ZH
RU
ES

tube material

tube material, Total:182 items.

In the international standard classification, tube material involves: Materials for aerospace construction, Physics. Chemistry, Thermodynamics and temperature measurements, Furniture, Materials for the reinforcement of composites, Pipeline components and pipelines, Materials and components for railway engineering, Electrical accessories, Testing of metals, Electronic components in general, Insulating materials, Refractories, Fibre optic communications, Water quality, Dentistry, Analytical chemistry, (No title), Equipment for the chemical industry, Protection of and in buildings, Telecommunication systems.

United States Navy, tube material

NAVY MIL-P-85499-1981 PRIMER MATERIAL

CZ-CSN, tube material

CSN 13 0300-1982

RU-GOST R, tube material

PNST 63-2015 Materials from multiwall carbon nanotubes. Specifications
GOST R 56551-2015 Nanomanufacturing. Material specifications. Part 2-1. Materials from single-wall carbon nanotubes. Specifications forms
GOST R 56189-2014 Nanomanufacturing. Key control characteristics. Part 2-1. Carbon nanotubes materials. Methods of determining the sheet resistance

Society of Automotive Engineers (SAE), tube material

SAE J2495-2011 Thermal Containment Efficiency of Sleeve Materials (Stabilized Type)
SAE J2495-1999 Thermal Containment Efficiency of Sleeve Materials
SAE J2495-2008 Thermal Containment Efficiency of Sleeve Materials

Canadian General Standards Board （CGSB), tube material

CGSB 20-GP-16MA-1989 Tube Synthetique Souple Resistant Aux Carburants

Group Standards of the People's Republic of China, tube material

T/LSX 113-2018 Outdoor leisure furniture - material requirements for aluminum and iron pipes
T/CECS 10058-2019 Assessment for green building materials - plastic pipes and fittings

AT-ON, tube material

ONORM B 5160 Teil.1-1979 Glass fibre reinforced plastics pipes (GRP-pipes); Material, structure, production methods

国家市场监督管理总局、中国国家标准化管理委员会, tube material

GB/T 37152-2018 Nanotechnology—Carbon nanotube materials—Sheet resistance

Military Standards (MIL-STD), tube material

DOD A-A-51295-1985 TUBING, STERILIZATION
DOD A-A-51346-1986 CONNECTOR, ELASTIC TUBING
DOD A-A-51348 A-1992 CONNECTOR, ELASTIC TUBING, BRANCHED, PLASTIC, T-SHAPED

(U.S.) Plastic Pipe Association, tube material

PPI TR-19-2020 CHEMICAL RESISTANCE OF PLASTIC PIPING MATERIALS
PPI STATEMENT W-2004 Position Statement on Improved Material Categories for Polyethylene Pressure Pipe

(U.S.) Ford Automotive Standards, tube material

FORD WSS-M98P14-A1-2021 PERFORMANCE OF PLASTIC FUEL TUBE MATERIALS USED IN FLEX FUELS
FORD WSS-M98P14-A1-2011 PERFORMANCE OF PLASTIC FUEL TUBE MATERIALS USED IN FLEX FUELS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M98P14-A10-2021 PERFORMANCE OF PLASTIC FUEL TUBE MATERIALS USED IN CNG FUELS (Shown on FORD WSS-M98P14-A1)
FORD WSS-M98P14-A10-2011 PERFORMANCE OF PLASTIC FUEL TUBE MATERIALS USED IN CNG FUELS ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M98P14-A1
FORD WSS-M98P14-A5-2021 PERFORMANCE OF PLASTIC FUELTUBE MATERIALS USED IN BIO-DIESEL FUELS (Shown on FORD WSS-M98P14-A1)
FORD WSS-M98P14-A1-2014 PERFORMANCE OF PLASTIC FUEL TUBE MATERIALS USED IN FLEX FUELS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M98P14-A2-2021 PERFORMANCE OF ELASTOMERIC FUEL HOSE MATERIAL USED IN FLEX FUELS (Shown on FORD WSS-M98P14-A1)
FORD WSS-M98P14-A6-2021 PERFORMANCE OF ELASTOMERIC FUEL HOSE MATERIALS USED IN BIO-DIESEL FUELS (Shown on FORD WSS-M98P14-A1)
FORD WSS-M98P14-A10-2014 PERFORMANCE OF PLASTIC FUEL TUBE MATERIALS USED IN CNG FUELS ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M98P14-A1)

German Institute for Standardization, tube material

DIN 11866:2008 Stainless steel tubes for aseptic, chemical and pharmaceutical industries - Dimensions, materials
DIN 51102-1:1976 Testing of ceramic materials; determination of the acid resistance, method with lumpy test material for clay for severage
DIN IEC/TS 62607-2-1:2014-05*DIN SPEC 42607-2-1:2014-05 Nanomanufacturing - Key control characteristics - Part 2-1: Carbon nanotube materials - Film resistance (IEC/TS 62607-2-1:2012)
DIN EN ISO 6876:2012-10 Dentistry - Root canal sealing materials (ISO 6876:2012); German version EN ISO 6876:2012

Korean Agency for Technology and Standards (KATS), tube material

KS D ISO 9095-2005(2010) Steel tubes－Continuous character marking and colour coding for material identification
KS B ISO 8493:2001 Metallic materials Tube Drift-expanding test
KS B ISO 8494:2001 Metallic materials Tube Flanging test
KS B ISO 8492:2001 Metallic materials Tube Flattening test
KS B ISO 8495:2001 Metallic materials Tube Ring-expanding test
KS B ISO 8496:2001 Metallic materials Tube Ring tensile test
KS P 7451-2006 Dental root canal sealing materials
KS P 7451-2006(2011) Dental root canal sealing materials
KS B ISO 8491:2001 Metallic materials Tube(in full section) Bend test
KS B ISO 8491:2015 Metallic materials Tube(in full section) Bend test
KS D 2587-1990(2006) General rules for chemical analysis of nickel materials for electron tubes
KS D 1978-2002 Methods for determination of sulfur in nickel materials for electron tubes
KS D 1978-1982 Methods for determination of sulfur in nickel materials for electron tubes
KS P 7451-2014 Dental root canal sealing materials
KS P ISO 6876:2020 Dentistry — Root canal sealing materials
KS P ISO 6876:2014 Dentistry — Root canal sealing materials
KS P ISO 6876:2013 Dental root canal sealing materials
KS C IEC 62860:2018 Test methods for the characterization of organic transistors and materials

Association Francaise de Normalisation, tube material

NF F80-200:1988 Rolling stock. Tubes for fluid pipes. Materials and sizes. Selection.
NF A49-051:1991 Steel tubes. Continuous character marking and colour coding for material identification.
NF A03-092*NF EN ISO 8492:2014 Metallic materials - Tube - Flattening test
NF A03-094:2004 Metallic materials - Tube - Flanging test.
NF A03-094*NF EN ISO 8494:2014 Metallic materials - Tube - Flanging test
NF A03-093*NF EN ISO 8493:2004 Metallic materials - Tube - Drift-expanding test
NF A03-092:1994 Metallic materials. Tube. Flattening test.
NF A03-094:1994 Metallic materials. Tube. Flanging test.
NF A03-095:1994 Metallic materials. Tube. Ring expanding test.
NF A03-096:1994 METALLIC MATERIALS. TUBE. RING TENSILE TEST. (EUROPEAN STANDARD EN 10237).
NF C93-857:1997 Material used in tubes for optical fibre cables.
NF A03-096:2004 Metallic materials - Tube - Ring tensile test.
NF A03-095*NF EN ISO 8495:2014 Metallic materials - Tube - Ring-expanding test
NF A03-096*NF EN ISO 8496:2014 Metallic materials - Tube - Ring tensile test
NF A03-091*NF EN ISO 8491:2004 Metallic materials - Tube (in full section) - Bend test
NF A03-091:1994 Metallic materials. Tube (in full section). Bend test.
NF EN ISO 6876:2012 Médecine bucco-dentaire - Matériaux de scellement des canaux radiculaires
NF EN ISO 9080:2012 Systèmes de canalisations et de gaines en matières plastiques - Détermination de la résistance hydrostatique à long terme des matières thermoplastiques sous forme de tubes par extrapolation
NF S91-226*NF EN ISO 6876:2012 Dentistry - Root canal sealing materials

British Standards Institution (BSI), tube material

BS EN 13480-2:2017+A8:2021 Metallic industrial piping. Materials
BS EN 13480-2:2002+A2:2010 Metallic industrial piping. Materials
BS EN 13480-2:2012+A1:2013 Metallic industrial piping. Materials
PD IEC/TS 62607-2-1:2012 Nanomanufacturing. Key control characteristics. Carbon nanotube materials. Film resistance
BS EN 13480-2:2002 Metallic industrial piping - Materials
BS EN ISO 8493:2004 Metallic materials - Tube - Drift-expanding test (ISO 8493:1998)
BS EN ISO 8492:2013 Metallic materials. Tube. Flattening test
BS EN ISO 8494:2013 Metallic materials. Tube. Flanging test
BS EN ISO 8496:2004 Metallic materials - Tube - Ring tensile test
BS EN ISO 8496:2013 Metallic materials. Tube. Ring tensile test
BS EN ISO 8495:2013 Metallic materials. Tube. Ring-expanding test
BS EN ISO 8491:2004 Metallic materials - Tube (in full section) - Bend test
PD IEC TS 62607-2-4:2020 Nanomanufacturing. Key control characteristics. Carbon nanotube materials. Test methods for determination of resistance of individual carbon nanotubes
BS IEC 62860:2013 Test methods for the characterization of organic transistors and materials

European Committee for Standardization (CEN), tube material

EN 13480-2:2012 Metallic industrial piping - Part 2: Materials
EN 13480-2:2017 Metallic industrial piping - Part 2: Materials
EN ISO 8492:2013 Metallic materials - Tube - Flattening test
EN ISO 8494:2013 Metallic materials - Tube - Flanging test
EN ISO 8495:2013 Metallic materials - Tube - Ring-expanding test
EN ISO 8496:2013 Metallic materials - Tube - Ring tensile test
EN 10232:1993 Metallic Materials - Tube (in Full Section) - Bend Test
EN 13480-2:2017/A1:2018 Metallic industrial piping - Part 2: Materials
EN 13480-2:2012/A1:2013 Metallic industrial piping - Part 2: Materials
EN 13480-2:2012/A2:2016 Metallic industrial piping - Part 2: Materials
EN 13480-2:2017/A8:2021 Metallic industrial piping - Part 2: Materials

GM North America, tube material

GM GM2773M-1997 Flexible Air Duct Material

NL-NEN, tube material

NEN-EN 10236-1994 Metallic materials. Tube. Ring expanding test

IX-SA, tube material

AS 203:1972

VN-TCVN, tube material

TCVN 5890-2008 Metallic materials.Tube.Drift-expanding test
TCVN 314-2008 Metallic materials.Tube.Tensile test
TCVN 1829-2008 Metallic materials.Tube.Flanging test
TCVN 1830-2008 Metallic materials.Tube.Flattening test
TCVN 1832-2008 Metallic materials.Tube.Hydrolic pressure test
TCVN 5892-2008 Metallic materials.Tube.Ring-expanding test
TCVN 5891-2008 Metallic materials.Tube (in full section).Bend test

SE-SIS, tube material

SIS SS 11 26 42-1986 Metallic materials - Tubes - Flanging test
SIS SEN 0715

CEN - European Committee for Standardization, tube material

EN ISO 8494:2004 Metallic materials - Tube - Flanging test
EN ISO 8492:2004 Metallic materials - Tube - Flattening test
EN ISO 8495:2004 Metallic materials - Tube - Ring-expanding test
EN ISO 8496:2004 Metallic materials - Tube - Ring tensile test
EN 13480-2:2017/PRA7:2019 Metallic industrial piping - Part 2: Materials

International Organization for Standardization (ISO), tube material

ISO 8494:2013 Metallic materials.Tube.Flanging test
ISO 8492:2013 Metallic materials.Tube.Flattening test
ISO 8494:1998 Metallic materials - Tube - Flanging test
ISO 8492:1986 Metallic materials; Tube; Flattening test
ISO 8493:1986 Metallic materials; Tube; Drift expanding test
ISO 8494:1986 Metallic materials; Tube; Flanging test
ISO 8495:1986 Metallic materials; Tube; Ring expanding test
ISO 8495:2013 Metallic materials.Tube.Ring-expanding test
ISO 8495:1998 Metallic materials - Tube - Ring-expanding test
ISO 8496:1998 Metallic materials - Tube - Ring tensile test
ISO 8496:1986 Metallic materials; Tube; Ring tensile test
ISO 8491:1998 Metallic materials - Tube (in full section) - Bend test
ISO 8491:1986 Metallic materials; Tube (in full section); Bend test
IEC TS 62607-2-1:2012 Nanomanufacturing - key control characteristics for CNT film applications - Resistivity — Part 2-1:
ISO 6876:2001 Dental root canal sealing materials
ISO 6876:1986 Dental root canal sealing materials
ISO 6876:2012 Dentistry - Root canal sealing materials

Danish Standards Foundation, tube material

DS/ISO 8492:1989 Metallic materials. Tube. Flattening test
DS/ISO 8493:1989 Metallic materials. Tube. Drift expanding test
DS/EN ISO 8492:2004 Metallic materials - Tube - Flattening test
DS/EN ISO 8493:2004 Metallic materials - Tube - Drift-expanding test
DS/EN ISO 8495:2004 Metallic materials - Tube - Ring-expanding test
DS/EN ISO 8491:2004 Metallic materials - Tube (in full section) - Bend test
DS/EN ISO 6876:2012 Dentistry - Root canal sealing materials

IT-UNI, tube material

EC 1-2020 UNI EN ISO 8495:2020 Metallic materials - Tube - Ring-expanding test

National Association of Pipe Fabricators (NAPF), tube material

PFI ES-11-1998 Permanent Marking on Piping Materials
PFI ES-26-2002 Welded Load Bearing Attachments to Pressure Retaining Piping Materials
PFI ES-26-2013 Welded Load Bearing Attachments to Pressure Retaining Piping Materials
PFI ES-22-2013 Recommended Practice for Color Coding of Piping Materials

National Sanitation Foundation (NSF), tube material

NSF P171-1999 Chlorine Resistance of Plastic Piping Materials

BE-NBN, tube material

NBN-EN 10234-1994 Metallic materials. Tube. Drift expanding test

American Society for Testing and Materials (ASTM), tube material

ASTM D2770-93 Standard Specification for Ozone-Resisting Ethylene-Propylene Rubber Integral Insulation and Jacket for Wire and Cable
ASTM E477-13e1 Standard Test Method for Laboratory Measurements of Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers
ASTM E477-20 Standard Test Method for Laboratory Measurements of Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers

US-FCR, tube material

FCR COE EL-93-20 FINAL REPORT-1993 MANAGEMENT PLAN FOR THE DISPOSAL OF CONTAMINATED MATERIAL IN THE CRANEY ISLAND DREDGED MATERIAL MANAGEMENT AREA
FCR AF R AFLC 19-3 IMC 92-1-1992 ASBESTOS MATERIAL MANAGEMENT
FCR AF R AFLC 19-3-1990 ASBESTOS MATERIAL MANAGEMENT

ZA-SANS, tube material

SANS 8491:2003 Metallic materials - Tube (in full section) - Bend test
SANS 8496:2003 Metallic materials - Tube - Ring tensile test

RO-ASRO, tube material

STAS 3876-1985 PAVER FOR TEXTILE TUBES
STAS SR 11302-1986 Petroleum equipment. Safety clamp for tubular goods

Japanese Industrial Standards Committee (JISC), tube material

JIS T 6522:2005 Dental root canal sealing materials
JIS T 6522:2015 Dental root canal sealing materials

Lithuanian Standards Office , tube material

LST EN ISO 8492:2014 Metallic materials - Tube - Flattening test (ISO 8492:2013)
LST EN ISO 8494:2004 Metallic materials - Tube - Flanging test (ISO 8494:1998)
LST EN ISO 8493:2004 Metallic materials - Tube - Drift-expanding test (ISO 8493:1998)
LST EN ISO 8492:2004 Metallic materials - Tube - Flattening test (ISO 8492:1998)
LST EN ISO 8491:2004 Metallic materials - Tube (in full section) - Bend test (ISO 8491:1998)

AENOR, tube material

UNE-EN ISO 8494:2014 Metallic materials - Tube - Flanging test (ISO 8494:2013)
UNE-EN ISO 8492:2014 Metallic materials - Tube - Flattening test (ISO 8492:2013)
UNE-EN ISO 8493:2006 Metallic materials - Tube - Drift-expanding test (ISO 8493:1998)
UNE-EN ISO 8491:2006 Metallic materials - Tube (in full section) - Bend test (ISO 8491:1998)

Professional Standard - Chemical Industry, tube material

HG/T 20646-1999（编制说明） Design regulations for piping materials in chemical plants
HG 20519.38-1992 Pipe grade number and pipe material grade table
HG/T 20646.3-1999 Design Standard Piping Material for Chemical Plant
HG/T 20646.2-1999 Design Standard Piping Material for Chemical Plant
HG/T 20646.5-1999 Design Standard Piping Material for Chemical Plant

GOSTR, tube material

GOST 34648-2020 Fiber-reinforced thermosetting plastic pipes and parts of pipelines. Determination of plastic pipes and fittings resistance to short-time internal hydraulic pressure
GOST IEC/TS 62607-2-1-2017 Nanomanufacturing. Key control characteristics. Part 2-1. Carbon nanotubes materials. Methods of determining the sheet resistance

Professional Standard-Ships, tube material

CB* 250-1977 Water and steam piping materials and test pressures

KR-KS, tube material

KS P ISO 6876-2020 Dentistry — Root canal sealing materials
KS C IEC 62860-2018 Test methods for the characterization of organic transistors and materials
KS C IEC 62860-2018(2023) Test methods for the characterization of organic transistors and materials

Professional Standard - Military and Civilian Products, tube material

WJ/Z 301-1992 Barrel Design Material Selection

未注明发布机构, tube material

DIN EN ISO 6876:2003 Dental root canal filling materials

Professional Standard - Medicine, tube material

YY 0717-2009 Dental root canal sealing materials
YY 0717-2023 Dental root canal sealing materials

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, tube material

GB/T 18475-2001 Thermoplastics materials for pipes and fittings for pressure applications classification and designation--Overall Service(design) coefficient

IEC - International Electrotechnical Commission, tube material

TS 62607-2-1-2012 Nanomanufacturing – Key control characteristics – Part 2-1: Carbon nanotube materials – Film resistance (Edition 1.0)

Standard Association of Australia （SAA）, tube material

AS 2505.3:2004 Metallic materials - Tubular products - Bend and related tests

Indonesia Standards, tube material

SNI 04-6190.1.2-2001 Common test methods for insulating and sheathing materials of electric cables. Part 1: Methods for general application - Section 2: Thermal ageing methods

Shandong Provincial Standard of the People's Republic of China, tube material

DB37/T 312-2002 Plastic pipes for porous underground communication pipelines