ZH
RU
ES

Three-point bending test of metal materials

Three-point bending test of metal materials, Total:359 items.

In the international standard classification, Three-point bending test of metal materials involves: Testing of metals, Welding, brazing and soldering, Materials for aerospace construction, Inorganic chemicals, Refractories, Plastics, Linear and angular measurements, Surface treatment and coating, Road vehicle systems, Products of the textile industry, Test conditions and procedures in general, Construction materials, Paint coating processes, Aerospace electric equipment and systems, Springs, Insulating materials, Materials for the reinforcement of composites, Valves, Pipeline components and pipelines, Products of non-ferrous metals, Reinforced plastics, Powder metallurgy, Electrical wires and cables, Waxes, bituminous materials and other petroleum products, Raw materials for rubber and plastics, Ceramics, Products of the chemical industry.

VN-TCVN, Three-point bending test of metal materials

TCVN 198-2008 Metallic materials.Bend test
TCVN 1826-2006 Metallic materials.Wire.Reverse bend test
TCVN 5891-2008 Metallic materials.Tube (in full section).Bend test
TCVN 5401-2010 Destructive tests on welds in metallic materials.Bend tests

TH-TISI, Three-point bending test of metal materials

TIS 2173-2012 Metallic materials.bend test
TIS 2175-2004 Reverse bend test for metallic wire [iso title: metallic materials.wire.reverse bend test]
TIS 2176-2004 Torsion test for metallic wire [iso title: metallic materials.wire.simple torsion test]
TIS 2174-2004 Reverse bend test for metallic sheet and strip 3 mm thick or less [iso title: metallic materials.sheet and strip 3 mm thick or less.reverse bend test]

British Standards Institution (BSI), Three-point bending test of metal materials

BS EN ISO 7438:2016 Metallic materials. Bend test
BS EN ISO 7438:2005 Metallic materials - Bend test
BS EN 910:1996 Destructive tests on welds in metallic materials - Bend tests
BS EN ISO 7438:2020 Metallic materials. Bend test
BS EN ISO 8491:2004 Metallic materials - Tube (in full section) - Bend test
18/30369869 DC BS EN ISO 7438. Metallic materials. Bend test
BS EN 2746:1998 Glass fibre reinforced plastics - Flexural test - Three point bend method
BS EN ISO 5173:2010 Destructive tests on welds in metallic materials - Bend tests
BS EN ISO 5173:2010+A1:2011 Destructive tests on welds in metallic materials. Bend tests
BS ISO 22407:2021 Metallic materials. Fatigue testing. Axial plane bending method
BS EN ISO 5173:2023 Destructive tests on welds in metallic materials. Bend tests
BS EN ISO 7799:2000 Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test
BS EN 13523-7:2014 Coil coated metals. Test methods. Resistance to cracking on bending (T-bend test)
BS EN 13523-7:2001 Coil coated metals - Test methods - Resistance to cracking on bending (T-bend test)
BS ISO 1143:2021 Metallic materials. Rotating bar bending fatigue testing
BS ISO 1143:2010 Metallic materials. Rotating bar bending fatigue testing
18/30366891 DC BS ISO 1143. Metallic materials. Rotating bar bending fatigue testing
20/30404146 DC BS ISO 1143. Metallic materials. Rotating bar bending fatigue testing
20/30361190 DC BS ISO 22407. Metallic materials. Fatigue testing. Axial plane bending method
18/30356322 DC BS ISO 21914. Test methods for fibre-reinforced cementitious composites. Bending moment-curvature curve by four-point bending test
21/30426853 DC BS EN ISO 5173. Destructive tests on welds in metallic materials. Bend tests
20/30425653 DC BS EN 13523-7. Coil coated metals. Test methods. Part 7. Resistance to cracking on bending (T-bend test)
BS EN 1320:1997 Destructive tests on welds in metallic materials - Fracture tests
BS EN ISO 4136:2012 Destructive tests on welds in metallic materials. Transverse tensile test
BS PD CEN/TS 15963:2014 Bitumen and bituminous binders. Determination of the fracture toughness temperature by a three point bending test on a notched specimen
BS DD CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
BS EN 876:1995 Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints
BS EN 1321:1997 Destructive test on welds in metallic materials - Macroscopic and microscopic examination of welds
BS EN 60811-504:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Bending tests at low temperature for insulation and sheaths
BS EN ISO 17653:2012 Resistance welding. Destructive tests on welds in metallic materials. Torsion test of resistance spot welds
BS EN 658-5:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of interlaminar shear strength by short span bend test (three points)
BS EN 658-5:2002 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of interlaminar shear strength by short span bend test (three points)
BS EN ISO 9015-2:2011 Destructive tests on welds in metallic materials. Hardness testing. Microhardness testing of welded joints
BS 6043-3.5.1:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Determination of flexural strength - Three point method

CZ-CSN, Three-point bending test of metal materials

CSN ISO 7438:1994 Metallic materials.Bend test
CSN ISO 7801:1994 Metallic materials. Wire. Reverse bend test
CSN 64 0130-1953
CSN 64 0124-1953
CSN ISO 7799:1994 Metallic materials. Sheet and strip 3 mm or less. Reverse bend test

European Committee for Standardization (CEN), Three-point bending test of metal materials

EN ISO 7438:2000 Metallic Materials - Bend Test ISO 7438: 1985
EN ISO 7438:2020 Metallic materials - Bend test (ISO 7438:2020)
EN ISO 7438:2005 Metallic materials Bend test
EN 10232:1993 Metallic Materials - Tube (in Full Section) - Bend Test
EN 910:1996 Destructive Tests on Welds in Metallic Materials - Bend Tests
EN ISO 5173:2023 Destructive tests on welds in metallic materials - Bend tests (Incorporates Amendment A1: 2011)
EN ISO 5173:2010 Destructive tests on welds in metallic materials - Bend tests (Incorporates Amendment A1: 2011)
EN ISO 7438:2016 Metallic materials - Bend test
EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
prEN ISO 5173:2021 Destructive tests on welds in metallic materials - Bend tests (ISO/DIS 5173:2021)
EN ISO 8491:2004 Metallic materials - Tube (in full section) - Bend test
EN 13523-7:2001 Coil Coated Metals - Test Methods - Part 7: Resistance to Cracking on Bending (T-Bend Test)
EN 13523-7:2014 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
EN 13523-7:2021 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
EN ISO 7799:2000 Metallic Materials - Sheet and Strip 3 mm Thick or Less - Reverse Bend Test ISO 7799:1985
EN 12100:1997 Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports
prEN 910-1992 Welding; welded butt joints in metallic materials; bend tests
EN ISO 5178:2011 Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints
EN ISO 17653:2012 Resistance welding - Destructive tests on welds in metallic materials - Torsion test of resistance spot welds
EN ISO 17653:2003 Destructive tests on welds in metallic materials Torsion test of resistance spot welds ISO 17653:2003

International Organization for Standardization (ISO), Three-point bending test of metal materials

ISO 7438:2005 Metallic materials - Bend test
ISO 7438:2016 Metallic materials - Bend test
ISO 7438:1985 Metallic materials; Bend test
ISO 7438:2020 Metallic materials — Bend test
ISO 7801:1984 Metallic materials; Wire; Reverse bend test
ISO/CD 7801 Metallic materials — Wire — Reverse bend test
ISO/DIS 7801:2023 Metallic materials — Wire — Reverse bend test
ISO 8491:1998 Metallic materials - Tube (in full section) - Bend test
ISO 8491:1986 Metallic materials; Tube (in full section); Bend test
ISO 1143:2010 Metallic materials - Rotating bar bending fatigue testing
ISO 1143:2021 Metallic materials - Rotating bar bending fatigue testing
ISO 5173:2009 Destructive tests on welds in metallic materials - Bend tests
ISO 22407:2021 Metallic materials — Fatigue testing — Axial plane bending method
ISO 5173:2023 Destructive tests on welds in metallic materials — Bend tests
ISO 5173:2009/Amd 1:2011 Destructive tests on welds in metallic materials - Bend tests; Amendment 1
ISO 21914:2019 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test
ISO 7799:1985 Metallic materials; Sheet and strip 3 mm thick or less; Reverse bend test
ISO 13924:2000 Plastics pipes and fittings - Bending-tensile cycle test for PE/metal transition fittings, PE tapping tees and PE branch saddles
ISO 17653:2003 Destructive tests on welds in metallic materials — Torsion test of resistance spot welds
ISO 17653:2012 Resistance welding - Destructive tests on welds in metallic materials - Torsion test of resistance spot welds
ISO/R 954:1969 Simple bend test for light metal and light metal alloy sheet and strip of thickness between 0,2 mm (0.008 in) and 7 mm (0.25 in)
ISO 15653:2010 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds

Association Francaise de Normalisation, Three-point bending test of metal materials

NF A03-158:2005 Metallic materials - Bend test.
NF A03-158:2016 Metallic materials - Bend test
NF A03-158*NF EN ISO 7438:2020 Metallic materials - Bend test
NF A03-010:1986 Metallic materials. Wire. Reverse bend test.
NF A03-091*NF EN ISO 8491:2004 Metallic materials - Tube (in full section) - Bend test
NF A03-091:1994 Metallic materials. Tube (in full section). Bend test.
NF A89-203/A1*NF EN ISO 5173/A1:2012 Destructive tests on welds in metallic materials - Bend tests.
NF A89-203:1996 Destructive tests on welds in metallic materials. Bend tests.
NF A89-203*NF EN ISO 5173:2010 Destructive tests on welds in metallic materials - Bend tests.
NF T37-001-7:2014 Coil coated metals - Test methods - Part 7 : resistance to cracking on bending (T-bend test)
NF T37-001-7*NF EN 13523-7:2021 Coil coated metals - Test methods - Part 7 : resistance to cracking on bending (T-bend test)
NF EN ISO 5173:2023 Essais destructifs des soudures sur matériaux métalliques - Essais de pliage
NF A03-159*NF EN ISO 7799:2000 Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test.
NF EN ISO 14556:2023 Matériaux métalliques - Essai de flexion par choc sur éprouvette Charpy à entaille en V - Méthode d'essai instrumenté
NF EN ISO 9016:2022 Essais destructifs des soudures sur matériaux métalliques - Essai de flexion par choc - Position de l'éprouvette, orientation de l'entaille et examen
NF EN ISO 6802:2018 Tuyaux et flexibles en caoutchouc et en plastique renforcés par des fils métalliques - Essai d'impulsions hydrauliques avec flexions
NF EN ISO 17653:2012 Soudage par résistance - Essais destructifs des soudures sur matériaux métalliques - Essai de torsion de soudure par résistance par points
NF C32-011-504*NF EN 60811-504:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 504: mechanical tests - Bending tests at low temperature for insulation and sheaths
NF A89-217:2010 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds.
NF EN 60811-601:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 601 : essais physiques - Mesure du point de goutte des matières de remplissage

ZA-SANS, Three-point bending test of metal materials

SANS 7438:2003 Metallic materials - Bend test
SANS 7438:2009 Metallic materials - Bend test
SANS 8491:2003 Metallic materials - Tube (in full section) - Bend test
SANS 7801:2003 Metallic materials - Wire - Reverse bend test
SANS 547:2006 Destructive tests on welds in metallic materials - Bend tests
SANS 7799:2003 Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test

German Institute for Standardization, Three-point bending test of metal materials

DIN EN ISO 7438:2005 Metallic materials - Bend test (ISO 7438:2005); English version of DIN EN ISO 7438
DIN EN ISO 7438:2012 Metallic materials - Bend test (ISO 7438:2005); German version EN ISO 7438:2005
DIN EN ISO 7438:2021-03 Metallic materials - Bend test (ISO 7438:2020); German version EN ISO 7438:2020
DIN EN ISO 5173:2012 Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009 + Amd 1:2011); German version EN ISO 5173:2010 + A1:2011
DIN ISO 7801:2008 Metallic Materials - Wire - Reverse bend test (ISO 7801:1984); English version of DIN ISO 7801:2008-10
DIN 51211:1978 Testing of Metallic Materials; Reverse Bend Test of Wires
DIN 50113:2018 Testing of metallic materials - Rotating bar bending fatigue test
DIN 50142:2019-09 Testing of metallic materials - Flat bending fatigue test
DIN EN ISO 8491:2004 Metallic materials - Tube (in full section) - Bend test (ISO 8491:1998); German version EN ISO 8491:2004
DIN EN ISO 8491:2004-10 Metallic materials - Tube (in full section) - Bend test (ISO 8491:1998); German version EN ISO 8491:2004
DIN 50113:2018-12 Testing of metallic materials - Rotating bar bending fatigue test
DIN 51902:1997 Testing of carbon materials - Determination of flexural strength by three point method - Solid matters
DIN 50142:1982 Testing of metallic materials; Flat bending fatigue test
DIN 50113:1982 Testing of metals; Rotating bar bending fatigue test
DIN 51902:2020 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN 51902:2020-12 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN EN ISO 5173:2023-05 Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2023); German version EN ISO 5173:2023
DIN ISO 7801:2008-10 Metallic Materials - Wire - Reverse bend test (ISO 7801:1984)
DIN EN ISO 5173:2021 Destructive tests on welds in metallic materials - Bend tests (ISO/DIS 5173:2021); German and English version prEN ISO 5173:2021
DIN EN 13523-7:2001 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test); German version EN 13523-7:2001
DIN EN 13523-7:2022 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
DIN ISO 9649:1993 Metallic materials; wire; reverse torsion test; identical with ISO 9649:1990
DIN 50142:2019 Testing of metallic materials - Flat bending fatigue test
DIN EN ISO 7438:2016 Metallic materials - Bend test (ISO 7438:2016); German version EN ISO 7438:2016
DIN EN ISO 7438:2021 Metallic materials - Bend test (ISO 7438:2020); German version EN ISO 7438:2020
DIN EN 13523-7:2022-01 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test); German version EN 13523-7:2021
DIN EN 13523-7:2020 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test); German and English version prEN 13523-7:2020
DIN EN ISO 7799:2000 Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test (ISO 7799:1985); German version EN ISO 7799:2000
DIN EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998
DIN 51944:1999 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN 51944:2020 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN 51944:2020-12 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN 51215:1975 Testing of Metallic Materials; Wrapping Test for Wires; General Information
DIN ISO 9649:2018 Metallic materials - Wire - Reverse torsion test (ISO 9649:2016)
DIN EN 13523-7:2014 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test); German version EN 13523-7:2014
DIN EN 12100:1997 Plastics piping systems - Polyethylene (PE) valves - Test method for the resistance to bending between supports; German version EN 12100:1997
DIN 51944 Berichtigung 1:2006 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials, Corrigendum to DIN 51944:1999-01
DIN EN ISO 7799:2000-07 Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test (ISO 7799:1985); German version EN ISO 7799:2000
DIN 51944 Corrigendum 1:2006 Testing of carbonaceous materials - Determination of flexural strength by four point method - Soild materials Corrigendum 1 to English version of DIN 51944:1999-01
DIN EN ISO 17653:2012-08 Resistance welding - Destructive tests on welds in metallic materials - Torsion test of resistance spot welds (ISO 17653:2012); German version EN ISO 17653:2012
DIN EN 658-5:2003-03 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three-points); German version EN 658-5:2002

KR-KS, Three-point bending test of metal materials

KS B 0804-2001(2021)(英文版) Metallic materials－Bend test
KS B ISO 5173-2021 Destructive tests on welds in metallic materials — Bend tests
KS B ISO 1143-2003(2023)
KS B ISO 5173-2016 Destructive tests on welds in metallic materials－Bend tests

Danish Standards Foundation, Three-point bending test of metal materials

DS/EN ISO 7438:2005 Metallic materials - Bend test
DS/ISO 7438:2020 Metallic materials – Bend test
DS/EN ISO 8491:2004 Metallic materials - Tube (in full section) - Bend test
DS/EN 10232:1994 Metallic materials-Tube(in full section)-Bend test
DS/EN ISO 5173:2010 Destructive tests on welds in metallic materials - Bend tests
DS/EN ISO 7438:2020 Metallic materials – Bend test (ISO 7438:2020)
DS/EN 2746:1999 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
DS/EN ISO 5173/A1:2012 Destructive tests on welds in metallic materials - Bend tests - Amendment 1
DS/EN 13523-7:2001 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
DS/EN ISO 7799:2001 Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test
DS/EN 60811-504:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 504: Mechanical tests - Bending tests at low temperature for insulation and sheaths
DS/EN 658-5:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points)
DS/EN ISO 17653:2012 Resistance welding - Destructive tests on welds in metallic materials - Torsion test of resistance spot welds
DS/ENV 658-5:1993 Advanced technical ceramic. Mechanical properties of ceramic composites at room temperature. Part 5: Determination of shear strength by short span bend test (three-point)

IT-UNI, Three-point bending test of metal materials

UNI EN ISO 7438:2020 Metallic materials - Bend test
UNI 564-1960
UNI 6381-1968
UNI 5469-1965
UNI 7673-1977
UNI 7671-1977
UNI 7672-1977

Japanese Industrial Standards Committee (JISC), Three-point bending test of metal materials

JIS Z 2248:2022 Metallic materials -- Bend test
JIS Z 2248:2006 Metallic materials -- Bend test
JIS Z 2248:1996 Method of bend test for metallic materials
JIS Z 2204:1996 Bend test pieces for metallic materials
JIS Z 2248 AMD 1 R:2022 Metallic materials -- Bend test (Amendment 1)
JIS Z 2248 AMD 1:2014 Metallic materials.Bend test (Amendment 1)
JIS Z 2274:1978 Method of rotating bending fatigue testing of metals
JIS Z 2286:2003 Method for high temperature rotating bending fatigue testing of metallic materials
JIS Z 2203:1956 Flexure test piece for metals
JIS K 7084:1993 Testing method for impact properties of carbon fibre reinforced plastics by instrumented 3-point bending impact test

Korean Agency for Technology and Standards (KATS), Three-point bending test of metal materials

KS B 0804-2001(2016) Metallic materials－Bend test
KS B 0804-2001(2021) Metallic materials－Bend test
KS B 0804-2001(2006) Metallic materials－Bend test
KS B 0803-1977(1995) BEND TEST SPECIMEN FOR METALS
KS B 0803-1985 BEND TEST SPECIMEN FOR METALS
KS B ISO 7801:2002 Metallic materials-Wire-Reverse bend test
KS B ISO 7801-2002(2012) Metallic materials－Wire－Reverse bend test
KS B ISO 7801:2015 Metallic materials－Wire－Reverse bend test
KS B ISO 8491-2001(2011) Metallic materials Tube(in full section) Bend test
KS B ISO 8491:2001 Metallic materials Tube(in full section) Bend test
KS B ISO 8491:2015 Metallic materials Tube(in full section) Bend test
KS B ISO 1143-2003(2018)
KS B 0832-2001 Destructive tests on welds in metallic materials-Bend tests
KS B 0832-1985 Destructive tests on welds in metallic materials-Bend tests
KS B ISO 1143:2003 Metals－Rotating bar bending fatigue testing
KS B ISO 5173:2021 Destructive tests on welds in metallic materials — Bend tests
KS B ISO 5173:2016 Destructive tests on welds in metallic materials－Bend tests
KS B 0804-2001 Metallic materials－Bend test
KS B ISO 7799-2004(2009) Metallic materials－Sheet and strip 3 mm thick or less－Reverse bend test
KS B ISO 7799:2004 Metallic materials-Sheet and strip 3 mm thick or less-Reverse bend test
KS B ISO 7799:2013 Metallic materials－Sheet and strip 3 mm thick or less－Reverse bend test
KS C IEC 60811-504-2014(2019) Electric and optical fibre cables — Test methods for non-metallic materials — Part 504: Mechanical tests — Bending tests at low temperature for insulation and sheaths
KS B ISO 17653-2003(2013) Destructive tests on welds in metallic materials－Torsion test of resistance spot welds
KS B ISO 17653:2003 Destructive tests on welds in metallic materials-Torsion test of resistance spot welds
KS B ISO 17653:2014 Destructive tests on welds in metallic materials－Torsion test of resistance spot welds

RU-GOST R, Three-point bending test of metal materials

GOST R ISO 7438-2013 Mettallic materials. Bend test
GOST R 52764-2007 Metallic materials. Method of bend test for sheets and strips 3 mm thick and less
GOST 30003-1993 Metals. Cylindrial bending test of sheets and strips less than 2,5 mm thick
GOST 30456-1997 Metal production. Rolled steel and tubes. Methods of blow bending tests
GOST IEC 60811-504-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 504. Mechanical tests. Bending tests at low temperature for insulation and sheaths
GOST 26528-1998 Sintered metal materials, excluding hardmetals. Impact test method
GOST 26528-1985 Powder materials. Impact test method

Taiwan Provincial Standard of the People's Republic of China, Three-point bending test of metal materials

CNS 3940-1999 Bend test pieces for metallic materials
CNS 3941-1999 Method of bend test for Metallic materials
CNS 7375-1997 Method of rotating bending fatigue testing of metals

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Three-point bending test of metal materials

GB/T 232-1999 Metallic materials--Bend test
GB/T 232-2010 Metallic materials.Bend test
GB/T 238-2002 Metallic materials-Wire-Reverse bend test
GB/T 238-2013 Metallic materials.Wire.Reverse bend test
GB/T 32976-2016 Test method for transverse bending of tubes of metallic materials
GB/T 4337-2008 Metallic materials.Fatigue testing.Rotating bar bending method
GB/T 4337-2015 Metallic materials.Fatigue testing.Rotating bar bending method
GB/T 235-2013 Metallic materials.Sheet and strip.Reverse bend test
GB/T 13665-2007 Test method for damping capacity of metallic damping materials Torsion pendulum method and bending vibration method
GB/T 13665-1992 Test method for damping capacity of metallic damping materials--Torsion pendulum method and flexural resonance method
GB/T 235-1999 Metallic materials--Sheet and strip 3mm thick or less--Reverse bend test
GB/T 38719-2020(英文版) Metallic materials Tube Determination of biaxial stress strain curve of tube by hydro bulging test
GB/T 37782-2019(英文版) "Metallic materials—Indentation test—Determination of strength,hardness and stressstrain curve"

SE-SIS, Three-point bending test of metal materials

SIS SS 11 26 22-1983 Metallic materials - Wire - Reverse bend test
SIS SS 11 26 23-1983 Metallic materials - Strip. Sheet - Reverse bend test
SIS SS 11 26 26-1979 Me tallic materials — Simple bend testing
SIS SS 11 23 72-1979 Metallic materials — Rotating bar bending fatigue testing — Design of test pieces
SIS 11 26 42-1967 Flanging test on tubes
SIS SS 11 23 90-1979 Metallic materials — Rotating bend fatigue test piece — Type Alfa

RO-ASRO, Three-point bending test of metal materials

STAS IS0 8491-1992 Metallic materials. Tube (in full section). Bend test
STAS SR ISO 7801:1993 Metallic materials. Wire. Reverse bend test
STAS 10417-1975 Tests of metals SIMPLE BEND TEST FOR LIGHT METAL AND LIGHT METAL ALLOY SHEETS AND STRIPS

AT-ON, Three-point bending test of metal materials

ONORM EN 10232-1994 Metallic materials. Tube (in full section). Bend test
OENORM EN ISO 7438:2021 Metallic materials - Bend test (ISO 7438:2020)
OENORM EN ISO 5173:2021 Destructive tests on welds in metallic materials - Bend tests (ISO/DIS 5173:2021)
ONORM EN 10235-1994 Metallic materials. Tube. Flanging test
OENORM EN 13523-7-2021 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)

Lithuanian Standards Office , Three-point bending test of metal materials

LST EN ISO 7438:2005 Metallic materials - Bend test (ISO 7438:2005)
LST EN ISO 7438:2020 Metallic materials - Bend test (ISO 7438:2020)
LST EN ISO 8491:2004 Metallic materials - Tube (in full section) - Bend test (ISO 8491:1998)
LST EN ISO 5173:2010 Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009)
LST EN 2746-2001 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
LST EN 13523-7-2002 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
LST EN ISO 5173:2010/A1:2012 Destructive tests on welds in metallic materials - Bend tests - Amendment 1 (ISO 5173:2009/Amd.1:2011)
LST EN ISO 7799:2001 Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test (ISO 7799:1985)
LST EN 60811-504-2012 Electric and optical fibre cables - Test methods for non-metallic materials -- Part 504: Mechanical tests - Bending tests at low temperature for insulation and sheaths (IEC 60811-504:2012)
LST EN 658-5-2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points)

PL-PKN, Three-point bending test of metal materials

PN-EN ISO 7438-2021-04 E Metallic materials -- Bend test (ISO 7438:2020)

国家市场监督管理总局、中国国家标准化管理委员会, Three-point bending test of metal materials

GB/T 244-2020 Metallic material—Tube—Bend test method
GB/T 38978-2020 Refractory products—Determination of stress-strain (three-point bending method）
GB/T 38806-2020 Metallic materials—Sheet and strip—Test method for bending and folding properties
GB/T 37782-2019 Metallic materials—Indentation test—Determination of strength, hardness and stress-strain curve
GB/T 38719-2020 Metallic materials—Tube—Determination of biaxial stress-strain curve of tube by hydro-bulging test

TR-TSE, Three-point bending test of metal materials

TS 205-1977 BEND TESTING OF METALLIC MATERIALS

ES-UNE, Three-point bending test of metal materials

UNE-EN ISO 7438:2021 Metallic materials - Bend test (ISO 7438:2020)
UNE 7469:2003 ERRATUM METALLIC MATERIALS. WIRE. REVERSE BEND TEST.
UNE-EN ISO 5173:2011 ERRATUM:2011 Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009)
UNE-EN ISO 5173:2023 Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2023)
UNE-EN 658-5:2002 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points) (Endorsed by AENOR in February of 2003.)

BE-NBN, Three-point bending test of metal materials

NBN-EN 10232-1994 Metallic materials. Tube (in full section). Bend test
NBN-EN 10235-1994 Metallic materials. Tube. Flanging test

Indonesia Standards, Three-point bending test of metal materials

SNI 07-4611-1998 Reverse bend test for metallic material wires
SNI 07-4612-1998 Bend tests for metallic material tubes in full section
SNI 07-4610-1998 Reverse bend test for metallic material sheets and strip, 3 mm thick less

Professional Standard - Agriculture, Three-point bending test of metal materials

GB/T 238-1984 Test method for repeated bending of metallic materials

AENOR, Three-point bending test of metal materials

UNE 7469:1999 METALLIC MATERIALS. WIRE. REVERSE BEND TEST.
UNE-EN ISO 8491:2006 Metallic materials - Tube (in full section) - Bend test (ISO 8491:1998)
UNE-EN ISO 5173:2011 Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009)
UNE-EN 13523-7:2014 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
UNE-EN ISO 7799:2000 METALLIC MATERIALS. SHEET AND STRIP 3 MM THICK OR LESS. REVERSE BEND TEST (ISO 7799:1985)
UNE-EN 60811-504:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 504: Mechanical tests - Bending tests at low temperature for insulation and sheaths

Standard Association of Australia （SAA）, Three-point bending test of metal materials

AS 2505.3:2004 Metallic materials - Tubular products - Bend and related tests
AS/NZS 2205.3.1:2020 Destructive tests on welds in metallic materials, Method 3.1: Bend tests
AS 2505.1:2004 Metallic materials - Sheet, strip and plate - Bend tests
AS 2505.2:2004 Metallic materials - Bars, rods and solid shapes - Bend tests

Professional Standard - Ferrous Metallurgy, Three-point bending test of metal materials

YB/T 5349-2014 Metallic materials.Determination of bending mechanical porperties

American Society for Testing and Materials (ASTM), Three-point bending test of metal materials

ASTM D5023-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-23 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D8058-23 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM E290-97a Standard Test Method for Bend Testing of Material for Ductility
ASTM E290-09 Standard Test Methods for Bend Testing of Material for Ductility
ASTM D5023-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D6272-02(2008)e1 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D6272-17 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D6272-17e1 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D8058-17 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D8058-17e1 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM B593-96 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
ASTM B593-96(2003) Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
ASTM B593-96(2003)e1 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
ASTM B593-96(2009)e1 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
ASTM B593-20 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
ASTM B593-21 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
ASTM B593-96(2014)e1 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
ASTM E855-90(2000) Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading
ASTM E855-90(1995) Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading
ASTM E855-21 Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading
ASTM E855-08 Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading
ASTM E855-08(2013) Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading
ASTM D5023-99 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D8458-22 Standard Test Method for Evaluation of Fatigue Performance of Asphalt Mixtures Using the Three-Point Bending Cylinder (3PBC) Test
ASTM B820-98 Standard Test Method for Bend Test for Formability of Copper Alloy Spring Material
ASTM D5934-96 Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending
ASTM D6272-10 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D6272-02 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D6272-00 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending

Society of Automotive Engineers (SAE), Three-point bending test of metal materials

SAE J949-2022 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three-Point Bending Test
SAE J949-2009 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three Point Bending Test

Professional Standard - Aviation, Three-point bending test of metal materials

HB 5175-1996 Metal wire repeated bending test method
HB 5175-1981 Metal wire repeated bending test method
HB 5178-1996 Metal sheet (strip) material repeated bending test method
HB 5178-1981 Metal sheet (strip) material repeated bending test method
HB 7617-1998 Test method for flexural properties of fiber reinforced metal matrix composite laminates

BR-ABNT, Three-point bending test of metal materials

ABNT MB-5-1939

FI-SFS, Three-point bending test of metal materials

SFS 3362-1975 Testing of materials. Reverse bend testing of metal sfteet and strip less than 3 mm thick
SFS 3361-1975 Testing of materia/s. Simple bend testing of metal sheet and strip less than 3 mm thick

AR-IRAM, Three-point bending test of metal materials

IRAM PROYECTO DE NORMA 106-P.-1944

Liaoning Provincial Standard of the People's Republic of China, Three-point bending test of metal materials

DB21/T 2104-2013 Calibration procedure for metal wire repeated bending test machine

European Association of Aerospace Industries, Three-point bending test of metal materials

AECMA PREN 2002-14-1986 Aerospace Series Test Methods for Metallic Materials Part 14 - Reverse Bend Testing of Wire Issue P 1
AECMA PREN 2002-6-1987 Aerospace Series Test Methods for Metallic Materials Part 6 - Bend Testing Issue P 1
AECMA PREN 2002-6-1999 Aerospace Series Metallic Materials Test Methods Part 6: Bend Testing Edition P2
AECMA PREN 2002-6-2000 Aerospace Series Metallic Materials Test Methods Part 6: Bend Testing Edition P 2

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Three-point bending test of metal materials

PREN 2002-6-1999 Aerospace Series Metallic Materials Test Methods Part 6: Bend Testing (Edition P2)
PREN 2002-6-1987 Aerospace Series Test Methods for Metallic Materials Part 6 - Bend Testing (Issue P 1)
PREN 2002-6-2000 Aerospace Series Metallic Materials Test Methods Part 6: Bend Testing (Edition P 2)
PREN 2002-14-1986 Aerospace Series Test Methods for Metallic Materials Part 14 - Reverse Bend Testing of Wire (Issue P 1)

American National Standards Institute （ANSI), Three-point bending test of metal materials

ANSI/ASTM E855:1990 Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading

CH-SNV, Three-point bending test of metal materials

VSM 10850-1973

ES-AENOR, Three-point bending test of metal materials

IN-BIS, Three-point bending test of metal materials

IS 1403 Pt.1-1993

Aerospace, Security and Defence Industries Association of Europe (ASD), Three-point bending test of metal materials

ASD-STAN PREN 2002-6-2000 Aerospace Series Metallic Materials Test Methods Part 6: Bend Testing (Edition P 2)
ASD-STAN PREN 2002-14-1986 Aerospace Series Test Methods for Metallic Materials Part 14 - Reverse Bend Testing of Wire (Issue P 1)

Professional Standard - Aerospace, Three-point bending test of metal materials

QJ 2099-1991 Test method for flexural properties of three-dimensional fiber reinforced composite materials

Malaysia Standards, Three-point bending test of metal materials

MS 1473-1999 Method of test for measuring the dynamic mechanical properties of plastics using three point bending

Professional Standard - Textile, Three-point bending test of metal materials

FZ/T 60042-2014 3D braided polymer matrix composites.Test method for bending properties
FZ/T 60042-2013 Test method for flexural properties of resin-based three-dimensional braided composites

Group Standards of the People's Republic of China, Three-point bending test of metal materials

T/CFA 010604.6-2018 Test method on three body abrasion of metallic materials

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Three-point bending test of metal materials

GB/T 33621-2017 Test method for bending properties of 3D braided fabric and its polymer matrix composites

European Committee for Electrotechnical Standardization（CENELEC）, Three-point bending test of metal materials

EN 60811-504:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 504: Mechanical tests - Bending tests at low temperature for insulation and sheaths

未注明发布机构, Three-point bending test of metal materials

DIN EN ISO 9016:2022 Destructive testing of welded joints on metallic materials – notched impact bending test – sample position, notch direction and assessment (ISO 9016:2022)

CEN - European Committee for Standardization, Three-point bending test of metal materials

EN ISO 5178:2019 Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints

International Electrotechnical Commission (IEC), Three-point bending test of metal materials

IEC 60811-504:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 504: Mechanical tests - Bending tests at low temperature for insulation and sheaths