29.280 电力牵引设备 标准查询与下载
共找到 676 条与 电力牵引设备 相关的标准，共 46 页
Railway power substation integrated automation system device
- ICS
- 29.280
- CCS
- S 81
- 发布
- 2018-07-16
- 实施
- 2019-02-01
This European Standard defines the process, protective measures and demonstration of safety in accordance with EN 50126 for the conventional electric traction system of railways applications. The standard can also apply to guided mass transport systems and trolleybus systems. All these systems can be elevated, at-grade and underground.
Railway applications - Fixed installations - Process, protective measures and demonstration of safety for electric traction systems; German version EN 50562:2018
- ICS
- 29.280
- CCS
- 发布
- 2018-04-01
- 实施
- 2018-04-01
Railway applications - Fixed installations - Process@ protective measures and demonstration of safety for electric traction systems
- ICS
- 29.280
- CCS
- 发布
- 2018-01-01
- 实施
Railway Applications - The Specification and Demonstration of Reliability@ Availability@ Maintainability and Safety (RAMS) - Part 1: Generic RAMS Process
- ICS
- 29.280
- CCS
- 发布
- 2017-10-01
- 实施
本标准规定了城市轨道交通接触网系统维护与检修的术语、总体要求、接触网巡视与检测、接触网小修的技术规范。 本标准适用于时速不大于100km/h、DC1500V钢轮钢轨制式的城市地铁与轻轨接触网系统维护与检修。
Technical Specifications for Maintenance and Overhaul of Urban Rail Transit Catenary System
- ICS
- 29.280
- CCS
- S80
- 发布
- 2017-07-01
- 实施
- 2017-08-01
TB/T 1484的本部分规定了机车车辆用额定电压30 kV单相电力电缆的结构与代号、使用条件、技术要求、检验方法、检验规则、标志、包装、运输和储存。 本部分适用于机车车辆(含动车组)用额定电压30 kV单相电力电缆。
Specification for cables on board rolling stock.Part 2: 30 kV single phase power cables
- ICS
- 29.280
- CCS
- S35
- 发布
- 2017-06-05
- 实施
- 2018-01-01
TB/T 1484的本部分规定了额定电压3.6 kV及以下的机车车辆用动力和控制电缆的分类、代号、规格、结构、技术要求、检验方法、检验规则、标志、包装、运输和储存。 本部分适用于额定电压3.6 kV及以下的机车车辆(含动车组)用动力和控制电缆，其他轨道车辆可参照执行。
Specification for cables on board rolling stock.Part 1: Power and control cables
- ICS
- 29.280
- CCS
- S35
- 发布
- 2017-06-05
- 实施
- 2018-01-01
TB/T 1484的本部分规定了机车车辆列车通信网络(TCN)用通信电缆的使用条件、分类、代号、规格、结构、技术要求、检验方法、检验规则、标志、包装、运输和储存。 本部分适用于机车车辆用TCN网络通信电缆，其他城轨车辆可参照执行。
Specification for cables on board rolling stock.Part 3: Cables for communication networks
- ICS
- 29.280
- CCS
- S35
- 发布
- 2017-06-05
- 实施
- 2018-01-01
本标准规定了机车车辆车顶支柱绝缘子的分类和型号、环境条件、技术要求、试验、标志、包装和储存。 本标准适用于标称电压25 kV交流牵引系统电力机车和电动车组车顶受电弓和母线支持用户外支柱绝缘子(以下简称绝缘子)。其他形式的车顶绝缘子可参照执行。
Post insulators on board of rolling stock
- ICS
- 29.280
- CCS
- S41
- 发布
- 2017-05-06
- 实施
- 2017-12-01
1.1 This specification covers round, grooved, and figure-9 deep-section grooved bronze trolley wire. 1.2 The bronze trolley wire may be made in any of the three distinct alloys indicated in accordance with their increasing conductivities: Alloy 40, Alloy 55, Alloy 80. 1.3 The values stated in inch-pound units are to be regarded as the standard. The metric equivalents of inch-pound units given in this standard may be approximate. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Specification for Bronze Trolley Wire
- ICS
- 29.280
- CCS
- 发布
- 2017-04-01
- 实施
1.1 This specification covers round and grooved hard-drawn copper and silver-bearing copper trolley wire. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Specification for Copper Trolley Wire
- ICS
- 29.280
- CCS
- 发布
- 2017-04-01
- 实施
Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus
- ICS
- 29.280
- CCS
- 发布
- 2017-03-01
- 实施
Railway applications - Fixed installations - Protection principles for AC and DC electric traction systems; German version EN 50633:2016
- ICS
- 29.280
- CCS
- S80
- 发布
- 2017-03
- 实施
Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 3-1: Measurement@ control and protection devices for specific use in a.c. traction systems - Devices
- ICS
- 29.280
- CCS
- 发布
- 2017-02-01
- 实施
Railway applications - Electromagnetic compatibility - Part 1: General
- ICS
- 29.280
- CCS
- 发布
- 2017-01-01
- 实施
The railway track power supply systems. The methods of selecting fundamental parameters
- ICS
- 29.280
- CCS
- 发布
- 2017-00-00
- 实施
- 2018-05-01
TB/T 1842的本部分规定了受电弓碳滑板的技术要求、检验方法、检验规则、标志、包装、运输和储存。 本部分适用于机车车辆受电弓使用的碳滑板。
Pantograph strip.Part 3: carbon contact strip
- ICS
- 29.280
- CCS
- S35
- 发布
- 2016-12-15
- 实施
- 2017-07-01
TB/T 1842的本部分规定了受电弓碳基复合材料滑板的技术要求、检验方法、检验规则、标志、包装、运输和储存。 本部分适用于机车车辆受电弓用碳基复合材料滑板。
Pantograph strip.Part 2: carbon matrix composite materials strip
- ICS
- 29.280
- CCS
- S35
- 发布
- 2016-12-15
- 实施
- 2017-07-01
本标准规定了机车车辆霍尔式速度传感器的使用条件、主要参数、基本要求、技术要求、检验规则、检验方法、标志、包装、运输和贮存、质量承诺。 本标准适用于信号输出类型为电压型输出的机车车辆霍尔式速度传感器（以下简称“传感器”），其他类型霍尔式速度传感器可参照本标准执行。
Hall effect speed sensor for rolling stock
- ICS
- 29.280
- CCS
- C3713
- 发布
- 2016-12-01
- 实施
- 2017-03-06
Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus
- ICS
- 29.280
- CCS
- 发布
- 2016-12-01
- 实施
