13.220.40 材料和制品的可燃性和燃烧性能 标准查询与下载

OENORM EN ISO 9038:2021 液体持续燃烧性的测定（ISO 9038:2021）

Determination of sustained combustibility of liquids (ISO 9038:2021)

IEC 60695-9-2:2021 着火危险试验. 第9-2部分: 表面火焰蔓延. 试验方法总结及相关

This part of IEC 60695-9 presents a summary of published test methods that are used to determine the surface spread of flame of electrotechnical products or materials from which they are formed. It represents the current state of the art of the test methods and, where available,

Fire hazard testing - Part 9-2: Surface spread of flame - Summary and relevance of test methods

DIN EN ISO 9038:2021 液体持续燃烧性的测定（ISO 9038:2021）；德文版 EN ISO 9038:2021

This document specifies a procedure, at temperatures up to 100 °C, to determine whether or not a liquid product, that would be classified as \

Determination of sustained combustibility of liquids (ISO 9038:2021); German version EN ISO 9038:2021

LST EN ISO 9038:2021 液体持续燃烧性的测定（ISO 9038:2021）

Determination of sustained combustibility of liquids (ISO 9038:2021)

BS EN IEC 60695-11-11:2021 火灾测试. 第11-11部分: 试验火焰. 从非接触火源点燃的特性热流量的测量

Fire hazard testing. Test flames. Determination of the characteristic heat flux for ignition from a non-contacting flame source

DS/EN IEC 60695-11-11:2021 火灾隐患测试“第 11-11 部分：测试火焰”非接触式火焰源点火特征热通量的测定

Fire hazard testing – Part 11-11: Test flames – Determination of the characteristic heat flux for ignition from a non-contacting flame source

BS PD IEC TS 60695-11-40:2021 着火危险试验. 第11-40部: 试验火焰. 认可试验. 指导

Fire hazard testing. Test flames. Confirmatory tests. Guidance

GSO IEC 60332-3-24:2021 着火条件下的电力和光纤电缆试验 第3-24部分：垂直安装的成束电线或电缆的垂直火焰蔓延试验 C 类

IEC 60332-3-24:2018 RLV contains both the official IEC International Standard and its Redline version. The Redline version is not an official document, it is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition. IEC 60332-3-24:2018 covers category C for methods of test for the assessment of vertical flame spread of vertically mounted bunched wires or cables, electrical or optical, under defined conditions. This document relates to cables installed on the test ladder to achieve a nominal total volume of non-metallic material of 1,5 l/m of test sample. The flame application time is 20 min. The method of mounting uses the front of the standard ladder. The category is intended for general use where low volumes of non-metallic material are required to be evaluated. The test is intended for type approval testing. The requirements for the selection of cables for testing are given in Annex A. The flame spread is measured as the extent of damage of the cable sample. This procedure can be used to demonstrate the cable’s ability to limit flame spread. A recommended performance requirement is given in Annex B. This second edition cancels and replaces the first edition published in 2000 and Amendment 1:2008. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) adjustments have been made to the title, and elsewhere, to emphasise the standard is applicable to optical fibre cables as well as metallic conductor types; b) details of the way in which cables are mounted on the ladder have been better defined in order to improve repeatability and reproducibility. It has the status of a group safety publication in accordance with IEC Guide 104. The contents of the interpretation sheet 1 of January 2019 have been included in this copy.

Tests on electric and optical fibre cables under fire conditions - Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C

GSO IEC 60332-3-21:2021 着火条件下的电缆试验 第3-21部分：垂直安装的成束电线或电缆的垂直火焰蔓延试验 AF/R 类

IEC 60332-3-21:2000 Specifies method of test for the assessment of vertical flame spread of vertically-mounted bunched wires or cables, electrical or optical, under defined conditions. The test is intended for type approval testing. The requirements for the selection of cables for testing are given. The flame spread is measured as the extent of damage of the cable sample. This procedure may be used to demonstrate the cable's ability to limit flame spread. Covers category A F/R and relates only to power cables of conductor cross-sectional area greater than 35 mm2 installed on the test ladder in a spaced configuration on the front and rear to achieve a nominal total volume of non-metallic material of 7 l/m of test sample. The flame application time is 40 min. This method of mounting is intended for special cable designs used in particular installations when required in the cable specification. Category A F/R is not intended for general use. A recommended performance requirement is also given. It has the status of a horizontal standard in accordance with IEC Guide 104.

Tests on electric cables under fire conditions - Part 3-21: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A F/R

GSO ASTM D93:2021 Pensky Martens Close Cup Tester 闪点测试方法

-

Test Method for Flash Point by Pensky - Martens Close Cup Tester.

GSO IEC 60332-3-23:2021 着火条件下的电力和光纤电缆试验 第3-23部分：垂直安装的成束电线或电缆的垂直火焰蔓延试验 B 类

IEC 60332-3-23:2018 is now available as IEC 60332-3-23:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 60332-3-23:2018 covers category B for methods of test for the assessment of vertical flame spread of vertically-mounted bunched wires or cables, electrical or optical, under defined conditions. This document relates to cables installed on the test ladder to achieve a nominal total volume of non-metallic material of 3,5 l/m of test sample. The flame application time is 40 min. The method of mounting uses the front of the standard ladder. The category is intended for general use where medium volumes of non-metallic material are required to be evaluated. The test is intended for type approval testing. The requirements for the selection of cables for testing are given in Annex A. The flame spread is measured as the extent of damage of the cable sample. This procedure can be used to demonstrate the cable’s ability to limit flame spread. A recommended performance requirement is given in Annex B. This second edition cancels and replaces the first edition published in 2000 and Amendment 1:2008. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) adjustments have been made to the title, and elsewhere, to emphasise the standard is applicable to optical fibre cables as well as metallic conductor types; b) details of the way in which cables are mounted on the ladder have been better defined in order to improve repeatability and reproducibility. It has the status of a group safety publication in accordance with IEC Guide 104.

Tests on electric and optical fibre cables under fire conditions - Part 3-23: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category B

GSO IEC 60695-1-11:2021 火灾危险测试 第1-11部分：电工产品火灾危险评估指南 火灾危险评估

IEC 60695-1-11:2014 provides guidance for assessing the fire hazard of electrotechnical products and for the resulting development of fire hazard testing as related directly to harm to people, animals or property. It outlines a hazard-based process to identify appropriate fire test methods and performance criteria for products. The principles of the methodology are to identify fire events (fire scenarios) which will be associated with the product, to establish how the measurable fire properties of the product are related to the possible occurrence and outcome of those events, and to establish test methods and performance requirements for those properties which will either result in a tolerable fire outcome or eliminate the event altogether. This second edition cancels and replaces the first edition of IEC 60695-1-11 published in 2010, and constitutes a technical revision. The main changes with respect to the previous edition are: - updated references; - updated terms and definitions; - added Figure 5 - Description of range of products and circumstances of use; - and updated Bibliography. Key words: Fire Hazard, Fire Test Method, Assessment This publication is to be read in conjunction with IEC 60695-1-10:2009.

Fire hazard testing - Part 1-11: Guidance for assessing the fire hazard of electrotechnical products - Fire hazard assessment

GSO ASTM E662:2021 固体材料产生的烟雾的比光密度的标准测试方法

-

Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials

ASTM D6890-21 在定容燃烧室内通过燃烧测定柴油燃料油点火延迟和衍生十六烷值（DCN）的标准试验方法

1.1?This automated laboratory test method covers the quantitative determination of the ignition characteristics of conventional diesel fuel oil, oil-sands based fuels, hydrocarbon oils, blends of fuel containing biodiesel material, diesel fuel oils containing cetane number impro

Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber

GSO ISO/TS 19021:2021 ISO 5659-2 中使用傅立叶变换红外光谱法测定气体浓度的试验方法

This document specifies a test method suitable to analyse effluents produced during pyrolysis and combustion of samples and products tested according to ISO 5659-2. The specified test method is based on Fourier-transform infrared (FTIR) spectroscopy described in ISO 19702, with additional information on the test apparatus and analyser calibration suitable for its application to this physical fire model. This document is intended to be used in conjunction with ISO 5659-2 and ISO 19702. The test method provides time-resolved gas concentrations during the whole of an ISO 5659-2 test. This document does not address the accuracy of this fire model for any product application, nor does it address the accuracy of the gas concentrations relative to any real-scale fire tests or fire scenarios. For future conversion of this document into an International Standard, an interlaboratory trial is intended to be conducted to replace Annex B. This document does not include any toxicity assessment or provide input data for fire safety engineering. As combustion conditions vary depending on the oxygen consumption rate in the enclosure during the ISO 5659-2 test, this physical fire model is not recognised as being representative of any specific fire scenario. Therefore, it is difficult to compare test results with real-scale fire conditions. As a consequence, if this test method is used for comparison among materials or products, it is intended to be done in combination with other fire tests.

Test method for determination of gas concentrations in ISO 5659-2 using Fourier transform infrared spectroscopy

prEN ISO 12863:2021 评估香烟引燃倾向的标准测试方法（ISO/DIS 12863:2021）

Standard test method for assessing the ignition propensity of cigarettes (ISO/DIS 12863:2021)

prEN ISO 8130-4:2021 涂料粉末 第4部分：爆炸下限的计算（ISO/DIS 8130-4:2021）

Coating powders - Part 4: Calculation of lower explosion limit (ISO/DIS 8130-4:2021)

DS/IEC TS 60695-11-40:2021 火灾隐患测试 第 11-40 部分：测试火焰 确认测试 指南

Fire hazard testing – Part 11-40: Test flames – Confirmatory tests – Guidance

ASTM D3278-21 用小型闭杯装置测定液体闪点的标准试验方法

1.1?These test methods cover procedures for determining whether a material does or does not flash at a specified temperature (flash/no flash Method A) or for determining the lowest finite temperature at which a material does flash (Method B), when using a small scale closed-cup

Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus

BS EN ISO 9038:2021 液体持续燃烧性的测定

Determination of sustained combustibility of liquids