29.035.01 绝缘材料综合 标准查询与下载
共找到 1092 条与 绝缘材料综合 相关的标准，共 73 页
为规范产品生产要求，针对伴热（绝缘）管产品进行规定，通过对伴热（绝缘）管的材料、检验、生产等参数进行规定，以提高伴热(绝缘)管产品性能，助力推动社会绿色可持续发展，特制定本标准。
Technical conditions for heat tracing (insulation) pipes
- ICS
- 29.035.01
- CCS
- C383
- 发布
- 2024-03-15
- 实施
- 2024-04-15
本文件规定了N型TOPCON太阳能电池组件封装用聚烯烃(POE）胶膜（以下简称POE胶膜）的术语和定义、要求、试验方法、检测规则、包装、标志、运输和贮存。 本文件适用于N型TOPCON太阳能电池组件封装用聚烯烃(POE）胶膜。
N-type TOPCON solar cell module encapsulation polyolefin (POE) film
- ICS
- 29.035.01
- CCS
- C382
- 发布
- 2023-11-21
- 实施
- 2023-11-21
Resin based reactive compounds used for electrical insulation — Part 3-8: Specifications for individual materials — Resins for cable accessories
- ICS
- 29.035.01
- CCS
- 发布
- 2023-10-20
- 实施
Standard Test Methods for Thickness of Solid Electrical Insulation
- ICS
- 29.035.01
- CCS
- 发布
- 2023-10-01
- 实施
IEC 60626-1:2023 is available as IEC 60626-1:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 60626-1:2023 contains the definitions related to and the general requirements to be fulfilled by combined flexible materials for electrical insulation. This document does not include mica papers used as a primary component, which are covered by the IEC 60371 series, but insulation materials based on mica paper can be used as component of a combined flexible material. Materials which conform to this specification meet established levels of performance. However, the selection of material by a user for a specific application is based on the actual requirements necessary for adequate performance in that application and not based on this specification alone. This fourth edition cancels and replaces the third edition published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) the materials available for use within this series of standards have been updated; b) a framework has been created to allow test methods beyond those used for quality control specifications to allow for testing for qualification purposes.
Combined flexible materials for electrical insulation - Part 1: Definitions and general requirements
- ICS
- 29.035.01
- CCS
- 发布
- 2023-09-22
- 实施
- 2023-12-20 (7)
1.1 This test method is intended to differentiate solid electrical insulating materials with respect to their resistance to the action of electric arcs produced by conduction through surface films of a specified contaminant containing moisture. Test Methods D2302 , D2303 , D3638 , and D5288 are also useful to evaluate materials. 1.2 Units— The values stated in SI units are the standard. The inch-pound units in parentheses are for information only. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Note 1: There is no equivalent ISO standard. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Test Method for Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials
- ICS
- 29.035.01
- CCS
- 发布
- 2023-09-15
- 实施
Standard Specification for In-Service Care of Insulating Line Hose and Covers
- ICS
- 29.035.01
- CCS
- 发布
- 2023-09-01
- 实施
Combined flexible materials for electrical insulation - Part 1: Definitions and general requirements
- ICS
- 29.035.01
- CCS
- 发布
- 2023-08-16
- 实施
Combined flexible materials for electrical insulation - Part 1: Definitions and general requirements
- ICS
- 29.035.01
- CCS
- 发布
- 2023-08-16
- 实施
1.1 This test method2 provides procedures for evaluating the thermal endurance of rigid electrical insulating materials. Dielectric strength, flexural strength, or water absorption are determined at room temperature after aging for increasing periods of time in air at selected-elevated temperatures. A thermal-endurance graph is plotted using a selected end point at each aging temperature. A means is described for determining a temperature index by extrapolation of the thermal endurance graph to a selected time. 1.2 This test method is most applicable to rigid electrical insulation such as supports, spacers, voltage barriers, coil forms, terminal boards, circuit boards and enclosures for many types of application where retention of the selected property after heat aging is important. 1.3 When dielectric strength is used as the aging criterion, it is also acceptable to use this test method for some thin sheet (flexible) materials, which become rigid with thermal aging, but is not intended to replace Test Method D1830 for those materials which must retain a degree of flexibility in use. 1.4 This test method is not applicable to ceramics, glass, or similar inorganic materials. 1.5 The values stated in metric units are to be regarded as standard. Other units (in parentheses) are provided for information. 1.6 When determining the thermal endurance of rigid EIM, the basic concepts in this standard follow IEEE 1, IEEE 98, and IEEE 101. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. A specific warning statement is given in 11.3.4 . 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Test Method for Thermal Endurance of Rigid Electrical Insulating Materials
- ICS
- 29.035.01
- CCS
- 发布
- 2023-06-09
- 实施
本文件规定了高固体份环氧绝缘漆试验方法的术语和定义、试验条件、试验的一般要求、试验方法、试验报告。 本文件适用于高固体份环氧绝缘漆的试验与检验。
Test method for high solid epoxy insulating varnish
- ICS
- 29.035.01
- CCS
- C383
- 发布
- 2023-05-18
- 实施
- 2023-06-02
本文件规定了高固体份环氧绝缘漆的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于高固体份环氧绝缘漆的生产及检验。
High solids epoxy insulating varnish
- ICS
- 29.035.01
- CCS
- C383
- 发布
- 2023-05-18
- 实施
- 2023-06-02
Dielectric and resistive properties of solid insulating materials - Part 3-1: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity - General method
- ICS
- 29.035.01
- CCS
- 发布
- 2023-01-23
- 实施
Dielectric and resistive properties of solid insulating materials - Part 3-1: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity - General method
- ICS
- 29.035.01
- CCS
- 发布
- 2023-01-23
- 实施
