ZH
RU
ES

Isothermal compressibility

Isothermal compressibility, Total:500 items.

In the international standard classification, Isothermal compressibility involves: Chipless working equipment, Testing of metals, Rubber, Construction materials, Compressors and pneumatic machines, Fluid power systems, Pipeline components and pipelines, Seals, glands, Refrigerating technology, Products of the chemical industry, Acoustics and acoustic measurements, Geology. Meteorology. Hydrology, Shipbuilding and marine structures in general, Inland navigation vessels, Internal combustion engines for road vehicles, Refractories, Plastics, Powder metallurgy, Quality, Air quality, Products of the textile industry, Protection against dangerous goods, Fluid storage devices, Coals, Iron and steel products, Ceramics, Reinforced plastics, Materials for aerospace construction, Analytical chemistry, Mining equipment, Adhesives, Energy and heat transfer engineering in general, Rubber and plastics products, Glass, HEALTH CARE TECHNOLOGY, Leather technology, Natural gas, Equipment for petroleum and natural gas industries, Mechanical testing, Wastes, Water quality, Raw materials for rubber and plastics, Milk and milk products, Conducting materials, Aerospace fluid systems and components, Non-ferrous metals, Products of non-ferrous metals, Petroleum products in general, Insulating materials, Pumps, Inorganic chemicals, Transformers. Reactors, Fasteners for aerospace construction, Equipment for the rubber and plastics industries, Installations in buildings, Aerospace electric equipment and systems, Agricultural machines, implements and equipment, Protection of and in buildings, Cellular materials, Springs, Wind turbine systems and other alternative sources of energy, Interface and interconnection equipment, Gas and steam turbines. Steam engines.

Association Francaise de Normalisation, Isothermal compressibility

NF E63-137:2019 Press-tools - Precompressed assemblies for medium rate - General specifications
NF E63-137:1995 Press-tools. Precompressed assemblies for medium rate. General specifications.
NF E51-292:2013 Compressed air - Energy efficiency - Assessment
NF E51-292*NF EN ISO 11011:2015 Compressed air - Energy efficiency - Assessment
NF A95-121*NF EN ISO 3927:2017 Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression
NF EN ISO 3927:2017 Poudres métalliques, à l'exclusion des poudres pour métaux-durs - Détermination de la compressibilité sous compression uniaxiale
NF E51-260/A1*NF ISO 1217/A1:2016 Displacement compressors - Acceptances tests - Amendment 1 : calculation of isentropic efficiency and relationship with specific energy
NF ISO 1217/A1:2016 Compresseurs volumétriques - Essais de réception - Amendement 1 : calcul de du rendement isenthropique et relation avec l'énergie spécifique
NF E63-137:2006 Tools for pressing - Precompressed assemblies for medium rate - General specifications.
NF E51-301-1*NF ISO 8573-1:2010 Compressed air - Part 1 : contaminants and purity classes.
NF EN 1842:1997 Plastiques - Matières à mouler thermodurcissables (SMC-BMC) - Détermination du retrait au moulage par compression.
NF EN 680:2006 Détermination du retrait de séchage du béton cellulaire autoclavé
NF M82-271:1985 Coal mining equipment. Rubber-based flexible hoses for compressed air (operating pressure lower than or equal to 10 bar).
NF P19-107:1994 Determination of the drying shrinkage of autoclaved aerated concrete.
NF P19-107*NF EN 680:2006 Determination of the drying shrinkage of autoclaved aerated concrete.
NF T48-107:1994 ASBESTOS AND RUBBER COMPRESSED SHEETS FOR SEALS. RESISTANCE TO HYDRAULIC PRESSURE AT AMBIENT TEMPERATURE.
NF EN ISO 15970:2014 Gaz naturel - Mesurage des caractéristiques - Caractéristiques volumétriques : masse volumique, pression, température et facteur de compression
NF EN 17224:2019 Détermination de la résistance des adhésifs de bois au cisaillement par compression à températures élevées
NF T46-043:1983 Vulcanized rubber. Determination of compression stress relaxation at normal and elevated temperatures (annular test-pieces).
NF X20-517*NF EN ISO 15970:2014 Natural gas - Measurement of properties - Volumetric properties : density, pressure, temperature and compression factor
NF M82-200:1954 MINING EQUIPMENT. ROTARY AIR-ENGINES. POWER RATINGS.
NF T46-044:1983 Vulcanized rubber. Determination of compression stress relaxation at normal and elevated temperatures (cylindrical test-pieces).
NF T46-011-1:2008 Rubber, vulcanized or thermoplastic - Determination of compression set - Part 1 : at ambient or elevated temperatures.
NF T46-011-1:2014 Rubber, vulcanized or thermoplastic - Determination of compression set - Part 1 : at ambient or elevated temperatures
NF T46-011-1*NF ISO 815-1:2020 Rubber, vulcanized or thermoplastic - Determination of compression set - Part 1 : at ambient or elevated temperatures
NF ISO 815-1:2020 Caoutchouc vulcanisé ou thermoplastique - Détermination de la déformation rémanente après compression - Partie 1 : à températures ambiantes ou élevées
NF P75-209/A1:2006 Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions.
NF P75-209:1997 Thermal insulating products for building applications. Determination of deformation under specified compressive load and temperature conditions.
NF EN ISO 14544:2016 Céramiques techniques avancées - Propriétés mécaniques des céramiques composites à haute température - Détermination des caractéristiques en compression
NF C52-588-1*NF EN 50588-1:2018 Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kV - Part 1 : General requirements
NF EN ISO 2151:2008 Acoustique - Code d'essai acoustique pour les compresseurs et les pompes à vide - Méthode d'expertise (classe de précision 2)
NF T46-011-2*NF ISO 815-2:2020 Rubber, vulcanized or thermoplastic - Determination of compression set - Part 2 : at low temperatures
NF C52-588-1:2016 Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kV - Part 1 : general requirements

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Isothermal compressibility

GB/T 34108-2017(英文版) Metallic materials—High strain rate compression test method at ambient temperature
GB/T 42900-2023 High temperature compression test method for metallic materials with high strain rate
GB/T 13277-1991 Compressed air for general use--Quality classes
GB/T 30709-2014 Standard test method for compressibility and recovery of laminated composite gasket materials
GB/T 12622-1990 Test method for compressibility and recovery of gaskets for pipe flanges
GB 7786-1987 Limits of sound power level for noise emitted by air compressors (for power source use) and diaphragm compressors
GB/T 12622-2008 Standard test method for compressibility and recovery of gaskets for pipe flanges
GB/T 7314-2005 Metallic materials-Compression testing at ambient temperature
GB/T 30833-2014 Pneumatic fluid power.Compressible fluids consumed by equipment.Power determination and measurement of compressible air
GB/T 7314-2017(英文版) Metallic materials—Compression test method at room temperature
GB/T 19560-2008 Experimental method of high-pressure isothermal adsorption to coal
GB/T 13277.1-2008 Compressed air.Part 1:Contaminants and purity classes
GB/T 13277.1-2023 Compressed Air Part 1: Pollutant Cleaning Classes
GB/T 25861-2010 Water-source high temperature heat pumps using the vapor compression cycle
GB/T 25861-2023 Vapor compression cycle water source high temperature heat pump unit
GB/T 1685-1982 Rubber vulcanized--Determination of stress relaxation in compression at normal and elevated temperature
GB/T 6525-1986 Sintered metal materials--Determination of compression strength at room temperature
GB/T 7759-1996 Rubber, Vulcanized or thermoplastic--Determination of compression set at ambient elevated or low temperatures
GB/T 24442.2-2009 Textiles.Determination of compression property.Part 2:Constant rate method
GB/T 19560-2004 Experimental method of high-pressure adsorption isothermal to coal capacity method
GB 7022-1986 Determination of noise power level of positive displacement compressors - simple method
GB/T 7022-1986 Determination of sound power lever for noise emitted by displacement compressors--Survey method
GB 19153-2009 Minimum allowable values of energy efficiency and energy efficiency grade for displacement air compressors
GB/T 42910-2023 Test method for high temperature compressive shear strength of inorganic adhesives
GB 4980-1985 Engineering method for measuring noise sound power level of positive displacement compressor
GB/T 4980-1985 Determination of sound power level for noise emitted by displacement compressors--Engineering method
GB/T 18443.3-2001 Testing method of cryo-insulation pressure vessels leakage measurement
GB/T 1685-2008 Rubber,vulcanized or thermoplastic.Determination of stress relaxation in compression at ambient and at elevated temperatures
GB/T 6427-1999 Test method for frequency temperature stability of piezoelectric ceramic vibrator
GB/T 18443.4-2001 Testing method of cryo-insulation pressure vessels leak and outgassing rate measurement
GB/T 18443.5-2001 Testing method of cryo-insulation pressure vessels static vaporation rate measurement
GB/T 29918-2023 Test method for pressure-composition isotherm (PCI) of rare earth hydrogen storage alloys
GB/T 29723.3-2013 Grade and limit of major process energy consumption for coal mine.Part 3:Air compressor system
GB/T 42655-2023 Test method for high temperature compression performance of continuous fiber reinforced ceramic matrix composites
GB/T 7759.1-2015 Rubber, vulcanized or thermoplastic.Determination of compression set.Part 1:At ambient or elevated temperatures
GB/T 29918-2013 Method for measuring pressure-composition isotherms of RE-base AB<下标5> hydrogen storage alloys
GB/T 20672-2006 Cellular plastics,rigid-Determination of compressive creep under specified load and temperature conditions

工业和信息化部, Isothermal compressibility

YS/T 1551-2022 Room temperature high strain rate compression test method for titanium alloys
JB/T 14063-2022 Fully enclosed scroll refrigerant compressor for high temperature heat pumps
JB/T 13778-2020 Positive temperature coefficient thermistor chip for compressor starter
JB/T 14164-2022 Energy efficiency limits and energy efficiency grades of water ring vacuum pumps and water ring compressors
JC/T 2406-2017 Test method for compressive properties of continuous fiber reinforced ceramic matrix composites at room temperature

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Isothermal compressibility

GB/T 34108-2017 Metallic materials—High strain rate compression test method at ambient temperature
GB/T 7314-2017 Metallic materials—Compression test method at room temperature
GB/T 33291-2016 Measurement method of pressure-composition-temperature for reversable hydrogen asborption & desorption of hydrides

American Society for Testing and Materials (ASTM), Isothermal compressibility

ASTM D1229-03(2008) Standard Test Method for Rubber Property-Compression Set at Low Temperatures
ASTM E209-00(2005) Standard Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates
ASTM E209-00(2010) Standard Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates
ASTM E209-18 Standard Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates
ASTM D7361-07(2012) Standard Test Method for Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
ASTM D7361-07 Standard Test Method for Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
ASTM E9-89(1995) Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
ASTM E9-09(2018) Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
ASTM E9-19 Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
ASTM D5856-15 Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter
ASTM D5919-96 Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by a Micro-Isotherm Technique for Adsorbates at ppb Concentrations
ASTM D5919-96(2001) Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by a Micro-Isotherm Technique for Adsorbates at ppb Concentrations
ASTM D5919-96(2006) Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by a Micro-Isotherm Technique for Adsorbates at ppb Concentrations
ASTM D5919-96(2011) Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by a Micro-Isotherm Technique for Adsorbates at ppb Concentrations
ASTM E9-09 Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
ASTM E9-89a(1995) Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
ASTM E9-89a(2000) Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
ASTM D5856-95(2007) Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter
ASTM D5856-95(2002) Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter
ASTM D5856-95(2002)e1 Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter
ASTM D5856-95 Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter
ASTM F36-15(2021) Standard Test Method for Compressibility and Recovery of Gasket Materials
ASTM D1229-03 Standard Test Method for Rubber Property8212;Compression Set at Low Temperatures
ASTM C165-07(2017) Standard Test Method for Measuring Compressive Properties of Thermal Insulations
ASTM D1229-03(2015) Standard Test Method for Rubber Property&x2014;Compression Set at Low Temperatures
ASTM C356-03 Standard Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat
ASTM B998-17 Standard Guide for Hot Isostatic Pressing (HIP) of Aluminum Alloy Castings
ASTM A516/A516M-03 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
ASTM A516/A516M-05 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
ASTM D2879-83 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ASTM D2879-86 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ASTM D2879-18 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ASTM D3860-98 Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by Aqueous Phase Isotherm Technique
ASTM D3860-98(2003) Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by Aqueous Phase Isotherm Technique
ASTM D3860-98(2008) Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by Aqueous Phase Isotherm Technique
ASTM D3860-98(2014) Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by Aqueous Phase Isotherm Technique
ASTM D1229-87(1997)e1 Standard Test Method for Rubber Property-Compression Set at Low Temperatures
ASTM D1229-03(2019) Standard Test Method for Rubber Property—Compression Set at Low Temperatures
ASTM A672/A672M-09 Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures
ASTM A672/A672M-09e1 Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures
ASTM A672/A672M-14 Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures
ASTM C356-87(1997) Standard Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat
ASTM C356-17 Standard Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat
ASTM A662/A662M-01e1 Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service

CZ-CSN, Isothermal compressibility

CSN ON 10 5104-1963
CSN ISO 815:1994 Rubber,vulcanized or thermoplastic;determination of compression set at ambient,elevated or low temperatures
CSN 72 6030-1976 Refractory products. Determination of refractoriness under load and of creep in compression at high temperature

National Fire Protection Association (NFPA), Isothermal compressibility

NFPA 1H PART 6 CHAPTER 63-2003 Compressed Gases and Cryogenic Fluids
NFPA 55 ERTA-2010 Compressed Gases and Cryogenic Fluids Code
NFPA 55 ERTA-2013 Compressed Gases and Cryogenic Fluids Code
NFPA 55 AMD 2-2013 Compressed Gases and Cryogenic Fluids Code
NFPA 55H-2010 Compressed Gases and Cryogenic Fluids Code Handbook (Effective Date: 06/15/2009)
NFPA 55 AMD 1-2012 Compressed Gases and Cryogenic Fluids Code (Effective Date: November 19, 2012)
NFPA 55-2016 Compressed Gases and Cryogenic Fluids Code (Effective Date: June 15, 2015)

ZA-SANS, Isothermal compressibility

SANS 6085:2006 Concrete tests - Initial drying shrinkage and wetting expansion of concrete
SANS 1470-1:2008 Sound power labelling Part 1: Compressors
SANS 1470-1:1999 Specification Sound power labelling Part 1: Compressors
SANS 3380:2010 Leather - Physical and mechanical tests - Determination of shrinkage temperature up to 100 °C
SANS 10815:2003 Rubber, vulcanized or thermoplastic - Determination of compression set at ambient, elevated or low temperatures
SANS 10815-1:2009 Rubber, vulcanized or thermoplastic - Determination of compression set Part 1: At ambient or elevated temperatures

International Organization for Standardization (ISO), Isothermal compressibility

ISO 11011:2013 Compressed air.Energy efficiency.Assessment
ISO 2921:1975 Title missing - Legacy paper document
ISO 2921:2011 Rubber, vulcanized - Determination of low-temperature retraction (TR test)
ISO 3948:1977 Shipbuilding; Inland vessels; Compressed-air systems; Pressure ranges
ISO/CD 18483:2023 Performance rating of Centrifugal Refrigerant Compressor
ISO/CD 18501:2023 Performance rating of Positive Displacement Refrigerant Compressor
ISO 3384:1979 Rubber, vulcanized — Determination of stress relaxation in compression at normal and at elevated temperatures
ISO 8573-1:2001 Compressed air - Part 1: Contaminants and purity classes
ISO 2577:1975 Plastics — Thermosetting moulding materials — Determination of shrinkage of compression moulded test specimens in the form of bars
ISO 815:1991 Rubber, vulcanized or thermoplastic; determination of compression set at ambient, elevated or low temperatures
ISO 3384:1986 Rubber, vulcanized; Determination of stress relaxation in compression at ambient and at elevated temperatures
ISO 2151:1972 Measurement of airborne noise emitted by compressor/primemover-units intended for outdoor use (To be replaced by future ISO 3989 of TC 43)
ISO 3380:2002 Leather - Physical and mechanical tests - Determination of shrinkage temperature up to 100 °C
ISO 3380:2015 Leather - Physical and mechanical tests - Determination of shrinkage temperature up to 100 °C
ISO 15970:2008 Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor
ISO 3384:2005 Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression at ambient and at elevated temperatures
ISO 8573-1:1991 Compressed air for general use; part 1: contaminants and quality classes
ISO 3384:1999 Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression at ambient and at elevated temperatures
ISO 815:1972 Vulcanized rubbers; Determination of compression set under constant deflection at normal and high temperatures
ISO/TS 17996:2023 | IDF/RM 205 Cheese — Determination of rheological properties by uniaxial compression at constant displacement rate
ISO/TS 17996:2006 | IDF/RM 205:2006 Cheese — Determination of rheological properties by uniaxial compression at constant displacement rate
ISO/TS 17996:2023 | IDF/RM 205:2023 Cheese — Determination of rheological properties by uniaxial compression at constant displacement rate
ISO 8573-1:2001/Cor 1:2002 Compressed air - Part 1: Contaminants and purity classes; Technical Corrigendum 1
ISO 815:1991/Cor 1:1993 Rubber, vulcanized or thermoplastic; determination of compression set at ambient, elevated or low temperatures; Technical Corrigendum 1
ISO 12165:2019 Tools for moulding — Components of compression and injection moulds and diecasting dies — List of equivalent terms and symbols
ISO 6771:1987 Aerospace; Fluid systems and components; Pressure and temperature classifications
ISO 815-1:2008 Rubber, vulcanized or thermoplastic - Determination of compression set - Part 1: At ambient or elevated temperatures
ISO 815-1:2014 Rubber, vulcanized or thermoplastic - Determination of compression set - Part 1: At ambient or elevated temperatures
ISO 1653:1975 Vulcanized rubbers; Determination of compression set under constant deflection at low temperatures
ISO 3384-2:2012 Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression - Part 2: Testing with temperature cycling
ISO 815-1:2019 Rubber, vulcanized or thermoplastic — Determination of compression set — Part 1: At ambient or elevated temperatures
ISO/TS 17996:2023 Cheese — Determination of rheological properties by uniaxial compression at constant displacement rate
ISO 815-2:2019 Rubber, vulcanized or thermoplastic — Determination of compression set — Part 2: At low temperatures
ISO 3384:1991/Cor 1:1992 Rubber, vulcanized or thermoplastic; determination of stress relaxation in compression at ambient and at elevated temperatures; technical corrigendum 1
ISO 15105-2:2003 Plastics - Film and sheeting - Determination of gas transmission rate - Part 2: Equal-pressure method
ISO 5893:2019 Rubber and plastics test equipment — Tensile, flexural and compression types (constant rate of traverse) — Specification
ISO 14428:2004 Carbonaceous materials for the production of aluminium-Cold and tepid ramming pastes-Expansion/shrinkage during baking
ISO 14428:2005 Carbonaceous materials for the production of aluminium - Cold and tepid ramming pastes - Expansion/shrinkage during baking
ISO 7616:1986 Cellular plastics, rigid; Determination of compressive creep under specified load and temperature conditions

British Standards Institution (BSI), Isothermal compressibility

BS ISO 11011:2013 Compressed air. Energy efficiency. Assessment
BS ISO 4666-3:2016 Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testing. Compression flexometer (constant-strain type)
BS ISO 4666-3:2010 Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testing. Compression flexometer (constant-strain type)
BS EN ISO 11011:2015 Compressed air. Energy efficiency. Assessment
BS ISO 8573-1:2010 Compressed air - Contaminants and purity classes
BS EN ISO 3927:2017 Tracked Changes. Metallic powders, excluding powders for hardmetals. Determination of compressibility in uniaxial compression
BS ISO 3384:2000 Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression at ambient and at elevated temperatures
BS EN 17224:2019 Determination of compressive shear strength of wood adhesives at elevated temperatures
BS 903-A6:1992 Physical testing of rubber - Method for determination of compression set at ambient, elevated or low temperatures
BS ISO 15970:2008 Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor
BS EN ISO 15970:2014 Natural gas. Measurement of properties. Volumetric properties: density, pressure, temperature and compression factor
BS ISO 815-1:2014 Rubber, vulcanized or thermoplastic. Determination of compression set. At ambient or elevated temperatures
BS ISO 815-1:2009 Rubber, vulcanized or thermoplastic. Determination of compression set. At ambient or elevated temperatures
BS ISO 815-1:2008 Rubber, vulcanized or thermoplastic - Determination of compression set - At ambient and elevated temperatures
BS ISO 15105-2:2003 Plastics - Film and sheeting - Determination of gas-transmission rate - Equal-pressure method
BS ISO 815-1:2019 Rubber, vulcanized or thermoplastic. Determination of compression set - At ambient or elevated temperatures
BS ISO 3384-1:2011+A1:2013 Rubber, vulcanized or thermoplastic. Determination of stress relaxation in compression. Testing at constant temperature
DD ISO/TS 17996:2006 Cheese. Determination of rheological properties by uniaxial compression at constant displacement rate
PD ISO/TS 17996:2023 Cheese. Determination of rheological properties by uniaxial compression at constant displacement rate
BS ISO 815-2:2019 Rubber, vulcanized or thermoplastic. Determination of compression set - At low temperatures
BS 4742-3:1985 Hydraulic equipment for agricultural machinery. Specification for dimensions and pressure rating of single-acting telescopic tipping cylinders for trailers
BS ISO 6953-3:2013 Pneumatic fluid power. Compressed air pressure regulators and filter-regulators. Alternative test methods for measuring the flow-rate characteristics of pressure regulators
BS EN 50588-1:2015+A1:2016 Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kV. General requirements
BS EN 50588-1:2017 Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kV. General requirements
BS ISO 815-2:2014 Rubber, vulcanized or thermoplastic. Determination of compression set. At low temperatures
BS ISO 815-2:2009 Rubber, vulcanized or thermoplastic. Determination of compression set. At low temperatures
BS ISO 815-2:2008 Rubber, vulcanized or thermoplastic - Determination of compression set - At low temperatures
BS ISO 15500-23:2023 Road vehicles. Compressed natural gas (CNG) fuel system components - Gas temperature sensor
BS ISO 12165:2019 Tools for moulding. Components of compression and injection moulds and diecasting dies. List of equivalent terms and symbols
BS ISO 14428:2004 Carbonaceous materials for the production of aluminium - Cold and tepid ramming pastes - Expansion/shrinkage during baking
DD ENV 12291-1996 Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure. Determination of compression properties
BS ISO 5893:2002 Rubber and plastics test equipment - Tensile, flexural and compression types (constant rate of traverse) - Specification

ES-UNE, Isothermal compressibility

UNE-EN ISO 11011:2015 Compressed air - Energy efficiency - Assessment (ISO 11011:2013)
UNE-EN 17224:2020 Determination of compressive shear strength of wood adhesives at elevated temperatures

German Institute for Standardization, Isothermal compressibility

DIN EN ISO 11011:2015-08 Compressed air - Energy efficiency - Assessment (ISO 11011:2013); German version EN ISO 11011:2015
DIN 50106:2023-02 Testing of metallic materials - Compression test at room temperature
DIN EN 1842:1997-11 Plastics - Thermoset moulding compounds (SMC - BMC) - Determination of compression moulding shrinkage; German version EN 1842:1997
DIN 58651-2:1997-10 Respiratory protective devices - Self-contained closed-circuit breathing apparatus, compressed oxygen type - Part 2: Short duration-compressed oxygen type for moderate work rates; requirements, testing, marking
DIN EN ISO 3927:2018 Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression (ISO 3927:2017)
DIN 8979:1973 High temperature test for refrigeration motor compressors
DIN EN 680:2006-03 Determination of the drying shrinkage of autoclaved aerated concrete; German version EN 680:2005
DIN 53885:1998-12 Textiles - Determination of compression of textiles and textile products
DIN EN 17224:2019-09 Determination of compressive shear strength of wood adhesives at elevated temperatures; German version EN 17224:2019
DIN ISO 815:2000 Rubber, vulcanized or thermoplastic - Determination of compression set at ambient, elevated or low temperatures (ISO 815:1991 + ISO 815:1991/Cor.1:1993)
DIN EN ISO 3380:2003 Leather - Physical and mechanical tests - Determination of shrinkage temperature up to 100 °C (ISO 3380:2002); German version EN ISO 3380:2002
DIN EN ISO 15970:2014-09 Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor (ISO 15970:2008); German version EN ISO 15970:2014
DIN EN 17224:2019 Determination of compressive shear strength of wood adhesives at elevated temperatures
DIN ISO 3384:2008 Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression at ambient and at elevated temperatures (ISO 3384:2005);English version of DIN ISO 3384:2008-07
DIN EN ISO 11011:2015 Compressed air - Energy efficiency - Assessment (ISO 11011:2013); German version EN ISO 11011:2015

BR-ABNT, Isothermal compressibility

ABNT MB-71-1972

Professional Standard - Aviation, Isothermal compressibility

HB 7571-1997 High temperature compression test method for metals

Professional Standard - Machinery, Isothermal compressibility

JB/T 53073-1999 Diaphragm compressor product quality classification
JB/T 9141.4-1999 Test method for compressibility and recovery of flexible graphite sheets
JB/T 50159-1999 Compressed air station. Grading of energy consumption (only for internal use)
JB/T 7106-1993 Air plasma arc cutting water injection arc cutters
JB/T 50016-1999 Reciprocating Piston Medium Pressure Oxygen Compressor Product Quality Grading
JB/T 53188-1999 Product quality classification of reciprocating piston acetylene compressors
JB/T 9141.4-2013 Flexible graphite sheets.Part 4: Test method for compressibility and recovery
JB/T 12517.2-2015 Isothermal forging hydraulic press.Part 2: Testing of the accuracy
JB/T 53278-1999 General purpose axial flow compressor product quality classification
JB/T 53055-1999 Product quality classification of reciprocating piston nitrogen and hydrogen compressors
JB/T 53148-1999 Product quality classification of non-lubricated reciprocating piston high-pressure oxygen compressors
JB/T 53175-2000 Product Quality Grading of Annular Valve Plates of Reciprocating Piston Compressors
JB/T 53176-1999 Product quality classification of medium and high pressure vehicle-mounted air-cooled reciprocating piston air compressors
JB/T 53054-1999 Product quality classification of reciprocating piston air compressors for general use
JB/T 53225-2000 Product quality classification of oil-injected sliding vane air compressors for general use
JB/T 53056-1999 Product quality classification of oil-injected screw air compressors for general use
JB/T 53250-1999 Product quality classification of air-cooled sliding vane air compressors for tank trucks
JB/T 53187-1997 Product quality classification of non-lubricated liquefied petroleum gas circulating compressors
JB/T 53026-1999 Product quality classification of non-lubricated reciprocating piston high-purity nitrogen compressors
JB/T 12517.1-2015 Isothermal forging hydraulic press.Part 1: Types and basic parameters
JB/T 63187-1997 Product quality classification of non-lubricated liquefied petroleum gas circulating compressors (internal use)

AENOR, Isothermal compressibility

UNE 86609:1985 REFRIGERATING MACHINERY OF MECHANICAL COMPRESSION. FRACTION POWER
UNE-EN 680:2006 Determination of the drying shrinkage of autoclaved aerated concrete
UNE-EN ISO 3927:2011 Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression (ISO 3927:2011)
UNE-EN 1842:1998 PLASTICS. THERMOSET MOULDING COMPOUNDS (SMC - BMC). DETERMINATION OF COMPRESSION MOULDING SHRINKAGE
UNE 22070:1992 COMPRESSED AIR HOSES. ELECTRIC CONDUCTIVITY. TESTING METHOD AND SPECIFICATIONS.
UNE-EN ISO 15970:2014 Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor (ISO 15970:2008)
UNE-ISO 5893:2012 Rubber and plastics test equipment. Tensile, flexural and compression types (constant rate of traverse). Specification.
UNE-ISO 815-1:2011 Rubber, vulcanized or thermoplastic -- Determination of compression set -- Part 1: At ambient or elevated temperatures
UNE-ISO 815-2:2011 Rubber, vulcanized or thermoplastic -- Determination of compression set -- Part 2: At low temperatures

Group Standards of the People's Republic of China, Isothermal compressibility

T/TLRIA 0002-2017 With stant high temperature and high pressure compression rubber element for packer
T/SARI 0005-2019 The minimum allowable values of the energy efficiency and energy efficiency grades for water-source high-temperature heat pump unit
T/CSTM 00189-2021 Refractory materials — Determination of poisson ratio at room temperature — Static compressive method
T/SZMES 2-2020 Energy consumption test and rating method of mold temperature control system for die casting

American National Standards Institute （ANSI), Isothermal compressibility

ANSI/ASTM E209:2000 Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates
ANSI/AHRI 530-2011 Rating of Sound and Vibration for Refrigerant Compressors
ASTM D7361-07(2023) Standard Test Method for Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
ANSI/NFPA 55-2012 Compressed Gases and Cryogenic Fluids Code
ANSI/AHRI 551/591(SI) with Addendum 1-2012 Performance Rating of Water-Chilling and Heat Pump Water-Heating Packages Using the Vapor Compression Cycle
ANSI/AHRI 551/591-2011 Performance Rating of Water-Chilling and Heat Pump Water-Heating Packages Using the Vapor Compression Cycle

Indonesia Standards, Isothermal compressibility

SNI 05-3087-1992 Refrigerating compressor, Standards condition of rating temperatur
SNI ISO 815-2:2014 Rubber, vulcanized or thermoplastic – Determination of compression set – Part 2: At low temperatures

RO-ASRO, Isothermal compressibility

STAS 11269-1988 Refrigerating equipment COMPRESSORS Reference temperatures
STAS 128/2-1981 Refractory products DIFFERFNTIAL DETFRMINATION OF COMPRESSION DEFORMATION TEMPERATFRE

Korean Agency for Technology and Standards (KATS), Isothermal compressibility

KS B 6226-2001 Standard conditions of rating temperaturefor refrigerating compressors
KS B 6226-1974 Standard conditions of rating temperaturefor refrigerating compressors
KS B ISO 8573-1-2003(2008) Compressed air－Contaminants and purity classes
KS M 6670-2006 Testing method for low-temperature compression set of vulcanized elastomers
KS V ISO 3948:2005 Inland vessels-Compressed-air systems-Pressure ranges
KS V 0824-2011(2021) Temperature environmental test procedure for compressors and pumps under cryogenic condition
KS B ISO 8573-1:2003 Compressed air-Contaminants and purity classes
KS B ISO 7183-2:2002 Compressed air dryers-Performance ratings
KS B ISO 7183-2:2013 Compressed air dryers-Performance ratings
KS B ISO 8573-1:2013 Compressed air-Contaminants and purity classes
KS B 6226-2001(2021) Standard conditions of rating temperaturefor refrigerating compressors
KS B 6226-2001(2016) Standard conditions of rating temperaturefor refrigerating compressors
KS V 0824-2011(2016) Temperature environmental test procedure for compressors and pumps under cryogenic condition
KS M 6670-2016 Testing method for low-temperature compression set of vulcanized elastomers
KS M 6670-1995 Testing method for low-Temperature compression set of vulcanized elastomers
KS M 6670-2016(2021) Testing method for low-temperature compression set of vulcanized elastomers
KS M ISO 3380:2004 Leather－Physical and mechanical tests－Determination of shrinkage temperature up to 100℃
KS I ISO 15970:2010 Natural gas-Measurement of properties-Volumetric properties: density, pressure, temperature and compression factor
KS I ISO 15970-2010(2021) Natural gas－Measurement of properties－Volumetric properties: density, pressure, temperature and compression factor
KS I ISO 15970-2010(2016) Natural gas－Measurement of properties－Volumetric properties: density, pressure, temperature and compression factor
KS M ISO 3384:2007 Rubber, vulcanized or thermoplastic-Determination of stress relaxation in compression at ambient and at elevated temperatures
KS M ISO 3384:2014 Rubber, vulcanized or thermoplastic-Determination of stress relaxation in compression at ambient and at elevated temperatures
KS L 1601-2006 Fine ceramics(advanced ceramics, advanced technical ceramics)－Test method for compressive strength of monolithicceramics at room temperature
KS M ISO 3384-2007(2012) Rubber, vulcanized or thermoplastic－Determination of stress relaxation in compression at ambient and at elevated temperatures
KS D 0073-2002 Method of determining the PCT relations of hydrogen-absorbing alloys
KS W ISO 3191:2008 Aerospace－Nuts, anchor, self-locking, fixed, single lug,reduced series, with counterbore, with MJ threads, classifications：1 100 MPa(at ambient temperature)/235 ℃,1 100 MPa(at ambient temperature)/315 ℃ and 1 100 MPa(at ambient temperature)/425 ℃－Dimensio
KS W ISO 3191-2008(2018) Aerospace－Nuts, anchor, self-locking, fixed, single lug,reduced series, with counterbore, with MJ threads, classifications：1 100 MPa(at ambient temperature)/235 ℃,1 100 MPa(at ambient temperature)/315
KS W ISO 7332-2009(2019) Aerospace－Nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, with MJ threads, classifications：1 100 MPa (at ambient temperature)/235 ℃, 1 100 MPa (at ambient temperature)
KS M ISO 815-1:2010 Rubber, vulcanized or thermoplastic-Determination of compression set-Part 1:At ambient or elevated temperatures
KS M ISO 815-1:2015 Rubber, vulcanized or thermoplastic-Determination of compression set-Part 1:At ambient or elevated temperatures
KS D 0073-2002(2017) Method of determining the PCT relations of hydrogen-absorbing alloys
KS M ISO 815-1:2021 Rubber, vulcanized or thermoplastic —Determination of compression set —Part 1: At ambient or elevated temperatures
KS L ISO 10059-2:2013 Dense, shaped refractory products — Determination of cold compressive strength — Part 2: Test with packing
KS M ISO 7616:2010 Cellular plastics, rigid－Determination of compressive creep under specified load and temperature conditions
KS M ISO 5893:2021 Rubber and plastics test equipment — Tensile, flexural and compression types(constant rate of traverse) — Specification
KS M ISO 14428:2011 Carbonaceous materials for the production of aluminium-Cold and tepid ramming pastes-Expansion/shrinkage during baking
KS M ISO 7616-2010(2020) Cellular plastics, rigid－Determination of compressive creep under specified load and temperature conditions

Japanese Industrial Standards Committee (JISC), Isothermal compressibility

JIS B 8600:1986 Standard conditions of rating temperature for refrigerating compressors
JIS G 3115:2000 Steel plates for pressure vessels for intermediate temperature service
JIS B 8600:2021 Standard condition of rating temperature for refrigerant compressors
JIS B 8392-1:2003 Compressed air -- Part 1: Contaminants and purity classes
JIS B 8392-1:2012 Compressed air.Part 1: Contaminants and purity classes
JIS K 6262:2006 Rubber, vulcanized or thermoplastic -- Determination of compression set at ambient, elevated or low temperatures
JIS K 6262:2013 Rubber, vulcanized or thermoplastic.Determination of compression set at ambient, elevated or low temperatures
JIS B 8600:2001 Standard conditions of rating temperature for refrigerant compressors
JIS B 8390:2000 Pneumatic fluid power -- Components using compressible fluids -- Determination of flow-rate characteristics
JIS K 6272:2003 Rubber -- Tensile, flexural and compression test equipment (constant rate of traverse) -- Specification
JIS K 7126-2:2006 Plastics -- Film and sheeting -- Determination of gas-transmission rate -- Part 2: Equal-pressure method
JIS K 7132:1999 Cellular plastics, rigid -- Determination of compressive creep under specified load and temperature conditions

U.S. Air-Conditioning, Heating, and Refrigeration Institute (US-AHRI), Isothermal compressibility

ARI 530-2005 Rating of Sound and Vibration of Refrigerant Compressors

中国气象局, Isothermal compressibility

QX/T 548-2020 Solar cell power generation efficiency temperature impact level

Society of Automotive Engineers (SAE), Isothermal compressibility

SAE J1638-2004 Compression Set of Hoses or Solid Discs
SAE AMS7264A-1988 RINGS, SEALING, SILICONE RUBBER High Temperature Resistant, Low Compression Set 65 - 75
SAE AMS7264-1982 RINGS, SEALING, SILICONE RUBBER High Temperature Resistant, Low Compression Set 65 - 75
SAE AMS7264A-2007 RINGS, SEALING, SILICONE RUBBER High Temperature Resistant, Low Compression Set 65 - 75
SAE ARINC817-2006 AVIONICS DIGITAL VIDEO BUS LOW DATA RATE - UNCOMPRESSED
SAE AMS3356B-1976 SILICONE RUBBER Lubricating Oil and Compression Set Resistant, Electrical Grade 55 - 65
SAE AMS3356C-1978 SILICONE RUBBER Lubricating Oil and Compression Set Resistant, Electrical Grade 55 - 65
SAE AMS3356A-1965 SILICONE RUBBER Lubricating Oil and Compression Set Resistant, Electrical Grade 55 - 65
SAE AMS3587-1969 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Pigmented, Very Flexible, Heat Shrinkable (Low Recovery Temperature) 2 to 1 Shrink Ratio
SAE AMS3587B-1982 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Pigmented, Very Flexible, Heat-Shrinkable (Low Recovery Temperature) 2 to 1 Shrink Ratio
SAE AMS3588-1969 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Clear, Very Flexible Heat Shrinkable (Low Recovery Temperature) 2 to 1 Shrink Ratio
SAE J1349-2004 Engine Power Test Code Spark Ignition and Compression Ignition Net Power Rating R(2000)
SAE J1995-1990 Engine Power Test Code - Spark Ignition and Compression Ignition - Gross Power Rating, Standard;
SAE AMS3218C-2005 Fluorocarbon (FKM) Rubber High-Temperature-Fluid Resistant Low Compression Set 85 to 95 [Superseded: SAE AMS-R-83248A, SAE AMS-R-83248]
SAE AMS3587A-1978 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Pigmented, Very Flexible Heat Shrinkable (Low Recovery Temperature) 2 to 1 Shrink Ratio
SAE AMS3843-1962 POLYTETRAFLUOROETHYLENE SHEET TFE Fluorocarbon Resin, Asbestos Fiber Reinforced High Compressibility
SAE AMS3356D-1986 SILICONE (VMQ) RUBBER Lubricating Oil and Compression Set Resistant, Electrical Grade 55 - 65
SAE AMS3356E-2003 SILICONE (VMQ) RUBBER Lubricating Oil and Compression Set Resistant, Electrical Grade 55 - 65
SAE AMS3216G-2005 Fluorocarbon (FKM) Rubber High-Temperature - Fluid Resistant Low Compression Set 70 to 80
SAE AMS-R-83248A-2005 Rubber, Fluorocarbon Elastomer, High Temperature, Fluid, and Compression Set Resistant
SAE AMS-R-83248-1999 Rubber, Fluorocarbon Elastomer, High Temperature, Fluid, and Compression Set Resistant
SAE AMS4945E-2011 Titanium Alloy Tubing, Seamless, Hydraulic 3Al 2.5V, Controlled Contractile Strain Ratio Cold Worked, Stress Relieved
SAE AMS3843C-1986 Polytetrafluoroethylene Sheet-Asbestos Fiber Reinforced High Compressibility, Low Density
SAE AMS7280-1970 RINGS, SEALING, SYNTHETIC RUBBER High Temperature Fluid Resistant, Low Compression Set FPM Type 70 - 80
SAE AMS7280C-1984 RINGS, SEALING, FLUOROCARBON RUBBER High-Temperature-Fluid Resistant, Low Compression Set FKM Type 70-80
SAE AMS7276C-1990 RINGS, SEALING, FLUOROCARBON (FKM) RUBBER High-Temperature Fluid Resistant Very-Low Compression Set 70 - 80
SAE AMS7259A-1990 RINGS, SEALING, FLUOROCARBON (FKM) RUBBER High-Temperature-Fluid Resistant Very-Low Compression Set 85 - 95
SAE AMS7280B-1980 RINGS, SEALING, FLUOROCARBON RUBBER High-Temperature-Fluid Resistant, Low Compression Set FKM Type 70 - 80
SAE AMS7280D-1987 RINGS, SEALING, FLUOROCARBON RUBBER High Temperature Fluid Resistant, Low Compression Set FKM Type 70 - 80
SAE AMS3587E-2011 Plastic Tubing, Electrical Insulation, Irradiated Polyolefin, Pigmented, Very Flexible, Heat Shrinkable Low Recovery Temperature 2 to 1 Shrink Ratio
SAE AMS7280A-1974 RINGS, SEALING, FLUOROCARBON RUBBER High-Temperature-Fluid-Resistant, Low Compression Set FKM Type 70 - 80
SAE AMS3216F-2001 Fluorocarbon (FKM) Rubber High-Temperature - Fluid Resistant Low Compression Set 70 to 80
SAE AS7259-1983 RINGS, SEALING, FLUOROCARBON RUBBER High-Temperature-Fluid Resistant Very-Low Compression Set FKM Type 85 - 95
SAE AMS7276-1974 RINGS, SEALING, FLUOROCARBON RUBBER High-Temperature-Fluid-Resistant, Very-Low-Compression-Set FKM Type 70 - 80
SAE AMS3218B-2001 Fluorocarbon (FKM) Rubber High-Temperature-Fluid Resistant Low Compression Set 85 to 95
SAE AMS7287-2012 Fluorocarbon Elastomer (FKM) High Temperature / HTS Oil Resistant Low Compression Set / 70 to 80 Hardness, Low Temperature Tg -22 °F (-30 °C) For Seals in Oil / Fuel / Specific Hydraulic Systems
SAE AMS7276A-1989 RINGS, SEALING, FLUOROCARBON RUBBER High-Temperature-Fluid Resistant, Very-Low Compression Set FKM Type 70 - 80
SAE J1995-2014 Engine Power Test Code - Spark Ignition and Compression Ignition - Gross Power and Torque Rating

RU-GOST R, Isothermal compressibility

GOST 4071.1-1994 Refractory products with a true porosity of less than 45%. Determination of cold compressive strength
GOST 4071.1-2021 Refractory products with less than 45 % true porosity. Method for determination of compressive strength at room temperature
GOST 17433-1980 Industries purity. Compressed air grades of contamination
GOST R ISO 8573-1-2016 Compressed air. Part 1. Contaminants and purity classes
GOST R 57606-2017 Ceramic composites. Compression test method at normal temperature
GOST R 57605-2017 Ceramic composites. Test method of compression at elevated temperature
GOST 33519-2015 Polymer composites. Test method for compression at normal, low and high temperatures
GOST R 53656.2-2009 Plastics. Determination of gas-transmission rate. Part 2. Equal-pressure method
GOST 13808-1979 Rubber. Method for the determination of low temperature resistance according to elastic rebound after compression
GOST 4071.2-1994 Insulating refractory products. Determination of cold compressive strength
GOST R EN 1606-2010 Thermal insulating products in building applications. Method for determination of compressive creep
GOST 4071.2-2021 Insulating refractory products. Determination of cold compressive strength at room temperature
GOST 25.602-1980 Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for compression properties at normal, elevated and low temperatures
GOST 13767-1986 Cylindrical helical compression (tension) springs of I class and of 2 category made of round steel. Main parameters of coils
GOST 13772-1986 Cylindrical helical compression (tension) springs of II class and 3 category made of round steel. Main parameters of coils
GOST 13775-1986 Cylindrical helical compression springs of III class and of 2 category made of round steel. Main parameters of coils

Professional Standard - Chemical Industry, Isothermal compressibility

HG/T 2-162-1965 Low temperature impact compression test method for plastics
HG 20625-1997 Steel Pipe Flange Pressure Temperature Ratings (American System)
HG 20625-1997（编制说明） Steel Pipe Flange Pressure Temperature Ratings (American System)
HG 20604-1997 Steel pipe flange pressure temperature rating (European system)
HG 20604-1997（编制说明） Steel pipe flange pressure temperature rating (European system)

Taiwan Provincial Standard of the People's Republic of China, Isothermal compressibility

CNS 11871-1987 Standard Conditions of Rating Temperature for Refrigerating Compressors
CNS 10022-1983 Method of test for permanent compression set under low temperature of vulcanized rubber (→CNS 3564)

Danish Standards Foundation, Isothermal compressibility

DS/EN ISO 3927:2011 Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression
DS/EN 680:2006 Determination of the drying shrinkage of autoclaved aerated concrete
DS/EN 1842:1998 Plastics - Thermoset moulding compounds (SMC-BMC) - Determination of compression moulding shrinkage
DS/EN 680:1994 Determination of the drying shrinkage of autoclaved aerated concrete
DS/ISO 8573-1:2010 Compressed air - Part 1: Contaminants and purity classes
DS/ISO 3384:1989 Rubber, vulcanized. Determination of stress relaxation in compression at ambient and at elevated temperatures
DS/ISO 815:1979 Vulcanized rubbers — Determination of compression set under constant deflection at normal and high temperatures
DS/ISO 1653:1979 Vulcanized rubber. Determination of compression set under constant deflection at low temperatures
DS/ISO/TS 17996:2007 Cheese - Determination of rheological properties by uniaxial compression at constant displacement rate

PL-PKN, Isothermal compressibility

PN P22126-1991 Leathers. Determination of water vapour permeability in non-isothermal conditions
PN D04213-1964 Lignofol and lignostone Determination of water absorption

NO-SN, Isothermal compressibility

NS-EN 680-1994 Determination of the drying shrinkage of autoclaved aerated concrete

Lithuanian Standards Office , Isothermal compressibility

LST EN 680-2006 Determination of the drying shrinkage of autoclaved aerated concrete
LST EN ISO 3927:2011 Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression (ISO 3927:2011)
LST EN 1842-2002 Plastics - Thermoset moulding compounds (SMC - BMC) - Determination of compression moulding shrinkage
LST EN 50588-1-2015 Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kV - Part 1: General requirements

Professional Standard - Textile, Isothermal compressibility

FZ/T 20010-1993 Determination of shrinkage of wool fabrics by mild household laundering

U.S. Air-Conditioning, Heating, and Refrigeration Institute (US-AHRI), Isothermal compressibility

AHRI 530-2011 Rating of Sound and Vibration for Refrigerant Compressors

European Committee for Standardization (CEN), Isothermal compressibility

HD 398.2 S1-1979 Power transformers; part 2: temperature rise
HD 398.2 S1 A1-1988 Power transformers; part 2: temperature rise
HD 398.3 S1-1986 Power transformers; insulation levels and dielectric tests
EN ISO 15970:2014 Natural gas - Measurement of properties - Volumetric properties: density@ pressure@ temperature and compression factor
EN ISO 3380:2002 Leather Physical and mechanical tests Determination of shrinkage temperature up to 100 degrees C ISO 3380: 2002

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Isothermal compressibility

GJB 5873-2006 Determination of the linear shrinkage rate of molded vulcanizate
GJB 6476-2008 Test method for compressive properties of continuous fiber-reinforced ceramic composites at ambient temperature

Military Standard of the People's Republic of China-General Armament Department, Isothermal compressibility

GJB 8614-2015 Determination of linear shrinkage of molded vulcanized rubber
GJB 8737-2015 Test method for normal temperature compression properties of continuous fiber reinforced ceramic matrix composites

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Isothermal compressibility

ASHRAE 3859-1995 Temperature and Humidity Control During Cooling and Dehumidifying by Compressor and Evaporator Fan Speed Variation
ASHRAE PH-97-1-3-1997 Cooling Power/Efficiency Diagrams for a Compressor-Driven Metal Hydride Heat Pump
ASHRAE PH-97-6-3-1997 Investigations of the EPA Refrigerator Analysis (ERA) Software: Compressor Map and Ambient Temperature Effects

Institute of Electrical and Electronics Engineers (IEEE), Isothermal compressibility

NFPA (Fire) 55 Compressed Gases and Cryogenic Fluids Code, 2020 Edition
NFPA (Fire) 55HB10 Compressed Gases and Cryogenic Fluids Code Handbook, 2010 Edition

Professional Standard - Aerospace, Isothermal compressibility

QJ 1621-1989 Low temperature compression test method for rigid foamed plastics

GM North America, Isothermal compressibility

GM GMP.PE.051-1998 Polyethylene - Ultra High Molecular Weight, Ram Extrusion/Compression Molded Grade

SE-SIS, Isothermal compressibility

SIS SS-ISO 3384:1990 Rubber, vulcanized — Determination of stress relaxation in compression at ambient and at elevated temperatures
SIS SMS 1235-1970 Fittings oj copper alloys for piping. Pressure and temperature ratings
SIS SMS 1233-1970 Fittings of stainless steel for piping. Pressure and temperature ratings

机械工业部, Isothermal compressibility

JB/T 5978-1992 Malleable cast iron pipe flange pressure--temperature grade

NL-NEN, Isothermal compressibility

NEN-EN 747-1-1993 Furniture. Bunk bed for domestic use. Part 1: Safety requirements
NEN-EN 680-1994 Determination of the drying shrinkage of autoclaved aerated concrete

GM Daewoo, Isothermal compressibility

GMKOREA EDS-T-7414-2011 Determination of the Compressibility of a Cellular Elastomer Under a Specified force

TR-TSE, Isothermal compressibility

TS 2351-1976 PLASTICS - THERMOSETTING MOULDING MATERIALS - DETERMINATION OF SHRINKAGE OF COMPRESSION MOULDED TEST SPECIMENS ?N THE FORM OF BARS
TS 2641-1977 Vulcanized Rubbers Determination of Compression Set Under Constant Deflection At Low Temperatures

AT-ON, Isothermal compressibility

ONORM ISO 8573-1:1992 Compressed air for general use — Contaminants and quality classes
ONORM C 9436-1994 Testing of elastomers - Determination of compression set under constant deflection at normal temperature, at higher and low temperatures
ONORM M 7330-1980 Details on pressures and temperatures of nternal or external pressure containing components; erms and definitions, pressure ratings
ONORM S 5401-1990 Measuring and working conditions for the determination of sound power of machines for building constructions; motor compressors

FI-SFS, Isothermal compressibility

SFS 8688-1987

国家市场监督管理总局、中国国家标准化管理委员会, Isothermal compressibility

GB/T 6525-2019 Determination of compression strength for sintered metal materials at room temperature
GB 19153-2019 Minimum allowable values of energy efficiency and energy efficiency grades for displacement air compressors
GB/T 40408-2021 Nuclear grade isostatic graphite for high temperature gas-cooled reactor internals

GOSTR, Isothermal compressibility

GOST R 57785-2017 Polymer composites. Prepregs and premixes. Determination of compression moulding shrinkage

Professional Standard - Building Materials, Isothermal compressibility

JC/T 2284-2014 Test methods of isostatic compression strength (hydrostatic collapse strength), oil absorption and floatation ratio for hollow glass microspheres

Professional Standard - Energy, Isothermal compressibility

NB/T 10888-2021 High-pressure isothermal adsorption test method for coal—gravimetric method

ES-AENOR, Isothermal compressibility

UNE 53-611-1985

IN-BIS, Isothermal compressibility

Shanghai Provincial Standard of the People's Republic of China, Isothermal compressibility

DB31/ 641-2012 Energy efficiency limit value and energy efficiency grade of water source high temperature heat pump unit

BE-NBN, Isothermal compressibility

NBN-ISO 815:1994 Rubber, vulcanized or thermoplastic. Determination of compression set at ambient, elevated or low temperatures
NBN T 31-003-1976 Vulcanized rubbers - Determination of compression set under constant deflection at normal and high temperatures
NBN T 31-004-1976 Vulcanized rubbers - Determination of compression set under constant deflection at low temperatures

CEN - European Committee for Standardization, Isothermal compressibility

EN ISO 3380:2015 Leather - Physical and mechanical tests - Determination of shrinkage temperature up to 100° C
PREN 17224-2018 Determination of compressive shear strength of wood adhesives at elevated temperatures

National Metrological Technical Specifications of the People's Republic of China, Isothermal compressibility

JJF 1261.23-2017 Rules of Metrology Testing for Energy Efficiency of Displacement Air Compressors

International Telecommunication Union (ITU), Isothermal compressibility

ITU-R QUESTION 19-1/6-2009 Bit-rate reduction coding of audio signals for broadcasting applications
ITU-R BT.1620-2003 Data structure for DV-based audio, data and compressed video at a data rate of 100 Mbit/s Question ITU-R 12/6

Aerospace Industries Association/ANSI Aerospace Standards, Isothermal compressibility

AIA/NAS NAS 1688-1964 Hose Assembly, Tetrafluoroethylene High Temperature, Medium Pressure, Flared
AIA/NAS NAS 1689-1964 Hose Assembly, Tetrafluoroethylene High Temperature, Medium Pressure, Flareless

SAE - SAE International, Isothermal compressibility

SAE J1349-1990 Engine Power Test Code Spark Ignition and Compression Ignition Net Power Rating R(2000)
SAE J1349-2008 Engine Power Test Code—Spark Ignition and Compression Ignition—Net Power Rating
SAE J1349-1983 Engine Power Test Code - Spark Ignition and Diesel
SAE J1349-1980 Engine Power Test Code - Spark Ignition and Diesel
SAE J1349-1985 Engine Power Test Code - Spark Ignition and Diesel
SAE AMS3218-1997 Fluorocarbon (FKM) Rubber; High-Temperature-Fluid Resistant; Low Compression Set 85 to 95
SAE AMS3218D-2017 Fluorocarbon (FKM) Rubber High-Temperature-Fluid Resistant Low Compression Set 85 to 95 [Superseded: SAE AMS-R-83248A, SAE AMS-R-83248]
SAE AMS3843C-1991 Polytetrafluoroethylene Sheet Asbestos Fiber Reinforced High Compressibility@ Low Density
SAE AMS3843D-2014 Polytetrafluoroethylene Sheet Asbestos Fiber Reinforced High Compressibility@ Low Density
SAE J1649/1-1993 Compressed Air for General Use- Part 1: Contaminants and Quality Classes@ Standard
SAE AMS7259C-1997 Rings@ Sealing@ Fluorocarbon (FKM) Rubber High-Temperature- Fluid Resistant Very-Low Compression Set 85 to 95
SAE AMS7276G-2001 Rings@ Sealing@ Fluorocarbon (FKM) Rubber High-Temperature-Fluid Resistant Low Compression Set 70 to 80
SAE AMS7276B-1984 RINGS@ SEALING@ FLUOROCARBON (FKM) RUBBER High-Temperature Fluid Resistant Very Low Compression Set 70 - 80
SAE AMS7276F-1998 Rings@ Sealing@ Fluorocarbon (FKM) Rubber High-Temperature-Fluid Resistant Low Compression Set 70 to 80
SAE AMS7276D-1992 Rings@ Sealing@ Fluorocarbon (FKM) Rubber High-Temperature- Fluid Resistant Very-Low Compression Set 70 - 80 ((Superseded AMS 7280F))
SAE AMS7259B-1992 Rings@ Sealing@ Fluorocarbon (FKM) Rubber High-Temperature- Fluid Resistant Very-Low Compression Set 85 - 95
SAE AMS7276E-1997 Rings@ Sealing@ Fluorocarbon (FKM) Rubber High-Temperature- Fluid Resistant Very-Low Compression Set 70 to 80
SAE AMS7280E-1989 RINGS@ SEALING@ FLUOROCARBON RUBBER HIGH TEMPERATURE FLUID RESISTANT@ LOW COMPRESSION SET FKM TYPE 70 - 80
SAE AMS7280F-1992 RINGS@ SEALING@ FLUOROCARBON RUBBER HIGH TEMPERATURE FLUID RESISTANT@ LOW COMPRESSION SET FKM TYPE 70 - 80
SAE AMS3216E-1998 Fluorocarbon (FKM) Rubber High-Temperature - Fluid Resistant Low Compression Set 70 - 80
SAE AMS3218A-1998 Fluorocarbon (FKM) Rubber High-Temperature-Fluid Resistant Low Compression Set 85 to 95
SAE AMS3216D-1997 Fluorocarbon (FKM) Rubber High-Temperature - Fluid Resistant Low Compression Set 70 - 80

YU-JUS, Isothermal compressibility

JUS G.S2.147-1990 Rubber, vulcanized. Determination of stress relaxation in compression at. ambient and at elevated temperatures
JUS G.S2.608-1980 Plastics. Thermosetting moulding materials. Determination of shrinkage of compression moulded test specimens in the form of bars
JUS B.D8.318-1986 Refractories. Methods of phisical testing. Determination ofcreep constant compression atconstant temperature

Professional Standard - Railway, Isothermal compressibility

TB/T 3124-2005 Compressed air quality grades and measurement methods for rolling stock brakes

U.S. Air Force, Isothermal compressibility

AIR FORCE QPL-87257-2-2006 HYDRAULIC FLUID, FIRE RESISTANT, LOW TEMPERATURE, SYNTHETIC HYDROCARBON BASE, AIRCRAFT AND MISSILE

International Electrotechnical Commission (IEC), Isothermal compressibility

IEC 62677-2:2017 Heat shrinkable low and medium voltage moulded shapes - Part 2: Methods of test
IEC 62677-3-102:2018 Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 102: Heat-shrinkable, polyolefin, anti-tracking moulded shapes for medium voltage applica

European Committee for Electrotechnical Standardization（CENELEC）, Isothermal compressibility

EN 50588-2:2018 Medium power transformers 50 Hz@ with highest voltage for equipment not exceeding 36 kV - Part 2: Transformers with cable boxes on the high-voltage and/or low-voltage side - General requirements for transformers with rated power less than or equal to 3 15
EN 50588-1:2017 Medium power transformers 50 Hz@ with highest voltage for equipment not exceeding 36 kV - Part 1: General requirements

Standard Association of Australia （SAA）, Isothermal compressibility

AS 1683.13:1992 Methods of test for elastomers - Compression set of vulcanized rubber under constant deflection
AS 1012.19.2:2000(R2014)

ESDU - Engineering Sciences Data Unit, Isothermal compressibility

ESDU 99011 A-2003 Thermal conductivity@ viscosity@ isobaric specific heat capacity and Prandtl number of gases at low pressure: Aliphatic hydrocarbons - alkanes.
ESDU 09013-2009 Initial buckling of flat isosceles triangular plates under compression reacted by compression and/or shear
ESDU 02004 A-2003 Thermal conductivity@ viscosity@ isobaric specific heat capacity and Prandtl number of gases at low pressure: halogenated hydrocarbons - haloethanes.
ESDU 00052-2001 Thermal conductivity@ viscosity@ isobaric specific heat capacity and Prandtl number of gases at low pressure: oxygenated hydrocarbons - aliphatic esters.
ESDU 02003-2002 Thermal conductivity@ viscosity@ isobaric specific heat capacity and Prandtl number of gases at low pressure: halogenated hydrocarbons - halomethanes.
AERO C.04.01.01 B-1989 Rate of change of hinge-moment coefficient with incidence for a plain control in incompressible two-dimensional flow@ (b sub 1) sub zero.
ESDU 75006 A-1976 Design for maximum structural efficiency. Isotropic sandwich panels under uniaxial compression.

KR-KS, Isothermal compressibility

KS M ISO 815-1-2021 Rubber, vulcanized or thermoplastic —Determination of compression set —Part 1: At ambient or elevated temperatures
KS M ISO 5893-2021 Rubber and plastics test equipment — Tensile, flexural and compression types(constant rate of traverse) — Specification

International Dairy Federation (IDF), Isothermal compressibility

IDF/RM 205-2006 Cheese - Determination of rheological properties by uniaxial compression at constant displacement rate

IT-UNI, Isothermal compressibility

UNI 7533-1976

VN-TCVN, Isothermal compressibility

TCVN 5320-1-2008 Rubber, vulcanized or thermoplastic.Determination of compression set.Part 1: At ambient or elevated temperatures
TCVN 5320-1-2016 Rubber,vulcanized or thermoplastic - Determination of compression set .Part 1:At ambient or elevated temperatures
TCVN 5320-2-2016 Rubber,vulcanized or thermoplastic - Determination of compression set .Part 2: At low temperatures