21.060.01 紧固件综合 标准查询与下载

GSO ISO 16047:2014 紧固工具 扭矩/固定强度测试

This International Standard specifies the conditions for carrying out torque/clamp force tests on threaded fasteners and related parts. It is applicable, basically, to bolts, screws, studs and nuts made of carbon steel and alloy steel, whose mechanical properties are specified in ISO 898-1, ISO 898-2 or ISO 898-6, having ISO metric threads with thread sizes M3 to M39. It is also applicable to the combination of other externally and internally threaded fasteners with a triangular ISO thread according to ISO 68-1. It is not applicable to set screws and similar threaded fasteners that are not under tensile stresses, nor to screws which form their own mating thread or threaded fasteners having additional self-locking features. Unless otherwise agreed, the tests are carried out at room temperature. However, tests carried out under standard conditions are made at a temperature of 10 °C to 35 °C. This method allows determination of the tightening characteristics of threaded fasteners and related parts.

Fasteners -- Torque/clamp force testing

BS 746:2014 燃气表活接头与转接器用规范

This British Standard specifies requirements and test methods for unions and adaptors for the installation of low pressure gas meters. It is applicable to unions and adaptors for gas meters for use with 1st,2nd and 3rd family gases at temperatures between -20℃ and +60℃,up to a maximum operating pressure of 75 mbar and a maximum incidental pressure of 200 mbar. The gas tightness of the gas meter unions and adaptors is also specified. NOTE The tests specified in this standard are type tests,except for that specified in 4.2.3.

Specification for gas meter unions and adaptors

JIS B 1003:2014 紧固件.ISO公制外螺纹零件端头

This Standard specifies the form and dimensions of ends of parts with external ISO metric screw thread (e.g. bolt,screw and stud ends) recommended for use. They apply to standardized or non-standardized threaded parts.

Fasteners.Ends of parts with external ISO metric thread

GOST ISO 16048-2014 耐腐蚀不锈钢紧固件的钝化

Passivation of corrosion-resistant stainless-steel fasteners

ASTM F606/F606M-14a 测定外螺纹及内螺纹紧固件, 垫圈, 直接测张器和铆钉机械特性的标准试验方法

1.1 These test methods cover establishment of procedures for conducting tests to determine the mechanical properties of externally and internally threaded fasteners, washers, direct tension indicators, and rivets. 1.2 Property requirements and the applicable tests for their determination are specified in individual product standards. In those instances where the testing requirements are unique or at variance with these standard procedures, the product standard shall specify the controlling testing requirements. In the absence of any specified test requirement(s), these test methods shall apply. 1.3 These test methods describe mechanical tests for determining the following properties:   Section For Externally Threaded Fasteners: 3 8199;Product Hardness 3.1 8199;Proof Load 3.2.1 8199;8199;Method 1, Length Measurement 3.2.3 8199;8199;Method 2, Yield Strength 3.2.4 8199;8199;Method 3, Uniform Hardness 3.2.5 8199;Axial Tension Testing of Full-Size Product 3.4 8199;Wedge Tension Testing of Full-Size Product 3.5 8199;Tension Testing of Machined Test Specimens

Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets

ASTM A962/A962M-14a 用于从低温至蠕变范围内任何温度的螺栓通用要求的标准规格

1.1 This specification covers a group of common requirements that shall apply to carbon, alloy, stainless steel, and nickel alloy bolting under any of the following ASTM Specifications (or under any other ASTM Specifications that invoke this specification or portions thereof): Title of Specifications ASTM Designation Alloy-Steel and Stainless Steel Bolting Materials 8199;for High-Temperature Service A193/A193M Carbon and Alloy Steel Nuts for Bolts for High 8199;Pressure and High-Temperature Service A194/A194M Alloy Steel Bolting Materials for Low-Temperature 8199;Service A320/A320M Alloy-Steel Turbine-Type Bolting Material 8199;Specially Heat Treated for High-Temperature 8199;Service A437/A437M High-Temperature Bolting Materials With Expansion 8199;Coefficients Comparable to Austenitic Stainless 8199;Steels A453/A453M Alloy-Steel Bolting Materials for Special Applications A540/A540M Precipitation-Hardening Bolting Material (UNS 8199;N07718) for High Temperature Service A1014/A1014M 1.2 In case of conflict, the requirements of the individual product specification shall prevail over those of this specification. 1.3 Fasteners are a wide-ranging classification that includes screws, bolts, nuts, washers, stud bolts, rivets, powder-actuated studs, staples, tacks, and pins. Bolting, which is composed of bolting materials, such as rods, bars, flats, and forgings, which are subsequently manufactured into bolting ......

Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range

ASTM F606M-13a 测定垫圈和铆钉的内外螺纹紧固件机械性能的标准试验方法（米制）

Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets (Metric)

VDA 235-204-2013 汽车工业用高强度紧固件

High-strength fasteners for the automotive industry

DIN EN ISO 12996:2013 机械连接.结合部位的破坏性试验.单接缝拉力剪切测试用样本尺寸规格和试验规程(ISO 12996-2013).德文版本EN ISO 12996-2013

Mechanical joining - Destructive testing of joints - Specimen dimensions and test procedure for tensile shear testing of single joints (ISO 12996:2013); German version EN ISO 12996:2013

GSO ISO 10683:2013 紧固件 -应用非电解锌饰面涂层

This International Standard specifies requirements for thickness, corrosion resistance and mechanical and physical properties of non-electrolytically applied zinc flake coatings on steel fasteners with metric threads. It applies to both coatings with or without chromate. Coatings according to this International Standard may also be applied to steel screws which form their own mating threads such as wood screws, self tapping screws, self drilling screws, thread cutting screws and thread rolling screws as well as to non-threaded steel parts such as washers and pins. They may be similarly applied to steel fasteners with other types of thread. Coatings according to this International Standard can be supplied with integral lubricant and/or with a subsequently added lubricant

Fasteners -- Non-electrolytically applied zinc flake coatings

GSO ISO 1891:2013 紧固件 术语

Abstract ISO 1891:2009 provides translation guidance for terms commonly used to describe fasteners. ISO 1891:2009 lays down the terminology of fasteners in English, French and Russian, recommended for use unless otherwise specified in the appropriate product standard. At present, not all of the fasteners listed are covered by ISO documents. For the main part, the items have been selected from existing national standards. Also included are obsolescent types (those being used up from stock) in order that their terminology may be standardized at the same time. The drawings are essentially diagrammatic, in particular those showing bolts and screws having special characteristics. In addition to terms used in the three official ISO languages (English, French and Russian), ISO 1891:2009 gives the equivalent terms in Chinese, German, Italian, Japanese, Spanish, and Swedish; these are published under the responsibility of the member bodies for China (SAC), Germany (DIN), Italy (UNI), Japan (JISC), Spain (AENOR), and Sweden (SIS), respectively, and are given for information only. Only the terms given in the official languages can be considered as ISO terms.

Fasteners -- Terminology

GSO ASTM F606:2013 测定外螺纹和内螺纹紧固件、垫圈和铆钉机械性能的标准试验方法

1.1 These test methods cover establishment of procedures for conducting tests to determine the mechanical properties of externally and internally threaded fasteners, washers, direct tension indicators, and rivets. 1.2 Property requirements and the applicable tests for their determination are specified in individual product standards. In those instances where the testing requirements are unique or at variance with these standard procedures, the product standard shall specify the controlling testing requirements. 1.3 These test methods describe mechanical tests for determining the following properties: Section For Externally Threaded Fasteners: 3 Product Hardness 3.1 Proof Load 3.2.1 Method 1, Length Measurement 3.2.3 Method 2, Yield Strength 3.2.4 Method 3, Uniform Hardness 3.2.5 Axial Tension Testing of Full-Size Product 3.4 Wedge Tension Testing of Full-Size Product 3.5 Tension Testing of Machined Test Specimens 3.6 Total Extension at Fracture Test Single Sheer Test 3.7 3.8 For Internally Threaded Fasteners: 4 Product Hardness 4.1 Proof Load Test 4.2 Cone Proof Load Test 4.3 For Washers and Direct Tension Indicators: 5 Product Hardness-General Requirements 5.1 Through Hardened Washers 5.2 Carburized Washers 5.3 Stainless Steel and Nonferrous Washers 5.4 Direct Tension Indicators 5.5 Compression Load 5.6 For Rivets: 6 Product Hardness 6.1 Test for Embrittlement of Metallic-Coated Externally Threaded Fasteners 7 Test Method for Determining Decarburization and Carburization 8 1.4 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard. NOTE 1—Acomplete metric companion to Test Methods F606 has been developed—F606M; therefore, no metric equivalents are shown in these test methods. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets

NF E25-039:2013 紧固件 螺钉、螺母和自锁螺母的扭矩/张力测试 标准 NF EN ISO 16047 和 NF EN ISO 2320 的补充

Fixations - Essais de couple/tension pour les vis, écrous et écrous autofreinés - Compléments aux normes NF EN ISO 16047 et NF EN ISO 2320

DIN 20000-6:2013 建筑物中建筑产品的应用.第6部分:依据EN 14592-2009-02和EN 14545-2009-02标准的紧固件和连接器

Application of construction products in structures - Part 6: Fasteners and connectors according to EN 14592:2009-02 and EN 14545:2009-02

SAE J485-2013 开口销用螺栓孔与螺母螺杆尾和槽

SAE J485 specifies the recommended nominal diameters and locations of holes in bolt or screw shanks, and nominal widths and depths of slots in nuts, for use with the recommended sizes of inch-series cotter pins, as shown.

Holes in Bolt and Screw Shanks and Slots in Nuts for Cotter Pins

SAE J1701-2013 英制系列紧固件扭矩拉伸紧固

This SAE Information Report is provided as a advisory guide. Individual appalication discretion is recommended. The content has been presented as accurately as possible, but responsibility for its application lies with the user. The document covers the variables in the torque-tension relationship: friction, materials, temperature, humidity, fastener and mating part finishes, surfaces, and the kind of wrenching employed. Also described in this document is the torque management required to achieve correct fastener joint tightening. The thread fit of fasteners must be in accordance with Class 2A for external and 2B for internal inch threads.

Torque-Tension Tightening for Inch Series Fasteners

SAE J430-2013 非螺纹紧固件碳钢实心铆钉英制系列用机械和化学要求

These specifications cover the mechanical and chemical requirements, and surface discontinuities limits for carbon steel solid rivets used in automotive and other related industries.

Mechanical and Chemical Requirements for Nonthreaded Fasteners Carbon Steel Solid Rivets Inch Series

SAE J1648-2013 紧固件的防护涂料

This SAE Information Report is provided as an advisory guide. Careful discretion as to application is recommended. The content has been presented as accurately as possible, but responsiblity for its application lies with the user. It covers finishes applied to fasteners and related topics, corrosion resistance, lubricity, electrical grounding, ultraviolet light, and embrittlement. Table 1 lists these coatings and their properties so that finish selection can be reasonably made in accordance with known and anticipated fastener assembly applications. Application of protective coatings will affect fastener dimensions. This is especially critical for the thread

Protective Coatings for Fasteners

SAE J174M-2013 公制系列钢制螺纹紧固件的扭矩拉伸试验方法

This test procedure is intended to provide a quality control method for checking torque-tension characteristics of non-prevailing torque type threaded steel fasteners 6 through 24 mm nomial diameters. Realistically, torque- tension relationships for specific individual fastener assembly joints will vary due to the different joint parameters. Tests using actual joint components will be required to determine accurate torque-tension values for those conditions. For the inch series version, see SAE J174.

Torque-Tension Test Procedure for Steel Threaded fasteners Metric Series

GSO ISO 4753:2013 紧固件（紧固件） 带有公制 ISO 外螺纹的零件端部

This International Standard specifies the form and dimensions of ends of parts with external ISO metric screw thread (e.g. bolt, screw and stud ends) recommended for use. They apply to standardized or nonstandardized threaded parts. For each end type, a symbol is specified and it is intended that these symbols be used when specifying one of the ends for threaded fasteners.

Fasteners -- Ends of parts with external ISO metric thread