29.120.01 电工器件综合 标准查询与下载

T/ZZB 2160-2021 固定式北斗船舶示位仪

本文件规定了固定式北斗船舶示位仪的术语和定义、产品分类、基本要求、技术要求、检验规则、标志、包装、运输和贮存、安装以及质量承诺。 本文件适用于固定式北斗船舶示位仪（以下简称示位仪）。

Stationary ship position indicator based on Beidou

BS PD IEC TS 63236-1:2021 安装在数据中心和电信中心办公室的用于信息和通信技术设备的直流（DC）设备耦合器 2.6千瓦系统

Direct current (DC) appliance couplers for information and communication technology (ICT) equipment installed in data centres and telecom central offices. 2,6 kW system

BS PD IEC TS 63236-2:2021 安装在数据中心和电信中心办公室的用于信息和通信技术设备的直流（DC）设备耦合器 5.2kW系统

Direct current (DC) appliance couplers for information and communication technology (ICT) equipment installed in data centres and telecom central offices. 5,2 kW system

BS PD IEC TS 63236-3:2021 安装在数据中心和电信中心办公室的用于信息和通信技术设备的直流（DC）设备耦合器 交直流电器插座

Direct current (DC) appliance couplers for information and communication technology (ICT) equipment installed in data centres and telecom central offices. AC/DC appliance inlet

T/YIIEE 06-2021 低压直流接触器

规定了直流接触器的术语和定义、分类、低压直流接触器特征、产品资料、正常的使用安装和运输条件、 结构和性能要求、试验、质量承诺。

Low voltage DC contactor

GSO IEC 63044-5-1:2021 家庭和楼宇电子系统 (HBES) 以及楼宇自动化和控制系统 (BACS) 第5-1部分：EMC 要求、条件和测试设置

IEC 63044-5-1:2017 is a product family standard that sets the minimum level of EMC performance for the HBES/BACS network in addition to the product EMC standards for HBES/BACS devices. It also applies to devices used within an HBES/BACS network for which no specific HBES/BACS product EMC standard exists. In addition, it defines EMC requirements for the interface of equipment intended to be connected to an HBES/BACS network. It does not apply to interfaces to other networks. NOTE An example of other networks is a dedicated ICT network covered by CISPR 22 and 23. This document provides general performance requirements and test set-ups. This document is applicable (but not limited) to operator stations and other human–system interface devices, devices for management functions, control devices, automation stations and application-specific controllers, field devices and their interfaces, cabling and interconnection of devices, used within a dedicated HBES/BACS network.

Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-1: EMC requirements, conditions and test set-up

T/YIIEE 07-2021 直流接触器介电性能

目前GB 14048.1-2006、GB  14048.1-2012、GB/T 14048.10-2016、GB/T 14048.11-2016等国标对大部分参数做了相关要求。但部分 标准侧重于低压开关设备，对于直流接触器不太具备针对性，同时具体实施方法不够完善。本标准主要 是将直流接触器相关介电性能定义、基本要求、设计要求、检测测试要求进行明确细化规范，使其更具 有针对性、规范性、指导性。

Dielectic properties of DC contactors

GSO IEC 63044-5-3:2021 家庭和楼宇电子系统 (HBES) 以及楼宇自动化和控制系统 (BACS) 第5-3部分：工业环境中使用的 HBES/BACS 的 EMC 要求

IEC 63044-5-3:2017 is a product family standard that sets the minimum level of EMC performance for the HBES/BACS network in addition to the product EMC standards for HBES/BACS devices. It also applies to devices used within an HBES/BACS network for which no specific HBES/BACS product EMC standard exists. In addition, it defines EMC requirements for the interface of equipment intended to be connected to an HBES/BACS network. It does not apply to interfaces to other networks. NOTE An example of other networks is a dedicated ICT network covered by CISPR 22 and 23. This document specifies EMC requirements for HBES/BACS to be installed in industrial environments, according to the definition given in IEC 61000-6-2. NOTE Industrial environment covers the office spaces that may be present in industrial premises. Industrial automation systems are outside the scope. This document is applicable (but not limited) to operator stations and other human–system interface devices, devices for management functions, control devices, automation stations and application-specific controllers, field devices and their interfaces, cabling and interconnection of devices, used within a dedicated HBES/BACS network. This publication is to be read in conjunction with IEC 63044-5-1:2017.

Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-3: EMC requirements for HBES/BACS used in industrial environments

GSO IEC 63044-1:2021 家庭和楼宇电子系统 (HBES) 以及楼宇自动化和控制系统 (BACS) 第1部分：一般要求

IEC 63044-1:2017 applies to all Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) and specifies the general requirements for these systems and products. This document is applicable (but not limited) to operator stations and other human–system interface devices, devices for management functions, control devices, automation stations and application specific controllers, field devices and their interfaces, and cabling and interconnection of devices used within a dedicated HBES/BACS network. This document provides an overview of the IEC 63044 series. To enable integration of a wide spectrum of applications, the IEC 63044 series covers electrical safety, functional safety, environmental conditions, EMC requirements, and installation and cabling rules and topologies. IEC 63044 is a series of product family standards.

Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 1: General requirements

GSO IEC 63044-3:2021 家庭和楼宇电子系统 (HBES) 以及楼宇自动化和控制系统 (BACS) 第3部分：电气安全要求

IEC 63044-3:2017 provides the electrical safety requirements related to the HBES/BACS network in addition to the product safety standards for HBES/BACS devices. It also applies to devices used within an HBES/BACS network for which no specific HBES/BACS product safety standard exists. In addition, it defines safety requirements for the interface of equipment intended to be connected to an HBES/BACS network. It does not apply to interfaces to other networks. NOTE An example of other networks is a dedicated ICT network covered by IEC 62949. This document is applicable to operator stations and other human–system interface devices, devices for management functions, control devices, automation stations and application-specific controllers, field devices and their interfaces, and cabling and interconnection of devices used within a dedicated HBES/BACS network. This document covers the following requirements and compliance criteria: protection from hazards in the device; protection from overvoltages on the network; protection from touch current; protection from hazards caused by different types of circuit; protection of the communication wiring from overheating caused by excessive current.

Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 3: Electrical safety requirements

GSO IEC 63044-5-2:2021 家庭和楼宇电子系统 (HBES) 以及楼宇自动化和控制系统 (BACS) 第5-2部分：住宅、商业和轻工业环境中使用的 HBES/BACS 的 EMC 要求

IEC 63044-5-2:2017 is a product family standard that sets the minimum level of EMC performance for the HBES/BACS network in addition to the product EMC standards for HBES/BACS devices. It also applies to devices used within an HBES/BACS network for which no specific HBES/BACS product EMC standard exists. In addition, it defines EMC requirements for the interface of equipment intended to be connected to an HBES/BACS network. It does not apply to interfaces to other networks. NOTE An example of other networks is a dedicated ICT network covered by CISPR 22 and 23. This document specifies EMC requirements for HBES/BACS to be installed in residential, commercial and light-industrial environments, according to the definition given in IEC 61000-6-1. This document is applicable (but not limited) to operator stations and other human–system interface devices, devices for management functions, control devices, automation stations and application-specific controllers, field devices and their interfaces, cabling and interconnection of devices, used within a dedicated HBES/BACS network. This publication is to be read in conjunction with IEC 63044-5-1:2017.

Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-2: EMC requirements for HBES/BACS used in residential, commercial and light-industrial environments

DS/IEC TS 63236-1:2021 安装在数据中心和电信中心办公室的信息和通信技术（ICT）设备的直流（DC）设备耦合器 第1部分：2,6 kW 系统

Direct current (DC) appliance couplers for information and communication technology (ICT) equipment installed in data centres and telecom central offices – Part 1: 2,6 kW system

DS/IEC TS 63236-2:2021 安装在数据中心和电信中心办公室的信息和通信技术（ICT）设备的直流（DC）设备耦合器 第2部分：5,2 kW 系统

Direct current (DC) appliance couplers for information and communication technology (ICT) equipment installed in data centres and telecom central offices – Part 2: 5,2 kW system

DS/IEC TS 63236-3:2021 安装在数据中心和电信中心办公室的信息和通信技术（ICT）设备的直流（DC）设备耦合器 第3部分：AC/DC 设备入口

Direct current (DC) appliance couplers for information and communication technology (ICT) equipment installed in data centres and telecom central offices – Part 3: AC/DC appliance inlet

DS/EN 63044-1:2021 家庭和楼宇电子系统（HBES）和楼宇自动化和控制系统（BACS） 第1部分：一般要求

Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) – Part 1: General requirements

T/CEEIA 494-2021 绕组式永磁调速器技术条件 （机座号355～1 000）

本文件规定了绕组式永磁调速器的术语和定义、型式、基本参数和尺寸，技术要求，试验方法，检验规则以及标志、包装和保用期的要求。 本文件适用于负载为风机、水泵的绕组式永磁调速器（机座号355～1 000）（以下简称调速器）。凡属本系列调速器所派生的各种系列调速器也可参照执行。

Technical specifications for winding permanent magnet governors （Frame size 355～1 000）

IEC 63044-4:2021 家庭和楼宇电子系统（HBES）和楼宇自动化和控制系统（BACS） 第4部分：旨在集成到 HBES 和 BACS 中的产品的一般功能安全要求

This part of IEC 63044 provides the functional safety requirements for HBES/BACS. In addition, it defines functional safety requirements for the interface of equipment intended to be connected to an HBES/BACS network. It does not apply to interfaces to other networks. NOTE 1 An e

Home and building electronic systems (HBES) and building automation and control systems (BACS) - Part 4: General functional safety requirements for products intended to be integrated in HBES and BACS

IEC 63044-3:2021 家用和建筑电子系统(HBES)以及建筑自动控制系统(BACS). 第3部分: 电气安全要求

This part of IEC 63044 provides the electrical safety requirements related to the HBES/BACS network in addition to the product safety standards for HBES/BACS devices. It also applies to devices used within an HBES/BACS network for which no specific HBES/BACS product safety standa

Home and building electronic systems (HBES) and building automation and control systems (BACS) - Part 3: Electrical safety requirements

JIS C 8300 AMD 1:2021 接线装置的一般安全要求(修改件1)

General safety requirements for wiring devices (Amendment 1)

JIS C 8300:2019 布线装置的一般安全要求

General safety requirements for wiring devices