29.280 电力牵引设备 标准查询与下载
共找到 676 条与 电力牵引设备 相关的标准，共 46 页
Electrified Railway Catenary Components Part 6: Central Anchor Device
- ICS
- 29.280
- CCS
- S82
- 发布
- 2020-10-30
- 实施
- 2021-05-01
Electrified Railway Catenary Components Part 14: Spring Compensation Device
- ICS
- 29.280
- CCS
- S82
- 发布
- 2020-10-30
- 实施
- 2021-05-01
Electrified Railway Catenary Components Part 7: Integral Suspension Strings and Suspension String Clamps
- ICS
- 29.280
- CCS
- S82
- 发布
- 2020-10-30
- 实施
- 2021-05-01
本标准规定了交流电气化铁路同相供电装置（以下简称装置）的术语和定义、一般规定、环境条件、设计与制造、功能与性能、安全以及包装、运输、贮存。 本标准规定的交流电气化铁路同相供电装置适用于高速铁路、重载铁路、普速铁路、城际铁路、市域铁路、城市轨道、山地轨道等。
Technical specifications for the same-phase power supply device for AC electrified railways
- ICS
- 29.280
- CCS
- S 81
- 发布
- 2020-10-21
- 实施
- 2020-12-01
本文件 规定了中低速磁浮交通接触轨系统的术语和定义 、技术要求、检验项目、 检验规则、标志、包装、运输、贮存、质量保证等。 本文件适用于时速120km/h以下、侧部授流中低速磁浮交通接触轨系统的设计、制造、检验 ，其他授流模式接触轨系统可参考使用 。
Technical specification for contact rail system of middle and low speed maglev transit
- ICS
- 29.280
- CCS
- G541
- 发布
- 2020-09-29
- 实施
- 2021-03-26
Prestressed concrete pillars for electrified railway catenary
- ICS
- 29.280
- CCS
- S 82
- 发布
- 2020-09-01
- 实施
- 2021-03-01
本文件规定了高压链式静止无功发生器设计、制造、储运、安装、调试验收等过程与质量有关的监理相关方基本要求、监理服务的实现、监理建筑信息模型（BIM）管理、监理服务质量评价与改进。
Supervision specification-High voltage dhain circuit-Static var generator
- ICS
- 29.280
- CCS
- D4420
- 发布
- 2020-08-01
- 实施
- 2020-08-19
Urban rail transit catenary (rail) operation and maintenance regulations
- ICS
- 29.280
- CCS
- S80
- 发布
- 2020-07-13
- 实施
- 2020-07-30
Railway applications — Fixed installations —Electric traction overhead contact lines
- ICS
- 29.280
- CCS
- 发布
- 2020-07-10
- 实施
Railway applications — Fixed installations —Electric traction overhead contact lines
- ICS
- 29.280
- CCS
- 发布
- 2020-07-10
- 实施
Railway applications — Supply voltages of traction systems
- ICS
- 29.280
- CCS
- 发布
- 2020-07-10
- 实施
Railway applications — Supply voltages of traction systems
- ICS
- 29.280
- CCS
- 发布
- 2020-07-10
- 实施
Intercity railway platform door system
- ICS
- 29.280
- CCS
- S 35
- 发布
- 2020-05-29
- 实施
- 2020-12-01
本标准规定了电动汽车充电桩的安全标准、充电站在使用或维护过程中的安全要求。
Electric Vehicle AC Charging Pile Safety Management Specifications
- ICS
- 29.280
- CCS
- C382
- 发布
- 2020-05-15
- 实施
- 2020-05-26
本标准规定了大功率一体化直流充电桩额定参数、技术条件、试验方法及标志、包装、运输、储存等。
Integrated DC charging pile technical parameter standard
- ICS
- 29.280
- CCS
- C382
- 发布
- 2020-05-15
- 实施
- 2020-05-26
本规范适用于充电桩施工的通用安全技术标准，对充电桩在施工过程中的现场环境保护、场地勘测、施工要求、安全防护等级提出通用安全要求。
Construction Safety Standards for Charging Pile
- ICS
- 29.280
- CCS
- C356
- 发布
- 2020-05-15
- 实施
- 2020-05-26
本规范从充电桩的巡检、维护和操作三方面进行定义，对充电桩在巡检、维护及操作提出通用要求。
Charging pile daily inspection and maintenance standards
- ICS
- 29.280
- CCS
- C356
- 发布
- 2020-05-15
- 实施
- 2020-05-26
本标准规定了落地式交流充电桩的通用要求、功能定义、形式结构、功能参数、认证方式等。
General technical standard for floor-mounted single-gun AC charging piles
- ICS
- 29.280
- CCS
- C382
- 发布
- 2020-05-15
- 实施
- 2020-05-26
What is BS EN 50641 about? BS EN 50641 specifies requirements for the acceptance of simulation tools used for the assessment of the design of electric traction power supply systems with respect to TSI Energy. BS EN 50641 is applicable to the simulation of AC and DC electric traction power supply systems, in the frame of assessment required by Directive (EU) 2016/797. BS EN 50641 provides all requirements necessary to demonstrate that a simulation tool may be used for the purposes of TSI approval of electric traction power supply systems. BS EN 50641 focuses on the core simulation functions comprising the equations and functions which calculate the mechanical movement of trains and also which calculate the load flow of the electrical traction power supply system. NOTE: BS EN 50641 only applies to the simulation of electric traction power supply system characteristics at their nominal frequency for AC or DC systems. NOTE: BS EN 50641 does not deal with the validation of simulation tools by measurement. NOTE: BS EN 50641 does not consider harmonic studies, electrical safety studies (e.g. rail potential), short circuit or electromagnetic compatibility studies over a wide frequency spectrum and does not mandate the use of a particular simulation tool in order to validate the design of an electric traction power supply system.
Railway applications. Fixed installations. Requirements for the validation of simulation tools used for the design of electric traction power supply systems
- ICS
- 29.280
- CCS
- 发布
- 2020-01-31
- 实施
- 2020-01-31
This document specifies requirements for the acceptance of simulation tools used for the assessment of design of electric traction power supply systems with respect to TSI Energy. This document is applicable to the simulation of AC and DC electric traction power supply systems, in the frame of assessment required by Directive (EU) 2016/797. The methods and parameters defined in this document are only intended for use in the design of the electric traction power supply system, and hence this document solely considers validation of tools within the TSI energy subsystem for all envisaged railway networks. This document does not deal with validation of simulation tools by measurement. This document focuses on the core simulation functions comprising the equations and functions which calculate the mechanical movement of trains and also which calculate the load flow of the electrical traction power supply system. In doing so this document provides all requirements necessary to demonstrate that a simulation tool may be used for the purposes of TSI approval of electric traction power supply systems. Any simulation tool which meets the acceptance requirements of the test cases in this document can be used to determine TSI compatibility for all systems of the same voltage and frequency without any requirement for further validation as part of the TSI assessment process. This document includes controls for the modification of simulation tools, in particular the limits of applicability of certification when tools are modified. These controls focus on determining whether the core functions of the simulation model are modified. This document provides only the requirements for demonstration of the algorithms and calculations of core functions. The use of a certified simulation tool in accordance with this document does not, in itself, demonstrate good practice in electric traction power supply system design, neither does it guarantee that the simulation models and data for infrastructure or trains used in the tool are correct for a given application. The choice and application of any models and data, of individual system components, in a design is therefore subject to additional verification processes and not in the Scope of this document. Competent development of design models and full understanding of the limits of design tools remain requirements in any system design. This document does not reduce any element of the need for competent designers to lead the design process. The test cases and data shown in Clause 6 in this document do not represent an existing network, but these data are used as theoretical/virtual network only for the purpose of verification of the core functionality. NOTE A new test case will be drafted considering metro, tramways and trolleybuses using DC 600 V or DC 750 V. Until this test case is available, this document can also be applied to subway, tram and trolley bus systems. This test case will also integrate rail systems using DC 750 V. Additionally, the application of this document ensures that the output data of different simulation tools are consistent when they are using the same set of input data listed in Clause 6. This document only applies to the simulation of electric traction power supply systems characteristics at their nominal frequency for AC or DC systems. It does not consider harmonic studies, electrical safety studies (e.g. rail potential), short circuit or electromagnetic compatibility studies over a wide frequency spectrum. This document does not mandate the use of a particular simulation tool in order to validate the design of an electric traction power supply system. This document does not consider complex models with active components such as static frequency convertors.
Railway applications - Fixed installations - Requirements for the validation of simulation tools used for the design of electric traction power supply systems
- ICS
- 29.280
- CCS
- 发布
- 2020-01-10
- 实施
- 2020-05-04 (7)
