ZH
RU
ES

astm thread

astm thread, Total:498 items.

In the international standard classification, astm thread involves: Screw threads, Fasteners for aerospace construction, Fasteners, Vocabularies, Technical drawings, Cutting tools, Hand-held tools, Valves, Linear and angular measurements, Bottles. Pots. Jars, Aerospace electric equipment and systems, Pipeline components and pipelines, Ground service and maintenance equipment, Materials and components for railway engineering, Rubber and plastics products, Non-ferrous metals, Electromechanical components for electronic and telecommunications equipment, Machine tool systems, Tobacco, tobacco products and related equipment, Cycles.

American Society of Mechanical Engineers (ASME), astm thread

ASME SEC II A SA-354-2002 Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners ASTM A354-00a
ASME SEC II A SF-568-2003 Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners ASTM F 568M-98
ASME B18.6.5M-2000 Metric thread-forming and thread-cutting tapping screws
USAS B2.1-1968 Pipe Threads (Except DryseaI)
ASME B18.6.5M-1986 Metric thread forming and thread cutting tapping screws
ASME B1.15 ERTA-1997 Unified Inch Screw Threads (UNJ Thread Form)
ASME B1.1-1989 Unified inch screw threads (UN and UNR thread form)
ASME B1.1-1935 Unified Inch Screw Threads, UN and UNR Thread Form
ASME B1.15-1995 Unified Inch Screw Threads (UNJ Thread Form)
ASME B1.1-2019 Unified Inch Screw Threads (UN, UNR, and UNJ Thread Forms)
ASME B1.5-1988 Acme screw threads
ASME B1.5-1997 Acme Screw Threads
ASME B1.5-1999 Acme Screw Threads
ASME B1.5-1997(R2014) Acme Screw Threads

CH-SNV, astm thread

VSM 12041-1967
VSM 13190.4-1967
SN 258 405-1979 Die Angaben in dieser Norm entsprechen weitgehend den Fest-legungen der von der Internationalen Organisation für Nor-mung, ISO, herausgegebenen Internationalen Norm ISO 1829 ■ 1975. (Siehe Erl?uterungen.)
VSM 10315.3-1953
SEV 3031-1963
SN 029 100-1983 This standard is a translation of the original bilingual (German/French) Swiss Standard
SN 213 163-1979
VSM 18900-1973
VSM 10336.16-1946
SNV 24522-1937

Standard Association of Australia （SAA）, astm thread

AS 1722.2:1992 Pipe threads of Whitworth form - Fastening pipe threads
AS 1722.1:1975 Pipe threads of Whitworth form Part 1: Sealing pipe threads (metric units)
AS/NZS 4411:2015 Tapping screws thread
AS/NZS 4411:1996 Tapping screws thread

AT-ON, astm thread

ONORM M 2012-1983 Tapped holes and screwed plugs with metric pipe thread, fine, for pipe unions, jitüngs and screw plugs; design dimensions
ONORM M 1530-1979 Thread and thread endsfor wood screws
ONORM M 1500-1973 ISO metric screw threads; thread profile Filetages me'triques ISO; profil de filetage
ONORM M 1515-1968
ONORM M 1900-1980 Sealing rings for screwed pipe ions and screw plugs
ONORM M 1804-1987 Thread ends and lengths of holt ends for metric ISO-threads
ONORM ISO 1478:1986 Tapping screws thread Filetage de vis ? t?le
ONORM M 5251-1965 Die Schlüsselweiten der Hutmuttern entsprechen der ISO-Empfehlung R 272. Bis zum 31. 12. 1965 dürfen die Hutmuttern M 8 und M 8X. 1 noch mit der Schlüsselweite s = 14 mm geliefert werden.
ONORM M 1490-1986 Screw threads; survey

German Institute for Standardization, astm thread

DIN 76-3:1977 Runouts, Undercuts for Trapezoidal Threads, Buttress Threads and Knuckle Threads and other Threads of Coarse Pitch
DIN 7965:1965 Screwed Inserts (Screw Plugs)
DIN 7965:1965-09 Screwed Inserts (Screw Plugs)
DIN 2244:2002 Screw threads - Terms and screw thread elements for parallel screw threads
DIN 2244:2002-05 Screw threads - Terms and screw thread elements for parallel screw threads
DIN 7998:1975 Threads and Thread Ends for Wood Screws
DIN 7998:1975-02 Threads and Thread Ends for Wood Screws
DIN 16261:2023-02 PN 16 cocks with female/female and female/male connection for pressure gauges / Note: Date of issue 2023-01-13*Intended as replacement for DIN 16261 (2004-07).
DIN 16261:2004-07 PN 16 cocks with female/female and female/male connection for pressure gauges / Note: To be replaced by DIN 16261 (2019-07), DIN 16261 (2023-02).
DIN ISO 6410-2:1993 Technical drawings; screw threads and threaded parts; screw thread inserts; identical with ISO 6410-2:1993
DIN 5606-2:1975-03 Gauging of threads on workpieces for railway vehicles; round thread, acme thread, rounded acme thread
DIN 16261:2004 PN 16 cocks with female/female and female/male connection for pressure gauges
DIN 2999-1:1983 Pipe threads for tubes and fittings; parallel internal thread and taper external thread; tread dimensions
DIN 8140-2:2005-08 Wire thread inserts for ISO metric screw threads - Part 2: Helical coil threads for inserts, thread tolerances
DIN 76-3:1977-01 Runouts, Undercuts for Trapezoidal Threads, Buttress Threads and Knuckle Threads and other Threads of Coarse Pitch
DIN 40431-2:1972-11 Steel Conduit Thread; Thread Gauges, "Go" and "Not go" Thread Plug Gauges
DIN 40431-1:1970-11 Steel Conduit Thread; Thread Gauges, "Go" and "Not go" Thread Ring Gauges
DIN 513-1:1985 Metric buttress threads; thread profiles
DIN 3858:1988 Whitworth pipe threads for pipe couplings; parallel internal threads and taper external threads; thread dimensions
DIN 8140-2:2005 Wire thread inserts for ISO metric screw threads - Part 2: Helical coil threads for inserts, thread tolerances
DIN 40431-2:1972 Steel Conduit Thread; Thread Gauges, "Go" and "Not go" Thread Plug Gauges
DIN 86103:2019-09 Sockets for screwed ends with metric fine thread and Whitworth pipe thread
DIN 80705:2018-07 Thin nuts with small widths across flats - Coarse pitch thread, fine pitch thread
DIN 405-3:1997 General purpose knuckle threads - Part 3: Gauges for external and internal thread; types of gauges, profiles, tolerances
DIN 5606-2:1975 Gauging of threads on workpieces for railway vehicles; round thread, acme thread, rounded acme thread
DIN 2981:1982 Theraded steel pipe fittings; Fittings with long screw thread
DIN 103-2:1977 ISO Metric Trapezoidal Screw Thread; General Plan
DIN 380-1:1985-04 Stub metric trapezoidal screw threads; thread profiles
DIN 76-1:2016 Thread run-outs and thread undercuts - Part 1: For ISO metric threads in accordance with DIN 13-1
DIN 76-1:2004 Thread run-outs and thread undercuts - Part 1: For ISO metric threads in accordance with DIN 13-1
DIN 3858:2005 Whitworth pipe threads for pipe unions - Parallel internal thread and taper external thread - Dimensions
DIN 40431-1:1970 Steel Conduit Thread; Thread Gauges, "Go" and "Not go" Thread Ring Gauges
DIN 380-1:1985 Stub metric trapezoidal screw threads; thread profiles
DIN EN ISO 1478:1999 Tapping screw thread (ISO 1478:1999); German version EN ISO 1478:1999
DIN 802-5:1997 Tolerances on the threaded portion of tape - Part 5: Ground threaded taps for ISO metric thread; threads for interference fits according to DIN 8141-1, coarse and fine pitches; manufacturing tolerances on the threaded portion
DIN 30387:1976 Shouldered nuts; metric fine thread, rounded acme thread
DIN 30387:2007 Shouldered nuts - Metric fine thread, rounded acme thread
DIN 30387:2007-06 Shouldered nuts - Metric fine thread, rounded acme thread
DIN 76-2:1984-12 Thread run-outs and thread undercuts for pipe threads conforming to ISO 228 part 1
DIN ISO 6410-2:1993-12 Technical drawings; screw threads and threaded parts; screw thread inserts; identical with ISO 6410-2:1993
DIN 8140-2 Berichtigung 1:2017-03 Wire thread inserts for ISO metric screw threads - Part 2: Helical coil threads for inserts, thread tolerances, Corrigendum to DIN 8140-2:2005-08
DIN 20400:1990 Knuckle threads for the mining; threads with large load-bearing depth
DIN 405-1:1997 General purpose knuckle threads - Part 1: Profiles, nominal sizes
DIN 2279:2001-12 Geometrical Product Specifications (GPS) - Gauges for ISO metric screw threads - Gauging of the internal and external threads; Survey, inscription, marking, application
DIN 3858:2005-08 Whitworth pipe threads for pipe unions - Parallel internal thread and taper external thread - Dimensions
DIN 852-1:1991 Bore type thread milling cutters for ISO metric threads; dimensions
DIN 513-1:2020 Metric buttress threads - Part 1: Thread profiles
DIN 80705:1990 Thin nuts with coarse pitch and fine pitch thread and with small widths across flats
DIN 80705:2018 Thin nuts with small widths across flats - Coarse pitch thread, fine pitch thread
DIN 3852-11:1994 Screwed stud-ends; tapped holes; for compression fittings, valves, screw plugs, screwed stud-ends type E; design dimensions
DIN 81408:1978 Screwing-hooks
DIN EN 10241:2000 Steel threaded pipe; German version EN 10241:2000

CZ-CSN, astm thread

CSN ON 22 3214-1968
CSN 01 4009-1964 Metric thread - assortment for production thread and thread gauge
CSN ON 22 3213-1967
CSN 01 4311-1962 Matching of threads. Deviation of major diameter of bolt thre ad and of minor diameter of nut threada
CSN 22 3207-1976 Thread-cutting die. Tolerances on the threaded portion for metric threads
CSN 25 4621-1960 Screw gauges. Screw pitch gauges for whitworth thread and pipe thread
CSN 22 3009-1983 Taps for cylindrical pipe thread. Thread tolerances
CSN 01 4306-1962 Matohing of threads. Fita of metrie threads
CSN ON 22 3322-1963
CSN 01 4304-1962 Matehing of threada. Length of engagement of threada
CSN 01 4305-1962 Matching of threads. Marks for thread matching
CSN 01 4332-1962 Matching of threads. Limit deviationa of matric threads of bolts Sn
CSN 01 4346-1964 Matching of threads. Limit deviations of Whitworth nut threads
CSN 02 1065-1953 Screws and nuts. Matching of thread
CSN 13 8244-1983 Keduoing nipples with external threads
CSN ON 22 8708-1966
CSN 01 4312-1962 Matching of threads. Limit deviationa of minor diameter of bolt thread
CSN 01 4325-1962 Matching of threads. Limit deviations of nut metric threads of fits SH
CSN 13 8262-1976 Corner screwing with gasket with internal threads
CSN 13 8263-1976 Corner serewing with gasket with internal and external threads
CSN ON 22 3323-1963
CSN 13 7962-1959 Soldered machine engineering pipe unions. Shift plugs for light plug unions
CSN 01 4328-1962 Matching of threads. Limit deviation of metric threads of bolts So 8
CSN 01 4333-1962 Matching of threads. Limit devialions of metric threads of bolts Sp
CSN 01 4330-1962 Matching of threads. Limit deviationa of metric threeds of bolts S
CSN 01 4055-1986 Ball thread
CSN 01 4037-1978 Round thread
CSN 44 9182-1960 Threaded branch.
CSN ON 22 3321-1963
CSN 13 8260-1988 Straight screwing with gaskct with in-ternal threads
CSN 25 4109-1962 Rules for adapting thread gauges for new ISO thread profile
CSN 01 4329-1962 Matching of threads. Limit deviations of metric threads of bolts Sd 8
CSN 25 4620-1960 Screw gauges. Screw pitch gauges for metric thread
CSN 13 8281-1986 Locking nuts with pipe threads
CSN 25 4025-1973 Screw gauges. Solid GO screw ring gauge. Metric screw thread diameter 1 mm to 100 mm
CSN 25 4035-1973 Screw gauges. Solid NOT GO screw ring gauge. Metric screw thread diameter 1 mm to 100 mm
CSN 25 4080-1987 Solid GO screw ring gauges. Trapezoidal screw threads
CSN 13 8261-1988 Straight screwing with gasket with in-ternal and external threads
CSN 25 4128-1964 Limit thread calliper gauges. Metric thread M 3 to M 100
CSN 01 4327-1962 Matching of threada. Limit deviations of outaide metrio threads of bolts Sh
CSN 13 7856-1962 Threaded flanges
CSN 11 0808-1959
CSN 01 4035-1952 Armoured thread
CSN 25 4354-1983 Gauges for edison screw
CSN 22 3410-1987 Thread cutting tools. Metric thread roller dies
CSN 01 4052-1966 Buttres thread
CSN 01 4030-1988 Whitworth screw threads
CSN 01 4001-1994 Screw threads. Terminology

Association Francaise de Normalisation, astm thread

NF L05-020:1954 Screw threads. Thread run-outs (rech.).
NF E03-005:1981 Pipe threads where pressure tight joints are not made on the threads (parallel internal and external threads).
NF L05-020:1966 SCREW THREADS. THREAD RUN-OUTS. (RECH.).
NF L22-208:1984 Bolt, hexagonal head, threaded to head. ISO thread.
NF ISO 2901:2016 Filetages métriques trapézoïdaux ISO - Profils de base et nominal
NF L22-293:1979 Slotted cheese ehad screws, fully threaded. ISO thread.
NF E66-120:1975 Hand taps for pipe threads for parallel and taper threads.
NF E03-004:1981 Pipe threads where pressure tight joints are made on the threads (tapered external thread and parallel internal thread).
NF L22-294:1979 Slotted raised cheese head screws, fully threaded. ISO thread.
NF L05-110:1966 SCREW THREADS. SELECTION FOR AIRCRAFT INDUSTRY. (RECH.).
NF EN ISO 6410-2:1996 Dessins techniques - Filetages et pièces filetées - Partie 2 : inserts filetés.
NF L22-291:1979 Slotted 90 degrees countersunk head screws, fully threaded. ISO thread.
NF L22-292:1979 Slotted 60 degrees countersunk head screws, fully threaded. ISO thread.
NF L22-298:1979 Hexagon socket head cap screws, fully threaded. ISO thread.
NF L22-209:1984 Bolt, hexagonal head, with locking hole threaded to head. ISO thread.
NF L22-201:1984 Bolt, hexagonal head, short thread, close tolerance. ISO thread.
NF H35-131*NF EN 16292:2013 Glass packaging - Screw finishes - Depressed threads
NF L22-296:1979 Slotted and drilled cheese head screws, fully threaded. ISO thread.
NF L22-275:1982 Pan head screws, fully threaded,B.N.A.E. Cross recess. ISO thread.
NF L05-200:1952 Metric screw threads. Sim profile (rech.).
NF L05-200:1966 METRIC SCREW THREADS. SIM PROFILE. (RECH.).
NF E25-650-2:1994 TAPPING SCREWS THREAD. (EUROPEAN STANDARD EN ISO 1478).
NF E03-004-1*NF EN 10226-1:2004 Pipe threads where pressure tight joints are made on the threads - Part 1 : taper external threads and parallel internal threads - Dimensions, tolerances and designation.
NF E03-152:1981 Thread checking with limit gauges. Threaded gauges for screw.
NF L22-202:1984 Bolt, hexagonal head, short thread, close tolerance with locking hole. ISO thread.
NF E03-620:1997 Checking of ISO metric trapezoidal threads with gauges. Screw gauges for internal threads.
NF EN 10226-1:2004 Filetages de tuyauterie pour raccordement avec étanchéité par le filetage - Partie 1: filetages extérieurs coniques et filetages intérieurs cylindriques - Dimensions, tolérances et désignation
NF L05-110:1953 Screw threads. Selection for aircraft industry (rech.).
NF F00-032:1992 Matériel ferroviaire en général - Filetages à filet rond - Profil.
NF E03-619:1997 Checking of ISO metric trapezoidal threads with gauges. Screw gauges for external threads.
NF E03-056:1970 ISO SYSTEM OF TOLERANCES FOR SCREW THREADS. COARSE QUALITY 7H/8 G FOR SCREWS AND BOLTS.
NF EN 10226-2:2005 Filetages de tuyauteries pour raccordement avec étanchéité par le filetage - Partie 2 : filetages extérieurs coniques et filetages intérieurs coniques - Dimensions, tolérances et désignation
NF E03-500*NF ISO 1501:2009 ISO miniature screw threads
NF L05-420:1955 Buttress screw threads.
FD E03-003:2006 Screw threads - References of main standardized foreign screw threads
FD E03-003:2022 Filetages - Références des principaux filetages étrangers normalisés
NF L22-259:1982 100 degrees countersunk head screws, fully threaded B.N.A.E. Cross recess. ISO thread.
NF E03-153:1975 Checking of threads with limit gauges-threaded gauges for nuts.
NF E25-650-2*NF EN ISO 1478:1999 Tapping screw thread

U.S. Military Regulations and Norms, astm thread

ARMY MIL-I-45916 B-1975 INSERT, SCREW THREAD - THREAD CUTTING AND THREAD FORMING
ARMY MS35914 REV F-1977 INSERT, SCREW THREAD - THREAD CUTTING
ARMY A-A-59326/14 B-2011 REDUCER, EXTERNAL PIPE THREAD BY FEMALE, TYPE XIII
ARMY A-A-59326/12 B-2011 REDUCER, MALE BY FEMALE AND FEMALE BY MALE, TYPE XI
ARMY A-A-59326/1 B-2011 COUPLING HALF, MALE BY INTERNAL PIPE THREAD, TYPE I
ARMY A-A-59326/12 A VALID NOTICE 1-2008 REDUCER, MALE BY FEMALE AND FEMALE BY MALE, TYPE XI

SE-SIS, astm thread

SIS SMS 300-1931
SIS SMS 1947-1969 Continuous thread studs. Inch screw threads. Coarse pitch
SIS SS 1702-1980 Screw threads and screw thread tolerances — Terminology
SIS SMS 1702-1966 Screw threads and screw thread tolerances. Vocabulary
SIS SMS 572-1971 Short screwing taps. Metric screw threads. Fine pitch
SIS SMS 571-1971 Short screwing taps. Metric screw threads. Coarse pitch
SIS SS 1964-1989 Threaded blind holes — ISO metric screw threads — Coarse pitch
SIS SMS 1964-1976 Threaded blind holes. ISO metric screw threads. Coarse pitch
SIS SMS 574-1971 Short screwing taps. Inch screw threads. Fine pitch
SIS SMS 573-1971 Short screwing taps. Inch screw threads. Coarse pitch
SIS SMS-302-1931
SIS SMS 491-1973 Taper pins with threaded end. ISO inch screw threads. Coarse pitch
SIS SMS 87-1973 Taper pins with threaded end. ISO metric screw threads. Coarse pitch
SIS SMS 1375-1967 Screw lengths, thread lengths. Metric screw threads
SIS SS 1717-1988 ISO inch screw threads — Selected sizes for screw threads with fine pitch
SIS SMS 2-1972 ISO metric screw threads. Selected sizes for screw threads with coarse pitch
SIS SS 1716-1988 ISO inch screw threads — Selected sizes for screw threads with coarse pitch
SIS SS 1711-1978 UNC-threads, dimensioned for coating — Thread tolerances
SIS SS 1712-1978 UNF-threads, dimensioned for coating - Thread tolerances
SIS SS 2639-1987 Screwing dies - Taper pipe threads R
SIS SMS 1459-1969 Studs. Nominal lengths. Thread lengths. Metric screw threads. Coarse pitch
SIS SS 3218-1984 Threaded stainless steel pipe fittings - Barrel nipples with external taper pipe threads
SIS SMS 2170-1966 Metric screw threads. Tolerances. Deviations for constructional threads
SIS SMS 273-1929
SIS SS-ISO 4570/3:1981 Tyre valve threads - Part 3: Threads 8V2, 10V1, 11V1, 13V2, 15V1, 16V1, 17V1, 17V2, 17V3, 19V1, 20V1
SIS SMS 1719-1958
SIS SMS 2170-1973 Metric screw threads. Tolerances. Deviations for constructional threads.
SIS SMS 272-1929
SIS SMS 2348-1966 Screw threads and threads undercut for shank hooks
SIS SS-ISO 4570/2:1981 Tyre valve threads - Part 2: Threads 9V1, 10V2, 12V1, 13V1
SIS SMS 1373-1963
SIS SS-ISO 1478:1986 Tapping screws thread
SIS SS 3194-1988 ISO inch screw threads- Hot dip galvanizing of external screw threads (UNC threads) - Tolerances and limits of sizes
SIS SMS-305-1931
SIS SS-ISO 5969:1987 Ground thread taps for pipe threads G and Rp - Tolerances on the threaded portion
SIS SS 1108-1991 Fittings for piping — Straight nipples forPN 10 — Externally threaded
SIS SS 1747-1979 Screw calliper gauges — Profiles and tolerances for ISO inch screw threads
SIS SMS 1968-1969 Run outs and undercuts for externat screw threads unijied screw series
SIS SMS 2171-1973 Metric screw threads. Tolerances. Limits of sizes for commercial bolt and nut threads. Medium quality
SIS SS 1925-1988 ISO inch screw threads with coarse pitch - Screw thread tolerances for metal end of studs
SIS SMS 36-1972 Parallel pipe threads
SIS SMS 295-1972 Taper pipe threads

British Standards Institution (BSI), astm thread

BS EN ISO 6410-2:1996 Technical drawings. Screw threads and threaded parts. Screw thread inserts
BS 919-2:2007 Screw gauge limits and tolerances – Part 2: Specification for gauges for screw threads of Whitworth and B.A. forms
2A 231-1993 Rolled threads for bolts. Lead and runout requirements
BS 811:1950 Specification for cycle (B.S.C.) threads (formerly known as C. E.I. threads)
BS 84:2007 Parallel screw threads of Whitworth form – Requirements
BS ISO 68-1:1998+A1:2020 ISO general purpose screw threads. Basic profile. Metric screw threads
BS ISO 68-2:1998+A1:2020 ISO general purpose screw threads. Basic profile. Inch screw threads
BS EN 10226-2:2005(2016) Pipe threads where pressure tight joints are made on the threads - Taper external threads and taper internal threads - Dimensions, tolerances and designation
BS EN ISO 1478:2000 Tapping screw thread

RO-ASRO, astm thread

STAS 9025-1981 THREADED FITMENTS Thread engagement
STAS 1112/15-1990 Screw cutting tools. Taps for pipe threads. Thread tolerances
STAS 1112/18-1989 Taps TAPS. FOR BRIGGS CONICAL THREADS Thread tolerances
STAS 3508/2-1970 SCREW THREAD RUNOUT AND UNDERCUT Pipe thread
STAS 3508/5-1980 THREAD RUN-OUT AND UNDERCUT ISO trapezoidal screw thread and buttress thread
STAS 2298-1983 Serew cutting tools STRAIGHT COMBS FOR ISO METRIC THREAD AND GAZ THREAD WITH THREAD PACKING
STAS 8957-1971 CIRCULAR SCREWING DIES FOR GAS PIPE THREAD WITH THREAD TIGHTENING Dimensions
STAS 1112/3-1980 TAPS FOR METRIC THREADS Tolerances of screw thread
STAS 2114/5-1975 iso trapezoidal screw threads Limits of size for internal seiew thread
STAS 3872-1983 SCREW THREADS Terminology
STAS 3508/1-1980 THREAD RUN.-OUT AND UNDERCUT ISO general purpose metric screw thread
STAS 3508/3-1970 SGREW THREAD RUNOUT AND UNDERCUT Metric taper thread
STAS 1450/3-1989 Threaded fasteners. Threaded screws, studs and pins. Nomenclature
STAS 7528-1966
STAS 1112/11-1990 Screw cutting tools. Taps for pipe threads. Dimensions
STAS 2114/6-1975 ISO TRAREZOIDAL SCREW THREADS Limits of size for external scrcw thiread
STAS 3508/4-1970 SCREW THREAD RUNOUT AND UNDERCUT Briggs taper thread

Taiwan Provincial Standard of the People's Republic of China, astm thread

CNS 511-1978 Metric Trapezoidal Screw Thread (Profiles)
CNS 4225-1978 Stub Metric Trapezoidal Screw Threads-Profiles
CNS 4227-1978 Thread and Thread Ends for Wood Screws
CNS 6881-1981 Machine Taps for Coarse ISO Metric Threads
CNS 508-1978 Knuckle Thread (Profiles, Nominal Sizes)
CNS 515-1978 Metric Buttress Screw Threads (Profiles)
CNS 4429-1992 Hexagon Nuts, Rounded Trapezoidal Thread
CNS 4610-1983 Threaded Rods
CNS 5193-1980 Threaded Pins
CNS 5000-1984 Ground Thread Taps for ISO Metric Threads of Tolerances 4H to 8H and 4G to Coarse and Fine Pitches-Manufacturing Tolerances on the Threaded Portion
CNS 8777-1982 Taper Pins with Thread and Constant Threaded Part

Defense Logistics Agency, astm thread

DLA MS35914 REV G-2012 INSERT, SCREW THREAD - THREAD CUTTING
DLA AN531 REV 5 NOTICE 1-1997 SCREW, TAPPING, THREAD FORMING OR THREAD CUTTING, 82 DEG., FLAT HEAD, SPACED THREAD
DLA AN531 REV 5 (1)-1996 SCREW, TAPPING, THREAD FORMING OR THREAD CUTTING, 82 DEG., FLAT HEAD, SPACED THREAD
DLA AN531 REV 5-1959 SCREW, TAPPING, THREAD FORMING OR THREAD CUTTING, 82 DEG., FLAT HEAD, SPACED THREAD
DLA MIL-DTL-13791/10-2009 INSERT, SCREW THREAD

BE-NBN, astm thread

Japanese Industrial Standards Committee (JISC), astm thread

JIS B 1006:1985 Thread run-outs and thread undercuts for external threaded fasteners
JIS B 0002-2:1998 Technical drawings -- Screw threads and threaded parts -- Part 2: Screw thread inserts
JIS B 1197:1982 Threaded studs
JIS B 1006:2009 Fasteners -- Thread run-outs for external thread in accordance with ISO general purpose metric screw threads
JIS B 0201:1973 Miniature screw threads
JIS B 0203:1982 Taper pipe threads
JIS B 0225:1960 Cycle threads
JIS B 0203:1999 Taper pipe threads
JIS B 1007:2003 Tapping screws thread
JIS B 1007:2015 Tapping screws thread

Korean Agency for Technology and Standards (KATS), astm thread

KS B 0245-1987(2022) Thread Run-Outs and Thread Undercuts for External Threaded Fasteners
KS B 3275-2002(2012) CIRCULAR SCREWING DIES FOR TAPER PIPE THREADS
KS B 3275-1987 CIRCULAR SCREWING DIES FOR TAPER PIPE THREADS
KS B 3274-2002(2012) CIRCULAR SCREWING DIES FOR PARALLEL PIPE THREADS
KS B 3274-1987 CIRCULAR SCREWING DIES FOR PARALLEL PIPE THREADS
KS B ISO 6410-2-2014(2019) Technical drawings — Screw threads and threaded parts — Part 2: Screw thread inserts
KS B ISO 15480-2001(2011) Hexagon washer head drilling screws with tapping screw thread
KS B 5223-2001(2016) Screw thread limit gauges for parallel pipe threads
KS B 5223-1985 Screw thread limit gauges for parallel pipe threads
KS B 1065-1999 Bolts, screws and studs-Nominal lengths, andthread lengths for general purpose bolts
KS B ISO 6410-3-2014(2019) Technical drawings — Screw threads and threaded parts — Part 3: Simplified representation
KS B 5223-2001(2021) Screw thread limit gauges for parallel pipe threads
KS B ISO 15483-2001(2011) Cross recessed raised countersunk head drilling screws with tapping screw thread
KS B 0223-1986(2011) Screw Threads for Rigid Metal Conduits and Fittings
KS B 1020-1998 Ball screws
KS B 0228-2013 Miniature Screw Threads

YU-JUS, astm thread

JUS K.T3.170-1985 Slats in the threaded part of the threaded gauging members
JUS M.B1.035-1979 ISO exterml metric trapezoidal screw threads, knuckle screw threads and other screw threads ofcoarse pitches. Runouts and undercuts
JUS M.B1.036-1979 SO internat trapezoidal screw threads, knuckle screw treads and other screw threa?s of coarse pitches. Runouts and undercuts
JUS M.B0.510-1981 Metric screw thread with trianguiar ISO—profile. Gauges for extemal threads. Tolerances for thread gauges
JUS M.B0.514-1981 ISO Metric trapezoidal screw threads. Gauges for external and internat screw threads. Tolerances far thread gauges
JUS M.B0.511-1981 Metne screw thread with tnangular li>U-protile. bauges tor internat tnreaas. loierances ror znreaa gauges

Professional Standard - Aviation, astm thread

HB 1922-1975 Tapered thread medium diameter thread plug gauge
HB 1926-1975 Taper thread middle diameter thread ring gauge
HB 7417-1996 MJ thread short thread small hexagon head bolts
HB 7417～7420-1996 MJ thread short thread small hex head bolts
HB 7418-1996 MJ thread short thread small hexagon head bolts
HB 7418-2013 A286MJ thread short thread small hex head bolts
HB 7419-1996 MJ thread short thread small hexagon head bolts
HB 7420-1996 MJ thread short thread small hexagon head bolts
HB 1924-1975 Tapered thread root high thread plug gauge
HB 1928-1975 Tapered thread root high thread ring gauge
HB 4-80-1976 Tapered thread plug
HB 4265-2004 Internal screw gauge for wire thread insert
HB 4265-1989 Thread plug gauges for internal threads for mounting wire thread inserts
HB 247-1972 Taper thread
HB 4007-1987 Taper thread pith diameter screw thread ring gauge exclusively used for gas cylinders
HB 4006-1987 Taper thread pith diameter screw thread plug gauge exclusively used for gas cylinders
HB 246-1975 Screw thread finishing (washout thread, thread margin, undercut, chamfer, ring groove)
HB 7415-1996 MJ thread polished rod tolerance with f9 short thread hexagon head bolts
HB 7416-1996 MJ thread polished rod tolerance with r6 short thread hexagon head bolts
HB 8317-2013 A286 polished rod tolerance band f9MJ thread short thread hexagon head bolt
HB 1930-1975 Calibration plug gauge for taper thread pitch diameter thread ring gauge
HB 7422-1996 MJ thread polished rod tolerance zone h8 short thread small hexagon head bolts
HB 7424-1996 MJ thread polished rod tolerance zone h8 short thread small hexagon head bolts
HB 7421-1996 MJ thread polished rod tolerance band f9 short thread small hexagon head bolts
HB 7422～7424-1996 MJ thread polished rod tolerance band h8 short thread small hexagon head bolts
HB 7423-1996 MJ thread polished rod tolerance zone h8 short thread small hexagon head bolts
HB 241-1975 Common screw thread
HB 242-1970 Clearance screw thread
HB 8287～8290-2002 Threaded bush

(U.S.) Ford Automotive Standards, astm thread

FORD WA972-1996 THREAD DIMENSIONS FOR LOCKING THREADS - ROOT INTERFERENCE TYPE
FORD WE510-1996 "U" NUT WIDE PANEL RANGE THREAD CLASS 6H
FORD W-GT1-1999 THREAD PLUG GAUGE

IT-UNI, astm thread

UNI 4649-1961
UNI 4648-1961
UNI 7456-1975
UNI 7286-1974
UNI 4651-1961
UNI 5534-1964
UNI 699-1938
UNI 6986-1971 Measuring instruments. Not go screw plug gauges, check plugs for new solid go and not go screw ring gauges and wear check plugs for solid and adjustable go and not go screw ring gauges for ISO metric threads with nominal diameter above 50 to 100 mm.
UNI 2709-1945
UNI ISO 5408:2021 Screw threads -- Vocabulary

FI-SFS, astm thread

SFS 2197-1967
SFS 2013-1966
SFS 5419-1987
SFS B.1.18-1933 Puolisuunnikaskierteet
SFS 4427-1979 KIERRELIITIN
SFS B.1.19-1933 Puolisuunnikaskierteet

Danish Standards Foundation, astm thread

DS/ISO 6410-2:1995 Technical drawings - Screw threads and threaded parts - Part 2: Screw thread inserts
DS/EN ISO 6410-2:1996 Technical drawings - Screw threads and threaded parts - Part 2: Screw threads inserts
DS/ISO 1478:1985 Tapping screws threads
DS/EN ISO 1478:1994 Tapping screws thread
DS 44:1967 Internal thread runout and undercut. ISO metric thread
DS/EN ISO 1478:2000 Tapping screw thread
DS/ISO 5408:2009 Screw threads - Vocabulary

NO-SN, astm thread

NS 1095-1963 UNC-threads for the metal end of studs - Tolerances on the threads
NS 5321-1977 Hand taps for pipe threads for taper threads

HU-MSZT, astm thread

Professional Standard - Machinery, astm thread

JB/T 8824.2-1998 Manufacturing tolerances on the threaded portion for unified threads taps
JB/T 8825.2-1998 Manufacturing tolerances on the threaded portion for whitworth threads taps
JB/T 10031-1999 Gauges for pipe threads where pressure-tight joints are made on the threads
JB/T 9995-1999 Taper tap for 55°straight pipe threads. Thread tolerance
JB/T 9989.2-1999 Tap for trapezoidal threads Part 2: Thread tolerance
JB/T 7981-1999 Screw thread template
JB/T 7981-2010 Screw template

RU-GOST R, astm thread

GOST 7250-1960 Taps for inch threads. Thread tolerances
GOST 19831-1974 Taps dies trapezoidal thread. Tolerances on thread
GOST 11188-1982 Taps for metric interference thread. Tolerances for threads
GOST 17587-1972 Circular screwing dies for metric screw thread. Tolerances on thread
GOST 21973-1976 Threaded piping joints. Joining threads. Series
GOST R ISO 1478-1993 Tapping screws thread
GOST 10549-1980 Screw thread runout. Washout threads, total thread runouts, undercuts and chamfers

ZA-SANS, astm thread

SANS 1700-2-13:2003 Fasteners Part 2: Screw threads Section 13: Tapping screws thread

Military Standard of the People's Republic of China-General Armament Department, astm thread

GJB 3.2-1982 MJ threaded bolt and nut thread dimensions and tolerances
GJB 3374-1998 Bolts with MJ thread
GJB 3373-1998 MJ threaded screws
GJB 3372-1998 Ordinary threaded screws
GJB 3371-1998 Ordinary threaded bolts
GJB 3.2A-2015 MJ Threads Part 2: Limiting Dimensions of Bolt and Nut Threads
GJB 3.3-1985 Dimensions and tolerances of MJ threaded pipe fittings threads
GJB 3.4-1985 Dimensions and tolerances of threads of MJ threaded structural parts

PK-PSQCA, astm thread

PS 132-1960 SCREW THREADS

SAE - SAE International, astm thread

SAE J475A-1964 Screw Threads
SAE AS4861-1995 Bushing@ Pipe@ Internal and External Thread (FSC 4730; Should Be Used Instead of AN912 REV 9@ Which Was Cancelled on 8 February 1999)
SAE AS4861A-2003 FITTING, BUSHING, PIPE, INTERNAL AND EXTERNAL THREAD
SAE MA3288A-2018 NUT@ PLAIN HEX – UNS S66286@ MJ THREAD@ METRIC
SAE AS4854A-2003 FITTING, ELBOW, 90°, PIPE, INTERNAL AND EXTERNAL THREAD
SAE ARP368A-1959 SPARK PLUG THREAD FORM DATA (60 DEGREES THREAD ANGLE)
SAE ARP368B-1960 SPARK PLUG THREAD FORM DATA (60 DEGREES THREAD ANGLE)

NL-NEN, astm thread

NEN-ISO 6410-2:1994 Technical drawings.Screw threads and threaded parts.Part 2:Screw thread inserts

Society of Automotive Engineers (SAE), astm thread

SAE RS-428-5-1955 RS428 Tapped Holes for Wire Thread Inserts, (B.A. B.S.F. B.S.W. Threads) – Unplated
SAE RS-429-4-1955 RS429 Tapped Holes for Wire Thread Inserts, (BSPF. Threads)-Unplated
SAE AS4861-2002 BUSHING, PIPE, INTERNAL AND EXTERNAL THREAD
SAE RS-430-5-1969 RS430 Tapped Holes for Wire Thread Inserts, (Unified Threads)-Unplated
SAE ARP368C-1972 Spark Plug Thread Form Data (60 Degrees Thread Angle)
SAE AS1370-1976 Screw Threads, Controllroot Radius (J Threads) - Metric Series
SAE AS1171A-2012 BOSS-FLUID CONNECTION, INTERNAL STRAIGHT THREAD, SHALLOW TAP
SAE AS1171-1970 BOSS-FLUID CONNECTION, INTERNAL STRAIGHT THREAD, SHALLOW TAP
SAE AS1171B-2022 BOSS-FLUID CONNECTION, INTERNAL STRAIGHT THREAD, SHALLOW TAP
SAE J81-1997 Thread Rolling Screws
SAE AMS7473F-1991 Bolts and Screws Roll Threaded
SAE ARP368C-1992 SPARK PLUG THREAD FORM DATA (60° THREAD ANGLE)
SAE AS4861A-2013 FITTING, BUSHING, PIPE, INTERNAL AND EXTERNAL THREAD
SAE AS4861B-2016 FITTING, BUSHING, PIPE, INTERNAL AND EXTERNAL THREAD
SAE AS7473-1991 BOLTS AND SCREWS Roll Threaded
SAE AMS7473B-1960 BOLTS AND SCREWS, ROLL THREADED
SAE AMS7473D-1979 BOLTS AND SCREWS Roll Threaded
SAE AS3062C-1979 Bolts, Screws and Studs, Screw Thread Requirements
SAE AS3062C-1988 Bolts, Screws and Studs - Screw Thread Requirements
SAE AS3062C-2018 Bolts, Screws and Studs, Screw Thread Requirements
SAE AS3062A-1974 BOLTS, SCREWS AND STUDS, SCREW THREAD REQUIREMENTS
SAE AS3062B-1977 BOLTS, SCREWS AND STUDS, SCREW THREAD REQUIREMENTS
SAE AS3062-1970 BOLTS, SCREWS AND STUDS, SCREW THREAD REQUIREMENTS
SAE MA3288-1985 NUT, PLAIN HEX - UNS S66286, MJ THREAD, METRIC
SAE MA3288-2012 NUT, PLAIN HEX – UNS S66286, MJ THREAD, METRIC
SAE AS896-1976 NIPPLE, FLARELESS TUBE TO MALE PIPE
SAE AS4854A-2013 FITTING, ELBOW, 90°, PIPE, INTERNAL AND EXTERNAL THREAD
SAE AS4855A-2013 FITTING, ELBOW, 45°, PIPE, INTERNAL AND EXTERNAL THREAD

KP-CSK, astm thread

KPS 102-2-2002 Technical drawings-Screw threads and threaded parts-Part 2:Screw thread inserts

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, astm thread

GB/T 42851-2023 1517MPaMJ threaded bolts
GB/T 42850-2023 1275MPaMJ threaded bolts
GB/T 10922-1989 Gauges for pipe threads where pressure-tight joints are not made on the threads
GB/T 7306.1-2000 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 1:Parallel internal and taper external threads
GB/T 7306.2-2000 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 2:Taper internal and external threads
GB/T 5280-2002 Tapping screws thread
GB/T 14791-1993 The terms of screw threads

AR-IRAM, astm thread

International Organization for Standardization (ISO), astm thread

ISO 15480:2019 Hexagon washer head drilling screws with tapping screw thread
ISO 1478:1983 Tapping screws thread
ISO 1478:1999 Tapping screws thread
ISO 4570-2:1979 Tyre valve threads; Part 2 : Threads 9V1, 10V2, 12V1, 13V1
ISO 4570-3:1980 Tyre valve threads; Part 3 : Threads 8V2, 10V1, 11V1, 13V2, 15V1, 16V1, 17V1, 17V2, 17V3, 19V1, 20V1
ISO 5408:2009 Screw threads - Vocabulary
ISO/R 1501:1970 ISO miniature screw threads

VN-TCVN, astm thread

TCVN 5907-1995 Screw threads and threaded parts.General conventions

European Committee for Standardization (CEN), astm thread

EN 16292:2013 Glass packaging - Screw finishes - Depressed threads
EN ISO 1478:1994 Tapping Screws Thread ISO 1478: 1983
EN ISO 1478:1999 Tapping Screws Thread ISO 1478: 1999

TH-TISI, astm thread

TIS 2406.2-2008 Technical drawings.screw threads and threaded parts.part 2: screw thread inserts
TIS 2556-2011 Rubber threads

American National Standards Institute （ANSI), astm thread

ANSI/ASME B18.6.5M-1999 Metric Thread Forming and Thread Cutting Tapping Screws
ANSI/ASME B1.12-1987 Class 5 Interference - Fit Thread
ANSI/ASME B1.5-1997 Acme Screw Threads
ANSI/ASME B1.1-2003 Unified Inch Screw Threads (UN and UNR Thread Form)

Professional Standard - Aerospace, astm thread

QJ 2090-1991 MJ threaded fasteners 1100MPa/235°C pan head short threaded bolts
QJ 2085-1991 MJ threaded fasteners 1100MPa/235°C countersunk head short thread bolts
QJ 1977-1990 MJ threaded fasteners 1100MPa/235℃ hexagon head short thread bolts
QJ 1319.1-1987 Ordinary thread gauge thread ring gauge (d=1~100mm)
QJ 2760.2-1995 MJ Thread Ring Gauge Double Handle MJ Thread Ring Gauge
QJ 2760.1-1995 MJ Thread Ring Gauge Shankless MJ Thread Ring Gauge
QJ 2759.1-1995 MJ Thread Plug Gauge Integral MJ Thread Plug Gauge
QJ 2091-1991 MJ threaded fasteners 1100MPa/235°C pan head close tolerance short thread bolts
QJ 2086-1991 MJ threaded fasteners 1100MPa/235℃ countersunk head tight tolerance short thread bolts

AIA/NAS - Aerospace Industries Association of America Inc., astm thread

NAS258-1947 Elbow - 90 Degree@ Female Screw Thread Plastic Tee-Female Screw Thread Cross- Female Screw Thread (Rev 2)
NAM51417-1999 Bolt@ Machine@ Hex Head@ Fully Threaded@ Fine Thread@ Metric
NAS9603-9624-1996 Bolt@ Hexagon Head@ A286 CRES Close Tolerance@ Minimum Major@ Long Threads

BR-ABNT, astm thread

ABNT P-NB-183-1970
ABNT NBR 14516-2017 Thread tapping machine with threaded rod - Pg 7 to Pg 48 threads for rigid conduit connections - Requirements

TR-TSE, astm thread

TS 1026-1971 NUTS WITH METRIC THREAD

IFI/FASTNR - Industrial Fastener Institute, astm thread

PROJEC- Projection Weld Studs (Threaded)
SECT A- Section A - Screw Threads

KR-KS, astm thread

KS B 0248-2008(2023) Tapping screws threads
KS B ISO 15481-2016 Cross recessed pan head drilling screws with tapping screw thread

United States Navy, astm thread

NAVY MS90399-1967 SCREW, DRIVE
NAVY AN504 REV 6 REINST-1982 SCREW, TAPPING, THREAD CUTTING, ROUND HEAD, MACHINE SCREW THREAD

Professional Standard - Automobile, astm thread

QC/T 336-1999 Threaded connecting fork

GOSTR, astm thread

GOST R 59110-2020 Motor vehicles. Fasteners. Thread run-outs and thread undercuts for ISO metric threads

Lithuanian Standards Office , astm thread

LST EN ISO 6410-2:2001 Technical drawings - Screw threads and threaded parts - Part 2: Screw thread inserts (ISO 6410-2:1993)

Aerospace Industries Association, astm thread

AIA NAS 258-1947 (Inactive)Elbow - 90 Degree, Female Screw Thread Plastic Tee-Female Screw Thread Cross- Female Screw Thread (Rev. 2)

ES-AENOR, astm thread

UNE 16-605-1991

AENOR, astm thread

UNE-EN ISO 6410-2:1996 TECHNICAL DRAWINGS. SCRES THREADS AND THREADED PARTS. PART 2: SCREW THREAD INSERTS. (ISO 6410-2:1993).
UNE 17077:1980 SCREWS, BOLTS AND STUDS. THREAD RUN OUT.
UNE 17001:1963 SCREWS THREADS. DEFINITIONS.

PL-PKN, astm thread

PN M82063-1989 Fasteners Thread run-outs and undercuts tnetric thread
PN O79082-1972 Packages Screw threades

IN-BIS, astm thread

国家市场监督管理总局、中国国家标准化管理委员会, astm thread

GB/T 39641-2020 Methods for gaging fastening screw threads by thread indicating gages

Aerospace Industries Association/ANSI Aerospace Standards, astm thread

AIA/NAS NASM33537-2009 INSERT, SCREW THREAD, HELICAL COIL, INCH SERIES, COARSE AND FINE THREAD, STANDARD ASSEMBLY DIMENSIONS FOR Rev 1

Indonesia Standards, astm thread

SNI 07-3007-1992 Cast phosphoric bronze

U.S. Air Force, astm thread

AIR FORCE AN926 REV 6-1954 TEE - INTERNAL SCREW THREAD [Use: DLA AN938 REV 6 CANC NOTICE 3, DLA AN938 REV 6 CANC NOTICE 2, DLA AN938 REV 6 VALID NOTICE 1, DLA AN938 REV 6, DLA AN938 REV 4]

Professional Standard - Electron, astm thread

SJ 2495-1984 Tapping screws thread
SJ 2818-1987 Tapping screws thread

GM North America, astm thread

GM X100-1998 Metric Screw Threads Revision A

Professional Standard - Tobacco, astm thread

YC/T 230-2007 Pipe threads with 80 degree