ZH
RU
ES

Ultra-low emission testing

Ultra-low emission testing, Total:194 items.

In the international standard classification, Ultra-low emission testing involves: Environmental protection, Air quality, Software development and system documentation, ENVIRONMENT. HEALTH PROTECTION. SAFETY, Acoustics and acoustic measurements, Fluid storage devices, Valves, Non-destructive testing, Testing of metals, Motor cycles and mopeds, Water quality, Road vehicles in general, Wastes, Radiation measurements, Diagnostic, maintenance and test equipment, Internal combustion engines for road vehicles, Domestic, commercial and industrial heating appliances, Radiation protection, Safety of machinery, Electrical wires and cables, Adhesives, Organic chemicals, Protection against dangerous goods, Internal combustion engines, Occupational safety. Industrial hygiene.

Group Standards of the People's Republic of China, Ultra-low emission testing

T/SDJHXH 001-2022 Coking Industry Ultra-Low Emission Assessment and Monitoring Technical Guidelines
T/JSEE 019-2020 Coal-fired power plant ultra-low emission monitoring system integration technical guidelines
T/CSTM 00423-2022 Non-destructive testing — Characterization and verification of low and medium frequency ultrasonic guided wave testing equipment based on magnetostrictive effect

AT-ON, Ultra-low emission testing

OENORM M 9421-2021 Handling of the results of emission measurements below the limit of quantification and detection
ONORM M 7455-1990 Fan-assisted gas burners with low NOx-emission; nitrogen oxide measurement

Hebei Provincial Standard of the People's Republic of China, Ultra-low emission testing

DB13/T 2782-2018 General Technical Specifications for Delayed Continuous Monitoring System of Ultra-low Emission Stationary Pollution Sources

CZ-CSN, Ultra-low emission testing

CSN IEC 761-6:1993 Equipment for continuously monitoring radioactivity in gaseous effluents. Part 6: Specific requirements for transuranic aerosol effluent monitors
CSN IEC 60761-2 ZZ1:2005
CSN 34 7470-13 ZZ1-2000
CSN 36 7117-2 ZZ1-2001
CSN 83 4741-1984 Air pollution prevention. Emission measurement of organic compounds. FID method for continuous measurement of the sum of hydrocarbons.

Society of Automotive Engineers (SAE), Ultra-low emission testing

SAE J2889-1-2011 Measurement of Minimum Noise Emitted by Road Vehicles

SAE - SAE International, Ultra-low emission testing

SAE J2889-1-2014 Measurement of Minimum Noise Emitted by Road Vehicles

German Institute for Standardization, Ultra-low emission testing

DIN EN 13648-3:2003 Cryogenic vessels - Safety devices for protection against excessive pressure - Part 3: Determination of required discharge; Capacity and sizing; German version EN 13648-3:2002
DIN 38402-6:1991 German standard methods for the examination of water, waste water and sludge; general information (group A); assessment of the minimum frequency for controlling water constituents in discharges (emission strategy) (A 6)
DIN EN 13284-1:2018-02 Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method; German version EN 13284-1:2017
DIN EN ISO 23210:2009-12 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009); German version EN ISO 23210:2009
DIN EN 13284-2:2018 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Quality assurance of automated measuring systems
DIN EN 13284-2:2018-02 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Quality assurance of automated measuring systems; German version EN 13284-2:2017 / Note: Applies in conjunction with DIN EN 14181 (2015-02).
DIN EN ISO 25140:2010-12 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID) (ISO 25140:2010); German version EN ISO 25140:2010
DIN EN 12619:2013-04 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method; German version EN 12619:2013
DIN EN 14584:2013 Non-destructive testing - Acoustic emission testing - Examination of metallic pressure equipment during proof testing - Planar location of AE sources; German version EN 14584:2013
DIN EN 13999-3:2007 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 3: Determination of volatile aldehydes; German version EN 13999-3:2007
DIN EN 60761-2:2005 Equipment for continuous monitoring radioactivity in gaseous effluents - Part 2: Specific requirements for aerosols monitors including transuranic aerosols (IEC 60761-2:2002, modified); German version EN 60761-2:2004

HU-MSZT, Ultra-low emission testing

API - American Petroleum Institute, Ultra-low emission testing

API 4109-1971 EVALUATION OF INSTRUMENTS FOR VEHICLE EXHAUST EMISSION INSPECTION
API 4238- STUDY OF ULTRASONIC VORTEX EFFECT AND TRACER GAS METHOD ON MEASUREMENT OF AUTOMOTIVE MASS EMISSIONS
API SMART LEAK-2004 Smart Leak Detection and Repair (LDAR) for Control of Fugitive Emissions

ECMA - European Association for Standardizing Information and Communication Systems, Ultra-low emission testing

328-2001 Detection and Measurement of Chemical Emissions from Electronic Equipment

VN-TCVN, Ultra-low emission testing

TCVN 5879-2009 Non-destructive testing.Aids to visual inspection.Selection of low-power magnifiers
TCVN 6204-2008 Road vehicles.Measurement methods for exhaust gas emissions during inspection or maintenance

YU-JUS, Ultra-low emission testing

JUS C.A7.092-1985 Non destructive testing. Aids to visual inspection. Selection of low-power magnifiers

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Ultra-low emission testing

GB/T 20968-2007 Non-destructive testing.Aids to visual inspection.Selection of low-power magnifiers
GB/T 7165.6-1989 Equipment for continuously monitoring radioactivity in gaseous effluents--Part 6: Specific requirements for transuranic aerosol effluent monitors
GB/T 7165.2-2008 Equipment for continuous monitoring of radioactivity in gaseous effluents.Part 2:Specific requirements for radioactive aerosol monitors including transuranic aerosols

Korean Agency for Technology and Standards (KATS), Ultra-low emission testing

KS B ISO 3058-2001(2021) Non-destructive testing－Aids to visual inspection－Selection of low-power magnifiers
KS B ISO 3058-2001(2016) Non-destructive testing－Aids to visual inspection－Selection of low-power magnifiers
KS B ISO 3058:2022 Non-destructive testing — Aids to visual inspection —Selection of low-power magnifiers
KS R 1046-2001(2011) Road vehicles?Measurement methods for exhaust gasemissions during inspection or maintenance
KS R ISO 3929-2006(2021) Road vehicles－Measurement methods for exhaust gas emissions during inspection or maintenance
KS R ISO 3929-2006(2016) Road vehicles－Measurement methods for exhaust gas emissions during inspection or maintenance
KS R ISO 3929:2006 Road vehicles－Measurement methods for exhaust gas emissions during inspection or maintenance
KS I ISO 25140-2012(2017) Stationary source emissions－Automatic method for the determination of the methane concentration using flame ionization detection(FID)
KS I ISO 23210:2012 Stationary source emissions－Determination of PM10/PM2.5 mass concentration in flue gas－Measurement at low concentrations by use of impactors
KS I ISO 12141:2017 Stationary source emissions－Determination of mass concentration of particulate matter(dust) at low concentrations－Manual gravimetric method
KS I ISO 12141:2022 Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method
KS I ISO 25140:2022 Stationary source emissions — Automatic method for the determination of the methane concentration using flame ionization detection(FID)
KS I ISO 23210:2022 Stationary source emissions — Determination of PM10/PM2.5 mass concentration in flue gas — Measurement at low concentrations by use of impactors
KS I ISO 23210:2017 Stationary source emissions－Determination of PM10/PM2.5 mass concentration in flue gas－Measurement at low concentrations by use of impactors
KS I ISO 12141:2007 Stationary source emissions－Determination of mass concentration of particulate matter(dust) at low concentrations－Manual gravimetric method
KS R ISO 14396:2006 Reciprocating internal combustion engines-Determination and method for the measurement of engine power-Additional requirements for exhaust emission tests in accordance with ISO 8178

AENOR, Ultra-low emission testing

UNE 36455:1982 LONGITUDINAL-BEAM ULTRASONIC INSPECTION OF NON ALLOY AND LOW-ALLOY STEEL CASTING
UNE-ISO 12141:2006 Stationary source emissions -- Determination of mass concentration of particulate matter (dust) at low concentrations -- Manual gravimetric method (ISO 12141:2002)
UNE-EN 12619:2013 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method
UNE-EN ISO 25140:2011 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID) (ISO 25140:2010)
UNE-EN ISO 23210:2010 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009)
UNE-EN 50525-3-21:2012 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) - Part 3-21: Cables with special fire performance - Flexible cables with halogen-free crosslinked insulation, and low emission of smoke
UNE-EN 50525-3-11:2012 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) - Part 3-11: Cables with special fire performance - Flexible cables with halogen-free thermoplastic insulation, and low emission of smoke

未注明发布机构, Ultra-low emission testing

BS ISO 3058:1998(1999) Non - destructive testing — Aids to visual inspection — Selection of low - power magnifiers

British Standards Institution (BSI), Ultra-low emission testing

BS ISO 17479:2013 Motorcycles. Measurement methods for gaseous exhaust emissions during inspection or maintenance
BS ISO 19449:2015 Mopeds. Measurement methods for gaseous exhaust emissions during inspection or maintenance
BS EN 13284-2:2005 Stationary source emissions - Determination of low range mass concentration of dust - Automated measuring systems
BS EN 13284-2:2004 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Automated measuring systems
BS ISO 17479:2013+A1:2020 Motorcycles. Measurement methods for gaseous exhaust emissions during inspection or maintenance
BS EN 13648-3:2002 Cryogenic vessels. Safety devices for protection against excessive pressure. Determination of required discharge. Capacity and sizing
BS EN 13648-3:2002(2008) Cryogenic vessels. Safety devices for protection against excessive pressure. Determination of required discharge. Capacity and sizing
BS ISO 3058:1998 Non-destructive testing - Aids to visual inspection - Selection of low-power magnifiers
BS ISO 3929:2003 Road vehicles. Measurement methods for exhaust gas emissions during inspection or maintenance
BS EN 13284-1:2017 Tracked Changes. Stationary source emissions. Determination of low range mass concentration of dust. Manual gravimetric method
19/30392436 DC BS ISO 17479 AMD1. Motorcycles. Measurement methods for gaseous exhaust emissions during inspection or maintenance
BS EN ISO 23210:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors
BS EN 13284-2:2017 Tracked Changes. Stationary source emissions. Determination of low range mass concentration of dust. Quality assurance of automated measuring systems
BS EN 12619:2013 Stationary source emissions. Determination of the mass concentration of total gaseous organic carbon. Continuous flame ionisation detector method
BS EN ISO 25140:2010 Stationary source emissions. Automatic method for the determination of the methane concentration using flame ionisation detection (FID)
BS EN 13999-3:2007 Adhesives — Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application — Part 3: Determination of volatile aldehydes
BS EN 13999-3:2007+A1:2009 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 3:Determination of volatile aldehydes
BS ISO 12141:2002 Stationary source emissions. Determination of mass concentration of particulate matter (dust) at low concentrations. Manual gravimetric method
BS EN 13999-1:2013 Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application. General procedure
BS ISO 21029-1:2018+A1:2019 Cryogenic vessels. Transportable vacuum insulated vessels of not more than 1 000 litres volume - Design, fabrication, inspection and tests
BS EN 13999-2:2013 Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application. Determination of volatile organic compounds
BS EN 13999-4:2007 Adhesives — Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application — Part 4: Determination of volatile diisocyanates
BS EN 13999-2:2007 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Determination of volatile organic compounds
BS EN 13999-4:2007+A1:2009 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 4:Determination of volatile diisocyanates
DD ENV 13999-1-2001 Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application. General procedure

KR-KS, Ultra-low emission testing

KS B ISO 3058-2022 Non-destructive testing — Aids to visual inspection —Selection of low-power magnifiers
KS I ISO 12141-2017 Stationary source emissions－Determination of mass concentration of particulate matter(dust) at low concentrations－Manual gravimetric method
KS I ISO 23210-2017 Stationary source emissions－Determination of PM10/PM2.5 mass concentration in flue gas－Measurement at low concentrations by use of impactors
KS I ISO 12141-2022 Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method
KS I ISO 25140-2022 Stationary source emissions — Automatic method for the determination of the methane concentration using flame ionization detection(FID)
KS I ISO 23210-2022 Stationary source emissions — Determination of PM10/PM2.5 mass concentration in flue gas — Measurement at low concentrations by use of impactors

Danish Standards Foundation, Ultra-low emission testing

DS/ISO 17479:2013 Motorcycles - Measurement methods for gaseous exhaust emissions during inspection or maintenance
DS/EN 13284-2:2005 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Automated measuring systems
DS/EN 13284-1:2002 Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method
DS/EN ISO 25140:2010 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID)
DS/EN ISO 23210:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors
DS/EN 12619:2013 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method
DS/EN 50525-3-11:2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 3-11: Cables with special fire performance - Flexible cables with halogen-free thermoplastic insulation, and low emission of smoke
DS/EN 50525-3-21:2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 3-21: Cables with special fire performance - Flexible cables with halogen-free crosslinked insulation, and low emission of smoke

International Organization for Standardization (ISO), Ultra-low emission testing

ISO 17479:2013 Motorcycles - Measurement methods for gaseous exhaust emissions during inspection or maintenance
ISO/DIS 12141:2023 Stationary source emissions - Determination of low range mass concentration of dust - Manual gravimetric method
ISO/CD 12141 Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method
ISO 17479:2013/Amd 1:2020 Motorcycles — Measurement methods for gaseous exhaust emissions during inspection or maintenance — Amendment 1
ISO 3929:2003 Road vehicles - Measurement methods for exhaust gas emissions during inspection or maintenance
ISO 3929:1995 Road vehicles - Measurement methods for exhaust gas emmissions during inspection or maintenance
ISO 19449:2015 Mopeds — Measurement methods for gaseous exhaust emissions during inspection or maintenance
ISO 23210:2009 Stationary source emissions - Determination of PM<(Index)10>/PM<(Index)2,5> mass concentration in flue gas - Measurement at low concentrations by use of impactors
ISO 12141:2002 Stationary source emissions - Determination of mass concentration of particulate matter (dust) at low concentrations - Manual gravimetric method
ISO 14396:2002 Reciprocating internal combustion engines - Determination and method for the measurement of engine power - Additional requirements for exhaust emission tests in accordance with ISO 8178

Association Francaise de Normalisation, Ultra-low emission testing

NF ISO 3929:2004 Véhicules routiers - Méthodes de mesure des émissions gazeuses au cours des inspections ou de la maintenance
NF EN ISO 20088-3:2019 Détermination de la résistance des matériaux d'isolation thermique suite à un refroidissement cryogénique - Partie 3 : émission sous forme de jet
NF EN 13284-1:2017 Émissions de sources fixes - Détermination de faibles concentrations en masse de poussières - Partie 1 : méthode gravimétrique manuelle
NF EN ISO 25140:2010 Émissions de sources fixes - Méthode automatique pour la détermination de la concentration en méthane par détection à ionisation de flamme (FID)
NF R10-018*NF ISO 3929:2004 Road vehicles - Measurement methods for exhaust gas emissions during inspection or maintenance
NF R10-018:1996 Road vehicles. Measurement procedures for exhaust gas emissions during inspection or maintenance.
NF EN 13284-2:2017 Émissions de sources fixes - Détermination de faibles concentrations en masse de poussières - Partie 2 : assurance qualité des systèmes de mesurage automatisés
NF X43-333-1*NF EN 13284-1:2017 Stationary source emissions - Determination of low range mass concentration of dust - Part 1 : Manual gravimetric method
NF EN ISO 23210:2009 Émissions de sources fixes - Détermination de la concentration en masse de PM10/PM2,5 dans les effluents gazeux - Mesurage à des faibles concentrations au moyen d'impacteurs
NF E09-080-2:2008 Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 2 : methodology leading to verification procedures.
NF EN 12619:2013 Émissions de sources fixes - Détermination de la concentration massique en carbone organique total - Méthode du détecteur continu à ionisation de flamme
NF X43-333-2*NF EN 13284-2:2017 Stationary source emissions - Determination of low range mass concentration of dust - Part 2 : quality assurance of automated measuring systems
NF R10-019:1996 Road vehicles. Measurement equipment for exhaust gas emissions during inspection or maintenance. Technical specifications.
NF X43-353*NF EN ISO 25140:2010 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID).
NF F37-040:1977 Railway transport equipment. Tank wagons for carrying liquified gases under pressure and having bottom filling and emptying devices. Maximum service pressure 40 bars. Air orifice for gauging, degassing and testing.
NF T76-140-3*NF EN 13999-3+A1:2009 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 3 : determination of volatile aldehydes.
NF X43-710:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Part 1 : measurement at low concentrations by use of impactors.
NF T76-140-3/IN1*NF EN 13999-3/IN1:2009 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 3 : determination of volatile aldehydes
NF T76-140-1*NF EN 13999-1:2014 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 1 : general procedure

Lithuanian Standards Office , Ultra-low emission testing

LST EN 12619-2000 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon at low concentrations in flue gases - Continuous flame ionisation detector method
LST EN 13284-2-2004 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Automated measuring systems
LST EN 13284-1-2002 Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method
LST ISO 3929:2004 Road vehicles - Measurement methods for exhaust gas emissions during inspection or maintenance (idt ISO 3929:2003)
LST EN ISO 25140:2010 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID) (ISO 25140:2010)
LST EN ISO 23210:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009)
LST EN 50525-3-21-2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) -- Part 3-21: Cables with special fire performance - Flexible cables with halogen-free crosslinked insulation, and low emission of smoke
LST EN 50525-3-11-2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) -- Part 3-11: Cables with special fire performance - Flexible cables with halogen-free thermoplastic insulation, and low emission of smoke
LST EN 50525-3-41-2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) -- Part 3-41: Cables with special fire performance - Single core non-sheathed cables with halogen-free crosslinked insulation, and low emission of smoke
LST EN 50525-3-31-2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) -- Part 3-31: Cables with special fire performance - Single core non-sheathed cables with halogen-free thermoplastic insulation, and low emission of smoke

Association of German Mechanical Engineers, Ultra-low emission testing

VDI 3863 Blatt 2-1991 Gaseous emission measurement; determination of acrylonitrile; gas chromatographic method; sampling by absorption in low temperature solvents
VDI 3860 Blatt 3-2011 Measurement of landfill gas - Measurement of surface emissions using the flame ionisation detector (FID)
VDI 3481 Blatt 4-2007 Gaseous emission measurement - Measurement of the concentrations of total organic carbon and methane carbon using the flame ionisation detector (FID)
VDI 3481 Blatt 3-1995 Gaseous emission measurement - Determination of volatile organic compounds, especially solvents, flame ionization detector (FID)

IN-BIS, Ultra-low emission testing

IS 7666-1975

TR-TSE, Ultra-low emission testing

TS 2399-1976 NON - DESTRUCTIVE TESTING - A?DS TO VISUAL INSPECTION - SEUECTION OF LOW - POWER MAGNIFIERS

Professional Standard - Environmental Protection, Ultra-low emission testing

HJ 733-2014 Guideline for the determination of volatile organic compound leaks and uncovered liquid surface emissions

International Electrotechnical Commission (IEC), Ultra-low emission testing

IEC 60761-6:1991 Equipment for continuously monitoring radioactivity in gaseous effluents; part 6: specific requirements for transuranic aerosol effluent monitors

RU-GOST R, Ultra-low emission testing

GOST R ISO 25140-2017 Stationary source emissions. Automatic method for the determination of the methane concentration using flame ionisation detection

American Society for Testing and Materials (ASTM), Ultra-low emission testing

ASTM E2558-07e1 Standard Test Method for Determining Particulate Matter Emissions from Fires in Low Mass Wood-Burning Fireplaces
ASTM E2558-09 Standard Test Method for Determining Particulate Matter Emissions from Fires in Low Mass Wood-Burning Fireplaces
ASTM E2558-07 Standard Test Method for Determining Particulate Matter Emissions from Fires in Low Mass Wood-Burning Fireplaces
ASTM D7184-12 Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection
ASTM D7184-13 Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection
ASTM D7184-15(2019)e1 Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection
ASTM D7184-19 Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection
ASTM D7184-15 Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection
ASTM D7184-20 Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection

ES-UNE, Ultra-low emission testing

UNE 199142-3:2022 Road traffic management equipment. Artificial vision. Offending vehicles detection. Part 3: Functional requirements and application protocol for monitoring in Low Emission Zones and UVARs
UNE-EN 13284-1:2018 Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method
UNE-EN 13284-2:2018 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Quality assurance of automated measuring systems

TH-TISI, Ultra-low emission testing

TIS 1727-1998 Road vehicles.measurement methods for exhaust gas emissions during inspection or maintenace

SE-SIS, Ultra-low emission testing

SIS SS IEC 861:1989 Nuc/ear instrumentation — Equipment for continuously monitoring for beta and gamma emitting radionucleides in liquid effluents
SIS SS IEC 463:1983 Nuclear instrumentation - Low energy X or gamma radiation portable exposure r?te meters and monitors for use in radiological protection

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Ultra-low emission testing

IEEE C62.32-1981 Standard Test Specifications for Low-Voltage Air Gap Surge-Protective Devices (Excluding Valve and Expulsion Devices)

European Committee for Standardization (CEN), Ultra-low emission testing

EN 13284-2:2004 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Automated measuring systems
EN 13284-2:2017 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Quality assurance of automated measuring systems
EN 13284-1:2001 Stationary Source Emissions - Determination of Low Range Mass Concentration of Dust - Part 1: Manual Gravimetric Method
EN 13284-1:2017 Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method
EN 13526:2001 Stationary Source Emissions - Determination of the Mass Concentration of Total Gaseous Organic Carbon in Flue Gases From Solvent Using Processes - Continuous Flame Ionisation Detector Method
EN ISO 23210:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009)
EN 13999-3:2007+A1:2009 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 3: Determination of volatile aldehydes
EN 12619:1999 Stationary Source Emissions - Determination of the Mass Concentration of Total Gaseous Organic Carbon at Low Concentrations in Flue Gases - Continuous Flame Ionization Detector Method

CENELEC - European Committee for Electrotechnical Standardization, Ultra-low emission testing

EN 50525-3-21:2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 3-21: Cables with special fire performance - Flexible cables with halogen-free crosslinked insulation@ and low emission of smoke

US-CFR-file, Ultra-low emission testing

CFR 40-86.1370-2014 Protection of Environment. Part86:Control of emissions from new and in-use highway vehicles and engines. Section86.1370:Not-To-Exceed test procedures.

中华人民共和国国家卫生和计划生育委员会, Ultra-low emission testing

GBZ 178-2006 Specification for radiological protection and quality control in implanted treatment of low energy γ-ray seed sources

European Committee for Electrotechnical Standardization（CENELEC）, Ultra-low emission testing

EN 60761-2:2004 Equipment for continuous monitoring radioactivity in gaseous effluents Part 2: Specific requirements for aerosols monitors including transuranic aerosols

Beijing Provincial Standard of the People's Republic of China, Ultra-low emission testing

DB11/ 183-2006 Limits and measur methods for cxhaust smokc under lug-down test from in-use agricultural vehicles

VDI - Verein Deutscher Ingenieure, Ultra-low emission testing

VDI 4208 BLATT 2 BERICHTIGUNG-2019 Anforderungen an Stellen bei der Ueberwachung von Emissionen an Kleinfeuerungsanlagen - Stellen fuer wiederkehrende Ueberpruefungen von eignungsgeprueften Messgeraeten - Berichtigung zur Richtlinie VDI 2048 Blatt 2:2019-01