ZH
RU
ES
high and low temperature
high and low temperature, Total:116 items.
In the international standard classification, high and low temperature involves: Fibre optic communications, Components for electrical equipment, Environmental testing, TESTING, Photography, Mechanical testing, Electricity. Magnetism. Electrical and magnetic measurements, Road vehicle systems, Energy and heat transfer engineering in general, Road vehicles in general, Wind turbine systems and other alternative sources of energy, Electrical accessories, Electrical and electronic testing, Rails and railway components, Railway rolling stock, Railway engineering in general, Lamps and related equipment, Reinforced plastics, Electromechanical components for electronic and telecommunications equipment, Geology. Meteorology. Hydrology, Vocabularies, Welding, brazing and soldering, Internal combustion engines for road vehicles, Thermodynamics and temperature measurements, Fasteners, Printed circuits and boards, Rubber and plastics products, Optics and optical measurements, Conducting materials, Iron and steel products, Pipeline components and pipelines, Installations in buildings, Optical equipment, Footwear, Rubber, Farming and forestry, Earth-moving machinery, Test conditions and procedures in general.
Professional Standard - Petrochemical Industry, high and low temperature
Military Standard of the People's Republic of China-General Armament Department, high and low temperature
- GJB 234-1987 No. 7058 high and low temperature grease
- GJB 573.7-1988 Fuze environment and performance test methods High and low temperature storage test
- GJB 796.6-1990 High and low temperature test procedures for design and finalization of military fixed bridge beam equipment
American National Standards Institute （ANSI), high and low temperature
Group Standards of the People's Republic of China, high and low temperature
- T/ZZB 0635-2018 High-temperature and low-temperature resistant permanent magnet ferrite
- T/CASME 372-2023 High and low temperature constant temperature circulation integrated device
- T/CASME 787-2023 High and low temperature environment simulation device for automotive engine testing
- T/WHQASA 1-2021 Test method for high and low temperature matching dimensions of automobile composite outer cover
- T/CSTM 00989-2023 Test method for microwave parameters under high temperature, low temperature, temperature cycling and humidity
- T/NHXY 4-2021 Polymer low temperature TPU hotmelt adhesive Gangbao
- T/CFA 010202.1-2017 Low temperature alloy cast steel with high toughness
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, high and low temperature
- GB/T 10592-2008 Specifications for low/high temperature test chambers
- GB/T 10592-1989 Specification for low/high temperature test chambers
- GB/T 10592-2023 High and low temperature test chamber technical conditions
- GB/T 10590-2006 Specifications for high and low temperature/low air pressure testing chambers
- GB/T 10590-2006(英文版) Specifications for high and low temperature/low air pressure testing chambers
- GB/T 9979-1988 Guide rule of test for mechanical properties of fiber-reinforced plastics at elevated and reducde temperatures
- GB/T 9979-2005 Guide rule of test for mechanical properties of fiber-reinforced plastics at elevated and reduced temperatures
- GB/T 2424.1-2005 Environmental testing for electric and electronic products Guidance for high temperature and low temperature tests
- GB/T 5170.10-2017 Inspection methods for environmental testing equipments.Part 10:Combined high and low temperature/low air pressure testing equipments
- GB/T 5170.10-2008 Inspection methods for environmental testing equipments for electric and electronic products.Combined high and low temperature/low air pressure testing equipments
- GB/T 2424.1-1989 Basic environmental testing procedures for electric and electronic products--Guidance for high temperature and low temperature tests
- GB/T 24452-2009 Plastics piping systems for soil and waste discharge(low and high temperature)inside buildings.Chlorinated poly(vinyl chloride)(PVC-C)
- GB/T 12085.10-1989 Optics and optical instruments--Environmental test methods--Combined sinusoidal vibration,dry heat,cold
- GB/T 5170.10-1996 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products. Combined high and low temperature/low air pressure testing equipment
- GB/T 2424.24-1995 Basic environmental testing procedures for electric and electronic products. Guidance for combined temperature (cold and heat)/low air pressure/vibration(sinusoidal)test
- GB/T 12085.13-1989 Optics and optical instruments--Environmental test methods--Shock,bump or freefall,dry heat,cold
- GB/T 12085.16-1995 Optics and optical instruments--Environmental test methods--Combined bounce or steady state acceleration, in dry heat or cold
- GB/T 10591-2006(英文版) Specifications for high temperature/low air pressure testing chambers
- GB/T 12085.10-2010 Optics and optical instruments.Environmental test methods.Part 10:Combined sinusoidal vibration and dry heat or cold
- GB/T 2423.102-2008 Environmental testing for electric and electronic products.Part 2:Test method.Test:combined temperature(cold and heat)/low air pressure/vibration(sinusoidal)
- GB/T 12085.15-1995 Optics and optical instruments--Environmental test methods--Combined random vibration wideband--Reproducibility medium, in dry heat or cold
- GB/T 10591-2006 Specifications for high temperature/low air pressure testing chambers
- GB/T 10591-1989 Specification for high temperature/low air pressure test chambers
- GB/T 2423.59-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Test Z/ABMFh:Combined temperature(cold and heat)/low air pressure/vibration(random)
- GB/T 12085.16-2010 Optics and optical instruments.Environmental test methods.Part 16:Combined bounce or steady-state acceleration and dry heat or cold
- GB/T 7759-1996 Rubber, Vulcanized or thermoplastic--Determination of compression set at ambient elevated or low temperatures
Professional Standard - Machinery, high and low temperature
- JB/T 8250.5-1999 High-temperature and low-temperature test method for cameras
- JB/T 6865-1993 Pendulum type high and low temperature impact testing machine technical conditions
- JB/T 8406-2008 Construction machinery. High temperature and low pressure oil-carry pipes
- JB/T 8406-2001 Construction machinery.High temperature and low pressure oil-carrying pipe
未注明发布机构, high and low temperature
工业和信息化部/国家能源局, high and low temperature
- JB/T 13229-2017 High and low temperature environmental chamber for testing machine
- JB/T 8406-2017 Engineering machinery high temperature and low pressure oil hose
Professional Standard - Electron, high and low temperature
- SJ/T 10212-1991 Testing equipment,high and low temperature/low air pressure Y60600-G
- SJ 2326-1983 Generic specification for high and low temperature low pressure test chambers
- SJ/T 31388-1994 Requirements of readiness and methods of inspection and assessment for high/low temperature moisture-heat test chambers
- SJ/T 31129-1994 Requirements of readiness and methods of inspection and assessment for high/low temperature test equipment
Indonesia Standards, high and low temperature
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, high and low temperature
- GB/T 33861-2017 Testing method of energy efficiency for temperature test chambers
Korean Agency for Technology and Standards (KATS), high and low temperature
Liaoning Provincial Standard of the People's Republic of China, high and low temperature
- DB21/T 2761-2017 High and low temperature test specification for wind power gearbox
Taiwan Provincial Standard of the People's Republic of China, high and low temperature
- CNS 6154-1988 Method of Test for Electromechanical Switches(High/Low Temperature Operation)
- CNS 5434-1989 Method of Test for High and Low Temperature for Automobile Parts
- CNS 4575-1978 Finishes and Tolerance of Bolts, Screws and Nuts Primarily of Steels Exhibiting Toughness at Subzero Temperature and High Temperature Steels
- CNS 7149-1994 Steel Castings for Low Temperature and High Pressure Service
Japanese Industrial Standards Committee (JISC), high and low temperature
- JIS D 0204:1967 Method of high and low temperature test for automobile parts
- JIS E 3019:2018 High and low temperature testing methods for parts of railway signalling
- JIS E 3019:1979 High and low temperature testing methods for parts of railway signaling
- JIS E 4035:1995 Railway rolling stock.High and low temperature test methods of parts
- JIS E 4035 AMD 1:2011 Railway rolling stock.High and low temperature test methods of parts (Amendment 1)
- JIS K 6262:2006 Rubber, vulcanized or thermoplastic -- Determination of compression set at ambient, elevated or low temperatures
GM Daewoo, high and low temperature
KR-KS, high and low temperature
Guangdong Provincial Standard of the People's Republic of China, high and low temperature
- DB44/T 1894-2016 Test method for high and low temperature weather resistance of LED street lamps and tunnel lamps
工业和信息化部, high and low temperature
- JB/T 13702.1-2019 Camera Environmental Testing Part 1: High and Low Temperature Tests
RO-ASRO, high and low temperature
- STAS 5118/14-1975 Packages DETERMINATION OF THE INFLUENCE OF HIGH AND LOW TEMPERATURES UPON PHYSICAL AND, MECHANICAL STRENGTHS
- STAS SR ISO 815+A1:1995 Rubber, vulcanized or thermoplastic - Determination of compression set at ambient, elevated or low temperatures
国家市场监督管理总局、中国国家标准化管理委员会, high and low temperature
- GB/T 41036-2021 General specification for super high-low temperature circular electrical connector for space applications
- GB/T 2423.63-2019 Environmental testing—Part 2:Test methods—Test: combined temperature(cold and heat)/low air pressure/vibration（mixed mode）
Inner Mongolia Provincial Standard of the People's Republic of China, high and low temperature
- DB15/T 933-2015 Extreme high temperature, low temperature and rainfall standards in Inner Mongolia
- DB1501/T 0044-2023 Facility strawberry high-temperature heat damage, low-temperature freezing damage, and low-light disaster levels
RU-GOST R, high and low temperature
- GOST 29297-1992 Welding, brazing soldering and braze welding of metals. Nomenclature and reference numbers of processes
Professional Standard - Ocean, high and low temperature
- HY 21.1-1992 The basic method of environmental test for oceanographic instruments - Guideline for high and low temperature test
- HY 21.2-1992 The basic method of environmental test for oceanographic instruments - Guideline for high and low temperature storage test
Standard Association of Australia （SAA）, high and low temperature
- AS 2528:1982 Bolts, studbolts and nuts for flanges and other high and low temperature applications
Professional Standard - Aviation Industry, high and low temperature
- Q/HBm 109-1994 High temperature and low temperature test methods for auto parts
Professional Standard - Aviation, high and low temperature
- HBm 60-1987 High-temperature and low-temperature test methods for instrumentation of miniature automobiles
American Society of Mechanical Engineers (ASME), high and low temperature
- ASME SEC VIII D1 C PT ULT-2003 Part ULT Alternative Rules for Pressure Vessels Constructed of Materials Having Higher Allowable Stresses at Low Temperature
Society of Automotive Engineers (SAE), high and low temperature
- SAE AMS3337-1960 SILICONE RUBBER High and Extreme Low Temperature Resistant (65 - 75)
- SAE AMS3337A-1965 SILICONE RUBBER High and Extreme Low Temperature Resistant 65-75
- SAE ARP765-2002 Elastomer, Synthetic Compounds, High and Low Temperature, Fuel and Oil Resistant
Professional Standard - Ferrous Metallurgy, high and low temperature
SAE - SAE International, high and low temperature
冶金工业部, high and low temperature
- YB 4038-1991 Low temperature rough seam paste for blast furnace
Professional Standard - Railway, high and low temperature
- TB/T 2953-2015 High and low temperature testing methods for parts of railway signaling
- TB/T 2953-1999 High temperature and low temperature test methods for railway ground signal products
Electronic Components, Assemblies and Materials Association, high and low temperature
British Standards Institution (BSI), high and low temperature
- BS DD ENV 1519-2:2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Guidance for the assessment of conformity
- BS DD ENV 1451-2:2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Guidance for the assessment of conformity
Jiangxi Provincial Standard of the People's Republic of China, high and low temperature
- DB36/T 861-2023 Navel orange high temperature and low humidity disaster level
Association Francaise de Normalisation, high and low temperature
- NF T40-104:1976 Rubber. General directions for achieving elevated or subnormal temperatures for tests.
- NF A49-289:1990 Steel tubes. Butt welding tubular fittings used at low and high temperature. Non alloy, alloy and stainless steels. Dimensions. Technical delivery conditions.
- NF T46-011:1991 Rubber, vulcanized or thermoplastic. Determination of compression set at ambient, elevated or low temperatures.
- NF EN 10269:2013 Aciers et alliages de nickel pour éléments de fixation utilisés à température élevée et/ou basse température
(U.S.) Ford Automotive Standards, high and low temperature
European Committee for Standardization (CEN), high and low temperature
- PD CEN/TS 1566-2:2012 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Guidance for assessment of conformity
Sichuan Provincial Standard of the People's Republic of China, high and low temperature
- DB51/T 2830-2021 Meteorological Index Grades of Low Temperature, Rain, Snow and Freezing Disasters on the Western Sichuan Plateau
YU-JUS, high and low temperature
- JUS G.S0.052-1990 Rubber. General directions for achieving elevated or subnormal temperatures for test purposes
IN-BIS, high and low temperature