ZH
RU
ES
Ultra-Low Emission Testing Method
Ultra-Low Emission Testing Method, Total:103 items.
In the international standard classification, Ultra-Low Emission Testing Method involves: Road engineering, Electricity. Magnetism. Electrical and magnetic measurements, Iron and steel products, Environmental protection, Air quality, Testing of metals, Measurement of fluid flow, Motor cycles and mopeds, Road vehicles in general, Terminology (principles and coordination), Vocabularies, Diagnostic, maintenance and test equipment, Internal combustion engines for road vehicles, Water quality, Organic chemicals, Domestic, commercial and industrial heating appliances, Wastes, Safety of machinery, Adhesives, Internal combustion engines, General methods of tests and analysis for food products, Acoustics and acoustic measurements.
Group Standards of the People's Republic of China, Ultra-Low Emission Testing Method
- T/SMHTA 004-2023 DetectionMethod for Asphalt Gas Emission
- T/GDCKCJH 063-2022 Performance requirements and testing methods for ultra-low frequency withstand voltage testers
- T/CSTM 00422-2022 Non-destructive testing — B-scan test method for low and medium frequency ultrasonic guided waves based on magnetostrictive effect
- T/HNAEPI 002-2021 Technical requirement and test method of on-line thallium monitor for pollutant discharge wastewater
Korean Agency for Technology and Standards (KATS), Ultra-Low Emission Testing Method
- KS D 0248-1994 Methods for ultrasonic examination for carbon and low alloy steel forgings
- KS D 0248-2014 Methods of ultrasonic examination for carbon and low alloy steel forgings
- KS R 1046-2001 Road vehicles &##8211; Measurement methods for exhaust gasemissions during inspection or maintenance
- KS R 1046-2001(2011) Road vehicles?Measurement methods for exhaust gasemissions during inspection or maintenance
- KS R ISO 3929-2006(2021) Road vehicles－Measurement methods for exhaust gas emissions during inspection or maintenance
- KS R ISO 3929-2006(2016) Road vehicles－Measurement methods for exhaust gas emissions during inspection or maintenance
- KS R ISO 3929:2006 Road vehicles－Measurement methods for exhaust gas emissions during inspection or maintenance
- KS I ISO 25140-2012(2017) Stationary source emissions－Automatic method for the determination of the methane concentration using flame ionization detection(FID)
- KS I ISO 25140:2022 Stationary source emissions — Automatic method for the determination of the methane concentration using flame ionization detection(FID)
- KS R ISO 14396:2006 Reciprocating internal combustion engines-Determination and method for the measurement of engine power-Additional requirements for exhaust emission tests in accordance with ISO 8178
Beijing Provincial Standard of the People's Republic of China, Ultra-Low Emission Testing Method
- DB11/ 318-2022 Emission limits and measurement methods of exhaust pollutants from in-use gasoline vehicles (remote sensing detection method)
- DB11/ 1476-2017 Rapid detection method and emission limit value of nitrogen oxides in heavy-duty vehicles
- DB11/ 183-2010 Smoke emission limits and measurement methods during deceleration of three-wheeled vehicles and low-speed trucks
- DB11/ 183-2006 Limits and measur methods for cxhaust smokc under lug-down test from in-use agricultural vehicles
Hubei Provincial Standard of the People's Republic of China, Ultra-Low Emission Testing Method
- DB42/T 1276-2017 Limits and detection methods of exhaust pollutants from in-use vehicles in Hubei Province (telemetry method)
Hebei Provincial Standard of the People's Republic of China, Ultra-Low Emission Testing Method
- DB13/T 2583-2017 Test method for exhaust gas emission from civil clean combustion stoves
CZ-CSN, Ultra-Low Emission Testing Method
Association of German Mechanical Engineers, Ultra-Low Emission Testing Method
- VDI 3862 Blatt 5-2008 Gaseous emission measurement - Measurement of lower aldehydes especially acrolein with the 2-HMP-method - GC-method
- VDI 2466 Blatt 2-2008 Gaseous emission measurement - Measurement of methane - Automatic method - Flame ionisation detector (FID)
British Standards Institution (BSI), Ultra-Low Emission Testing Method
- BS ISO 17479:2013 Motorcycles. Measurement methods for gaseous exhaust emissions during inspection or maintenance
- BS ISO 19449:2015 Mopeds. Measurement methods for gaseous exhaust emissions during inspection or maintenance
- BS ISO 17479:2013+A1:2020 Motorcycles. Measurement methods for gaseous exhaust emissions during inspection or maintenance
- BS ISO 3929:2003 Road vehicles. Measurement methods for exhaust gas emissions during inspection or maintenance
- 19/30392436 DC BS ISO 17479 AMD1. Motorcycles. Measurement methods for gaseous exhaust emissions during inspection or maintenance
- BS EN ISO 25140:2010 Stationary source emissions. Automatic method for the determination of the methane concentration using flame ionisation detection (FID)
- BS EN 13999-1:2013 Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application. General procedure
- BS EN 13999-3:2007 Adhesives — Short term
method for measuring
the emission properties
of low-solvent or
solvent-free adhesives
after application —
Part 3: Determination of volatile
aldehydes
- BS EN 13999-3:2007+A1:2009 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 3:Determination of volatile aldehydes
- BS EN 13999-2:2013 Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application. Determination of volatile organic compounds
- BS EN 13999-4:2007 Adhesives — Short term
method for measuring
the emission properties
of low-solvent or
solvent-free adhesives
after application —
Part 4: Determination of volatile
diisocyanates
- BS EN 13999-2:2007 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Determination of volatile organic compounds
- BS EN 13999-4:2007+A1:2009 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 4:Determination of volatile diisocyanates
- DD ENV 13999-1-2001 Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application. General procedure
- BS EN 13999-1:2006 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 1: General procedure
Danish Standards Foundation, Ultra-Low Emission Testing Method
- DS/ISO 17479:2013 Motorcycles - Measurement methods for gaseous exhaust emissions during inspection or maintenance
- DS/EN ISO 25140:2010 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID)
International Organization for Standardization (ISO), Ultra-Low Emission Testing Method
- ISO 17479:2013 Motorcycles - Measurement methods for gaseous exhaust emissions during inspection or maintenance
- ISO 17479:2013/Amd 1:2020 Motorcycles — Measurement methods for gaseous exhaust emissions during inspection or maintenance — Amendment 1
- ISO 3929:2003 Road vehicles - Measurement methods for exhaust gas emissions during inspection or maintenance
- ISO 3929:1995 Road vehicles - Measurement methods for exhaust gas emmissions during inspection or maintenance
- ISO 19449:2015 Mopeds — Measurement methods for gaseous exhaust emissions during inspection or maintenance
- ISO 14396:2002 Reciprocating internal combustion engines - Determination and method for the measurement of engine power - Additional requirements for exhaust emission tests in accordance with ISO 8178
- ISO/CD 7102 | IDF 257 Infant formula and adult nutritionals — Determination of β-galactooligosaccharides — Ultra high performance liquid chromatography (UHPLC) with fluorescence detection after pre-column derivatization
Association Francaise de Normalisation, Ultra-Low Emission Testing Method
- NF ISO 3929:2004 Véhicules routiers - Méthodes de mesure des émissions gazeuses au cours des inspections ou de la maintenance
- NF EN ISO 25140:2010 Émissions de sources fixes - Méthode automatique pour la détermination de la concentration en méthane par détection à ionisation de flamme (FID)
- NF R10-018*NF ISO 3929:2004 Road vehicles - Measurement methods for exhaust gas emissions during inspection or maintenance
- NF R10-018:1996 Road vehicles. Measurement procedures for exhaust gas emissions during inspection or maintenance.
- NF R10-019:1996 Road vehicles. Measurement equipment for exhaust gas emissions during inspection or maintenance. Technical specifications.
- NF X43-353*NF EN ISO 25140:2010 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID).
- NF E09-080-2:2008 Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 2 : methodology leading to verification procedures.
- NF T76-140-1:2006 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 1 : general procedure.
- NF T76-140-1*NF EN 13999-1:2014 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 1 : general procedure
- NF T76-140-3*NF EN 13999-3+A1:2009 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 3 : determination of volatile aldehydes.
- NF T76-140-3/IN1*NF EN 13999-3/IN1:2009 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 3 : determination of volatile aldehydes
- NF T76-140-2:2007 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 2 : determination of volatile organic compounds.
- NF T76-140-2*NF EN 13999-2:2014 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 2 : determination of volatile organic compounds
- NF T76-140-4*NF EN 13999-4+A1:2009 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 4 : determination of volatile diisocyanates.
- NF T76-140-4/IN1*NF EN 13999-4/IN1:2009 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 4 : determination of volatile diisocyanates.
HU-MSZT, Ultra-Low Emission Testing Method
Professional Standard - Environmental Protection, Ultra-Low Emission Testing Method
- HJ/T 76-2001 Specifications and test procedures for continuous emission monitoring systems of flue gas emitted from stationary sources
- HJ/T 76-2007 Specifications and test procedures for continuous emission monitoring systems of flue gas emitted from stationary sources (on trial)
- HJ 76-2017 Technical requirements and detection methods of continuous monitoring system for flue gas (SO2, NOx, particulate matter) emissions from stationary pollution sources
VN-TCVN, Ultra-Low Emission Testing Method
- TCVN 6204-2008 Road vehicles.Measurement methods for exhaust gas emissions during inspection or maintenance
German Institute for Standardization, Ultra-Low Emission Testing Method
- DIN 38402-6:1991 German standard methods for the examination of water, waste water and sludge; general information (group A); assessment of the minimum frequency for controlling water constituents in discharges (emission strategy) (A 6)
- DIN EN ISO 25140:2010-12 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID) (ISO 25140:2010); German version EN ISO 25140:2010
- DIN EN 13999-3:2007 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 3: Determination of volatile aldehydes; German version EN 13999-3:2007
- DIN EN 13999-4:2007 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 4: Determination of volatile diisocyanates; German version EN 13999-4:2007
- DIN EN 13999-2:2007 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 2: Determination of volatile organic compounds; German version EN 13999-2:2007
RU-GOST R, Ultra-Low Emission Testing Method
- GOST R ISO 25140-2017 Stationary source emissions. Automatic method for the determination of the methane concentration using flame ionisation detection
- GOST R 51832-2001 Internal combustion direct ignition petrol engines and road vehicles of total mass exceeding 3,5 t completed with those engines. Emission of pollutants. Technical requirements and test methods
TH-TISI, Ultra-Low Emission Testing Method
- TIS 1727-1998 Road vehicles.measurement methods for exhaust gas emissions during inspection or maintenace
KR-KS, Ultra-Low Emission Testing Method
- KS I ISO 25140-2022 Stationary source emissions — Automatic method for the determination of the methane concentration using flame ionization detection(FID)
Lithuanian Standards Office , Ultra-Low Emission Testing Method
- LST ISO 3929:2004 Road vehicles - Measurement methods for exhaust gas emissions during inspection or maintenance (idt ISO 3929:2003)
- LST EN ISO 25140:2010 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID) (ISO 25140:2010)
- LST EN 12619-2000 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon at low concentrations in flue gases - Continuous flame ionisation detector method
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Ultra-Low Emission Testing Method
- GB 19756-2005 Limits and measurement methods for exhaust pollutants from diesel engines of tri - wheel & low - speed goods vehicles
American Society for Testing and Materials (ASTM), Ultra-Low Emission Testing Method
- ASTM E2558-07 Standard Test Method for Determining Particulate Matter Emissions from Fires in Low Mass Wood-Burning Fireplaces
- ASTM D7184-12 Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection
- ASTM D7184-13 Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection
- ASTM E2558-07e1 Standard Test Method for Determining Particulate Matter Emissions from Fires in Low Mass Wood-Burning Fireplaces
- ASTM E2558-09 Standard Test Method for Determining Particulate Matter Emissions from Fires in Low Mass Wood-Burning Fireplaces
- ASTM D7184-15(2019)e1 Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection
- ASTM D7184-19 Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection
- ASTM D7184-15 Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection
- ASTM D7184-20 Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection
Hunan Provincial Standard of the People's Republic of China, Ultra-Low Emission Testing Method
- DB43/T 2315-2022 Performance testing method of digital atmospheric pressure temperature and humidity comprehensive instrument for motor vehicle pollutant emission measurement
AENOR, Ultra-Low Emission Testing Method
- UNE-EN ISO 25140:2011 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID) (ISO 25140:2010)
Indonesia Standards, Ultra-Low Emission Testing Method
- SNI 19-7117.8-2005 Exhaust gas emissions - Stationary sources - Part 8: Test methods of hydrogen chloride (HCl) content by mercury thiocyanate using spectrophotometers
- SNI 19-7117.10-2005 Exhaust gas emissions - Stationary sources - Part 10: Test methods of CO, CO2 and O2 concentration using automatic analysis instrumentation
European Committee for Standardization (CEN), Ultra-Low Emission Testing Method
- EN 12619:1999 Stationary Source Emissions - Determination of the Mass Concentration of Total Gaseous Organic Carbon at Low Concentrations in Flue Gases - Continuous Flame Ionization Detector Method
- EN ISO 16911-1:2013 Stationary source emissions - Manual and automatic determination of velocity and volume flow rate in ducts - Part 1: Manual reference method
- EN 13999-3:2007+A1:2009 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 3: Determination of volatile aldehydes
- EN 12619:2013 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method [Superseded: CEN EN 13526]
- EN 13999-4:2007+A1:2009 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 4: Determination of volatile diisocyanates
- EN 13999-3:2007 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 3: Determination of volatile aldehydes (Incorporates Amendment A1: 2009)
Institute of Electrical and Electronics Engineers (IEEE), Ultra-Low Emission Testing Method
- IEEE Std C63.4-2009 American National Standard for Methods of Measurement of Radio- Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz
- IEEE Std C63.4-2014 American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz