ZH
RU
ES

Wafer terminal

Wafer terminal, Total:207 items.

In the international standard classification, Wafer terminal involves: Road vehicle systems, Radiation measurements, Ferrous metals, Fasteners for aerospace construction, Cutting tools, Welding, brazing and soldering, Capacitors, Aerospace electric equipment and systems, Machine tool systems, Electronic components in general, Pipeline components and pipelines, Bearings, Semiconductor devices, Powder metallurgy, Fasteners.

SE-SIS, Wafer terminal

SIS SS CECC 42101-802-1982 Detail specification: Low voftage varistors primarily for telephony applications - Disc type, with unidirectional wire terminations: protected- 1.0 W: Assessment level P
SIS SS CECC 42101-801-1982 Detail specification: Low vottage varistors primarily for telephony applications - Disc type, with unidirectional wire terminations: protected-0,4 W: Assessment leve/ P
SIS SS-ISO 7006:1982 Woodworking machines - Diameters of spindles for receiving circular saw- blades

Professional Standard - Aerospace, Wafer terminal

QJ 578-1981 Round hook end sleeve solder lug
QJ 575-1981 Round ring end sleeve solder lug

Professional Standard - Aviation, Wafer terminal

HB 8117-2002 Flaky connetor

German Institute for Standardization, Wafer terminal

DIN 41225:1972 Soldering-tag terminal strip
DIN 46262-4:1988-09 Low-voltage stud-terminals; snap rings, shackles, washers, shims
DIN EN 60294:2013-05 Measurement of the dimensions of a cylindrical component with axial terminations (IEC 60294:2012); German version EN 60294:2012 / Note: DIN IEC 60294 (1986-01) remains valid alongside this standard until 2015-08-17.
DIN/TS 46262-4:2023 Low-voltage stud-terminals - Part 4: Snap rings, shackles, washers, shims / Note: Date of issue 2023-02-24*Intended as replacement for DIN 46262-4 (1988-09).
DIN 4000-41:1983-12 Tabular layouts of article characteristics for solder lugs, solder pins, soldering terminals
DIN EN 3373-007:2012-06 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 007: Nickel plated aluminium terminal lugs for crimping on nickel plated aluminium cable for inch series studs - Product standard; German and English versio...

Society of Automotive Engineers (SAE), Wafer terminal

SAE J858-2001 Electrical Terminals Blade Type
SAE J858-2011 Electrical Terminals Blade Type
SAE AGS1761-3-1951 AGS1761 Lug Terminal No. 25
SAE AGS1704-3-1951 AGS1704 Lug, Terminal. No. 2
SAE AGS1738-4-1951 AGS1738 Lug, Terminal No.s 12 and 13
SAE AGS1737-3-1951 AGS1737 Lug, Terminal No.s 10 and 11
SAE AGS1741-3-1951 AGS1741 Lug, Terminal No.s 16 and 31
SAE AGS1749-3-1951 AGS1749 Lugs, Terminal No.s 28 and 29 A
SAE AGS1747-5-1951 AGS1747 Lug, Terminal No.s 19, 23, 24 and 27
SAE AS25189A-2017 TERMINAL, LUG, FLAG TYPE, CRIMP STYLE, COPPER, CLASS I
SAE AS7928/4_A1-2004 Terminals, Lug and Splices, Conductor, Crimp Style, Copper Terminal, Lug, Insulated, Ring Tongue, Bell-Mouthered, Type II, Class 1 (for 105°C Total Conductor Temperature)
SAE AS22520/5B-2023 CRIMPING TOOLS, TYPE 2, TERMINAL, HAND, WIRE TERMINATION, FOR COXIAL, TWIN AXIAL, TRIAXIAL, SHIELDED CONTACTS AND FERRULES, TERMINAL LUGS, SPLICES, AND END CAPS
SAE AS22520/10A-2023 CRIMPING TOOLS, TYPE 2, TERMINAL, HAND, WIRE TERMINATION, FOR COAXIAL, TWINAXIAL, TRIAXIAL, SHIELDED CONTACTS AND FERRULES, TERMINAL LUGS, SPLICES AND END CAPS
SAE AS22520/10-2021 CRIMPING TOOLS, TYPE 2, TERMINAL, HAND, WIRE TERMINATION, FOR COAXIAL, TWINAXIAL, TRIAXIAL, SHIELDED CONTACTS AND FERRULES, TERMINAL LUGS, SPLICES, AND END CAPS
SAE AS7928/4C-2020 TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER TERMINAL, LUG, INSULATED, RING TONGUE, BELL-MOUTHED, TYPE II, CLASS 1 (FOR 150 °C TOTAL CONDUCTOR TEMPERATURE)
SAE AS7928-1999 Terminals, Lug: Splices, Conductor: Crimp Style, Copper, General Specification For
SAE AS7928A_A1-2008 Terminals, Lug: Splices, Conductor: Crimp Style, Copper, General Specification For
SAE AS7928_A1-2004 Terminals, Lug: Splices, Conductor: Crimp Style, Copper, General Specification For
SAE AS7928C-2019 Terminals, Lug: Splices, Conductor: Crimp Style, Copper, General Specification for
SAE AS7928/1A_A1-2004 Terminals, Lug and Splices, Conductor, Crimp Style, Copper Terminal, Lug, Crimp Style, Copper, Insulated, Ring Tongue, for Thin Wall Wire, Type II Class 1 for 150°C Total Conductor Temperature
SAE AS22520/38-2016 CRIMPING TOOL, TERMINAL, HAND ACTUATED, WIRE TERMINATION, TYPE II, FOR EXTERNAL POWER PLUG SOCKET CONTACTS AND LUG TERMINAL SIZES 22-10
SAE AS22520/38A-2023 CRIMPING TOOL, TERMINAL, HAND ACTUATED, WIRE TERMINATION, TYPE II, FOR EXTERNAL POWER PLUG SOCKET CONTACTS AND LUG TERMINAL SIZES 22-10
SAE AS7928/13C-2020 TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER TERMINAL, LUG, INSULATED, TIN WHISKER RESISTANT, RING TONGUE, BELL-MOUTHED, TYPE II, CLASS 1 (FOR 150 °C TOTAL CONDUCTOR TEMPERATURE)
SAE AS7928/13D-2023 TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER TERMINAL, LUG, INSULATED, TIN WHISKER RESISTANT, RING TONGUE, BELL-MOUTHED, TYPE II, CLASS 1 (FOR 150 °C TOTAL CONDUCTOR TEMPERATURE)
SAE AGS1748-3-1951 AGS1748 Lug, Terminal, No. 22 (DC Output on 'UKX' Generator)
SAE AS7928/4A-2009 Terminals, Lug and Splices, Conductor, Crimp Style, Copper Terminal, Lug, Insulated, Ring Tongue, Bell-Mouthered, Type II, Class 1 (for 150°C Total Conductor Temperature)
SAE AS7928/8-2013 TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, FOR THIN WALL WIRE, TIN WHISKER RESISTANT, TYPE II CLASS 1 FOR 105 °C TOTAL CONDUCTOR TEMPERATURE
SAE AS7928/7A-2018 TERMINAL LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER, TERMINAL LUG, CRIMP STYLE, COPPER, UNINSULATED, RING TONGUE TYPE I, CLASS 1 FOR 175 °C TOTAL CONDUCTOR TEMPERATURE
SAE AS7928/8B-2021 TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, FOR THIN WALL WIRE, TIN WHISKER RESISTANT, TYPE II CLASS 1 FOR 105 °C TOTAL CONDUCTOR TEMPERATURE
SAE AIR1263-2009 TIN PLATED SOLDERLESS TERMINAL LUGS AND SPLICES ON NICKEL COATED HIGH TEMPERATURE WIRE
SAE AS25435A-2017 TERMINAL-LUG, CRIMP STYLE, STRAIGHT TYPE, FOR ALUMINUM AIRCRAFT WIRE, CLASS 1
SAE AS25435B-2019 TERMINAL-LUG, CRIMP STYLE, STRAIGHT TYPE, FOR ALUMINUM AIRCRAFT WIRE, CLASS 1
SAE AS7928/4-1999 Terminals, Lug and Splices, Conductor, Crimp Style, Copper Terminal, Lug, Insulated, Ring Tongue, Bell-Mouthered, Type II, Class 1 (for 105°C Total Conductor Temperature)
SAE ARP506-1959 TERMINALS, LUG AND SPLICE, CRIMP STYLE, INSULATED, COPPER FOR 500°F MAXIMUM
SAE AS70991A_A1-2007 Terminals: Lug and Splice, Crimp Style, Aluminum, For Aluminum Aircraft Wire
SAE ARP6807A-2021 Guide for Identification of Terminal Lugs in Electrical Wiring Interconnect Systems (EWIS)
SAE AIR1263A-2020 Tin Plated Solderless Terminal Lugs and Splices on Nickel Coated High Temperature Wire
SAE AS7928/1E-2021 TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, FOR THIN WALL WIRE, TYPE II CLASS 1 FOR 105 °C TOTAL CONDUCTOR TEMPERATURE
SAE AS25438-2009 TERMINAL-LUG, CRIMP STYLE, RIGHT ANGLE TYPE, FOR ALUMINUM AIRCRAFT WIRE, CLASS 1
SAE AS7928/13-2009 Terminals, Lug and Splices, Conductor, Crimp Style, Copper Terminal, Lug, Insulated, Tin Whisker Resistant, Ring, Tongue, Bell-Mouthed, Type II, Class 1 (for 150°C Total Conductor Temperature)
SAE AS7928/8C-2023 TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE COPPER TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, FOR THIN WALL WIRE, TIN WHISKER RESISTANT, TYPE II CLASS 1 FOR 105 °C TOTAL CONDUCTOR TEMPERATURE
SAE AS20659B_A1-2008 Terminal, Lug, Crimp Style, Copper, Uninsulated, Ring Tongue, Type I, Class I, for 175°C Total Conductor Temperature
SAE AS20659A_A1-2004 Terminal, Lug, Crimp Style, Copper, Uninsulated, Ring Tongue, type I, Class I, for 175°C Total Conductor Temperature
SAE AS17143-2012 TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RECTANGULAR TONGUE, TYPE II, CLASS 1 FOR 105 °C TOTAL CONDUCTOR TEMPERATURE
SAE AS17143B-2020 TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RECTANGULAR TONGUE, TYPE II, CLASS 1 FOR 105 °C TOTAL CONDUCTOR TEMPERATURE
SAE AS21004E-2023 TERMINAL, LUG, UNINSULATED, RECTANGULAR TONGUE, CRIMP STYLE, COPPER, TYPE I, CLASS 1, FOR 150 °C TOTAL CONDUCTOR TEMPERATURE
SAE AS25436A-2017 TERMINAL-LUG, CRIMP STYLE, 90° UPRIGHT TYPE, FOR ALUMINUM AIRCRAFT WIRE, CLASS 1
SAE AS21004D-2022 TERMINAL, LUG, UNINSULATED, RECTANGULAR TONGUE, CRIMP STYLE, COPPER, TYPE I, CLASS 1, FOR 150 °C TOTAL CONDUCTOR TEMPERATURE
SAE AS7928/7A-2014 TERMINAL LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER, TERMINAL LUG, CRIMP STYLE, COPPER, UNINSULATED, RING TONGUE TYPE I, CLASS 1 FOR 175 °C TOTAL CONDUCTOR TEMPERATURE
SAE AS7928/7-1999 Terminal Lug and Splices, Conductor, Crimp Style, Copper, Terminal Lug, Crimp Style, Copper, Uninsulated, Ring Tongue Type I, Class 1 for 175 Degrees C Total Conductor Temperature FSC 5940; Should Be Used Instead of MIL-T-7928/7, Which Was Cancelled on 3
SAE AS7928/11_A1-2008 Terminal, Lug, Crimp Style, Copper, Uninsulated, Ring Tongue, Tin Whisker Resistant, Type I, Class I, for 175 °C Total Conductor Temperature

SAE - SAE International, Wafer terminal

SAE J858A-2012 Electrical Terminals Blade Type
SAE J858A-1969 Electrical Terminals Blade Type@ Recommended Practice
SAE AS25189-2007 TERMINAL@ LUG@ FLAG TYPE@ CRIMP STYLE@ COPPER@ CLASS I
SAE AS25189-2008 TERMINAL@ LUG@ FLAG TYPE@ CRIMP STYLE@ COPPER@ CLASS I
SAE AS25189B-2019 TERMINAL@ LUG@ CRIMP STYLE@ COPPER@ UNINSULATED@ FLAG TONGUE@ SIZES 8-0000@ TYPE I@ CLASS I@ FOR 150 ?C TOTAL CONDUCTOR TEMPERATURE
SAE AS22520/5-2016 CRIMPING TOOLS@ TYPE 2@ TERMINAL@ HAND@ WIRE TERMINATION@ FOR COAXIAL@ TWINAXIAL@ TRIAXIAL@ SHIELDED CONTACTS AND FERRULES@ TERMINAL LUGS@ SPLICES AND END CAPS
SAE AS22520/5A-2017 CRIMPING TOOLS@ TYPE 2@ TERMINAL@ HAND@ WIRE TERMINATION@ FOR COAXIAL@ TWINAXIAL@ TRIAXIAL@ SHIELDED CONTACTS AND FERRULES@ TERMINAL LUGS@ SPLICES AND END CAPS
SAE AS70991A AMD 1-2007 Terminals: Lug and Splice@ Crimp Style@ Aluminum@ For Aluminum Aircraft Wire
SAE AS7928/4C-2015 TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER TERMINAL, LUG, INSULATED, RING TONGUE, BELL-MOUTHED, TYPE II, CLASS 1 (FOR 150 °C TOTAL CONDUCTOR TEMPERATURE)
SAE AS7928/4-A1-2004 Terminals@ Lug and Splices@ Conductor@ Crimp Style@ Copper Terminal@ Lug@ Insulated@ Ring Tongue@ Bell-Mouthed@ Type II@ Class 1 (for 150 Degrees C Total Conductor Temperature)
SAE AS25435A-2006 TERMINAL-LUG@ CRIMP STYLE@ STRAIGHT TYPE@ FOR ALUMINUM AIRCRAFT WIRE@ CLASS 1
SAE AS7928/4B-2015 TERMINALS@ LUG AND SPLICES@ CONDUCTOR@ CRIMP STYLE@ COPPER TERMINAL@ LUG@ INSULATED@ RING TONGUE@ BELL-MOUTHED@ TYPE II@ CLASS 1 (FOR 150 °C TOTAL CONDUCTOR TEMPERATURE)
SAE AS7928/1A-A1-2004 Terminals@ Lug and Splices@ Conductor@ Crimp Style@ Copper Terminal@ Lug@ Crimp Style@ Copper@ Insulated@ Ring Tongue@ for Thin Wall Wire@ Type II Class 1 for 105 Degrees C Total Conductor Temperature
SAE AS7928/1A-1999 Terminals@ Lug and Splices@ Conductor@ Crimp Style@ Copper Terminal@ Lug@ Crimp Style@ Copper@ Insulated@ Ring Tongue@ for Thin Wall Wire@ Type II Class 1 for 105 Degrees C Total Conductor Temperature
SAE AS7928/1-1999 Terminals@ Lug and Splices@ Conductor@ Crimp Style@ Copper Terminal@ Lug@ Crimp Style@ Copper@ Insulated@ Ring Tongue@ for Thin Wall Wire@ Type II Class 1 for 150 Degrees C Total Conductor Temperature
SAE ARP6807-2017 Guide for Identification of Terminal Lugs in Electrical Wiring Interconnect Systems (EWIS)
SAE AS25438A-2015 TERMINAL-LUG, CRIMP STYLE, RIGHT ANGLE TYPE, FOR ALUMINUM AIRCRAFT WIRE, CLASS 1
SAE AS25438-2002 TERMINAL-LUG@ CRIMP STYLE@ RIGHT ANGLE TYPE@ FOR ALUMINUM AIRCRAFT WIRE@CLASS 1
SAE AS25438B-2018 TERMINAL-LUG@ CRIMP STYLE@ RIGHT ANGLE TYPE@ FOR ALUMINUM AIRCRAFT WIRE@ CLASS 1
SAE AS7928/13B-2015 Terminals, Lug and Splices, Conductor, Crimp Style, Copper Terminal, Lug, Insulated, Tin Whisker Resistant, Ring, Tongue, Bell-Mouthed, Type II, Class 1 (for 150°C Total Conductor Temperature)
SAE AS7928/13A-2015 TERMINALS@ LUG AND SPLICES@ CONDUCTOR@ CRIMP STYLE@ COPPER TERMINAL@ LUG@ INSULATED@ TIN WHISKER RESISTANT@ RING TONGUE@ BELL-MOUTHED@ TYPE II@ CLASS 1 (FOR 105°C TOTAL CONDUCTOR TEMPERATURE)
SAE AS25436A-2006 TERMINAL-LUG@ CRIMP STYLE@ 90° UPRIGHT TYPE@ FOR ALUMINUM AIRCRAFT WIRE@ CLASS 1
SAE AS70991A-2006 Terminals: Lug and Splice@ Crimp Style@ Aluminum@ For Aluminum Aircraft Wire (FSC 5940)
SAE AS25436B-2018 TERMINAL-LUG@ CRIMP STYLE@ 90° UPRIGHT TYPE@ FOR ALUMINUM AIRCRAFT WIRE@ CLASS 1
SAE AS21004A-2014 TERMINAL, LUG, UNINSULATED, RECTANGULAR TONGUE, CRIMP STYLE, COPPER, TYPE I, CLASS 1, FOR 150 °C TOTAL CONDUCTOR TEMPERATURE
SAE AS21004B-2016 TERMINAL, LUG, UNINSULATED, RECTANGULAR TONGUE, CRIMP STYLE, COPPER, TYPE I, CLASS 1, FOR 150 °C TOTAL CONDUCTOR TEMPERATURE
SAE AS21004C-2016 TERMINAL@ LUG@ UNINSULATED@ RECTANGULAR TONGUE@ CRIMP STYLE@ COPPER@ TYPE I@ CLASS 1 FOR 175 °C TOTAL CONDUCTOR TEMPERATURE

International Truck and Engine Corporation (ITEC), Wafer terminal

INTERN TMS 1065-2008 Tapered Roller Bearings for Wheel End Applications

CZ-CSN, Wafer terminal

CSN ONA 02 8489-1967 Control cable connection. Control cable cylindrical end piece
CSN 13 3041-1983 Flanged-end, wafer and welding-end valves. Specification and tolerances for face-to--face dimension
CSN IEC 248:1994 Dimension of planchets used in nuclear electronic instruments
CSN 13 3041 Z1-1997 Flanged-end, wafer and welding-end valves. Specification and tolerances for face-to-face dimensions

International Federation of Trucks and Engines, Wafer terminal

NAVISTAR TMS 1065-2012 Tapered Roller Bearings for Wheel End Applications

U.S. Military Regulations and Norms, Wafer terminal

ARMY A-A-59126/26 B-2012 TERMINALS, STUD (NONINSULATED), (CIRCULAR, GROUND) STYLE SE26
ARMY A-A-59125/7 VALID NOTICE 1-2011 Terminal Lugs, Solder Type, Styles TBLD and TBLS
ARMY MIL-HDBK-1277 VALID NOTICE 1-2013 Splices, Chips, Terminals, Terminal Boards, Binding Posts, Electrical

Defense Logistics Agency, Wafer terminal

DLA MIL-DTL-15659 J VALID NOTICE 1-2008 Terminal, Lug: Solder, Copper and Phosphor Bronze
DLA MIL-DTL-15659 J VALID NOTICE 2-2013 Terminal, Lug: Solder, Copper and Phosphor Bronze
DLA MS35430 REV C VALID NOTICE 1-2008 Terminal, Lug, Solder Type, Copper Stamping, One Hole
DLA MS35430 REV C VALID NOTICE 2-2013 Terminal, Lug, Solder Type, Copper Stamping, One Hole
DLA MS51535 REV C VALID NOTICE 1-2008 Terminal, Lug, Solder Type, Copper Stamping, Two Hole, 30 Degrees
DLA MS51536 REV C VALID NOTICE 1-2008 Terminal, Lug, Solder Type, Copper Stamping, Two Hole, 45 Degrees
DLA MS51535 REV C VALID NOTICE 2-2013 Terminal, Lug, Solder Type, Copper Stamping, Two Hole, 30 Degrees
DLA MS51536 REV C VALID NOTICE 2-2013 Terminal, Lug, Solder Type, Copper Stamping, Two Hole, 45 Degrees
DLA MS35440 REV B VALID NOTICE 1-2008 Terminal, Lug, Solder Type, Copper Stamping, Insulation Grip, Slotted
DLA MS35440 REV B VALID NOTICE 2-2013 Terminal, Lug, Solder Type, Copper Stamping, Insulation Grip, Slotted
DLA MS35431 REV H VALID NOTICE 1-2008 Terminal, Lug, Solder Type, Copper Stamping, One Hole, Flat
DLA MS35431 REV H VALID NOTICE 2-2013 Terminal, Lug, Solder Type, Copper Stamping, One Hole, Flat
DLA MIL-T-55156 VALID NOTICE 3-2008 Terminals, Lug; Splices, Conductor; Screw Type, General Specification for
DLA AN5548 REV 2 VALID NOTICE 4-2013 Terminal - Lug, Thermocouple, Chromel and Alumel
DLA MIL-T-55156 VALID NOTICE 4-2013 Terminals, Lug; Splices, Conductor; Screw Type, General Specification for
DLA MIL-DTL-83528/12 D-2013 GASKETING MATERIAL, CONDUCTIVE, SHIELDING GASKET, ELECTRONIC, ELASTOMER, ELECTRICAL, EMI/RFI, FLAT CIRCULAR WASHER
DLA MIL-DTL-83528/1 E-2013 GASKETING MATERIAL, CONDUCTIVE, SHIELDING GASKET, ELECTRONIC, ELASTOMER, EMI/RFI, CIRCULAR STRIP, .040 THROUGH .250 DIAMETER
DLA MIL-DTL-15659J SUPP 1-2003 TERMINAL, LUG: SOLDER, COPPER AND PHOSPHOR BRONZE [Use In Lieu Of: DLA MIL-T-0015659E]
DLA MS35436 REV C VALID NOTICE 1-2008 Terminal, Lug, Solder Type, Copper Stamping, Insulation Grip, One Hole
DLA MS35436 REV C VALID NOTICE 2-2013 Terminal, Lug, Solder Type, Copper Stamping, Insulation Grip, One Hole
DLA SMD-5962-87571 REV H-2013 MICROCIRCUIT, LINEAR, RADIATION HARDENED, TWO TERMINAL TEMPERATURE TRANSDUCER, MONOLITHIC SILICON
DLA MS77068 REV B VALID NOTICE 1-2008 Terminal, Lug, Solder Type, Phosphor Bronze Stamping, Locking Type, 45 Degrees, Two Hole
DLA MS77068 REV B VALID NOTICE 2-2013 Terminal, Lug, Solder Type, Phosphor Bronze Stamping, Locking Type, 45 Degrees, Two Hole
DLA MS77074 REV B VALID NOTICE 1-2008 Terminal, Lug, Solder Type, Phosphor Bronze Stamping, Insulation Grip. Locking Type
DLA MS77074 REV B VALID NOTICE 2-2013 Terminal, Lug, Solder Type, Phosphor Bronze Stamping, Insulation Grip. Locking Type
DLA MIL-PRF-64266/10-2008 CONNECTORS, FIBER OPTIC, CIRCULAR, PLUG STYLE, MULTIPLE REMOVABLE TERMINI, DUST COVER, SCREW THREADS, ENVIRONMENT RESISTING
DLA MIL-PRF-64266/2 A-2012 CONNECTORS, FIBER OPTIC, CIRCULAR, PLUG STYLE, MULTIPLE REMOVABLE GENDERLESS TERMINI, SCREW THREADS, ENVIRONMENT RESISTING
DLA MIL-PRF-64266/11 A-2012 CONNECTORS, FIBER OPTIC, CIRCULAR, RECEPTACLE STYLE, MULTIPLE REMOVABLE TERMINI, DUST COVER, SCREW THREADS, ENVIRONMENT RESISTING
DLA MIL-PRF-64266/10 A-2012 CONNECTORS, FIBER OPTIC, CIRCULAR, PLUG STYLE, MULTIPLE REMOVABLE TERMINI, DUST COVER, SCREW THREADS, ENVIRONMENT RESISTING
DLA MIL-PRF-64266/17-2010 CONNECTORS, FIBER OPTIC, CIRCULAR, RECEPTACLE STYLE, MULTIPLE REMOVABLE TERMINI, DUMMY STOWAGE, SCREW THREADS, ENVIRONMENT RESISTING

Korean Agency for Technology and Standards (KATS), Wafer terminal

KS C 2620-2011(2021) Crimp-type terminal lugs for copper conductors

Aerospace Industries Association, Wafer terminal

AIA NAS 1494-1961 Terminal, Lug - Single Hole Tongue, Single Barrel, Pressure Grip Type R(1980)
AIA NASM77072-2001 Terminal, Lug, Solder Type, Phosphor Bronze Stamping, Locking Type, Flat, One Hole FSC 5940
AIA NASM77073-2001 Terminal, Lug, Solder Type, Phosphor Bronze Stamping, Locking Type Flat, One Hole FSC 5940

AIA/NAS - Aerospace Industries Association of America Inc., Wafer terminal

NAS1494-1961 Terminal@ Lug - Single Hole Tongue@ Single Barrel@ Pressure Grip Type
NAS1494-2014 TERMINAL@ LUG@ SINGLE HOLE TONGUE@ SINGLE BARREL@ PRESSURE GRIP TYPE (Rev 2)
NASM77073-2001 Terminal@ Lug@ Solder Type@ Phosphor Bronze Stamping@ Locking Type Flat@ One Hole

PL-PKN, Wafer terminal

PN D56052-1992 Woodworking machines. Spindle noses for fastening circular sawblades. Dimensions

Aerospace Industries Association/ANSI Aerospace Standards, Wafer terminal

AIA/NAS NAS1494-2014 TERMINAL, LUG, SINGLE HOLE TONGUE, SINGLE BARREL, PRESSURE GRIP TYPE (Rev 2)
AIA/NAS NAS1494-2010 TERMINAL, LUG, SINGLE HOLE TONGUE, SINGLE BARREL, PRESSURE GRIP TYPE Rev. 1
AIA/NAS NASM77073-2014 TERMINAL, LUG, SOLDER TYPE, PHOSPHOR BRONZE STAMPING, LOCKING TYPE FLAT, ONE HOLE (Rev 2)

IT-UNI, Wafer terminal

Electronic Components, Assemblies and Materials Association, Wafer terminal

ECA J-STD-002B-2003 Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires
ECA J-STD-002C-2007 Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires
ECA EIA-198-3-10-2015 Multilayer (Monolithic), Unencapsulated, Ceramic Dielectric, Surface-Mount Low Induction Chip Capacitors and Multi-Terminal Low Induction Capacitors

United States Navy, Wafer terminal

NAVY MIL-DTL-22520/40 VALID NOTICE 1-2013 Crimping Tools, Terminal, Hand, Wire Termination; Type II T-Head for Terminal Lugs and Splices Size 22-14
NAVY QPL-AS7928-2 NOTICE 1-2009 Terminals, Lug: Splices, Conductor: Crimp Style, Copper, General Specification for
NAVY QPL-AS7928-2011 TERMINALS, LUG: SPLICES, CONDUCTOR: CRIMP STYLE, COPPER, GENERAL SPECIFICATION FOR
NAVY QPL-AS7928-2013 TERMINALS, LUG: SPLICES, CONDUCTOR: CRIMP STYLE, COPPER, GENERAL SPECIFICATION FOR
NAVY QPL-28876-QPD-2011 CONNECTORS, FIBER OPTIC, CIRCULAR, PLUG AND RECEPTACLE STYLE, MULTIPLE REMOVABLE TERMINI, GENERAL SPECIFICATION FOR

RO-ASRO, Wafer terminal

STAS 12662-1988 RECIRCULATING STRAIGHT LINE CYLINDRICAL ROLLER TRANSLATION GUIDES Dimensions
STAS 10477-1992 Woodworking tools. Circular blades with carbides tips. General technical requirment for quality
STAS 9859-1974 ELECTRONIC. COMPONENTS Mcasurcmcnt of the dimensions of a cylindrical component having two axial tcrminations

International Organization for Standardization (ISO), Wafer terminal

ISO 6262-1:2013 End mills with indexable inserts.Part 1: End mills with flatted cylindrical shank
ISO 12043:1995 Roller bearings - Single-row cylindrical roller bearings - Chamfer dimensions for loose rib and non-rib sides

Association Francaise de Normalisation, Wafer terminal

NF E66-252-1*NF ISO 6262-1:2014 End mills with indexable inserts - Part 1 : end mills with flatted cylindrical shank
NF EN 3373-011:2009 Série aérospatiale - Cosses et prolongateurs pour sertissage sur conducteurs électriques - Partie 011 : cosses, rondes, nickelées pour sertissage sur conducteurs en cuivre, température jusqu'à 260oC pour bornages filetés en métriques et en pou...
NF EN 3373-010:2009 Série aérospatiale - Cosses et prolongateurs pour sertissage sur conducteurs électriques - Partie 010 : cosses, rondes, étamées pour sertissage sur conducteurs en cuivre, température jusqu'à 150oC pour bornages filetés en métriques et en pouc...
NF C96-435-5*NF EN 62435-5:2017 Electronic components - Long-term storage of electronic semiconductor devices - Part 5 - die and wafer devices
NF EN 62435-5:2017 Composants électroniques - Stockage de longue durée des dispositifs électroniques à semiconducteurs - Partie 5 - dispositifs de puces et plaquettes
NF EN 3373-008:2013 Série aérospatiale - Cosses et prolongateurs pour sertissage sur conducteurs électriques - Partie 008 : cosses en cuivre nickelé, à plages rondes pour sertissage sur câbles en cuivre nickelé pour bornages en inches température jusqu'à 340 oC ...
FD E86-400-5*FD CEN /TR 1591-5:2012 Flanges and their joints - Design rules for gasketed circular flange connections - Part 5 : calculation method for full face gasketed joints
NF E22-386*NF ISO 12043:2007 Rolling bearings - Single-row cylindrical roller bearings - Chamfer dimensions for loose rib and non-rib sides.
NF C93-413:1985 Electromechanical components for electronic equipment of assessed quality. Rotary wafer switches. General requirements.

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Wafer terminal

IPC J-STD-002C-2007 Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires

IPC - Association Connecting Electronics Industries, Wafer terminal

IPC/JEDEC J-STD-002D-2013 Solderability Tests for Component Leads@ Terminations@ Lugs@ Terminals and Wires
IPC EIA/IPC/JEDEC J-STD-002E-2017 Solderability Tests for Component Leads@ Terminations@ Lugs@ Terminals and Wires
IPC J-STD-002A-1998 Solderability Tests for Component Leads@ Terminations@ Lugs@ Terminals and Wires
IPC EIA/IPC/JEDEC J-STD-002D CHINESE-2013 Solderability Tests for Component Leads@ Terminations@ Lugs@ Terminals and Wires
IPC/JEDEC J-STD-002D ERTA-2014 Solderability Tests for Component Leads@ Terminations@ Lugs@ Terminals and Wires
IPC J-STD-002-1992 Solderability Tests for Component Leads@ Terminations@ Lugs@ Terminals and Wires
IPC J-STD-002D CD-2013 Solderability Tests for Component Leads@ Terminations@ Lugs@ Terminals and Wires
IPC EIA/IPC/JEDEC J-STD-002D CHINESE-2017 Solderability Tests for Component Leads@ Terminations@ Lugs@ Terminals and Wires
IPC J-STD-002C AMD 1-2008 Solderability Tests for Component Leads@ Terminations@ Lugs@ Terminals and Wires Amendment 1

ECIA - Electronic Components Industry Association, Wafer terminal

J-STD-002B-2003 Solderability Tests for Component Leads@ Terminations@ Lugs@ Terminals and Wires
EIA-198-3-10-2015 Multilayer (Monolithic)@ Unencapsulated@ Ceramic Dielectric@ Surface-Mount Low Induction Chip Capacitors and Multi-Terminal Low Induction Capacitors

American National Standards Institute （ANSI), Wafer terminal

ANSI/IPC/EIA J-STD-002B-2003 Solderability Tests for Component Leads, Terminations, Lugs, Terminals, and Wires

JP-JARI, Wafer terminal

JRIS R 0136-2006 Rolling stock-Crimp-type terminal lugs and sleeves

VN-TCVN, Wafer terminal

TCVN 3960-1984 End cylindrical keyway mills with carbide tipped blades.Basic dimensions

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Wafer terminal

JEDEC JEP160-2011 Long-Term Storage for Electronic Solid-State Wafers, Dice, and Devices

KR-KS, Wafer terminal

KS C IEC 60294-2003(2023)

RU-GOST R, Wafer terminal

GOST 29132-1991 Straight turning, undercutting and copying tool holders with indexable inserts. Types and dimensions
GOST 22088-1976 End face milling cutters with mechanical fastening of round carbide blades. Construction and dimensions
GOST 28719-1990 Shell type helical end mills with indexable carbide inserts. Specifications
GOST 28980-1991 Cutters for external turning with super hand materials inserts. Types and basic dimensions
GOST 16223-1981 Shell end milling cutters with inserted carbide blades for machining light alloys. Types and dimensions
GOST 27301-1987 Carbide indexablle cutting inserts with rounded corner, with one-sided toroidal fixing hole. Design and dimensions

IN-BIS, Wafer terminal

IS 8964 Pt.15-1978

ES-UNE, Wafer terminal

UNE-EN 175301-801:2006 Detail Specification: High density rectangular connectors, round removable crimp contacts (Endorsed by AENOR in March of 2007.)
UNE-EN 62435-5:2017 Electronic components - Long-term storage of electronic semiconductor devices - Part 5: Die and wafer devices (Endorsed by Asociación Española de Normalización in May of 2017.)
UNE-EN 3373-007:2012 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 007: Nickel plated aluminium terminal lugs for crimping on nickel plated aluminium cable for inch series studs - Product standard (Endorsed by AENOR in Apri...

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Wafer terminal

GB/T 12775-1991 Generc specification for dise-style ceramic dielectric variable pre-aet capacitors in electronic equipments
GB/T 20057-2012 Rolling bearings.Single-row cylindrical roller bearings.Chamfer dimensions for loose rib and non-rib sides
GB/T 42706.5-2023 Long-term storage of electronic components and semiconductor devices - Part 5: Chips and wafers
GB/T 20057-2006 Rolling bearings.Single-row cylindrical roller bearings.Chamfer dimensions for loose rib and non-rib sides

PH-BPS, Wafer terminal

PNS IEC 62435-5:2021 Electronic components - Long-term storage of electronic semiconductor devices - Part 5: Die and wafer devices

Danish Standards Foundation, Wafer terminal

DS/CEN/TR 1591-5:2012 Flanges and their joints - Design rules for gasketed circular flange connections - Part 5: Calculation method for full face gasketed joints

AENOR, Wafer terminal

UNE-CEN/TR 1591-5:2013 IN Flanges and their joints - Design rules for gasketed circular flange connections - Part 5: Calculation method for full face gasketed joints

British Standards Institution (BSI), Wafer terminal

BS 5692:1979 Method for measurement of the dimensions of a cylindrical electronic component having two axial terminations

ZA-SANS, Wafer terminal

SANS 1700-12-8:1996 Fasteners Part 12: Set screws Section 8: Slotted set screws with long dog point
SANS 12043:2006 Rolling bearings - Single-row cylindrical roller bearings - Chamfer dimensions for loose rib and non-rib sides

Professional Standard - Electron, Wafer terminal

SJ/T 10876-1996 Detailed specifications for electronic components - CT52 disc feed-through ceramic dielectric capacitors (Applicable for certification)
SJ/T 10875-1996 Detailed specifications for electronic components - CC52 disc feed-through ceramic dielectric capacitors (Applicable for certification)

工业和信息化部, Wafer terminal

SJ/T 10876-2020 Detailed specification for electronic components CT52 type wafer through-core ceramic capacitors evaluation level EZ
SJ/T 10875-2020 Detailed specification for electronic components CC52 type wafer through-core ceramic capacitors evaluation level EZ