ZH
RU
ES

pp pipe material

pp pipe material, Total:397 items.

In the international standard classification, pp pipe material involves: Rubber and plastics products, Products of the textile industry, Pipeline components and pipelines, Plastics, Installations in buildings, Wastes, Welding, brazing and soldering, External sewage systems, Production in the chemical industry, Manufacturing processes in the rubber and plastics industries, Energy and heat transfer engineering in general, Construction materials, Materials for aerospace construction, Fibre optic communications, Fluid storage devices, Testing of metals, (No title), Cans. Tins. Tubes, Insulating materials, Water quality, Hand-held tools, Dentistry, Valves, Materials for the reinforcement of composites, Equipment for the chemical industry, Raw materials for rubber and plastics, Industrial automation systems.

Group Standards of the People's Republic of China, pp pipe material

T/ZZB 014-2015 Civilian polypropylene random copolymer（PP-R）plastic pipes
T/QGCML 1017-2023 General specifications for plastic PP sheets
T/CSPSTC 63-2021 Specification for melt-blown polypropylene（PP）materials
T/GDID 1038-2022 Random copolymerized polypropylene (PP-R) antibacterial pipes for cold and hot water
T/ZZB 2570-2021 Polypropylene (PP) spirally enwound structural-wall pipes for underground drainage and sewerage
T/GDC 13-2019 Inne finned reinforced Polyethylene/polypropylene enwound corrugated pipe
T/CSBX 0011-2021 Fiber reinforced polypropylene multi-layer synchronously spirally enwound structure-wall pipes
T/FSS 27-2021 Foshan standard Random copolymer polypropylene(PP-R) pipes for hot and cold water installations
T/GZHG 016-2022 Flame-retardant polypropylene boron nitride (PP-BN) heat-conducting hexagonal structural wall pipe
T/BYXT 004.1-2022 Rare earth antibacterial Intermediate materials Part 1：Polypropylene (PP) masterbatch
T/GDC 142-2022 PP moment circle reinforced polyethylene winding corrugated pipe for buried drainage and sewage
T/CECS 10058-2019 Assessment for green building materials - plastic pipes and fittings
T/CSTE 0077-2021 Assessment requirements for forerunner standard- Random copolymer polypropylene(PP-R) pipes for hot and cold water installations

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, pp pipe material

GB/T 32463-2015 Identification method for material of polypropylene (PP-R,PP-B,PP-H) pipes or fittings
GB/T 13019-1991 Polypropylene (PP) pipes--Tolerances on outside diameters and wall thicknesses
GB/T 2546.1-2022 Plastics—Polypropylene (PP) moulding and extrusion materials—Part 1:Designation system and basis for specifications
GB/T 2546.2-2022 Plastics—Polypropylene(PP) moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties
GB/T 2546.2-2003 Plastics-Polypropylene (pp) moulding and extrusion materials-Part2:Preparation of test specimens and determination of properties
GB/T 2546.1-2006 Plastic.Polypropylen (PP) moulding and extrusion materials. Part 1: Designstion system and basis for specifications
GB/T 19809-2005 Plastics pipes and fittings.Preparation of polyethylene(PE)pipe/pipe or pipe/fitting test piece assemblies by butt fusion

European Committee for Standardization (CEN), pp pipe material

PD CEN/TS 14541:2013 Plastics pipes and fittings - Characteristics for utilisation of nonvirgin PVC-U, PP and PE materials
EN ISO 15874-2:2013 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes
EN ISO 15013:2022 Plastics - Extruded sheets of polypropylene (PP) - Requirements and test methods (ISO 15013:2022)
EN ISO 15013:2007 Plastics - Extruded sheets of polypropylene (PP) - Requirements and test methods
EN ISO 1873-2:2007 Plastics - Polypropylene (PP) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties
EN ISO 15874-3:2013 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings
EN ISO 15874-3:2003 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings ISO 15874-3:2003
EN ISO 1873-1:1995 Plastics - Polypropylene (PP) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications (ISO 1873-1 : 1995)
EN ISO 8492:2013 Metallic materials - Tube - Flattening test
EN ISO 8494:2013 Metallic materials - Tube - Flanging test
EN ISO 19069-2:2016 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
prEN ISO 19069-2 Plastics - Polypropylene (PP) moulding and extrusion materials - Part2: Preparation of test specimens and determination of properties (ISO/DIS 19069-2:2023)
EN ISO/TS 15874-7:2003 Plastics piping systems for hot and cold water installations �C Polypropylene (PP) �C Part 7: Guidance for the assessment of conformity
EN 12666-1:2005 Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system (Incorporates Amendment A1: 2011)
EN 13480-2:2012 Metallic industrial piping - Part 2: Materials
EN 13480-2:2017 Metallic industrial piping - Part 2: Materials
EN ISO 8495:2013 Metallic materials - Tube - Ring-expanding test
EN ISO 8496:2013 Metallic materials - Tube - Ring tensile test
EN ISO 15874-3:2013/A2:2021 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 2 (ISO 15874-3:2013/Amd 2:2021)
EN ISO 15874-3:2013/A1:2018 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 1 (ISO 15874-3:2013/Amd 1:2018)
DD ENV 1852-2-2000 Plastics Piping Systems for Non-Pressure Underground Drainage and Sewerage - Polypropylene (PP) - Part 2: Guidance for the Assessment of Conformity

Danish Standards Foundation, pp pipe material

DS/CEN/TS 14541:2013 Plastics pipes and fittings - Characteristics for utilisation of non-virgin PVC-U, PP and PE materials
DS/ISO 17555:2021 Plastics – Film and sheeting – Biaxially oriented polypropylene (PP) films
DS/EN ISO 1873-1:1996 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 1: Designation system and basis for specifications
DS/EN ISO 15874-2:2013 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes
DS/EN ISO 1873-2:2007 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
DS/ISO 8492:1989 Metallic materials. Tube. Flattening test
DS/ISO 8493:1989 Metallic materials. Tube. Drift expanding test
DS/EN ISO 8492:2004 Metallic materials - Tube - Flattening test
DS/EN ISO 8493:2004 Metallic materials - Tube - Drift-expanding test
DS/EN ISO 8495:2004 Metallic materials - Tube - Ring-expanding test
DS/ISO 11414:2009 Plastics pipes and fittings - Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion
DS/EN ISO 15874-3:2013 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings
DS/EN ISO 15874-1:2013 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General
DS/CEN ISO/TS 15874-7:2004 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 7: Guidance for the assessment of conformity
DS/EN ISO 6876:2012 Dentistry - Root canal sealing materials
DS/EN IEC 60674-3-1:2021 Plastic films for electrical purposes – Part 3: Specifications for individual materials – Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors
DS/EN 10237:1994 Metallic materials. Tube. Ring tensile test

Association Francaise de Normalisation, pp pipe material

XP P16-373*XP CEN/TS 14541:2014 Plastics pipes and fittings - Characteristics for utilisation of non-virgin PVC-U, PP and PE materials
NF EN ISO 15013:2022 Plastiques - Plaques extrudées en polypropylène (PP) - Exigences et méthodes d'essai
NF EN ISO 15874-2:2013 Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polypropylène (PP) - Partie 2 : tubes
NF T54-407:2007 Plastics - Extruded sheets of polypropylene (PP) - Requirements and test methods.
NF T54-938-2*NF EN ISO 15874-2:2013 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: pipes
NF EN ISO 15874-2/A1:2018 Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polypropylène (PP) - Partie 2 : tubes - Amendement 1
NF C93-857:1997 Material used in tubes for optical fibre cables.
NF T54-938-2/A1*NF EN ISO 15874-2/A1:2018 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2 : pipes - Amendment 1
NF T54-938-3*NF EN ISO 15874-3:2013 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: fittings
NF T54-938-1*NF EN ISO 15874-1:2013 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1 : general
NF T50-002-2:2007 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties.
NF T50-002-2*NF EN ISO 19069-2:2017 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties
NF P16-357-1:1997 Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP). Part 1 : specifications for pipes, fittings and the system.
NF A03-092*NF EN ISO 8492:2014 Metallic materials - Tube - Flattening test
NF A03-094:2004 Metallic materials - Tube - Flanging test.
NF A03-094*NF EN ISO 8494:2014 Metallic materials - Tube - Flanging test
NF A03-093*NF EN ISO 8493:2004 Metallic materials - Tube - Drift-expanding test
NF A03-092:1994 Metallic materials. Tube. Flattening test.
NF A03-094:1994 Metallic materials. Tube. Flanging test.
NF A03-095:1994 Metallic materials. Tube. Ring expanding test.
NF EN ISO 9080:2012 Systèmes de canalisations et de gaines en matières plastiques - Détermination de la résistance hydrostatique à long terme des matières thermoplastiques sous forme de tubes par extrapolation
NF EN IEC 60674-3-1:2021 Films plastiques à usages électriques - Partie 3 : spécifications pour matériaux particuliers - Feuille 1 : films de polypropylène biorienté (PP) pour condensateurs
NF A03-096:1994 METALLIC MATERIALS. TUBE. RING TENSILE TEST. (EUROPEAN STANDARD EN 10237).
NF P16-379:2016 Systèmes de canalisations en plastique pour drainage enterré - Ouvrages de drainage périphérique de bâtiments - Spécifications pour tubes en PVC-U, PE et PP et accessoires
NF T54-938-5*NF EN ISO 15874-5:2013 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5 : fitness for purpose of the system
NF T54-938-3/A1*NF EN ISO 15874-3/A1:2018 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3 : fittings - Amendment 1
NF EN ISO 15874-3:2013 Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polypropylène (PP) - Partie 3 : raccords
NF EN ISO 15874-1:2013 Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polypropylène (PP) - Partie 1 : généralités
NF EN ISO 6876:2012 Médecine bucco-dentaire - Matériaux de scellement des canaux radiculaires
NF A03-096:2004 Metallic materials - Tube - Ring tensile test.
NF A03-095*NF EN ISO 8495:2014 Metallic materials - Tube - Ring-expanding test
NF A03-096*NF EN ISO 8496:2014 Metallic materials - Tube - Ring tensile test
NF C26-145-3-1*NF EN IEC 60674-3-1:2021 Plastic films for electrical purposes - Part 3 : specifications for individual materials - Sheet 1 : biaxially oriented polypropylene (PP) film for capacitors
NF C26-145-3-1/A1*NF EN 60674-3-1/A1:2012 Plastic films for electrical purposes - Part 3 : specifications for individual materials - Sheet 1 : biaxially oriented polypropylene (PP) film for capacitors
NF C26-145-3-1*NF EN 60674-3-1:1998 Plastic films for electrical purposes. Part 3 : specifications for individual materials. Sheet 1 : biaxially oriented polypropylene (PP) film for capacitors.

GM Europe, pp pipe material

GME QK 003800-2000 Polypropylene Material Types with Fillers (PP - ..., PP/PE - ...) (English/German)
GME 00036-2011 General Requirements for Kenaf/PP Carrier Materials
GME 00034-2009 General Requirements for Re-Used Cotton/PP Carrier Materials
GME TM 944800-1992 Verbundwerkstoff, Tr鋑er auf PP-Basis Material-Development and Testing English/German
GME QK 000983-2005
GME QK 000984-2007 Blend from PP and EPDM with Minerals (English/German)
GME QK 000991-2004 Blend from PP and EPDM with Minerals (English/German)
GME QK 001000-2003
GME QK 001084-2003
GME QK 001089-2003 Blend from PP and EPDM with Minerals (English/German)
GME STD 518913-2001 Thermoplastic elastomer 8913 PP+EPDM Termoelast 8913 PP+EPDM English/Swedish
GME STD 518949-2002 Thermoplastic elastomer 8949 EPDM+PP Termoelast 8949 EPDM+PP English/Swedish
GME STD 518892-2002 Thermoplastic elastomer 8892 PP+EPDM-M Termoelast 8892 PP+EPDM-M English/Swedish
GME TM 944700-1992 Verbundwerkstoff, Tr鋑er auf UP-Basis mit Glasfaserverst鋜kung, mit PP-Schaum verklebt Composite Material, Carrier Based on UP Reinforced with Glass Fibre, Bonded with PP-Foam German

中国轻工总会, pp pipe material

QB 1929-1993 Polypropylene (PP) pipes for water supply

Korean Agency for Technology and Standards (KATS), pp pipe material

KS M 3843-2010 Plastics-Recycled moulding materials-Polypropylene(PP)
KS M 3843-2010(2020) Plastics－Recycled moulding materials－Polypropylene(PP)
KS M 3362-2015 Polypropylene (PP) pipes for hot and cold water installations
KS M 3362-2012 Polypropylene (PP) pipes for hot and cold water installations
KS M 3362-1986 Polypropylene (PP) pipes for hot and cold water installations
KS M 3362-1990 Polypropylene (PP) pipes for hot and cold water installations
KS M 3362-2001 Polypropylene (PP) pipes for hot and cold water installations
KS M ISO 15013:2019 Plastics — Extruded sheets of polypropylene(PP) — Requirements and test methods
KS M ISO 17555-2012(2017) Plastics－Film and sheeting－ Biaxially oriented polypropylene(PP) films
KS M ISO 17555-2012(2022) Plastics－Film and sheeting－ Biaxially oriented polypropylene(PP) films
KS M 3391-2004 Plastics piping systems for non-pressure drainage and sewerage－Polypropylene(PP)
KS M ISO 15874-2:2012 Plastics piping systems for hot and cold water installations-Polypropylene (PP)-Part 2:Pipes
KS M ISO 15874-2:2020 Plastics piping systems for hot and cold water installations — Polypropylene(PP) — Part 2: Pipes
KS M 3391-2019 Plastics piping systems for non-pressure drainage and sewerage — Polypropylene(PP)
KS M ISO 15874-1:2016 Plastics piping systems for hot and cold water installations－Polypropylene (PP)－Part 1：General
KS M ISO 1873-2:2011 Plastics-Polypropylene(PP) moulding and extrusion materials-Part 2:Preparation of test specimens and determination of properties
KS M ISO 1873-2:2016 Plastics－Polypropylene(PP) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 1873-1-2006(2011) Plastics－Polypropylene(PP) moulding and extrusion materials－Part 1：Designation system and basis for specifications
KS M ISO 15874-3:2002 Plastics piping systems for hot and cold water installations－Polypropylene(PP)－Part 3：Fittings
KS M ISO 15874-1-2016(2021) Plastics piping systems for hot and cold water installations－Polypropylene (PP)－Part 1：General
KS M ISO 19069-1-2017(2022) Plastics ㅡ Polypropylene (PP) moulding and extrusion materials ㅡ Part 1: Designation system and basis for specifications
KS M ISO 19069-2-2017(2022) Plastics ㅡ Polypropylene (PP) moulding and extrusion materials ㅡ Part 2: Preparation of test specimens and determination of properties
KS M ISO 19069-1:2017 Plastics ㅡ Polypropylene (PP) moulding and extrusion materials ㅡ Part 1: Designation system and basis for specifications
KS B ISO 8495:2001 Metallic materials Tube Ring-expanding test
KS M ISO 1873-1:2006 Plastics-Polypropylene(PP) moulding and extrusion materials-Part 1:Designation system and basis for specifications
KS M ISO 1873-1:2016 Plastics－Polypropylene(PP) moulding and extrusion materials－Part 1：Designation system and basis for specifications
KS M ISO 19069-2:2017 Plastics ㅡ Polypropylene (PP) moulding and extrusion materials ㅡ Part 2: Preparation of test specimens and determination of properties
KS M 3700-1-2009 Structured-wall polypropylene(PP) pipes for non-pressure underground drainage and sewerage-Part 1:Double-wall pipe
KS M 3700-2-2009 Structured-wall polypropylene(PP) pipes for non-pressure underground drainage and sewerage-Part 2:Multi-wall pipe
KS M 3700-3-2009 Structured-wall polypropylene(PP) pipes for non-pressure underground drainage and sewerage-Part 3:Corrugate pipe
KS M ISO 15874-1:2012 Plastics piping systems for hot and cold water installations-Polypropylene (PP)-Part 1:General
KS M ISO 15874-3:2020 Plastics piping systems for hot and cold water installations — Polypropylene(PP) — Part 3: Fittings
KS M 3700-4-2009 Structured-wall polypropylene(PP) pipes for non-pressure underground drainage and sewerage-Part 4:Seamless pipe
KS B ISO 8493:2001 Metallic materials Tube Drift-expanding test
KS B ISO 8494:2001 Metallic materials Tube Flanging test
KS B ISO 8492:2001 Metallic materials Tube Flattening test
KS P 7451-2006 Dental root canal sealing materials
KS P 7451-2006(2011) Dental root canal sealing materials
KS M 3700-3-2016 Structured-wall polypropylene(PP) pipes for non-pressure underground drainage and sewerage－Part 3：Corrugate pipe
KS C IEC 60674-3-1:2014 Plastic films for electrical purposes — Part 3: Specifications for individual materials — Sheet 1: Biaxially oriented polypropylene(PP) films for capacitors
KS C IEC 60674-3-1:2019 Plastic films for electrical purposes ― Part 3: Specifications for individual materials ― Sheet 1: Biaxially oriented polypropylene(PP) films for capacitors
KS P 7451-2014 Dental root canal sealing materials
KS P ISO 6876:2020 Dentistry — Root canal sealing materials
KS P ISO 6876:2014 Dentistry — Root canal sealing materials
KS B ISO 8496:2001 Metallic materials Tube Ring tensile test
KS M ISO 21138-1:2008 Plastics piping systems for non-pressure underground drainage and sewerage－Structured-wall piping systems of unplasticized poly(vinyl chloride)(PVC-U), polypropylene(PP) and polyethylene(PE)－Part 1：Material specifications and performance criteria for pipe
KS M ISO 21138-1-2008(2018) Plastics piping systems for non-pressure underground drainage and sewerage－Structured-wall piping systems of unplasticized poly(vinyl chloride)(PVC-U), polypropylene(PP) and polyethylene(PE)－Part 1：Ma

AENOR, pp pipe material

UNE-CEN/TS 14541:2008 EX Plastics pipes and fittings for non-pressure applications - Utilisation of non-virgin PVC-U, PP and PE materials
UNE-EN ISO 19069-1:2015 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 19069-1:2015)
UNE-EN ISO 15874-2:2013 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes (ISO 15874-2:2013)
UNE-EN ISO 15874-1:2013 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General (ISO 15874-1:2013)
UNE-EN ISO 15874-3:2013 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings (ISO 15874-3:2013)
UNE-EN 60674-3-1:1999/A1:2012 Plastic films for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors

Professional Standard - Light Industry, pp pipe material

QB/T 1929-2006 Buried polypropylene pipes for water supply

AT-ON, pp pipe material

ONORM C 9550 Teil.1-1986 Plastic moulding materials; polypropylene (PP) moulding materials; Classification and designation
OENORM EN ISO 15874-1:2021 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General (ISO 15874-1:2013)

Professional Standard - Urban Construction, pp pipe material

CJ/T 278-2008 Polypropylene pipe and fitting for drainage inside buildings

国家市场监督管理总局、中国国家标准化管理委员会, pp pipe material

GB/T 40006.3-2021 Plastics—Recycled Plastics—Part 3：Polypropylene(PP) materials
GB/T 39937-2021 Plastics—Extruded sheets of polypropylene (PP)—Requirements and test methods
GB/T 35451.2-2018 Polypropylene(PP) structure-wall piping systems for underground drainage and sewerage—Part 2: Polypropylene spirally enwound structure-wall pipes

IT-UNI, pp pipe material

UNI 7055-1972
EC 1-2020 UNI EN ISO 8495:2020 Metallic materials - Tube - Ring-expanding test

KR-KS, pp pipe material

KS M ISO 17557-2017 Plastics - Film and sheeting - Cast polypropylene(PP) films
KS M ISO 15013-2019 Plastics — Extruded sheets of polypropylene(PP) — Requirements and test methods
KS M ISO 15874-2-2020 Plastics piping systems for hot and cold water installations — Polypropylene(PP) — Part 2: Pipes
KS M ISO 15874-1-2016 Plastics piping systems for hot and cold water installations－Polypropylene (PP)－Part 1：General
KS M ISO 1873-2-2011 Plastics－Polypropylene(PP) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 19069-2-2017 Plastics ㅡ Polypropylene (PP) moulding and extrusion materials ㅡ Part 2: Preparation of test specimens and determination of properties
KS M ISO 19069-1-2017 Plastics ㅡ Polypropylene (PP) moulding and extrusion materials ㅡ Part 1: Designation system and basis for specifications
KS M ISO 15874-3-2020 Plastics piping systems for hot and cold water installations — Polypropylene(PP) — Part 3: Fittings
KS C IEC 60674-3-1-2019 Plastic films for electrical purposes ― Part 3: Specifications for individual materials ― Sheet 1: Biaxially oriented polypropylene(PP) films for capacitors
KS P ISO 6876-2020 Dentistry — Root canal sealing materials

British Standards Institution (BSI), pp pipe material

DD CEN/TS 14541:2007 Plastics pipes and fittings for non-pressure applications — Utilisation of non-virgin PVC-U, PP and PE materials
BS EN ISO 15874-2:2013 Plastics piping systems for hot and cold water installations. Polypropylene (PP). Pipes
BS EN ISO 15013:2007 Plastics - Extruded sheets of polypropylene (PP) - Requirements and test methods
BS EN ISO 1873-2:2007 Plastics - Polypropylene (PP) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 15874-3:2013 Plastics piping systems for hot and cold water installations. Polypropylene (PP). Fittings
BS EN ISO 15874-2:2013+A2:2022 Plastics piping systems for hot and cold water installations. Polypropylene (PP) - Pipes
20/30408333 DC BS ISO 17555. Plastics. Film and sheeting. Biaxially oriented polypropylene (PP) films
BS DD CEN/TS 14541:2007 Plastics pipes and fittings for non-pressure applications. Utilisation of non-virgin PVC-U, PP and PE materials
21/30429604 DC BS EN ISO 15013. Plastics. Extruded sheets of polypropylene (PP). Requirements and test methods
BS EN ISO 15013:2022 Tracked Changes. Plastics. Extruded sheets of polypropylene (PP). Requirements and test methods
BS ISO 17555:2021 Tracked Changes. Plastics. Film and sheeting. Biaxially oriented polypropylene (PP) films
BS EN ISO 15874-1:2013 Plastics piping systems for hot and cold water installations. Polypropylene (PP). General
BS EN ISO 19069-1:2015 Tracked Changes. Plastics. Polypropylene (PP) moulding and extrusion materials. Designation system and basis for specifications
BS DD CEN ISO/TS 15874-7:2003 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Guidance for the assessment of conformity
BS EN ISO 15874-5:2013 Plastics piping systems for hot and cold water installations. Polypropylene (PP). Fitness for purpose of the system
BS EN ISO 15874-1:2013+A1:2022 Plastics piping systems for hot and cold water installations. Polypropylene (PP) - General
BS EN ISO 15874-3:2013+A2:2021 Plastics piping systems for hot and cold water installations. Polypropylene (PP) - Fittings
BS EN 1852-1:1998 Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Specifications for pipes, fittings and the system
BS EN ISO 19069-2:2016 Tracked Changes. Plastics. Polypropylene (PP) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN 60674-3-1:1998+A1:2011 Plastic films for electrical purposes. Specifications for individual materials. Sheet 1: Biaxially oriented polypropylene (PP) films for capacitors
DD CEN/TS 1852-3:2003 Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP). Guidance for installation
BS EN ISO 8493:2004 Metallic materials - Tube - Drift-expanding test (ISO 8493:1998)
BS EN ISO 8492:2013 Metallic materials. Tube. Flattening test
BS EN ISO 8494:2013 Metallic materials. Tube. Flanging test
BS DD CEN/TS 1852-3:2003 Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Guidance for installation
BS EN ISO 15874-5:2013+A1:2018 Plastics piping systems for hot and cold water installations. Polypropylene (PP) - Fitness for purpose of the system
21/30427324 DC BS EN ISO 15874-2 AMD2. Plastics piping systems for hot and cold water installations. Polypropylene (PP) - Part 2. Pipes
BS EN 13480-2:2017+A8:2021 Metallic industrial piping. Materials
BS EN 13480-2:2002+A2:2010 Metallic industrial piping. Materials
BS EN 13480-2:2012+A1:2013 Metallic industrial piping. Materials
BS EN ISO 8496:2004 Metallic materials - Tube - Ring tensile test
BS EN ISO 8496:2013 Metallic materials. Tube. Ring tensile test
BS EN ISO 8495:2013 Metallic materials. Tube. Ring-expanding test
BS PD CEN/TS 1852-2:2015 Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP). Guidance for the assessment of conformity
BS DD CEN/TS 1852-2:2009 Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Guidance for the assessment of conformity
23/30445210 DC BS EN ISO 19069-2. Plastics. Polypropylene (PP) moulding and extrusion materials - Part 2. Preparation of test specimens and determination of properties
BS EN IEC 60674-3-1:2021 Tracked Changes. Plastic films for electrical purposes. Specifications for individual materials. Sheet 1. Biaxially oriented polypropylene (PP) film for capacitors

CEN - European Committee for Standardization, pp pipe material

PD CEN/TS 14541:2007 Plastics pipes and fittings for non-pressure applications - Utilisation of non-virgin PVC-U@ PP and PE materials
EN ISO 1873-2:1997 Plastics - Polypropylene (PP) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties (Incorporates Amendment A1: 2000)
EN ISO 8494:2004 Metallic materials - Tube - Flanging test
EN ISO 8492:2004 Metallic materials - Tube - Flattening test
EN ISO 8495:2004 Metallic materials - Tube - Ring-expanding test
EN ISO 8496:2004 Metallic materials - Tube - Ring tensile test

Association of German Mechanical Engineers, pp pipe material

DVS 2207-4 Beiblatt-1991
DVS 2207-11-1999 "Welding of thermoplastics - Heated tool welding of pipes, pipeline, components and sheets out of PP"
DVS 2207-11-1985 Heated-tool welding of thermoplastics; pipelines of polypropylene (PP)
DVS 2205-1 Beiblatt 10-2005 Calculation of tanks and apparatus made of thermoplastics - Reduction coefficients A1 for moulding materials made of PP
DVS 2207-11-1997
DVS 2207-4 Beiblatt-1993 "Welding of thermoplastics - Extrusion welding - Panels and pipes, welding parameters for HDPE and PP"

German Institute for Standardization, pp pipe material

DIN EN 15345:2008 Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates; English version of DIN EN 15345:2008-02
DIN EN ISO 15013:2008 Plastics - Extruded sheets of polypropylene (PP) - Requirements and test methods (ISO 15013:2007); English version of DIN EN ISO 15013:2008-01
DIN EN ISO 15013:2022-06 Plastics - Extruded sheets of polypropylene (PP) - Requirements and test methods (ISO 15013:2022); German version EN ISO 15013:2022
DIN EN ISO 19069-1:2015-06 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 19069-1:2015); German version EN ISO 19069-1:2015
DIN EN ISO 1873-1:1995 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1873-1:1995); German version EN ISO 1873-1:1995
DIN EN ISO 15874-2/A1:2007 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes - Amendment 1 (ISO 15874-2:2003/Amd 1:2007); English version of DIN EN ISO 15874-2:2003/A1:2007-09
DIN EN ISO 15874-2:2022-11 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes (ISO 15874-2:2013 + Amd.1:2018 + Amd.2:2022); German and English version EN ISO 15874-2:2013 + A1:2018 + A2:2022
DIN EN ISO 1873-2:2007 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1873-2:2007); English version of DIN EN ISO 1873-2:2007-11
DIN 6103:2002 Means of packaging - Flexible cylindrical plastic tubes - Coex multilayer tube; Dimensions, materials
DIN EN ISO 19069-2:2020-01 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19069-2:2016); German version EN ISO 19069-2:2016 / Note: To be replaced by DIN EN ISO 19069-2 (2023-02).
DIN 3339:1984 Valves; body component materials
DIN EN ISO 15874-1:2022-10 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General (ISO 15874-1:2013 + Amd 1:2022); German and English version EN ISO 15874-1:2013 + A1:2022
DIN ISO/TS 15874-7:2004 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 7: Guidance for the assessment of conformity (ISO/TS 15874-7:2003); German version CEN ISO/TS 15874-7:2003
DIN 5060:1985 Means of packaging; closures for tube ends
DIN EN ISO 6876:2012-10 Dentistry - Root canal sealing materials (ISO 6876:2012); German version EN ISO 6876:2012
DIN 28178:2020-07 Swirlpipes - Dimensions and materials
DIN CEN/TS 14541:2013 Plastics pipes and fittings - Characteristics for utilisation of non-virgin PVC-U, PP and PE materials; German version CEN/TS 14541:2013
DIN EN ISO 15874-2:2018 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes (ISO 15874-2:2013 + Amd. 1:2018); German and English version EN ISO 15874-2:2013 + A1:2018

Lithuanian Standards Office , pp pipe material

LST EN ISO 15874-2:2013 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes (ISO 15874-2:2013)
LST EN ISO 1873-1:2002 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1873-1:1995)
LST EN ISO 1873-2:2007 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1873-2:2007)
LST EN ISO 15874-2:2004 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes (ISO 15874-2:2003)
LST EN ISO 15874-3:2004 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings (ISO 15874-3:2003)

Fujian Provincial Standard of the People's Republic of China, pp pipe material

DB35/T 1501-2015 Polypropylene (PP) wound structural wall pipes for buried drainage

ES-UNE, pp pipe material

UNE 53994:2020 Plastics. PVC-U, PE and PP pipes and fittings for drainage in building and civil engineering and agricultural drainage.
UNE-EN ISO 15013:2022 Plastics - Extruded sheets of polypropylene (PP) - Requirements and test methods (ISO 15013:2022)
UNE-EN ISO 19069-2:2016 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19069-2:2016)
UNE-EN ISO 15874-2:2013/A1:2018 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes - Amendment 1 (ISO 15874-2:2013/Amd 1:2018)
UNE-EN IEC 60674-3-1:2021 Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors (Endorsed by Asociación Española de Normalización in November of 2021.)

Indonesia Standards, pp pipe material

SNI ISO 17555:2011 Plastics - Film and sheeting - Biaxially oriented polypropylene (PP) films

International Organization for Standardization (ISO), pp pipe material

ISO 15013:2022 Plastics — Extruded sheets of polypropylene (PP) — Requirements and test methods
ISO 8283-3:1992 Plastics pipes and fittings; dimensions of sockets and spigots for discharge systems inside buildings; part 3: polypropylene (PP)
ISO 15874-2:2003 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes
ISO 15874-2:2013 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes
ISO 3213:1996 Polypropylene (PP) pipes - Effect of time and temperature on expected strength
ISO 8773:2006 Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP)
ISO 19069-2:2016 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 1873-2:2007 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 1873-2:1997 Plastics — Polypropylene (PP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
ISO 1873-1:1995 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 19069-1:2015 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 15874-2:2013/Amd 1:2018 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes; Amendment 1
ISO 15874-2:2003/Amd 1:2007 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes; Amendment 1
ISO 15874-1:2003 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General
ISO 15874-3:2003 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings
ISO 15874-1:2013 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General
ISO 15874-3:2013 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings
ISO 8495:1986 Metallic materials; Tube; Ring expanding test
ISO 1873-2:1997/Amd 1:2000 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties; Amendment 1
ISO/DIS 19069-2:1980 Plastics — Polypropylene (PP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
ISO 8494:2013 Metallic materials.Tube.Flanging test
ISO 8492:2013 Metallic materials.Tube.Flattening test
ISO 8494:1998 Metallic materials - Tube - Flanging test
ISO 8492:1986 Metallic materials; Tube; Flattening test
ISO 8493:1986 Metallic materials; Tube; Drift expanding test
ISO 15874-2:2013/Amd 2:2022 Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 2: Pipes — Amendment 2: Impact test
ISO 7671:2003 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polypropylene (PP)
ISO 8494:1986 Metallic materials; Tube; Flanging test
ISO 11414:1996 Plastics pipes and fittings - Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion
ISO/TS 15874-7:2003 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 7: Guidance for the assessment of conformity
ISO 15874-5:2013 Plastics piping systems for hot and cold water installations.Polypropylene (PP).Part 5: Fitness for purpose of the system
ISO 15874-1:2003/Amd 1:2007 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General; Amendment 1
ISO 15874-5:2003 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5: Fitness for purpose of the system
ISO 15874-3:2013/Amd 2:2021 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings; Amendment 2
ISO 15874-3:2013/Amd 1:2018 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings; Amendment 1
ISO 3126:1974 Plastics pipes; Measurement of dimensions
ISO 8495:2013 Metallic materials.Tube.Ring-expanding test
ISO 8495:1998 Metallic materials - Tube - Ring-expanding test
ISO 8496:1998 Metallic materials - Tube - Ring tensile test
ISO 8496:1986 Metallic materials; Tube; Ring tensile test
ISO 21138-1:2007 Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Material specifications and performance criteria
ISO 21138-1:2020 Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Pa

Standard Association of Australia （SAA）, pp pipe material

RUL PL.34-2002 Rulings to plumbing and piping systems Standards - Polypropylene piping type (PP-R) (Ruling to AS/NZS 3500.1.2-1998)

ZA-SANS, pp pipe material

SANS 15874-2:2004 Plastics piping systems for hot and cold water installations - Polypropylene (PP) Part 2: Pipes
SANS 8773:2007 Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP)
SANS 161-1:1995 Plastics - Polypropylene (PP) moulding and extrusion materials Part 1: Designation system and basis for specifications
SANS 161-2:1997 Plastics - Polypropylene (PP) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
SANS 15874-1:2004 Plastics piping systems for hot and cold water installations - Polypropylene (PP) Part 1: General
SANS 15874-3:2004 Plastics piping systems for hot and cold water installations - Polypropylene (PP) Part 3: Fittings
SANS 8491:2003 Metallic materials - Tube (in full section) - Bend test
SANS 1130:2006 Fibre reinforcing material for pipe wrapping
SANS 1130:2009 Fibre reinforcing material for pipe wrapping
SANS 1117:2007 Plastics wrappings for the protection of steel pipelines
SANS 15874-5:2004 Plastics piping systems for hot and cold water installations - Polypropylene (PP) Part 5: Fitness for purpose of the system
SANS 21138-1:2008 Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Part 1: Material specifications and performance criteria fo

Shanghai Provincial Standard of the People's Republic of China, pp pipe material

DB31/ 724-2013 Energy consumption quota per unit product of polypropylene (PP-R) pipes for hot and cold water
DB31/ 724-2019 Energy consumption quota per unit product of polypropylene (PP-R) pipes for hot and cold water

Professional Standard - Petrochemical Industry, pp pipe material

SH/T 1750-2005 Propylene random copolymer (PP-R) materials for piping systems for hot and cold water installations

United States Navy, pp pipe material

NAVY QPL-15280-2013 Plastic, Material, Unicellular(Sheets and Tubes)
NAVY MIL-P-85499-1981 PRIMER MATERIAL

未注明发布机构, pp pipe material

BS EN ISO 1873-1:1995(2000) Plastics — Polypropylene (PP) mouldingandextrusion materials — Part 1 : Designation systemand basis for specifications
BS 2782-11-Method 1150B:1998(1999) Methods of testing plastics — Part 11 : Thermoplastics pipes, fittings and valves — Method 1150B : Plastics pipes and fittings — Preparation of polyethylene (PE) pipe / pipe or pipe / fitting test piece assemblies by butt fusion
BS EN ISO 15874-3:2013+A1:2018 Plastics piping systems for hot and cold water installations – Polypropylene (PP) Part 3 : Fittings
DIN EN ISO 6876:2003 Dental root canal filling materials

NL-NEN, pp pipe material

NEN-EN 10236-1994 Metallic materials. Tube. Ring expanding test

(U.S.) Ford Automotive Standards, pp pipe material

FORD WSD-M4D651-A-2011 POLYPROPYLENE (PP), 10% MINERAL FILLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M4D841-A2-2003 POLYPROPYLENE (PP) COPOLYMER, 16 % MINERAL FILLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M4D651-A2-2009 POLYPROPYLENE (PP) COPOLYMER, 10 % MINERAL FILLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D638-B-2011 POLYPROPYLENE (PP) MOLDING COMPOUND, MOLDED-IN-COLOR, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M4D865-A-2010 POLYPROPYLENE (PP), 40% LONG GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M4D841-A2-2011 POLYPROPYLENE (PP) COPOLYMER, 16% MINERAL FILLED, MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D841-A6-2011 POLYPROPYLENE (PP) COPOLYMER, 13 % TALC REINFORCED BLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D729-B7-2011 POLYPROPYLENE (PP) HOMOPOLYMER, 20% MINERAL FILLED, BLOW MOLDING COMPOUND, UNDERBODY AND ENGINE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D731-B1-2011 POLYPROPYLENE (PP) HOMOPOLYMER, 20% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D741-B1-2011 POLYPROPYLENE (PP) HOMOPOLYMER COOLING AGENT RESISTANT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M99D43-A-2006 POLYPROPYLENE, 50% WOOD FIBER FILLED - EXTRUDED COMPOSITE***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D556-A8-2011 POLYPROPYLENE (PP) COPOLYMER, 22% MINERAL FILLED MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D936-A1-2012 POLYPROPYLENE (PP) COPOLYMER, 30 % GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M4D865-A2-2010 POLYPROPYLENE (PP) HOMOPOLYMER, 50% LONG GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***

Japanese Industrial Standards Committee (JISC), pp pipe material

JIS K 6921-1:1997 Plastics -- Polypropylene (PP) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
JIS K 6921-2:1997 Plastics -- Polypropylene (PP) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 6921-1:2018 Plastics -- Polypropylene (PP) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
JIS K 6921-2:1996 Plastics -- Polypropylene (PP) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 6922-2:1996 Plastics -- Polyethylene (PP) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 6921-2:2005 Plastics -- Polypropylene (PP) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 6921-2:2010 Plastics -- Polypropylene (PP) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS T 6522:2005 Dental root canal sealing materials
JIS T 6522:2015 Dental root canal sealing materials

CZ-CSN, pp pipe material

BE-NBN, pp pipe material

NBN-EN 10234-1994 Metallic materials. Tube. Drift expanding test

DE-DVS, pp pipe material

DVS 2207-11-2008 Welding of thermoplastics - Heated tool welding of pipes, piping parts and panels made of PP

Military Standards (MIL-STD), pp pipe material

DOD A-A-51295-1985 TUBING, STERILIZATION

SE-SIS, pp pipe material

SIS SEN 0715
SIS SS 11 26 42-1986 Metallic materials - Tubes - Flanging test
SIS SS 3604-1988 Plastics pipes — Pipes and fittings of PP for buried sewers and discharge systems inside buildings — Dimensions and general technical specifications

US-FCR, pp pipe material

FCR DOE 5660.1B-1994 MANAGEMENT OF NUCLEAR MATERIALS
FCR AF R AFLC 19-3 IMC 92-1-1992 ASBESTOS MATERIAL MANAGEMENT
FCR AF R AFLC 19-3-1990 ASBESTOS MATERIAL MANAGEMENT
FCR COE EL-93-20 FINAL REPORT-1993 MANAGEMENT PLAN FOR THE DISPOSAL OF CONTAMINATED MATERIAL IN THE CRANEY ISLAND DREDGED MATERIAL MANAGEMENT AREA

Liaoning Provincial Standard of the People's Republic of China, pp pipe material

DB21/T 2170.2-2013 Heating Plastic Pipe Engineering Technical Regulations Part 2: Random Copolymerized Polypropylene (PP-R) Plastic-aluminum Stable Composite Pipe, Nanocomposite Type 4 Polypropylene (NFβPP-R) Pipe, Random Copolymerized Polypropylene (PP -R) pipe piping, pol

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, pp pipe material

GB/T 35451.1-2017 Polypropylene(PP) structure-wall piping systems for underground drainage and sewerage—Part 1：Polypropylene double wall corrugated pipes

VN-TCVN, pp pipe material

TCVN 5890-2008 Metallic materials.Tube.Drift-expanding test
TCVN 314-2008 Metallic materials.Tube.Tensile test
TCVN 1829-2008 Metallic materials.Tube.Flanging test
TCVN 1830-2008 Metallic materials.Tube.Flattening test
TCVN 1832-2008 Metallic materials.Tube.Hydrolic pressure test
TCVN 5892-2008 Metallic materials.Tube.Ring-expanding test

SAE - SAE International, pp pipe material

SAE AMS-P-21922A-2016 Plastic Rods and Tubes@ Polyethylene

Defense Logistics Agency, pp pipe material

DLA A-A-59228 VALID NOTICE 1-2003 TONGS, MATERIAL LIFTING, PIPE
DLA A-A-59228-1998 TONGS, MATERIAL LIFTING, PIPE
DLA MIL-P-16685 D (2)-1995 PACKING, MATERIAL AND PACKING PREFORMED (STUFFING TUBE FOR ELECTRIC CABLE)
DLA MIL-P-16685 D-1970 PACKING, MATERIAL AND PACKING PREFORMED (STUFFING TUBE FOR ELECTRIC CABLE)
DLA MIL-DTL-16685 E-2009 PACKING, MATERIAL AND PACKING PREFORMED (STUFFING TUBE FOR ELECTRIC CABLES)

RO-ASRO, pp pipe material

STAS 3876-1985 PAVER FOR TEXTILE TUBES

TR-TSE, pp pipe material

TS 418-1966 PE PLASTIC P?PES

National Aeronautics and Space Administration (NASA), pp pipe material

NASA NPD 7100.10 REV D-2003 CURATION OF EXTRATERRESTRIAL MATERIALS

Professional Standard - Environmental Protection, pp pipe material

HJBZ 39-1999 plastic pipes for construction

IX-SA, pp pipe material

AS 203:1972

Professional Standard - Chemical Industry, pp pipe material

HG/T 4372-2012 Composite pipes and fittings for chemical industry

Professional Standard - Building Materials, pp pipe material

JC/T 563-1994 Red mud weather-resistant plastic pipes and fittings

American National Standards Institute （ANSI), pp pipe material

ANSI/NSF 14(i24)-2008 Plastics piping system components and related materials
ANSI/NSF 14(i7)-2004 Plastics Piping System Components and Related Materials
ANSI/NSF 14(i21)-2008 Plastics piping system components and related materials
ANSI/NSF 14(i17)-2007 Plastic piping system components and related materials
ANSI/NSF 14(i29)-2009 Plastics piping system components and related materials

(U.S.) Plastic Pipe Association, pp pipe material

PPI TR-19-2020 CHEMICAL RESISTANCE OF PLASTIC PIPING MATERIALS

HU-MSZT, pp pipe material

MSZ 7026-1984

GM North America, pp pipe material

GM GM2773M-1997 Flexible Air Duct Material

Institute of Interconnecting and Packaging Electronic Circuits (IPC), pp pipe material

IPC 1752-2007 Materials Declaration Management Version 1.1

PL-PKN, pp pipe material

PN E29071-1973 Insulating materials Epoxy rolled tubes

Professional Standard - Military and Civilian Products, pp pipe material

WJ/Z 301-1992 Barrel Design Material Selection

Professional Standard - Medicine, pp pipe material

YY 0717-2009 Dental root canal sealing materials

International Electrotechnical Commission (IEC), pp pipe material

IEC 60674-3-1:1998 Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors
IEC 60674-3-1:1998+AMD1:2011 CSV Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) films for capacitors
IEC 60674-3-1:2021 RLV Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors
IEC 60674-3-1:2021 Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors

FI-SFS, pp pipe material

SFS 5162 E-1986 In case of interpretation disputes the Finnish version applies. Date of translation 1986-08-18