13.220.10 灭火 标准查询与下载

DB5113/T 39-2023 大型商业综合体微型消防站初起火灾处置行动指南

Action Guide for Initial Fire Disposal at Micro Fire Stations in Large Commercial Complexes

GSO ISO 6183:2023 消防设备 室内使用的二氧化碳灭火系统 设计和安装

This document specifies requirements and gives recommendations for the design, installation, testing, maintenance and safety of fixed carbon dioxide firefighting systems in buildings, plants or other structures. It is not applicable to extinguishing systems on ships, in aircraft, on vehicles or on mobile fire appliances, or to below‑ground systems in the mining industry; nor does it apply to carbon dioxide pre-inerting systems. Design of systems where unclosable opening(s) exceed a specified area and where the opening(s) can be subject to the effect of wind is not specified, although general guidance on the procedure to be followed in such cases is given (see 7.4.3.2).

Fire protection equipment — Carbon dioxide extinguishing systems for use on premises — Design and installation

GSO ISO 14520-9:2023 气体灭火系统物理特性和系统设计 第9部分：HFC 227ea灭火剂

This document contains specific requirements for gaseous fire-extinguishing systems, with respect to the HFC 227ea extinguishant. It includes details of physical properties, specifications, usage and safety aspects. This document is applicable to systems operating at nominal pressures of 25 bar, 42 bar and 50 bar with nitrogen propellant. This does not preclude the use of other systems.

Gaseous fire-extinguishing systems — Physical properties and system design — Part 9: HFC 227ea extinguishant

T/CFPA 031-2023 步履式救援机器人 第2部分：试验方法

前言 1  范围　 2  规范性引用文件　 3  术语和定义　 4  试验前的准备　 5  试验内容　 6  数据处理　 附录A　

Walking rescue robot Part 2：Test methods

T/CFPA 030-2023 步履式救援机器人 第1部分： 技术要求

前言 1  范围　 2  规范性引用文件　 3  术语和定义　 4  主要参数　 5  技术要求　 6  检验规则　 7  标志、包装、运输及贮存　

Walking rescue robot—Part 1：Technical requirements

ISO/DIS 7076-6:2023 消防 泡沫灭火系统 第 6 部分：车载压缩空气泡沫系统

Fire protection — Foam fire extinguishing systems — Part 6: Vehicle mounted compressed air foam systems

T/CPQS XF006-2023 消防水带产品维护、更换及售后服务

本文件规定了消防水带产品维护、更换及售后服务的术语和定义，消防水带产品维护授权要求，消防水带产品维护机构分级管理与能力评价要求，消防水带产品维护质量要求，消防水带产品更换、处置要求，消防水带产品维护信息管理要求等。

Maintenance, replacement and after-sale service of fire hose

XF 630-2023 消防腰斧

fire waist ax

XF/T 3019-2023 大型商业综合体消防安全管理规则

Fire safety management rules for large commercial complexes

XF 578-2023 超细干粉灭火剂

Ultrafine dry powder fire extinguishing agent

XF/T 635-2023 消防用红外热像仪

Infrared thermal imaging camera for fire protection

XF/T 3020-2023 灭火剂中全氟辛烷磺酰基化合物（PFOS）的测定方法

Determination method for perfluorooctane sulfonyl compounds (PFOS) in fire extinguishing agents

ISO/DIS 15371:2023 船舶和海洋技术 用于保护厨房烹饪设备的灭火系统

Ships and marine technology — Fire-extinguishing systems for protection of galley cooking equipment

T/CFPA 022-2023 胀喷式干粉灭火装置

前言　 1 范围　 2 规范性引用文件　 3 术语和定义　 4 分类、标记和编码　 5 技术要求　 6 试验方法　 7 检验规则　 8 使用说明书　 9 标志、标签和随行文件　 10 包装、运输和贮存　 附?录?A（规范性附录）灭火装置试验程序及样品数量　 附?录?B（规范性附录）热引发器性能试验程序及样品数量　 附?录?C（规范性附录）支架性能试验程序及样品数量　

Expansion spray dry powder fire extinguishing device

GSO ISO 14520-10:2023 气体灭火系统物理特性和系统设计 第10部分：HFC 23灭火剂

This document contains specific requirements for gaseous fire-extinguishing systems, with respect to the HFC 23 extinguishant. It includes details of physical properties, specifications, usage and safety aspects. It is applicable to systems operating at a nominal pressure of 41 bar without nitrogen superpressurization and 70 bar superpressurized with nitrogen.

Gaseous fire-extinguishing systems — Physical properties and system design — Part 10: HFC 23 extinguishant

ASTM F1546-23 消防软管喷嘴标准规范

1.1 This specification covers the design, manufacture, and testing of fire hose nozzles intended for use with sea water or fresh water either in straight stream or adjustable spray patterns. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Fire Hose Nozzles

ASTM F1994-99(2023) 船用固定泡沫消防系统的标准试验方法

1.1 This test method covers shipboard, fixed (installed) foam/sprinkling firefighting systems. 1.2 Satisfactory completion of these tests indicates functional performance of the fixed foam firefighting system and may be used to demonstrate the system installation’s compliance with the design characteristics of the system. 1.3 Tests made in conformity with this test method are intended to demonstrate the installation and operation of an installed, fixed foam firefighting system. As it includes regulatory requirements, this standard addresses those vessels subject to regulations and ship classification rules. However, the methods stated herein are suitable for unregulated commercial vessels, pleasure craft, military vessels, and similar vessels that are not required to meet regulations for firefighting systems. 1.4 Limitations: 1.4.1 International requirements, national regulations, and ship classification rules must be consulted. The following regulatory requirements and classification society rules were considered in the preparation of this test method: 1.4.1.1 International Convention for the Safety of Life at Sea (SOLAS), 1974 SOLAS Convention, 1978 SOLAS Protocol, and the 1981 and 1983 SOLAS Amendments, II-2/8, “Fixed low-expansion foam extinguishing systems in machinery spaces,” 1.4.1.2 U.S. Government regulations included in 46 CFR 76, 46 CFR 95, and 46 CFR 108 as those regulations are written and enforced by the United States Cost Guard, and 1.4.1.3 The American Bureau of Shipping (ABS) Rules for Building and Classing Steel Vessels. However, the owner will designate the specific classification society which is to be used to classify a particular vessel. 1.4.2 The requirements, regulations, and rules for a specific design must be selected by the owner based on the planned operating profile for the vessel. 1.4.3 This test method reflects international requirements, U.S. Government regulations, and ABS rules in effect at the time it was prepared, and may not include requirements adopted subsequent to the effective date of this test method. 1.4.4 This test method does not include requirements for the selection, design, installation, and maintenance of foam firefighting systems. It applies to installed systems whose designs meet all applicable international requirements, national regulations, and ship classification rules. 1.5 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Shipboard Fixed Foam Firefighting Systems

ISO/DIS 7204 类火灾用润湿剂规范

Specification for wetting agents for application on Class A fires

ISO/DIS 14520-5 气体灭火系统《物理性能与系统设计》第5部分：FK-5-1-12灭火剂

Gaseous fire-extinguishing systems — Physical properties and system design — Part 5: FK-5-1-12 extinguishant

T/CFPA 017-2023 消防员防护辅助装备 阻燃防静电内衣

Firefighter protective auxiliary equipment flame retardant anti-static underwear