Electronic and electrical components test methods

Electronic and electrical components test methods, Total:500 items.

In the international standard classification, Electronic and electrical components test methods involves: Electrical and electronic testing, Aerospace electric equipment and systems, Environmental testing, Electronic components in general, Electromechanical components for electronic and telecommunications equipment, Mechanical structures for electronic equipment, Materials for aerospace construction, Construction materials, Electronic component assemblies, Semiconductor devices, Components for electrical equipment, Aircraft and space vehicles in general, Printed circuits and boards, Capacitors, On-board equipment and instruments, Road vehicle systems, Insulating fluids, Optics and optical measurements, Optoelectronics. Laser equipment.

Defense Logistics Agency, Electronic and electrical components test methods

DLA MIL-STD-202 G CHG NOTICE 2-2013 TEST METHOD STANDARD ELECTRONIC AND ELECTRICAL COMPONENT PARTS
DLA MIL-STD-202 G CHG NOTICE 1-2003 TEST METHOD STANDARD ELECTRONIC AND ELECTRICAL COMPONENT PARTS

Korean Agency for Technology and Standards (KATS), Electronic and electrical components test methods

KS C 6013-2022 Testing method of endurance(electrical) for electronic component
KS C 6013-1982(2017) Testing method of endurance(electrical) for electronic component
KS C 6013-1982(2022) Testing method of endurance(electrical) for electronic component
KS C 6019-1992 Test methods of air tightness for electronic components
KS C 6020-1992 Test methods of Low air pressure for electronic components
KS C 6014-1988 Test methods for solderability of electronic components
KS C 6012-1982(2017) Testing method of sealing(immersion cyclic) for electronic components
KS C 6021-2019 Endurance(mechanical) testing method for electronic components
KS C 6011-1992 Test methods for CHANGE OF TEMPERATURE of electronic components
KS C 6017-1988 TESTING METHOD FOR IMPACT STRENGTH OF electronic components
KS C IEC PAS 62162-2022 Field－induced charged－device model test method for electrostatic discharge withstand thresholds of microelectronic components
KS C IEC 60068-2-82-2012(2017) Environmental testing－Part 2-82：Tests－Test Tx：Whisker test methods for electronic and electric components
KS C IEC PAS 62162:2002 Field－induced charged－device model test method for electrostatic discharge withstand thresholds of microelectronic components
KS C IEC 60068-2-82:2012 Environmental testing－Part 2-82：Tests－Test Tx：Whisker test methods for electronic and electric components
KS C IEC 62025-2-2023 High frequency inductive components — Non-electrical characteristics and measuring methods — Part 2: Test methods for non-electrical characteristics
KS C IEC 60512-6-2014 Electromechanical components for electronic equipment－Basic testing procedures and measuring methods－Part 6：Climatic tests and soldering tests
KS C IEC PAS 62162-2002(2022) Field－induced charged－device model test method for electrostatic discharge withstand thresholds of microelectronic components
KS C IEC 60512-6-2004(2009) Electromechanical components for electronic equipment－Basic testing procedures and measuring methods－Part 6：Climatic tests and soldering tests
KS C IEC 62025-2:2018 High frequency inductive components — Non-electrical characteristics and measuring methods — Part 2: Test methods for non-electrical characteristics
KS C 2115-2003(2018) Test methods for ceramic materials for electrical insulation
KS C IEC 62025-1-2023 High frequency inductive components — Non-electrical characteristics and measuring methods — Part 1: Fixed, surface mounted inductors for use in electronic and telecommunication equipment
KS C IEC 60512-11-1-2014 Electromechanical components for electronic equipment－Basic testing procedure and measuring methods－Part 11：Climate tests－Section 1：Test 11a－Climatic sequence
KS C IEC 60512-11-1:2002 Electromechanical components for electronic equipment-Basic testing procedure and measuring methods-Part 11:Climate tests-Section 1:Test 11a-Climatic sequence
KS C IEC 60512-11-1:2014 Electromechanical components for electronic equipment－Basic testing procedure and measuring methods－Part 11：Climate tests－Section 1：Test 11a－Climatic sequence
KS C IEC 60512-11-1-2002(2013) Electromechanical components for electronic equipment－Basic testing procedure and measuring methods－Part 11：Climate tests－Section 1：Test 11a－Climatic sequence
KS C IEC 60512-9-2014 Electromechanical components for electronic equipment－Basic testing procedures and measuring methods－Part 9：Miscellaneous tests
KS C IEC 60512-11-8:2004 Electromechanical components for electronic equipment-Basic testing procedures and measuring methods-Part 11:Climatic tests-Section 8:Test 11h-Sand and dust
KS C IEC 60512-11-14:2004 Electromechanical components for electronic equipment-Basic testing procedures and measuring methods-Part 11:Climatic tests-Section 14:Test 11p-Flowing single gas corrosion test
KS C IEC 60512-11-14:2014 Electromechanical components for electronic equipment－Basic testing procedures and measuring methods－Part 11：Climatic tests－Section 14：Test 11p－Flowing single gas corrosion test
KS C IEC 60747-5-3:2004 Semiconductor devices－Discrete devices－Part 5－3：optoelectronic devices－Measuring method

Military Standard of the People's Republic of China-General Armament Department, Electronic and electrical components test methods

GJB 360.31-1987 Test methods for electronic and electrical components Capacitance test
GJB 360.34-1987 Test methods for electronic and electrical components Fixed resistor current noise test
GJB 360B-2009 Test methods for electronic and electrical component pasrts
GJB 360.33-1987 Test methods for electronic and electrical components Contact resistance testing
GJB 360.29-1987 Test methods for electronic and electrical components DC resistance test
GJB 360.28-1987 Test methods for electronic and electrical components Insulation resistance test
GJB 360.35-1987 Test methods for electronic and electrical components Resistance voltage coefficient test
GJB 360.27-1987 Test methods for electronic and electrical components Dielectric withstand voltage test
GJB 360.5-1987 Test methods for electronic and electrical components Low pressure test
GJB 360.30-1987 Test methods for electronic and electrical components Resistance-temperature characteristics test
GJB 360.1-1987 General principles for test methods of electronic and electrical components
GJB 360.32-1987 Test methods for electronic and electrical components Quality factor (Q) test
GJB 360.36-1987 Test methods for electronic and electrical components Contact jitter monitoring
GJB 360.2-1987 Test methods for electronic and electrical components Salt spray test
GJB 360.12-1987 Test methods for electronic and electrical components Sealing test
GJB 360.4-1987 Test methods for electronic and electrical components Dip test
GJB 360.10-1987 Test methods for electronic and electrical components Sand and dust test
GJB 360.6-1987 Test methods for electronic and electrical components Moisture resistance test
GJB 360.9-1987 Test methods for electronic and electrical components Explosive atmosphere testing
GJB 360.18-1987 Test methods for electronic and electrical components Solderability test
GJB 360.22-1987 Test methods for electronic and electrical components Acceleration test
GJB 360.26-1987 Test methods for electronic and electrical components Particle impact noise detection
GJB 360.13-1987 Test methods for electronic and electrical components Low frequency vibration test
GJB 360.8-1987 Test methods for electronic and electrical components High temperature life test
GJB 360.25-1987 Test methods for electronic and electrical components Solvent resistance test
GJB 360.15-1987 Test methods for electronic and electrical components High frequency vibration test
GJB 360.14-1987 Test methods for electronic and electrical components Random drop test
GJB 360.24-1987 Test methods for electronic and electrical components Random vibration test
GJB 360.16-1987 Test methods for electronic and electrical components Rotation life test
GJB 360.20-1987 Test methods for electronic and electrical components - Soldering heat resistance test
GJB 360.7-1987 Test methods for electronic and electrical components Temperature shock test
GJB 360.3-1987 Test methods for electronic and electrical components Steady state damp heat test
GJB 360.38-1987 Test methods for electronic and electrical components Medium current switching test
GJB 360.17-1987 Test methods for electronic and electrical components Strong impact impact test
GJB 360.21-1987 Test methods for electronic and electrical components Terminal strength test
GJB 360.23-1987 Test methods for electronic and electrical components Impact (specified pulse) test
GJB 360.19-1987 Test methods for electronic and electrical components X-ray photographic inspection
GJB 9397-2018 Test method for neutron radiation effects of military electronic components
GJB 360.11-1987 Test methods for electronic and electrical components Flammability (external flame) test
GJB 360.37-1987 Test methods for electronic and electrical components Low-level load switching life test
GJB 548B-2005 Test methods and procedures for microelectronic device
GJB 548A-1996 Microelectronic device test methods and procedures
GJB 548C-2021 Microelectronic device test methods and procedures
GJB 548-1988 Microelectronic device test methods and procedures

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Electronic and electrical components test methods

GJB 360A-1996 Test methods for electronic and electrical component parts

PL-PKN, Electronic and electrical components test methods

PN T04603-1990 Electronic components Variable capacitors Terms and methods ot' tests
PN T04570-1974 Electronic transformers and choke coils Methods of electrical testing
PN T80012-1972 Electronic components Air dielectr?c rotary variable capacitors General re?uirements and tests
PN T80001-1974 Electronic components Mica capacitors General re?uirements and tests
PN T80006-1988 Electronic components Aluminium electrolytic polar capacitors General requirements and tests
PN T80250-1971 Electronic components Sockets and accesories for electronic plug-in devices Reguirements and tnethods of ?est
PN T05126-1987 Eicctromechanical components for elctronic equipment; basie testing procedures and mcasuring methods Climatic tests and solderini: tests
PN T05123-1986 Electromechanical components for electronic e?uipment; basie testing procedures and measuring methods Current-carrying capacity tests
PN T05124-1986 Electromechanical components for electronic equipment; basie testing procedures and measuring methods Dynamie stress tests
PN T05122-1986 Electromechanical components for electronic e?uipment; basie testingprocedures and measuring methods General examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests
PN T05127-1987 Electromechanical components for electronic e?uipment; basie testing procedures and measuring methods Mechanical operating tests and sealing tests
PN T80015-1990 Electronic components Variable tuning capacitors type A General re?uirements and tests
PN T80004-1988 Electronic components Fixed capacitors of ceramic dielectric class 1 General re?uirements and tests
PN T05128-1988 Electromechanical components tor electronic e?uipment; basie testing procedures and measuring methods Connector tests (mechanical) and mechanical tests on contacts and terminations

British Standards Institution (BSI), Electronic and electrical components test methods

BS EN 2591-7301:2001 Elements of electrical and optical connection. Test methods - Electrical elements. Temperature endurance of couplers
BS EN 60068-2-82:2007 Environmental testing - Tests - Test Tx - Whisker test methods for electronic and electric components
BS EN 2591-702:2001 Elements of electrical and optical connection - Test methods - Electrical elements - Measurement of signal distortion of couplers
BS EN 2591-701:2001 Elements of electrical and optical connection - Test methods - Electrical elements - Measurement of open circuit impedance of couplers
BS EN 2591-706:2001 Elements of electrical and optical connection - Test methods - Electrical elements - Transmission test
BS EN 2591-703:2001 Elements of electrical and optical connection - Test methods - Electrical elements - Common mode rejection of couplers
BS EN 2591-709:2001 Elements of electrical and optical connection - Test methods - Electrical elements - Tensile strength of couplers
BS EN 2591-705:2001 Elements of electrical and optical connection - Test methods - Electrical elements - Measurement of stub input impedance of couplers
BS EN 2591-708:2001 Elements of electrical and optical connection - Test methods - Electrical elements - Measurement of surface transfer impedance of couplers
BS EN 2591:7301:2001 Elements of electrical and optical connection - Test methods - Electrical elements - Temperature endurance of couplers
BS EN 60512-11-8:1999 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Climatic tests. Test 11h. Sand and dust
BS EN 2591-707:2001 Elements of electrical and optical connection - Test methods - Electrical elements - Measurement of characteristic impedance of a bus or a stub terminator
BS EN 2591-704:2001 Elements of electrical and optical connection - Test methods - Electrical elements - Measurement of turns ratio on a transformer used in a coupler
BS EN 2591-6402:2001 Elements of electrical and optical connection. Test methods - Optical elements. Shock
BS EN 2591-6317:2002 Elements of electrical and optical connection. Test methods - Optical elements. Flammability
BS EN 2591-6403:2001 Elements of electrical and optical connection. Test methods - Optical elements. Vibrations
BS EN 2591-6307:2001 Elements of electrical and optical connection. Test methods - Optical elements. Salt mist
BS EN 2591-6314:2001 Elements of electrical and optical connection. Test methods - Optical elements. Immersion at low air pressure
BS EN 2591-6415:2002 Elements of electrical and optical connection. Test methods - Optical elements. Test probe damage
BS EN 2591-6405:2002 Elements of electrical and optical connection. Test methods - Optical elements. Axial load
BS EN 2591-6316:2001 Elements of electrical and optical connection. Test methods - Optical elements. Ozone resistance
BS EN 2591-6315:2001 Elements of electrical and optical connection. Test methods - Optical elements. Fluid resistance
BS EN 2591-6306:2001 Elements of electrical and optical connection. Test methods - Optical elements. Mould growth
BS EN 2591-6324:2002 Elements of electrical and optical connection. Test methods - Optical elements. Interfacial sealing
BS EN 2591-6404:2002 Elements of electrical and optical connection. Test methods - Optical elements. Transverse load
BS EN 2591-6318:2002 Elements of electrical and optical connection. Test methods - Optical elements. Fire resistance
BS EN 2591-6101:2001 Elements of electrical and optical connection. Test methods - Optical elements. Visual examination
BS EN 2591-6303:2001 Elements of electrical and optical connection. Test methods - Optical elements. Cold/low pressure and damp heat
BS EN IEC 62025-2:2019 High frequency inductive components. Non-electrical characteristics and measuring methods - Test methods for non-electrical characteristics
BS EN 2591-6406:2002 Elements of electrical and optical connection. Test methods - Optical elements. Mechanical endurance
BS EN 2591-6301:2001 Elements of electrical and optical connection. Test methods - Optical elements. Endurance at temperature
BS EN 2591-6401:2001 Elements of electrical and optical connection. Test methods - Optical elements. Acceleration steady state
BS EN 2591-210:1998 Elements of electrical and optical connection - Test methods - Electrical overload
BS EN 60512-11-3:2002 Connectors for electronic equipment - Tests and measurements - Climatic tests - Test 11c - Damp heat, steady state
BS EN 2591-310:1998 Elements of electrical and optical connection - Test methods - Cold
BS EN 62813:2015 Lithium ion capacitors for use in electric and electronic equipment. Test methods for electrical characteristics
BS EN 2591-6305:2001 Elements of electrical and optical connection. Test methods - Optical elements. Rapid change of temperature
BS EN 2591:6307:2001 Elements of electrical and optical connection - Test methods - Optical elements - Salt mist
BS EN 2591:6402:2001 Elements of electrical and optical connection - Test methods - Optical elements - Shock
BS EN 2591:6403:2001 Elements of electrical and optical connection - Test methods - Optical elements - Vibrations
BS EN 2591-322:1998 Elements of electrical and optical connection - Test methods - Hermeticity
23/30477965 DC BS EN IEC 62813. Lithium ion capacitors for use in electric and electronic equipment. Test methods for electrical characteristics
BS EN 2591-207:1996 Elements of electrical and optical connection - Test methods - Voltage proof test
BS EN 2591-613:2002 Elements of electrical and optical connection - Test methods - Optical elements - Impact test
BS EN IEC 60068-2-82:2019 Environmental testing. Tests. Test Xw1: Whisker test methods for components and parts used in electronic assemblies
BS EN 60512-1:2001 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - General
BS EN IEC 62024-1:2018 High frequency inductive components. Electrical characteristics and measuring methods. Nanohenry range chip inductor
BS EN 2591:6415:2002 Elements of electrical and optical connection - Test methods - Optical elements - Test probe damage
BS EN 2591:6317:2002 Elements of electrical and optical connection - Test methods - Optical elements - Flammability
BS EN 2591-306:1998 Elements of electrical and optical connection - Test methods - Mould growth
BS EN 2591-308:1998 Elements of electrical and optical connection - Test methods - Sand and dust
BS EN 2591-402:1998 Elements of electrical and optical connection - Test methods - Shock
BS EN 2591-502:2001 Elements of electrical and optical connection - Test methods - Restricted entry
BS EN 2591-402:2012 Aerospace series. Elements of electrical and optical connection. Test methods. Shock
BS EN 2591-507:2002 Elements of electrical and optical connection - Test methods - Plating porosity
BS EN IEC 62024-2:2020 High frequency inductive components. Electrical characteristics and measuring methods. Rated current of inductors for DC-to-DC converters
BS EN 2591:6101:2001 Elements of electrical and optical connection - Test methods - Optical elements - Visual examination
BS EN 2591:6306:2001 Elements of electrical and optical connection - Test methods - Optical elements - Mould growth
BS EN 2591-601:2001 Elements of electrical and optical connection - Test methods - Optical elements - Insertion loss
BS EN 2591:6404:2002 Elements of electrical and optical connection - Test methods - Optical elements - Transverse load
BS EN 2591:6405:2002 Elements of electrical and optical connection - Test methods - Optical elements - Axial load
BS EN 2591:6318:2002 Elements of electrical and optical connection - Test methods - Optical elements - Fire resistance
BS EN 2591-610:2001 Elements of electrical and optical connection - Test methods - Optical elements - Effectiveness of cable attachment - Cable pulling
BS EN 60749-35:2006 Semiconductor devices - Mechanical and climatic test methods - Acoustic microscopy for plastic encapsulated electronic components
BS EN 60512-14-7:1998 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Sealing tests. Test 14g. Impacting water
BS EN 60512-11-1:1999 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Climatic tests - Test 11a - Climatic sequence
BS EN 2591:6314:2001 Elements of electrical and optical connection - Test methods - Optical elements - Immersion at low air pressure
BS EN 2591-211:2002 Elements of electrical and optical connection - Test methods - Capacitance
BS EN 2591-611:2001 Elements of electrical and optical connection - Test methods - Optical elements - Effectiveness of cable attachment - Cable torsion
BS EN 2591-315:1998 Elements of electrical and optical connection - Test methods - Fluid resistance
BS EN 2591-318:1998 Elements of electrical and optical connection - Test methods - Fire-resistance
BS EN 2591-513:2002 Elements of electrical and optical connection - Test methods - Magnetic permeability
BS EN 2591-317:1998 Elements of electrical and optical connection - Test methods - Flammability
BS EN 2591:6303:2001 Elements of electrical and optical connection - Test methods - Optical elements - Cold/low pressure and damp heat
14/30314465 DC BS EN 62956. Hybrid electric double layer capacitors for use in electric and electronic equipment. Test methods for electrical characteristics
BS EN 2591-605:2002 Elements of electrical and optical connection - Test methods - Optical elements - Return loss
BS EN 2591-201:1996 Elements of electrical and optical connection - Test methods - Contact resistance - Low level
BS EN 2591-205:1996 Elements of electrical and optical connection - Test methods - Housing (shell) electrical continuity
BS EN 2591:6301:2001 Elements of electrical and optical connection - Test methods - Optical elements - Endurance at temperature
BS EN 2591:6406:2002 Elements of electrical and optical connection - Test methods - Optical elements - Mechanical endurance
BS EN 2591:6324:2002 Elements of electrical and optical connection - Test methods - Optical elements - Interfacial sealing
BS EN 2591:6316:2001 Elements of electrical and optical connection - Test methods - Optical elements - Ozone resistance
BS EN 2591-410:1998 Elements of electrical and optical connection - Test methods - Insert retention in housing (axial)
BS EN 2591-214:2005 Elements of electrical and optical connection — Test methods — Part 214: Lightning strike, current and voltage pulse
BS EN 2591-6321:2002 Aerospace series. Elements of electrical and optical connection. Test methods - Optical elements. Damp heat, cyclic test
BS EN 2591-325:2002 Elements of electrical and optical connection - Test methods - Ice resistance
BS EN 2591-206:1996 Elements of electrical and optical connection - Test methods - Measurements of insulation resistance
BS EN 3909:2008 Aerospace series. Test fluids and test methods for electric components and sub-assemblies
BS EN 3909:2007 Aerospace series — Test fluids and test methods for electric components and sub-assemblies
BS EN 2591-101:1994 Elements of electrical and optical connection - Test methods - Visual examination
BS EN 2591-323:1998 Elements of electrical and optical connection - Test methods - Thermal shock
BS EN 2591-324:1998 Elements of electrical and optical connection - Test methods - Interfacial sealing
BS EN 2591-405:1998 Elements of electrical and optical connection - Test methods - Axial load
BS EN 2591-404:1998 Elements of electrical and optical connection - Test methods - Transverse load

GM Daewoo, Electronic and electrical components test methods

GMKOREA EDS-T-5218-2008 Electrical and Electronic Relay Test Methods

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Electronic and electrical components test methods

GB 5594.1-1985 Performance test methods for structural ceramic materials of electronic components Test methods for air tightness
GB 5594.5-1985 Test methods for performance of structural ceramic materials for electronic components Test methods for volume resistivity
GB/T 5594.5-1985 Test methods for properties of structure ceramic used in electronic components--Test method for volume resistivity
GB/T 5095.11-1997 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 11: Climatic tests
GB/T 5095.11-5095.12-1997 Electromechanical components for electronic equipment Basic testing procedures and measuring methods
GB/T 5095.6-1997 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 6: Climatic tests and soldering tests
GB/T 5594.6-2015 Test methods for properties of structure ceramics used in electronic component and device.Part 6:Test method for chemical durability
GB 5594.2-1985 Test method for performance of structural ceramic materials for electronic components Test method for Young's modulus of elasticity and Poisson's ratio
GB/T 5594.7-2015 Test methods for properties of structure ceramic used in electronic components and device.Part 7:Test method for liquid permeability
GB/T 32207-2015 Standard practice for use of electron-capture detectors in gas chromatography
GB/T 4937.35-2024 Semiconductor devices - Mechanical and climatic test methods - Part 35: Acoustic microscopic examination of plastically encapsulated electronic components
GB/T 5594.4-2015 Test methods for properties of structure ceramic used in electronic component and device.Part 4:Test method for permittivity and dielectric loss angle tangent value
GB/T 5594.3-2015 Test methods for properties of structure ceramic used in electronic components and device.Part 3:Test method for mean coefficient of linear expansion
GB/T 15651.3-2003 Discrete semiconductor devices and integrated circuits Part 5-3:Optoelectronic devices Measuring methods
GB/T 5594.8-2015 Test methods for properties of structure ceramic used in electronic components and device.Part 8:Test method for microstructure

YU-JUS, Electronic and electrical components test methods

JUS N.R4.430-1978 Ekctromechanical components for electronic equipment. Test methods. Test 10a: Electrical overload (svritches)
JUS N.R4.400-1991 Electromechanical components for electronic eguipment. Test methods. General
JUS N.R4.448-1987 Elcctromecltanical components for electronic equipment. Test methods. Test 13e: Polarization method
JUS N.R4.415-1979 Etectromechanical components for electronic equipment. Test methods. Test 5a: Temperature rise
JUS N.R4.414-1979 Electromechanical components for electromc equipment. Test methods. Test 4b: Partial discharge
JUS N.R4.447-1978 Electromechanical components for electronic equipment. Test 13d: operating torque
JUS N.R4.485-1990 Electromechanical components for electronic equipment. Test methods. Test 15f: Effectiveness of conector couoiino devices
JUS N.R4.497-1990 Electromechanical components for electronic eguipment. Test merhods. Test 12c:Soiderabitity,dewe- tting
JUS N.R4.442-1978 Electromechanical components for electromc eguipment. Test methods. Test 1 lk: Low airpressure
JUS N.R4.205-1989 Electromechanical components for electronic eguipments. Fiat, guick-connect ter- minations
JUS N.R4.421-1978 Electromechanical components for electronic equipment. Test 7a: Freefall
JUS N.R4.410-1989 Electromechanical components for electronic equipment.Test methods,Test 2e: Con- tact disturbance.
JUS N.R4.424-1977 Electromechanical components for electronic eguipment. Test metho?s. Test 8b: Static load, axial
JUS N.R4.481-1989 Electromechanical components for electronic equipment. Test methods. Test 11n: Gas tightness, solderless wrapped connections
JUS N.R4.464-1978 Electromechanical components for electronic equipment. Test metho?s. Test 16f: Robustness of terminations
JUS N.R4.446-1991 Electromechanicalcomponents forelectronic eguipment. Test 13c: Operating force (switthes>
JUS N.R4.466-1978 Electromechanical components for electronic equipment. Test methods. Test 17a: Cable clamp, robustness
JUS N.R4.422-1978 Electromechanical components for electronk equipment. Test methods. Test 7b: Mechanical strength impact test
JUS N.R4.426-1977 Electromechanical components for electronic equipment. Test methods. Test 9a: Mechanical operation (Endurance)
JUS N.R4.469-1978 Electromechanical components for electronic equipment. Test methods. Test 17d: Cable damp, resistance to cable torsion
JUS N.R4.468-1978 Electromechanical components for dectronic equipment. Test methods. Test 17c: Cable clamp, resistance to cable pull (tensUe)
JUS N.R4.467-1978 Electromechanical components for electronic equipment. Test methods. Test 17b: Cable clamp, resistance to cable rotation
JUS N.R4.447-1991 Electromechanicalcomponents for electronic eguipment. Test 13d: Operating torgue (switches)
JUS N.R4.461-1990 Electromechanicai components for electronic equipment. Test methods. Test 16c: Contact bending strength
JUS N.R4.454-1977 Electromechanical components for ekctronic equipment. Test methods. Test 15a: Contact retention in insert
JUS N.R4.462-1979 Electromechanical components for electronic equipment. Test methods. Test 16 d: Tensile strength (arimped cormecttons)
JUS N.R4.495-1990 Electromechanical components for electronic equipment. Test methods. Test 12a: Solderability, vvetting, solder bath method
JUS N.R4.499-1990 Electrcmechanical components for eiectronic epuipment. Test methods. Tast 12e: Resistance to soide- ring heat, iron method
JUS N.R4.482-1987 Electromechanicd components for electronic equipment. Test metho?s. Test 2h: Resistance (earthing) from actuator to mounting bushing (surface)
JUS N.R4.456-1977 Electromechanical components for electronic equipment.Test methods. Test 15c: Insert retention in housing (torsional)
JUS N.R4.465-1980 Elektromechanical components for electronic equipment. Test methods. Test 16 g: Measurement of contact deformation after crimping
JUS N.R4.455-1979 Electromechanical oomponents for electronic equipment. Test methods. Test 15b: Insert retention in housine (axiaU

Electronic Industrial Alliance (U.S.), Electronic and electrical components test methods

EIA RS-186-4E-1978 STANDARD TEST METHODS FOR PASSIVE ELECTRONIC CQMPONENT PARTS METHOD 4: DIELECTRIC TEST (WITHSTAND VOLTAGE)
EIA RS-186-13E-1978 STANDARD TEST METHODS FOR PASSIVE ELECTRONIC COMPONENT PARTS METHOD 13: INSULATION RESISTANCE TEST
EIA RS-186-11E-1978 STANDARD TEST METHODS FOR PASSIVE ELECTRONIC COMPONENT PARTS METHOD 11: THERMAL SHOCK IN AIR
EIA RS-186-12E-1978 STANDARD TEST METHODS FOR PASSIVE ELECTRONIC COMPONENT PARTS METHOD 12: HEAT-LIFE TEST
EIA-186-14E-1985 STANDARD TEST METHOD FOR PASSIVE ELECTRONIC COMPONENT PARTS METHOD 14: PANEL SEAL TEST
EIA RS-186-3E-1978 STANDARD TEST METHODS FOR PASSIVE ELECTRONIC COMPONENT PARTS METHOD 3: HUMIDITY (STEADY STATE-SEALED CONTAINER
EIA RS-186-E-1978 STANDARD TEST METHODS FOR PASSIVE ELECTRONIC COMPONENT PARTS GENERAL INSTRUCTIONS AND INDEX OF TESTS
EIA RS-186-9E-1978 STANDARD TEST METHODS FOR PASSIVE ELECTRONIC COMPONENT PARTS METHOD 9:s SOLDERABILITY
EIA RS-186-1E-1978 STANDARD TEST METHODS FOR PASSIVE ELECTRONIC COMPONENT PARTS METHOD 1: HUMIDITY (STEADY STATE)
EIA RS-186-5E-1978 STANDARD TEST METHODS FOR PASSIVE ELECTRONIC COMPONENT PARTS METHOD 5: SALT SPRAY (CORROSION)
EIA RS-186-8E-1978 STANDARD TEST METHODS FOR PASSIVE ELECTRONIC COMPONENT PARTS METHOD 8: VIBRATION, HIGH FREQUENCY
EIA RS-186-6E-1978 STANDARD TEST METHODS FOR PASSIVE ELECTRONIC COMPONENT PARTS METHOD 6: MECHANICAL ROBUSTNESS OF TERMINALS
EIA RS-186-10E-1978 STANDARD TEST METHODS FOR PASSIVE ELECTRONIC COMPONENT PARTS METHOD 10: EFFECT OF SOLDERING
EIA RS-186-2E-1978 STANDARD TEST METHODS FOR PASSIVE ELECTRONIC COMPONENT BARTS METHOD 2: MOISTURE RESISTANCE (CYCLING)

RO-ASRO, Electronic and electrical components test methods

STAS 12743/6-1989 Electronical components tor electronic equipments PROCEDURES FOR BASIC TESTS AND MEASURING METHODS Climatical and welding tests
STAS 12743/4-1989 Electromechanical components for electric equipment. Basic testing procedures and measuring methods. Gynamic stress tests
STAS 10003-1975 PASSIVE ELECTRON COMPONENTS Method of mcasumnent of nun linearily of resistors
STAS 8393/17-1-1970 Basic environmental testing procedures for electronic components and electronic equipment DROP AND TOPPLE Testing methods
STAS 12743/1-1991 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. General
STAS 12743/2-1989 Electromechanical components for electronic equipment BASIC TESTING PROCEDURES AND MEASURING METHODS General examination, electrical continuity and contact resistance tests insulation tests and voltage stress tests
STAS 12743/3-1989 Electromechanical components for electronic equipment BASIC TESTING PROCEDURES AND MEASURING METHODS Current-carrying capacity tests
STAS 12743/5-1989 Electromechanical components for electronic equipment BASIC TESTING PROCEDURES AND MEASURING METHODS Impact tests, static load tests, endu- rance tests and overload tests
STAS 12743/7-1989 Electromechanical components for electronic equipment BASIC TESTING PROCEDURES AND MEASURING METHODS Mechanical operating tests and sealing tests

Group Standards of the People's Republic of China, Electronic and electrical components test methods

T/ZEIIA 02-2020 Test method of electronic paste for electronic components

ECIA - Electronic Components Industry Association, Electronic and electrical components test methods

EIA-977-2017 Test Method - Electronic Passive Components Exposure to Atmospheric Sulfur
EIA-977-2016 Test Method – Electronic Passive Components Exposure to Atmospheric Sulfur
186-13E-1978 Passive Electronic Component Parts@ Test Methods for; Method 13: Insulation Resistance Test
186-11E-1978 Passive Electronic Component Parts@ Test Methods for; Method 11: Thermal Shock in Air
186-12E-1978 Passive Electronic Component Parts@ Test Methods for; Method 12: Heat-Life Test
186-9E-1978 Passive Electronic Component Parts@ Test Methods for; Method 9: Solderability
186-3E-1978 Passive Electronic Component Parts@ Test Methods for; Method 3: Humidity (Steady State-Sealed Container)
186-14E-1985 Passive Electronic Component Parts@ Test Method for; Method 14: Panel Seal Test
186-E-1978 Passive Electronic Component Parts@ Test Methods for; General Instructions and Index of Tests
186-10E-1978 Passive Electronic Component Parts@ Test Methods for; Method 10: Effect of Soldering
186-8E-1978 Passive Electronic Component Parts@ Test Methods for; Method 8: Vibration@ High Frequency
186-1E-1978 Passive Electronic Component Parts@ Test Methods for; Method 1: Humidity (Steady State)
186-2E-1978 Passive Electronic Component Parts@ Test Methods for; Method 2: Moisture Resistance (Cycling)
186-5E-1978 Passive Electronic Component Parts@ Test Methods for; Method 5: Salt Spray (Corrosion)
186-6E-1978 Passive Electronic Component Parts@ Test Methods for; Method 6: Mechanical Robustness of Terminals
186-7E-1978 Passive Electronic Component Parts@ Test Methods for; Method 7: Vibration Fatigue Test (Low Frequency@ 10 to 55 Hertz)

SCC, Electronic and electrical components test methods

NS-EN 3909:2007 Aerospace series — Test fluids and test methods for electric components and sub-assemblies
CEI EN 60068-2-82:2008 Environmental testing - Part 2-82: Tests - Test Tx: Whisker test methods for electronic and electric components
NS-EN 3909:2016 Aerospace series — Test fluids and test methods for electrical and optical components and sub-assemblies
DANSK DS/EN 3909:2016 Aerospace series – Test fluids and test methods for electrical and optical components and sub-assemblies
IEC 60512-6:1977 Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 6: Climatic tests and soldering tests
DANSK DS/EN IEC 62025-2:2019 High frequency inductive components – Non-electrical characteristics and measuring methods – Part 2: Test methods for non-electrical characteristics
DANSK DS/EN 62025-2:2005 High frequency inductive components – Non-electrical characteristics and measuring methods – Part 2: Test methods for non-electrical characteristics
BS DD IEC/PAS 62050:2004 Board level drop test method of components for handheld electronicproduc ts
DIN EN 60068-2-82 E:2017 Draft Document - Environmental testing - Part 2-82: Tests - Test XW1: Whisker test methods for electronic and electric components (IEC 91/1422/CD:2017)
IEC 60512-6:1977/COR1:1978 Corrigendum 1 - Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 6: Climatic tests and soldering tests
CEI EN 60749-35:2012 Semiconductor devices - Mechanical and climatic test methods Part 35: Acoustic microscopy for plastic encapsulated electronic components
DANSK DS/EN 60749-35:2007 Semiconductor devices - Mechanical and climatic test methods - Part 35: Acoustic microscopy for plastic encapsulated electronic components
DIN EN 62813 E:2013 Draft Document - Lithium ion capacitors for use in electric and electronic equipment - Test methods for electrical characteristics (IEC 40/2177/CD:2012)
DANSK DS/EN 62025-1:2007 High frequency inductive components - Non-electrical characteristics and measuring methods - Part 1: Fixed, surface mounted inductors for use in electronic and telecommunication equipment
IEC 60068-2-13:1966 Basic environmental testing procedures for electronic components and electronic equipment - Part 2: Tests - Test M: Low air pressure
IEC 60068-2-13:1960 Basic environmental testing procedures for electronic components and electronic equipment - Part 2: Tests - Test M: Low air pressure
IEC 60512-8:1984 Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 8: Connector tests (mechanical) and mechanical tests on contacts and terminations
IEC 60512-8:1977 Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 8: Connector tests (mechanical) and mechanical tests on contacts and terminations
IEC 60512-1:1976 Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 1: General
IEC 60512-2:1985/AMD1:1994 Amendment 1 - Electromechanical components for electronic equipment; basic testing procedures and measuring methods. Part 2: General examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests
IEC 60512-2:1976/AMD1:1983 Amendment 1 - Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 2: General examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests
IEC 60512-2:1976 Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 2: General examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests
DANSK DS/EN 60068-2-82:2007 Environmental testing – Part 2-82: Tests – Test Tx: Whisker test methods for electronic and electric components
IEC 60512-8:1984/AMD1:1985 Amendment 1 - Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 8: Connector tests (mechanical) and mechanical tests on contacts and terminations
IEC 61007:1990/AMD2:1993 Amendment 2 - Transformers and inductors for use in electronic and telecommunication equipment - Measuring methods and test procedures
IEC 61007:1990/AMD1:1993 Amendment 1 - Transformers and inductors for use in electronic and telecommunication equipment - Measuring methods and test procedures
CEI EN IEC 62025-2:2020 High frequency inductive components - Non-electrical characteristics and measuring methods Part 2: Test methods for non-electrical characteristics
CEI EN 62025-2:2005 High frequency inductive components - Non-electrical characteristics and measuring methods Part 2: Test methods for non-electrical characteristics
CEI EN 62025-1:2009 High frequency inductive components - Non-electrical characteristics and measuring methods Part 1: Fixed, surface mounted inductor for use in electronic and telecommunication equipment
IEC 60512-7:1988 Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 7: Mechanical operating tests and sealing tests
IEC 60512-7:1978 Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 7: Mechanical operating tests and sealing tests
CEI EN IEC 62024-1:2018 High frequency inductive components - Electrical characteristics and measuring methods Part 1: Nanohenry range chip inductor
CEI EN 62024-1:2009 High frequency inductive components - Electrical characteristics and measuring methods Part 1: Nanohenry range chip inductor
DIN EN IEC 62025-2 E:2019 Draft Document - High frequency inductive components - Non-electrical characteristics and measuring methods - Part 2: Test methods for non-electrical characteristics (IEC 51/1248/CD:2018); Text in German and English

Danish Standards Foundation, Electronic and electrical components test methods

DS/EN 60068-2-82:2007 Environmental testing - Part 2-82: Tests - Test Tx: Whisker test methods for electronic and electric components
DS/EN 3909:2008 Aerospace series - Test fluids and test methods for electric components and sub-assemblies
DS/EN 2591-7301:2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 7301: Electrical elements - Temperature endurance of couplers
DS/EN 2591-703:2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 703: Electrical elements - Common mode rejection of couplers
DS/EN 60512-11-1:1999 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 1: Test 11a: Climatic sequence
DS/IEC 512-6:1987 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 6: Climatic tests and soldering tests
DS/EN 2591-701:2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 701: Electrical elements - Measurement of open circuit impedance of couplers
DS/EN 2591-702:2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 702: Electrical elements - Measurement of signal distortion of couplers
DS/EN 60512-11-8:1999 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 8: Test 11 h: Sand and dust
DS/EN 2591-704:2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 704: Electrical elements - Measurement of turns ratio on a transformer used in a coupler
DS/EN 60512-23-3/Corr.1:2003 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 23-3: Test 23c: Shielding effectiveness of connectors and accessories
DS/EN 60512-23-3:2001 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 23-3: Test 23c: Shielding effectiveness of connectors and accessories
DS/EN 2591-708:2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 708: Electrical elements - Measurement of surface transfer impedance of couplers
DS/EN 2591-706:2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 706: Electrical elements - Transmission test
DS/EN 2591-709:2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 709: Electrical elements - Tensile strength of couplers
DS/EN 62025-1:2008 High frequency inductive components - Non-electrical characteristics and measuring methods - Part 1: Fixed, surface mounted inductors for use in electronic and telecommunication equipment
DS/EN 2591-705:2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 705: Electrical elements - Measurement of stub input impedance of couplers
DS/EN 60512-1-3:1998 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General examination - Section 3: Test 1c: Electrical engagement length

AENOR, Electronic and electrical components test methods

UNE-EN 60068-2-82:2007 Environmental testing -- Part 2-82: Tests - Test Tx: Whisker test methods for electronic and electric components
UNE 20606-6:1986 ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT; BASIC TESTING PROCEDURES AND MEASURING METHODS. CLIMATIC TESTS AND SOLDERING TESTS
UNE-EN 60512-11-8:2000 ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 11: CLIMATIC TESTS. SECTION 8: TEST 11H. SAND AND DUST.
UNE-EN 60512-11-1:2000 ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 11: CLIMATIC TESTS. SECTION 1: TEST 11A. CLIMATIC SEQUENCE.
UNE 20606-8/2C:1983 ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT; BASIC TESTING PROCEDURES AND MEASURING METHODS. CONNECTOR TEST (MECHANICAL) AND MECHANICAL TEST ON CONTACTS AND TERMINATIONS
UNE 20606-8:1981 ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT; BASIC TESTING PROCEDURES AND MEASURING METHODS. CONNECTOR TESTS (MECHANICAL) AND MECHANICAL TESTS ON CONTACTS AND TERMINATIONS
UNE-IEC 60512-9:2005 Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 9: Miscellaneous tests
UNE-EN 60512-23-3:2001 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods -- Part 23-3: Test 23c: Shielding effectiveness of connectors and accessories.
UNE 20606-8/1C:1982 ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT; BASIC TESTING PROCEDURES AND MEASURING METHODS. CONNECTOR (MECHANICAL) TESTS AND MECHANICAL TESTS ON CONTACTS AND TERMINATIONS
UNE-EN 60512-1-3:1999 ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 1: GENERAL EXAMINATION. SECTION 3: TEST 1C - ELECTRICAL ENGAGEMENT LENGTH

GSO, Electronic and electrical components test methods

GSO IEC 60068-2-82:2014 Environmental testing - Part 2-82: Tests - Test XW1: Whisker test methods for electronic and electric components
OS GSO IEC 60068-2-82:2014 Environmental testing - Part 2-82: Tests - Test XW1: Whisker test methods for electronic and electric components
OS GSO IEC/PAS 62162:2014 Field-induced charged-device model test method for electrostatic discharge withstand thresholds of microelectronic components
GSO IEC/PAS 62162:2014 Field-induced charged-device model test method for electrostatic discharge withstand thresholds of microelectronic components
GSO IEC 60512-11-1:2015 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 1: Test 11a - Climatic sequence
OS GSO IEC 60512-11-1:2015 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 1: Test 11a - Climatic sequence
BH GSO IEC 60512-11-1:2016 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 1: Test 11a - Climatic sequence
OS GSO IEC 60749-35:2014 Semiconductor devices - Mechanical and climatic test methods - Part 35: Acoustic microscopy for plastic encapsulated electronic components
OS GSO IEC 62025-1:2014 High frequency inductive components - Non-electrical characteristics and measuring methods - Part 1: Fixed, surface mounted inductors for use in electronic and telecommunication equipment
GSO IEC 62025-1:2014 High frequency inductive components - Non-electrical characteristics and measuring methods - Part 1: Fixed, surface mounted inductors for use in electronic and telecommunication equipment
BH GSO IEC 62025-1:2016 High frequency inductive components - Non-electrical characteristics and measuring methods - Part 1: Fixed, surface mounted inductors for use in electronic and telecommunication equipment
GSO IEC 60512-1-3:2015 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General examination - Section 3: Test 1c - Electrical engagement length
BH GSO IEC 60512-1-3:2016 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General examination - Section 3: Test 1c - Electrical engagement length
GSO IEC 60512-11-8:2015 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 8: Test 11h - Sand and dust
GSO IEC 62024-2:2013 High frequency inductive components - Electrical characteristics and measuring methods - Part 2: Rated current of inductors for DC to DC converters

未注明发布机构, Electronic and electrical components test methods

ANSI/EIA 977:2017 Test Method – Electronic Passive Components Exposure to Atmospheric Sulfur
DIN EN 62813 E:2013-01 Lithium ion capacitors for use in electric and electronic equipment - Test methods for electrical characteristics
SAE AS6171-2018 Test Methods Standard; General Requirements@ Suspect/Counterfeit@ Electrical@ Electronic@ and Electromechanical Parts

American National Standards Institute （ANSI), Electronic and electrical components test methods

ANSI/EIA 186-14E:1985 Passive Electronic Component Parts - Test Method 14, Panel Seal Test
ANSI/ASTM E1161:1996 Test Method for Radiologic Examination of Semiconductors and Electronic Components

American Society for Testing and Materials (ASTM), Electronic and electrical components test methods

ASTM F542-07 Standard Test Method for Exothermic Temperature of Encapsulating Compounds for Electronic and Microelectronic Encapsulation
ASTM E1161-95 Standard Test Method for Radiologic Examination of Semiconductors and Electronic Components
ASTM E1250-15(2020) Standard Test Method for Application of Ionization Chambers to Assess the Low Energy Gamma Component of Cobalt-60 Irradiators Used in Radiation-Hardness Testing of Silicon Electronic Devices
ASTM E1250-10 Standard Test Method for Application of Ionization Chambers to Assess the Low Energy Gamma Component of Cobalt-60 Irradiators Used in Radiation-Hardness Testing of Silicon Electronic Devices

Electronic Components, Assemblies and Materials Association, Electronic and electrical components test methods

ECA 186-4E-1978 Passive Electronic Component Parts, Test Methods for; Method 4: Dielectric Test (Withstanding Voltage)
ECA 186-13E-1978 Passive Electronic Component Parts, Test Methods for; Method 13: Insulation Resistance Test
ECA 186-11E-1978 Passive Electronic Component Parts, Test Methods for; Method 11: Thermal Shock in Air
ECA 186-E-1978 Passive Electronic Component Parts, Test Methods for; General Instructions and Index of Tests
ECA 186-9E-1978 Passive Electronic Component Parts, Test Methods for; Method 9: Solderability
ECA 186-12E-1978 Passive Electronic Component Parts, Test Methods for; Method 12: Heat-Life Test
ECA 186-5E-1978 Passive Electronic Component Parts, Test Methods for; Method 5: Salt Spray (Corrosion)
ECA 186-8E-1978 Passive Electronic Component Parts, Test Methods for; Method 8: Vibration, High Frequency
ECA 186-10E-1978 Passive Electronic Component Parts, Test Methods for; Method 10: Effect of Soldering
ECA 186-3E-1978 Passive Electronic Component Parts, Test Methods for; Method 3: Humidity (Steady State-Sealed Container)
ECA 186-14E-1985 Passive Electronic Component Parts, Test Method for; Method 14: Panel Seal Test
ECA 186-1E-1978 Passive Electronic Component Parts, Test Methods for; Method 1: Humidity (Steady State)
ECA 186-2E-1978 Passive Electronic Component Parts, Test Methods for; Method 2: Moisture Resistance (Cycling)
ECA 186-6E-1978 Passive Electronic Component Parts, Test Methods for; Method 6: Mechanical Robustness of Terminals

German Institute for Standardization, Electronic and electrical components test methods

DIN EN 3909:2016-10 Aerospace series - Test fluids and test methods for electrical and optical components and sub-assemblies; German and English version EN 3909:2016
DIN EN 60068-2-82:2007 Environmental testing - Part 2-82: Tests - Test Tx: Whisker test methods for electronic and electric components (IEC 60068-2-82:2007); German version EN 60068-2-82:2007
DIN EN 62813:2015-09 Lithium ion capacitors for use in electric and electronic equipment - Test methods for electrical characteristics (IEC 62813:2015); German version EN 62813:2015
DIN EN 60512-11-8:1999-07 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests; Section 8: Test 11h: Sand and dust (IEC 60512-11-8:1995); German version EN 60512-11-8:1999 / Note: Applies in conjunction...
DIN EN IEC 62025-2:2021-11 High frequency inductive components - Non-electrical characteristics and measuring methods - Part 2: Test methods for non-electrical characteristics (IEC 62025-2:2019); German version EN IEC 62025-2:2019 / Note: DIN EN 62025-2 (2005-08) remains valid a...
DIN EN 60749-35:2007-03 Semiconductor devices - Mechanical and climatic test methods - Part 35: Acoustic microscopy for plastic encapsulated electronic components (IEC 60749-35:2006); German version EN 60749-35:2006
DIN EN 62025-1:2008-02 High frequency inductive components - Non-electrical characteristics and measuring methods - Part 1: Fixed, surface mounted inductor for use in electronic and telecommunication equipment (IEC 62025-1:2007); German version EN 62025-1:2007 / Note: DIN EN...
DIN EN 60512-11-1:1999 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests; Section 1: Test 11a: Climatic sequence (IEC 60512-11-1:1995); German version EN 60512-11-1:1999
DIN EN 60512-11-8:1999 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests; Section 8: Test 11h: Sand and dust (IEC 60512-11-8:1995); German version EN 60512-11-8:1999
DIN EN 2591:1992-12 Aerospace series; elements of electrical and optical connection; test methods; general; german version EN 2591:1992
DIN EN 60512-20-2:2001-04 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 20-2: Test: 20b: Flammability tests; Fireproofness (IEC 60512-20-2:2000); German version EN 60512-20-2:2000
DIN EN 60749-35:2007 Semiconductor devices - Mechanical and climatic test methods - Part 35: Acoustic microscopy for plastic encapsulated electronic components (IEC 60749-35:2006); German version EN 60749-35:2006
DIN EN 3909:2008 Aerospace series - Test fluids and test methods for electric components and sub-assemblies; German and English version EN 3909:2007
DIN EN 2591-210:1998 Aerospace series - Elements of electrical and optical connection; test methods - Part 210: Electrical overload; German version EN 2591-210:1998

ES-UNE, Electronic and electrical components test methods

UNE-EN 3909:2016 Aerospace series - Test fluids and test methods for electrical and optical components and sub-assemblies (Endorsed by AENOR in July of 2016.)
UNE-EN 2591-706:2001 Aerospace series - Elements of electrical and optical connection - Test methods - Part 706: Electrical elements - Transmission test. (Endorsed by AENOR in April of 2002.)
UNE-EN IEC 62025-2:2019 High frequency inductive components - Non-electrical characteristics and measuring methods - Part 2: Test methods for non-electrical characteristics (Endorsed by Asociación Española de Normalización in December of 2019.)
UNE-EN 2591-7301:2001 Aerospace series - Elements of electrical and optical connection - Test methods - Part 7301: Electrical elements - Temperature endurance of couplers. (Endorsed by AENOR in April of 2002.)
UNE-EN 2591-702:2001 Aerospace series - Elements of electrical and optical connection - Test methods - Part 702: Electrical elements - Measurement of signal distortion of couplers. (Endorsed by AENOR in April of 2002.)
UNE-EN 2591-709:2001 Aerospace series - Elements of electrical and optical connection - Test methods - Part 709: Electrical elements - Tensile strength of couplers. (Endorsed by AENOR in April of 2002.)
UNE-EN 2591-703:2001 Aerospace series - Elements of electrical and optical connection - Test methods - Part 703: Electrical elements - Common mode rejection of couplers. (Endorsed by AENOR in April of 2002.)
UNE-EN 60749-35:2006 Semiconductor devices - Mechanical and climatic test methods -- Part 35: Acoustic microscopy for plastic encapsulated electronic components (IEC 60749-35:2006) (Endorsed by AENOR in January of 2007.)
UNE-EN 2591-704:2001 Aerospace series- Elements of electrical and optical connection- Test methods- Part 704: Electrical elements- Measurement of turns ratio on a transformer used in a coupler. (Endorsed by AENOR in April of 2002.)
UNE-EN 2591-708:2001 Aerospace series - Elements of electrical and optical connection - Test methods - Part 708: Electrical elements - Measurement of surface transfer impedance of coupleurs. (Endorsed by AENOR in April of 2002.)
UNE-EN 2591-705:2001 Aerospace series- Elements of electrical and optional connection- Test methods- Part 705: Electrical elements- Measurement of stub input impendance of couplers. (Endorsed by AENOR in April of 2002.)
UNE-EN 2591-707:2001 Aerospace series - Elements of electrical and optical connection - Test methods - Part 707: Electrical elements - Measurement of characteristic impedance of a bus or a stub terminator. (Endorsed by AENOR in April of 2002.)
UNE-EN 62025-1:2007 High frequency inductive components - Non-electrical characteristics and measuring methods -- Part 1: Fixed, surface mounted inductors for use in electronic and telecommunication equipment (IEC 62025-1:2007). (Endorsed by AENOR in December of 2007.)

European Committee for Electrotechnical Standardization（CENELEC）, Electronic and electrical components test methods

EN 60068-2-82:2007 Environmental testing - Part 2-82: Tests - Test Tx: Whisker test methods for electronic and electric components
EN IEC 60068-2-82:2019 Environmental testing - Part 2-82: Tests - Test Xw1: Whisker test methods for components and parts used in electronic assemblies
EN 62813:2015 Lithium ion capacitors for use in electric and electronic equipment - Test methods for electrical characteristics
EN 60512-11-8:1999 Electromechanical components for electronic equipment Basic testing procedures and measuring methods Part 11: Climatic tests Section 8: Test 11h - Sand and dust
EN 60749-35:2006 Semiconductor devices Mechanical and climatic test methods Part 35: Acoustic microscopy for plastic encapsulated electronic components

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Electronic and electrical components test methods

JEDEC JESD22-C101D-2008 Field-Induced Charged-Device Model Test Method for Electrostatic- Discharge-Withstand Thresholds of Microelectronic Components
JEDEC JESD22-C101F-2013 Field-Induced Charged-Device Model Test Method for Electrostatic-Discharge-Withstand Thresholds of Microelectronic Components
JEDEC JESD22-B111-2003 Board Level Drop Test Method of Components for Handheld Electronic Products

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Electronic and electrical components test methods

IEEE C62.31-2006 Test Methods for Low- Voltage Gas-Tube Surge-Protective Device Components

Association Francaise de Normalisation, Electronic and electrical components test methods

NF C96-009:1989 Electronic Components Semiconductor devices Mechanical and climatic test methods
NF EN 2591-709:2002 Aerospace series - Electrical and optical connection elements - Test methods - Part 709: electrical elements - Tensile resistance of couplers
NF C93-400:1988 Electronic Components Connecting devices Basic testing procedures and measuring methods List of tests
NF EN 2591-706:2002 Aerospace series - Electrical and optical connection components - Test methods - Part 706: electrical components - Transmission test
NF EN 2591-7301:2002 Aerospace series - Electrical and optical connection components - Test methods - Part 7301: electrical components - Temperature endurance of couplers
NF EN 2591-702:2002 Aerospace series - Electrical and optical connection components - Test methods - Part 702: electrical components - Measurement of coupler signal distortion
NF EN 2591-703:2002 Aerospace series - Electrical and optical connection components - Test methods - Part 703: electrical components - Common mode rejection of couplers
NF C20-700-2-82*NF EN IEC 60068-2-82:2019 Environmental testing - Part 2-82 : tests - Test Xw1 : whisker test methods for components and parts used in electronic assemblies
NF C20-700-2-82*NF EN 60068-2-82:2013 Environmental testing - Part 2-82 : tests - Test XW1 : whisker test methods for electronic and electric components
NF EN 60749-35:2006 Dispositifs à semiconducteurs - Méthodes d'essai climatiques et mécaniques - Partie 35 : microscopie acoustique pour composants électroniques à boîtier plastique
NF C93-400:1985 Electronic components. Connecting devices. Basic testing procedures and measuring methods.
NF L59-716*NF EN 3909:2016 Aerospace series - Test fluids and test methods for electrical and optical components and sub-assemblies
NF EN 2591-708:2002 Aerospace series - Electrical and optical connection elements - Test methods - Part 708: electrical elements - Measurement of the surface transfer impedance of couplers
NF EN 2591-705:2002 Aerospace series - Electrical and optical connection elements - Test methods - Part 705: electrical elements - Measurement of the input impedance of the coupler branch
NF C93-113*NF EN 62813:2015 Lithium ion capacitors for use in electric and electronic equipment - test methods for electrical characteristics
NF EN 2591-701:2002 Aerospace series - Electrical and optical connection components - Test methods - Part 701: electrical components - Measurement of the impedance of couplers in open circuit
NF EN 3909:2016 Série aérospatiale - Fluides d'essais et méthodes d'essai pour composants et sous- ensembles électriques et optiques
NF EN IEC 62025-2:2019 High frequency inductive components - Non-electrical characteristics and measurement methods - Part 2: test methods for non-electrical characteristics
FD R13-432:1996 Road vehicles. Electrical and electronic connections. Test methods.
NF EN 60512-11-8:1999 Electromechanical components for electronic equipment - Basic test procedures and measurement methods - Part 11: climatic tests. Section 8: 11h test: sand and dust
NF EN 12192-2:1999 Electromechanical components for electronic equipment - Basic test procedures and measurement methods - Part 11: climatic tests. Section 8: 11h test: sand and dust
NF C93-190:1983 Electronic components. Fixed capacitors for radio interference suppression. Selection of methods of test and general requirements.
NF EN 2591-308:1998 Aerospace series - Electrical and optical connection elements. Test methods - Part 308: sand and dust
NF L54-002-160*NF EN 2591-704:2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 704 : electrical elements - Measurement of turns ratio on a transformer used in a coupler
NF C93-400-11-1*NF EN 60512-11-1:1999 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 11 : climatic tests. Section 1 : test 11a. Climatic sequence.
NF L54-002-157*NF EN 2591-701:2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 701 : electrical elements - Measurement of open circuit impedance of couplers.
NF EN 2591-210:1998 Aerospace series - Electrical and optical connection elements. Test methods - Part 210: electrical overload
NF L54-002-158*NF EN 2591-702:2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 702 : electrical elements - Measurement of signal distortion of couplers

Lithuanian Standards Office , Electronic and electrical components test methods

LST EN 3909-2008 Aerospace series - Test fluids and test methods for electric components and sub-assemblies
LST EN 60068-2-82-2007 Environmental testing - Part 2-82: Tests - Test Tx: Whisker test methods for electronic and electric components (IEC 60068-2-82:2007)
LST EN 2591-7301-2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 7301: Electrical elements - Temperature endurance of couplers
LST EN 2591-703-2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 703: Electrical elements - Common mode rejection of couplers
LST EN 2591-702-2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 702: Electrical elements - Measurement of signal distortion of couplers
LST EN 2591-701-2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 701: Electrical elements - Measurement of open circuit impedance of couplers
LST EN 2591-704-2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 704: Electrical elements - Measurement of turns ratio on a transformer used in a coupler
LST EN 2591-708-2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 708: Electrical elements - Measurement of surface transfer impedance of couplers
LST EN 2591-706-2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 706: Electrical elements - Transmission test
LST EN 60512-11-1-2001 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 11: Climatic tests - Section 1: Test 11a: Climatic sequence (IEC 60512-11-1:1995)
LST EN 2591-709-2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 709: Electrical elements - Tensile strength of couplers
LST EN 2591-705-2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 705: Electrical elements - Measurement of stub input impedance of couplers
LST EN 62025-2-2005 High frequency inductive components. Non-electrical characteristics and measuring methods. Part 2: Test methods for non-electrical characteristics (IEC 62025-2:2005)
LST EN 60512-11-8-2001 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 11: Climatic tests. Section 8: Test 11h: Sand and dust (IEC 60512-11-8:1995)

工业和信息化部, Electronic and electrical components test methods

SJ/T 11769-2020 General requirements for testing methods of low-frequency noise parameters of electronic components
SJ/T 11705-2018 Ground and power supply impedance test methods for microelectronic device packages

GOSTR, Electronic and electrical components test methods

GOST R IEC 62813-2020 Lithium ion capacitors for use in electric and electronic equipment. Test methods for electrical characteristics

IEC - International Electrotechnical Commission, Electronic and electrical components test methods

PAS 62162-2000 Field-Induced Charged-Device Model Test Method for Electrostatic Discharge Withstand Thresholds of Microelectronic Components (Edition 1.0)
IEC 60512-2/AMD1:1985 Amendment 1 Electromechanical Components for Electronic Equipment; Basic Testing Procedures and Measuring Methods Part 2: General Examination@ Electrical Continuity and Contact Resistance Tests@ Insulation Tests and Voltage Stress Tests (Edition 2.0)
PAS 62050-2004 Board level drop test method of components for handheld electronic products (Edition 1.0)

Professional Standard - Aviation, Electronic and electrical components test methods

HB 8424-2014 Leak test method for sealing of aviation components

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Electronic and electrical components test methods

PREN 2591-G2-1993 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part G2 - Electrical Elements Measurement of Signal Distortion of Couplers
PREN 2591-G6-1993 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part G6 - Electrical Elements Transmission Test (Edition P 1)
PREN 2591-G1-1993 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part G1 - Electrical Elements Measurement of Open Circuit Impedance of Couplers (Edition P 1)
PREN 2591-G9-1993 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part G9 - Electrical Elements Tensile Strength of Couplers (Edition P 1)
PREN 2591-G3-1993 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part G3 - Electrical Elements Common Mode Rejection of Couplers (Edition P 1)
PREN 2591-G5-1993 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part G5 - Electrical Elements Measurement of Stub Input Impedance of Couplers (Edition P 1)
PREN 2591-G8-1993 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part G8 - Electrical Elements Measurement of Surface Transfer Impedance of Couplers (Edition P 1)
PREN 3909-2005 Aerospace Series Test Fluids for Electric Components and Sub-Assemblies (Edition P 2)
PREN 3909-1995 Aerospace Series Test Fluids for Electric Components and Sub-Assemblies (Edition P 1)

KR-KS, Electronic and electrical components test methods

KS C IEC 62025-2-2018(2023) High frequency inductive components — Non-electrical characteristics and measuring methods — Part 2: Test methods for non-electrical characteristics
KS C IEC 62025-2-2018 High frequency inductive components — Non-electrical characteristics and measuring methods — Part 2: Test methods for non-electrical characteristics
KS C IEC 62025-1-2018(2023) High frequency inductive components — Non-electrical characteristics and measuring methods — Part 1: Fixed, surface mounted inductors for use in electronic and telecommunication equipment

Japanese Industrial Standards Committee (JISC), Electronic and electrical components test methods

JIS C 62813:2016 Lithium ion capacitors for use in electric and electronic equipment -- Test methods for electrical characteristics
JIS C 60068-2-82:2009 Environmental testing -- Part 2-82: Tests -- Test XW1: Whisker test methods for electronic and electric components
JIS C 62024-1:2022 High frequency inductive components -- Electrical characteristics and measuring methods -- Part 1: Nanohenry range chip inductor

RU-GOST R, Electronic and electrical components test methods

GOST R IEC 60068-2-82-2017 Environmental testing. Part 2-82. Tests. Test XW1: Whisker test methods for electronic and electric components

International Electrotechnical Commission (IEC), Electronic and electrical components test methods

IEC 60512-6:1984 Electromechanical components for electronic equipment; basic testing procedures and measuring methods. Part 6 : Climatic tests and soldering tests
IEC 62025-2:2019 High frequency inductive components - Non-electrical characteristics and measuring methods - Part 2: Test methods for non-electrical characteristics
IEC 62025-2:2019 RLV High frequency inductive components - Non-electrical characteristics and measuring methods - Part 2: Test methods for non-electrical characteristics
IEC 60068-2-82:2007 Environmental testing - Part 2-82: Tests - Test XW<(Index)1>: Whisker test methods for electronic and electric components
IEC 60512-11-1:1995 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 1: Test 11a: Climatic sequence
IEC 60512-23-3:2000/COR1:2003 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 23-3: Test 23c: Shielding effectiveness of connectors and accessories
IEC 60749-35:2006 Semiconductor devices - Mechanical and climatic test methods - Part 35: Acoustic microscopy for plastic encapsulated electronic components
IEC 60747-5-3:1997 Discrete semiconductor devices and integrated circuits - Part 5-3: Optoelectronic devices - Measuring methods

DE-VDA, Electronic and electrical components test methods

VDA 320-2014 Electric and Electronic Components in Motor Vehicles 48 V On-Board Power Supply - Requirements and Tests
VDA 320-2015 Electric and Electronic Components in Motor Vehicles 48 V On-Board Power Supply Requirements and Tests

TR-TSE, Electronic and electrical components test methods

TS 2094-1975 BASIC ENVIRONMENTAL TESTING PROCEDURES FOR ELECTRONIC COMPONENTS AND ELECTRONIC EQUIPMENT TEST M : LOW AIR PRES'SURE
TS 2507-1977 Measurements Of The Electrical Properties Of Electronic Tubes And Vaives Part 17 : Methods Of Measurement Of Gasfilled Tubes And Vaives
TS 2598-1977 MEASUREMENTS OF THE ELECTRICAL PROPERTffiS OF ELECTRONIC TUBES AND VALVESPART 20 , METHODS OF MEASUREMENT OF THYRATRON PULSE MODULATORS
TS 1876-1975 BASIC ENVIRONMENTAL TESTING PROCEDURES FOR ELECTRONIC COMPONENTS AND ELECTRONIC EQUIPMENT PART 1-GENERAL
TS 2506-1977 MEASUREMENTS OF THE ELECTRICAL PROPERTIES OF ELECTRONIC TUBES AND VALVES PART 16 : METHODS OF MEASUREMENT FPROPERTIES OF ELECTRONIC TUBES
TS 2599-1977 MEASUREMENTS OF THE ELECTRICAL PROPERTIES OF ELECTRONIC TUBES AND VALVES PART 21 : METHODS OF MEASUREMENT OF GROSS-MOD?LATION ?N ELECTRONIC TUBES AND VALVES

European Committee for Standardization (CEN), Electronic and electrical components test methods

EN 2591-7301:2001 Aerospace Series - Elements of Electrical and Optical Connection - Test Methods - Part 7301: Electrical Elements - Temperature Endurance of Couplers
EN 3909:2007 Aerospace series - Test fluids and test methods for electric components and sub-assemblies

SAE - SAE International, Electronic and electrical components test methods

SAE AS6171-2016 Test Methods Standard; General Requirements@ Suspect/Counterfeit@ Electrical@ Electronic@ and Electromechanical Parts

Society of Automotive Engineers (SAE), Electronic and electrical components test methods

SAE AS6171A-2018 Test Methods Standard; General Requirements, Suspect/Counterfeit, Electrical, Electronic, and Electromechanical Parts

IN-BIS, Electronic and electrical components test methods

IS 9185 Pt.1-1979 Durability (lifetime) testing of electronic and electrical components Part Ⅰ Thermal resistance

Professional Standard - Aerospace, Electronic and electrical components test methods

QJ 2863-1996 Particle impact noise detection (PIND) requirements and methods for aerospace electronic components

CZ-CSN, Electronic and electrical components test methods

CSN IEC 512-9:1994 Soub?§n? s textem kapitoly 3 t?to normy plat? ?SN EN 60512-17-3 (35 4055) z kv?tna 2011, kter? text uveden? kapitoly zcela nahrad? od 2013-09-01.
CSN IEC 512-8:1994 Electromechanical components for electronic equipment, basic testing procedures and measuring methods. Part 8: Connector tests (mechanical) and mechanical tests on contacts and terminations
CSN 35 4055 Cast.3-1984 Electromechanical components forelectronic equipment. Contact resistance - Millivolt level method and specified test current method

North Atlantic Treaty Organization Standards Agency, Electronic and electrical components test methods

STANAG 3516-2003 ELECTROMAGNETIC INTERFERENCE, TEST METHODS FOR AIRCRAFT ELECTRICAL AND ELECTRONIC EQUIPMENT