ZH
RU
ES

three point bending span

three point bending span, Total:164 items.

In the international standard classification, three point bending span involves: Ceramics, Materials for aerospace construction, Paper and board, Glass, Rubber and plastics products, Inorganic chemicals, Plastics, Farming and forestry, Reinforced plastics, Products of the textile industry, Solar energy engineering, Adhesives, Road vehicle systems, Refractories, Construction materials, Insulating materials, Paints and varnishes, Medical equipment, Wood-based panels, Waxes, bituminous materials and other petroleum products, Valves, Pipeline components and pipelines, Products of the chemical industry, Earthworks. Excavations. Foundation construction. Underground works, Raw materials for rubber and plastics, Paper products.

British Standards Institution (BSI), three point bending span

BS EN 658-5:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of interlaminar shear strength by short span bend test (three points)
BS EN 658-5:2002 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of interlaminar shear strength by short span bend test (three points)
BS EN 2746:1998 Glass fibre reinforced plastics - Flexural test - Three point bend method
BS ISO 5628:2012 Paper and board. Determination of bending stiffness. General principles for two-point, three-point and four-point methods
BS ISO 11093-6:2005 Paper and board. Testing of cores - Determination of bending strength by the three-point method
BS ISO 11093-7:2011 Paper and board. Testing of cores. Determination of flexural modulus by the three-point method
BS EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Test with specimen supported at two points (four point bending)
BS ISO 5628:2019 Tracked Changes. Paper and board. Determination of bending stiffness. General principles for two-point, three-point and four-point methods
BS EN ISO 899-2:2003+A1:2015 Plastics. Determination of creep behaviour. Flexural creep by three-point loading
BS ISO 23242:2020 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending
19/30375027 DC BS ISO 23242. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending
BS 7034-7:1988 Viscosity and viscometric fixed points of glass. Method for the determination of annealing point and strain point by beam bending
DD ENV 1966-1996 Structural adhesives. Characterization of a surface by measuring adhesion by means of the three point bending method
BS 2782-10 Method 1005:1977 Methods of testing plastics. Glass reinforced plastics. Determination of flexural properties. Three point method
BS PD CEN/TS 15963:2014 Bitumen and bituminous binders. Determination of the fracture toughness temperature by a three point bending test on a notched specimen
BS DD CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
BS 7034-4:1988 Viscosity and viscometric fixed points of glass. Method for the determination of viscosity by beam bending
BS 7034-4:1989 Viscosity and viscometric fixed points of glass. Method for the determination of viscosity by beam bending
BS ISO 11093-6:2007 Paper and board - Testing of cores - Determination of bending strength by the three-point method

Danish Standards Foundation, three point bending span

DS/EN 658-5:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points)
DS/EN 2746:1999 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
DS/EN 1288-3:2001 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
DS/ENV 658-5:1993 Advanced technical ceramic. Mechanical properties of ceramic composites at room temperature. Part 5: Determination of shear strength by short span bend test (three-point)
DS/CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
DS/EN 1966:2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method
DS/EN ISO 899-2:2003 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading

Lithuanian Standards Office , three point bending span

LST EN 658-5-2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points)
LST EN 2746-2001 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
LST EN 1288-3-2002 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
LST EN 1966-2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method
LST EN ISO 899-2:2003 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO 899-2:2003)

FI-SFS, three point bending span

SFS-ISO 6602 E:1986 This standard is approved in English

German Institute for Standardization, three point bending span

DIN EN 2746:1998-10 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998
DIN 51902:1997 Testing of carbon materials - Determination of flexural strength by three point method - Solid matters
DIN 51902:2020 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN ISO 11093-6:2005-09 Paper and board - Testing of cores - Part 6: Determination of bending strength by the three-point method (ISO 11093-6:2005)
DIN 51902:2020-12 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending); German version EN 1288-3:2000
DIN EN 658-5:2003-03 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three-points); German version EN 658-5:2002
DIN EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998
DIN EN 1288-3:2000-09 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending); German version EN 1288-3:2000 / Note: To be replaced by DIN EN ISO 1288-3 (2007-10).
DIN EN ISO 899-2:2003 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO 899-2:2003); German version EN ISO 899-2:2003
DIN EN 12100:1997 Plastics piping systems - Polyethylene (PE) valves - Test method for the resistance to bending between supports; German version EN 12100:1997
DIN EN ISO 899-2:2015-06 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO 899-2:2003 + Amd.1:2015); German version EN ISO 899-2:2003 + A1:2015 / Note: To be replaced by DIN EN ISO 899-2 (2023-03) (in preparation).
DIN EN 1966:2009-07 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method; German version EN 1966:2009
DIN ISO 7884-7:1998 Glass - Viscosity and viscometric fixed points - Part 7: Determination of annealing point and strain point by beam bending (ISO 7884-7:1987)
DIN ISO 11093-7:2012-10 Paper and board - Testing of cores - Part 7: Determination of flexural modulus by the three-point method (ISO 11093-7:2011)
DIN ISO 7884-4:1998 Glass - Viscosity and viscometric fixed points - Part 4: Determination of viscosity by beam bending (ISO 7884-4:1987)
DIN ISO 7884-7:1998-02 Glass - Viscosity and viscometric fixed points - Part 7: Determination of annealing point and strain point by beam bending (ISO 7884-7:1987)
DIN 51944:1999 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN 51944:2020 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN 51944:2020-12 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, three point bending span

GB/T 34171-2017 Test method for flexural property of thin and ultrathin glass—Three-point bending method
GB/T 33099-2016 Test methods of stiffness for dipped reinforcing material—Three-point bending

American Society for Testing and Materials (ASTM), three point bending span

ASTM D5023-01 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM E2092-00 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-04 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-03 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-18 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-18a Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D8058-19 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D8058-23 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D5023-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM E2092-13 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-09 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM C78/C78M-10e1 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM E2092-23 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM C78/C78M-22 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-15 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM D7250/D7250M-20 Standard Practice for Determining Sandwich Beam Flexural and Shear Stiffness
ASTM D7972-14(2020) Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Three-Point Loading at Room Temperature
ASTM F2606-08 Standard Guide for Three-Point Bending of Balloon Expandable Vascular Stents and Stent Systems
ASTM F2606-08(2014) Standard Guide for Three-Point Bending of Balloon Expandable Vascular Stents and Stent Systems
ASTM F2606-08(2021) Standard Guide for Three-Point Bending of Balloon-Expandable Vascular Stents and Stent Systems
ASTM E2769-18 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM C78/C78M-10 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM E2769-11 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM D5023-99 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)

AENOR, three point bending span

UNE-EN 2746:1999 AEROSPACE SERIES. GLASS FIBRE REINFORCED PLASTICS. FLEXURAL TEST. THREE POINT BEND METHOD.
UNE-EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
UNE-EN 1966:2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method
UNE-EN ISO 899-2:2003 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO 899-2:2003)

International Organization for Standardization (ISO), three point bending span

ISO 5628:2019 Paper and board — Determination of bending stiffness — General principles for two-point, three-point and four-point methods
ISO 5628:2012 Paper and board - Determination of bending stiffness - General principles for two-point, three-point and four-point methods
ISO 6602:1985 Plastics; Determination of flexural creep by three-point loading
ISO 23242:2020 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending
ISO/DIS 899-2:1968 Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading
ISO 1288-3:2016 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
ISO 899-2:2003/Amd 1:2015 Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading — Amendment 1

国家市场监督管理总局、中国国家标准化管理委员会, three point bending span

GB/T 39826-2021 Fine ceramics—Determining flexural bond strength—Four-point bending method
GB/T 38978-2020 Refractory products—Determination of stress-strain (three-point bending method）

American National Standards Institute （ANSI), three point bending span

ANSI/ASAE S459-1993 Shear and Three-Point Bending Test of Animal Bones
ANSI/ASTM D5023:2001 Test Method for Measuring the Dynamic Mechanical Properties of Plastics Using Three Point Bending (08.03)
ANSI/ASTM D5934:1997 Test Method for Determination of the Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three Point Bending

RU-GOST R, three point bending span

GOST 34368.2-2017 Plastics. Method of determination of flexural creep by three-point loading
GOST 32281.3-2013 Glass and glass products. Determination of the bending strength. Test with specimen supported at two points (four points bending)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, three point bending span

GB/T 22906.6-2008 Testing of cores.Part 6：Determination of bending strength by three-point method
GB/T 11546.2-2022 Plastics—Determination of creep behaviour—Part 2:Flexural creep by three-point loading

Association Francaise de Normalisation, three point bending span

NF T51-120-3:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - - Partie 3 : essai en flexion trois points sur éprouvettes non encastrées.
NF Q03-127:2012 Paper and board - Determination of bending stiffness - General principles for two-point, three-point and four-point methods.
NF P78-343*NF EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3 : test with specimen supported at two points (four points bending).
NF B43-205*NF EN 658-5:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5 : determination of interlaminar shear strength by short span bend test (three points).
NF T30-010:1992 Paints and varnishes. Evaluation of adhesion or cohesion. Three point bending method.
XP CEN/TS 15963:2014 Bitumes et liants bitumineux - Détermination de la température de résistance à la fissuration par un essai de flexion 3 points sur un barreau entaillé
NF EN ISO 899-2:2003 Plastiques - Détermination du comportement au fluage - Partie 2 : fluage en flexion par mise en charge en trois points
XP T66-078*XP CEN/TS 15963:2014 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
NF EN 1966:2009 Adhésifs structuraux - Caractérisation d'une surface par mesure de l'adhérence au moyen de la méthode de la flexion en trois points
NF T76-143*NF EN 1966:2009 Structural adhesives - Characterisation of a surface by measuring adhesion by means of the three point bending method.
NF T51-103-2/A1*NF EN ISO 899-2/A1:2015 Plastics - Determination of creep behaviour - Part 2 : flexural creep by three-point loading - Amendment 1

European Committee for Standardization (CEN), three point bending span

EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
DD ENV 658-5-1993 Advanced technical ceramics; mechanical properties of ceramic composites at room temperature; part 5: determination of shear strength by short span bend test (three-point)
EN 63:1977 Glass Reinforced Plastics: Determination of Flexural Properties; Three Point Method
EN 1288-3:2000 Glass in Building - Determination of the Bending Strength of Glass - Part 3: Test with Specimen Supported at Two Points (Four Point Bending)
EN 1966:2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method
EN ISO 899-2:1996 Plastics - Determination of Creep Behaviour - Part 2: Flexural Creep by Three-Point Loading ISO 899-2: 1993
EN 12100:1997 Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports
PD CEN/TS 15963:2014 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
EN ISO 899-2:2003 Plastics - Determination of Creep Behaviour - Part 2: Flexural Creep by Three-Point Loading ISO 899-2: 2003
prEN ISO 899-2 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO/DIS 899-2:2023)

Group Standards of the People's Republic of China, three point bending span

T/CSTM 00587-2023 Test method for flexural strength of crystalline silicon cells—Four-point flexural

KR-KS, three point bending span

KS M ISO 11093-6-2016 Paper and board - Testing of cores - Part 6 : Determination of bending strength by the three-point method
KS M ISO 11093-6-2022 Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method
KS M ISO 899-2-2016 Plastics－Determination of creep behavior－Part 2：Flexural creep by three-point loading
KS M ISO 11093-7-2020 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method

AT-ON, three point bending span

ONORM EN 63-1979 Glass reinforced plastics. Determination of flexural properties. Three point method.
ONORM ENV 658-5-1993 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of shear strength by short span bend test (three-point)

Korean Agency for Technology and Standards (KATS), three point bending span

KS M ISO 14679-2007(2017) Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 14679-2007(2022) Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 11093-6:2022 Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method
KS M ISO 11093-6:2016 Paper and board - Testing of cores - Part 6 : Determination of bending strength by the three-point method
KS M ISO 14679:2007 Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 899-2-2016(2021) Plastics－Determination of creep behavior－Part 2：Flexural creep by three-point loading
KS L ISO 7884-7:2014 Glass — Viscosity and viscometric fixed points — Part 7: Determination of annealing point and strain point by beam bending
KS L ISO 7884-7-2014(2019) Glass — Viscosity and viscometric fixed points — Part 7: Determination of annealing point and strain point by beam bending
KS M ISO 11093-7:2020 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method
KS M ISO 11093-7:2014 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method
KS L ISO 7884-4-2003(2018) Glass－Viscosity and viscometric fixed points－Part 4：Determination of viscosity by beam bending
KS M ISO 12986-1-2004(2009) Carbonaceous materials used in the production of aluminium－Prebaked anodes and cathode blocks－Part 1：Determination of bending/shear strength by a three-point method
KS F 2325-2002 Testing method for flexural strength of soil－cement using simple beam with third point loading
KS F 2325-1982 Testing method for flexural strength of soil－cement using simple beam with third point loading
KS L ISO 7884-4:2003 Glass－Viscosity and viscometric fixed points－Part 4：Determination of viscosity by beam bending

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, three point bending span

PREN 2746-1990 Aerospace Series Glass Fibre Reinforced Plastics Determination of Flexural Properties Three Point Bend Method (Issue P 1)
PREN 6061-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Sandwich Flexural Strength 4 Point Bending (Edition P1)

Society of Automotive Engineers (SAE), three point bending span

SAE J949-2009 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three Point Bending Test
SAE J949-2022 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three-Point Bending Test

American Gear Manufacturers Association, three point bending span

AGMA 932-A05-2005 Rating the Pitting Resistance and Bending Strength of Hypoid Gears

AGMA - American Gear Manufacturers Association, three point bending span

932-A05-2005 Rating the Pitting Resistance and Bending Strength of Hypoid Gears

European Association of Aerospace Industries, three point bending span

AECMA PREN 2746-1990 Aerospace Series Glass Fibre Reinforced Plastics Determination of Flexural Properties Three Point Bend Method Issue P 1
AECMA PREN 6061-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Sandwich Flexural Strength 4 Point Bending Edition P1

ES-UNE, three point bending span

UNE-EN 658-5:2002 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points) (Endorsed by AENOR in February of 2003.)

The American Road & Transportation Builders Association, three point bending span

AASHTO T 97-2014 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)

AASHTO - American Association of State Highway and Transportation Officials, three point bending span

T 97-2017 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)
T 97-2014 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)

CZ-CSN, three point bending span

CSN ISO 7884-4:1994 Glass - Viscosity and viscometric fixed points - Part 4: Determination of viscosity by beam bending

Professional Standard - Medicine, three point bending span

YY/T 0858-2011 Standard guide for three-piont bending of balloon expandable vascular stents and stent systems

Malaysia Standards, three point bending span

MS 1473-1999 Method of test for measuring the dynamic mechanical properties of plastics using three point bending

Japanese Industrial Standards Committee (JISC), three point bending span

JIS R 3111-3:2022 Glass in building -- Determination of the bending strength of glass -- Part 3: Test with specimen supported at two points (four-point bending)

CEN - European Committee for Standardization, three point bending span

DD ENV 1966-1995 Structural Adhesives - Characterization of a Surface by a Measuring Adhesion by Means of the Three Point Bending Method

未注明发布机构, three point bending span

DIN EN 1966:2003 Structural adhesives — Characterization of a surface by measuring adhesion by means of the three point bending method
BS PD CEN TS 15963:2014 Bitumen and bituminous binders — Determination of the fracture toughness temperature by a three point bending test on a notched specimen

TR-TSE, three point bending span

TS 3284-1979 Flexnral Strength Of Concrete (Using Simple Beam With Third-Point Loading)

Taiwan Provincial Standard of the People's Republic of China, three point bending span

CNS 1233-1984 Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third-point Loading)

TH-TISI, three point bending span

TIS 2246.2-2005 Plastics.determination of creep behaviour.part 2: flexural creep by three.point loading