21.060.40 铆钉 标准查询与下载

GSO ISO 15981:2013 带分离拉手和悬臂头的实心开口铆钉 AIA/AIA

This International Standard specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with an aluminium alloy body (AlA) and an aluminium alloy mandrel (AlA) and with nominal diameters, d, from 2,4 mm up to and including 6,4 mm

Open end blind rivets with break pull mandrel and protruding head -- AIA/AIA

GSO ISO 16584:2013 带分离拉手和悬臂头的实心开口铆钉 NiCu/St 或 NiCu/SSt

This International Standard specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel, protruding head, with a nickel copper body (NiCu) and either a steel (St) or stainless steel (SSt) mandrel and with nominal diameters, d, from 3,2 mm up to and including 6,4 mm

Open end blind rivets with break pull mandrel and protruding head -- NiCu/St or NiCu/SSt

GSO ISO 15977:2013 带分离拉手和悬臂头的实心开口铆钉 AIA/St

This International Standard specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with an aluminium alloy body (AIA) and a steel mandrel (St) and with nominal diameters, d, from 2,4 mm up to and including 6,4 mm

Open end blind rivets with break pull mandrel and protruding head -- AIA/St

GSO ISO 15976:2013 带分离拉手和悬臂头的实心锁紧铆钉 St/St

This International Standard specifies dimensional and mechanical characteristics and application data for closed end blind rivets with break pull mandrel and protruding head, with a steel body (St) and an steel mandrel (St) and with nominal diameters, d, from 3,2 mm up to and including 6,4 mm

Closed end blind rivets with break pull mandrel and protruding head -- St/St

GSO ISO 15980:2013 带拉断芯轴和沉头的开口抽芯铆钉 St/St

This International Standard specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with a steel body and a steel mandrel and with nominal diameters, d, from 2,4 mm up to and including 6,4 mm

Open end blind rivets with break pull mandrel and countersunk head -- St/St

GSO ISO 15984:2013 带拉断芯轴和沉头的开口抽芯铆钉 A2/A2

This International Standard specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and countersunk head, with an austenitic stainless steel body (A2) and an austenitic stainless steel mandrel (A2) and with nominal diameters, d, from 3 mm up to and including 5 mm

Open end blind rivets with break pull mandrel and countersunk head -- A2/A2

GSO ISO 15973:2013 带分离拉手和悬臂头的实心锁紧铆钉 AIA/St

This International Standard specifies dimensional and mechanical characteristics and application data for closed end blind rivets with break pull mandrel and protruding head, with an aluminium alloy body (AlA) and a steel mandrel (St) and with nominal diameters from 3,2 mm up to and including 6,4 mm.

Closed end blind rivets with break pull mandrel and protruding head -- AlA/St

GSO ISO 16583:2013 带拉断心轴和沉头的开口抽芯铆钉 Cu/St 或 Cu/Br 或 Cu/SSt

This International Standard specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and countersunk head, with a copper body (Cu) and either a steel (St) or a bronze (Br) or a stainless steel (SSt) mandrel and with nominal diameters from 3 mm up to and including 4,8 mm

Open end blind rivets with break pull mandrel and countersunk head -- Cu/St or Cu/Br or Cu/SSt

GSO ISO 15975:2013 带拉断芯轴和凸头的闭端抽芯铆钉 AI/AIA

This International Standard specifies dimensional and mechanical characteristics and application data for closed end blind rivets with break pull mandrel and protruding head, with a commercially pure aluminium body (Al) and an aluminium alloy mandrel (AlA) and with nominal diameters, d, from 3,2 mm up to and including 4,8 mm

Closed end blind rivets with break pull mandrel and protruding head -- AI/AIA

GSO ISO 15974:2013 带拉断心轴和沉头的闭端抽芯铆钉 AlA/St

This International Standard specifies dimensional and mechanical characteristics and application data for closed end blind rivets with break pull mandrel and protruding head, with an aluminium alloy body (AlA) and a steel mandrel (St) and with nominal diameters from 3,2 mm up to and including 4,8 mm.

Closed end blind rivets with break pull mandrel and countersunk head -- AlA/St

GSO ISO 16585:2013 带分离拉手和悬臂头的实心锁紧铆钉 A2/SSt

This International Standard specifies dimensional and mechanical characteristics and application data for closed end blind rivets with break pull mandrel and protruding head, with an austenitic stainless-steel body (A2) and a stainless-steel mandrel (SSt) and with nominal diameters, d, from 3,2 mm up to and including 6,4 mm

Closed end blind rivets with pull mandrel and protruding head -- A2/SSt

GSO ISO 15978:2013 带间隔拉手和沉头的实心开口铆钉 AIA/St

This International Standard specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and countersunk head, with an aluminium alloy (AIA) body and a steel (St) mandrel with nominal diameters, d, from 2,4 mm up to and including 5 mm

Open end blind rivets with break pull mandrel and countersunk head -- AIA/St

GSO ISO 16582:2013 带间隔拉手和悬臂头的实心开口铆钉 Cu/St 或 Cu/Br 或 Cu/SSt

This International Standard specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with a copper body (Cu) and either a steel (St) or a bronze (Br) or a stainless steel (SSt) mandrel and with nominal diameters, d, from 3 mm up to and including 4,8 mm

Open end blind rivets with break pull mandrel and protruding head -- Cu/St or Cu/Br or Cu/SSt

KS R 2031-2012 汽车用冷沉头铆钉

Cold countersunk head rivets for automobiles

DIN 6792:2012 沉头半空心铆钉.公差直径1.6 mm至10 mm

Semi-tubular countersunk head rivets - Nominal diameters 1,6 mm to 10 mm

DIN 6791:2012 盘头半空心铆钉.公差直径1.6 mm至10 mm

Semi-tubular pan head rivets - Nominal diameters 1,6 mm to 10 mm

DIN 660:2012 圆头铆钉.公称直径1 mm至8 mm 

Round head rivets - Nominal diameters 1 mm to 8 mm

DIN 675:2011 平埋头铆钉.公差直径3 mm至5 mm

This Standard specifies dimensions, masses and technical delivery conditions for flat countersunk head rivets with nominal diameters from 3mm to 5mm.

Flat countersunk head rivets - Nominal diameters 3 mm to 5 mm

DIN 661:2011 沉头铆钉.公差直径1 mm至8 mm

This Standard specifies dimensions, masses and technical delivery conditions for flat countersunk head rivets with nominal diameters from 1mm to 8mm.

Countersunk head rivets - Nominal diameters 1 mm to 8 mm

DIN 7338:2011 制动装置衬里和离合器衬里的铆钉

Rivets for brake linings and clutch linings