ZH
RU
ES

High and low temperature test plastic

High and low temperature test plastic, Total:499 items.

In the international standard classification, High and low temperature test plastic involves: Reinforced plastics, Plastics, Pipeline components and pipelines, Fibre optic communications, Products of the textile industry, Rubber and plastics products, Testing of metals, Equipment for the chemical industry, Analytical chemistry, Electricity. Magnetism. Electrical and magnetic measurements, Welding, brazing and soldering, Rubber, Environmental testing, TESTING, Photography, Mechanical testing, Internal combustion engines for road vehicles, Thermodynamics and temperature measurements, Protection against fire, Energy and heat transfer engineering in general, Electrical wires and cables, Installations in buildings, Road vehicles in general, Wind turbine systems and other alternative sources of energy, Road engineering, Electrical and electronic testing, Railway rolling stock, Materials and articles in contact with foodstuffs, Road vehicle systems, Rails and railway components, Electrical accessories, Railway engineering in general, Test conditions and procedures in general, Farming and forestry, Optical equipment, Optics and optical measurements, Iron and steel products, Paints and varnishes, Metalliferous minerals, Lamps and related equipment, Refractories, Paint ingredients, Nuclear energy engineering, Ceramics, Fuels, Products of non-ferrous metals, Cellular materials, On-board equipment and instruments, Aerospace electric equipment and systems, Corrosion of metals, Insulating materials, Burners. Boilers, Bridge construction.

(U.S.) Ford Automotive Standards, High and low temperature test plastic

FORD FLTM BO 151-2-2001 LOW TEMPERATURE IMPACT TEST FOR PLASTICS
FORD FLTM BO 151-02-2001 LOW TEMPERATURE IMPACT TEST FOR PLASTICS
FORD FLTM BB 101-11-2000 PHYSICAL, ELECTRICAL, HEAT AND COLD TESTING OF AUTOMOTIVE CABLE (Replaces FLTM BB 001-11)
FORD WSS-M4D638-D2-2013 POLYPROPYLENE (PP) COPOLYMER MOLDING COMPOUND, MOLD-IN-COLOR, LOW GLOSS, UV STABILIZED, HIGH IMPACT AT COLD TEMPERATURE, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, High and low temperature test plastic

GB/T 9979-1988 Guide rule of test for mechanical properties of fiber-reinforced plastics at elevated and reducde temperatures
GB/T 9979-2005 Guide rule of test for mechanical properties of fiber-reinforced plastics at elevated and reduced temperatures
GB/T 5564-1994 Rubber and plastics hoses--Subambient temperature flexibility tests
GB/T 5564-2006 Rubber and plastics hoses Subambient temperature flexibility tests
GB/T 18426-2001 Rubber--or plastics-coated fabrics--Low-temperature bend test
GB/T 12584-2001 Rubber or plastics coated fabrics--Low-temperature impact test
GB/T 12584-2008 Rubber-or plastics-coated fabrics.Low-temperature impact test
GB/T 23711.2-2009 Low temperature test method for pressure vessels lined with fluoroplastics
GB/T 10590-2006 Specifications for high and low temperature/low air pressure testing chambers
GB/T 10590-2006(英文版) Specifications for high and low temperature/low air pressure testing chambers
GB/T 10592-2008 Specifications for low/high temperature test chambers
GB/T 10592-1989 Specification for low/high temperature test chambers
GB/T 10592-2023 High and low temperature test chamber technical conditions
GB/T 10591-2006(英文版) Specifications for high temperature/low air pressure testing chambers
GB/T 23711.3-2009 High temperature test method for pressure vessels lined with fluoroplastics
GB/T 2424.1-2005 Environmental testing for electric and electronic products Guidance for high temperature and low temperature tests
GB/T 10591-2006 Specifications for high temperature/low air pressure testing chambers
GB/T 10591-1989 Specification for high temperature/low air pressure test chambers
GB/T 2424.24-1995 Basic environmental testing procedures for electric and electronic products. Guidance for combined temperature (cold and heat)/low air pressure/vibration(sinusoidal)test
GB/T 2423.102-2008 Environmental testing for electric and electronic products.Part 2:Test method.Test:combined temperature(cold and heat)/low air pressure/vibration(sinusoidal)
GB/T 9868-1988 Rubber--General directions for achieving elevated or subnormal temperatures for test purposes
GB/T 2424.1-1989 Basic environmental testing procedures for electric and electronic products--Guidance for high temperature and low temperature tests
GB/T 2424.1-2015 Environmental testing.Part 3:Supporting documentation and guidance.Cold and dry heat tests
GB/T 5170.10-2017 Inspection methods for environmental testing equipments.Part 10:Combined high and low temperature/low air pressure testing equipments
GB/T 2423.59-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Test Z/ABMFh:Combined temperature(cold and heat)/low air pressure/vibration(random)
GB/T 4338-1995 Metallic materials--Tensile testing at elevated temperature
GB/T 13239-2006 Metallic materials.Tensile testing at low temperature
GB/T 2406.3-2022 Plastics—Determination of burning behaviour by oxygen index—Part 3: Elevated-temperature test
GB/T 12085.23-2022 Optics and photonics—Environmental test methods—Part 23：Low pressure combined with cold,ambient temperature and dry or damp heat
GB/T 5170.10-2008 Inspection methods for environmental testing equipments for electric and electronic products.Combined high and low temperature/low air pressure testing equipments
GB/T 12085.2-1989 Optics and optical instruments--Environmental test methods--Cold, heat, humidity
GB/T 14999.2-1994 Methods of acid etch test for transvese macro-structures of heat-resisting superalloys
GB/T 5470-1985 Test method for brittleness temperature of plastics by impact
GB/T 24204-2009 Iron ores for blast furnace feedstocks.Determination of low-temperature reduction-disintegration indices by dynamic method
GB/T 4338-2006 Metallic materials.Tensile testing at elevated temperature
GB/T 14999.1-1994 Methods of acid etch test for longitudinal macro-structures of heat-resisting superalloy bars
GB/T 2424.22-1986 Basic environmental testing procedures for electric and electronic products--Guidance for combined temperature (cold and heat) vibration (sinusoidal) tests
GB/T 12085.2-2022 Optics and photonics— Environmental test methods—Part 2: Cold, heat and humidity
GB/T 12085.16-1995 Optics and optical instruments--Environmental test methods--Combined bounce or steady state acceleration, in dry heat or cold
GB/T 42900-2023 High temperature compression test method for metallic materials with high strain rate
GB/T 228.2-2015 Metallic materials.Tensile testing.Part 2:Method of test at elevated temperature
GB/T 12085.2-2010 Optics and optical instruments.Enviromental test methods.Part 2:Cold,heat,humidity
GB/T 3002-2004 Refractory products-Determination of modulus of rupture at elevated temperatures
GB/T 2423.26-1992 Basic environmental testing procedures for electric and electronic products--Test Z/BM: combined heat/low air pressure tests
GB/T 5170.10-1996 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products. Combined high and low temperature/low air pressure testing equipment
GB/T 12085.10-2010 Optics and optical instruments.Environmental test methods.Part 10:Combined sinusoidal vibration and dry heat or cold
GB/T 12085.21-2011 Optics and optical instruments.Enviromental test methods.Part 21: Combined low pressure and ambient temperature or dry heat
GB/T 12085.10-1989 Optics and optical instruments--Environmental test methods--Combined sinusoidal vibration,dry heat,cold
GB/T 2423.26-2008 Environmental testing for electric and electronic products.Part 2 Test methods TestZ/BM:Combined dry heat/low air pressure tests
GB/T 6036-2001 Rubber,vulcanized or thermoplastic--Determination of low temperature stiffening(Gehman test)
GB/T 12085.15-1995 Optics and optical instruments--Environmental test methods--Combined random vibration wideband--Reproducibility medium, in dry heat or cold
GB/T 21333-2008 Rigid cellular plastics.Test methods for self-skinned, high-density materials
GB/T 4610-1984 Test for flammability of plastics--Ignition temperature test
GB/T 12085.22-2022 Optics and photonics—Environmental test methods—Part 22：Combined cold,dry heat or temperature change with bump or random vibration
GB/T 1634-1979 Test method of heat deflection temperature under bending load for plastics
GB/T 9343-2008 Test method for flammability of plastics.Determination of flash-ignition temperature and self-ignition temperature
GB/T 13243-1991 Test method for modulus of rupture of refactories containing carbon at elevated temperatures
GB/T 34108-2017(英文版) Metallic materials—High strain rate compression test method at ambient temperature
GB/T 12085.16-2010 Optics and optical instruments.Environmental test methods.Part 16:Combined bounce or steady-state acceleration and dry heat or cold
GB/T 31923.2-2015 Iron ores for blast furnace feedstocks.Determination of low-temperature reduction-disintegration indices by static method.Part 2:Reduction with CO and N<下标2>

Professional Standard - Chemical Industry, High and low temperature test plastic

HG/T 2-163-1965 Plastic low temperature elongation test method
HG/T 2-162-1965 Low temperature impact compression test method for plastics
HG/T 3613-1999 Rubber or plastics coated fabrics Low-temperature bend test
HG/T 4091-2009 Temperature test method for equipments lined with plastics

Association Francaise de Normalisation, High and low temperature test plastic

NF T51-196:1980 Plastics. Guide to cold and dry heat tests.
NF G37-111-1*NF EN 1876-1:1998 Rubber- or plastics-coated fabrics. Low temperature tests. Part 1 : bending test.
NF ISO 18766:2014 Caoutchouc vulcanisé ou thermoplastique - Essais à basses températures - Introduction générale et lignes directrices
NF T47-203-3*NF EN ISO 10619-3:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3 : bending tests at high and low temperatures.
NF EN ISO 10619-3:2012 Tuyaux et tubes en caoutchouc et en plastique - Mesurage de la flexibilité et de la rigidité - Partie 3 : essais de courbure à des températures basses et élevées
NF G37-111-2*NF EN 1876-2:1998 Rubber- or plastics-coated fabrics. Low temperature tests. Part 2 : impact test on loop.
NF EN 1876-1:1998 Supports textiles revêtus de caoutchouc ou de plastique - Essais à basse température - Partie 1 : essai de pliage.
NF EN ISO 13257:2018 Systèmes de canalisations thermoplastiques pour applications sans pression - Méthode d'essai de résistance à des cycles de température élevée
NF T40-104:1976 Rubber. General directions for achieving elevated or subnormal temperatures for tests.
NF EN 1876-2:1998 Supports textiles revêtus de caoutchouc ou de plastique - Essais à basse température - Partie 2 : essai de choc sur boucle.
NF T51-071-3*NF EN ISO 4589-3:2017 Plastics - Determination of burning behaviour by oxygen index - Part 3 : Elevated-temperature test
NF EN ISO 4589-3:2017 Plastiques - Détermination du comportement au feu au moyen de l'indice d'oxygène - Partie 3 : essai à haute température
NF T51-198:1979 Plastics. Guidelines for rapid temperature variation tests.-.
NF T51-071-3:1996 Plastics. Determination of burning behaviour by oxygen index. Part 3 : elevated-temperature test.
NF EN 12814-6:2000 Essais des assemblages soudés sur produits semi-finis en thermoplastiques - Partie 6 : essai de traction à basse température
NF A03-001-3*NF EN ISO 6892-3:2015 Metallic materials - Tensile testing - Part 3 : method of test at low temperature
NF D25-101-12*NF EN 1186-12:2003 Materials and articles in contact with foodstuffs - Plastics - Part 12 : test methods for overall migration at low temperatures.
NF T46-025:2013 Rubber, vulcanized or thermoplastic - Determination of low temperature stiffening (Gehman test)
NF T46-024*NF ISO 18766:2014 Rubber, vulcanized or thermoplastic - Low temperatures testing - General introduction and guide
NF A89-810-6*NF EN 12814-6:2000 Testing of welded joints of thermoplastics semi-finished products - Part 6 : low temperature tensile test
NF T54-119:1976 Plasticsplasticized PVC sheets. Conventional test method for high frequency welding.
NF D25-101-13*NF EN 1186-13:2003 Materials and articles in contact with foodstuffs - Plastics - Part 13 : test method for overall migration at high temperatures
NF ISO 1432:2021 Caoutchouc vulcanisé ou thermoplastique - Détermination de la rigidité à basse température (Essai Gehman)
NF A03-001-2*NF EN ISO 6892-2:2018 Metallic materials - Tensile testing - Part 2 : method of test at elevated temperature
NF A89-810-5*NF EN 12814-5:2000 Testing of welded joints of thermoplastics semi-finished products - Part 5 : macroscopic examination
NF EN 3745-405:2013 Série aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 405 : essai de courbure aux températures basse/haute
NF T46-025*NF ISO 1432:2021 Rubber, vulcanized or thermoplastic - Determination of low-temperature stiffening (Gehman test)
NF T54-915-1:2000 Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1 : specifications for pipes and the system.
NF T54-903:1996 Plastics piping systems. Thermoplastics piping systems for soil and waste discharge inside buildings. Test method for resistance to elevated temperature cycling.
NF L52-400-405*NF EN 3745-405:2013 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 405: low/High temperature bend test

International Organization for Standardization (ISO), High and low temperature test plastic

ISO 4672:1988 Rubber and plastics hoses; sub-ambient temperature flexibility tests
ISO 4672:1997 Rubber and plastics hoses - Sub-ambient temperature flexibility tests
ISO 4646:1978 Rubber or plastics coated fabrics — Low temperature impact test
ISO 4675:1979 Fabrics coated with rubber or plastics — Low temperature bend test
ISO 4675:1990 Rubber- or plastics-coated fabrics; low-temperature bend test
ISO 4646:1989 Rubber- or plastics-coated fabrics; low-temperature impact test
ISO 4675:2017 Rubber- or plastics-coated fabrics - Low-temperature bend test
ISO 4646:2022 Rubber- or plastics-coated fabrics — Low-temperature impact test
ISO 13257:2010 Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling
ISO 10619-3:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures
ISO/TS 7024:2005 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Thermoplastics - Recommended practice for installation
ISO 15579:2000 Metallic materials - Tensile testing at low temperature
ISO 783:1999 Metallic materials - Tensile testing at elevated temperature
ISO 783:1989 Metallic materials; tensile testing at elevated temperature
ISO 8770:2003 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polyethylene (PE)
ISO 7671:2003 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polypropylene (PP)
ISO 4589-3:1996 Plastics - Determination of burning behaviour by oxygen index - Part 3: Elevated-temperature test
ISO 4589-3:2017 Plastics - Determination of burning behaviour by oxygen index - Part 3: Elevated-temperature test
ISO 1432:1988 Rubber, vulcanized or thermoplastic; determination of low temperature stiffening (Gehman test)
ISO 1432:2021 Rubber, vulcanized or thermoplastic - Determination of low-temperature stiffening (Gehman test)
ISO 1432:2013 Rubber, vulcanized or thermoplastic - Determination of low-temperature stiffening (Gehman test)
ISO 7675:2003 Plastic piping systems for soil and waste discharge (low and high temperature) inside buildings - Chlorinated poly(vinyl chloride) (PVC-C)
ISO 6892-3:2015 Metallic materials - Tensile testing - Part 3: Method of test at low temperature
ISO 28702:2008 Rubber and plastics hoses and tubing - Textile-reinforced types - Sub-ambient temperature crush test
ISO 18766:2014 Rubber, vulcanized or thermoplastic - Low temperature testing - General introduction and guide
ISO 3633:2002 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U)
ISO 19220:2004 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Styrene copolymer blends (SAN + PVC)
ISO 19220:2021 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Styrene copolymer blends (SAN + PVC)
ISO 7682:2003 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Acrylonitrile-butadiene-styrene (ABS)
ISO/R 783:1968 Mechanical testing of steel at elevated temperatures — Determination of lower yield stress and proof stress and proving test
ISO 22183:2023 Plastics — Validation of force-time curves obtained from high-speed tensile tests
ISO 23838:2022 Metallic materials — High strain rate torsion test at room temperature
ISO 1432:1988/Cor 1:2003 Rubber, vulcanized or thermoplastic - Determination of low temperature stiffening (Gehman test); Technical Corrigendum 1
ISO 9054:1990 Cellular plastics, rigid; test methods for self-skinned, high-density materials

American National Standards Institute （ANSI), High and low temperature test plastic

ANSI/TIA-455-37-A-1993 Low or High Temperature Bend Test
ANSI/EIA/TIA 455-37A:1993 Fiber Optic Cable Bend Test, Low and High Temperature
ANSI/TIA-455-37A-1993 Fiber Optic Cable Bend Test, Low and High Temperature
ANSI/EIA 364-105-A:2008 Altitude - Low Temperature Test Procedure for Electrical Connectors
ANSI/ASTM E21:1992 Test Methods for Elevated Temperature Tension Tests of Metallic Materials
ANSI/TIA/EIA 455-69-A-1991 Test Procedure for Minimum and Maximum Exposure Temperature Evaluation of Optical Fibers

HU-MSZT, High and low temperature test plastic

MSZ 7535-1984

British Standards Institution (BSI), High and low temperature test plastic

BS EN 1876-1:1998 Rubber- or plastics-coated fabrics - Low temperature tests - Bending test
BS ISO 4646:2022 Rubber- or plastics-coated fabrics. Low-temperature impact test
BS EN 1876-2:1998 Rubber- or plastics-coated fabrics - Low temperature tests - Impact test on loop
BS ISO 10619-3:2011 Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness. Bending tests at high and low temperatures
21/30410903 DC BS ISO 4646. Rubber- or plastics-coated fabrics. Low-temperature impact test
16/30334089 DC BS ISO 4675. Rubber- or plastics-coated fabrics. Low-temperature bend test
BS EN ISO 13257:2017 Thermoplastics piping systems for non-pressure applications. Test method for resistance to elevated temperature cycling
BS EN 12814-6:2000 Testing of welded joints of thermoplastics semi-finished products - Low temperature tensile test
BS PD CEN/TR 13801:2014 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Thermoplastics. Recommended practice for installation
BS ISO 13257:2010 Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling
BS EN ISO 4589-3:1996 Plastics. Determination of burning behaviour by oxygen index. Elevated temperature test
BS EN 1186-12:2002 Materials and articles in contact with foodstuffs - Plastics - Test methods for overall migration at low temperatures
BS ISO 1432:2013 Rubber, vulcanized or thermoplastic. Determination of low-temperature stiffening (Gehman test)
BS ISO 1432:2021 Rubber, vulcanized or thermoplastic. Determination of low-temperature stiffening (Gehman test)
BS EN ISO 6892-3:2015 Metallic materials. Tensile testing. Method of test at low temperature
BS ISO 28702:2008 Rubber and plastics hoses and tubing - Textile reinforced types - Sub-ambient temperature crush test
BS ISO 18766:2014 Rubber, vulcanized or thermoplastic. Low temperature testing. General introduction and guide
BS EN 10002-3:1995(1999) Metallic Materials - Tensile Testing - Part 5: Method of Testing at Elevated Temperature
BS EN 10002-4:1995(1999) Metallic Materials - Tensile Testing - Part 5: Method of Testing at Elevated Temperature
BS EN 10002-5:1992(1999) Metallic Materials - Tensile Testing - Part 5: Method of Testing at Elevated Temperature
BS 2782-1 Method 150C:1983 Methods of testing plastics - Thermal properties - Determination of low temperature extensibility of flexible polyvinyl chloride sheet
BS EN 1186-13:2002 Materials and articles in contact with foodstuffs - Plastics - Test methods for overall migration at high temperatures
BS EN 1186-14:2002 Materials and articles in contact with foodstuffs - Plastics - Test methods for 'substitute tests' for overall migration from plastics intended to come into contact with fatty foodstuffs using test media iso-octane and 95% ethanol
BS EN ISO 13257:2018 Tracked Changes. Thermoplastics piping systems for non-pressure applications. Test method for resistance to elevated temperature cycling
BS 5173-106.2:1990 Methods of test for rubber and plastics hoses and hose assemblies - Environmental tests - General requirements for high temperature ageing tests
BS ISO 23838:2022 Metallic materials. High strain rate torsion test at room temperature
DD ENV 13801-2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Thermoplastics. Recommended practice for installation
BS 903-A6:1992 Physical testing of rubber - Method for determination of compression set at ambient, elevated or low temperatures
BS EN ISO 6892-2:2011 Metallic materials. Tensile testing. Method of test at elevated temperature
DD ENV 1329-2-2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Unplasticized poly(vinyl chloride) (PVC-U). Guidance for the assessment of conformity
BS EN ISO 4589-2:1999 Plastics - Determination of burning behaviour by oxygen index - Ambient-temperature test
BS EN ISO 4589-2:1996 Plastics. Determination of burning behaviour by oxygen index. Ambient-temperature test
BS EN ISO 4589-2:2017 Plastics. Determination of burning behaviour by oxygen index. Ambient-temperature test
DD ENV 1451-2-2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP). Guidance for the assessment of conformity
DD ENV 1519-2-2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polyethylene (PE). Guidance for the assessment of conformity
BS ISO 22183:2023 Plastics. Validation of force-time curves obtained from high-speed tensile tests
BS EN ISO 4589-3:2017 Tracked Changes. Plastics. Determination of burning behaviour by oxygen index. Elevated-temperature test
BS PD CEN/TS 1329-2:2021 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Unplasticized poly(vinyl chloride) (PVC-U). Guidance for the assessment of conformity
BS EN 60811-504:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Bending tests at low temperature for insulation and sheaths
19/30388626 DC BS ISO 1432. Rubber, vulcanized or thermoplastic. Determination of low-temperature stiffening (Gehman test)
BS 5173 Sec.106.2:1990 Methods of test for rubber and plastics hoses and hose assemblies. Environmental tests. General requirements for high temperature ageing tests
BS EN 1055:1996 Plastics piping systems - Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for resistance to elevated temperature cycling
BS EN 60811-506:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Impact test at low temperature for insulations and sheaths
BS EN ISO 9054:1999 Cellular plastics, rigid - Test methods for self-skinned high-density materials

U.S. Military Regulations and Norms, High and low temperature test plastic

ARMY MIL-P-43038 B NOTICE 4-2000 PLASTIC MOLDING MATERIAL, POLYESTER, LOW-PRESSURE LAMINATING, HIGH TEMPERATURE RESISTANT
ARMY MIL-P-43038 B VALID NOTICE 5-2013 Plastic Molding Material, Polyester, Low-Pressure Laminating, High Temperature Rresistant
ARMY MIL-P-43038 B REINST NOTICE 3-2000 PLASTIC MOLDING MATERIAL, POLYESTER, LOW-PRESSURE LAMINATING, HIGH TEMPERATURE RESISTANT

SE-SIS, High and low temperature test plastic

SIS SS-ISO 4672:1990 Rubber and plastics hoses — Sub-ambient temperature flexibility tests
SIS SS 3550-1986 Plastics pipes and fittings - Temperature cycling test
MNC 323-1982 Metallic materials - Testing at elevated temperatures. Creep testing. Relaxation testing
MNC 323 E-1984 Metallic materials - Testing at elevated temperatures. Creep testing . Relaxation testing - Summary
MNC 323-1979 Metallic materials — Testing at elevated temperatures. Creep testing. Relaxation testing
MNC 323 E-1981 Metallic materials — Testing at elevated temperatures. Creep testing. Relaxation testing — Summary
MNC 323-1981 Metallic materials — Testing at elevated temperatures. Creep testing. Relaxation testing
MNC 323 E-1982 Metallic materials - Testing at elevated temperatures. Creep testing . Relaxation testing - Summary
MNC 323-1984 Metallic materials - Testing at elevated temperatures. Creep testing. Relaxation testing

Professional Standard - Aerospace, High and low temperature test plastic

QJ 1621-1989 Low temperature compression test method for rigid foamed plastics
QJ 1620-1989 Low temperature tensile test method for rigid foamed plastics
QJ 20052-2011 Cryogenic test method for high pressure helium valve
QJ 3061-1998 Hydrogen-oxygen rocket engine low temperature and high speed bearing test method

Korean Agency for Technology and Standards (KATS), High and low temperature test plastic

KS M ISO 4646:2009 Rubber- or plastics-coated fabrics-Low-temperature impact test
KS M ISO 4675:2012 Rubber- or plastics-coated fabrics－Low-temperature bend test
KS M ISO 4675-2012(2017) Rubber- or plastics-coated fabrics－Low-temperature bend test
KS M ISO 4675-2012(2022) Rubber- or plastics-coated fabrics－Low-temperature bend test
KS M ISO 4646-2009(2019) Rubber- or plastics-coated fabrics－Low-temperature impact test
KS C 0277-1997 Background information, Section 0ne -Cold and dry heat tests
KS M 6676-2008 Rubber, vulcanized or thermoplastic－Determination of low temperature properties
KS R 0016-1971 Method of high and low temperature test for automobile parts
KS M ISO 10619-3:2014 Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 3: Bending tests at high and low temperatures
KS M ISO 10619-3-2014(2019) Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 3: Bending tests at high and low temperatures
KS R 9191-1996 High and low temperature testing methods for parts of railway signaling
KS R 0016-2015 Method of high and low temperature test for automobile parts
KS R 9213-2007 Railway rolling stock－High and low temperature test methods of parts
KS M ISO 4589-3-2002(2022) Plastics－Determination of burning behaviour by oxygen index－Part 3：Elevated－temperature test
KS R 9213-2007(2017) Railway rolling stock－High and low temperature test methods of parts
KS R 9191-1996(2016) High and low temperature testing methods for parts of railway signaling
KS M ISO 4589-3:2002 Plastics－Determination of burning behaviour by oxygen index－Part 3：Elevated－temperature test
KS M ISO 3633-2012(2022) Plastics piping systems for soil and waste discharge(low and high temperature) inside buildings－Unplasticized poly(vinyl chloride) (PVC-U)
KS M ISO 3633-2012(2017) Plastics piping systems for soil and waste discharge(low and high temperature) inside buildings－Unplasticized poly(vinyl chloride) (PVC-U)
KS M ISO 3383-2002(2007) Rubber－General directions for achieving elevated or subnormal temperatures for test purposes
KS M ISO 28702:2009 Rubber and plastics hoses and tubing-Textile-reinforced types-Sub-ambient temperature crush test
KS M ISO 3633:2012 Plastics piping systems for soil and waste discharge(low and high temperature) inside buildings－Unplasticized poly(vinyl chloride) (PVC-U)
KS M 3038-2013 Test method for tensile heat distortion temperature of plastic sheeting
KS M 3065-2003 TESTING MATHOD FOR DEFLECTION TEMPERATURE OF RIGID PLASTICS UNDER LOAD
KS M 3065-1982 TESTING MATHOD FOR DEFLECTION TEMPERATURE OF RIGID PLASTICS UNDER LOAD
KS M ISO 1432:2009 Rubber, vulcanized or thermoplastic-Determination of low temperature stiffening(Gehman test)
KS M ISO 1432:2014 Rubber, vulcanized or thermoplastic — Determination of low temperature stiffening (Gehman test)
KS M ISO 7682:2009 Plastics piping systems for soil and waste discharge(low and high temperature) inside buildings－Acrylonitrile-butadiene-styrene(ABS)
KS M 3059-2008 Test method for brittleness temperature of plastics and elastomers by impact
KS M ISO 4672:2008 Rubber and plastics hoses－Sub-ambient temperature flexibility tests
KS M ISO 4672:2013 Rubber and plastics hoses-Sub-ambient temperature flexibility tests
KS M ISO 7682:2019 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Acrylonitrile-butadiene-styrene(ABS)
KS M 3059-1993 Test method for brittleness temperature of plastics and elastomers by impact
KS M ISO 9054:2010 Cellular plastics, rigid－Test methods for self-skinned,high-density materials

GOSTR, High and low temperature test plastic

GOST ISO 4675-2019 Rubber- or plastics-coated fabrics. Low-temperature bend test

PL-PKN, High and low temperature test plastic

PN C89055-1986 Plastics sheeting Test metods of the resistance to Iow temperatur?
PN E04160-46-1987 Electric cables Methods of testing Test of resistance to Iow temperature of rubber of thermoplastic insulation of sheath

国家市场监督管理总局、中国国家标准化管理委员会, High and low temperature test plastic

GB/T 18426-2021 Rubber- or plastics-coated fabrics—Low-temperature bend test
GB/T 39933-2021 Rotational moulding—Test method for low temperature impact
GB/T 23711.2-2019 Test method for pressure vessels lined with plastics—Part 2:Low-temperature testing
GB/T 2423.63-2019 Environmental testing—Part 2:Test methods—Test: combined temperature(cold and heat)/low air pressure/vibration（mixed mode）
GB/T 23711.3-2019 Test method for pressure vessels lined with plastics—Part 3:High-temperature inspection
GB/T 39249-2020 Rubber and plastics hoses and tubing—Textile-reinforced types—Sub-ambient temperature crush test
GB/T 228.3-2019 Metallic materials—Tensile testing—Part 3: Method of test at low temperature
GB/T 37783-2019 Metallic materials—High strain rate tensile test method at elevated temperature
GB/T 39692-2020 Rubber,vulcanized or thermoplastic—Low temperature testing—General introduction and guide
GB/T 38804-2020 Test method for oxidation of metallic materials exposed in high-temperature steam
GB/T 6036-2020 Rubber,vulcanized or thermoplastic—Determination of low-temperature stiffening(Gehman test)

IT-UNI, High and low temperature test plastic

UNI 5111-1969 Mechanical tests of ferrous materials. Creep test for steel at elevated temperatures.
UNI 5814-1966
UNI 5812-1966
UNI 5642-1965
UNI ISO 1432:2021 Rubber, vulcanized or thermoplastic -- Determination of low-temperature stiffening (Gehman test)
UNI 5641-1965

European Committee for Standardization (CEN), High and low temperature test plastic

EN ISO 4672:1999 Rubber and Plastics Hoses - Sub-Ambient Temperature Flexibility Tests
prEN 495-5-1991 Thermoplastic and elastomeric roofing and sealing sheets; low temperature folding test
EN 12814-6:2000 Testing of welded joints of thermoplastics semi-finished products - Part 6: Low temperature tensile test
EN 24672:1993 Rubber and plastics hoses; sub-ambiant temperature flexibility tests (ISO 4672:1988)
EN 1876-1:1997 Rubber- or Plastics-Coated Fabrics - Low-Temperature Tests - Part 1: Bending Test
EN 1876-2:1997 Rubber- or plastics-coated fabrics - Low temperature tests - Part 2: Impact test on loop
EN ISO 10619-3:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011)
EN 1186-12:2002 Materials and articles in contact with foodstuffs - Plastics - Part 12: Test methods for overall migration at low temperatures
EN ISO 4589-3:2017 Plastics - Determination of burning behaviour by oxygen index - Part 3: Elevated-temperature test
DD ENV 13801-2000 Plastics Piping Systems for Soil and Waste Discharge (Low and High Temperature) within the Building Structure - Thermoplastics - Recommended Practice for Installation
PD CEN/TR 13801:2014 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Thermoplastics - Recommended practice for installation
CEN/TR 13801:2014 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Thermoplastics - Recommended practice for installation
EN 10002-5:1991 Metallic Materials - Tensile Testing - Part 5: Method of Testing at Elevated Temperature
EN ISO 4589-3:1996 Plastics - Determination of Burning Behaviour by Oxygen Index - Part 3: Elevated-Temperature Test ISO 4589-3: 1996
EN 1186-13:2002 Materials and articles in contact with foodstuffs - Plastics - Part 13: Test methods for overall migration at high temperatures
DD ENV 1186-13-1999 Materials and Articles in Contact with Foodstuffs - Plastics - Part 13: Test Method for Overall Migration at High Temperatures
EN ISO 9054:1999 Cellular Plastics, Rigid - Test Methods for Self-Skinned, High-Density Materials

Group Standards of the People's Republic of China, High and low temperature test plastic

T/CAS 263-2017 Rotational molding—Low temperature impact test
T/WHQASA 1-2021 Test method for high and low temperature matching dimensions of automobile composite outer cover
T/WJGY 014-2023 Thermoplastic polypropylene pipes—Low temperature impact resistance—Test method
T/CSTM 00649-2021 Metallic materials—High temperature Rockwell hardness test method
T/CSTM 00650-2021 Metallic materials—High temperature Vickers hardness test method
T/CNS 6-2018 Electrochemistry test method in high temperature high pressure water for metallic materials used in nuclear power plants
T/JSTERA 21-2020 Test code for high temperature crush value of coarse aggregate for asphalt pavement

Professional Standard - Electron, High and low temperature test plastic

SJ/T 10212-1991 Testing equipment,high and low temperature/low air pressure Y60600-G
SJ 2326-1983 Generic specification for high and low temperature low pressure test chambers
SJ/Z 9001.44-1987 Basic environmental testing procedures--Part 3: Background information--Section One:Cold and dry heat tests

Danish Standards Foundation, High and low temperature test plastic

DS/EN 12814-6:2000 Testing of welded joints of thermoplastics semi-finished products - Part 6: Low temperature tensile test
DS/EN 1876-1:1998 Rubber- or plastics-coated fabrics - Low-temperature tests - Part 1: Bending test
DS/EN 1876-2:1998 Rubber- or plastics-coated fabrics - Low temperature tests - Part 2: Impact test on loop
DS/EN 24672:1993 Rubber and plastics hoses. Sub-ambient temperature flexibility tests
DS/EN ISO 10619-3:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures
DS/EN ISO 4589-3:1997 Plastics - Determination of burning behavior by oxygen index - Part 3: Elevated-temperature test
DS/ENV 13801:2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Thermoplastics - Recommended practice for installation
DS/EN 1186-12:2002 Materials and articles in contact with foodstuffs - Plastics - Part 12: Test methods for overall migration at low temperatures
DS/INSTA 213:1990 Plastic pipies and fittings. Temperature cycling test
DS/EN 1055:1997 Plastics piping systems - Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for resistance to elevated temperature cycling
DS/EN 10002-5:1994 Metallic materials-Tensile testing-Part 5:Method of testing at elevated temperature
DSF M268237-2013 Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature
DS/EN 1186-13:2002 Materials and articles in contact with foodstuffs - Plastics - Part 13: Test methods for overall migration at high temperatures
DS/EN 3745-405:2012 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 405: Low/High temperature bend test

Lithuanian Standards Office , High and low temperature test plastic

LST EN 12814-6-2000 Testing of welded joints of thermoplastics semi-finished products - Part 6: Low temperature tensile test
LST EN 1876-1-2000 Rubber- or plastics-coated fabrics - Low-temperature tests - Part 1: Bending test
LST EN 1876-2-2000 Rubber- or plastics- coated fabrics - Low temperature tests - Part 2: Impact test on loop
LST L ENV 13801-2002 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Thermoplastics - Recommended practice for installation
LST EN ISO 10619-3:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011)
LST EN 1186-12-2002 Materials and articles in contact with foodstuffs - Plastics - Part 12: Test methods for overall migration at low temperatures
LST EN 1055-2002 Plastics piping systems - Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for resistance to elevated temperature cycling
LST EN ISO 4589-3:2000 Plastics - Determination of burning behaviour by oxygen index - Part 3: Elevated-temperature test (ISO 4589-3:1996)
LST EN 1186-13-2002 Materials and articles in contact with foodstuffs - Plastics - Part 13: Test methods for overall migration at high temperatures
LST EN 3745-405-2012 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 405: Low/High temperature bend test
LST ISO 7671:2004 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polypropylene (PP) (idt ISO 7671:2003)

German Institute for Standardization, High and low temperature test plastic

DIN EN 12814-6:2000-03 Testing of welded joints of thermoplastics semi-finished products - Part 6: Low temperature tensile test; German version EN 12814-6:2000
DIN EN 12814-6:2000 Testing of welded joints of thermoplastics semi-finished products - Part 6: Low temperature tensile test; German version EN 12814-6:2000
DIN EN 1876-1:1998 Rubber or plastics coated fabrics - Low temperatures tests - Part 1: Bending test; German version EN 1876-1:1997
DIN EN 1876-1:1998-01 Rubber or plastics coated fabrics - Low temperatures tests - Part 1: Bending test; German version EN 1876-1:1997
DIN EN ISO 4589-3:1996 Plastics - Determination of burning behaviour by oxygen index - Part 3: Elevated-temperature test (ISO 4589-3:1996); German version EN ISO 4589-3:1996
DIN EN ISO 4589-2:2006 Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:1996 + Amd. 1:2005)(includes Amendment A1:2006) English version of DIN EN ISO 4589-2:1999 + A1:2006-06
DIN EN 1876-2:1998-01 Rubber or plastics coated fabrics - Low temperatures tests - Part 2: Impact test on loop; German version EN 1876-2:1997
DIN EN 1876-2:1998 Rubber or plastics coated fabrics - Low temperatures tests - Part 2: Impact test on loop; German version EN 1876-2:1997
DIN EN ISO 10619-3:2012-03 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011); German version EN ISO 10619-3:2011
DIN CEN/TR 13801:2014-07*DIN SPEC 19637:2014-07 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Thermoplastics - Recommended practice for installation; German version CEN/TR 13801:2014
DIN EN ISO 6892-3:2015-07 Metallic materials - Tensile testing - Part 3: Method of test at low temperature (ISO 6892-3:2015); German version EN ISO 6892-3:2015
DIN V ENV 13801:2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Thermoplastics - Recommended practice for installation; German version ENV 13801:2001
DIN ISO 15579:2002 Metallic materials - Tensile testing at low temperature (ISO 15579:2000)
DIN EN 1186-13:2002 Materials and articles in contact with foodstuffs - Plastics - Part 13: Test methods for overall migration at high temperatures; German version EN 1186-13:2002
DIN EN ISO 6892-2:2018-09 Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2018); German version EN ISO 6892-2:2018
DIN EN ISO 4589-3:2017 Plastics - Determination of burning behaviour by oxygen index - Part 3: Elevated-temperature test (ISO 4589-3:2017)
DIN EN ISO 10619-3:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011); German version EN ISO 10619-3:2011

AENOR, High and low temperature test plastic

UNE-EN 12814-6:2001 Testing of welded joints of thermoplastics semi-finished products - Part 6: Low temperature tensile test.
UNE-EN 1876-1:1998 Rubber- or plastics-coated fabrics - Low-temperature tests - Part 1: Bending test
UNE-EN 1876-2:1998 Rubber- or plastics- coated fabrics - Low temperature tests - Part 2: Impact test on loop
UNE 53944:2011 IN Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Thermoplastics - Recommended practice for installation.
UNE-EN 1055:1996 Plastics piping systems - Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for resistance to elevated temperature cycling
UNE-EN ISO 4589-3:2017 Plastics - Determination of burning behaviour by oxygen index - Part 3: Elevated-temperature test (ISO 4589-3:2017)
UNE-ISO 1432:2013 Rubber, vulcanized or thermoplastic -- Determination of low temperature stiffening (Gehman test)

Japanese Industrial Standards Committee (JISC), High and low temperature test plastic

JIS Z 2279:1992 Method of high temperature low cycle fatigue testing for metallic materials
JIS K 6404-13:1999 Testing methods for rubber-or plastics-coated fabrics -- Part 13: Low-temperature bend test
JIS K 7201-3:2008 Plastics -- Determination of burning behaviour by oxygen index -- Part 3: Elevated-temperature test
JIS K 6261:1997 Low temperature testing methods for rubber, vulcanized or thermoplastic
JIS D 0204:1967 Method of high and low temperature test for automobile parts
JIS E 3019:2018 High and low temperature testing methods for parts of railway signalling
JIS E 4035:1995 Railway rolling stock.High and low temperature test methods of parts
JIS K 6404-20:1999 Testing methods for rubber-or plastics-coated fabrics -- Part 20: Torsion test at low temperature
JIS K 7201-3:2021 Plastics -- Determination of burning behaviour by oxygen index -- Part 3: Elevated-temperature test
JIS K 6330-4:2003 Testing methods for rubber and plastics hoses -- Part 4: Sub-ambient temperature flexibility tests
JIS K 6261-3:2017 Rubber, vulcanized or thermoplastic -- Determination of low-temperature properties -- Part 3: Low temperature stiffening (Gehman test)
JIS K 6261-4:2017 Rubber, vulcanized or thermoplastic -- Determination of low-temperature properties -- Part 4: Low-temperature retraction (TR test)
JIS C 60068-3-1:1995 Background information, Section One -- Cold and dry heat tests
JIS Z 2281:1993 Test method for continuous oxidation test at elevated temperatures for metallic materials
JIS K 6816:2008 Thermoplastics pipes and fittings -- Test method for Vicat softening temperature
JIS Z 2291:2004 Method for high-temperature gaseous corrosion test of metallic materials
JIS Z 2290:2004 General rules for high-temperature corrosion test of metallic materials
JIS Z 2280:1993 Test method for Young's modulus of metallic materials at elevated temperature
JIS Z 2282:1996 Method of cyclic oxidation testing at elevated temperatures for metallic materials
JIS Z 2286:2003 Method for high temperature rotating bending fatigue testing of metallic materials
JIS Z 2292:2004 Method for high-temperature corrosion test of metallic materials by salt coating

Professional Standard - Machinery, High and low temperature test plastic

JB/T 8250.5-1999 High-temperature and low-temperature test method for cameras
JB/T 4278.8-1993 Rubber plastic wire and cable test equipment verification method low temperature test chamber
JB/T 4278.2-1993 Rubber plastic wire and cable test equipment verification method low temperature impact test device
JB/T 4278.8-2011 Verification procedure for test equipment of rubber plastic wire and cable.Part 8: Low temperature test oven
JB/T 6865-1993 Pendulum type high and low temperature impact testing machine technical conditions
JB/T 4278.11-2011 Verification procedure for test equipment of rubber plastic wire and cable.Part 11: Low temperature bending test device
JB/T 4278.2-2011 Verification procedure for test equipment of rubber plastic wire and cable.Part 2: Low temperature impact test device
JB/T 4278.12-2011 Verification procedure for test equipment of rubber plastic wire and cable.Part 12: High temperature pressure test device

工业和信息化部/国家能源局, High and low temperature test plastic

JB/T 13229-2017 High and low temperature environmental chamber for testing machine

TIA - Telecommunications Industry Association, High and low temperature test plastic

EIA/TIA-455-37A-1993 FOTP-37 Low or High Temperature Bend Test for Fiber Optic Cable

Taiwan Provincial Standard of the People's Republic of China, High and low temperature test plastic

CNS 5434-1989 Method of Test for High and Low Temperature for Automobile Parts
CNS 13786-1996 Method of Test for Brittleness Temperature of Plastics
CNS 11788-1986 Method of Test for Fiber Optic Devices (FOTP-37 Cable Bend Test Low and High Temperature)
CNS 3564-2007 Low temperature testing methods for rubber, vulcanized or thermoplastic
CNS 12867-1991 Basic Environmental Testing Procedures Part 2 : Tests-Test Z/AM : Combined Dry Heat/Low Air Pressure Tests

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, High and low temperature test plastic

GB/T 33861-2017 Testing method of energy efficiency for temperature test chambers
GB/T 5565.3-2017 Rubber and plastics hoses and tubing—Measurement of flexibility and stiffness—Part 3:Bending tests at high and low temperatures
GB/T 34218-2017 Refractory products—Determination of compressive strength at elevated temperature
GB/T 34220-2017 Refractory Products—Determination of tensile strength at elevated temperature
GB/T 34217-2017 Refractory products—Determination of torsion strength at elevated temperature
GB/T 3002-2017 Refractory products—Determination of modulus of rupture at elevated temperatures
GB/T 33622-2017 Flexible cellular polymeric materials—Low-temperature flex test

RU-GOST R, High and low temperature test plastic

GOST 28788-1990 Rubber- or plastics-coated fabrics. Low-temperature impact test
GOST 28789-1990 Rubber- or plastics-coated fabrics. Low temperature bend test
GOST 33519-2015 Polymer composites. Test method for compression at normal, low and high temperatures
GOST 25.602-1980 Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for compression properties at normal, elevated and low temperatures
GOST 25.603-1982 Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for tensile properties of ring specimens at normal, elevated and low temperatures
GOST 25.604-1982 Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for bending properties at normal, elevated and low temperatures
GOST 9454-1978 Metals. Method for testing the impact strength at low, room and high temperature
GOST R ISO 18766-2017 Vulcanized rubber and thermoplasts. Low temperature testing. General requirements
GOST 25.601-1980 Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for tensile properties on plane specimens at normal, elevated and law temperatures
GOST R 57706-2017 Ceramic composites. Method of tension tests at elevated temperature
GOST R 57605-2017 Ceramic composites. Test method of compression at elevated temperature
GOST 34195-2017 Diesel fuels. Determination of filterability by low-temperature flow test (LTFT)
GOST 22663-1977 Thermoelectrode materials for low-temperature thermocouples. Method of homogeneity test
GOST R ISO 815-2-2017 Vulcanized rubber and thermoplasts. Determination of compression set. Part 2. Test at low temperatures
GOST R IEC 811-1-4-1994 General test methods for insulating and sheathing materials of electric cables. Tests at low temperature

(U.S.) Telecommunications Industries Association , High and low temperature test plastic

TIA-455-37-A-1993 FOTP-37 Low or High Temperature Bend Test for Fiber Optic Cable
TIA-455-37-A-2000(2013) FOTP-37 Low or High Temperature Bend Test for Fiber Optic Cable

Professional Standard - Aviation Industry, High and low temperature test plastic

Q/HBm 109-1994 High temperature and low temperature test methods for auto parts

Professional Standard - Military and Civilian Products, High and low temperature test plastic

WJ 749-1994 Water immersion, low temperature, high temperature and high humidity test methods for glue used in optical instruments

工业和信息化部, High and low temperature test plastic

WJ/T 749-2014 Test methods for water immersion, low temperature, high temperature and high humidity for glue used in optical instruments
JB/T 13702.1-2019 Camera Environmental Testing Part 1: High and Low Temperature Tests
HG/T 4091-2022 Temperature resistance test method for plastic lining equipment

Standard Association of Australia （SAA）, High and low temperature test plastic

AS/NZS 1462.16:2006 Methods of test for plastics pipes and fittings - Method for high temperature testing of pipe
AS 2291:2020 Metallic materials — Tensile testing — Test at elevated temperature
AS 1580.409.2:2002 Paints and related materials - Methods of test - Low temperature coalescence
AS 1774.1:2000 Refractories and refractory materials - Physical test methods - Determination of cold compressive strength
AS 2291:2007 Metallic materials - Tensile testing at elevated temperatures
AS/NZS 7671:2010
AS 1774.27:2001 Refractories and refractory materials - Physical test methods - Modulus of rupture at elevated temperatures

CEN - European Committee for Standardization, High and low temperature test plastic

EN ISO 13257:2017 Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling
EN ISO 13257:2018 Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling

AT-ON, High and low temperature test plastic

ONORM EN 24672-1993 Rubber and plastics hoses - Sub-ambiant temperature flexibility tests (ISO 4672:1988)
ONORM EN 10002-5-1992 Metallic materials - Tensile testing - Method of testing at elevated temperature

Professional Standard - Aviation, High and low temperature test plastic

HBm 60-1987 High-temperature and low-temperature test methods for instrumentation of miniature automobiles

Liaoning Provincial Standard of the People's Republic of China, High and low temperature test plastic

DB21/T 2761-2017 High and low temperature test specification for wind power gearbox

Professional Standard - Ocean, High and low temperature test plastic

HY 21.1-1992 The basic method of environmental test for oceanographic instruments - Guideline for high and low temperature test
HY 21.2-1992 The basic method of environmental test for oceanographic instruments - Guideline for high and low temperature storage test

American Society for Testing and Materials (ASTM), High and low temperature test plastic

ASTM D793-49(1976)e1 Method of Test for Short-Time Stability at Elevated Temperatures of Plastics Containing Chlorine
ASTM D7735-11(2016) Standard Test Method for Type A Durometer Hardness Testing of Road Marking Thermoplastic at Elevated Temperatures
ASTM D7735-11 Standard Test Method for Type A Durometer Hardness Testing of Road Marking Thermoplastic at Elevated Temperatures
ASTM E21-17e1 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
ASTM E21-17 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
ASTM E21-03 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
ASTM E21-03a Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
ASTM E21-05 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
ASTM E21-20 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
ASTM D1525-17 Standard Test Method for Vicat Softening Temperature of Plastics
ASTM E21-92(1998)e1 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
ASTM E21-92(1998) Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
ASTM D4451-02(2008) Standard Test Method for Pigment Content of Paints by Low-Temperature Ashing
ASTM C411-11 Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation
ASTM D1929-11 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D1929-14 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D1929-13 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D1929-13a Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D1929-23 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM E531-76(2001) Standard Practice for Surveillance Testing of High-Temperature Nuclear Component Materials
ASTM E531-76(2007) Standard Practice for Surveillance Testing of High-Temperature Nuclear Component Materials
ASTM D4305-98a Standard Test Method for Filter Flow of Aviation Fuels at Low Temperatures
ASTM D1525-00 Standard Test Method for Vicat Softening Temperature of Plastics
ASTM D1525-07 Standard Test Method for Vicat Softening Temperature of Plastics
ASTM D1525-06 Standard Test Method for Vicat Softening Temperature of Plastics
ASTM D1525-09 Standard Test Method for Vicat Softening Temperature of Plastics
ASTM E531-76(1996)e1 Standard Practice for Surveillance Testing of High-Temperature Nuclear Component Materials
ASTM D4539-17 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
ASTM D4539-16 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
ASTM D4305-98a(2004)e1 Standard Test Method for Filter Flow of Aviation Fuels at Low Temperatures
ASTM C16-03(2012)e2 Standard Test Method for Load Testing Refractory Shapes at High Temperatures
ASTM C16-03(2012)e1 Standard Test Method for Load Testing Refractory Shapes at High Temperatures
ASTM D1204-08 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
ASTM D1204-14 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
ASTM D4539-98 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
ASTM D453-94(2000)e1 Standard test method for filterability of diesel fuel by cryogenic flow test
ASTM D1929-16 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D4451-85(1996) Standard Test Method for Pigment Content of Paints by Low-Temperature Ashing
ASTM D4451-02 Standard Test Method for Pigment Content of Paints by Low-Temperature Ashing
ASTM D4451-02(2021) Standard Test Method for Pigment Content of Paints by Low-Temperature Ashing
ASTM D4451-22 Standard Test Method for Pigment Content of Paints by Low-Temperature Ashing
ASTM D6468-99 Standard Test Method for High Temperature Stability of Distillate Fuels
ASTM C583-05(2009) Standard Test Method for Modulus of Rupture of Refractory Materials at Elevated Temperatures
ASTM D6468-99(2004) Standard Test Method for High Temperature Stability of Distillate Fuels
ASTM D6468-06 Standard Test Method for High Temperature Stability of Distillate Fuels
ASTM C583-15(2021) Standard Test Method for Modulus of Rupture of Refractory Materials at Elevated Temperatures
ASTM D7735-17(2022) Standard Test Method for Type A Durometer Hardness Testing of Thermoplastic Pavement Marking at Elevated Temperatures
ASTM D7735-17 Standard Test Method for Type A Durometer Hardness Testing of Thermoplastic Pavement Marking at Elevated Temperatures

Canadian General Standards Board （CGSB), High and low temperature test plastic

CGSB 1-GP-71 METH 119.4-1979 Methods of Testing Paints and Pigments Flexibility Low-Temperature
CGSB 1-GP-71 METH 103.3-1979 Methods of Testing Paints and Pigments Drying Conditions Low-Temperature Conditioning in Air

Professional Standard - Railway, High and low temperature test plastic

TB/T 2953-2015 High and low temperature testing methods for parts of railway signaling
TB/T 2953-1999 High temperature and low temperature test methods for railway ground signal products

CZ-CSN, High and low temperature test plastic

CSN 34 7010 Cast.68-1972 Low and high temperature endurance test of fibrous impregnated coverings
CSN 34 7010 Cast.69-1972 Low and high temperature endurance test of fibrous impregnated coveringa
CSN 26 9305-1983 Plastic crates. Testing method of stability to the form and dimension through the action of higher temperature

Military Standard of the People's Republic of China-General Armament Department, High and low temperature test plastic

GJB 573.7-1988 Fuze environment and performance test methods High and low temperature storage test
GJB 796.6-1990 High and low temperature test procedures for design and finalization of military fixed bridge beam equipment
GJB 2030A-2021 Test method for high temperature fracture toughness of metallic materials
GJB 2709-1996 Test method for low temperature gas permeability coefficient of organic materials
GJB 2030-1994 JIC test method for fracture toughness of metal materials at high temperatures

KR-KS, High and low temperature test plastic

KS R 9213-2007(2017)(英文版) Railway rolling stock－High and low temperature test methods of parts
KS M ISO 4672-2008 Rubber and plastics hoses－Sub-ambient temperature flexibility tests
KS M ISO 7682-2019 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Acrylonitrile-butadiene-styrene(ABS)

Guangdong Provincial Standard of the People's Republic of China, High and low temperature test plastic

DB44/T 130-2003 Ordinary plastic film greenhouse test methods
DB44/T 1894-2016 Test method for high and low temperature weather resistance of LED street lamps and tunnel lamps

ZA-SANS, High and low temperature test plastic

SANS 8770:2008 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polyethylene (PE)
SANS 7675:2004 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Chlorinated poly(vinyl chloride) (PVC-C)
SANS 7682:2006 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Acrylonitrile-butadiene-styrene (ABS)

ES-UNE, High and low temperature test plastic

UNE-EN ISO 10619-3:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011)
UNE-EN ISO 6892-3:2015 Metallic materials - Tensile testing - Part 3: Method of test at low temperature (ISO 6892-3:2015)

Electronic Components, Assemblies and Materials Association, High and low temperature test plastic

ECA EIA-364-105-1999 TP-105 Altitude - Low Temperature Test Procedure for Electrical Connectors

国家质量监督检验检疫总局, High and low temperature test plastic

SN/T 2816-2011 Test method for total migration of polymeric materials for exported food contact materials at low temperatures

VN-TCVN, High and low temperature test plastic

TCVN 5886-2006 Metallic materials.Tensile testing at elevated temperature

NZ-SNZ, High and low temperature test plastic

AS/NZS 4401:2006 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings-Polyethylene (PE)

BE-NBN, High and low temperature test plastic

NBN-EN 24672-1993 Rubber and plastics hoses. Sub-ambiant temperature flexibility tests (ISO 4672:1988)
NBN-ISO 1432:1990 Rubber, vulcanized or thermoplastic - Determination of low temperature stiffening (Gehman test)
NBN-EN 10002-5-1992 Metallic materials - Tensile testing - Part 5 : Method of testing at elevated temperature

GM Daewoo, High and low temperature test plastic

GMKOREA EDS-T-7526-2010
GMKOREA EDS-T-7605-2011 Test Method for Determining the Low Temperature Resistance of Automotive Trim Materials

PT-IPQ, High and low temperature test plastic

NP EN 1876-1-2000 Rubber-or plastics-coated fabrics Low temperature tests Part 1:Bending test
NP EN 1876-2-2000 Rubber-or plastics-coated fabrics Low temperature tests Part 2:Impact test on loop
NP 2302-1986

未注明发布机构, High and low temperature test plastic

BS EN 2002-2:2005(2010) Metallic materials — Test methods — Part 2 : Tensile testing at elevated temperature

Professional Standard - Ferrous Metallurgy, High and low temperature test plastic

YB/T 2208-1998 Test method for crushing strength of castable refractory at elevated temperature

ES-AENOR, High and low temperature test plastic

UNE 53-216-1991

Association of German Mechanical Engineers, High and low temperature test plastic

DVS 2203-2 Beiblatt 1-2010 Testing of welded joints between panels and pipes made of thermoplastics - Low-temperature tensile test

NL-NEN, High and low temperature test plastic

NEN-ISO 4672:1993 Rubber and plastics hoses. Sub-ambient temperature flexibility tests (ISO 4672:1988)

RO-ASRO, High and low temperature test plastic

STAS SR EN 10002-5-1995 Metaliic materials. Tensile testing. Part 5: Method of testing at elevated temperatura

TR-TSE, High and low temperature test plastic

TS 2293-1976 P L A STIC S METHOD OF TEST FOR HIGH - VOLTAGE - LOW CURRENT DRY ARC RESISTANCE OF SOLID ELECTRICAL INSULATION

IN-BIS, High and low temperature test plastic

IS 4713-1968