings for pressure purposes - Part 4 : weldable fine grain steels with high proof strength
  • NF A36-620-4/IN1*NF EN 10222-4/IN1:2021 Steel forgings for pressure purposes - Part 4 : weldable fine grain steels with high proof strength
  • NF E75-101*NF ISO 6344-2:2022 Coated abrasives - Determination and designation of grain size distribution - Part 2 : macrogrit sizes P12 to P220
  • NF E75-100-3*NF ISO 6344-3:2022 Coated abrasives - Determination and designation of grain size distribution - Part 3 : microgrit sizes P240 to P5000

British Standards Institution (BSI), Grain and Granularity

  • BS PD ISO/TS 23151:2021 Nanotechnologies. Particle size distribution for cellulose nanocrystals. Particle size distribution for cellulose nanocrystals
  • BS EN ISO 643:2012 Steels. Micrographic determination of the apparent grain size
  • BS EN ISO 3378:2002 Leather. Physical and mechanical tests. Determination of resistance to grain cracking and grain crack index
  • BS ISO 6344-1:1998 Coated abrasives. Grain size analysis. Grain size distribution test
  • BS ISO 9136-2:2000 Abrasive grains - Determination of bulk density - Microgrits
  • BS EN 17289-3:2020 Characterization of bulk materials. Determination of a size-weighted fine fraction and crystalline silica content. Sedimentation method
  • BS ISO 9276-2:2001 Representation of results of particle size analysis - Calculation of average particle sizes/diameters and moments from particle size distributions
  • BS ISO 9276-2:2014 Representation of results of particle size analysis. Calculation of average particle sizes/diameters and moments from particle size distributions
  • BS EN 17289-2:2020 Characterization of bulk materials. Determination of a size-weighted fine fraction and crystalline silica content. Calculation method
  • BS ISO 9136-1:2005 Abrasive grains - Determination of bulk density - Macrogrits
  • BS EN ISO 643:2020 Steels. Micrographic determination of the apparent grain size
  • BS ISO 6344-3:2013 Coated abrasives. Grain size analysis. Determination of grain size distribution of microgrits P240 to P2500
  • BS ISO 9136-1:2004 Abrasive grains. Determination of bulk density - Macrogrits
  • BS ISO 21501-3:2007 Determination of particle size distribution. Single particle light interaction methods. Light extinction liquid-borne particle counter
  • BS ISO 21501-2:2007 Determination of particle size distribution. Single particle light interaction methods. Light scattering liquid-borne particle counter
  • BS ISO 8840:2021 Refractory materials. Determination of bulk density of granular materials (grain density)
  • BS ISO 8511:2011 Rubber compounding ingredients. Carbon black. Determination of pellet size distribution
  • BS ISO 6344-3:2021 Coated abrasives. Determination and designation of grain size distribution - Microgrit sizes P240 to P5000
  • BS ISO 6344-2:2021 Coated abrasives. Determination and designation of grain size distribution - Macrogrit sizes P12 to P220
  • BS ISO 6344-2:1998 Coated abrasives - Grain size analysis - Determination of grain size distribution of macrogrits P12 to P220
  • BS ISO 2030:2018 Granulated cork. Size analysis by mechanical sieving
  • BS ISO 21501-3:2019 Determination of particle size distribution. Single particle light interaction methods - Light extinction liquid-borne particle counter
  • BS EN 10222-4:2017 Steel forgings for pressure purposes. Weldable fine grain steels with high proof strength
  • BS EN 10222-4:1999 Steel forgings for pressure purposes. Weldable fine-grain steels with high proof strength
  • BS EN 10222-4:2017+A1:2021 Steel forgings for pressure purposes. Weldable fine grain steels with high proof strength
  • 21/30395144 DC BS ISO 8840. Refractory materials. Determination of bulk density of granular materials (grain density)
  • BS ISO 21501-4:2018 Determination of particle size distribution. Single particle light interaction methods. Light scattering airborne particle counter for clean spaces
  • BS ISO 21501-4:2007 Determination of particle size distribution. Single particle light interaction methods. Light scattering airborne particle counter for clean spaces
  • BS ISO 21501-2:2019 Determination of particle size distribution. Single particle light interaction methods - Light scattering liquid-borne particle counter
  • BS ISO 728:2021 Coke. Size analysis by sieving
  • BS EN 17289-1:2020 Characterization of bulk materials. Determination of a size-weighted fine fraction and crystalline silica content. General information and choice of test methods
  • BS EN 15415-3:2012 Solid recovered fuels. Determination of particle size distribution. Method by image analysis for large dimension particles
  • PD ISO/TS 23151:2021 Nanotechnologies. Particle size distribution for cellulose nanocrystals
  • BS ISO 27891:2015 Aerosol particle number concentration. Calibration of condensation particle counters
  • 23/30456662 DC BS EN ISO 17830. Solid biofuels. Particle size distribution of disintegrated pellets
  • 19/30380076 DC BS EN 17289-2. Characterization of bulk materials. Determination of a sizeweighted fine fraction and crystalline silica content. Part 2. Calculation method
  • 19/30380079 DC BS EN 17289-3. Characterization of bulk materials. Determination of a sizeweighted fine fraction and crystalline silica content. Part 3. Sedimentation method

(U.S.) Ford Automotive Standards, Grain and Granularity

United States Navy, Grain and Granularity

RO-ASRO, Grain and Granularity

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Grain and Granularity

  • GB/T 6394-2017 Determination of estimating the average grain size of metal
  • GB/T 5519-2018 Cereals and pulses—Determination of the mass of 1000 grains

Standard Association of Australia （SAA）, Grain and Granularity

  • AS 1733:1976 Methods for the determination of grain size in metals
  • AS 1548:2008 Fine grained, weldable steel plates for pressure equipment
  • AS 4514:2006 Abrasive products - Checking the grit size of superabrasives
  • AS 2891.11:2005 Methods of sampling and testing asphalt - Degree of particle coating

RU-GOST R, Grain and Granularity

  • GOST 12536-2014 Soils. Methods of laboratory granulometric (grain-size) and microaggregate distribution
  • GOST R 55799-2013 Grain distillates. Specification
  • GOST R ISO 643-2011 Steels. Micrographic determination of the apparent grain size
  • GOST R ISO 643-2015 Steels. Micrographic determination of the apparent grain size
  • GOST R 53934-2010 Grain-oriented electrical steel strip. Specifications
  • GOST 2765-1973 Curried dog skins. Specifications
  • GOST R 52381-2005 Abrasive materials. Grain and grain size distribution of grinding powders. Test of grain size distribution
  • GOST 33212-2014 Non-grain oriented electrical steel strip. Specifications
  • GOST 13586.2-1981 Grain. Methods for determination of foreign grain and specially counted foreigen matter, small grains and grain size
  • GOST 21073.2-1975 Non-ferrous metals. Determination of grain size bu grain calculation method
  • GOST R 54480-2011 Non-grain oriented electrical steel strip. Specifications
  • GOST R 53922-2010 Diamond and from cubic boron nitride (elbon) powders. Grain and grain size distribution of grinding powders. Test of grain size distribution
  • GOST ISO 4150-2015 Green coffee. Particle-size analysis
  • GOST ISO 8840-2014 Refractory materials. Determination of bulk density of granular materials (grain density)
  • GOST 21073.0-1975 Non-ferrous metals. Determination of grain size. General requirements
  • GOST 34236-2017 Light and middle distillate fuels. Determination of sizing and counting particles by automatic particle counter
  • GOST 26312.4-1984 Groats. Methods for determination of grain size, admixture content and sound kernels
  • GOST 27560-1987 Flour and bran. Method for determination of particle size
  • GOST R ISO 14250-2013 Steel. Metallographic characterization of duplex grain size and distribution
  • GOST R 55550-2013 Solid biofuels. Determination of particle size distribution of disintegrated pellets
  • GOST 19724-1974 Fluorite. Method of grain-size analysis
  • GOST 30423-1996 Cigarettes. Determination of loss of tobacco from the ends

International Federation of Trucks and Engines, Grain and Granularity

International Organization for Standardization (ISO), Grain and Granularity

  • ISO/CD 643 Steels — Micrographic determination of the apparent grain size
  • ISO 2624:1973 Copper and copper alloys — Estimation of average grain size
  • ISO 2624:1990 Copper and copper alloys; estimation of average grain size
  • ISO 9138:1993 Abrasive grains; sampling and splitting
  • ISO 9138:2015 Abrasive grains - Sampling and splitting
  • ISO/TS 23151:2021 Nanotechnologies — Particle size distribution for cellulose nanocrystals
  • ISO 2030:1990 Granulated cork; size analysis by mechanical sieving
  • ISO 2030:2018 Granulated cork - Size analysis by mechanical sieving
  • ISO/DIS 643:2023 Steels — Micrographic determination of the apparent grain size
  • ISO 8486:1986 Bonded abrasives; Grain size analysis; Designation and determination of grain size distribution of macrogrits F4 to F220
  • ISO 2325:1979 Coke — Size analysis (Nominal top size 20 mm or less)
  • ISO 2325:1972 Title missing - Legacy paper document
  • ISO 9136-1:2004 Abrasive grains - Determination of bulk density - Part 1: Macrogrits
  • ISO 2325:1986 Coke; Size analysis (Nominal top size 20 mm or less)
  • ISO 1953:1972 Hard coals; Size analysis
  • ISO 8876:1989 Fluorspar; determination of particle size distribution by sieving
  • ISO 728:1981 Coke (nominal top size greater than 20 mm); Size analysis
  • ISO 728:1995 Coke (nominal top size greater than 20 mm) - Size analysis by sieving
  • ISO 9276-2:2001 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
  • ISO 9276-2:2014 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
  • ISO 6230:1989 Manganese ores; determination of size distribution by sieving
  • ISO 13383-1:2012 Fine ceramics (advanced ceramics, advanced technical ceramics) - Microstructural characterization - Part 1: Determination of grain size and size distribution
  • ISO 6344-3:2013 Coated abrasives.Grain size analysis.Part 3: Determination of grain size distribution of microgrits P240 to P2500
  • ISO 8840:1987 Refractory materials; Determination of bulk density of granular materials (grain density)
  • ISO 8840:2021 Refractory materials - Determination of bulk density of granular materials (grain density)
  • ISO 27891:2015 Aerosol particle number concentration - Calibration of condensation particle counters
  • ISO 7532:1985 Instant coffee - Size analysis
  • ISO/DIS 1953:2022 Hard coal — Size analysis by sieving
  • ISO 6344-3:2021 Coated abrasives — Determination and designation of grain size distribution — Part 3: Microgrit sizes P240 to P5000
  • ISO/TR 7708:1983 Air quality; Particle size fraction definitions for health-related sampling
  • ISO 21501-3:2019 Determination of particle size distribution — Single particle light interaction methods — Part 3: Light extinction liquid-borne particle counter

Group Standards of the People's Republic of China, Grain and Granularity

  • T/SXJP 018-2023 Fine-grain high-strength hot-rolled ribbed steel bars
  • T/CFA 0106024-2021 Determination of the average grain size of cast aluminium silicon alloys
  • T/CCEMA 0001-2020 Particle Size and Shape of Granular Potash Fertilizer
  • T/CSAE 58-2017 Test method for average grain size of non-quenched and tempered steel and its products
  • T/SAS 0004-2018 Bismuth germinate scintillation crystals for space particle dectection
  • T/GDMIA 001-2019 Superfine particle size sand mill
  • T/CNIA 0042-2020 Small particle size ferromolybdenum briquetting ball
  • T/CCAS 006-2018 Validation and comprehensive evaluation specification of laser particle size analyzer (wet method)

Professional Standard - Machinery, Grain and Granularity

  • JB/T 9395.5-1999 Measuring method for scatter graininess of optical crystal
  • JB/T 9495.5-1999 Measuring method for scatter graininess of optical crystal
  • JB/T 7946.4-1999 Metallograph of cast aluminium alloys.Cast aluminium-copper alloys－Grain size
  • JB/T 9014.3-1999 Continuous handling equipment.Loose bulk material.Determination of composition of size and pellet
  • JB/T 7946.4-2017 Metallography of cast aluminum alloys - Part 4: Grain size of cast aluminum-copper alloys

Professional Standard - Aviation, Grain and Granularity

  • HB 20057-2011 Test methods for estimating grain size of superalloy investment castings

Professional Standard - Commodity Inspection, Grain and Granularity

  • SN/T 0480.1-1995 Method of analysis baryte for export.Determination of size
  • SN/T 3112-2012 Method of distinguishing grain orientation and non-orientation of cold-rolled silicon steel sheets
  • SN/T 3514-2013 Identification method of texture analysis for grain oriented and non-oriented electrical steels.X-ray diffraction(XRD)

Professional Standard - Non-ferrous Metal, Grain and Granularity

  • YS/T 347-2004 Copper and copper alloys-Estimation of average grain size
  • YS/T 347-1994 Method for determination of average grain size of copper and copper alloys

工业和信息化部, Grain and Granularity

  • YS/T 347-2020 Method for determination of average grain size of copper and copper alloys

GM North America, Grain and Granularity

European Committee for Standardization (CEN), Grain and Granularity

  • EN ISO 2624:1995 Copper and Copper Alloys - Estimation of Average Grain Size
  • EN ISO 17830:2016 Solid biofuels - Particle size distribution of disintegrated pellets
  • prEN ISO 18847 rev Solid biofuels — Determination of particle density of pellets and briquettes
  • EN ISO 643:2020 Steels - Micrographic determination of the apparent grain size (ISO 643:2019, Corrected version 2020-03)
  • EN ISO 643:2012 Steels - Micrographic determination of the apparent grain size
  • prEN ISO 17830 Solid biofuels - Particle size distribution of disintegrated pellets (ISO/DIS 17830:2023)

CZ-CSN, Grain and Granularity

Military Standard of the People's Republic of China-General Armament Department, Grain and Granularity

  • GJB 9890.2-2020 Detection and evaluation of structure of GH4169 alloy for aviation use Part 2: Grain size evaluation method

国家市场监督管理总局、中国国家标准化管理委员会, Grain and Granularity

  • GB/T 40944-2021 Determination of feed particle size—Geometric mean diameter method
  • GB/T 6288-2021 Determination of particle size for granular molecular sieve
  • GB/T 38879-2020 Particle—Size analysis—Color image analysis methods
  • GB/T 10045-2018 Tubular cored electrodes for non-alloy and fine grain steels

Association of German Mechanical Engineers, Grain and Granularity

IN-BIS, Grain and Granularity

Professional Standard - Agriculture, Grain and Granularity

  • 2354药典 二部-2010 APPENDIX IX E DETERMINATION OF PARTICLE SIZE AND PARTICLE SIZE DISTRIBUTION
  • 218药典 三部-2020 Physical examination method 0982 Particle size and particle size distribution method
  • 124药典 四部-2020 0900 Characteristic inspection method 0982 Particle size and particle size distribution measurement method
  • 143药典 四部-2015 0900 Characteristic inspection method 0982 Particle size and particle size distribution measurement method
  • GB/T 189-1963 Coal Size Classification
  • 199药典 三部-2015 Physical inspection method 0982 General rules for particle size and particle size distribution determination method 47
  • 845兽药典 一部-2015 Appendix Contents 0900 Characteristic Inspection Method 0982 Particle Size and Particle Size Distribution Determination Method
  • NY/T 1575-2007 Rules for quality testing and grading of forage pellets
  • GB 10515-1989 Nitrophosphate particle size determination

German Institute for Standardization, Grain and Granularity

  • DIN ISO 9136-2:2000 Abrasive grains - Determination of bulk density - Part 2: Microgrits (ISO 9136-2:1999)
  • DIN ISO 6344-3:2000 Coated abrasives - Grain size analysis - Part 3: Determination of grain size distribution of microgrits P 240 to P 2500 (ISO 6344-3:1998)
  • DIN 66120:1983 Particle size analysis; size analysis by air classification with centrifugal counterflow classifier
  • DIN 66120:2016 Particle size analysis - Size analysis by air classification with centrifugal counterflow classifier
  • DIN ISO 6344-1:2000 Coated abrasives - Grain size analysis - Part 1: Grain size distribution test (ISO 6344-1:1998)
  • DIN EN ISO 643:2020-06 Steels - Micrographic determination of the apparent grain size (ISO 643:2019, Corrected version 2020-03); German version EN ISO 643:2020
  • DIN ISO 9276-2:2018-09 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions (ISO 9276-2:2014)
  • DIN ISO 9136-1:2006 Abrasive grains - Determination of bulk density - Part 1: Macrogrits (ISO 9136-1:2004);English version of DIN ISO 9136-1:2006-03
  • DIN 66118:1984 Particle size analysis; size analysis by air classification; fundamentals
  • DIN ISO 6344-3:2017 Coated abrasives - Grain size analysis - Part 3: Determination of grain size distribution of microgrits P240 to P2500 (ISO 6344-3:2013)
  • DIN EN ISO 17830:2023-02 Solid biofuels - Particle size distribution of disintegrated pellets (ISO/DIS 17830:2023); German and English version prEN ISO 17830:2023 / Note: Date of issue 2023-01-06*Intended as replacement for DIN EN ISO 17830 (2016-11).
  • DIN EN 17289-3:2021-02 Characterization of bulk materials - Determination of a size-weighted fine fraction and crystalline silica content - Part 3: Sedimentation method; German version EN 17289-3:2020
  • DIN EN 17289-2:2021-02 Characterization of bulk materials - Determination of a size-weighted fine fraction and crystalline silica content - Part 2: Calculation method; German version EN 17289-2:2020
  • DIN ISO 9276-2:2018 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions (ISO 9276-2:2014)
  • DIN ISO 9276-2:2006 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions (ISO 9276-2:2001);English version of DIN ISO 9276-2:2006-02
  • DIN EN 481:1993 Workplaces atmospheres; size fraction definitions for measurement of airborne particles; German version EN 481:1993
  • DIN EN ISO 17830:2016-11 Solid biofuels - Particle size distribution of disintegrated pellets (ISO 17830:2016); German version EN ISO 17830:2016 / Note: To be replaced by DIN EN ISO 17830 (2023-02).
  • DIN EN ISO 18847:2016-12 Solid biofuels - Determination of particle density of pellets and briquettes (ISO 18847:2016); German version EN ISO 18847:2016
  • DIN 66165-2:1987 Particle size analysis; sieve analysis; procedure
  • DIN EN ISO 643:2023-08 Steels - Micrographic determination of the apparent grain size (ISO/DIS 643:2023); German and English version prEN ISO 643:2023 / Note: Date of issue 2023-07-07*Intended as replacement for DIN EN ISO 643 (2020-06).
  • DIN EN 10222-4:2001 Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength (includes Amendment A1:2001); German version EN 10222-4:1998 + A1:2001
  • DIN 66119:2016 Particle size analysis - Size analysis by air classification with gravitation-counterflow elutriator
  • DIN 66119:1983 Particle size analysis; size analysis by air classification with gravitation-counterflow elutriator

ES-AENOR, Grain and Granularity

GM Holden Ltd, Grain and Granularity

Professional Standard - Chemical Industry, Grain and Granularity

  • HG/T 2223-1991 Particle Size Determination of Granular Double Superphosphate
  • HG 2223-1991 Particle Size Determination of Granular Double Superphosphate
  • HG/T 2224-1991 Determination of granular average compressive strength of granular double superphosphate

PH-BPS, Grain and Granularity

  • PNS ISO 6344-3:2021 Coated abrasives - Grain size analysis - Part 3: Determination of grain size distribution of microgrits P240 to P2500

VN-TCVN, Grain and Granularity

Society of Automotive Engineers (SAE), Grain and Granularity

Indonesia Standards, Grain and Granularity

未注明发布机构, Grain and Granularity

YU-JUS, Grain and Granularity

  • JUS K.F0.001-1989 Grain si7.es of fused alumlnium oxlde and sIlicon carbide for bonded abrasive products. ?esignaticm and graJn slze distribution
  • JUS K.F0.005-1989 Gralns of fused alumiuium oxide and silicon carbide for boodod abrasivc products. Particle si?e measurement of microgrfts by Eppendorf - photosedimentometer
  • JUS K.F0.002-1989 GraJns of fused aluminium oxide and silicon carbide for boodod abrasivc products. Grain si?e analysis of macrogrits F 4 to F 220
  • JUS K.F0.033-1989 GraJns of fused aluminium oxlde and sIlIcon carbide for coated abrasive producls. Grain slze analysis of microgrits P 240 to P 1200
  • JUS K.F0.032-1989 Grains of fused aluminium oxJde and slllcon carbide for coated abrasive products. Graln sir.e analysls of macrogrlts P 12 to P 220
  • JUS K.F0.004-1989 Gralns of fused alumlnium oxide and slllccm carbide for bonded abrasive. products. Grala si?e analysis of microgrits P 230 to F 1200
  • JUS H.B8.817-1992 Straight ammonium nitrate fertilizers of high nitrogen content - Determination of the particle size (granulometry)

Danish Standards Foundation, Grain and Granularity

  • DS/EN 17289-3:2021 Characterization of bulk materials – Determination of a size-weighted fine fraction and crystalline silica content – Part 3: Sedimentation method
  • DS/EN 10222-4:2021 Steel forgings for pressure purposes – Part 4: Weldable fine grain steels with high proof strength
  • DS/EN 17289-2:2021 Characterization of bulk materials – Determination of a size-weighted fine fraction and crystalline silica content – Part 2: Calculation method
  • DS/EN ISO 2624:1995 Copper and copper alloys - Estimation of average grain size
  • DS/EN ISO 643:2013 Steels - Micrographic determination of the apparent grain size
  • DS/EN 16126:2012 Solid biofuels - Determination of particle size distribution of disintegrated pellets
  • DS/ISO 1953:1994 Hard coal - Size analysis by sieving

U.S. Military Regulations and Norms, Grain and Granularity

ZA-SANS, Grain and Granularity

KR-KS, Grain and Granularity

ES-UNE, Grain and Granularity

  • UNE-EN ISO 17830:2016 Solid biofuels - Particle size distribution of disintegrated pellets (ISO 17830:2016)
  • ISO/DIS 17830:2023 Solid biofuels — Particle size distribution of disintegrated pellets
  • UNE 37230:1987 ERRATUM LEAD AND LEAD ALLOYS- ESTIMATION OF THE AVERAGE GRAIN SIZE.
  • UNE-EN 17289-2:2021 Characterization of bulk materials - Determination of a size-weighted fine fraction and crystalline silica content - Part 2: Calculation method
  • UNE-EN 17289-3:2021 Characterization of bulk materials - Determination of a size-weighted fine fraction and crystalline silica content - Part 3: Sedimentation method
  • ISO/DIS 18847:2023 Solid biofuels — Determination of particle density of pellets and briquettes

PL-PKN, Grain and Granularity

  • PN-EN 17289-2-2021-05 E Characterization of bulk materials -- Determination of a size-weighted fine fraction and crystalline silica content -- Part 2: Calculation method
  • PN C04828-1991 Agents for laundering and washing. Powders and granules. Determination of granulity
  • PN C87007-16-1993 Calcium fertilizes Determination of grainsize
  • PN C87060-03-1987 Fertilizers Determination of physical properties of powder and crystalline fertilizers Determination of size composition

Professional Standard - Building Materials, Grain and Granularity

  • JC/T 2018-2010 Thallium doped cesium iodide crystal for high-energy particles detection

AENOR, Grain and Granularity

Professional Standard - Petroleum, Grain and Granularity

National Metrological Verification Regulations of the People's Republic of China, Grain and Granularity

Lithuanian Standards Office , Grain and Granularity

  • LST EN 16126-2012 Solid biofuels - Determination of particle size distribution of disintegrated pellets

The American Road & Transportation Builders Association, Grain and Granularity

  • AASHTO T 311-2000(R2010) Standard Method of Test for Grain-Size Analysis of Granular Soil Materials
  • AASHTO T311-2000 Standard Method of Test for Grain-Size Analysis of Granular Soil Materials Twentieth Edition
  • AASHTO T 311-2000 Standard Method of Test for Grain-Size Analysis of Granular Soil Materials

The Aluminum Association, Grain and Granularity

  • AA TP-1-2012 Standard Test Procedure for Aluminum Alloy Grain Refiners

AT-ON, Grain and Granularity

  • ONORM EN 481-1993 Workplace atmospheres - Size fraction definitions for measurement of airborne particles

National Metrological Technical Specifications of the People's Republic of China, Grain and Granularity

  • JJF 2060-2023 Production of Sub-micron and Nanometer Particle Size Reference Materials

化学工业部, Grain and Granularity

  • HG 2224-1991 Determination of the granular average compressive temperature of granular heavy superphosphate

IT-UNI, Grain and Granularity

中国有色金属工业总公司, Grain and Granularity

  • YS/T 27-1992 Methods for measuring and counting particulate contamination on wafer surfaces

Professional Standard - Meteorology, Grain and Granularity

  • QX/T 72-2007 Determination of number size distribution of submicron particle by using Electrical Mobility Method

  grain size, Grain and Grain Size, grain size, Grain Grade vs. Grain Size, Grain Size and Grain Size, Grain Size, Grain Size vs. Grain Size, Grain Size and Grain Size Class, grain size grain size, Grain Size and Grain Size, Grain Size and Size, Grain and half-grain, Grain Size vs. Grain Size, grain size grain size, Grain size, Grain and Granularity, Grain Size Grain Size Class, Grain Size vs. Grain Size, grain size grain size, grain size grain size.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved