13.340.20 头部防护设备 标准查询与下载

GA 294-2023 警用防暴头盔

Police riot helmet

ASTM F2220-15(2023) 人头模型标准规范

Standard Specification for Headforms

ASTM F910-04(2023) 青少年棒球面罩标准规范

Standard Specification for Face Guards for Youth Baseball

23/30441375 DC BS ISO 16321-4 职业用眼部和面部防护 第4部分：生物危害防护的附加要求

BS ISO 16321-4. Eye and face protection for occupational use - Part 4. Additional requirements for protection against biological hazards

ISO/FDIS 12311:2023 个人防护装备 太阳镜及相关眼镜的测试方法

Personal protective equipment — Test methods for sunglasses and related eyewear

BS EN 1384:2023 马术活动头盔

1   Scope This document specifies requirements for protective helmets that can have a peak , for people involved in all equestrian activities including but not limited to riding, driving, or handling and caring for horses. It gives safety requirements that include methods of test and levels. Requirements and the corresponding methods of test are given for the following: a) construction, including field of vision; b) shock absorbing properties; c) resistance to penetration; d) mechanical strength in lateral deformation; e) retention system properties; f) deflection of peak (if fitted); g) marking and information; h) use of headforms in accordance with EN 960:2006.

Helmets for equestrian activities

ISO/DIS 16321-4:2023 职业用眼睛和面部防护 第 4 部分：生物危害防护的附加要求

Eye and face protection for occupational use — Part 4: Additional requirements for protection against biological hazards

ISO/DIS 11999-5:2023 消防员个人防护装备 在扑灭结构中发生的火灾时面临暴露于高热和/或火焰风险的消防员使用的个人防护装备的测试方法和要求 第 5 部分：头盔

PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 5: Helmets

ISO/CD 3873:2023 工业安全头盔

Industrial safety helmets

ISO/DIS 11999-9:2023 消防员个人防护装备 在扑灭结构中发生的火灾时面临暴露于高热和/或火焰风险的消防员使用的个人防护装备的测试方法和要求 第 9 部分：消防罩

PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 9: Firehoods

ISO/CD 10256-5:2023 冰球运动用防护装备 第 5 部分：冰球运动员颈部撕裂伤防护具

Protective equipment for use in ice hockey — Part 5: Neck laceration protectors for ice hockey players

23/30469865 DC BS EN 352-2:2020 AMD 1. 听力保护器 一般要求 第 2 部分：耳塞

BS EN 352-2:2020 AMD 1. Hearing protectors. General requirements - Part 2. Earplugs

23/30469862 DC BS EN 13819-1:2020/A1 听力保护器 测试 第 1 部分：物理测试方法

BS EN 13819-1:2020/A1 Hearing protectors - Testing - Part 1. Physical test methods

GSO ISO 18527-1:2023 运动用眼面部防护 第1部分：速降滑雪和单板滑雪护目镜的要求

This document applies to all goggles with plano lenses, intended for eye protection against hazards including ultraviolet and visible solar radiation, rain, snow and wind, during downhill skiing, snowboarding and other similar activities. This document applies to downhill skiing and snowboarding goggles fitted with an insert to carry prescription lenses. It specifies requirements and testing for materials, performance, marking of goggles and information to be supplied by the manufacturer. Information on the selection and use of downhill skiing and snowboarding goggles is given in Annex A. This document does not apply to a) eye protectors for protection when operating or travelling on a motorized vehicle, b) eye protectors for protection against optical radiation from artificial sources, such as those used in solaria, c) eye protectors for direct observation of the sun, and d) eye protectors intended for sports with unrelated hazards and risks.

Eye and face protection for sports use — Part 1: Requirements for downhill skiing and snowboarding goggles

GSO ISO 18527-3:2023 运动用眼面部防护 第3部分：水面游泳用眼镜的要求和测试方法

This document specifies requirements and test methods for eyewear intended for surface swimming only. It contains requirements for eyewear for both recreational and specialist competitive swimming. It deals with materials, construction, optical properties and test methods. Requirements for the labelling and marking of swimming eyewear and for information to be supplied by the manufacturer are also specified. Eyewear intended for surface swimming conforming to the requirements of this standard are suitable for surface use and shallow diving only, e.g. from the edge of a pool, and are not suitable for wear when diving from a high board. This document applies to eyewear that include a) non-prescription nominally plano or afocal lenses, b) non-prescription mass-produced corrective lenses, and c) prescription lenses.

Eye and face protection for sports use — Part 3: Requirements and test methods for eyewear intended to be used for surface swimming

GSO ISO 18527-2:2023 运动用眼部和面部防护 第2部分：壁球用眼部防护装置以及壁球和壁球用眼部防护装置的要求 57

This document applies to all eye protectors intended for eye protection against hazards during playing or instructing in the sports of squash, racquetball and squash 57 and sports with similar hazards and no greater risks. It applies to eye protectors that incorporate prescription lenses but has no specific tests for eye protectors designed for use over spectacles. It specifies requirements and testing for materials, performance, marking of eye protectors and information to be supplied by the manufacturer. Information on the selection and use of eye protectors for squash, racquetball and squash 57 is given in Annex A. This document does not apply to a) sports eye protectors designed for use over prescription spectacles, b) eye protectors for other occupational applications, c) eye protectors without lenses, d) eye protectors for sports where the hazards are unrelated to the hazards in or involve greater risks than squash, racquetball and squash 57, and e) eye protectors with gradient-tinted lenses because they are not appropriate for squash, racquetball or squash 57.

Eye and face protection for sports use — Part 2: Requirements for eye protectors for squash and eye protectors for racquetball and squash 57

GSO ISO 16321-2:2023 职业用眼面部防护 第2部分：焊接和相关技术期间使用的防护装置的附加要求

This document specifies additional material, design, performance and marking requirements for eye and face protectors designed to provide protection for the eyes and faces of persons against occupational hazards, such as optical radiation, impacts from flying particles and fragments, and hot solids during welding and related techniques. The other applicable requirements for welding protectors are given in ISO 16321‑1. This document also applies to welding protectors used in educational establishments. This document also applies to those eye and face protectors used for occupational-type tasks that are performed similarly to an occupation, e.g. "do-it-yourself".

Eye and face protection for occupational use — Part 2: Additional requirements for protectors used during welding and related techniques

GSO ISO 16321-3:2023 职业用眼面部防护 第3部分：网状防护装置的附加要求

This document specifies additional performance and marking requirements for mesh protectors designed to provide protection for the eyes and faces of persons against mechanical hazards such as impacts from flying particles and fragments. The other applicable requirements for mesh protectors and the frames/mountings to which they are intended to be fitted are given in ISO 16321‑1. This document also applies to mesh protectors used in educational establishments. This document also applies to those eye and face protectors used for occupational-type tasks that are performed similarly to an occupation, e.g. "do‑it‑yourself". This document is not applicable to protectors for use against liquid splash (including molten metal), hot solid risks, infrared and ultraviolet radiation. For protection against these hazards suitable additional or alternative protectors according ISO 16321‑1 will be needed. This document does not apply to mesh protectors used in sports such as fencing.

Eye and face protection for occupational use — Part 3: Additional requirements for mesh protectors

ASTM E3368/E3368M-23a 美国公共安全官员佩戴的防弹头盔的标准规范

Standard Specification for Ballistic-Resistant Helmets Worn by U.S. Public Safety Officers

EN 1384:2023 骑马防护头盔

This document specifies requirements for protective helmets that can have a peak, for people involved in all equestrian activities including but not limited to riding, driving, or handling and caring for horses. It gives safety requirements that include methods of test and levels. Requirements and the corresponding methods of test are given for the following: a) construction, including field of vision; b) shock absorbing properties; c) resistance to penetration; d) mechanical strength in lateral deformation; e) retention system properties; f) deflection of peak (if fitted); g) marking and information; h) use of headforms in accordance with EN 960:2006.

Helmets for equestrian activities