31.220.10 插头和插座装置、连接器 标准查询与下载

IEC 63171-6:2020 电气和电子设备用连接器第6部分:频率达600MHz的电源和数据传输用屏蔽、自由和固定式2路和4路（数据/电源）连接器详细规范

Connectors for electrical and electronic equipment - Part 6: Detail specification for 2-way and 4-way (data/power), shielded, free and fixed connectors for power and data transmission with frequencies

KS C 6033-2019 电子设备用连接器通用规则

General rules of connectors for use in electronic equipment

KS C IEC 60603-5-2019 用于印制板的频率低于 3 MHz 的连接器 第5部分：用于间距 2.54 毫米（0.1 英寸）的双面印制板的边缘插座连接器和两部分连接器

Connectors for frequencies below 3 MHz for use with printed boards — Part 5: Edge-socket connectors and two-part connectors for double-sided printed boards with 2.54 mm(0.1 in) spacing

KS C IEC 60512-11-13-2019 电子设备连接器 试验和测量 第11-13部分：气候试验 试验 11n：气密性、无焊缠绕连接

Connectors for electronic equipment — Tests and measurements — Part 11-13: Climatic tests — Test 11n: Gas tightness, solderless wrapped connections

KS C IEC 61984-A-2019 连接器 安全要求和测试

Connectors — Safety requirements and tests

KS C IEC 60603-12-2019 用于印刷板的频率低于 3 MHz 的连接器 第12部分：设计用于集成电路的一系列插座的尺寸、一般要求和测试的详细规范

Connectors for frequencies below 3 MHz for use with printed boards — Part 12: Detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated circuits

KS C IEC 60603-2-2019 用于印刷板的频率低于 3 MHz 的连接器 第2部分：经过质量评估的两部分连接器的详细规范 用于印刷板 用于 2.54 毫米（0.1 英寸）的基本网格 具有通用安装功能

Connectors for frequencies below 3 MHz for use with printed boards — Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2.54 mm(0.1 in) with common mounting features

KS C IEC 60603-6-2019 用于印制板的频率低于 3 MHz 的连接器 第6部分：标称厚度为 1.6 毫米（0.063 英寸）的单面或双面印制板的边缘插座连接器和触点间距为 2.54 毫米（0.1 英寸）的印制板连接器

Connectors for frequencies below 3 MHz for use with printed boards — Part 6: Edge-socket connectors and printed-board connectors with 2.54 mm(0.1 in) contact spacing for single or double-sided printed boards of 1.6 mm(0.063 in) nominal thickness

EN IEC 60512-28-100:2019 电气和电子设备连接器 测试和测量 第 28-100 部分：高达 2000 MHz 的信号完整性测试 测试 28a 至 28g

IEC 60512-28-100:2019 is available as IEC 60512-28-100:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60512-28-100:2019 specifies the test methods for signal integrity and transmission performance for connectors specified in respective parts of IEC 60603-7, IEC 61076-1, IEC 61076-2, and IEC 61076-3 standards for connecting hardware applications up to 2 000 MHz. It is also suitable for testing lower frequency connectors, however, the test methodology specified in the detail specification for any given connector remains the reference conformance test for that connector. The above list of connector series of standards does not preclude referencing this document in other connector manufacturer’s specifications or published standards. Test procedures provided herein are: - insertion loss, test 28a; - return loss, test 28b; - near-end crosstalk (NEXT) test 28c; - far-end crosstalk (FEXT), test 28d; - transverse conversion loss (TCL), test 28f; - transverse conversion transfer loss (TCTL), test 28g. Other test procedures referenced herein are: - transfer impedance (ZT), see IEC 60512-26-100, test 26e. - for coupling attenuation (aC), see IEC 62153 4 12. This second edition cancels and replaces the first edition, issued in 2013, and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - The title is revised from 1 000 MHz to 2 000 MHz to reflect the range of frequencies which may be tested. - All tables and requirements have been revised up to 2 000 MHz. Key words: Connectors, Signal Integrity Tests

Connectors for electrical and electronic equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 2 000 MHz - Tests 28a to 28g

T/CECA 30-2019 M12T 系列 A 编码、D 编码推拉式圆形电连接器

本标准规定了 M12T 系列 A 编码、D 编码推拉式圆形电连接器的技术要求、试验和交货准备等。 本标准适用于与符合 GB/T 4588.4 的刚性多层印制板配用或适配电缆配用，接触件端接形式为印制板焊接或导线压接的连接器的设计、制造和交收。

M12T series A-code、D-code push-pull circular electrical connectors

T/CECA 31-2019 TL 系列推拉自锁高寿命小圆形电连接器规范

本标准规定了 TL 系列推拉自锁小圆形电连接器（TLFG、TLFN、TLFH、TLEG、TLEE、TLEC）的技术要求、试验和交货准备等。 本标准适用于 TL 系列推拉自锁小圆形电连接器（TLFG、TLFN、TLFH、TLEG、TLEE、TLEC）的设计、制造和交收。

Specification for TL Series Push-pull self-latching high life miniature circular electrical connectors

T/CECA 32-2019 HVDC-3T/Z-01/03 带电插拔电源连接器

本标准规定了通信用供电系统连接器的技术要求、试验方法和交付准备等。 本标准适用于 ICT 机柜内部用电压直流不超过 400VDC,交流不超过 380VAC，额定电流不超过 20A 的配电单元。

HVDC-3T/Z-01/03, hot plugging power connector

BS EN IEC 61076-3-123:2019 电气和电子设备连接器 产品要求 矩形连接器 用于工业环境、用于电源和光纤数据传输、推挽式的混合连接器的详细规范...

What is BS EN IEC 61076 ‑ 3 ‑ 123 - Rectangular connectors used in electronic equipment about?    BS EN IEC 61076 ‑ 3 ‑ 123 is one of the series of international standards used for connectors for electrical and electronic equipment that specifies the characteristics, measuring methods and procedures.    The test method helps in ensuring the sustaining of the rectangular connectors in different environmental conditions which result in producing good quality electronic equipment.    BS EN IEC 61076 ‑ 3 ‑ 123 covers hybrid rectangular connectors with 3 poles 16 A electric portion   for power supply and a duplex fibre optic connector type LC portion f...

Connectors for electrical and electronic equipment. Product requirements - Rectangular connectors. Detail specification for hybrid connectors for industrial environments, for power supply and fibre optic data transmission, with push-pull…

IEC 60512-28-100:2019 电气和电子设备用连接器.试验和测量.第28-100部分:2000兆赫以下的信号完整性试验.试验28a至28g

Connectors for electrical and electronic equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 2 000 MHz - Tests 28a to 28g

IEC 60512-28-100:2019 RLV 电气和电子设备用连接器.试验和测量.第28-100部分:2000MHz以下的信号完整性试验.试验28a至28g

Connectors for electrical and electronic equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 2 000 MHz - Tests 28a to 28g

T/CECA 33-2019 汽车变速器引线框架组件技术要求和试验方法

本标准规定了汽车变速器引线框架组件的技术要求和试验方法。 本标准适用于燃油汽车变速器引线框架组件的设计、制造和验收。

Technical requirements and test methods for the leadfream assembly of automotive

EN IEC 61076-3-123:2019 电气和电子设备连接器 产品要求 第 3-123 部分：矩形连接器 工业环境用混合连接器详细规范，用于电源和光纤数据传输，带推拉式定位

IEC 61076-3-123:2019. covers hybrid rectangular connectors with a 3 poles 16 A electric portion for power supply and a duplex fibre optic connector type LC portion for data transmission. These connectors consist of fixed and free connectors, either rewirable or non-rewirable (for both portions) and use the rectangular push-pull housing described in IEC 61076-3-117 with IP65/IP67 degree of protection, for harsh applications. The mating dimensions of such housings allow fulfilling the performance class Category I according to IEC 61753-1-3 in regards to the fibre optic portion of the connector with the exception of the operating temperature range which is –25 °C/+70 °C. The electric portion may have different rated insulation voltages. Male connectors have 3 electric round contacts Ø1,6 mm, with 16 A rated current. The fibre optic portion provides data transmission by using the common mating configurations for all variants of the type LC duplex fibre optic connectors as defined in IEC 61754-20, for dedicated fibre types and fibre termination technology covered therein. The different codings provided by this document prevent the mating of accordingly coded male or female connectors to any other similarly sized interfaces covered by other standards and the cross-mating between the different codings provided by this document. Key words: Rectangular Connectors, Hybrid Connectors, Power Supply and Fiber Optic Data Transmission.

Connectors for electrical and electronic equipment - Product requirements - Part 3-123: Rectangular connectors - Detail specification for hybrid connectors for industrial environments, for power supply and fibre optic data transmission, with push-pull loc

EN IEC 61169-24:2019 射频连接器 第24部分：分规范 带螺钉耦合的射频同轴连接器，通常用于 75 Ω 有线网络（F 型）

IEC 61169-24:2019 is available as IEC 61169-24:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61169-24:2019, which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for RF coaxial connectors with screw coupling, typically for use in 75 W cable networks (type F). It describes the interface dimensions with gauging information and the mandatory tests selected from IEC 61169-1, applicable to all DS relating to type F connectors. This specification indicates the recommended performance characteristics to be considered when writing a DS and covers test schedules and inspection requirements. This third edition cancels and replaces the second edition published in 2009. This edition includes the following significant technical changes with respect to the previous edition: all drawings have been reworked and improved to allow frequency extension up to 3 GHz.

Radio-frequency connectors - Part 24: Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 Ω cable networks (type F)

IEC 61169-24:2019 RLV 射频连接器第24部分:分规范典型用于75Ω电缆网络（F型）的带螺旋耦合的射频同轴连接器

Radio-frequency connectors - Part 24: Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 Ω cable networks (type F)

IEC 61169-24:2019 射频连接器.第24部分:分规范.75o电缆网络中典型使用的螺旋耦合射频同轴连接器（F型）

Radio-frequency connectors - Part 24: Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 Ω cable networks (type F)