ZH
RU
ES

electron diffraction diffraction

electron diffraction diffraction, Total:500 items.

In the international standard classification, electron diffraction diffraction involves: Vocabularies, Analytical chemistry, Optical equipment, Optics and optical measurements, Radiocommunications, Testing of metals, Protection against fire, Optoelectronics. Laser equipment, Education, Non-ferrous metals, Refractories, Non-destructive testing, Particle size analysis. Sieving, Plastics, Radiation protection, Products of the chemical industry, Springs, Linear and angular measurements, Materials for the reinforcement of composites, Occupational safety. Industrial hygiene, Inorganic chemicals, Construction materials, Ceramics, Surface treatment and coating, Paints and varnishes, Production of metals, Semiconducting materials, Powder metallurgy, Iron and steel products, Fuels, Water quality, Non-metalliferous minerals, Rubber and plastics products, Power stations in general, Welding, brazing and soldering, Air quality, Paint ingredients, Pipeline components and pipelines, Organic chemicals, Hydraulic energy engineering, Edible oils and fats. Oilseeds, Electronic components in general.

United States Navy, electron diffraction diffraction

NAVY UFGS-01 33 29-2010 LEED(TM) DOCUMENTATION

International Organization for Standardization (ISO), electron diffraction diffraction

ISO/CD 23699 Microbeam Analysis — Electron Backscattered Electron Diffraction — Vocabulary
ISO 13067:2011 Microbeam analysis - Electron backscatter diffraction - Measurement of average grain size
ISO 15902:2004 Optics and photonics - Diffractive optics - Vocabulary
ISO 15902:2019 Optics and photonics — Diffractive optics — Vocabulary
ISO 23749:2022 Microbeam analysis — Electron backscatter diffraction — Quantitative determination of austenite in steel
ISO 13067:2020 Microbeam analysis — Electron backscatter diffraction — Measurement of average grain size
ISO 24173:2009 Microbeam analysis - Guidelines for orientation measurement using electron backscatter diffraction
ISO/DIS 24173:2023 Microbeam analysis — Guidelines for orientation measurement using electron backscatter diffraction
ISO/CD 25498:2023 Microbeam analysis — Analytical electron microscopy — Selected area electron diffraction analysis using a transmission electron microscope
ISO/TTA 3:2001 Polycrystalline materials - Determination of residual stresses by neutron diffraction
ISO 13320:2020 Particle size analysis — Laser diffraction methods
ISO/CD TS 5973 Good practice for laser diffraction measurements
ISO 13320:2009 Particle size analysis - Laser diffraction methods
ISO/CD TS 5973.2:2023 Good practice for laser diffraction measurements
ISO 15902:2004/cor 1:2005 Optics and photonics - Diffractive optics - Vocabulary; Technical Corrigendum 1
ISO 25498:2010 Microbeam analysis - Analytical electron microscopy - Selected-area electron diffraction analysis using a transmission electron microscope
ISO 25498:2018 Microbeam analysis - Analytical electron microscopy - Selected area electron diffraction analysis using a transmission electron microscope
ISO 23703:2022 Microbeam analysis — Guidelines for misorientation analysis to assess mechanical damage of austenitic stainless steel by electron backscatter diffraction (EBSD)
ISO/TS 21432:2005 Non-destructive testing - Standard test method for determining residual stresses by neutron diffraction
ISO 13320-1:1999 Particle size analysis - Laser diffraction methods - Part 1: General principles
ISO 21432:2019 Non-destructive testing — Standard test method for determining residual stresses by neutron diffraction
ISO 23071:2021 Refractory products — Determination of reduced species in carbon containing refractories by XRD
ISO/FDIS 10110-16 Optics and photonics — Preparation of drawings for optical elements and systems — Part 16: Diffractive surfaces
ISO 10110-16:2023 Optics and photonics — Preparation of drawings for optical elements and systems — Part 16: Diffractive surfaces
ISO 8130-13:2001 Coating powders - Part 13: Particle size analysis by laser diffraction
ISO 10863:2011 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD)
ISO 8130-13:2019 Coating powders — Part 13: Particle size analysis by laser diffraction
ISO 22262-3:2016 Air quality - Bulk materials - Part 3: Quantitative determination of asbestos by X-ray diffraction method
ISO/TS 21432:2005/cor 1:2008 Non-destructive testing - Standard test method for determining residual stresses by neutron diffraction; Technical Corrigendum 1
ISO 15626:2018 Non-destructive testing of welds - Time-of-flight diffraction technique (TOFD) - Acceptance levels
ISO 15626:2011 Non-destructive testing of welds - Time-of-flight diffraction technique (TOFD) - Acceptance levels
ISO/CD 6868:2023 Workplace Air — Quantitative determination of quartz and cristobalite in bulk materials by X-ray powder diffraction methods

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, electron diffraction diffraction

GB/T 19501-2004 General guide for electron backscatter diffraction analysis
GB/T 18907-2002 Method of selected area electron diffraction for transmission electron microscopes
GB/T 19501-2013 Microbeam analysis.General guide for electron backscatter diffraction analysis
GB/T 36165-2018 Determination of average grain size of metal.Electron backscatter diffraction (EBSD)method
GB/T 30703-2014 Microbeam analysis.Guidelines for orientation measurement using electron backscatter diffraction
GB/T 38532-2020 Microbeam analysis—Electron backscatter diffraction—Measurement of average grain size
GB/T 18907-2013 Microbeam analysis.Analytical electron microscopy.Selected-area electron diffraction analysis using a transmission electron microscope
GB/T 20724-2006 Method of thickness measurement for thin crystal by convergent beam electron diffraction
GB/T 19077.1-2003 Particle size analysis--Laser diffraction method
GB/T 19077-2016 Particle size analysis.Laser diffraction methods
GB 16355-1996 Radiation protection standards for X-ray diffraction and fluorescence analysis equipment
GB/T 26140-2023 Neutron Diffraction Method for Nondestructive Testing Residual Stress Measurement
GB/T 26140-2010 Non-destructive testing.Standards test method for determining residual stresses by neutron diffraction
GB/T 5225-1985 Metal materials--Quantitative phase analysis--"value K" method of x-ray diffraction
GB/T 30904-2014 Inorganic chemicals for industrial use.Crystal form analysis.X-ray diffraction method
GB/T 8360-1987 The lattice constant determination of metals--Method of X-ray diffractometer
GB/T 8362-1987 Retained austenite in steel--Quantitative determination--Method of X-ray diffractometer
GB/T 42676-2023 X-ray Diffraction Method for Testing the Quality of Semiconductor Single Crystal
GB/T 8359-1987 Carbides in high speed steel--Quantitative phase analysis--Method of X-ray diffractometer
GB/T 19077.1-2008 Particle size analysis.Laser diffraction methods.Part 1:General principles
GB/T 21782.13-2009 Coating powders.Part 13:Particle size analysis by laser diffraction
GB/T 23413-2009 Determination of crystallite size and micro-strain of nano-materials.X-ray diffraction line broadening method
GB/T 30793-2014 Measuring ratio of anatase to rutile in titanium dioxide pigments by X-ray diffraction
GB/T 24576-2009 Test method for measuring the Al fraction in on AlGaAs substrates by high resolution X-ray diffraction
GB/T 23902-2009 Non-destructive testing.Ultrasonic examination.Time-of-flight diffraction technique as a method for detection and sizing of discontinuities

Professional Standard - Machinery, electron diffraction diffraction

JB/T 11144-2011 X-ray diffractometer
JB/T 9400-1999 Specification for X-ray diffractometer
JB/T 9400-2010 Specification of X-ray diffractometer
JB/T 8239.1-1999 Basic parameters for diffraction grating
JB/T 8239.2-1999 Specification for diffraction grating
JB/T 8426-1996 Metal coating. X-ray diffraction test method for nickel-phosphorus alloy coating

International Telecommunication Union (ITU), electron diffraction diffraction

ITU-R P.526-11-2009 Propagation by diffraction
ITU-R P.526-2013 Propagation by diffraction
ITU-R P.526-10-2007 Propagation by diffraction
ITU-R P.526-11 FRENCH-2009 Propagation by diffraction Propagation par diffraction
ITU-R P.526-11 SPANISH-2009 Propagation by diffraction Propagaci髇 por difracci髇

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, electron diffraction diffraction

ITU-R P.526-4-1995 Propagation by Diffraction
ITU-R P.526-12-2012 Propagation by diffraction
ITU-R P.526-5-1997 Propagation by Diffraction
ITU-R P.526-6-1999 Propagation by Diffraction
ITU-R P.526-2-1992 Propagation by Diffraction
ITU-R P.526-7-2001 Propagation by Diffraction
ITU-R P.526-14-2018 Propagation by diffraction
ITU-R P.526-9-2005 Propagation by diffraction
ITU-R P.526-3-1994 Propagation by Diffraction
ITU-R P.526-8-2003 Propagation by diffraction (Question ITU-R 202/3)
ITU-R P.526-1-1982 Propagation by Diffraction - Section 5B - Effects of the Ground (Including Ground-Wave Propagation)

工业和信息化部, electron diffraction diffraction

YB/T 4677-2018 Determination of Texture in Steel Electron Backscattered Diffraction (EBSD) Method
YS/T 1178-2017 Aluminum slag phase analysis X-ray diffraction method
YB/T 172-2020 Quantitative phase analysis of silica bricks by X-ray diffraction method
SH/T 1827-2019 Determination of crystallinity of plastics by X-ray diffraction method
YB/T 5338-2019 X-ray diffractometer method for quantitative determination of austenite in steel
YB/T 5360-2020 Determination of quantitative pole figures of metallic materials by X-ray diffraction method
HG/T 5705-2020 Determination of titanium dioxide phase content in hydrogenation catalysts by X-ray diffraction method
YS/T 1160-2016 Quantitative phase analysis of industrial silicon powder Determination of silica content X-ray diffraction K value method
HG/T 5595-2019 Determination of particle size distribution of olefin polymerization catalysts by laser diffraction method
JB/T 13935-2020 Non-destructive testing instrument ultrasonic detection ultrasonic diffraction sound time detector
YS/T 1344.3-2020 Chemical analysis method of tin-doped indium oxide powder Part 3: Phase analysis X-ray diffraction analysis method

PT-IPQ, electron diffraction diffraction

E E 14-1971

Professional Standard - Agriculture, electron diffraction diffraction

77药典四部-2015 0451 X-ray diffraction method
57药典四部-2020 0451 X-ray diffraction method
2355药典二部-2010 Appendix IX FX-Ray Powder Diffraction Method
784兽药典一部-2015 Appendix Contents 0400 Spectroscopy 0451 X-ray Diffraction
SN/T 5579-2023 Determination of degree of graphitization of carbon materials X-ray diffraction method
SN/T 5499-2023 Determination of Talc Content in Mineral Products X-ray Diffraction Full Spectrum Fitting Method
SN/T 3797-2014 Screening method for zirconia fibers in building refractory materials X-ray diffraction method
SN/T 3323.7-2023 Iron oxide scale - Part 7: Determination of free α-SiO2 content X-ray diffraction K value method

Shanghai Provincial Standard of the People's Republic of China, electron diffraction diffraction

DB31/T 1156-2019 Electron backscatter diffraction method for technical identification of electrical fire melt marks

Association Francaise de Normalisation, electron diffraction diffraction

NF ISO 24173:2009 Analyse par microfaisceaux - Lignes directrices pour la mesure d'orientation par diffraction d'électrons rétrodiffusés
NF X21-014:2012 Microbeam analysis - Electron backscatter diffraction - Measurement of average grain size.
NF S10-133*NF EN ISO 15902:2020 Optics and photonics - Diffractive optics - Vocabulary
NF EN ISO 15902:2020 Optique et photonique - Optique diffractive - Vocabulaire
NF X21-011*NF ISO 24173:2009 Microbeam analysis - Guidelines for orientation measurement using electron backscatter diffraction
NF A09-282:2019 Non-destructive testing - Phase quantification by X-ray diffraction
NF S10-133:2005 Optics and optical instruments - Diffractive optics - Vocabulary.
NF EN 15305:2009 Essais non-destructifs - Méthode d'essai pour l'analyse des contraintes résiduelles par diffraction des rayons X
NF X11-666:1984 PARTICLE SIZE ANALYSIS OF POWDERS. DIFFRACTION METHOD.
NF EN ISO 21432:2020 Essais non destructifs - Méthode normalisée de détermination des contraintes résiduelles par diffraction de neutrons
NF A09-610*NF EN ISO 21432:2020 Non-destructive testing - Standard test method for determining residual stresses by neutron diffraction
NF A09-185*NF EN 15305:2009 Non-destructive testing - Test Method for Residual Stress analysis by X-ray Diffraction.
NF T30-499-13*NF EN ISO 8130-13:2019 Coating powders - Part 13 : particle size analysis by laser diffraction
NF A09-280-3*NF EN 13925-3:2005 Non destructive testing - X-ray diffraction from polycrystalline and amorphous materials - Part 3 : instruments.
NF A09-280-2*NF EN 13925-2:2003 Non-destructive testing - X-ray diffraction from polycristalline and amorphous materials - Part 2 : procedures
NF T25-111-3:1991 Carbon fibres- Texture and structure- Part 3: Azimutal analysis of the diffraction of the X-rays
NF EN 1330-11:2007 Essais non destructifs - Terminologie - Partie 11 : diffraction des rayons X de matériaux polycristallins et amorphes
NF EN ISO 8130-13:2019 Poudres pour revêtement - Partie 13 : analyse granulométrique par diffraction laser
NF A09-285:1999 Non destructive testing - Test methods for residual stress analysis by X-ray diffraction
NF ISO 22262-3:2017 Qualité de l'air - Matériaux solides - Partie 3 : dosage quantitatif de l'amiante par la méthode de diffraction des rayons X
NF T25-111-6:1991 Carbon fibres- Texture and structure- Part 6: Analysis of the selected area diffraction
NF A09-280-1*NF EN 13925-1:2003 Non-destructive testing - X-ray diffraction from polycrystalline and amorphous material - Part 1 : general principles.
NF X43-066-3*NF ISO 22262-3:2017 Air quality - Bulk materials - Part 3 : quantitative determination of asbestos by X-ray diffraction method
NF EN 13925-2:2003 Essais non destructifs - Diffraction des rayons X appliquée aux matériaux polycristallins et amorphes - Partie 2 : procédures
NF EN 13925-3:2005 Essais non destructifs - Diffraction des rayons X appliquée aux matériaux polycristallins et amorphes - Partie 3 : appareillage
NF T30-499-13:2011 Coating powders - Part 13 : particle size analysis by laser diffraction.
NF T31-207:1995 Pigments and extenders. Titanium dioxide. Ratio of anatase to rutile by X-ray diffraction.
NF EN 13925-1:2003 Essais non destructifs - Diffraction des rayons X appliquée aux matériaux polycristallins et amorphes - Partie 1 : principes généraux
NF A89-516*NF EN ISO 15626:2018 Non-destructive testing of welds - Time-of-flight diffraction technique (TOFD) - Acceptance levels
NF A09-020-11*NF EN 1330-11:2007 Non-destructive testing - Terminology - Part 11 : Terms used in X-ray diffraction from polycrystalline and amorphous materials.
NF B49-422-2*NF EN 12698-2:2008 Chemical analysis of nitride bonded silicon carbide refractories - Part 2 : XRD methods.
NF A89-516:2013 Non-destructive testing of welds - Time-of-flight diffraction technique (TOFD) - Acceptance levels
NF A89-524:2011 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD).
NF A89-524*NF EN ISO 10863:2020 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD)

Korean Agency for Technology and Standards (KATS), electron diffraction diffraction

KS M 0043-2009 General rules for X-ray diffractometric analysis
KS B ISO 15902:2013 Optics and optical instruments ― DiffrN optics ― Vocabulary
KS B ISO 15902:2008 Optics and photonics-Diffractive optics-Vocabulary
KS B ISO 15902:2018 Optics and photonics — Diffractive optics — Vocabulary
KS M 0043-2009(2019) General rules for X-ray diffractometric analysis
KS A ISO 13320:2022 Particle size analysis — Laser diffraction methods
KS A ISO 13320-2014(2019) Particle size analysis — Laser diffraction methods
KS A ISO 13320:2014 Particle size analysis — Laser diffraction methods
KS B ISO TS 21432:2017 Non-destructive testing — Standard test method for determining residual stresses by neutron diffraction
KS B ISO 21432:2007 Non-destructive testing－Standard test method for determining residual stresses by neutron diffraction
KS A ISO 13320-1-2004(2009) Particle size analysis Laser diffraction methods - Part 1 General principles
KS B ISO TS 21432-2017(2022) Non-destructive testing — Standard test method for determining residual stresses by neutron diffraction
KS M ISO 8130-13:2008 Coating powders－Part 13：Particle size analysis by laser diffraction
KS B ISO 15626:2019 Non-destructive testing of welds — Time-of-flight diffraction technique(TOFD) — Acceptance levels
KS M ISO 8130-13:2019 Coating Powders — Part 13: Particle size analysis by laser diffraction
KS A ISO 13320-1:2004 Particle size analysis Laser diffraction methods - Part 1 General principles
KS B ISO 10863:2014 Non-destructive testing of welds — Use of time-of-flight diffraction technique(TOFD)
KS L 1614-2001(2016) Determination of particle size distributions for fine ceramic raw powders by laser diffraction method
KS A ISO 13320-1:2014 Particle size analysis Laser diffraction methods - Part 1 General principles
KS D 0287-2005(2020) Standard test method for determining the effective elastic parameter for X-ray diffraction measurements of residual stress
KS L 1614-2001 Determination of particle size distributions for fine ceramic raw powders by laser diffraction method
KS L 1614-2001(2021) Determination of particle size distributions for fine ceramic raw powders by laser diffraction method
KS B ISO 15626:2014 Non-destructive testing of welds — Time-of-flight diffraction technique(TOFD) — Acceptance levels
KS D 0287-2005 Standard test method for determining the effective elastic parameter for X-ray diffraction measurements of residual stress
KS M ISO 20203-2016(2021) Carbonaceous materials used in the production of aluminium－Calcined coke－Determination of crystallite size(Lc) of calcined petroleum coke by X-ray diffraction

IET - Institution of Engineering and Technology, electron diffraction diffraction

GEOMET THEO DIFF-1994 Geometrical Theory of Diffraction
THEO EDGE DIFF ELECTRO-2009 Theory of Edge Diffraction in Electromagnetics: Origination and validation of the physical theory of diffraction
GEOMET THEO DIFF ELECTRO WAV-1979 Geometrical Theory of Diffraction for Electromagnetic Waves
APRT ANT DIFF THEO-1981 Aperture Antennas and Diffraction Theory

German Institute for Standardization, electron diffraction diffraction

DIN ISO 13067:2021-08 Microbeam analysis - Electron backscatter diffraction - Measurement of average grain size (ISO 13067:2020)
DIN EN ISO 15902:2005 Optics and photonics - Diffractive optics - Vocabulary (ISO 15902:2004); German version EN ISO 15902:2005
DIN EN ISO 15902:2020-05 Optics and photonics - Diffractive optics - Vocabulary (ISO 15902:2019); German version EN ISO 15902:2020
DIN ISO 13067:2015 Microbeam analysis - Electron backscatter diffraction - Measurement of average grain size (ISO 13067:2011)
DIN ISO 24173:2013-04 Microbeam analysis - Guidelines for orientation measurement using electron backscatter diffraction (ISO 24713:2009)
DIN ISO 13067:2021 Microbeam analysis - Electron backscatter diffraction - Measurement of average grain size (ISO 13067:2020)
DIN ISO 13320:2022-12 Particle size analysis - Laser diffraction methods (ISO 13320:2020)
DIN EN ISO 15902:2020 Optics and photonics - Diffractive optics - Vocabulary (ISO 15902:2019)
DIN ISO 24173:2013 Microbeam analysis - Guidelines for orientation measurement using electron backscatter diffraction (ISO 24713:2009)
DIN ISO 13320:2022 Particle size analysis - Laser diffraction methods (ISO 13320:2020)
DIN EN 15305:2009-01 Non-destructive testing - Test method for residual stress analysis by X-ray diffraction; German version EN 15305:2008
DIN EN 15305 Berichtigung 1:2009-04 Non-destructive testing - Test method for residual stress analysis by X-ray diffraction; German version EN 15305:2008, Corrigendum to DIN EN 15305:2009-01; German version EN 15305:2008/AC:2009
DIN EN 15305:2009 Non-destructive testing - Test method for residual stress analysis by X-ray diffraction; German version EN 15305:2008
DIN EN ISO 8130-13:2019-08 Coating powders - Part 13: Particle size analysis by laser diffraction (ISO 8130-13:2019); German version EN ISO 8130-13:2019
DIN EN 13925-2:2003 Non-destructive testing - X-ray diffraction from polycristalline and amorphous material - Part 2: Procedures; German version EN 13925-2:2003
DIN EN 13925-1:2003 Non-destructive testing - X-ray diffraction from polycristalline and amorphous material - Part 1: General principles; German version EN 13925-1:2003
DIN EN 13925-3:2005 Non-destructive testing - X-ray diffraction from polycrystalline and amorphous materials - Part 3: Instruments; German version EN 13925-3:2005
DIN EN 13925-3:2005-07 Non-destructive testing - X-ray diffraction from polycrystalline and amorphous materials - Part 3: Instruments; German version EN 13925-3:2005
DIN EN 13925-2:2003-07 Non-destructive testing - X-ray diffraction from polycristalline and amorphous material - Part 2: Procedures; German version EN 13925-2:2003
DIN EN 13925-1:2003-07 Non-destructive testing - X-ray diffraction from polycristalline and amorphous material - Part 1: General principles; German version EN 13925-1:2003
DIN EN ISO 21432:2021-05 Non-destructive testing - Standard test method for determining residual stresses by neutron diffraction (ISO 21432:2019); German version EN ISO 21432:2020
DIN EN ISO 15626:2018-11 Non-destructive testing of welds - Time-of-flight diffraction technique (TOFD) - Acceptance levels (ISO 15626:2018); German version EN ISO 15626:2018
DIN EN 15305 Berichtigung 1:2009 Non-destructive testing - Test method for residual stress analysis by X-ray diffraction; German version EN 15305:2008, Corrigendum to DIN EN 15305:2009-01; German version EN 15305:2008/AC:2009
DIN EN 14107:2003-10 Fat and oil derivatives - Fatty acid methylesters (FAME) - Determination of phosphorus content by inductively coupled plasma (ICP) emission spectrometry; German version EN 14107:2003
DIN EN 12698-2:2007 Chemical analysis of nitride bonded silicon carbide refractories - Part 2: XRD methods English version of DIN EN 12698-2:2007-06
DIN EN 1330-11:2007-09 Non-destructive testing - Terminology - Part 11: Terms used in X-ray diffraction from polycristalline and amorphous materials; Trilingual version EN 1330-11:2007
DIN EN ISO 8130-13:2019 Coating powders - Part 13: Particle size analysis by laser diffraction (ISO 8130-13:2019)
DIN EN ISO 10863:2020-09 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD) (ISO 10863:2020); German version EN ISO 10863:2020
DIN EN ISO 15626:2018 Non-destructive testing of welds - Time-of-flight diffraction technique (TOFD) - Acceptance levels (ISO 15626:2018)
DIN EN 1330-11:2007 Non-destructive testing - Terminology - Part 11: Terms used in X-ray diffraction from polycristalline and amorphous materials; Trilingual version EN 1330-11:2007
DIN 50433-1:1976 Testing of semi-conducting inorganic materials; determining the orientation of single crystals by means of X-ray diffraction

Association of German Mechanical Engineers, electron diffraction diffraction

VDI/VDE 5575 Blatt 10-2015 X-ray optical systems - Diffraction gratings

CEN - European Committee for Standardization, electron diffraction diffraction

EN ISO 15902:2005 Optics and photonics - Diffractive optics - Vocabulary
EN ISO 8130-13:2019 Coating powders - Part 13: Particle size analysis by laser diffraction
PD CEN/TS 14751:2004 Welding - Use of time-of-flight diffraction technique (TOFD) for examination of welds
EN 15617:2009 Non-destructive testing of welds - Time-of-flight diffraction technique (TOFD) - Acceptance levels

European Committee for Standardization (CEN), electron diffraction diffraction

EN ISO 15902:2020 Optics and photonics - Diffractive optics - Vocabulary (ISO 15902:2019)
EN ISO 8130-13:2010 Coating powders - Part 13: Particle size analysis by laser diffraction (ISO 8130-13:2001)
EN ISO/TS 21432:2005 Non-destructive testing - Standards test method for determining residual stresses by neutron diffraction
EN 13925-2:2003 Non-destructive testing - X-ray diffraction from polycrystalline and amorphous materials - Part 2: Procedures
EN 13925-3:2005 Non destructive testing - X ray diffraction from polycrystalline and amorphous materials - Part 3: Instruments
EN ISO 15626:2013 Non-destructive testing of welds - Time-of-flight diffraction technique (TOFD) - Acceptance levels
EN ISO 15626:2018 Non-destructive testing of welds - Time-of-flight diffraction technique (TOFD) - Acceptance levels (ISO 15626:2018)
EN ISO 21432:2020 Non-destructive testing - Standard test method for determining residual stresses by neutron diffraction (ISO 21432:2019)
CEN ISO/TS 21432:2005 Non-destructive testing - Standards test method for determining residual stresses by neutron diffraction ISO 21432:2005
EN ISO 10863:2020 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD) (ISO 10863:2020)
EN ISO 10863:2011 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD) [Superseded: CEN CEN/TS 14751]
EN 12698-2:2007 Chemical analysis of nitride bonded silicon carbide refractories - Part 2: XRD methods
EN 1330-11:2007 Non-destructive testing - Terminology - Terms used in X-ray diffraction from polycrystalline and amorphous materials
EN 13925-1:2003 Non-destructive testing - X-ray diffraction from polycrystalline and amorphous materials - Part 1: General principles
CEN ISO/TS 21432/AC:2009 Non-destructive testing - Standards test method for determining residual stresses by neutron diffraction (ISO 21432:2005/Cor 1:2008)
EN 14107:2003 Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of phosphorus content by inductivity coupled plasma (ICP) emission spectrometry
EN 15305:2008 Non-destructive Testing - Test Method for Residual Stress analysis by X-ray Diffraction

Danish Standards Foundation, electron diffraction diffraction

DS/EN ISO 15902:2005 Optics and photonics - Diffractive optics - Vocabulary
DS/ISO 13320:2009 Particle size analysis - Laser diffraction methods
DS/EN 15305/AC:2009 Non-destructive Testing - Test Method for Residual Stress analysis by X-ray Diffraction
DS/EN 15305:2008 Non-destructive Testing - Test Method for Residual Stress analysis by X-ray Diffraction
DS/EN 13925-2:2003 Non-destructive testing - X-ray diffraction from polycrystalline and amorphous materials - Part 2: Procedures
DS/EN 13925-3:2005 Non destructive testing - X ray diffraction from polycrystalline and amorphous materials - Part 3: Instruments
DS/CEN ISO/TS 21432/AC:2009 Non-destructive testing - Standards test method for determining residual stresses by neutron diffraction
DS/EN ISO 8130-13:2011 Coating powders - Part 13: Particle size analysis by laser diffraction
DS/EN 13925-1:2003 Non-destructive testing - X-ray diffraction from polycrystalline and amorphous material - Part 1: General principles
DS/EN 1330-11:2007 Non-destructive testing - Terminology - Terms used in X-ray diffraction from polycrystalline and amorphous materials
DS/CEN ISO/TS 21432:2005 Non-destructive testing - Standards test method for determining residual stresses by neutron diffraction (ISO 21432:2005)
DS/EN ISO 15626:2013 Non-destructive testing of welds - Time-of-flight diffraction technique (TOFD) - Acceptance levels
DS/EN 14107:2003 Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of phosphorus content by inductively coupled plasma (ICP) emission spectrometry
DS/EN ISO 10863:2011 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD)

British Standards Institution (BSI), electron diffraction diffraction

BS EN ISO 15902:2005 Optics and photonics - Diffractive optics - Vocabulary
BS EN ISO 15902:2020 Optics and photonics. Diffractive optics. Vocabulary
BS ISO 13067:2011 Microbeam analysis. Electron backscatter diffraction. Measurement of average grain size
BS ISO 13067:2020 Microbeam analysis. Electron backscatter diffraction. Measurement of average grain size
BS ISO 23749:2022 Microbeam analysis. Electron backscatter diffraction. Quantitative determination of austenite in steel
BS ISO 24173:2009 Microbeam analysis - Guidelines for orientation measurement using electron backscatter diffraction
19/30365236 DC BS ISO 13067. Microbeam analysis. Electron backscatter diffraction. Measurement of average grain size
BS ISO 13320:2020 Particle size analysis. Laser diffraction methods
21/30398224 DC BS ISO 23749. Microbeam analysis. Electron backscatter diffraction. Quantitative determination of austenite in steel
BS ISO 13320:2010 Particle size analysis. Laser diffraction methods
BS ISO 13320:2009 Particle size analysis - Laser diffraction methods
23/30435799 DC BS ISO 24173. Microbeam analysis. Guidelines for orientation measurement using electron backscatter diffraction
BS ISO 25498:2018 Tracked Changes. Microbeam analysis. Analytical electron microscopy. Selected area electron diffraction analysis using a transmission electron microscope
BS ISO 25498:2010 Microbeam analysis - Analytical electron microscopy - Selected-area electron diffraction analysis using a transmission electron microscope
19/30333249 DC BS ISO 13320. Particle size analysis. Laser diffraction methods
BS EN 13925-2:2003(2008) Non-destructive testing - X-ray diffraction from polycrystalline and amorphous materials - Procedures
BS EN 13925-3:2005(2009) Non-destructive testing - X-ray diffraction from polycrystalline and amorphous materials - Instruments
BS EN 13925-2:2003 Non-destructive testing - X-ray diffraction from polycrystalline and amorphous materials - Procedures
BS EN 13925-3:2005 Non-destructive testing - X-ray diffraction from polycrystalline and amorphous materials - Instruments
BS ISO 13320-1:2000 Particle size analysis - Laser diffraction methods - General principles
BS EN ISO 8130-13:2010 Coating powders. Particle size analysis by laser diffraction
BS EN ISO 8130-13:2001 Coating powders. Particle size analysis by laser diffraction
BS EN 13925-1:2003(2008) Non-destructive testing - X-ray diffraction from polycrystalline and amorphous materials - General principles
BS EN 13925-1:2003 Non-destructive testing - X-ray diffraction from polycrystalline and amorphous materials - General principles
BS DD CEN ISO/TS 21432:2006 Non-destructive testing - Standard test method for determining residual stresses by neutron diffraction
BS ISO 10110-16:2023 Optics and photonics. Preparation of drawings for optical elements and systems. Diffractive surfaces
BS ISO 23703:2022 Microbeam analysis. Guidelines for misorientation analysis to assess mechanical damage of austenitic stainless steel by electron backscatter diffraction (EBSD)
BS EN 15305:2008 Non-destructive testing - Test method for residual stress analysis by X-ray diffraction
BS EN 1330-11:2007 Non-destructive testing - Terminology - Terms used in X-ray diffraction from polycrystalline and amorphous materials
BS ISO 22262-3:2016 Air quality. Bulk materials. Quantitative determination of asbestos by X-ray diffraction method
21/30395106 DC BS ISO 23703. Microbeam analysis. Guideline for misorientation analysis to assess mechanical damage of austenitic stainless steel by electron backscatter diffraction (EBSD)
BS EN ISO 21432:2020 Non-destructive testing. Standard test method for determining residual stresses by neutron diffraction
BS EN 12698-2:2007 Chemical analysis of nitride bonded silicon carbide refractories - XRD methods
18/30372101 DC BS ISO 21432. Non-destructive testing. Standard test method for determining residual stresses by neutron diffraction
BS ISO 16258-2:2015 Workplace air. Analysis of respirable crystalline silica by X-ray diffraction. Method by indirect analysis
BS ISO 16258-1:2015 Workplace air. Analysis of respirable crystalline silica by X-ray diffraction. Direct-on-filter method
BS DD CEN/TS 14751:2004 Welding - Use of time-of-flight diffraction technique (TOFD) for examination of welds
BS EN ISO 15626:2013 Non-destructive testing of welds. Time-of-flight diffraction technique (TOFD). Acceptance levels
BS EN ISO 10863:2011 Non-destructive testing of Welds. Ultrasonic testing. Use of time-of-flight diffraction technique (TOFD)
BS EN ISO 8130-13:2019 Tracked Changes. Coating powders. Particle size analysis by laser diffraction
BS EN 15617:2009 Non-destructive testing of welds - Time-of-flight diffraction technique (TOFD) - Acceptance levels
BS 3900-J13:2001 Methods of test for paints - Testing of coating powders - Particle size analysis by laser diffraction
22/30430316 DC BS ISO 10110-16. Optics and photonics. Preparation of drawings for optical elements and systems - Part 16. Diffractive surfaces
BS EN 14107:2003 Fat and oil derivatives - Fatty acid methyl esters (FAME) - Determination of phosphorous content by inductively coupled plasma (ICP) emission spectrometry
BS ISO 20203:2005 Carbonaceous materials used in the production of aluminium. Calcined coke. Determination of crystallite size of calcined petroleum coke by X-ray diffraction
BS EN ISO 10863:2020 Non-destructive testing of welds. Ultrasonic testing. Use of time-of-flight diffraction technique (TOFD)
BS ISO 17901-1:2015 Optics and photonics. Holography. Methods of measuring diffraction efficiency and associated optical characteristics of holograms
BS ISO 20203:2006 Carbonaceous materials used in the production of aluminium - Calcined coke - Determination of crystallite size of calcined petroleum coke by X-ray diffraction

KR-KS, electron diffraction diffraction

KS B ISO 15902-2018 Optics and photonics — Diffractive optics — Vocabulary
KS A ISO 13320-2022 Particle size analysis — Laser diffraction methods
KS B ISO 21432-2023 Non-destructive testing — Standard test method for determining residual stresses by neutron diffraction
KS B ISO TS 21432-2017 Non-destructive testing — Standard test method for determining residual stresses by neutron diffraction
KS M ISO 8130-13-2019 Coating Powders — Part 13: Particle size analysis by laser diffraction
KS B ISO 15626-2019 Non-destructive testing of welds — Time-of-flight diffraction technique(TOFD) — Acceptance levels
KS M ISO 20203-2016 Carbonaceous materials used in the production of aluminium－Calcined coke－Determination of crystallite size(Lc) of calcined petroleum coke by X-ray diffraction

ES-UNE, electron diffraction diffraction

UNE-EN ISO 15902:2020 Optics and photonics - Diffractive optics - Vocabulary (ISO 15902:2019) (Endorsed by Asociación Española de Normalización in February of 2020.)
UNE-EN ISO 8130-13:2020 Coating powders - Part 13: Particle size analysis by laser diffraction (ISO 8130-13:2019)
UNE-EN ISO 21432:2022 Non-destructive testing - Standard test method for determining residual stresses by neutron diffraction (ISO 21432:2019)
UNE-EN ISO 15626:2019 Non-destructive testing of welds - Time-of-flight diffraction technique (TOFD) - Acceptance levels (ISO 15626:2018)
UNE-EN ISO 10863:2021 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD) (ISO 10863:2020)

American Society for Testing and Materials (ASTM), electron diffraction diffraction

ASTM UOP905-20 Platinum Agglomeration by X-Ray Diffraction
ASTM UOP905-08 Platinum Agglomeration by X-Ray Diffraction
ASTM UOP905-91 Platinum Agglomeration by X-Ray Diffraction
ASTM F2024-10(2016) Standard Practice for X-ray Diffraction Determination of Phase Content of Plasma-Sprayed Hydroxyapatite Coatings
ASTM F2024-10(2021) Standard Practice for X-ray Diffraction Determination of Phase Content of Plasma-Sprayed Hydroxyapatite Coatings
ASTM F2024-00 Standard Practice for X-ray Diffraction Determination of Phase Content of Plasma-Sprayed Hydroxyapatite Coatings
ASTM E2627-13 Standard Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials
ASTM E2627-13(2019) Standard Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials
ASTM E915-96 Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement
ASTM E915-16 Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement
ASTM E915-96(2002) Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement
ASTM E2373-09 Standard Practice for Use of the Ultrasonic Time of Flight Diffraction (TOFD) Technique
ASTM D5187-91(2007) Standard Test Method for Determination of Crystallite Size (Lc of Calcined Petroleum Coke by X-Ray Diffraction
ASTM D934-80(2003) Standard Practices for Identification of Crystalline Compounds in Water-Formed Deposits By X-Ray Diffraction
ASTM D5187-91(2002) Standard Test Method for Determination of Crystallite Size (L_c) of Calcined Petroleum Coke by X-Ray Diffraction
ASTM D5187-91(1997) Standard Test Method for Determination of Crystallite Size (L_c) of Calcined Petroleum Coke by X-Ray Diffraction
ASTM D5357-98 Standard Test Method for Determination of Relative Crystallinity of Zeolite Sodium A by X-Ray Diffraction
ASTM E915-19 Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement
ASTM E2860-12 Standard Test Method for Residual Stress Measurement by X-Ray Diffraction for Bearing Steels
ASTM E915-10 Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement
ASTM E915-21 Standard Practice for Verifying the Alignment of X-Ray Diffraction Instruments for Residual Stress Measurement
ASTM D8352-20 Standard Test Method for Determination of Relative Crystallinity of Zeolite Beta by X-Ray Diffraction
ASTM D5357-03(2008)e1 Standard Test Method for Determination of Relative Crystallinity of Zeolite Sodium A by X-ray Diffraction
ASTM D5357-03(2013) Standard Test Method for Determination of Relative Crystallinity of Zeolite Sodium A by X-ray Diffraction
ASTM E2627-10 Standard Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials
ASTM D5357-03 Standard Test Method for Determination of Relative Crystallinity of Zeolite Sodium A by X-Ray Diffraction
ASTM E2860-20 Standard Test Method for Residual Stress Measurement by X-Ray Diffraction for Bearing Steels
ASTM E3294-22 Standard Guide for Forensic Analysis of Geological Materials by Powder X-Ray Diffraction
ASTM D5357-19 Standard Test Method for Determination of Relative Crystallinity of Zeolite Sodium A by X-ray Diffraction
ASTM D934-08 Standard Practices for Identification of Crystalline Compounds in Water-Formed Deposits By X-Ray Diffraction
ASTM E1426-14(2019)e1 Standard Test Method for Determining the X-Ray Elastic Constants for Use in the Measurement of Residual Stress Using X-Ray Diffraction Techniques
ASTM D934-80(1999) Standard Practices for Identification of Crystalline Compounds in Water-Formed Deposits By X-Ray Diffraction
ASTM F3419-22 Standard Test Method for Mineral Characterization of Equine Surface Materials by X-Ray Diffraction (XRD) Techniques
ASTM D5758-01(2021) Standard Test Method for Determination of Relative Crystallinity of Zeolite ZSM-5 by X-Ray Diffraction
ASTM E2373/E2373M-19 Standard Practice for Use of the Ultrasonic Time of Flight Diffraction (TOFD) Technique
ASTM D5187-10 Standard Test Method for Determination of Crystallite Size (Lc of Calcined Petroleum Coke by X-Ray Diffraction
ASTM D5758-01(2011)e1 Standard Test Method for Determination of Relative Crystallinity of Zeolite ZSM-5 by X-Ray Diffraction
ASTM D934-22 Standard Practices for Identification of Crystalline Compounds in Water-Formed Deposits By X-Ray Diffraction
ASTM D3906-19 Standard Test Method for Determination of Relative X-ray Diffraction Intensities of Faujasite-Type Zeolite-Containing Materials
ASTM D3906-03(2008) Standard Test Method for Determination of Relative X-ray Diffraction Intensities of Faujasite-Type Zeolite-Containing Materials
ASTM D934-13 Standard Practices for Identification of Crystalline Compounds in Water-Formed Deposits By X-Ray Diffraction
ASTM D5758-01(2015) Standard Test Method for Determination of Relative Crystallinity of Zeolite ZSM-5 by X-Ray Diffraction
ASTM D5187-10(2015)e1 Standard Test Method for Determination of Crystallite Size (Lc) of Calcined Petroleum Coke by X-Ray Diffraction
ASTM E2373-04 Standard Practice for Use of the Ultrasonic Time of Flight Diffraction (TOFD) Technique
ASTM E2373/E2373M-14 Standard Practice for Use of the Ultrasonic Time of Flight Diffraction (TOFD) Technique
ASTM D3906-97 Standard Test Method for Determination of Relative X-ray Diffraction Intensities of Faujasite-Type Zeolite-Containing Materials
ASTM D3720-90(2005) Standard Test Method for Ratio of Anatase to Rutile in Titanium Dioxide Pigments by X-Ray Diffraction
ASTM E1426-98 Standard Test Method for Determining the Effective Elastic Parameter for X-Ray Diffraction Measurements of Residual Stress
ASTM E1426-98(2009)e1 Standard Test Method for Determining the Effective Elastic Parameter for X-Ray Diffraction Measurements of Residual Stress
ASTM F2024-10 Standard Practice for X-ray Diffraction Determination of Phase Content of Plasma-Sprayed Hydroxyapatite Coatings
ASTM E3340-22 Standard Guide for Development of Laser Diffraction Particle Size Analysis Methods for Powder Materials
ASTM D5380-93(2003) Standard Test Method for Identification of Crystalline Pigments and Extenders in Paint by X-Ray Diffraction Analysis
ASTM D3720-90(1999) Standard Test Method for Ratio of Anatase to Rutile in Titanium Dioxide Pigments by X-Ray Diffraction
ASTM D5187-21 Standard Test Method for Determination of Crystallite Size (Lc) of Calcined Petroleum Coke by X-Ray Diffraction
ASTM D5380-93(2021) Standard Test Method for Identification of Crystalline Pigments and Extenders in Paint by X-Ray Diffraction Analysis
ASTM D3906-03(2013) Standard Test Method for Determination of Relative X-ray Diffraction Intensities of Faujasite-Type Zeolite-Containing Materials
ASTM E1426-14 Standard Test Method for Determining the X-Ray Elastic Constants for Use in the Measurement of Residual Stress Using X-Ray Diffraction Techniques
ASTM D3720-90(2011) Standard Test Method for Ratio of Anatase to Rutile in Titanium Dioxide Pigments by X-Ray Diffraction
ASTM D3720-90(2019) Standard Test Method for Ratio of Anatase to Rutile in Titanium Dioxide Pigments by X-Ray Diffraction
ASTM D3906-03 Standard Test Method for Determination of Relative X-ray Diffraction Intensities of Faujasite-Type Zeolite-Containing Materials

Universal Oil Products Company (UOP), electron diffraction diffraction

UOP 905-2008 Platinum Agglomeration by X-Ray Diffraction

国家市场监督管理总局、中国国家标准化管理委员会, electron diffraction diffraction

GB/T 41076-2021 Microbeam analysis—Electron backscatter diffraction—Quantitative determination of austenite in steel
GB/T 36923-2018 Identification of pearl powder―X-ray diffraction analysis
GB/T 39520-2020 Test method for determination the residual stress of spring by X-ray diffraction
GB/T 20724-2021 Microbeam analysis—Method of thickness measurement for thin crystals by convergent beam electron diffraction
GB/T 37983-2019 Testing methods of X-ray diffraction for determining the orientation of crystal materials by rotation
GB/T 40407-2021 X-ray powder diffraction analysis method for determining the phases in portland cement clinker
GB/T 39860-2021 Rapid identification of the surface residual mineral powder on latex products—X-ray diffraction spectrometry
GB/T 41116-2021 Non-destructive testing of welds—Time-of-flight diffraction technique (TOFD)—Acceptance levels
GB/T 40023-2021 Non-destructive testing instruments—Ultrasonic time-of-flight diffraction instrument—Technical requirements
GB/T 41115-2021 Non-destructive testing of welds—Ultrasonic testing—Use of time-of-flight diffraction technique (TOFD)
GB/T 39849-2021 Non-destructive testing instruments—Ultrasonic time-of-flight diffraction instrument—Methods of performance tests
GB/T 37054-2018 Nanotechnology—Testing ratio of anatase to rutile in nano-titanium dioxide—X-ray diffraction
GB/T 23902-2021 Non-destructive testing—Ultrasonic testing—Time-of-flight diffraction technique as a method for detection and sizing of discontinuities

Professional Standard - Energy, electron diffraction diffraction

NB/SH/T 6015-2020 Determination of Unit Cell Parameters of ZSM-23 Molecular Sieve by X-ray Diffraction Method
NB/SH/T 6033-2021 Determination of unit cell parameters of ZSM-22 molecular sieve X-ray diffraction method
NB/SH/T 6024-2021 Determination of Relative Crystallinity of ZSM-5 Molecular Sieve X-ray Diffraction Method
NB/SH/T 0339-2021 Determination of Unit Cell Parameters of Faujasite Molecular Sieve X-ray Diffraction Method
NB/T 47013.10-2015 Nondestructive testing of pressure equipments .Part 10: Ultrasonic time of flight diffraction technique
NB/T 47013.10-2015 Nondestructive Testing of Pressure Equipment Part 10: Ultrasonic Testing by Diffraction Time-of-Flight
NB/T 47013.10-2010 Nondestructive Testing of Pressure Equipment Part 10: Ultrasonic Testing by Diffraction Time-of-Flight

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, electron diffraction diffraction

GB/T 34172-2017 Microbeam analysis—Electron backscatter diffraction—Phase analysis method of metal and alloy
GB/T 34612-2017 Measurement method for X-ray double crystal diffraction rocking curve of sapphire crystals

National Metrological Verification Regulations of the People's Republic of China, electron diffraction diffraction

JJG 629-2014 Polycrystalline X-Ray Diffractometers
JJG 629-1989 Verification Regulation for Polycrystalline X-Ray Diffractometer
JJG(地质) 1014-1990 Verification Regulations for Polycrystalline X-ray Diffractometer

Professional Standard - Education, electron diffraction diffraction

JY/T 0587-2020 General Principles of Polycrystal X-ray Diffraction Methods
JY 141-1982 Light interference, diffraction, polarization demonstrator
JY/T 0588-2020 General Rules for Determination of Crystal and Molecular Structure of Small Molecular Compounds by Single Crystal X-ray Diffraction
JY/T 009-1996 General Principles of Rotating Target Polycrystal X-ray Derivation Method
JY/T 008-1996 General Rules for Determination of Crystal and Molecular Structure of Small Molecular Compounds by Four-Circle Single Crystal X-ray Diffractometer

Professional Standard - Ferrous Metallurgy, electron diffraction diffraction

YB/T 172-2000 Phase quantitative analysis of silica bricks.X-ray diffraction method
YB/T 5320-2006 X-ray Diffraction K Value Method for Quantitative Phase Analysis of Metallic Materials
YB/T 5337-2006 Determination method of metal lattice constant X-ray diffractometer method
YB/T 5338-2006 X-ray Diffraction Method for Quantitative Determination of Retained Austenite in Steel
YB/T 5336-2006 Quantitative Analysis of Carbide Phase in High Speed Steel by X-ray Diffraction Method
YB/T 4183-2009 Laser Diffraction Method for Determination of Particle Size Distribution of Smelting Slag Powder

Society of Automotive Engineers (SAE), electron diffraction diffraction

SAE HS-784-2003 SAE Residual Stress Measurement by X-Ray Diffraction, 2003 Edition
SAE J784-1971 Residual Stress Measurement by X-Ray Diffraction

National Metrological Technical Specifications of the People's Republic of China, electron diffraction diffraction

JJF 1967-2022 Calibration Specification for Reflection Gratings by Laser Diffraction
JJF 1447-2014 Calibration Specification for Ultrasonic Flaw Detectors by Time-of-Flight Diffraction

SAE - SAE International, electron diffraction diffraction

SAE J784A-1971 Residual Stress Measurement by X-Ray Diffraction

国家质量监督检验检疫总局, electron diffraction diffraction

SN/T 4760-2017 X-ray diffraction method for identification of imported zinc concentrates
SN/T 4844-2017 Particle Size Determination of Liquid Pesticide Formulation Laser Diffraction Method

Japanese Industrial Standards Committee (JISC), electron diffraction diffraction

JIS Z 8825:2013 Particle size analysis.Laser diffraction methods
JIS Z 8825:2022 Particle size analysis -- Laser diffraction methods
JIS K 0131:1996 General rules for X-ray diffractometric analysis
JIS H 7805:2005 Method for crystallite size determination in metal catalysts by X-ray diffractometry
JIS Z 8825-1:2001 Particle size analysis -- Laser diffraction methods -- Part 1: General principles
JIS R 1629:1997 Determination of particle size distributions for fine ceramic raw powders by laser diffraction method
JIS Z 8791:2011 Methods of measuring diffraction efficiency and associated optical characteristics of hologram
JIS A 1481-3:2014 Determination of asbestos in building material products -- Part 3: Quantitative analysis of containing asbestos by X-ray diffraction method

American National Standards Institute （ANSI), electron diffraction diffraction

ANSI/HPS N43.2-2021 Radiation Safety for X-ray Diffraction and Fluorescence Analysis Equipment
ANSI N43.2-2001 Radiation Safety for X-ray Diffraction and Fluorescence Analysis Equipment
ANSI/ASTM E1426:1994 Test Method for Determining the Effective Elastic Parameter for X-Ray Diffraction Measurements of Residual Stress
ANSI/ASTM E915:1996 Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement

GOSTR, electron diffraction diffraction

GOST R 58565-2019 Optics and photonics. Diffractive optics. Terms and definitions
GOST 6912.2-1993 Alumina. X-rays difractial method for the determination of alfa-oxide-aluminium
GOST R EN 14107-2009 Fat and oil derivatives. Fatty acid methylesters (FAME). Determination of phosphorus content by inductively coupled plasma (ICP) emission spectrometry

AENOR, electron diffraction diffraction

UNE-EN ISO 15902:2007 Optics and photonics - Diffractive optics - Vocabulary (ISO 15902:2004)
UNE-EN 15305:2010 Non-destructive Testing - Test Method for Residual Stress analysis by X-ray Diffraction
UNE-EN 13925-2:2004 Non-destructive testing - X-ray diffraction from polycrystalline and amorphous materials - Part 2: Procedures
UNE-EN 13925-3:2006 Non destructive testing - X ray diffraction from polycrystalline and amorphous materials - Part 3: Instruments
UNE-EN 13925-1:2006 Non-destructive testing - X-ray diffraction from polycrystalline and amorphous material - Part 1: General principles
UNE-EN 14107:2003 Fat and oil derivatives. Fatty Acid Methyl Esters (FAME). Determination of phosphorus content by inductively coupled plasma (ICP) emission spectrometry
UNE-EN 1330-11:2008 Non-destructive testing - Terminology - Part 11: Terms used in X-ray diffraction from polycrystalline and amorphous materials
UNE-EN ISO 8130-13:2011 Coating powders - Part 13: Particle size analysis by laser diffraction (ISO 8130-13:2001)
UNE-EN ISO 15626:2013 Non-destructive testing of welds - Time-of-flight diffraction technique (TOFD) - Acceptance levels (ISO 15626:2011)

American Gear Manufacturers Association, electron diffraction diffraction

AGMA 08FTM12-2008 In-situ Measurement of Stresses in Carburized Gears via Neutron Diffraction

Professional Standard - Commodity Inspection, electron diffraction diffraction

SN/T 3975-2014 The identification method of bauxite ore is X-ray diffraction method
SN/T 4008-2013 Rapid qualitative screening of talc powder.Powder X-ray diffraction method
SN/T 2649.1-2010 Determination of asbestos in cosmetics for import and export.Part 1:X-ray diffraction and scan electron microscopy method
SN/T 3514-2013 Identification method of texture analysis for grain oriented and non-oriented electrical steels.X-ray diffraction(XRD)
SN/T 3231-2012 Determination of asbestos in talcum.Polarized light microscope and X-ray diffraction method
SN/T 2731-2010 Identification of asbestos in nonmetal minerals.X-radial diffraction instrument-microscope observation method
SN/T 2649.2-2010 Determination of asbestos in import and export cosmetics.Part 2:X-ray diffraction and polarized light microscopy method
SN/T 3011.1-2011 Identification of import solid waste ralated with metal minerals by X-ray diffraction.Part 1:General rules
SN/T 3131-2012 Determination of asbestos in bicycle brake rubbers.Palarized light microscope and X-ray diffraction method

Professional Standard - Public Safety Standards, electron diffraction diffraction

GA/T 2079-2023
GA/T 1422-2017 X-ray Diffraction Method for Examining Composition of Common Fire and Explosives in Forensic Science

水利部, electron diffraction diffraction

SL 536-2011 Calibration method of X-ray diffraction stress measuring device
SL 547-2011 Test method for residual stress of hydraulic metal structures X-ray diffraction method

RU-GOST R, electron diffraction diffraction

GOST R 8.696-2010 State system for ensuring the uniformity of measurements. Interplanar spacings in crystals and the intensity distribution in diffraction patterns. Method for measurement by means of an electron diffractometer
GOST R 59738-2021 Optics and photonics. Diffraction gratings. Types, main dimensions and parameters
GOST R ISO 13067-2016 State system for insuring the uniformity of measurements. Microbeam analysis. Electron backscatter diffraction. Measurement of average grain size
GOST R 8.698-2010 State system for ensuring the uniformity of measurements. Dimensional parameters of nanoparticles and thin films. Method for measurement by means of a small angle X-ray scattering diffractometer
GOST R 57923-2017 Ceramic composites. Determination of particle size distribution of ceramic powders by laser diffraction method
GOST R ISO 20203-2017 Carbonaceous materials for the production of aluminium. Calcined coke. Determination of crystallite size of calcined petroleum coke by X-ray diffraction

AGMA - American Gear Manufacturers Association, electron diffraction diffraction

08FTM12-2008 In-situ Measurement of Stresses in Carburized Gears via Neutron Diffraction

Group Standards of the People's Republic of China, electron diffraction diffraction

T/CSTM 00166.2-2020 Characterization for graphene materials Part 2 X-ray diffraction
T/CASAS 014-2021 Measuring method for basal plane bending of SiC substrate — High resolution X-ray diffractometry
T/YXNX 004-2021 Determination of mullite phase in aluminum-silicon refractories -Full spectrum fitting method for X-ray diffraction

Occupational Health Standard of the People's Republic of China, electron diffraction diffraction

GBZ 115-2002 Radiological standards for X-ray Diffraction and fluorescence analysis equipment

Professional Standard - Nuclear Industry, electron diffraction diffraction

EJ/T 553-1991 Determination of Mineral Cell Parameters Powder X-ray Diffraction Method
EJ/T 20221-2018 Determination of Particle Size of Reprocessed Uranium Trioxide Powder by Laser Diffraction Method

Standard Association of Australia （SAA）, electron diffraction diffraction

AS 2879.3:1991 Alumina - Determination of alpha alumina content by X-ray diffraction
AS 2879.3:2010(R2013)
AS 4863.1:2000 Particle size analysis - Laser diffraction methods - General Principles
AS 2879.3:2010 Alumina, Part 3: Determination of alpha alumina content by X-ray diffraction

海关总署, electron diffraction diffraction

HS/T 49-2016 Talc powder particle size determination laser diffraction method
SN/T 3011.1-2020 Identification of the physical phase of imported solid waste of metal minerals by X-ray diffraction method Part 1: General principles

Professional Standard - Petroleum, electron diffraction diffraction

SY/T 5983-1994 X-ray Diffraction Identification Method of Illite/Smectite Interlayer Minerals
SY/T 5163-1995 X-ray Diffraction Analysis Method for Relative Content of Clay Minerals in Sedimentary Rocks
SY/T 5163-2010 Analysis method for clay minerals and ordinary non-clay minerals in sedimentary rocks by the X-ray diffraction
SY/T 6210-1996 X-ray Diffraction Quantitative Analysis Method of Total Clay Minerals and Common Non-clay Minerals in Sedimentary Rocks

Guangdong Provincial Standard of the People's Republic of China, electron diffraction diffraction

DB44/T 1078-2012 Laser Diffraction Method for Particle Size Analysis of Ceramic Raw Materials

未注明发布机构, electron diffraction diffraction

BS EN 15305:2008(2009) Non - destructive Testing — Test Method for Residual Stress analysis by X - ray Diffraction
BS ISO 21432:2019 Non - destructive testing — Standard test method for determining residual stresses by neutron diffraction
BS ISO 20203:2005(2006) Carbonaceous materials used in the production of aluminium — Calcined of crystallite size of calcined petroleum coke by X - ray diffraction

IX-IX-IEC, electron diffraction diffraction

IEC TS 62607-6-17:2023 Nanomanufacturing - Key control characteristics - Part 6-17: Graphene-based material - Order parameter: X-ray diffraction and transmission electron microscopy

Professional Standard - Non-ferrous Metal, electron diffraction diffraction

YS/T 976-2014 Determination of α-alumina content in calcined alumina by X-ray diffraction
YS/T 785-2012 Determination of relative crystallinity of zeolite sodium A by X-ray diffraction
YS/T 438.5-2013 Methods for physical performance determination of Sandy alumina.Part 5:X-ray diffraction spectrum method for determination of α-alumina content

Lithuanian Standards Office , electron diffraction diffraction

LST EN 15305-2008 Non-destructive Testing - Test Method for Residual Stress analysis by X-ray Diffraction
LST EN 15305-2008/AC-2009 Non-destructive Testing - Test Method for Residual Stress analysis by X-ray Diffraction
LST EN ISO 15902:2005 Optics and optical instruments - Diffractive optics - Vocabulary (ISO 15902:2004)
LST EN 13925-3-2005 Non destructive testing - X ray diffraction from polycrystalline and amorphous materials - Part 3: Instruments
LST EN 13925-2-2004 Non-destructive testing - X-ray diffraction from polycrystalline and amorphous materials - Part 2: Procedures
LST EN 13925-1-2004 Non-destructive testing - X-ray diffraction from polycrystalline and amorphous material - Part 1: General principles
LST EN 1330-11-2007 Non-destructive testing - Terminology - Terms used in X-ray diffraction from polycrystalline and amorphous materials
LST EN ISO 21432:2020 Non-destructive testing - Standard test method for determining residual stresses by neutron diffraction (ISO 21432:2019)
LST EN 15617-2009 Non-destructive testing of welds - Time-of-flight diffraction technique (TOFD) - Acceptance levels
LST EN 14107-2004 Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of phosphorus content by inductively coupled plasma (ICP) emission spectrometry
LST EN ISO 8130-13:2011 Coating powders - Part 13: Particle size analysis by laser diffraction (ISO 8130-13:2001)

IT-UNI, electron diffraction diffraction

UNI EN ISO 21432:2021 Non-destructive testing - Standard test method for determining residual stresses by neutron diffraction
UNI 6966-1971

Professional Standard - Electricity, electron diffraction diffraction

DL/T 2056-2019 Ion exchange resin and limestone powder particle size detection method laser diffraction method
DL/T 1317-2014 The code of ultrasonic time of flight diffraction technique for butt welds in fossil-fuel power plant
DL/T 1151.22-2012 Analytical methods of scale and corrosion products in power plants.Part 22: standard test methods of X-ray fluorescence spectrometry and X-ray diffraction
DL/T 330-2010 Ultrasonic time of flight diffraction technique in welded joints of hydroelectric or hydraulic engineering steel structure and equipment
DL/T 330-2021 Diffraction time-of-flight ultrasonic testing of metal structures and equipment welded joints in hydropower and water conservancy projects
DL/T 820.3-2020 Technical regulations for ultrasonic testing of pipe welded joints Part 3: Diffraction time-of-flight method

Professional Standard - Aviation, electron diffraction diffraction

HB 20116-2012 Test method for residual stress analysis on aero-engine blade by x-ray diffraction

Professional Standard - Electron, electron diffraction diffraction

SJ 20714-1998 Test method for sub-surface damege of gallium arsenide polished wafer by X-ray double crystal diffraction

RO-ASRO, electron diffraction diffraction

STAS SR 13203-1994 Metallic powders. Determination of size distribution of powders. Diffraction method

Professional Standard - Customs, electron diffraction diffraction

HS/T 12-2006 Quantitative analysis of talc, chlorite, magnesite mixed phase.Method of X-ray diffractometer

FI-SFS, electron diffraction diffraction

SFS 3229-1976

YU-JUS, electron diffraction diffraction

JUS B.E4.095-1981 Bottles for conservated human blood, derivate of blood, parenteral solution and water for injections

Fujian Provincial Standard of the People's Republic of China, electron diffraction diffraction

DB35/T 1914-2020 Determination of β-crystal content in β-crystal polypropylene pipes and fittings (X-ray diffraction method)

国家能源局, electron diffraction diffraction

SY/T 5163-2018 X-ray diffraction analysis method of clay minerals and common non-clay minerals in sedimentary rocks

AT-ON, electron diffraction diffraction

OENORM EN ISO 21432:2021 Non-destructive testing - Standard test method for determining residual stresses by neutron diffraction (ISO 21432:2019)

CH-SNV, electron diffraction diffraction

SN EN ISO 21432:2021 Non-destructive testing - Standard test method for determining residual stresses by neutron diffraction (ISO 21432:2019)

PL-PKN, electron diffraction diffraction

PN-EN ISO 21432-2021-03 E Non-destructive testing -- Standard test method for determining residual stresses by neutron diffraction (ISO 21432:2019)

Professional Standard - Petrochemical Industry, electron diffraction diffraction

SH/T 0625-1995 Determination of γ-Al₂O₃ content in silicon-alumina catalyst (X-ray diffraction method)
SH/T 1612.8-2005 Purified terephthalic acid for industrial use - Determination of partical size distribution - Laser diffraction method

Professional Standard - Building Materials, electron diffraction diffraction

JC/T 2176-2013 Fine ceramics (advanced ceramics, advanced technical ceramics).determination of particle size distribution of ceramic powders by laser diffraction menthod

Professional Standard - Chemical Industry, electron diffraction diffraction

HG/T 6149-2023 Determination of Silica Crystal Phase Content in Hydrogenation Catalyst and Its Support X-ray Diffraction Method

CO-ICONTEC, electron diffraction diffraction

ICONTEC 2979-1991

ZA-SANS, electron diffraction diffraction

SANS 54107:2007 Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of phosphorus content by inductively coupled plasma (ICP) emission spectrometry