31.220.10 插头和插座装置、连接器 标准查询与下载

EN 60603-7-82:2016 电子设备连接器 第 7-82 部分：8 路、12 触点、屏蔽、自由和固定连接器的详细规范，用于频率高达 2000 MHz 的数据传输

IEC 60603-7-82:2016 covers 8-way, 12 contacts, shielded, free and fixed connectors, references dimensional, mechanical, electrical and environmental characteristics and tests in IEC 60603-7-7, and specifies electrical transmission requirements, including power sum alien (exogenous) crosstalk, for frequencies up to 2 000 MHz. These connectors are typically used as "category 8.2" connectors in "class II" cabling systems specified in ISO/IEC TR 11801-9901 and specified in ISO/IEC 11801-1. These connectors are intermateable and interoperable with other IEC 60603-7 series connectors, i.e. as defined in IEC 60603-7-7 and IEC 60603-7-1. These connectors are backward compatible with other IEC 60603-7 series connectors. Key words: Connectors, 8-way. Shielded Free and Fixed, Data Transmission

Connectors for electronic equipment - Part 7-82: Detail specification for 8-way, 12 contacts, shielded, free and fixed connectors, for data transmission with frequencies up to 2 000 MHz

GSO IEC/PAS 61076-3-122:2016 电子设备连接器 产品要求 第3-122部分：坚固型 8 路、屏蔽、自由和固定连接器的详细规范

IEC/PAS 61076-3-122:2015(E) covers 8-way unshielded free and fixed connectors, and is intended to specify the common dimensions, mechanical, electrical and environmental characteristics and tests for the family of IEC 61076-3 connectors. These connectors are intermateable and interoperable with other IEC 61076-3 series connectors. This PAS is a technical specification not fulfilling the requirements for a standard, but made available to the public. Key words: Connectors, Free and Fixed Connectors, 8-way shielded connector.

Connectors for electronic equipment - Product requirements - Part 3-122: Detail specification for rugged 8-way, shielded, free and fixed connectors

JIS C 5402-12-2:2016 电子设备连接器. 试验和测量. 第12-2部分: 焊接试验. 试验12b: 采用铁湿钎焊法测定可焊性

Connectors for electronic equipment -- Tests and measurements -- Part 12-2: Soldering tests -- Test 12b: Solderability, wetting, soldering iron method

JIS C 5402-12-5:2016 电子设备连接器 试验和测量 第 12-5 部分：焊接试验 试验 12e：耐焊接热，烙铁法

Connectors for electronic equipment -- Tests and measurements -- Part 12-5: Soldering tests -- Test 12e: Resistance to soldering heat, soldering iron method

JIS C 5402-12-1:2016 电子设备连接器. 试验和测量. 第12-1部分: 焊接试验. 试验12a: 采用焊料湿浴法测定可焊性

Connectors for electronic equipment -- Tests and measurements -- Part 12-1: Soldering tests -- Test 12a: Solderability, wetting, solder bath method

JIS C 5402-12-4:2016 电子设备连接器. 试验和测量. 第12-4部分: 焊接试验. 试验12d: 采用焊料浴法测定耐焊接热

Connectors for electronic equipment -- Tests and measurements -- Part 12-4: Soldering tests -- Test 12d: Resistance to soldering heat, solder bath method

EN 61076-3-110:2016 电子设备连接器 产品要求 第 3-110 部分：用于频率高达 3 000 MHz 的数据传输的自由和固定连接器的详细规范

IEC 61076-3-110:2016 This detail specification covers mechanical, electrical and environmental requirements and electrical transmission requirements for frequencies up to 3 000 MHz. These connector's transmission requirements are specifically intended for specific pairs of contacts, which are separated from the other pairs of contacts, such as by means of individual pair shields within the connector. These connectors are similar to, intermateable with, and intended to be used with the IEC 60603-7 series connectors. The IEC 60603-7 series connectors are typically used in ISO/IEC 11801 balanced cabling systems. The ISO/IEC 11801 balanced cabling systems are organized by categories according to frequency range and by basic cabling component types, e.g. according to shielding configurations. A primary common feature among the IEC 60603-7 series connectors is backward compatibility to lower frequency categories. The IEC 61076-3-110 series connectors are backward compatible with IEC 60603-7-7, IEC 60603-7-71 and IEC 60603-7-82 connectors. The IEC 61076-3-110 series connectors are not backward compatible with some IEC 60603-7 series connectors. Key words: Connectors, Free and Fixed Data Transmission, 3000 MHz

Connectors for electronic equipment - Product requirements - Part 3-110: Detail specification for free and fixed connectors for data transmission with frequencies up to 3 000 MHz

IEC PAS 61076-3-124:2016 电子设备连接器.产品要求.第2-124部分:工业用输入/输出和千兆传输能力用10路屏蔽自由和固定连接器详细规范

Connectors for electronic equipment - Product requirements - Part 2-124: Detail specification for 10-way, shielded, free and fixed connectors for I/O and Gigabit transmission capability for industrial

DIN EN 60603-7-81:2016 电子设备连接器.第7-81部分:频率为2000 MHz及以下的数据传输用8路屏蔽活动和固定式连接器详细规格(IEC 60603-7-81-2015).德文版本EN 60603-7-81-2016

Connectors for electronic equipment - Part 7-81: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 2000 MHz (IEC 60603-7-81:2015); German version EN 60603-7-81:2016

GSO IEC 61076-1:2016 电子设备连接器 产品要求 第1部分：通用规范

Establishes uniform specifications and technical information for connectors. Is applicable to a family of connectors for use in electronic and electrical equipment; does not cover connectors designed for use at radio frequencies.

Connectors for electronic equipment - Product requirements - Part 1: Generic specification

IEC 60603-7-82:2016 电子设备连接器 - 第7-82部分:8路 12路触点 屏蔽 自由和固定连接器的详细规范 用于频率高达2 000 MHz的数据传输

This part of IEC 60603 covers 8-way@ 12 contacts@ shielded@ free and fixed connectors@ references dimensional@ mechanical@ electrical and environmental characteristics and tests in IEC 60603-7-7@ and specifies electrical transmission requirements@ including power sum alien (exogenous) crosstalk@ for frequencies up to 2 000 MHz. These connectors are typically used as ??category 8.2?? connectors in ??class II?? cabling systems specified in ISO/IEC TR 11801-9901 and specified in ISO/IEC 11801-11. These connectors are intermateable and interoperable with other IEC 60603-7 series connectors@ i.e. as defined in IEC 60603-7-7 and IEC 60603-7-1. These connectors are backward compatible with other IEC 60603-7 series connectors. NOTE Transmission performance categories: in this IEC standard@ the term ??category??@ when used in reference to transmission performance@ refers to those categories defined by ISO/IEC 11801-1. 1 Under consideration.

Connectors for electronic equipment - Part 7-82: Detail specification for 8-way, 12 contacts, shielded, free and fixed connectors, for data transmission with frequencies up to 2 000 MHz

IEC 61076-3-120:2016 电子设备连接器. 产品要求. 第3-120部分: 矩形连接器. 直流额定电压250 V, 额定电流30 A的带弹簧锁可重接电源连接器详细规格

This part of IEC 61076-3 describes a 2 pole 30 A rectangular power connector with snap locking (hereinafter shortly referred to as connector), including overall dimensions, interface dimensions, technical characteristics, performance requirements and test methods. The products covered by this detail specification are connectors without breaking capacity according to IEC 61984:2008 which are mainly for use in DC power distribution equipment in the telecommunications field, such as in outdoor telecom modules, distributed frames, etc.

Connectors for electronic equipment - Product requirements - Part 3-120: Rectangular connectors - Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A

BS PD IEC/PAS 61076-2-114:2016 电子设备连接器 产品要求 圆形连接器 M8螺纹锁紧的数据和电源连接器详细规范

Connectors for electronic equipment. Product requirements. Circular connectors. Detail specification for data and power connectors with M8 screw-locking

IEC PAS 61076-2-114:2016 电子设备连接器.产品要求.第2-114部分:圆形连接器.带M8螺钉锁紧的数据和电源连接器详细规范

Connectors for electronic equipment - Product requirements - Part 2-114: Circular connectors - Detail specification for data and power connectors with M8 screw-locking

BS EN 60603-7-81:2016 电子设备连接器. 用于频率高达2000 MHz的数据传输的8路屏蔽式活动和固定连接器的详细规格

Connectors for electronic equipment. Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 2 000 MHz

EN 60603-7-81:2016 电子设备连接器 第 7-81 部分：频率高达 2000 MHz 的数据传输用 8 路、屏蔽、自由和固定连接器的详细规范

IEC 60603-7-81:2015 Covers 8-way, shielded, free and fixed connectors, references dimensional, mechanical, electrical and environmental characteristics and tests in IEC 60603-7, and specifies electrical transmission requirements, including power sum alien (exogenous) crosstalk, for frequencies up to 2 000 MHz. These connectors are typically used as "category 8.1" connectors in "class I" cabling systems specified in ISO/IEC 11801. These connectors are intermateable and interoperable with other IEC 60603-7 series connectors as defined in Clause 2 of IEC 60603-7. These connectors are backward compatible with other IEC 60603-7 series connectors, except IEC 60603-7-7 and IEC 60603-7-71 connectors. Key words: Connectors, Shielded, Free and Fixed Connectors

Connectors for electronic equipment - Part 7-81: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 2 000 MHz

JIS C 5402-14-2:2016 电子设备连接器. 试验和测量. 第14-2部分: 密封试验. 试验14b: 密封. 细微漏气

Connectors for electronic equipment -- Tests and measurements -- Part 14-2: Sealing tests -- Test 14b: Sealing -- Fine air leakage

JIS C 5402-14-6:2016 电子设备连接器. 试验和测量. 第14-6部分: 密封试验. 试验14f: 层间的密封

Connectors for electronic equipment -- Tests and measurements -- Part 14-6: Sealing tests -- Test 14f: Interfacial sealing

JIS C 5402-14-4:2016 电子设备连接器. 试验和测量. 第14-4部分: 密封试验. 试验14d: 浸入. 防水

Connectors for electronic equipment -- Tests and measurements -- Part 14-4: Sealing tests -- Test 14d: Immersion -- Waterproof

JIS C 5402-14-5:2016 电子设备连接器. 试验和测量. 第14-5部分: 密封试验. 试验14e: 低气压下浸渍

Connectors for electronic equipment -- Tests and measurements -- Part 14-5: Sealing tests -- Test 14e: Immersion at low air pressure