13.340.20 头部防护设备 标准查询与下载

23/30453526 DC BS EN 1078 骑自行车者的头盔

BS EN 1078. Helmets for cyclists

23/30455540 DC BS EN 17950 防护头盔 测试方法 减震 包括测量旋转运动学

BS EN 17950. Protective helmets. Test methods. Shock absorption including measuring rotational kinematics

ASTM E3343/E3343M-23 执法和矫正人员佩戴的非防弹头盔的试验方法

1.1 This standard provides nonballistic test methods and conditioning procedures for assessing head protection (that is, helmet and face shield) worn by law enforcement and corrections officers. 1.1.1 Conditioning procedures are included to assess durability in terms of resistance to chemicals and cleaning products, extreme temperatures, weathering, and absorption of liquids. 1.1.2 Test methods are included to assess the protective performance against hazards including impact/bump, projectiles (other than bullets), flame, and liquids. 1.1.3 Test methods are included to assess safety and ergonomic aspects of retention system strength, stability of the helmet on the wearer’s head, corrosion resistance, and face shield visual acuity, field of view, scratch resistance, and anti-mist properties. NOTE 1—These test methods reference published standards from ASTM International and other standards developing organizations. Appendix X1 contains a summary of test methods included in this standard, along with the source and purpose for each. 1.2 These test methods do not address eye protection other than face shields that are attached to the helmet. 1.3 It is anticipated that these test methods will be referenced by suppliers, certifiers, purchasers, or other users to meet their specific needs. Those users will specify, in other standards and specifications, which test methods and conditioning procedures are applicable and will specify any performance categories or levels. 1.3.1 If there is a discrepancy between these test methods and a user-supplied document, the user-supplied document shall take precedence. 1.4 In these test methods, “other standards and specifications” and “unless specified elsewhere” refer to documents (for example, military standards, purchase specifications) that require the use of these test methods. Purchasers and other users are responsible for the “other standards and specifications” and for specifying any requirements that supersede those of these test methods. 1.5 Units—The values stated in either SI units or inchpound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Test Methods for Nonballistic-resistant Helmets Worn by Law Enforcement and Corrections

23/30464477 DC BS EN ISO 16321-1 AMD 1. 职业用途眼部和面部防护 第 1 部分：一般要求

BS EN ISO 16321-1 AMD 1. Eye and face protection for occupational use - Part 1. General requirements

ASTM F1163-23 马运动和骑马用防护头盔的标准规范

1.1 This specification covers minimum performance criteria and describes test methods for protective headgear for use in horse sports and horseback riding. 1.2 It is not the intention of this specification to bar from consideration materials of improved quality or performance not known at the time of development of this specification. 1.3 All testing and requirements of this specification shall be in accordance with Test Methods F1446, except where noted herein. 1.4 The values stated in SI units are to be regarded as the standard. 1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Protective Headgear Used in Horse Sports and Horseback Riding

KS P ISO 19818-1-2022 眼睛和面部防护.激光辐射防护.第1部分:要求和试验方法

Eye and face protection — Protection against laser radiation — Part 1: Requirements and test methods

KS K ISO 18639-5-2022 从事特定救援活动的消防员个人防护装备.第5部分:头盔

PPE ensembles for firefighters undertaking specific rescue activities — Part 5: Helmet

KS K ISO 18639-5:2022 从事特定救援活动的消防员个人防护装备.第5部分:头盔

PPE ensembles for firefighters undertaking specific rescue activities — Part 5: Helmet

T/ZZB 2880-2022 一次性使用医用隔离眼罩

本文件规定了一次性使用隔离眼罩的术语和定义、基本要求、技术要求、试验方法、检验规则、标志、包装、运输与贮存及质量承诺。 本文件适用于以PVC、 PC为主要原材料制成的一次性使用医用隔离眼罩。

Disposable medical isolation eye mask

ASTM F3137-15(2022) 女子长曲棍球（守门员除外）用头套标准规范

1.1 This specification defines performance requirements for headgear to be used by field player’s participating in the sport of women’s lacrosse. The technical requirements in this specification do not address the administrative requirements of lacrosse governing bodies, so it should not be assumed that any headgear satisfying this specification will be acceptable for use in sanctioned lacrosse events. 1.2 The purpose of this specification is to provide reliable and repeatable test methods for the evaluation of protective headgear for women’s adult and youth lacrosse training and play. When designated optional equipment by lacrosse governing bodies, it is important that it not increase the risk of injury to players who choose not to wear it. Impacts from stick, ball, other player, ground, or other objects may be decreased in severity by use of this headgear. However, the relationship between impact and injury is not fully understood. 1.3 No headgear can provide protection against all impacts, foreseeable or not. This specification does not address the potential for injury from any type of impact. 1.4 All testing and requirements of this specification shall be in accordance with Test Methods F1446 and Specification F3077, except where noted in this specification. If there is a conflict between this standard and Test Methods F1446 and Specification F3077, this standard shall control. 1.5 Partial compliance with this standard is prohibited. 1.6 The values stated in SI (International System of Units) units are to be regarded as the standard. The values given in parentheses are for information only. Metric units of measurement in this specification are in accordance with the International System of Units (SI). If a value for measurement as given in this specification is followed by an equivalent value in other units, the first stated is to be regarded as the requirement. A given equivalent value may be approximate. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Headgear Used in Women’s Lacrosse (excluding Goalkeepers)

22/30455535 DC BS EN 397. 工业防护头盔

BS EN 397. Industrial protective helmets

BS EN ISO 12312-1:2022 眼睛和面部保护 太阳镜及相关眼镜 一般用途太阳镜

1   Scope This document is applicable to all afocal (plano power) sunglasses and clip-ons for general use, including road use and driving, intended for protection against solar radiation. Information on the use of sunglass filters is given in Annex A. Requirements for unmounted filters used as replacement or alternative filters are given in Annex C. This document is not applicable to: a) eyewear for protection against radiation from artificial light sources; b) eye protectors intended for specific sports (e.g. ski goggles or other types – see ISO 18527 (all parts)); c) sunglasses that have been medically prescribed for attenuating solar radiation; d) products intended for direct observation of the sun, such as for viewing a partial or annular solar eclipse, for which ISO 12312‑2 applies; e) products intended for occupational eye protection – see, for example, ISO 16321 (all parts).

Eye and face protection. Sunglasses and related eyewear. Sunglasses for general use

ASTM E3111/E3111M-22 抗弹道头部保护的标准试验方法

1.1 These test methods describe the tests for ballisticresistant head protection which consists of helmets and face shields. Test methods address backface deformation, resistance to penetration, and ballistic limit. It is anticipated that these test methods will be referenced by purchasers or other users in specifications or performance standards for helmets in order to meet the user’s specific needs. NOTE 1—ISO/IEC 17025 specifies the general requirements for the competence to carry out tests or calibrations, or both. It covers testing and calibration performed using standard methods, non-standard methods, and laboratory-developed methods. 1.2 These test methods do not address eye protection other than ballistic-resistant face shields that are attached to the helmet. 1.3 These test methods do not specify performance criteria or usages of the test results. 1.4 These test methods include procedures for conditioning of test items prior to ballistic testing. 1.5 In these test methods, “other standards and specifications” and “unless specified elsewhere” refer to documents (for example, military standards, purchase specifications) that require the use of these test methods. Purchasers and other users are responsible for the “other standards and specifications,” and for specifying any requirements that supersede those of these test methods. 1.5.1 Other standards and specifications will specify and describe the ballistic test threats to be used. 1.6 Units—Values stated in either the International System of Units (metric) or U.S. Customary units (inch-pound) are to be regarded separately as standard. The values stated in each system may not be exact equivalents. Both units are referenced to facilitate acquisition of materials internationally and minimize fabrication costs. Tests conducted using either system maintain repeatability and reproducibility of the test method and results are comparable. 1.7 If there is a discrepancy between these test methods and a user supplied document, the user supplied document takes precedence. 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Methods for Ballistic Resistant Head Protection

BS ISO 12312-3:2022 眼睛和面部保护 太阳镜和相关眼镜 用于跑步、骑自行车和类似积极生活方式的太阳镜

1   Scope This document is applicable to all nominally afocal (plano power) sunglasses for protection against environmental elements, such as solar radiation, wind, dust and rain when running, cycling and following similar active lifestyle recreational activities but not intended for competitive sporting activities where enhanced impact resistance is required. The document specifies additional material, design, performance and marking requirements. The other applicable requirements are given in ISO 12312‑1. This type of sunglass is designed to reduce secondary hazards to the wearer in an accident rather than to provide high amounts of impact protection which may be difficult in a spectacle format. This document is not applicable to: a) eyewear for protection against radiation from artificial light sources, such as those used in solaria; b) eye protectors intended for specific sports, e.g. ski goggles or other types – see ISO 18527 (all parts); c) eye protectors for sports that include the use of a ball, stick, bat, racquet or other implement; d) sunglasses that have been medically prescribed for attenuating solar radiation; e) prod...

Eye and face protection. Sunglasses and related eyewear - Sunglasses for running, cycling and similar active lifestyles

EN ISO 12312-1:2022 眼睛和脸部防护.太阳镜和相关眼镜.第1部分:太阳镜的一般用途

This document is applicable to all afocal (plano power) sunglasses and clip-ons for general use, including road use and driving, intended for protection against solar radiation. Information on the use of sunglass filters is given in Annex A. Requirements for unmounted filters used as replacement or alternative filters are given in Annex C. This document is not applicable to: a) eyewear for protection against radiation from artificial light sources; b) eye protectors intended for specific sports (e.g. ski goggles or other types – see ISO18527 (all parts)); c) sunglasses that have been medically prescribed for attenuating solar radiation; d) products intended for direct observation of the sun, such as for viewing a partial or annular solar eclipse, for which ISO12312-2 applies; e) products intended for occupational eye protection – see, for example, ISO16321 (all parts).

Eye and face protection - Sunglasses and related eyewear - Part 1: Sunglasses for general use (ISO 12312-1:2022)

BS EN ISO 16321-3:2022 职业用眼部和面部防护 网状防护装置的附加要求

1   Scope This document specifies additional performance and marking requirements for mesh protectors designed to provide protection for the eyes and faces of persons against mechanical hazards such as impacts from flying particles and fragments. The other applicable requirements for mesh protectors and the frames/mountings to which they are intended to be fitted are given in ISO 16321-1. This document also applies to mesh protectors used in educational establishments. This document also applies to those eye and face protectors used for occupational-type tasks that are performed similarly to an occupation, e.g. "do‑it‑yourself". This document is not applicable to protectors for use against liquid splash (including molten metal), hot solid risks, infrared and ultraviolet radiation. For protection against these hazards suitable additional or alternative protectors according ISO 16321-1 will be needed. This document does not apply to mesh protectors used in sports such as fencing.

Eye and face protection for occupational use - Additional requirements for mesh protectors

ASTM F1492-22 滑板和轮滑用头盔的标准规范

1.1 This specification covers performance requirements for helmets to be used in the activities of skateboarding and trick roller skating. 1.2 All testing and requirements of this specification shall be in accordance with Test Methods F1446, except where noted herein. 1.3 Partial utilization of this specification is prohibited. Any statement of compliance with this specification shall be a certification that the headgear meets all of the requirements of the specification in their entirety. A headgear that fails to meet any one of the requirements of this specification is considered to have failed the specification, and shall not be sold with any indication that it meets parts of the specification. 1.4 This standard is subject to revision at any time by ASTM. It must be reviewed every five years and if not revised either reapproved or withdrawn. References to the standard must include the version date. No references to a version that has been replaced or withdrawn shall be placed on any product or its packaging manufactured more than 24 months after the effective revision or withdrawal date. Go to astm.org to verify the latest version of this standard. 1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Helmets Used in Skateboarding and Trick Roller Skating

ASTM F513-22 曲棍球运动员眼睛和面部防护设备的标准规范

1.1 This specification covers performance requirements and test methods for face protectors marketed, sold, and intended for ice hockey. 1.2 The intent of this specification is to reduce the risk of injury to the face without compromising the form or appeal of the game. To do so, the face protector shall be used: 1.2.1 As intended within the rules of the game and 1.2.2 In accordance with the manufacturer’s instructions. 1.3 Ice hockey is a sport with intrinsic hazards associated with the normal conduct of the game. Participation in ice hockey implies the acceptance of some risk of injury. Use of a face protector certified to this specification will not prevent all injuries. 1.4 This specification has been prepared after careful consideration of the frequency and mechanisms associated with facial and eye injuries that can potentially occur within the rules of the game of ice hockey. 1.5 Requirements and the corresponding test methods, where appropriate, are given for the following: 1.5.1 Construction, 1.5.2 Puck impact resistance, 1.5.3 Penetration, 1.5.4 Field of vision, and 1.5.5 Marking and information. 1.6 Face protection is intended for use by players, goalkeepers, and certain functionaries (for example, referees and coaches). Types of protectors considered under this specification are: 1.6.1 Type B1—A full-face protector intended for use by persons older than ten years of age, other than goaltenders; 1.6.2 Type B2—A full-face protector intended for use by persons ten years of age or younger, other than goaltenders; and 1.6.3 Type C (Visor)—A visor intended for use by person in the junior age category and older, other than goaltenders. 1.7 Units—The values stated in SI units are to be regarded as the standard. No other units of measurement are included in this standard. 1.8 Use of the singular does not exclude the plural (and vice versa) when the sense allows. 1.9 Although the intended primary application of this specification is stated in this scope, note that it remains the responsibility of the users of this specification to judge its suitability for their particular purpose. 1.10 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.11 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Eye and Face Protective Equipment for Hockey Players

ASTM F1045-22 冰球头盔的标准性能规格

1.1 This performance specification2 covers performance requirements for ice hockey helmets. 1.2 The intent of this performance specification is to reduce the risk of injury to the head without compromising the form and appeal of the game. 1.3 This performance specification covers: (1) performance tests for shock absorption properties of the complete helmet and strength and elongation of the chin strap and its attachment; and (2) requirements for area of coverage and penetration. 1.4 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only. 1.5 The following precautionary caveat pertains only to the test methods portion, Section 12, of this performance specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Performance Specification for Ice Hockey Helmets

ASTM F1952-22 下坡山地自行车赛用头盔的标准规范

1.1 This specification covers performance requirements for helmets used by downhill mountain bicycle riders. Studies have shown higher risk to the head and face for this sport as compared to recreational street riding; hence, this specification requires greater impact protection and provides performance criteria for chin bars on full-face helmets, but does not require full-face helmets. This specification recognizes the desirability of lightweight construction and ventilation; however, it is a performance specification and is not intended to restrict design. 1.2 All testing and requirements of this specification shall be in accordance with Test Methods F1446, except where noted herein. 1.3 Partial utilization of this standard is prohibited. Any statement of compliance with this specification must be a certification that the product meets all of the requirements of this specification in its entirety. A product that fails to meet any one of the requirements of this specification is considered to have failed this standard, and should not be sold with any indication that it meets parts of this standard. 1.4 Headgear designed to comply with this and other standards may proclaim uses as certified by the manufacturer. 1.5 This standard is subject to revision at any time by ASTM. It must be reviewed every five years and if not revised either reapproved or withdrawn. References to the standard must include the version date. No references to a version that has been replaced or withdrawn shall be placed on any product or its packaging manufactured more than 24 months after the effective revision or withdrawal date. Go to astm.org to verify the latest version of this standard. 1.6 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.7 The following safety caveat applies to the chemical, mechanical, or physical, or a combination thereof, test methods described herein and is meant specifically for those performing the tests (in an effort to provide them with notice to take the appropriate precautions when conducting the tests): This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Helmets Used for Downhill Mountain Bicycle Racing