ZH
RU
ES
Mark the sample
Mark the sample, Total:499 items.
In the international standard classification, Mark the sample involves: Graphical symbols, Electricity. Magnetism. Electrical and magnetic measurements, On-board equipment and instruments, Products of the textile industry, Test conditions and procedures in general, Analytical chemistry, Graphic technology, Non-destructive testing, Paint ingredients, Testing of metals, Wood-based panels, Construction materials, Inorganic chemicals, Raw materials for rubber and plastics, Iron and steel products, Environmental protection, Refractories, Soil quality. Pedology, Diagnostic, maintenance and test equipment, Plastics, Gears, Paints and varnishes, Edible oils and fats. Oilseeds, PAINT AND COLOUR INDUSTRIES, Wood, sawlogs and sawn timber, Surface treatment and coating, Sterilization and disinfection, Leather technology, Standardization. General rules, Textile fibres, Paint coating equipment, Materials for the reinforcement of composites, Earthworks. Excavations. Foundation construction. Underground works, Nuclear energy engineering, Ferrous metals, Road vehicles in general, Coals, Information sciences. Publishing, Water quality, Non-ferrous metals, Road engineering, Equipment for entertainment, Mechanical testing, Insulating materials, Protection of and in buildings, Fuels, Powder metallurgy, Fertilizers, Products of the chemical industry, Cases. Boxes. Crates, Structures of buildings, Medical equipment, Metalliferous minerals, Acoustics and acoustic measurements, Electronic display devices, Welding, brazing and soldering, Magnetic materials, Air quality, Rubber and plastics products, Glass, Cutting tools, Waxes, bituminous materials and other petroleum products, Protection against fire, Adhesives.
Taiwan Provincial Standard of the People's Republic of China, Mark the sample
- CNS 14707-2002 Symbol mark for paper pattern
- CNS 6685-1980 Preparation, Marking and Measuring of Fabric Specimens in Tests for Determination of Dimensional Change
- CNS 10034-2002 Packaging-Complete，filled transport packages-identification of parts when testing
Professional Standard - Electron, Mark the sample
RO-ASRO, Mark the sample
- STAS 11176/2-1984 SAMPLING OSCILLOSCOPES Methods of test
- SR EN 326-1-1996 Wood - based panels-Sampling, cutting and inspection Part 1: Sampling and cutting of test pieces expresions of test results
- STAS 6675/3-1976 UNPLASTICIZED POLYVI- NYL CHLORIDE PIPES Methods of test General indications
Defense Logistics Agency, Mark the sample
National Metrological Verification Regulations of the People's Republic of China, Mark the sample
- JJG(电子) 03005-1988 SQ-27 Sampling Oscilloscope Trial Verification Rules
- JJG 1147-2018 Charpy V-notch Reference Test Pieces
- JJG(机械) 87-1992 Verification rules for standard samples of abrasive magnetic materials
- JJG 354-1984 Verification Regulation of Standard Sample of the Magnetic Properties of Soft Magnetic Materials
- JJG 405-1986 Verification Regulation of the Standard Specimen of Magnetic Sheet and Strip
- JJG 406-1986 Verification Regulation for Standard Sample of Feebly Megnetic Materials
- JJG 407-1986 Verification Regulation of the Standard Specimen of Electrical Iron
International Electrotechnical Commission (IEC), Mark the sample
- IEC 61115:1992 Expression of performance of sample handling systems for process analyzers
- IEC 61747-40-5:2018 Liquid crystal display devices - Part 40-5: Mechanical testing of display cover glass for mobile devices - Strength against dynamic impact by a sharp object with the specimen rigidly supported
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Mark the sample
- GB/T 19768-2005 Process Analyzer Sample Handling System Performance Representation
- GB/T 19768-2005 Process Analyzer Sample Handling System Performance Representation
- GB/T 19768-2005 Process Analyzer Sample Handling System Performance Representation
- GB/T 41598-2022 Graphic technology—Displays for colour proofing—Characteristics
- GB/T 2918-1998 Plastics--Standard atmospheres for conditioning and testing
- GB/T 2918-2018 Standard environment for conditioning and testing of plastic specimens
- GB/T 13268-1991 Atmospheric Air--Test Dust Standard Sample--Loess dust
- GB/T 13269-1991 Atmospheric Air--Test Dust Standard Sample--Fly Ash
- GB 13268-1991 Atmospheric test dust standard sample loess dust
- GB 13269-1991 Atmospheric test dust standard sample coal fly ash
- GB/T 14454.14-1993 Aromatics. Preparation of standard solution, test solution and indicator solution
- GB/T 14454.14-2008 Fragrance/Flavor substances.Preparation of standard solution
,test solution and indicator solution
- GB/T 8432-1987 Humidity test control for colour fastness to light
- GB/T 13270-1991 Aemospheric air--Test dust standand sample--Simulated atmospheric dust
- GB 13270-1990 Atmospheric air—Test dust standard sample—Simulated atmospheric dust
- GB 8432-1987 Humidity test control for colour fastness to light
- GB 13270-1991 Atmospheric test dust standard sample simulates atmospheric dust
German Institute for Standardization, Mark the sample
- DIN EN 61115:1994 Expression of performance of sample handling systems for process analyzers (IEC 61115:1992); German version EN 61115:1993
- DIN 53235-2:2005 Testing of pigments - Tests on specimens having standard depth of shade - Part 2: Adjustment of specimens to standard depth of shade
- DIN 58405-3:1972 Spur Gear Drives for Fine Mechanics; Indication in Drawings, Examples for Calculation
- DIN EN 13892-1:2003 Methods of test for screed materials - Part 1: Sampling, making and curing specimens for test; German version EN 13892-1:2002
- DIN 820-2 Bb.2:2000 Standardization - Part 2: Presentation of standards; examples for presentation of figures, tables and part lists
- DIN 53235-1:2005 Testing of pigments - Tests on specimens having standard depth of shade - Part 1: Standard depths of shade
- DIN EN 22313:1992 Textiles; determination of the recovery form creasing of a horizontally folded specimen by measuring the angle of recovery (ISO 2313:1972); german version EN 22313:1992
- DIN 53235-2:2005-06 Testing of pigments - Tests on specimens having standard depth of shade - Part 2: Adjustment of specimens to standard depth of shade
- DIN EN 14407:2004 Water quality - Guidance standard for the identification, enumeration and interpretation of benthic diatom samples from running waters; German version EN 14407:2004
- DIN EN 13459:2011-12 Road marking materials - Sampling from storage and testing; German version EN 13459:2011
Professional Standard - Agriculture, Mark the sample
- 356药典 三部-2020 Reagent test solution standard 8005 indicator and indicator solution
- 325药典 三部-2015 Reagent Test Solution Standard 8005 General Rules for Indicators and Indicator Solutions 183
- 307药典 四部-2015 8000 Reagents and Standard Substances 8005 Indicators and Indicator Solutions
- 322药典 四部-2020 8000 Reagents and Standard Substances 8005 Indicators and Indicator Solutions
- 870兽药典 一部-2015 Appendix Contents 8000 Reagents and Standard Materials 8005 Indicators and Indicator Solutions
- 840兽药典 二部-2015 Appendix Contents 8000 Reagents and Standard Materials 8005 Indicators and Indicator Solutions
- GB 2918-1982 Standard environment for conditioning and testing of plastic specimens
- GB/T 10739-1989 Standard Atmospheres for Pulp, Paper, and Board Specimen Handling and Testing
Japanese Industrial Standards Committee (JISC), Mark the sample
- JIS Z 2343:1992 Method for liquid penetrant testing and classification of the indication
- JIS B 7740:1990 Standard specimens for Charpy impact testing machine
- JIS K 7200:1986 Standard reference test specimens for calibrating a laboratory light exposure apparatus
- JIS B 7740:1999 Charpy pendulum impact test -- Reference test pieces for verification of testing machines
Professional Standard - Machinery, Mark the sample
- JB/T 6854-1993 Performance representation of sample handling systems for process analytical instruments
电子工业部, Mark the sample
- SJ/T 10293-1991 General technical conditions and test methods for sampling oscilloscopes
Danish Standards Foundation, Mark the sample
- DS/EN 61115:1994 Expression of performance of sample handling systems for process analyzers
- DS/EN 13459:2012 Road marking materials - Sampling from storage and testing
Association Francaise de Normalisation, Mark the sample
BE-NBN, Mark the sample
- NBN-EN 131-2-1993 Ladders. Requirements, testing, marking
- NBN-EN 417-1993 Non-refillable metallic gas cartridges for liquefied petroleum gases, with or without a valve, for use with portable appliances - Construction, inspection, testing and marking
- NBN-ISO 7361:1992 Performance standards in building - Presentation of performance levels of facades made of same-source components
- NBN-EN 136-1991 Respiratory protective devices - Full-face masks - Requirements, testing, marking
American Society for Testing and Materials (ASTM), Mark the sample
- ASTM D5810-96(2006) Standard Guide for Spiking into Aqueous Samples
- ASTM D5810-96(2001) Standard Guide for Spiking into Aqueous Samples
- ASTM D5810-96 Standard Guide for Spiking into Aqueous Samples
- ASTM D5810-96(2011) Standard Guide for Spiking into Aqueous Samples
- ASTM E1584-00 Standard Test Method for Assay of Nitric Acid
- ASTM E1584-00(2005)e1 Standard Test Method for Assay of Nitric Acid
- ASTM D1485-07(2011) Standard Practice for Rubber from Natural Sourcesmdash;Sampling and Sample Preparation
- ASTM A1067/A1067M-12 Standard Specification for Test Coupons for Steel Castings
- ASTM A1067/A1067M-12a Standard Specification for Test Coupons for Steel Castings
- ASTM A1067/A1067M-12a(2018) Standard Specification for Test Coupons for Steel Castings
- ASTM C179-85(1999)e1 Standard Test Method for Drying and Firing Linear Change of Refractory Plastic and Ramming Mix Specimens
- ASTM D5451-93(2008) Standard Practice for Sampling Using a Trier Sampler
- ASTM C1799/C1799M-19 Standard Guide to Dimension Stone Test Specimen Sampling and Preparation
- ASTM C1799/C1799M-22 Standard Guide to Dimension Stone Test Specimen Sampling and Preparation
- ASTM C1799/C1799M-22e1 Standard Guide to Dimension Stone Test Specimen Sampling and Preparation
- ASTM C1799/C1799M-14 Standard Guide to Dimension Stone Test Specimen Sampling and Preparation
- ASTM C42/C42M-99 Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
- ASTM C42/C42M-03 Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
- ASTM C42/C42M-04 Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
- ASTM C42/C42M-16 Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
- ASTM E3-11 Standard Guide for Preparation of Metallographic Specimens
- ASTM D5451-21 Standard Practice for Sampling Using a Trier Sampler
- ASTM D5451-93(2001) Standard Practice for Sampling Using a Trier Sampler
- ASTM D5451-93(2012) Standard Practice for Sampling Using a Trier Sampler
- ASTM D5451-93(2016) Standard Practice for Sampling Using a Trier Sampler
- ASTM C42/C42M-10 Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
- ASTM C42/C42M-12 Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
- ASTM C42/C42M-13 Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
- ASTM D1485-86(1997)e1 Standard Test Methods for Rubber from Natural Sources-Sampling and Sample Preparation
- ASTM D143-21 Standard Test Methods for Small Clear Specimens of Timber
- ASTM D802-97 Standard Test Methods for Sampling and Testing Pine Oils
- ASTM D802-02 Standard Test Methods for Sampling and Testing Pine Oils
- ASTM C1019-00be1 Standard Test Method for Sampling and Testing Grout
- ASTM C1019-07 Standard Test Method for Sampling and Testing Grout
- ASTM C1019-05 Standard Test Method for Sampling and Testing Grout
- ASTM C1019-03 Standard Test Method for Sampling and Testing Grout
- ASTM C1019-02 Standard Test Method for Sampling and Testing Grout
- ASTM C1019-09 Standard Test Method for Sampling and Testing Grout
- ASTM D802-02(2009) Standard Test Methods for Sampling and Testing Pine Oils
- ASTM C1019-11 Standard Test Method for Sampling and Testing Grout
- ASTM C1019-18 Standard Test Method for Sampling and Testing Grout
- ASTM C1019-18e1 Standard Test Method for Sampling and Testing Grout
- ASTM C1019-00b Standard Test Method for Sampling and Testing Grout
- ASTM D802-02(2022) Standard Test Methods for Sampling and Testing Pine Oils
- ASTM D802-02(2017) Standard Test Methods for Sampling and Testing Pine Oils
- ASTM D802-02(2013) Standard Test Methods for Sampling and Testing Pine Oils
- ASTM C1019-14 Standard Test Method for Sampling and Testing Grout
- ASTM C1019-16 Standard Test Method for Sampling and Testing Grout
- ASTM D233-13 Standard Test Methods of Sampling and Testing Turpentine
- ASTM D143-14 Standard Test Methods for Small Clear Specimens of Timber
- ASTM C1019-13 Standard Test Method for Sampling and Testing Grout
- ASTM E3-01(2007) Standard Guide for Preparation of Metallographic Specimens
- ASTM E3-95 Standard Practice for Preparation of Metallographic Specimens
- ASTM D1978-91(2008) Standard Guide for Analysis of Electrocoat Bath Samples
- ASTM D5810-96(2015) Standard Guide for Spiking into Aqueous Samples&x2009;
- ASTM D2347-00 Standard Test Method for Measuring Area of Leather Test Specimens
- ASTM D2347-00(2005) Standard Test Method for Measuring Area of Leather Test Specimens
- ASTM D1813-00(2005) Standard Test Method for Measuring Thickness of Leather Test Specimens
- ASTM D1813-00 Standard Test Method for Measuring Thickness of Leather Test Specimens
- ASTM D233-02 Standard Test Methods of Sampling and Testing Turpentine
- ASTM D233-08 Standard Test Methods of Sampling and Testing Turpentine
- ASTM D801-02(2009) Standard Test Methods for Sampling and Testing Dipentene
- ASTM D1813-00(2010) Standard Test Method for Measuring Thickness of Leather Test Specimens
- ASTM D233-12 Standard Test Methods of Sampling and Testing Turpentine
- ASTM D801-02(2017) Standard Test Methods for Sampling and Testing Dipentene
- ASTM D801-02(2022) Standard Test Methods for Sampling and Testing Dipentene
- ASTM D143-22 Standard Test Methods for Small Clear Specimens of Timber
- ASTM D1813-13(2023) Standard Test Method for Measuring Thickness of Leather Test Specimens
- ASTM D233-13(2022) Standard Test Methods of Sampling and Testing Turpentine
- ASTM D1813-13(2017) Standard Test Method for Measuring Thickness of Leather Test Specimens
- ASTM D1813-13 Standard Test Method for Measuring Thickness of Leather Test Specimens
- ASTM D801-02(2013) Standard Test Methods for Sampling and Testing Dipentene
- ASTM D2590-98(2006) Standard Test Method for Sampling Chrysotile Asbestos
- ASTM E1558-99(2004) Standard Guide for Electrolytic Polishing of Metallographic Specimens
- ASTM E1558-99 Standard Guide for Electrolytic Polishing of Metallographic Specimens
- ASTM D2590/D2590M-98(2019) Standard Test Method for Sampling Chrysotile Asbestos
- ASTM E1558-09(2014) Standard Guide for Electrolytic Polishing of Metallographic Specimens
- ASTM D7775-21 Standard Guide for Measurements on Small Graphite Specimens
- ASTM D2590/D2590M-98(2011)e1 Standard Test Method for Sampling Chrysotile Asbestos
- ASTM E1558-09 Standard Guide for Electrolytic Polishing of Metallographic Specimens
- ASTM D1586-11 Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils
- ASTM D5139-90(1996) Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants
- ASTM D5139-19 Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants
- ASTM D197-87(1994)e1 Standard Test Method for Sampling and Fineness Test of Pulverized Coal
- ASTM D1234-85(1995) Standard Test Method of Sampling and Testing Staple Length of Grease Wool
- ASTM E1077-91(1997) Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens
- ASTM E1077-01e1 Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens
- ASTM D143-09 Standard Test Methods for Small Clear Specimens of Timber
- ASTM E1077-14(2021) Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens
- ASTM D197-19 Standard Test Method for Sampling and Fineness Test of Pulverized Coal
- ASTM D233-13(2017) Standard Test Methods of Sampling and Testing Turpentine
- ASTM D1632-06 Standard Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory
- ASTM D1632-96 Standard Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory
- ASTM C617-09 Standard Practice for Capping Cylindrical Concrete Specimens
- ASTM C163-05 Standard Practice for Mixing Thermal Insulating Cement Samples
- ASTM F1932/F1932M-98(2018) Standard Test Method for Measuring Sleeping Bag Loft
- ASTM E1253-21 Standard Guide for Reconstitution of Charpy-Sized Specimens
- ASTM E3-01 Standard Practice for Preparation of Metallographic Specimens
- ASTM D1586-08a Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils
- ASTM E2248-12 Standard Test Method for Impact Testing of Miniaturized Charpy V-Notch Specimens
- ASTM E2248-15 Standard Test Method for Impact Testing of Miniaturized Charpy V-Notch Specimens
- ASTM E2248-13 Standard Test Method for Impact Testing of Miniaturized Charpy V-Notch Specimens
- ASTM D7015-13 Standard Practices for Obtaining Intact Block lpar;Cubical and Cylindricalrpar; Samples of Soils
- ASTM D480-88(1999) Standard Test Methods for Sampling and Testing of Flaked Aluminum Powders and Pastes
- ASTM D3394-94(2005) Standard Test Methods for Sampling and Testing Electrical Insulating Board
- ASTM C1019-19 Standard Test Method for Sampling and Testing Grout for Masonry
- ASTM D2347-00(2021) Standard Test Method for Measuring Area of Leather Test Specimens
- ASTM C1019-08 Standard Test Method for Sampling and Testing Grout
- ASTM C1019-08a Standard Test Method for Sampling and Testing Grout
- ASTM C1704/C1704M-09 Standard Test Method for Sampling and Testing Structural Cementitious Panels
- ASTM D3394-94(2000) Standard Test Methods for Sampling and Testing Electrical Insulating Board
- ASTM D3394-94(2009) Standard Test Methods for Sampling and Testing Electrical Insulating Board
- ASTM D2347-00(2010) Standard Test Method for Measuring Area of Leather Test Specimens
- ASTM E795-23 Standard Practices for Mounting Test Specimens During Sound Absorption Tests
- ASTM D3394-16 Standard Test Methods for Sampling and Testing Electrical Insulating Board
- ASTM D5947-18 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
- ASTM C1019-20 Standard Test Method for Sampling and Testing Grout for Masonry
- ASTM E1077-01(2005) Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens
- ASTM D2347-00(2015) Standard Test Method for Measuring Area of Leather Test Specimens
- ASTM D3394-16(2022) Standard Test Methods for Sampling and Testing Electrical Insulating Board
- ASTM C1704/C1704M-09a(2016) Standard Test Method for Sampling and Testing Structural Cementitious Panels
- ASTM C341-96 Standard Test Method for Length Change of Drilled or Sawed Specimens of Hydraulic-Cement Mortar and Concrete
- ASTM D1586/D1586M-18 Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils
- ASTM C561-91(2010)e1 Standard Test Method for Ash in a Graphite Sample
- ASTM D4427-92(2007) Standard Classification of Peat Samples by Laboratory Testing
- ASTM C562-91(2010)e1 Standard Test Method for Moisture in a Graphite Sample
- ASTM D3879-91(2004) Standard Test Method for Sampling Amphibole Asbestos
- ASTM D143-94(2007) Standard Test Methods for Small Clear Specimens of Timber
- ASTM D509-05 Standard Test Methods of Sampling and Grading Rosin
- ASTM D3879-91(1999) Standard Test Method for Sampling Amphibole Asbestos
- ASTM D509-05(2011)e1 Standard Test Methods of Sampling and Grading Rosin
- ASTM D3879-91(2004)e1 Standard Test Method for Sampling Amphibole Asbestos
- ASTM B925-08 Standard Practices for Production and Preparation of Powder Metallurgy (PM) Test Specimens
- ASTM D509-70(1987) Standard Test Methods of Sampling and Grading Rosin
- ASTM D4427-92(1997) Standard Classification of Peat Samples by Laboratory Testing
- ASTM D2258-99(2012) Standard Practice for Sampling Yarn for Testing
- ASTM D7986-17 Standard Practice for Preparing Specimens of Hydraulic Erosion Control Products for Index Property Testing
- ASTM D2258/D2258M-16(2022) Standard Practice for Sampling Yarn for Testing
- ASTM C562-23 Standard Test Method for Moisture in a Graphite Sample
- ASTM D1441-12(2020) Standard Practice for Sampling Cotton Fibers for Testing
- ASTM C903-15(2020) Standard Practice for Preparing Refractory Specimens by Cold Gunning
- ASTM C561-23 Standard Test Method for Ash in a Graphite Sample
- ASTM D7986-17a Standard Practice for Preparing Specimens of Hydraulic Erosion Control Products for Index Property Testing
- ASTM D4427-13(2017) Standard Classification of Peat Samples by Laboratory Testing
- ASTM D4427-18 Standard Classification of Peat Samples by Laboratory Testing
- ASTM D509-20 Standard Test Methods of Sampling and Grading Rosin
- ASTM C561-16 Standard Test Method for Ash in a Graphite Sample
- ASTM D2258/D2258M-16 Standard Practice for Sampling Yarn for Testing
- ASTM D509-15 Standard Test Methods of Sampling and Grading Rosin
- ASTM D4263-83(2005) Standard Test Method for Indicating Moisture in Concrete by the Plastic Sheet Method
- ASTM D4263-83(2012) Standard Test Method for Indicating Moisture in Concrete by the Plastic Sheet Method
- ASTM E602-03 Standard Test Method for Sharp-Notch Tension Testing with Cylindrical Specimens
- ASTM E877-03 Standard Practice for Sampling and Sample Preparation of Iron Ores and Related Materials
- ASTM D5147-02ae1 Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
- ASTM A717/A717M-95 Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens
- ASTM E795-00 Standard Practices for Mounting Test Specimens During Sound Absorption Tests
- ASTM D5147-07 Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
- ASTM D5147-07a Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
- ASTM D5147-07b Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
- ASTM A717/A717M-01 Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens
- ASTM D5147-01a Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
- ASTM D5147-97 Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
- ASTM D5147-01 Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
- ASTM C1704/C1704M-09a Standard Test Method for Sampling and Testing Structural Cementitious Panels
- ASTM A717/A717M-06 Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens
- ASTM E795-05(2012) Standard Practices for Mounting Test Specimens During Sound Absorption Tests
- ASTM A717/A717M-12(2018) Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens
- ASTM D5147/D5147M-18 Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
- ASTM E795-05 Standard Practices for Mounting Test Specimens During Sound Absorption Tests
- ASTM C1704/C1704M-09a(2023) Standard Test Method for Sampling and Testing Structural Cementitious Panels
- ASTM A717/A717M-12(2022) Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens
- ASTM D2591-07(2020) Standard Test Method for Linear Density of Elastomeric Yarns (Short Length Specimens)
- ASTM E602-91(1997) Standard Test Method for Sharp-Notch Tension Testing with Cylindrical Specimens
- ASTM D1485-86(2002) Standard Test Methods for Rubber from Natural Sources-Sampling and Sample Preparation
- ASTM C702/C702M-11 Standard Practice for Reducing Samples of Aggregate to Testing Size
- ASTM G58-85(2011) Standard Practice for Preparation of Stress-Corrosion Test Specimens for Weldments
- ASTM D509-03 Standard Test Methods of Sampling and Grading Rosin
- ASTM E1253-07 Standard Guide for Reconstitution of Irradiated Charpy-Sized Specimens
- ASTM D1441-00 Standard Practice for Sampling Cotton Fibers for Testing
- ASTM D1441-06 Standard Practice for Sampling Cotton Fibers for Testing
- ASTM A34/A34M-01 Standard Practice for Sampling and Procurement Testing of Magnetic Materials
- ASTM G58-85(1999) Standard Practice for Preparation of Stress-Corrosion Test Specimens for Weldments
- ASTM D2944-71(2008) Standard Test Method of Sampling Processed Peat Materials
- ASTM D2813-03(2008) Standard Practice for Sampling Leather for Physical and Chemical Tests
- ASTM C322-09 Standard Practice for Sampling Ceramic Whiteware Clays
- ASTM D1071-83(2008) Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
- ASTM D1441-12 Standard Practice for Sampling Cotton Fibers for Testing
- ASTM A34/A34M-06(2018) Standard Practice for Sampling and Procurement Testing of Magnetic Materials
- ASTM A34/A34M-96 Standard Practice for Sampling and Procurement Testing of Magnetic Materials
- ASTM D197-87(2012) Standard Test Method for Sampling and Fineness Test of Pulverized Coal
- ASTM D6988-13 Standard Guide for Determination of Thickness of Plastic Film Test Specimens
- ASTM A34/A34M-06(2021) Standard Practice for Sampling and Procurement Testing of Magnetic Materials
- ASTM G58-85(2015) Standard Practice for Preparation of Stress-Corrosion Test Specimens for Weldments
- ASTM D6988-21 Standard Guide for Determination of Thickness of Plastic Film Test Specimens
- ASTM D4427-23 Standard Classification of Peat Samples by Laboratory Testing
- ASTM D2944-13 Standard Practice of Sampling Processed Peat Materials
- ASTM D3977-97(2013) Standard Test Methods for Determining Sediment Concentration in Water Samples
- ASTM C67-00 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
- ASTM C67/C67M-19 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
- ASTM D2936-95 Standard Test Method for Direct Tensile Strength of Intact Rock Core Specimens
- ASTM D2936-95(2001)e1 Standard Test Method for Direct Tensile Strength of Intact Rock Core Specimens
- ASTM D5635/D5635M-18 Standard Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens
- ASTM C67-05 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
- ASTM D3967-05 Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens
- ASTM D4533-91(1996) Standard Test Method for Trapezoid Tearing Strength of Geotextiles
- ASTM D5147-02 Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
- ASTM D5147-02a Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
- ASTM D5147-06 Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
- ASTM D5147-05 Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
- ASTM C67-06 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
- ASTM E2248-09 Standard Test Method for Impact Testing of Miniaturized Charpy V-Notch Specimens
- ASTM C1606-04(2009) Standard Test Method for Sampling Protocol for TCLP Testing of Container Glassware
- ASTM C1606-10 Standard Test Method for Sampling Protocol for TCLP Testing of Container Glassware
- ASTM D5635-04 Standard Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens
- ASTM C67/C67M-20 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
- ASTM C67-03a Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
- ASTM C67-03 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
- ASTM D5635-03 Standard Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens
- ASTM C67-02 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
- ASTM C67/C67M-18 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
- ASTM D5602/D5602M-18 Standard Test Method for Static Puncture Resistance of Roofing Membrane Specimens
- ASTM D5635/D5635M-18(2022) Standard Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens
- ASTM D5602/D5602M-18(2022) Standard Test Method for Static Puncture Resistance of Roofing Membrane Specimens
- ASTM D6717-07(2012) Standard Test Method for Linear Density of Elastomeric Yarns (Skein Specimens)
- ASTM C67/C67M-21 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
- ASTM B825-19 Standard Test Method for Coulometric Reduction of Surface Films on Metallic Test Samples
- ASTM C67/C67M-23a Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
- ASTM D2936-20 Standard Test Method for Direct Tensile Strength of Intact Rock Core Specimens
- ASTM B528-10 Standard Test Method for Transverse Rupture Strength of Metal Powder Specimens
- ASTM C39/C39M-14a Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-15a Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-17b Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM D2591-07(2013) Standard Test Method for Linear Density of Elastomeric Yarns (Short Length Specimens)
- ASTM D3967-08 Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens
- ASTM D7196-23 Standard Test Method for Raveling Test of Cold-Mixed Emulsified Asphalt Samples
- ASTM E2489-16 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs
- ASTM D7755-11 Standard Practice for Determining the Wear Volume on Standard Test Pieces Used by High-Frequency, Linear-Oscillation (SRV) Test Machine
- ASTM A673/A673M-05a Standard Specification for Sampling Procedure for Impact Testing of Structural Steel
- ASTM D6287-05 Standard Practice for Cutting Film and Sheeting Test Specimens
- ASTM D6988-07 Standard Guide for Determination of Thickness of Plastic Film Test Specimens
- ASTM D1045-95 Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics
- ASTM D1045-95(2001) Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics
- ASTM D6287-98 Standard Practice for Cutting Film and Sheeting Test Specimens
- ASTM D4220/D4220M-14 Standard Practices for Preserving and Transporting Soil Samples
- ASTM A673/A673M-95 Standard Specification for Sampling Procedure for Impact Testing of Structural Steel
- ASTM A673/A673M-01 Standard Specification for Sampling Procedure for Impact Testing of Structural Steel
- ASTM A673/A673M-05 Standard Specification for Sampling Procedure for Impact Testing of Structural Steel
- ASTM A673/A673M-02 Standard Specification for Sampling Procedure for Impact Testing of Structural Steel
- ASTM A673/A673M-04 Standard Specification for Sampling Procedure for Impact Testing of Structural Steel
- ASTM C617-98(2003) Standard Practice for Capping Cylindrical Concrete Specimens
- ASTM C617-98 Standard Practice for Capping Cylindrical Concrete Specimens
- ASTM E1077-01 Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens
- ASTM A673/A673M-07(2012) Standard Specification for Sampling Procedure for Impact Testing of Structural Steel
- ASTM D6287-09 Standard Practice for Cutting Film and Sheeting Test Specimens
- ASTM D4223/D4223M-20 Standard Practices for Preparation of Test Specimens of Asphalt-Stabilized Soils
- ASTM D6988-08 Standard Guide for Determination of Thickness of Plastic Film Test Specimens
- ASTM E2749-15a(2019) Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens
- ASTM C1856/C1856M-17 Standard Practice for Fabricating and Testing Specimens of Ultra-High Performance Concrete
- ASTM D6287-17 Standard Practice for Cutting Film and Sheeting Test Specimens
- ASTM D4223/D4223M-12 Standard Practice for Preparation of Test Specimens of Asphalt-Stabilized Soils
- ASTM C865-13 Standard Practice for Firing Refractory Concrete Specimens
- ASTM C562-15 Standard Test Method for Moisture in a Graphite Sample
- ASTM A673/A673M-17 Standard Specification for Sampling Procedure for Impact Testing of Structural Steel
- ASTM B528-05 Standard Test Method for Transverse Rupture Strength of Metal Powder Specimens
- ASTM D2094-00 Standard Practice for Preparation of Bar and Rod Specimens for Adhesion Tests
- ASTM D2094-00e1 Standard Practice for Preparation of Bar and Rod Specimens for Adhesion Tests
- ASTM D5635-04a Standard Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens
- ASTM D5602-98 Standard Test Method for Static Puncture Resistance of Roofing Membrane Specimens
- ASTM D5602-98(2006) Standard Test Method for Static Puncture Resistance of Roofing Membrane Specimens
- ASTM D2094-00(2006) Standard Practice for Preparation of Bar and Rod Specimens for Adhesion Tests
- ASTM D5635-98 Standard Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens
- ASTM C67-07a Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
- ASTM C67-07 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
- ASTM B312-96(2002) Standard Test Method for Green Strength for Compacted Metal Powder Specimens
Korean Agency for Technology and Standards (KATS), Mark the sample
- KS B 0831-2001 Standard test blocks for ultrasonic testing
- KS R ISO 12349-1:2004 Road vehicles-Dummies for restraint system testing-Part 1:Adult dummies
- KS R ISO 12349-2:2004 Road vehicles-Dummies for restraint system testing-Part 2:Child dummies
- KS B 5544-2003 Metallic materials－Charpy pendulum impact test－Part 3：Preparation andcharacterization of Charpy V reference test pieces for verification of test machines
- KS M ISO 1514:2011 Paints and varnishes-Standard pannels for testing
- KS M 1047-2009 Nitrogen monoxide and nitrogen dioxide(standard reference materials)
- KS R 1140-2001 Standard reference test specimens for calibratinga laboratory light exposure apparatus
- KS F 2440-2014 Standard test method of sampling and testing concrete masonry units
- KS K 0911-2007 Grey scale for assessing change in colour
- KS F 2317-2016(2021) Standard test method for thin-walled tube sampling of soils
- KS F 2348-2016(2021) Standard test method for ring-lined barrel sampling of soils
- KS K 0911-1985 Grey scale for assessing change in colour
- KS F 2487-2013 Standard test method for preparation of asphalt mixture specimens for performance testing
- KS P ISO 8596:2006 Ophthalmic optics－Visual acuity testing－Standard optotype and its presentation
- KS F 2348-2016 Standard test method for ring-lined barrel sampling of soils
- KS F 2317-2016 Standard test method for thin-walled tube sampling of soils
- KS R 1140-2001(2016) Standard reference test specimens for calibratinga laboratory light exposure apparatus
- KS F 2350-2020 Standard test method for sampling asphalt paving mixtures
- KS R 1140-2001(2021) Standard reference test specimens for calibratinga laboratory light exposure apparatus
- KS F 2350-1985 Standard test method for sampling asphalt paving mixtures
European Committee for Electrotechnical Standardization（CENELEC）, Mark the sample
- EN 61115:1993 Expression of Performance of Sample Handling Systems for Process Analyzers
International Organization for Standardization (ISO), Mark the sample
- ISO 3785:1976 Steel; Designation of test piece axes
- ISO 16773-4:2009 Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Part 4: Examples of spectra of polymer-coated specimens
- ISO 1514:2004 Paints and varnishes - Standard panels for testing
- ISO 1514:2016 Paints and varnishes - Standard panels for testing
- ISO 1514:1984 Paints and varnishes; Standard panels for testing
- ISO 2313:1972 Textiles; Determination of the recovery from creasing of a horizontally folded specimen of fabric by measuring the angle of recovery
- ISO 8596:2009 Ophthalmic optics - Visual acuity testing - Standard optotype and its presentation
Lithuanian Standards Office , Mark the sample
- LST EN 326-1-1999 Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results
- LST EN 13459-2011 Road marking materials - Sampling from storage and testing
未注明发布机构, Mark the sample
- BS EN 326-1:1994(1999) Wood - based panels — Sampling, cutting and inspection — Part 1 : Sampling and cutting of test pieces and expression of test results
ES-AENOR, Mark the sample
European Committee for Standardization (CEN), Mark the sample
- EN 13892-1:2002 Methods of test for screed materials - Part 1: Sampling, making and curing specimens for test
- EN 14407:2004 Water quality Guidance standard for the identification, enumeration and interpretation of benthic diatom samples from running waters
- EN 14407:2014 Water quality - Guidance for the identification and enumeration of benthic diatom samples from rivers and lakes
- prEN 21514-1990 Paints and varnishes; standard panels for testing (ISO 1514, edition 1984 modified)
AENOR, Mark the sample
- UNE-EN 326-1:1995 WOOD-BASED PANELS. SAMPLING, CUTTING AND INSPECTION. PART 1: SAMPLING AND CUTTING OF TEST PIECES AND EXPRESSION OF TEST RESULTS.
- UNE-EN 13459:2012 Road marking materials - Sampling from storage and testing
Group Standards of the People's Republic of China, Mark the sample
- T/CGDF 00033-2022 Assessment standard for demonstration bases of biodiversity conservation and green development
- T/CGDF 00032-2022 Evaluation index for demonstration bases of biodiversity conservation and green development
HU-MSZT, Mark the sample
Military Standards (MIL-STD), Mark the sample
British Standards Institution (BSI), Mark the sample
- BS EN 13892-1:2002 Methods of test for screed materials - Sampling, making and curing specimens for test
- BS EN ISO 3452-3:1999 Non-destructive testing - Penetrant testing - Reference test blocks
- BS EN ISO 1514:2004 Paints and varnishes - Standard panels for testing
- BS EN 13459:2011 Road marking materials. Sampling from storage and testing
- BS EN ISO 8596:2018+A1:2020 Ophthalmic optics. Visual acuity testing. Standard and clinical optotypes and their presentation
- BS EN ISO 294-5:2013 Plastics. Injection moulding of test specimens of thermoplastic materials. Preparation of standard specimens for investigating anisotropy
- BS IEC 61747-40-5:2018 Liquid crystal display devices. Mechanical testing of display cover glass for mobile devices. Strength against dynamic impact by a sharp object with the specimen rigidly supported
RU-GOST R, Mark the sample
- GOST 12423-1966 Plastics. Standard atmospheres for conditioning and testing specimens
- GOST 7.62-2008 System of standards on information, librarianship and publishing. Symbols for making-up manuscripts, galleys and proofs correction. General requirements
- GOST 9717.3-1982 Copper. Method of spectral analysis of oxide standart specimens
- GOST 12423-2013 Plastics. Standard atmospheres for conditioning and testing specimens
National Metrological Technical Specifications of the People's Republic of China, Mark the sample
- JJF(机械) 050-2009 Standard Specification for Standard Specimens of Abrasive Magnetic Substances
- JJF 1883-2020 Calibration Specification for Standard Sample in Impedance Tube Absorption
UY-UNIT, Mark the sample
Professional Standard - Commodity Inspection, Mark the sample
- SN/T 0541.1-1996 Inspecting method for import and export standard rubber.Sampling and test-sample preparation
- SN/T 0541.1-2010 Inspection for import and export standard rubber.Part 1:Sampling and test-sample preparation
AASHTO - American Association of State Highway and Transportation Officials, Mark the sample
- T 32-1994 Standard Method of Test for Sampling and Testing Brick
- T 32-2008 Standard Method of Test for Sampling and Testing Brick
- T 32-2010 Standard Method of Test for Sampling and Testing Brick
- T 32-2000 Standard Method of Test for Sampling and Testing Brick
- T 32-2005 Standard Method of Test for Sampling and Testing Brick
- T2-1991 Standard Method of Test for Sampling of Aggregates
- T 32-1996 Standard Specification for Sampling and Testing Brick
- T 32-1998 Standard Specification for Sampling and Testing Brick
- T 102-2009 Standard Method of Test for Spot Test of Asphaltic Materials
- T 218-1986 Standard Method of Test for Sampling Hydrated Lime
- T40-1978 Standard Method of Test for Sampling Bituminous Materials
- T 40-2002 Standard Method of Test for Sampling Bituminous Materials
- T 231-2005 Standard Method of Test for Capping Cylindrical Concrete Specimens
- T 231-2017 Standard Method of Test for Capping Cylindrical Concrete Specimens
- T60-1984 Standard Method of Test for Sampling and Testing Wood Preservatives
- T 127-2004 Standard Method of Test for Sampling and Amount of Testing of Hydraulic Cement
- T 127-2011 Standard Method of Test for Sampling and Amount of Testing of Hydraulic Cement
- T 127-2015 Standard Method of Test for Sampling and Amount of Testing of Hydraulic Cement
- T 141-2011 Standard Method of Test for Sampling Freshly Mixed Concrete
- T 141-2005 Standard Method of Test for Sampling Freshly Mixed Concrete
- T 207-2003 Standard Method of Test for Thin-Walled Tube Sampling of Soils
- T 207-2012 Standard Method of Test for Thin-Walled Tube Sampling of Soils
- T 243M/T 243-2008 Standard Method of Test for Sampling Procedure for Impact Testing of Structural Steel
- T 243M/T 243-2007 Standard Method of Test for Sampling Procedure for Impact Testing of Structural Steel
- T 243M/T 243-2019 Standard Method of Test for Sampling Procedure for Impact Testing of Structural Steel
- T 206-2003 Standard Method of Test for Penetration Test and Split-Barrel Sampling of Soils
- T 206-2009 Standard Method of Test for Penetration Test and Split-Barrel Sampling of Soils
- T 22-2007 Standard Method of Test for Compressive Strength of Cylindrical Concrete Specimens
- T 22-2014 Standard Method of Test for Compressive Strength of Cylindrical Concrete Specimens
- T 22-2010 Standard Method of Test for Compressive Strength of Cylindrical Concrete Specimens
- T 248-2014 Standard Method of Test for Reducing Samples of Aggregate to Testing Size
- T 248-2002 Standard Method of Test for Reducing Samples of Aggregate to Testing Size
- T 248-2011 Standard Method of Test for Reducing Samples of Aggregate to Testing Size
- T102-1983 Standard Method of Test for Spot Test of Asphaltic Materials (Twentieth Edition)
- T 168-1991 Standard Method of Test for Sampling Bituminous Paving Mixtures
- T 168-2003 Standard Method of Test for Sampling Bituminous Paving Mixtures
The American Road & Transportation Builders Association, Mark the sample
KR-KS, Mark the sample
ZA-SANS, Mark the sample
- SANS 6011:1980 Cutting and marking of test specimens of particle boards
- SANS 6011:2009 Cutting and marking of test specimens of particle boards
- SANS 5001:1971 Sterility testing: sampling, criteria of compliance of a batch with sterility requirements
- SANS 3452-3:1998 Non-destructive testing - Penetrant testing Part 3: Reference test blocks
Military Standard of the People's Republic of China-General Armament Department, Mark the sample
YU-JUS, Mark the sample
- JUS C.A4.061-1985 Mechanical testing ofmetals. DesignaH'on of testpiece axes
- JUS D.A8.030-1983 Standard atmosphere for conditioning of samples and test pieces of wood and vvood-based boards
VN-TCVN, Mark the sample
- TCVN 5670-2007 Paints and varnishes.Standard panels for testing
- TCVN 3105-1993 Heavywight fresh concrete and concrete.Sampling, marking and curing test specimens
TH-TISI, Mark the sample
- TIS 160-1975 Standard for methods of sampling and testing for leather
- TIS 109-1974 Standard for sampling and testing concrete masonry units
Professional Standard - Light Industry, Mark the sample
GOSTR, Mark the sample
- GOST 9717.3-2018 Copper. Method of spectral analysis by oxide standard specimens
PT-IPQ, Mark the sample
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Mark the sample
- GB/T 35970-2018 Specification for the sample database of label conformance testing
American National Standards Institute （ANSI), Mark the sample
TZ-TBS, Mark the sample
- TZS 54 Pt.1-1979 Tanznia Standard Oils and fats_Sampling and test methods Part 1 : Sampling, physical and chemical tests
- TZS 35-1979 Tanzania Standard Soaps — Sampling and test methods
BR-ABNT, Mark the sample
Institute of Electrical and Electronics Engineers (IEEE), Mark the sample
ES-UNE, Mark the sample
- UNE-EN ISO 8596:2018 Ophthalmic optics - Visual acuity testing -- Standard and clinical optotypes and their presentation (ISO 8596:2017)
PL-PKN, Mark the sample
- PN C04224-1993 Rubber. Standard temperatures, humidities and times for the conditioning and testing of test pieces
PH-BPS, Mark the sample
AT-ON, Mark the sample
- ONORM L 5268-1987 Sampling unit for milk collecting vehicles; marking of conformity, test sticker badge
VE-FONDONORMA, Mark the sample
SE-SIS, Mark the sample
CEN - European Committee for Standardization, Mark the sample
- EN 13459:2011 Road marking materials - Sampling from storage and testing
CZ-CSN, Mark the sample
AWS - American Welding Society, Mark the sample
- G1.2M/G1.2-1999 Specification for Standardized Ultrasonic Welding Test Specimen for Thermoplastics
Standard Association of Australia （SAA）, Mark the sample