31.220.10 插头和插座装置、连接器 标准查询与下载

DIN EN 60512-29-100:2016 电子设备连接器.试验和测量.第29-100部分:M12类连接器500 MHz以下的信号完整性试验. 试验29a至29g(IEC 60512-29-100-2015).德文版本EN 60512-29-100-2015

Connectors for electronic equipment - Tests and measurements - Part 29-100: Signal integrity tests up to 500 MHz on M12 style connectors - Tests 29a to 29g (IEC 60512-29-100:2015); German version EN 60512-29-100:2015

SJ/T 10495-2016 频率低于3MHZ的印制板用连接器 第11部分：同轴连接器（自由连接器和固定连接器尺寸）详细规范

Connectors for printed boards with frequencies below 3 MHZ Part 11: Detailed specifications for coaxial connectors (free connectors and fixed connector dimensions)

GOST R IEC 60268-11-2016 音响系统设备. 第11部分. 音响系统组件互连的连接器应用

Sound system equipment. Part 11. Application of connectors for the interconnection of sound system components

ASTM B1004-16 电气连接系统接触性能分类的标准实施规程

5.1 This practice is based on the use of electrical resistance as an indicator of contact performance. This is the fundamental physical attribute that reflects the condition of the electrical contact interface(s) within a connection. For practical current-carrying electrical connections, resistance may be calculated from potential drop measurements, as described, for example, in Test Method B539 and B812. 5.2 This practice accommodates the use of multiple test methods, as may be required to predict performance in a given application. 5.3 This practice applies only to the performance of the current-carrying contact interface(s). It does not characterize the performance of insulating materials or other components of a complete connection system. 5.4 Specifiers may use the performance classification as a requirement for a given application. 5.5 Manufacturers may use the performance classification to reflect the relative quality of their products. 1.1 This practice provides a method of specifying performance requirements for (or reporting test results of) electrical contact and connection systems. Both conductor and connector system performance may be specified by this practice, separately or in combination. 1.2 This practice may be used for separable or permanent contacts employing metallic conducting components. 1.3 This practice is applicable to both signal and power applications. 1.4 This practice is intended to be used for specifying performance of connectors and connection systems that are marketed for general public and trade application, as for instance for use in building wiring, electronics, and vehicles. 1.5 This practice is not intended to be used to specifying the performance of connection systems for specialized applications, such as military, industrial, aircraft, power distribution, and medical apparatus. 1.6 This practice does not specify the sample preparation or test sequences required for determining contact performance. It is the responsibility of the user of this practice to determine the applied test sequence(s) appropriate for the application. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Safety Data Sheet (SDS) for this product/material as provide by the manufacturer, to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Contact Performance Classification of Electrical Connection Systems

GOST IEC 61984-2016 连接器. 安全要求和试验

Connectors. Safety requirements and tests

IEC 60603-7-81:2015 电子设备用连接器第7-81部分:8路 屏蔽 自由和固定连接器的详细规范 用于频率高达2 000 MHz的数据传输

This part of IEC 60603 covers 8-way@ shielded@ free and fixed connectors@ references dimensional@ mechanical@ electrical and environmental characteristics and tests in IEC 60603-7@ and specifies electrical transmission requirements@ including power sum alien (exogenous) crosstalk@ for frequencies up to 2 000 MHz. These connectors are typically used as ??category 8.1?? connectors in ??class I?? cabling systems specified in ISO/IEC 11801. These connectors are intermateable and interoperable with other IEC 60603-7 series connectors as defined in Clause 2 of IEC 60603-7. These connectors are backward compatible with other IEC 60603-7 series connectors@ except IEC 60603-7-7 and IEC 60603-7-71 connectors. NOTE Transmission performance categories: in this IEC standard@ the term ??category??@ when used in reference to transmission performance@ refers to those categories defined by ISO/IEC 11801.

Connectors for electronic equipment - Part 7-81: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 2 000 MHz

IEC 61076-4-116:2012+AMD1:2015 CSV 电子设备用连接器 产品要求 第2部分 4-116 印制电路板连接器 连接器的详细规范 具有集成屏蔽功能的高速两件式连接器

Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function

IEC 61076-4-116:2012/AMD1:2015 电子设备用连接器 产品要求 第2部分 4-116 印制电路板连接器 连接器的详细规范 具有集成屏蔽功能的高速两件式连接器

Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function

JIS C 5402-13-1:2015 电子设备连接器.试验和测量.第13-1部分:机械操作试验.试验13a:啮合力及离散力

Connectors for electronic equipment -- Tests and measurements -- Part 13-1: Mechanical operation tests -- Test 13a: Engaging and separating forces

JIS C 5401-1:2015 电子设备连接器.产品要求.第1部分:总规范

Connectors for electronic equipment -- Product requirements -- Part 1: Generic specification

IEC 61076-4-116:2015 电子设备连接器.产品要求.第4-116部分:印刷电路板用连接器.带集成屏蔽功能的高速两部分连接器详细规格

This International Standard establishes specifications and test requirements for a high-speed two-part connector with integrated shielding function for use as a printed board connector in industrial environments. The connectors connect a backplane to printed boards.

Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function

EN 60512-29-100:2015 电子设备连接器 测试和测量 第 29-100 部分：M12 型连接器上高达 500 MHz 的信号完整性测试 测试 29a 至 29g

IEC 60512-29-100:2015 specifies the test methods for transmission performance for M12-style connectors up to 500 MHz. It is also suitable for testing lower frequency connectors if they meet the requirements of the detail specifications and of this standard. The test methods provided herein are: - insertion loss, test 29a; - return loss, test 29b; - near-end crosstalk (NEXT) test 29c; - far-end crosstalk (FEXT), test 29d; - transverse conversion loss (TCL), test 29f; - transverse conversion transfer loss (TCTL), test 29g. For the transfer impedance (ZT) test, see IEC 60512-26-100, test 26e. For the coupling attenuation see ISO/IEC 11801. All test methods apply for two and four pair connectors. Key words: Connectors, Signal Integrity, M12 Style Connector

Connectors for electronic equipment - Tests and measurements - Part 29-100: Signal integrity tests up to 500 MHz on M12 style connectors - Tests 29a to 29g

GSO IEC 60512-16-4:2015 电子设备连接器 测试和测量 第16-4部分：触点和端子的机械测试 测试 16d：拉伸强度（压接连接）

This part of IEC 60512, when required by the detail specification, is used for testing connectors within the scope of technical committee 48. It may also be used for similar devices when specified in a detail specification. The object of this part of IEC 60512 is to detail a standard test method to determine the tensile strength of a crimped connection.

Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections)

GSO IEC 60512-25-1:2015 电子设备连接器 测试和测量 第25-1部分：测试 25a 串扰比

This part of IEC 60512 applies to interconnect assemblies, such as electrical connectors, sockets and cable assemblies. This standard describes test procedures for measuring the magnitude of the electric and magnetic coupling between driven and quiet lines of an interconnect assembly. Both time domain (method A) and frequency domain methods (method B) for single-ended and differential transmission are described. Insertion and reference fixture techniques are also described.

Connectors for electronic equipment - Tests and measurements - Part 25-1: Test 25a - Crosstalk ratio

GSO IEC 60512-16-16:2015 电子设备连接器 测试和测量 第16-16部分：触点和端子的机械测试 测试 16p：扭转强度 固定公接头

This part of IEC 60512, when required by the detail specification, is used for testing electomechanical components within the scope of IEC technical committee 48. It may also be used for similar devices when specified in a detail specification. The object of this part of IEC 60512 is to detail a standard test method to determine the ability of a fixed male tab and its fixing to withstand a specified torque. If so specified in the detail specification, forces other than torsional may be applied.

Connectors for electronic equipment - Tests and measurements - Part 16-16: Mechanical tests on contacts and terminations - Test 16p: Torsional strength, fixed male tabs

GSO IEC 60603-7-7:2015 电子设备连接器 第7-7部分：用于频率高达 600 MHz 的数据传输的 8 路、屏蔽、自由和固定连接器的详细规范

This part of IEC 60603 covers 8-way, shielded, free and fixed connectors, references dimensional, mechanical, electrical and environmental characteristics and tests in IEC 60603-7 and IEC 60603-7-1, and specifies electrical transmission requirements for frequencies up to 600 MHz. These connectors are typically used as category 7 connectors in class F cabling systems specified in ISO/IEC 11801. These connectors are intermateable and interoperable with other IEC 60603-7 series connectors as defined in Clause 2 of IEC 60603-7-1,

Connectors for electronic equipment - Part 7-7: Detail specification for 8-way, shielded, free and fixed connectors for data transmission with frequencies up to 600 MHz

GSO IEC 61076-3-117:2015 电子设备连接器 产品要求 第3-117部分：矩形连接器 与工业环境中的 8 路屏蔽和非屏蔽连接器一起使用的保护外壳详细规范 符合 IEC 60603-7

This part of IEC 61076 covers rectangular protective housings with push-pull coupling for upgrading existing 8-way shielded and unshielded connectors utilizing the interface described in IEC 60603-7-2, IEC 60603-7-3, IEC 60603-7-4, IEC 60603-7-41, IEC 60603-7-5, IEC 60603-7-51, IEC 60603-7-7 and IEC 60603-7-71 to IP65 and IP67 ratings according to IEC 60529, for use in industrial environments. Common mating configurations for all variants of the 8-way shielded and unshielded connectors are defined in IEC 60603-7. The mating dimensions for the housings under Clause 3 allow the mating conditions under IEC 60603-7 to be fulfilled. This standard covers a further variant of IEC 61076-3-106 housing known as variant 14. The fully assembled variant 14 connectors described in this document incorporate fixed and free connectors which are fully compliant which the relevant part of IEC 60603-7.

Connectors for electronic equipment - Product requirements - Part 3-117: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7

GSO IEC 60512-12-3:2015 电子设备连接器 测试和测量 第12-3部分：焊接测试 测试 12c：可焊性、去湿性

This part of IEC 60512, when required by the detail specification, is used for testing connectors within the scope of IEC technical committee 48. It may also be used for similar devices when specified in a detail specification. The object of this part of IEC 60512 is to define a standard test method to assess the ability of the terminations of a connector to remain covered with solder when being brought into contact with molten solder under specified conditions.

Connectors for electronic equipment - Tests and measurements - Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting

GSO IEC 60512-25-2:2015 电子设备连接器 测试和测量 第25-2部分：测试 25b 衰减（插入损耗）

This part of IEC 60512 is applicable to electrical connectors, sockets, cable assemblies or interconnection systems. This standard describes a frequency and a time domain method to measure attenuation/ insertion loss as a function of frequency. NOTE “Attenuation” is referenced throughout the document. Test professionals must use the appropriate term (attenuation or insertion loss) when summarizing and reporting the test measurements according to the type of specimen and transmission line being measured.

Connectors for electronic equipment - Tests and measurements - Part 25-2: Test 25b - Attenuation (insertion loss)

GSO IEC 60512-5-1:2015 电子设备连接器 测试和测量 第5-1部分：载流能力测试 测试 5a：温升

This part of IEC 60512, when required by the detail specification, is used for testing electromechanical components within the scope of IEC technical committee 48. This test may also be used for similar devices when specified in a detail specification. The object of this test is to detail a standard test method to assess the ability of a component to carry its specified current, at room temperature, without exceeding a specified temperature rise.

Connectors for electronic equipment - Tests and measurements - Part 5-1: Current-carrying capacity tests - Test 5a: Temperature rise