01.040.43 道路车辆工程 (词汇) 标准查询与下载

GB/T 17895-1999 天然气汽车和液化石油气汽车 词汇

本标准规定了天然气汽车和液化石油气汽车有关的词汇和定义。 本标准适用于可燃用天然气的汽车和可燃用液化石油气的汽车。

Natural gas vehicle and liquefied petroleum gas vehicle--Vocabulary

DB37/T 4717-2024 高速公路养护工程施工现场管理指南

Highway maintenance project construction site management guide

ASTM F3200-23 机器人、自动化和自主系统的标准术语

Standard Terminology for Robotics, Automation, and Autonomous Systems

ISO 19642-1:2023 道路车辆 汽车电缆 第 1 部分：词汇和设计指南

Road vehicles — Automotive cables — Part 1: Vocabulary and design guidelines

T/CIET 110-2023 绿色低碳产品 汽车铝合金车轮

本文件规定了铝合金车轮绿色低碳符合性的评价要求、评价方法及评价报告等内容。 本文件适用于汽车铝合金车轮的绿色低碳符合性评价。

Green and low-carbon products Aluminum alloy wheels for automobiles

ASTM F3200-22a 机器人、自动化和自主系统的标准术语

1.1 This terminology covers terms associated with robotic, automation, and autonomous systems. By providing a common and consistent lexicon, the purpose of this terminology is to facilitate communication between individuals who may be involved in the research, design, deployment, and use of robotic, automation, and autonomous systems, including but not limited to, for manufacturing, distribution, security, healthcare, response, etc. The terminology covers, but is not limited to, terms used in performance test methods of for example: robot arms, automatic guided vehicles (AGVs), autonomous mobile robots, and all other automatic or autonomous industrial systems. 1.2 For the terminology to be harmonious with the practices in the field, definitions have been drawn from the literature or other public sources when possible. When no definition is available, is similar but requires change for use within standards produced by Committee F45, or in dispute, a consensusbased approach will be used to resolve definitions and add them to the lexicon. The development of this terminology is taking place in close coordination with corresponding efforts in all Committee F45 subcommittees to ensure comprehensive and consistent coverage. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Terminology for Robotics, Automation, and Autonomous Systems

ISO 34501:2022 道路车辆.自动驾驶系统的试验方案.词汇

Road vehicles — Test scenarios for automated driving systems — Vocabulary

T/HGMIF 005-2022 绿色设计产品评价技术规范 铝合金轮毂

根据GB/T 32161《生态设计产品评价通则》及有关要求，铝合金轮毂的评价指标从产品全生命周期中对资源和能源的消耗、对生态环境和人体健康影响的角度进行选取，包括资源属性、能源属性、环境属性、产品属性指标，按照全生命周期的理念，在产品设计开发阶段系统考虑原材料选用、生产、销售、使用、回收、处理等各个环节对资源环境造成的影响，力求产品在全生命周期中最大限度降低资源消耗、尽可能少用或不用含有害物质的原材料，减少污染物产生和排放，从而实现环保的目的。评价指标设计主要考虑以现执行的国家标准、行业标准为判定依据，根据产品和行业特点，以评价筛选生态设计产品为目的，在测试及征询行业专家、生产厂商意见的基础上，科学、合理地确定指标基准值。

Technical specification for green-design product assessment Aluminium alloy wheel hub

GSO ISO 8090:2022 循环 术语

This document defines a description of common terms and symbols used in the field of bicycles and two wheeled Electric Power Assisted Cycles (EPACs). The terms are classified under a nomenclature of different parts of bicycles and two wheeled EPACs, and presented in several languages.

Cycles — Terminology

GSO EN 13878:2022 休闲住宿车辆 术语和定义

This document defines, in alphabetical order, terms relating to leisure accommodation vehicles (see 3.19) which are caravans (see 3.5), caravan holiday homes (see 3.6) and motor caravans (see 3.24). These terms are used in EN 721, EN 722-1, EN 1645-1, EN 1646-1, EN 1647, EN 1648-1 and EN 1648-2.

Leisure accommodation vehicles - Terms and definitions

QC/T 1161-2022 绿色设计产品评价技术规范 汽车

Green Design Product Evaluation Technical Specification Automotive

QC/T 1159-2022 汽车行业绿色供应链管理评价规范

Green supply chain management evaluation specifications for the automotive industry

QC/T 1158-2022 汽车产品单位产量综合水耗计算方法

Calculation method of comprehensive water consumption per unit output of automobile products

QC/T 1157-2022 汽车产品单位产量综合能耗计算方法

Calculation method of comprehensive energy consumption per unit output of automobile products

QC/T 1160-2022 汽车行业整车制造绿色工厂评价导则

Evaluation Guidelines for Green Factories in Vehicle Manufacturing in the Automotive Industry

ISO 24195:2022 道路车辆.起动装置工程用词汇和特性

This document includes common definitions for terms and their interdependencies related to starting devices as well as describes their general and specific characteristics.

Road vehicles — Vocabulary and characteristics for engineering of starting devices

ASTM F3200-22 无人驾驶自动引导工业车辆的标准术语

1.1 This terminology covers terms associated with unmanned (that is, driverless), ground (that is, land-based and in continuous contact with the ground), industrial vehicles. By providing a common and consistent lexicon, the purpose of this terminology is to facilitate communication between individuals who may be involved in the research, design, deployment, and use of unmanned ground vehicles, including but not limited to, for manufacturing, distribution, security, etc. The terminology covers terms used in performance test methods of automatic guided vehicles (AGVs), autonomous mobile robots, and all other driverless, ground vehicles. In addition, with increasingly intelligent vehicle systems with onboard equipment, robotics industry terms that are used in associated test methods and descriptions are also included. 1.2 For the terminology to be harmonious with the practices in the field, definitions have been drawn from the literature or other public sources when possible. When no definition is available, is similar but requires change for use within standards produced by Committee F45, or in dispute, a consensusbased approach will be used to resolve definitions and add them to the lexicon. The development of this terminology is taking place in close coordination with corresponding efforts in all Committee F45 subcommittees to ensure comprehensive and consistent coverage. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Terminology for Driverless Automatic Guided Industrial Vehicles

JIS D 0106:2022 道路车辆. 制动类型, 制动机械和制动操作. 词汇表

Road vehicles-Brake types, braking mechanics and brake operation-Vocabulary

JIS D 0107:2022 道路车辆. 制动装置. 词汇表

Road vehicles -- Braking equipments -- Vocabulary

ISO 7876-5:2021 燃油喷射设备词汇第5部分:共轨燃油喷射系统

This document establishes a vocabulary for common rail (CR) fuel injection systems for diesel (compression-ignition) engines and their components. The terms defined in this document are unique to common rail fuel injection systems, terms and definitions relating to other fuel injection systems are found in the other parts of the ISO 7876 series.

Fuel injection equipment — Vocabulary — Part 5: Common rail fuel injection system