43.060.10 标准查询与下载
共找到 351 条与 相关的标准，共 24 页
This document defines the measuring principles used for measuring piston pins; it applies to piston pins with a nominal outer diameter from 8 mm up to and including 100 mm, for reciprocating internal combustion engines for road vehicles and other applications. In certain applications, except road vehicles, and provided that mutual agreement is made between the purchaser and the manufacturer, this document can be used with suitable modifications.
Internal combustion engines — Piston pins — Part 2: Inspection measuring principles
- ICS
- 43.060.10
- CCS
- 发布
- 2020-04-24
- 实施
This document defines the measuring principles to be used for measuring piston rings; it applies to piston rings up to and including 200 mm diameter for reciprocating internal combustion engines. This document can be used for piston rings for compressors working under analogous conditions.
Internal combustion engines — Piston rings — Part 2: Inspection measuring principles
- ICS
- 43.060.10
- CCS
- 发布
- 2020-03-03
- 实施
This document specifies quality aspects that can be defined but that are not normally found on a drawing specification. It covers the following: — single-piece piston rings of grey cast iron or steel; — multi-piece piston rings (oil control rings) consisting of cast iron parts and spring components; and — single-piece and multi-piece oil control rings of steel, i.e. oil control rings in the form of strip steel components or steel segments (rails) with spring expander components. In addition to specifying some of the limits of acceptance relating to inspection measuring principles (covered by ISO 6621-2), this document also covers those features for which no recognized quantitative measurement procedures exist and which are only checked visually with normal eyesight (glasses if worn normally) and without magnification. Such features (superficial defects) are additional to the standard tolerances of ring width, radial wall thickness and closed gap. This document does not establish acceptable quality levels (AQL), it being left to manufacturer and customer to decide the appropriate levels jointly. In this case, the recommendations of ISO 2859-1 are followed. This document specifies the quality requirements of piston rings for reciprocating internal combustion engines for road vehicles and other applications. It is applicable to all such rings of a nominal diameter from 30 mm up to and including 200 mm.
Internal combustion engines — Piston rings — Part 5: Quality requirements
- ICS
- 43.060.10
- CCS
- 发布
- 2020-01-27
- 实施
What is ISO 6626-3 - Coil-spring-loaded oil-control piston rings about? ISO 6626 is a series of international standards on piston rings that discusses coil-spring-loaded oil control rings. ISO 6626-3 is the third part of the ISO 6626 series of documents that specifies the essential dimensions of coil-spring-loaded oil control rings made of steel, of piston ring types SOR (with R-shaped groove) and SOV (with V-shaped groove). ISO 6626-3 applies to coil-spring-loaded oil control rings made of steel with a diameter from 60 mm up to and including 160 mm for reciprocating internal combustion engines. It can also be used for piston rings in compressors working under analogous conditions.
Internal combustion engines. Piston rings - Coil-spring-loaded oil control rings made of steel
- ICS
- 43.060.10
- CCS
- 发布
- 2019-09-30
- 实施
- 2019-09-30
This document specifies the essential dimensions of coil-spring-loaded oil control rings made of steel, of piston ring typesISOR (with R-shaped groove) andISOV (with V-shaped groove). This document applies to coil-spring-loaded oil control rings made of steel with a diameter from 60 mm up to and including 160 mm for reciprocating internal combustion engines. It can also be used for piston rings in compressors working under analogous conditions.
Internal combustion engines — Piston rings — Part 3: Coil-spring-loaded oil control rings made of steel
- ICS
- 43.060.10
- CCS
- 发布
- 2019-09-22
- 实施
Internal combustion engines — Piston rings — Part 5: Quality requirements
- ICS
- 43.060.10
- CCS
- 发布
- 2019-08-19
- 实施
Internal combustion engines — Piston rings — Part 2: Inspection measuring principles
- ICS
- 43.060.10
- CCS
- 发布
- 2019-08-19
- 实施
Internal combustion engines — Piston rings — Part 3: Material specifications
- ICS
- 43.060.10
- CCS
- 发布
- 2019-08-19
- 实施
Internal combustion engines — Piston rings — Part 4: General specifications
- ICS
- 43.060.10
- CCS
- 发布
- 2019-08-19
- 实施
Internal combustion engines — Piston rings — Part 3: Material specifications
- ICS
- 43.060.10
- CCS
- 发布
- 2019-08-19
- 实施
Internal combustion engines — Piston rings — Part 2: Inspection measuring principles
- ICS
- 43.060.10
- CCS
- 发布
- 2019-08-19
- 实施
Internal combustion engines — Piston rings — Part 5: Quality requirements
- ICS
- 43.060.10
- CCS
- 发布
- 2019-08-19
- 实施
Internal combustion engines — Piston rings — Part 4: General specifications
- ICS
- 43.060.10
- CCS
- 发布
- 2019-08-19
- 实施
Internal combustion engines — Piston rings — Part 2: Coil-springloaded oil control rings of narrow width made of cast iron
- ICS
- 43.060.10
- CCS
- 发布
- 20190730
- 实施
- 20190730
Internal combustion engines — Piston rings — Part 2: Rectangular rings made of steel
- ICS
- 43.060.10
- CCS
- 发布
- 20190730
- 实施
- 20190730
Internal combustion engines — Piston rings — Expander/segment oil-control rings
- ICS
- 43.060.10
- CCS
- 发布
- 20190730
- 实施
- 20190730
Cylinder liners for automotive engines
- ICS
- 43.060.10
- CCS
- 发布
- 20190730
- 实施
- 20190730
Internal combustion engines — Piston rings — Scraper rings made of cast iron
- ICS
- 43.060.10
- CCS
- 发布
- 20190730
- 实施
- 20190730
Internal combustion engines — Piston rings — Part 1: Keystone rings made of cast iron
- ICS
- 43.060.10
- CCS
- 发布
- 2018-11-07
- 实施
Internal combustion engines — Piston rings — Part 2: Half keystone rings made of cast iron
- ICS
- 43.060.10
- CCS
- 发布
- 2018-11-07
- 实施
