29.120.01 电工器件综合 标准查询与下载

GB/T 14048.1-2000 低压开关设备和控制设备 总则

本标准适用于（当有关产品标准有要求时）开关设备和控制设备（以下简称“电器”），该电器用于连接额定电压交流不超过1000 V或直流不超过 1500 V的电路。 本标准不适用于 GB 7251规定的低压成套开关设备和控制设备。

Low-voltage switchgear and controlgear. General rules

GB 17466-1998 家用和类似用途固定式电气装置电器附件外壳的通用要求

本标准适用于户内或户外使用的额定电压不超过440V的家用和类似用途固定式电器装置的电器附件外壳或外壳部件。 注：本标准可用作额定电压不超过1000V的外壳的导则。符合本标准要求的外壳，适合于通常不超过35℃，偶尔会达到40℃］的环境温度下使用。 本标准中所指的外壳，包括TC23范围内的电器附件所装的明装式、暗装式和半暗装式安装盒的盖或盖板，这些盖或盖板可以是，也可以不是电器附件的一部分。本标准不适用于IECSC17D（开关设备和控制设备）范围内的装有过电流保护装置的组合装置的外壳，亦不适用于汇流条线槽型的外壳。本标准亦适用于以安装或悬吊照明设备用的安装盒。 本标准原只用于IECTC23范围内的电器附件外壳，亦可供其他TC和SC参考。外壳中，凡成为某电器附件不可分割的一部分并能为该附件提供对外部影响（例如机械冲击、固体物质或水的入侵等）的防护者，应符合该附件有关标准的要求。

General requirements for enclosures for accessories for household and similar fixed electrical installations

T/QGCML 3934-2024 电磁起动器综合保护器

本文件规定了电磁起动器综合保护器（以下简称“保护器”）的术语及定义、技术要求、试验方法、检验规则、标志、标签、使用说明书、包装、运输及贮存。 本文件适用于电磁起动器综合保护器的设计、生产、检验和使用。

Electromagnetic starter comprehensive protector

T/ZJDJ 014-2024 电气安全智能保护装置

1  范围　1 2  规范性引用文件　1 3  术语和定义　1 4  产品组成及基本参数　1 4.1  产品组成　1 装置主要由电流传感器、温度传感器、主机、操作显示模块组成。　1 4.2  基本参数　1 5  使用环境条件　2 5.1  正常工作条件　2 5.2  其它要求　2 6  技术要求　2 6.1  外观及结构要求　2 6.2  热性能要求　2 6.3  动稳定极限值　3 6.4  功率消耗　3 6.5  智能功能　3 6.6  电气安全性能　5 6.7  触点性能　5 6.8  电磁兼容要求　5 7  试验方法　7 7.1  试验条件　7 7.2  外观及结构检查　7 7.3  热性能试验　7 7.4  动稳定极限值　7 7.5  功率消耗　7 7.6  智能功能　7 7.7  电气安全性能　7 7.8  触点性能　8 7.9  电磁兼容试验　8 8  检验规则　9 8.1  检验分类　9 8.2  例行检验　9 8.3  出厂检验　9 8.4  型式检验　9 9  标志、标签、使用说明书　10

Electrical safety intelligent protection devices

GSO IEC TR 63044-2:2024 家庭和楼宇电子系统 (HBES) 以及楼宇自动化和控制系统 (BACS) 第2部分：环境条件

IEC TR 63044-2:2022(E) provides the environmental conditions for HBES/BACS devices, when declared in the manufacturer's documentation for use in one or more of the environment classes as defined in Clause 6 of this document.

Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 2: Environmental conditions

GSO IEC 63044-6:2024 家庭和楼宇电子系统 (HBES) 以及楼宇自动化和控制系统 (BACS) 第6部分：规划和安装要求

IEC 63044-6:2021 specifies the requirements for planning and installation of HBES/BACS and the supporting infrastructure. Radio frequency (RF) HBES/BACS are also considered. Safety requirements are covered by IEC 60364 (all parts). Information and communication technology (ICT) and broadcasting and communication technology (BCT) network installations are typically interfaced with HBES/BACS. The requirements for ICT and BCT network installations are covered by ISO/IEC 14763-2. This document does not cover HBES/BACS implementation with: - optical fibre, - power lines, - power over Ethernet (PoE).

Home and building electronic systems (HBES) and building automation and control systems (BACS) - Part 6: Requirements for planning and installation

GSO IEC 63044-4:2024 家庭和楼宇电子系统 (HBES) 以及楼宇自动化和控制系统 (BACS) 第4部分：拟集成到 HBES 和 BACS 中的产品的一般功能安全要求

IEC 63044-4:2021 provides the functional safety requirements for HBES/BACS. In addition, it defines functional safety requirements for the interface of equipment intended to be connected to an HBES/BACS network. It does not apply to interfaces to other networks. This document does not provide functional safety requirements for safety-related systems. This document does not provide requirements on data protection and security.

Home and building electronic systems (HBES) and building automation and control systems (BACS) - Part 4: General functional safety requirements for products intended to be integrated in HBES and BACS

T/CIET 270-2023 家居用智能传感器安全技术要求

本文件规定了家居用智能传感器安全技术要求的术语与定义、一般构成、特性、智能分类、一般要求、安全技术要求。 本文件适用于家居用智能传感器的安全技术要求。

Safety technical requirements for smart sensors for household use

T/CEEIA 715-2023 矿物质火山岩浇注耐火母线槽

本文件规定了矿物质火山岩浇注耐火母线槽的要求、试验方法、检验规则、标志、包装、运输、贮存。  本文件适用于额定电压至1 000 V（1 140 V），额定电流至8 000 A的矿物质火山岩浇注耐火母线槽。

Mineral volcanic rock cast fire-resistant busways

IEC 60335-2-97:2023 PRV

T/CASME 659-2023 静音端子机

本文件规定了静音端子机的组成、使用条件、要求、试验方法、检验规则及标志、包装、运输和贮存。

Mute terminal crimping machine

NB/T 11228-2023 风力发电机组电控产品结构设计规范

Structural design specifications for electronic control products for wind turbines

NB/T 11231-2023 风力发电机组主控制系统可靠性技术规范

Reliability Technical Specifications for Main Control Systems of Wind Turbine Generators

NB/T 31044-2023 永磁风力发电机-变流器组技术规范

Permanent magnet wind turbine-converter set technical specifications

T/QGCML 830-2023 插入式可预置内连接电表箱

本文件规定了插入式可预置内连接电表箱的术语和定义、使用环境、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于插入式可预置内连接电表箱。

Plug-in pre-connectable meter box

EN IEC 60335-2-97:2023 家用和类似用途电器 安全 第 2-97 部分：百叶窗、遮阳篷、百叶窗和类似设备的驱动器的特殊要求

IEC 60335-2-97:2016 deals with the safety of electric drives for shutters, blinds and awnings, intended for household and similar purposes, their rated voltage being not more than 250 V for single-phase drives and 480 V for other drives. Battery-operated drives and other d.c. supplied drives are within the scope of this standard. Examples of equipment that can be driven are: - spring controlled folding arm awnings; - curtains; - grilles covering doors and windows; - projection screens; - shutters covering doors and windows and draperies. Drives may be supplied with a driven part. Drives not intended for normal household use but that nevertheless may be a source of danger to the public, such as drives intended to be used by laymen in shops, in light industry, on farms and on industrial premises, are within the scope of this standard. Attention is drawn to the fact that for drives intended to be used in vehicles or on board ships or aircraft, additional requirements may be necessary. This standard does not apply to - drives intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas); - drives for vertically moving garage doors for residential use (IEC 60335-2-95); - drives for rolling doors (IEC 60335-2-103); - drives used in premises such as hangars or in heavy industry and drives for theatre curtains. As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by all persons in and around the home. However, in general, it does not take into account: - persons (including children) whose physical, sensory or mental capabilities or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction or - children playing with the appliance. This third edition cancels and replaces the second edition published in 2002 including its Amendment 1 (2004) and its Amendment 2 (2008). It constitutes a technical revision. The principal changes in this edition as compared with the second edition of IEC 60335-2-97 are as follows (minor changes are not listed): - Deleted "rolling" from the title and modified the scope to cover appliance types other than shutters, awnings, and blinds that are operated in a rolling way; - Revised 19.13 to allow drives to obtain a safe position; - Added 19.101 to provide a new abnormal test for drives with rated operating time; - Added 20.104.4 to establish a test intended to cover horizontal movement (non-rolling) drive parts; - Added 20.104.5 to provide an additional test to cover rolling grills to address the risk of being lifted; - Modified 22.46 and Annex R to introduce software requirements for programmable electronic circuits used to comply with Clause 20; - Added 22.101 to introduce a requirement to prevent inadvertent adjustments that would lead to unsafe application of drives; - Added examples of swing shutters and sliding shutters in Figure 101. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this standard be adopted for implementation nationally not earlier than 12 months or later than 36 months from the date

Household and similar electrical appliances - Safety - Part 2-97: Particular requirements for drives for shutters, awnings, blinds and similar equipment

T/YIIEE 02-2023 40.5KV 户外交流高压隔离开关

本文件适用于额定电压 40.5kV，额定频率 50Hz/60Hz 的隔离开关，用于电力系统中线路及户外变压。

40.5K outdoor AC high voltage isolation switch

T/YIIEE 01-2023 24kV 户外交流高压跌落式熔断器

本标准适用于额定电压 24 kV，额定频率 50/60 Hz的熔断器，用于电力系统中线路及户外变压器等设备的保护。

24kV outdoor AC high voltage drop type fuse

T/CEEIA 673-2023 高压开关设备和控制设备生产企业 温室气体排放核算方法

本文件规定了高压开关设备和控制设备生产企业温室气体排放核算基本原则，温室气体排放核算流程、温室气体排放核算系统边界、温室气体排放核算、温室气体排放核算工作质量保证、温室气体排放核算报告等内容。 本文件适用于3.6 kV及以上高压开关设备和控制设备生产企业的温室气体排放核算。 注：高压开关设备和控制设备生产企业温室气体排放量不建议单独使用，宜同时给出生产企业的占地面积、容积率、产值等其他数据。

High-voltage switchgear and controlgear manufacturer—greenhouse gases emission accounting method

T/CEEIA 672-2023 电工行业产品碳足迹评价导则 高压开关设备和控制设备

本文件规定了高压开关设备和控制设备碳足迹评价原则、碳足迹评价计算、碳足迹评价和碳足迹评价报告。 本文件适用于3.6 kV及以上高压开关设备和控制设备的碳足迹评价。

Guidelines for carbon footprint assessment of products in the electrical industry—High voltage switchgear and controlgear