13.340.99 其他防护设备 标准查询与下载

GOST R EN 353-1-2008 职业安全标准体系.防止高处掉落用个人防护装置.包括固定锚线的制导防坠装置.第1部分:一般技术要求.测试方法

Occupational safety standards system. Personal protective equipment against falls from a height. Guided type fall arresters including a rigid anchor line. Part 1. General technical requirements. Test methods

GOST R EN 361-2008 职业安全标准体系.防止高处掉落用个人防护装置.全身式安全带.一般技术要求.测试方法

Occupational safety standards system. Personal protective equipment against falls from a height. Full body harnesses. General technical requirements. Test methods

GOST R EN 362-2008 职业安全标准体系.防止高处掉落用个人防护装置.连接器.一般技术要求.测试方法

Occupational safety standards system. Personal protective equipment against falls from a height. Connectors. General technical requirements. Test methods

SANS 33:2007 工业绳索技术作业用设备

Describes the requirements for equipment used for industrial rope access work.

Equipment for use in industrial rope access work

GA/T 717-2007 摩托车安全气囊服

本标准规定了摩托车安全气囊服的要求、试验方法、检验规则以及标志、包装、运输与贮存。 本标准适用于摩托车安全气囊服。

Safety cloth with inflatable bag for motorcycle

ANSI Z359.1-2007 人员坠落制动系统、子系统和元部件的安全要求

This standard establishes requirements for the performance, design, marking, qualification, instruction, training, inspection, use, maintenance and removal from service of connectors, full body harnesses, lanyards, energy absorbers, anchorage connectors,

Safety Requirements for Personal Fall Arrest Systems, Subsystems, and Components

LST EN 365-2004/AC-2007 防止高处坠落的个人防护设备 使用、维护、定期检查、修理、标记和包装说明的一般要求

Personal protective equipment against falls from a height - General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging

GA 69-2007 防爆毯

本标准规定了防爆毯产品命名、技术要求、试验方法、检验规则、包装、运输和贮存等。 本标准适用于防爆毯。

Bomb suppression blanket

NAVY MS90387 REV H-2007 塑料和金属安全带的手动调节工具

This specification sheet is approved for use by all Departments and Agencies of the Department of Defense.The requirements for acquiring the product specified herein shall consist of this specification sheet and MIL-DTL-81306.

TOOL, HAND, ADJUSTABLE FOR PLASTIC AND METAL TIEDOWN STRAPS

LST EN 12841-2007 个人坠落保护设备 绳索接入系统 绳索调节装置

Personal fall protection equipment - Rope access systems - Rope adjustment devices

GOST R EN 353-2-2007 职业安全标准体系.包括灵活锚线的制导防坠装置.第2部分:一般技术要求.测试方法

Occupational safety standards system. Guided type fall arresters including a flexible anchor line. Part 2. General technical requirements. Test methods

GOST R EN 363-2007 职业安全标准体系.防止高处掉落用个人防护装置.防坠系统.一般技术要求

Occupational safety standards system. Personal protective equipment against falls from a height. Fall arrest systems. General technical requirements

NF S71-520*NF EN 12841:2006 个人防跌落设备.绳索接近系统.绳索调整设备

Personal fall protection equipment - Rope access systems - Rope adjustment devices.

GA 614-2006 警用防割手套

本标准规定了警用防割手套的要求、试验方法、检验规则和标志、包装、运输及贮存。 本标准适用于警用防割手套的生产、检验、验收与定购。

Cut-resistant gloves for police

CNS 14998-2006 抗弹防护材料

本标准适用于以金属、陶瓷、透明玻璃、纤维织品、纤维强化塑料等，单独或组合制成的抗弹防护材料(以下简称防护材料)，惟不适用于军警防弹背心及防弹头盔。

Ballistic resistant protective materials

NAVY MS22033 REV F (1)-2005 折叠式航空器安全带

Material dyed sage green shall be a visual match to FED-STD-595, sage green, # 34158 or 34159. All stitching shall be in accordance with ASTM-D6193, type 301, and be not less than 4 nor greater than 6 stitches per inch except as noted. Ends of stitching shall be backstitched a distance of not less than ½ inch. Stitching shall be with nylon thread, # 6 cord except as noted.

BELT, AIRCRAFT SAFETY, LAP

BS 8437:2005 工作场所使用的人员防跌落系统和设备的选择、使用和维护的实施规范

This British Standard gives recommendations and guidance on the selection, use and maintenance of personal fall protection systems and equipment for use in the workplace to prevent and/or to arrest falls from a height, including systems and equipment suitable for use in rescue. It also gives guidance on rescue of persons working at a height, in the event of an accident. It is intended for use by employers, employees and self-employed persons who use personal fall protection systems and equipment. It is also intended for use by designers, e.g. architects and structural engineers, including those who are responsible for the design of safe access routes on buildings and structures, by those who commission work at a height, e.g. building owners and contractors, and by those involved in training persons for work at a height. The standard is not applicable to collective fall protection systems, for example work platforms and fall arrest nets. It is not intended to apply to personal fall protection systems and equipment for use in leisure activities or in professional or private sports activities. It is also not intended to apply to personal fall protection systems and equipment for use in arboriculture. NOTE 1 A discussion of the basic principles of fall protection is given in Annex A. NOTE 2 Recommendations and guidance on the use of rope access methods are given in BS 7985.

Code of practice for selection, use and maintenance of personal fall protection systems and equipment for use in the workplace

BS 8437:2005+A1:2012 工作场所使用的人员防跌落系统和设备的选择、使用和维护的实施规程

Code of practice for selection, use and maintenance of personal fall protection systems and equipment for use in the workplace

LST EN 362-2005 防止从高处坠落的个人防护设备 连接器

Personal protective equipment against falls from a height - Connectors

CSA Z259.11-2005(R2010) 能量吸收器和挂绳

1 Scope 1.1 General This Standard specifies requirements for the performance, design, testing, marking, and instructions of energy absorbers and lanyards, including lineman's pole straps and integrally connected lanyards and energy absorbers. 1.2 Applications Energy absorbers and lanyards are used as parts of complete fall arrest, travel restraint, fall restrict, or work positioning systems, as applicable. The scope of this Standard does not include information regarding the proper selection of components in order to assure the intended performance of these systems. 1.3 Exclusions This Standard is not intended for lanyards that are used exclusively as anchorage connectors or used for recreational activities such as climbing or mountaineering. 1.4 Terminology In CSA Standards, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; "may" is used to express an option or that which is permissible within the limits of the standard; and "can" is used to express possibility or capability. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application. 1.5 Units of measure The values given in SI (metric) units are the standard. The values given in parentheses are approximate and are for information only.

Energy Absorbers and Lanyards